[    0.000000] Linux version 6.1.11-amd64-desktop-hwe (uos@uos-PC) (gcc (Uos 11.2.0-10) 11.2.0, GNU ld (GNU Binutils for Uos) 2.38) #23.01.00.14 SMP PREEMPT_DYNAMIC Fri May 12 14:47:29 CST 2023
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.11-amd64-desktop-hwe root=UUID=c06348fb-fcd6-41c4-824a-1b0b3f70888f ro splash quiet DEEPIN_GFXMODE=
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca2cefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca2cf000-0x00000000ca4cefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ca4cf000-0x00000000ccbfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Lenovo
[    0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xca5c8000 MOKvar=0xc4c38000 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20BX001AUS/20BX001AUS, BIOS JBET72WW (1.36 ) 02/23/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.685 MHz processor
[    0.000809] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000813] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000821] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[    0.000938] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001498] last_pfn = 0xcce00 max_arch_pfn = 0x400000000
[    0.012159] esrt: Reserving ESRT space from 0x00000000ca5c8000 to 0x00000000ca5c8088.
[    0.012167] e820: update [mem 0xc4c38000-0xc4c38fff] usable ==> reserved
[    0.012185] Using GB pages for direct mapping
[    0.012547] Secure boot could not be determined
[    0.012547] RAMDISK: [mem 0x2acc7000-0x3165afff]
[    0.012550] ACPI: Early table checksum verification disabled
[    0.012554] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO)
[    0.012559] ACPI: XSDT 0x00000000CCDFE1C0 0000E4 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012565] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012572] ACPI: DSDT 0x00000000CCDE3000 010FA5 (v02 LENOVO TP-JB    00001360 INTL 20120711)
[    0.012577] ACPI: FACS 0x00000000CCD68000 000040
[    0.012580] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-JB    00001360 PTEC 00000001)
[    0.012584] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012588] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012592] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012596] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012600] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012604] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.012608] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.012612] ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.012616] ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[    0.012620] ACPI: SSDT 0x00000000CCDE0000 0006C9 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.012624] ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt  00003000 INTL 20120711)
[    0.012628] ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB    00001000 INTL 20120711)
[    0.012632] ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.012636] ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.012639] ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012643] ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.012647] ACPI: UEFI 0x00000000CCDD8000 000042 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012651] ACPI: MSDM 0x00000000CCD41000 000055 (v03 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012655] ACPI: BATB 0x00000000CCDD7000 00004A (v02 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012659] ACPI: FPDT 0x00000000CCDD6000 000064 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012663] ACPI: UEFI 0x00000000CCDD5000 00031E (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012667] ACPI: DMAR 0x00000000CCDD4000 0000B0 (v01 LENOVO TP-JB    00001360 PTEC 00000002)
[    0.012670] ACPI: Reserving FACP table memory at [mem 0xccdf8000-0xccdf810b]
[    0.012672] ACPI: Reserving DSDT table memory at [mem 0xccde3000-0xccdf3fa4]
[    0.012673] ACPI: Reserving FACS table memory at [mem 0xccd68000-0xccd6803f]
[    0.012674] ACPI: Reserving SLIC table memory at [mem 0xccdfd000-0xccdfd175]
[    0.012675] ACPI: Reserving ASF! table memory at [mem 0xccdfc000-0xccdfc0a4]
[    0.012676] ACPI: Reserving HPET table memory at [mem 0xccdfb000-0xccdfb037]
[    0.012677] ACPI: Reserving ECDT table memory at [mem 0xccdfa000-0xccdfa051]
[    0.012678] ACPI: Reserving APIC table memory at [mem 0xccdf7000-0xccdf7097]
[    0.012679] ACPI: Reserving MCFG table memory at [mem 0xccdf6000-0xccdf603b]
[    0.012680] ACPI: Reserving SSDT table memory at [mem 0xccdf5000-0xccdf5032]
[    0.012681] ACPI: Reserving SSDT table memory at [mem 0xccdf4000-0xccdf4485]
[    0.012682] ACPI: Reserving SSDT table memory at [mem 0xccde2000-0xccde29ca]
[    0.012684] ACPI: Reserving SSDT table memory at [mem 0xccde1000-0xccde1151]
[    0.012685] ACPI: Reserving SSDT table memory at [mem 0xccde0000-0xccde06c8]
[    0.012686] ACPI: Reserving SSDT table memory at [mem 0xccddf000-0xccddfb73]
[    0.012687] ACPI: Reserving SSDT table memory at [mem 0xccdde000-0xccdde368]
[    0.012688] ACPI: Reserving SSDT table memory at [mem 0xccddc000-0xccddd474]
[    0.012689] ACPI: Reserving SSDT table memory at [mem 0xccddb000-0xccddb393]
[    0.012690] ACPI: Reserving PCCT table memory at [mem 0xccdda000-0xccdda06d]
[    0.012691] ACPI: Reserving SSDT table memory at [mem 0xccdd9000-0xccdd9ac3]
[    0.012692] ACPI: Reserving UEFI table memory at [mem 0xccdd8000-0xccdd8041]
[    0.012694] ACPI: Reserving MSDM table memory at [mem 0xccd41000-0xccd41054]
[    0.012695] ACPI: Reserving BATB table memory at [mem 0xccdd7000-0xccdd7049]
[    0.012696] ACPI: Reserving FPDT table memory at [mem 0xccdd6000-0xccdd6063]
[    0.012697] ACPI: Reserving UEFI table memory at [mem 0xccdd5000-0xccdd531d]
[    0.012698] ACPI: Reserving DMAR table memory at [mem 0xccdd4000-0xccdd40af]
[    0.012748] No NUMA configuration found
[    0.012749] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[    0.012754] NODE_DATA(0) allocated [mem 0x22dffa000-0x22dffffff]
[    0.012781] Zone ranges:
[    0.012782]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012785]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012787]   Normal   [mem 0x0000000100000000-0x000000022dffffff]
[    0.012789]   Device   empty
[    0.012790] Movable zone start for each node
[    0.012791] Early memory node ranges
[    0.012791]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.012793]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
[    0.012794]   node   0: [mem 0x0000000000100000-0x00000000ca2cefff]
[    0.012796]   node   0: [mem 0x00000000ccdff000-0x00000000ccdfffff]
[    0.012797]   node   0: [mem 0x0000000100000000-0x000000022dffffff]
[    0.012799] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff]
[    0.012804] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012806] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012832] On node 0, zone DMA: 116 pages in unavailable ranges
[    0.018939] On node 0, zone DMA32: 11056 pages in unavailable ranges
[    0.028115] On node 0, zone Normal: 12800 pages in unavailable ranges
[    0.028195] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.028203] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
[    0.028473] ACPI: PM-Timer IO Port: 0x1808
[    0.028483] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.028485] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.028495] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.028499] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.028501] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.028507] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.028508] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.028513] TSC deadline timer available
[    0.028514] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.028532] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.028535] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.028537] PM: hibernation: Registered nosave memory: [mem 0x0008c000-0x0009ffff]
[    0.028538] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.028539] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.028541] PM: hibernation: Registered nosave memory: [mem 0xc4c38000-0xc4c38fff]
[    0.028543] PM: hibernation: Registered nosave memory: [mem 0xca2cf000-0xca4cefff]
[    0.028544] PM: hibernation: Registered nosave memory: [mem 0xca4cf000-0xccbfefff]
[    0.028545] PM: hibernation: Registered nosave memory: [mem 0xccbff000-0xccd7efff]
[    0.028546] PM: hibernation: Registered nosave memory: [mem 0xccd7f000-0xccdfefff]
[    0.028548] PM: hibernation: Registered nosave memory: [mem 0xcce00000-0xcdffffff]
[    0.028549] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xcfffffff]
[    0.028550] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf80f7fff]
[    0.028551] PM: hibernation: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.028551] PM: hibernation: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.028552] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.028553] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.028555] [mem 0xd0000000-0xf80f7fff] available for PCI devices
[    0.028557] Booting paravirtualized kernel on bare hardware
[    0.028560] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.028567] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.028938] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.028946] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.028949] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.028976] Fallback order for Node 0: 0 
[    0.028980] Built 1 zonelists, mobility grouping on.  Total pages: 2032564
[    0.028982] Policy zone: Normal
[    0.028984] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.11-amd64-desktop-hwe root=UUID=c06348fb-fcd6-41c4-824a-1b0b3f70888f ro splash quiet DEEPIN_GFXMODE=
[    0.029098] Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-6.1.11-amd64-desktop-hwe DEEPIN_GFXMODE=", will be passed to user space.
[    0.029121] random: crng init done
[    0.029794] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.030134] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.030236] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.030246] software IO TLB: area num 8.
[    0.065347] Memory: 7825880K/8259944K available (16392K kernel code, 2755K rwdata, 7444K rodata, 2396K init, 4924K bss, 433804K reserved, 0K cma-reserved)
[    0.065513] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.065528] Kernel/User page tables isolation: enabled
[    0.065546] ftrace: allocating 49373 entries in 193 pages
[    0.076225] ftrace: allocated 193 pages with 3 groups
[    0.076291] TT CPU scheduler v6.1 by Hamad Al Marri.
[    0.077121] Dynamic Preempt: voluntary
[    0.077165] rcu: Preemptible hierarchical RCU implementation.
[    0.077166] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.077168] 	Trampoline variant of Tasks RCU enabled.
[    0.077168] 	Rude variant of Tasks RCU enabled.
[    0.077169] 	Tracing variant of Tasks RCU enabled.
[    0.077169] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.077171] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.082810] NR_IRQS: 4352, nr_irqs: 760, preallocated irqs: 16
[    0.082999] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.083071] Console: colour dummy device 80x25
[    0.083092] printk: console [tty0] enabled
[    0.083117] ACPI: Core revision 20220331
[    0.083299] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.083312] APIC: Switch to symmetric I/O mode setup
[    0.083314] DMAR: Host address width 39
[    0.083316] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.083322] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.083325] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.083329] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.083331] DMAR: RMRR base: 0x000000ca68e000 end: 0x000000ca6a4fff
[    0.083333] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[    0.083334] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000cd800000-0x00000000cfffffff], contact BIOS vendor for fixes
[    0.083341] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000cd800000-0x00000000cfffffff]
               BIOS vendor: LENOVO; Ver: JBET72WW (1.36 ); Product Version: ThinkPad T450s
[    0.083345] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.083347] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.083348] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.083349] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.083972] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.083974] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.084594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.103315] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21139843abd, max_idle_ns: 440795210670 ns
[    0.103323] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.37 BogoMIPS (lpj=9178740)
[    0.103326] pid_max: default: 32768 minimum: 301
[    0.112212] LSM: Security Framework initializing
[    0.112225] Yama: becoming mindful.
[    0.112260] AppArmor: AppArmor initialized
[    0.112559] UOS Manager initialized: uosmanager
[    0.112607] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.112626] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.112895] CPU0: Thermal monitoring enabled (TM1)
[    0.112919] process: using mwait in idle threads
[    0.112921] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.112923] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.112928] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.112930] Spectre V2 : Mitigation: Retpolines
[    0.112931] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.112932] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.112933] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.112934] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.112936] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.112937] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.112941] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.112942] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.112942] MMIO Stale Data: Unknown: No mitigations
[    0.112943] SRBDS: Vulnerable: No microcode
[    0.134782] Freeing SMP alternatives memory: 40K
[    0.135397] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.135552] cblist_init_generic: Setting adjustable number of callback queues.
[    0.135555] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.135575] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.135592] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.135610] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.135634] ... version:                3
[    0.135635] ... bit width:              48
[    0.135636] ... generic registers:      4
[    0.135637] ... value mask:             0000ffffffffffff
[    0.135638] ... max period:             00007fffffffffff
[    0.135639] ... fixed-purpose events:   3
[    0.135640] ... event mask:             000000070000000f
[    0.135797] Estimated ratio of average max frequency by base frequency (times 1024): 1202
[    0.135822] rcu: Hierarchical SRCU implementation.
[    0.135823] rcu: 	Max phase no-delay instances is 1000.
[    0.136924] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.137021] smp: Bringing up secondary CPUs ...
[    0.137149] x86: Booting SMP configuration:
[    0.137151] .... node  #0, CPUs:      #1
[    0.137531] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.137531] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[    0.137531]  #2 #3
[    0.137531] smp: Brought up 1 node, 4 CPUs
[    0.137531] smpboot: Max logical packages: 2
[    0.137531] smpboot: Total of 4 processors activated (18357.48 BogoMIPS)
[    0.139893] devtmpfs: initialized
[    0.139893] x86/mm: Memory block size: 128MB
[    0.141087] ACPI: PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes)
[    0.141087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.141087] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.141087] pinctrl core: initialized pinctrl subsystem
[    0.141087] PM: RTC time: 09:39:12, date: 2023-05-17
[    0.141087] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.143446] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.143560] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.143675] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.143688] audit: initializing netlink subsys (disabled)
[    0.143700] audit: type=2000 audit(1684316352.060:1): state=initialized audit_enabled=0 res=1
[    0.143700] thermal_sys: Registered thermal governor 'fair_share'
[    0.143700] thermal_sys: Registered thermal governor 'bang_bang'
[    0.143700] thermal_sys: Registered thermal governor 'step_wise'
[    0.143700] thermal_sys: Registered thermal governor 'user_space'
[    0.143700] EISA bus registered
[    0.143700] cpuidle: using governor ladder
[    0.143700] cpuidle: using governor menu
[    0.143700] Detected 1 PCC Subspaces
[    0.143700] Registering PCC driver as Mailbox controller
[    0.143700] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.143700] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.143700] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.143700] PCI: not using MMCONFIG
[    0.143700] PCI: Using configuration type 1 for base access
[    0.143912] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.148436] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.148445] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.148445] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.148445] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.148445] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.148445] fbcon: Taking over console
[    0.148445] ACPI: Added _OSI(Module Device)
[    0.148445] ACPI: Added _OSI(Processor Device)
[    0.148445] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148445] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177072] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.177980] ACPI: EC: EC started
[    0.177981] ACPI: EC: interrupt blocked
[    0.179106] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.179107] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.179646] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.186611] ACPI Error: Needed type [Reference], found [Integer] (____ptrval____) (20220331/exresop-66)
[    0.186622] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20220331/dswexec-431)

[    0.186631] No Local Variables are initialized for Method [_PDC]

[    0.186633] Initialized Arguments for Method [_PDC]:  (1 arguments defined for method invocation)
[    0.186634]   Arg0:   (____ptrval____) <Obj>           Buffer(12) 01 00 00 00 01 00 00 00

[    0.186646] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
[    0.187136] ACPI: Dynamic OEM Table Load:
[    0.187146] ACPI: SSDT 0xFFFF9463412CE800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.188565] ACPI: Dynamic OEM Table Load:
[    0.188574] ACPI: SSDT 0xFFFF946340F9E600 000119 (v02 PmRef  ApCst    00003000 INTL 20120711)
[    0.190408] ACPI: Interpreter enabled
[    0.190447] ACPI: PM: (supports S0 S3 S4 S5)
[    0.190448] ACPI: Using IOAPIC for interrupt routing
[    0.190487] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.191052] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.191065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.191066] PCI: Using E820 reservations for host bridge windows
[    0.191380] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.195296] ACPI: PM: Power Resource [PUBS]
[    0.195892] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.196130] ACPI: PM: Power Resource [NVP3]
[    0.196164] ACPI: PM: Power Resource [NVP2]
[    0.201558] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.201659] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.201661] ACPI: PCI: Interrupt link LNKB disabled
[    0.201758] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.201759] ACPI: PCI: Interrupt link LNKC disabled
[    0.201855] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.201856] ACPI: PCI: Interrupt link LNKD disabled
[    0.201952] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.201953] ACPI: PCI: Interrupt link LNKE disabled
[    0.202048] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.202049] ACPI: PCI: Interrupt link LNKF disabled
[    0.202145] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.202146] ACPI: PCI: Interrupt link LNKG disabled
[    0.202241] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.202242] ACPI: PCI: Interrupt link LNKH disabled
[    0.202370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.202376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.202489] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[    0.202585] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.202587] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.202589] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.202591] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT)
[    0.202903] PCI host bridge to bus 0000:00
[    0.202905] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.202907] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.202909] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.202911] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.202913] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.202915] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.202931] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.203009] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.203019] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.203026] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.203031] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.203045] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.203047] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.203051] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.203150] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.203160] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit]
[    0.203280] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.203295] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[    0.203366] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.203469] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.203487] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit]
[    0.203553] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.203616] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[    0.203628] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
[    0.203636] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff]
[    0.203643] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.203696] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.203776] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.203791] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit]
[    0.203846] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.203930] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
[    0.204005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.204466] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
[    0.204551] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.205009] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.205025] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff]
[    0.205109] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.205215] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.205416] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.205427] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.205434] pci 0000:00:1f.2: reg 0x14: [io  0x30bc-0x30bf]
[    0.205441] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.205448] pci 0000:00:1f.2: reg 0x1c: [io  0x30b8-0x30bb]
[    0.205454] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.205461] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff]
[    0.205494] pci 0000:00:1f.2: PME# supported from D3hot
[    0.205572] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.205587] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit]
[    0.205606] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.205697] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.205724] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit]
[    0.205922] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.205946] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
[    0.206104] pci 0000:02:00.0: supports D1 D2
[    0.206106] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.206309] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.206314] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.206596] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[    0.206684] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
[    0.207096] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.207707] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.207712] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.209276] ACPI: EC: interrupt unblocked
[    0.209278] ACPI: EC: event unblocked
[    0.209284] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.209285] ACPI: EC: GPE=0x25
[    0.209287] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
[    0.209289] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
[    0.209374] iommu: Default domain type: Translated 
[    0.209374] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.209374] SCSI subsystem initialized
[    0.209374] libata version 3.00 loaded.
[    0.209374] ACPI: bus type USB registered
[    0.209374] usbcore: registered new interface driver usbfs
[    0.209374] usbcore: registered new interface driver hub
[    0.209374] usbcore: registered new device driver usb
[    0.209374] pps_core: LinuxPPS API ver. 1 registered
[    0.209374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.209374] PTP clock support registered
[    0.209374] EDAC MC: Ver: 3.0.0
[    0.209374] Registered efivars operations
[    0.209374] NetLabel: Initializing
[    0.209374] NetLabel:  domain hash size = 128
[    0.209374] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.209374] NetLabel:  unlabeled traffic allowed by default
[    0.209374] PCI: Using ACPI for IRQ routing
[    0.209374] PCI: pci_cache_line_size set to 64 bytes
[    0.209374] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.209374] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[    0.209374] e820: reserve RAM buffer [mem 0xc4c38000-0xc7ffffff]
[    0.209374] e820: reserve RAM buffer [mem 0xca2cf000-0xcbffffff]
[    0.209374] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff]
[    0.209374] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[    0.211329] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.211332] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.211335] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.211341] vgaarb: loaded
[    0.211376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.211385] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.213419] clocksource: Switched to clocksource tsc-early
[    0.213556] VFS: Disk quotas dquot_6.6.0
[    0.213572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.213699] AppArmor: AppArmor Filesystem Enabled
[    0.213718] pnp: PnP ACPI init
[    0.214297] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000d4000-0x000d7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.214297] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.214297] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.214297] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.214297] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.214297] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.214297] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.214297] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.214297] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.214297] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.214297] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.214297] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.214297] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.214297] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.214297] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.214297] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.214297] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.214297] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.214297] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.214297] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.214297] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.214297] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.214297] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.214297] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.214297] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.214297] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.214297] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.214297] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.214297] system 00:05: [mem 0xd0010000-0xd001ffff] has been reserved
[    0.214297] system 00:05: [mem 0xd0000000-0xd000ffff] has been reserved
[    0.214297] pnp: PnP ACPI: found 6 devices
[    0.220356] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.220471] NET: Registered PF_INET protocol family
[    0.220605] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.222515] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.222556] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.222620] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.222889] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.223240] TCP: Hash tables configured (established 65536 bind 65536)
[    0.223295] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.223339] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.223412] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.223420] NET: Registered PF_XDP protocol family
[    0.223434] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.223441] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.223448] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.223453] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.223461] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.223463] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.223465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.223467] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
[    0.223468] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.223470] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
[    0.223472] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
[    0.224122] PCI: CLS 64 bytes, default 64
[    0.224145] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.224146] software IO TLB: mapped [mem 0x00000000bb0a0000-0x00000000bf0a0000] (64MB)
[    0.224217] Trying to unpack rootfs image as initramfs...
[    0.232388] Initialise system trusted keyrings
[    0.232403] Key type blacklist registered
[    0.232460] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.235724] zbud: loaded
[    0.236427] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.236668] fuse: init (API version 7.37)
[    0.236926] integrity: Platform Keyring initialized
[    0.249632] Key type asymmetric registered
[    0.249634] Asymmetric key parser 'x509' registered
[    1.235332] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[    1.235344] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
[    1.235485] clocksource: Switched to clocksource tsc
[    2.023557] Freeing initrd memory: 108112K
[    2.025912] modprobe (63) used greatest stack depth: 13616 bytes left
[    2.028064] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    2.028099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    2.028102] io scheduler mq-deadline registered
[    2.029023] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.030054] ACPI: AC: AC Adapter [AC] (on-line)
[    2.030153] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.030213] ACPI: button: Lid Switch [LID]
[    2.030272] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.030321] ACPI: button: Sleep Button [SLPB]
[    2.030398] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.030447] ACPI: button: Power Button [PWRF]
[    2.032735] thermal LNXTHERM:00: registered as thermal_zone0
[    2.032740] ACPI: thermal: Thermal Zone [THM0] (58 C)
[    2.033207] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.046382] ACPI: battery: Slot [BAT0] (battery present)
[    2.048959] Linux agpgart interface v0.103
[    2.059270] ACPI: battery: Slot [BAT1] (battery present)
[    2.059307] loop: module loaded
[    2.059718] ahci 0000:00:1f.2: version 3.0
[    2.070003] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    2.070010] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    2.070526] scsi host0: ahci
[    2.070738] scsi host1: ahci
[    2.070890] scsi host2: ahci
[    2.070964] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 44
[    2.070967] ata2: DUMMY
[    2.070969] ata3: DUMMY
[    2.071231] tun: Universal TUN/TAP device driver, 1.6
[    2.071284] PPP generic driver version 2.4.2
[    2.071386] VFIO - User Level meta-driver version: 0.3
[    2.071571] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.071577] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.071588] ehci-pci 0000:00:1d.0: debug port 2
[    2.075496] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000
[    2.095329] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.095384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    2.095387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.095389] usb usb1: Product: EHCI Host Controller
[    2.095390] usb usb1: Manufacturer: Linux 6.1.11-amd64-desktop-hwe ehci_hcd
[    2.095392] usb usb1: SerialNumber: 0000:00:1d.0
[    2.095538] hub 1-0:1.0: USB hub found
[    2.095546] hub 1-0:1.0: 3 ports detected
[    2.096077] usbcore: registered new interface driver usbserial_generic
[    2.096083] usbserial: USB Serial support registered for generic
[    2.096121] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.097603] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.097609] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.097778] mousedev: PS/2 mouse device common for all mice
[    2.097961] usbcore: registered new interface driver bcm5974
[    2.098025] rtc_cmos 00:02: RTC can wake from S4
[    2.098298] rtc_cmos 00:02: registered as rtc0
[    2.098332] rtc_cmos 00:02: setting system clock to 2023-05-17T09:39:14 UTC (1684316354)
[    2.098357] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    2.098367] i2c_dev: i2c /dev entries driver
[    2.098441] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.098471] device-mapper: uevent: version 1.0.3
[    2.098561] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.098583] platform eisa.0: Probing EISA bus 0
[    2.098585] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.098587] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.098588] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.098590] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.098591] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.098592] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.098594] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.098595] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.098596] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.098597] platform eisa.0: EISA: Detected 0 cards
[    2.098606] intel_pstate: Intel P-state driver initializing
[    2.098950] ledtrig-cpu: registered to indicate activity on CPUs
[    2.098978] efifb: probing for efifb
[    2.098990] efifb: No BGRT, not showing boot graphics
[    2.098991] efifb: framebuffer at 0xe0000000, using 1216k, total 1216k
[    2.098993] efifb: mode is 640x480x32, linelength=2560, pages=1
[    2.098994] efifb: scrolling: redraw
[    2.098995] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.099095] Console: switching to colour frame buffer device 80x30
[    2.099298] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.099415] fb0: EFI VGA frame buffer device
[    2.099452] hid: raw HID events driver (C) Jiri Kosina
[    2.099602] drop_monitor: Initializing network drop monitor service
[    2.099750] NET: Registered PF_INET6 protocol family
[    2.104913] Segment Routing with IPv6
[    2.104932] In-situ OAM (IOAM) with IPv6
[    2.104967] NET: Registered PF_PACKET protocol family
[    2.104999] Key type dns_resolver registered
[    2.105005] start plist test
[    2.106526] end plist test
[    2.106883] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[    2.106899] microcode: Microcode Update Driver: v2.2.
[    2.106904] IPI shorthand broadcast: enabled
[    2.106941] sched_clock: Marking stable (2106483500, 288170)->(2135817096, -29045426)
[    2.107195] registered taskstats version 1
[    2.107245] Loading compiled-in X.509 certificates
[    2.108312] Loaded X.509 cert 'Build time autogenerated kernel key: 57b5ae872604c2f13035b1021f57aa23287e6bee'
[    2.108629] zswap: loaded using pool lzo/zbud
[    2.108764] Key type .fscrypt registered
[    2.108767] Key type fscrypt-provisioning registered
[    2.114105] Key type encrypted registered
[    2.114113] AppArmor: AppArmor sha1 policy hashing enabled
[    2.114507] integrity: Loading X.509 certificate: UEFI:db
[    2.114553] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    2.114555] integrity: Loading X.509 certificate: UEFI:db
[    2.114587] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    2.114589] integrity: Loading X.509 certificate: UEFI:db
[    2.114611] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949'
[    2.114612] integrity: Loading X.509 certificate: UEFI:db
[    2.114634] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f'
[    2.115219] ima: No TPM chip found, activating TPM-bypass!
[    2.115222] Loading compiled-in module X.509 certificates
[    2.115854] Loaded X.509 cert 'Build time autogenerated kernel key: 57b5ae872604c2f13035b1021f57aa23287e6bee'
[    2.115858] ima: Allocated hash algorithm: sha256
[    2.115866] ima: No architecture policies found
[    2.115878] evm: Initialising EVM extended attributes:
[    2.115879] evm: security.selinux
[    2.115880] evm: security.SMACK64
[    2.115881] evm: security.SMACK64EXEC
[    2.115881] evm: security.SMACK64TRANSMUTE
[    2.115882] evm: security.SMACK64MMAP
[    2.115882] evm: security.apparmor
[    2.115883] evm: security.ima
[    2.115884] evm: security.capability
[    2.115884] evm: HMAC attrs: 0x1
[    2.117241] PM:   Magic number: 7:357:677
[    2.117428] RAS: Correctable Errors collector initialized.
[    2.351326] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.385694] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.391053] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[    2.397848] ata1.00: ATA-9: Colorful SL500 720GB, R0327B0, max UDMA/133
[    2.401087] ata1.00: 1406546694 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.411191] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[    2.421366] ata1.00: configured for UDMA/133
[    2.431510] scsi 0:0:0:0: Direct-Access     ATA      Colorful SL500 7 7B0  PQ: 0 ANSI: 5
[    2.431767] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.431801] sd 0:0:0:0: [sda] 1406546694 512-byte logical blocks: (720 GB/671 GiB)
[    2.431817] sd 0:0:0:0: [sda] Write Protect is off
[    2.431820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.431847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.431882] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    2.448796]  sda: sda1 sda2 sda3 sda4 sda5
[    2.448942] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.450383] Freeing unused decrypted memory: 2036K
[    2.450751] Freeing unused kernel image (initmem) memory: 2396K
[    2.463347] Write protecting the kernel read-only data: 26624k
[    2.463785] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    2.463932] Freeing unused kernel image (rodata/data gap) memory: 748K
[    2.507685] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[    2.507689] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.508001] hub 1-1:1.0: USB hub found
[    2.508071] hub 1-1:1.0: 8 ports detected
[    2.513252] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.513254] x86/mm: Checking user space page tables
[    2.558894] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.558898] Run /init as init process
[    2.558899]   with arguments:
[    2.558900]     /init
[    2.558901]     splash
[    2.558901]   with environment:
[    2.558902]     HOME=/
[    2.558903]     TERM=linux
[    2.558903]     BOOT_IMAGE=/vmlinuz-6.1.11-amd64-desktop-hwe
[    2.558904]     DEEPIN_GFXMODE=
[    2.560225] mkdir (150) used greatest stack depth: 13584 bytes left
[    2.577577] systemd-udevd (169) used greatest stack depth: 13288 bytes left
[    2.658245] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.658254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.659305] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    2.659553] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.659558] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.659562] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.659615] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    2.659618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.659621] usb usb2: Product: xHCI Host Controller
[    2.659623] usb usb2: Manufacturer: Linux 6.1.11-amd64-desktop-hwe xhci-hcd
[    2.659625] usb usb2: SerialNumber: 0000:00:14.0
[    2.666553] e1000e: Intel(R) PRO/1000 Network Driver
[    2.666556] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.667000] hub 2-0:1.0: USB hub found
[    2.667018] hub 2-0:1.0: 11 ports detected
[    2.669219] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    2.669224] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.669227] usb usb3: Product: xHCI Host Controller
[    2.669229] usb usb3: Manufacturer: Linux 6.1.11-amd64-desktop-hwe xhci-hcd
[    2.669231] usb usb3: SerialNumber: 0000:00:14.0
[    2.669379] hub 3-0:1.0: USB hub found
[    2.669390] hub 3-0:1.0: 4 ports detected
[    2.670817] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.715769] ACPI: bus type drm_connector registered
[    2.716168] cryptd: max_cpu_qlen set to 1000
[    2.718671] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.718704] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.722718] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    2.724423] AVX2 version of gcm_enc/dec engaged.
[    2.724463] AES CTR mode by8 optimization enabled
[    2.725050] i2c i2c-0: Successfully instantiated SPD at 0x50
[    2.859674] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    2.922262] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:59:c5:cf
[    2.922266] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.922298] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    2.927327] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[    3.093673] mmc0: new high speed SDHC card at address 87a5
[    3.104922] usb 2-3: New USB device found, idVendor=3151, idProduct=3020, bcdDevice= 0.02
[    3.104927] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.104930] usb 2-3: Product: Wireless Device
[    3.104932] usb 2-3: Manufacturer: YICHIP
[    3.145454] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    3.152505] mmcblk0: mmc0:87a5 SE16G 14.6 GiB 
[    3.153253] Console: switching to colour dummy device 80x25
[    3.153325] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.153639]  mmcblk0: p1
[    3.154507] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.173315] usbcore: registered new interface driver usbhid
[    3.173318] usbhid: USB HID core driver
[    3.175048] usbcore: registered new interface driver usbmouse
[    3.175050] usbcore: registered new interface driver usbkbd
[    3.177907] input: YICHIP Wireless Device as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:3151:3020.0001/input/input6
[    3.205715] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.206720] ACPI: video: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.207076] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.235449] hid-generic 0003:3151:3020.0001: input,hidraw0: USB HID v2.00 Keyboard [YICHIP Wireless Device] on usb-0000:00:14.0-3/input0
[    3.235795] input: YICHIP Wireless Device Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:3151:3020.0002/input/input8
[    3.235952] input: YICHIP Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:3151:3020.0002/input/input9
[    3.243337] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[    3.295505] input: YICHIP Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:3151:3020.0002/input/input10
[    3.295639] hid-generic 0003:3151:3020.0002: input,hiddev0,hidraw1: USB HID v2.00 Mouse [YICHIP Wireless Device] on usb-0000:00:14.0-3/input1
[    3.392631] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[    3.392636] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.392638] usb 2-6: SerialNumber: b98b4dce74fb
[    3.433400] fbcon: i915drmfb (fb0) is primary device
[    3.474511] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    3.504684] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    3.504692] psmouse serio1: synaptics: Trying to set up SMBus access
[    3.519389] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[    3.668855] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    3.668860] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.795373] usb 2-8: new high-speed USB device number 5 using xhci_hcd
[    3.985460] usb 2-8: New USB device found, idVendor=04f2, idProduct=b449, bcdDevice= 0.44
[    3.985465] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.985466] usb 2-8: Product: Integrated Camera
[    3.985468] usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd.
[    3.985469] usb 2-8: SerialNumber: 0x0001
[    4.452046] Console: switching to colour frame buffer device 240x67
[    4.470749] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    5.107340] raid6: avx2x4   gen() 27237 MB/s
[    5.175342] raid6: avx2x2   gen() 27427 MB/s
[    5.243342] raid6: avx2x1   gen() 25122 MB/s
[    5.243343] raid6: using algorithm avx2x2 gen() 27427 MB/s
[    5.311340] raid6: .... xor() 16231 MB/s, rmw enabled
[    5.311341] raid6: using avx2x2 recovery algorithm
[    5.312260] xor: automatically using best checksumming function   avx       
[    5.386967] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    5.498112] btrfs (257) used greatest stack depth: 13264 bytes left
[    5.528558] PM: Image not found (code -22)
[    5.558774] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[    5.558906] mount (284) used greatest stack depth: 13168 bytes left
[    5.582444] initrd-recovery (291) used greatest stack depth: 13056 bytes left
[    5.596418] systemd-udevd (195) used greatest stack depth: 12800 bytes left
[    5.596456] systemd-udevd (183) used greatest stack depth: 11152 bytes left
[    5.732914] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[    5.736335] EXT4-fs (sda2): unmounting filesystem.
[    5.895686] systemd[1]: Inserted module 'autofs4'
[    6.088129] systemd[1]: systemd 250.4.2-deepin2+rb2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    6.088238] systemd[1]: Detected architecture x86-64.
[    6.088662] systemd[1]: Hostname set to <zhangben-PC>.
[    6.241022] systemd[1]: /lib/systemd/system/deepin-accounts1-daemon.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    6.283167] systemd[1]: Queued start job for default target Graphical Interface.
[    6.312029] systemd[1]: Created slice Slice /system/getty.
[    6.312440] systemd[1]: Created slice Slice /system/modprobe.
[    6.312716] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.312924] systemd[1]: Created slice User and Session Slice.
[    6.312998] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.313172] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.313237] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.313262] systemd[1]: Reached target User and Group Name Lookups.
[    6.313276] systemd[1]: Reached target Remote File Systems.
[    6.313287] systemd[1]: Reached target Slice Units.
[    6.313317] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.313396] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.313508] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.313590] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.313639] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    6.313783] systemd[1]: Listening on Journal Audit Socket.
[    6.313884] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.313995] systemd[1]: Listening on Journal Socket.
[    6.314115] systemd[1]: Listening on udev Control Socket.
[    6.314209] systemd[1]: Listening on udev Kernel Socket.
[    6.315008] systemd[1]: Mounting Huge Pages File System...
[    6.316091] systemd[1]: Mounting POSIX Message Queue File System...
[    6.317391] systemd[1]: Mounting Kernel Debug File System...
[    6.318652] systemd[1]: Mounting Kernel Trace File System...
[    6.318937] systemd[1]: Finished Availability of block devices.
[    6.320578] systemd[1]: Starting Create List of Static Device Nodes...
[    6.321877] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.323350] systemd[1]: Starting Load Kernel Module configfs...
[    6.324791] systemd[1]: Starting Load Kernel Module drm...
[    6.326588] systemd[1]: Starting Load Kernel Module fuse...
[    6.326769] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    6.329112] systemd[1]: Starting Journal Service...
[    6.331621] systemd[1]: Starting Load Kernel Modules...
[    6.333061] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.333188] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    6.334565] systemd[1]: Starting Coldplug All udev Devices...
[    6.337867] systemd[1]: Mounted Huge Pages File System.
[    6.338077] systemd[1]: Mounted POSIX Message Queue File System.
[    6.338239] systemd[1]: Mounted Kernel Debug File System.
[    6.338406] systemd[1]: Mounted Kernel Trace File System.
[    6.338734] systemd[1]: Finished Create List of Static Device Nodes.
[    6.339185] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.339454] systemd[1]: Finished Load Kernel Module configfs.
[    6.339926] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.340144] systemd[1]: Finished Load Kernel Module drm.
[    6.340580] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.340799] systemd[1]: Finished Load Kernel Module fuse.
[    6.342590] systemd[1]: Mounting FUSE Control File System...
[    6.343994] systemd[1]: Mounting Kernel Configuration File System...
[    6.347641] systemd[1]: Mounted Kernel Configuration File System.
[    6.348141] systemd[1]: Mounted FUSE Control File System.
[    6.351443] EXT4-fs (sda4): re-mounted. Quota mode: none.
[    6.352637] systemd-journald[380]: /etc/systemd/journald.conf:15: Assignment outside of section. Ignoring.
[    6.353016] systemd[1]: Finished Remount Root and Kernel File Systems.
[    6.354644] systemd[1]: Starting Create System Users...
[    6.370601] systemd[1]: Finished Create System Users.
[    6.371761] lp: driver loaded but no devices found
[    6.372035] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.376865] ppdev: user-space parallel port driver
[    6.381740] systemd[1]: Finished Load Kernel Modules.
[    6.383248] systemd[1]: Starting Apply Kernel Variables...
[    6.396687] systemd[1]: Finished Apply Kernel Variables.
[    6.409764] systemd[1]: Finished Create Static Device Nodes in /dev.
[    6.423841] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    6.424078] systemd[1]: Started Journal Service.
[    6.718025] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.718613] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.720906] Non-volatile memory driver v1.3
[    6.723245] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    6.741137] Intel(R) Wireless WiFi driver for Linux
[    6.743673] at24 0-0050: supply vcc not found, using dummy regulator
[    6.744804] mc: Linux media interface: v0.10
[    6.745065] at24 0-0050: 256 byte spd EEPROM, read-only
[    6.746101] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    6.746105] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.746106] thinkpad_acpi: ThinkPad BIOS JBET72WW (1.36 ), EC JBHT17WW
[    6.746108] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BX001AUS
[    6.750472] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[    6.750479] iwlwifi 0000:03:00.0: Found debug configuration: 0
[    6.750888] iwlwifi 0000:03:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[    6.754608] thinkpad_acpi: radio switch found; radios are enabled
[    6.754621] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    6.754623] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    6.759065] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    6.766081] videodev: Linux video capture interface: v2.00
[    6.775764] iTCO_vendor_support: vendor-support=0
[    6.800907] thinkpad_acpi: battery 2 registered (start 0, stop 100, behaviours: 0x7)
[    6.807420] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x7)
[    6.810143] ACPI: battery: new extension: ThinkPad Battery Extension
[    6.813987] iTCO_wdt iTCO_wdt.1.auto: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    6.819365] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    6.840235] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[    6.850365] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.862554] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    6.862687] thermal thermal_zone2: failed to read out thermal zone (-61)
[    6.879045] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    6.883358] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    6.884074] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    6.931131] usb 2-8: Found UVC 1.00 device Integrated Camera (04f2:b449)
[    6.931677] iwlwifi 0000:03:00.0: base HW address: 18:5e:0f:13:02:54, OTP minor version: 0x0
[    6.932181] =====================
[    6.932186] pcspkr registering...
[    6.932189] CPU: 0 PID: 422 Comm: systemd-udevd Tainted: G          I        6.1.11-amd64-desktop-hwe #23.01.00.14
[    6.932193] Hardware name: LENOVO 20BX001AUS/20BX001AUS, BIOS JBET72WW (1.36 ) 02/23/2019
[    6.932195] Call Trace:
[    6.932198]  <TASK>
[    6.932201]  dump_stack_lvl+0x49/0x63
[    6.932209]  dump_stack+0x10/0x16
[    6.932214]  driver_register.cold+0x1d/0x8e
[    6.932220]  ? 0xffffffffc068e000
[    6.932223]  __platform_driver_register+0x1e/0x30
[    6.932228]  pcspkr_platform_driver_init+0x1c/0x1000 [pcspkr]
[    6.932286]  do_one_initcall+0x48/0x210
[    6.932292]  ? kmalloc_trace+0x2a/0xa0
[    6.932298]  do_init_module+0x52/0x210
[    6.932303]  load_module+0x1fe7/0x20e0
[    6.932307]  ? ima_post_read_file+0xcf/0xe0
[    6.932317]  __do_sys_finit_module+0xc8/0x140
[    6.932322]  ? __do_sys_finit_module+0xc8/0x140
[    6.932329]  __x64_sys_finit_module+0x18/0x20
[    6.932333]  do_syscall_64+0x3b/0xc0
[    6.932337]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[    6.932341] RIP: 0033:0x7f381f9038d9
[    6.932345] Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 f5 0e 00 f7 d8 64 89 01 48
[    6.932348] RSP: 002b:00007fffc50f5cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    6.932351] RAX: ffffffffffffffda RBX: 000055d79a394390 RCX: 00007f381f9038d9
[    6.932354] RDX: 0000000000000000 RSI: 00007f381fcabf0d RDI: 0000000000000006
[    6.932356] RBP: 0000000000020000 R08: 0000000000000000 R09: 000055d79a2bb090
[    6.932358] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f381fcabf0d
[    6.932360] R13: 0000000000000000 R14: 000055d79a39adc0 R15: 000055d79a394390
[    6.932364]  </TASK>
[    6.932367] =====================
[    6.932906] Bluetooth: Core ver 2.22
[    6.932934] NET: Registered PF_BLUETOOTH protocol family
[    6.932937] Bluetooth: HCI device and connection manager initialized
[    6.932941] Bluetooth: HCI socket layer initialized
[    6.932944] Bluetooth: L2CAP socket layer initialized
[    6.932951] Bluetooth: SCO socket layer initialized
[    6.938933] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18
[    6.939028] usbcore: registered new interface driver uvcvideo
[    6.942620] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    6.942838] input: PC Speaker as /devices/platform/pcspkr/input/input17
[    6.944807] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.944815] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.944818] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    6.944821] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    6.944823] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    6.944826] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[    6.944828] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[    6.944830] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    6.946204] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    6.947955] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    6.965508] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3053-004, fw id: 1741117
[    6.976962] pstore: Using crash dump compression: deflate
[    7.000897] iwlwifi 0000:03:00.0: iwlmvm doesn't allow to disable BT Coex, check bt_coex_active module parameter
[    7.126283] pstore: Registered efi as persistent store backend
[    7.133123] usbcore: registered new interface driver btusb
[    7.133192] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.148417] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014
[    7.148424] Bluetooth: hci0: Intel device is already patched. patch num: 32
[    7.197024] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    7.197456] input: Synaptics TM3053-004 as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-002c/rmi4-00/input/input16
[    7.197754] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    7.209283] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[    7.219488] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    7.221147] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    7.267614] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    7.267619] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.267622] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.267623] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.267625] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.408863] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    7.444205] intel_rapl_common: Found RAPL domain package
[    7.444210] intel_rapl_common: Found RAPL domain core
[    7.444212] intel_rapl_common: Found RAPL domain uncore
[    7.444214] intel_rapl_common: Found RAPL domain dram
[    7.488431] Adding 8210428k swap on /dev/sda3.  Priority:-2 extents:1 across:8210428k SSFS
[    7.573269] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[    7.589924] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: none.
[    7.643156] systemd-journald[380]: Received client request to flush runtime journal.
[    8.011203] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.011209] Bluetooth: BNEP filters: protocol multicast
[    8.011215] Bluetooth: BNEP socket layer initialized
[    8.015126] Bluetooth: MGMT ver 1.22
[    8.022879] NET: Registered PF_ALG protocol family
[    8.516828] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    8.597232] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    8.600892] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[    8.617656] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617664] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617667] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617670] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617673] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617676] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.617679] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.683008] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    8.770446] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[    8.771797] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[    8.779914] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779921] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779924] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779927] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779930] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779933] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.779936] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[    8.892879] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[   11.003444] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   11.615617] input: TPPS/2 IBM TrackPoint as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-002c/rmi4-00/rmi4-00.fn03/serio2/input/input23
[   11.823349] psmouse serio2: Failed to enable mouse on rmi4-00.fn03/serio0
[   12.293596] wlp3s0: authenticate with d4:8f:a2:bf:78:bc
[   12.299576] wlp3s0: send auth to d4:8f:a2:bf:78:bc (try 1/3)
[   12.301869] wlp3s0: authenticated
[   12.303337] wlp3s0: associate with d4:8f:a2:bf:78:bc (try 1/3)
[   12.305472] wlp3s0: RX AssocResp from d4:8f:a2:bf:78:bc (capab=0x1531 status=0 aid=4)
[   12.307229] wlp3s0: associated
[   12.399984] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   43.868676] Bluetooth: RFCOMM TTY layer initialized
[   43.868685] Bluetooth: RFCOMM socket layer initialized
[   43.868693] Bluetooth: RFCOMM ver 1.11
[   47.240811] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
[   48.370708] vfs_monitor: loading out-of-tree module taints kernel.
[   48.370767] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[   48.542855] vfs_monitor: register_kretprobes 10 ok
[   48.542860] vfs_monitor: init ok, kretprobes, genl
[  161.933524] dde-pixmix[3512]: segfault at 300 ip 00007fd962218c70 sp 00007ffe2728df90 error 4 in libQt5XcbQpa.so.5.15.7[7fd962207000+cc000] likely on CPU 0 (core 0, socket 0)
[  161.933541] Code: 48 39 f8 74 13 48 89 43 20 48 85 ff 74 0a 48 8b 07 ff 50 20 48 8b 43 20 48 85 c0 74 6d 48 8b 43 08 48 63 50 08 48 8b 44 d0 10 <48> 8b b8 00 03 00 00 e8 b4 1b 00 00 48 8b 7c 24 08 8b 07 85 c0 74
[  162.255756] dde-pixmix[3521]: segfault at 300 ip 00007f4baa3f1c70 sp 00007ffde2bf09b0 error 4 in libQt5XcbQpa.so.5.15.7[7f4baa3e0000+cc000] likely on CPU 0 (core 0, socket 0)
[  162.255773] Code: 48 39 f8 74 13 48 89 43 20 48 85 ff 74 0a 48 8b 07 ff 50 20 48 8b 43 20 48 85 c0 74 6d 48 8b 43 08 48 63 50 08 48 8b 44 d0 10 <48> 8b b8 00 03 00 00 e8 b4 1b 00 00 48 8b 7c 24 08 8b 07 85 c0 74
[  168.476917] wlp3s0: Connection to AP d4:8f:a2:bf:78:bc lost
[  169.898718] wlp3s0: authenticate with d4:8f:a2:bf:78:bc
[  169.903286] wlp3s0: send auth to d4:8f:a2:bf:78:bc (try 1/3)
[  169.908693] wlp3s0: authenticated
[  169.912005] wlp3s0: associate with d4:8f:a2:bf:78:bc (try 1/3)
[  169.914264] wlp3s0: RX AssocResp from d4:8f:a2:bf:78:bc (capab=0x1531 status=0 aid=3)
[  169.916076] wlp3s0: associated
[  310.329737] wlp3s0: deauthenticating from d4:8f:a2:bf:78:bc by local choice (Reason: 3=DEAUTH_LEAVING)
[  310.697299] PM: suspend entry (deep)
[  310.733339] Filesystems sync: 0.036 seconds
[  310.734363] Freezing user space processes ... (elapsed 0.022 seconds) done.
[  310.757117] OOM killer disabled.
[  310.757121] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  310.758779] printk: Suspending console(s) (use no_console_suspend to debug)
[  310.960911] psmouse serio2: Failed to disable mouse on rmi4-00.fn03/serio0
[  311.392786] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  311.392791] e1000e: EEE TX LPI TIMER: 00000011
[  311.392859] sd 0:0:0:0: [sda] Stopping disk
[  311.596450] ACPI: EC: interrupt blocked
[  311.624743] ACPI: PM: Preparing to enter system sleep state S3
[  311.632371] ACPI: EC: event blocked
[  311.632375] ACPI: EC: EC stopped
[  311.632378] ACPI: PM: Saving platform NVS memory
[  311.632435] Disabling non-boot CPUs ...
[  311.635338] smpboot: CPU 1 is now offline
[  311.637983] smpboot: CPU 2 is now offline
[  311.640371] smpboot: CPU 3 is now offline
[  311.642184] ACPI: PM: Low-level resume complete
[  311.642212] ACPI: EC: EC started
[  311.642213] ACPI: PM: Restoring platform NVS memory
[  311.642587] Enabling non-boot CPUs ...
[  311.642625] x86: Booting SMP configuration:
[  311.642626] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  311.643394] CPU1 is up
[  311.643432] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  311.644042] CPU2 is up
[  311.644079] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  311.644981] CPU3 is up
[  311.646405] ACPI: PM: Waking up from system sleep state S3
[  311.653922] ACPI: EC: interrupt unblocked
[  311.662170] sd 0:0:0:0: [sda] Starting disk
[  311.662498] ACPI: EC: event unblocked
[  311.676861] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[  311.692497] rmi4_smbus 0-002c: failed to get SMBus version number!
[  311.723997] rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
[  311.754557] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[  311.755663] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[  311.762356] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762362] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762365] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762367] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762370] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762373] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.762375] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  311.925578] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[  312.205541] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[  312.393383] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  312.398780] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[  312.418998] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[  312.429113] ata1.00: configured for UDMA/133
[  312.453765] OOM killer enabled.
[  312.453768] Restarting tasks ... 
[  312.453813] usb 2-6: USB disconnect, device number 3
[  312.469916] done.
[  312.469926] random: crng reseeded on system resumption
[  312.566269] PM: suspend exit
[  312.617819] mmc0: card 87a5 removed
[  312.622017] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[  312.703704] e1000e 0000:00:19.0 enp0s25: NIC Link is Down
[  312.786033] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[  312.786041] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[  312.786043] usb 2-6: SerialNumber: b98b4dce74fb
[  312.804437] EXT4-fs (mmcblk0p1): unmounting filesystem.
[  312.853096] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014
[  312.853645] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[  313.001701] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[  313.099447] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[  313.101002] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[  313.120381] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120390] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120393] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120396] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120399] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120401] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.120404] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[  313.244878] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated
[  313.297023] Bluetooth: MGMT ver 1.22
[  313.836156] EXT4-fs (sda4): re-mounted. Quota mode: none.
[  313.910240] EXT4-fs (sda2): re-mounted. Quota mode: none.
[  313.972199] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  313.983959] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  313.998356] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  314.011249] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  314.020502] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  315.532860] mmc0: card never left busy state
[  315.532868] mmc0: error -110 whilst initialising SD card
[  315.981032] mmc0: new high speed SDHC card at address 87a5
[  315.982295] mmcblk0: mmc0:87a5 SE16G 14.6 GiB 
[  315.984277]  mmcblk0: p1
[  316.209374] EXT4-fs (mmcblk0p1): recovery complete
[  316.209382] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
[  316.408756] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[  317.020711] input: TPPS/2 IBM TrackPoint as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-002c/rmi4-00/rmi4-00.fn03/serio2/input/input24
[  317.224729] psmouse serio2: Failed to enable mouse on rmi4-00.fn03/serio0
[  328.754616] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[  328.766162] EXT4-fs (sda4): re-mounted. Quota mode: none.
[  328.805970] EXT4-fs (sda2): re-mounted. Quota mode: none.
[  328.863765] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  328.896423] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  328.937433] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  328.964035] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  328.984422] EXT4-fs (sda5): re-mounted. Quota mode: none.
[  329.008104] EXT4-fs (mmcblk0p1): re-mounted. Quota mode: none.
[  374.965787] usb 2-2: new high-speed USB device number 7 using xhci_hcd
[  375.119925] usb 2-2: New USB device found, idVendor=04a9, idProduct=271b, bcdDevice= 1.00
[  375.119940] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  375.119945] usb 2-2: Product: Canon CAPT USB Device
[  375.119950] usb 2-2: Manufacturer: Canon
[  375.119954] usb 2-2: SerialNumber: 0000A1A9HAl1
[  375.419007] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  375.419061] usbcore: registered new interface driver usblp
[  375.626925] usblp1: removed
[  375.637089] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  380.605999] usblp1: removed
[  380.614225] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  399.219364] usb 2-2: USB disconnect, device number 7
[  399.219749] usblp1: removed
[  399.531512] usb 2-2: new high-speed USB device number 8 using xhci_hcd
[  399.659586] usb 2-2: Device not responding to setup address.
[  399.867517] usb 2-2: Device not responding to setup address.
[  400.075378] usb 2-2: device not accepting address 8, error -71
[  400.411492] usb 2-2: new high-speed USB device number 9 using xhci_hcd
[  400.563782] usb 2-2: New USB device found, idVendor=04a9, idProduct=271b, bcdDevice= 1.00
[  400.563793] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  400.563798] usb 2-2: Product: Canon CAPT USB Device
[  400.563802] usb 2-2: Manufacturer: Canon
[  400.563805] usb 2-2: SerialNumber: 0000A1A9HAl1
[  400.566531] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  400.926300] usblp1: removed
[  400.930550] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  409.845412] usb 2-2: USB disconnect, device number 9
[  409.845558] usblp1: removed
[  410.150592] usb 2-2: new high-speed USB device number 10 using xhci_hcd
[  410.306843] usb 2-2: New USB device found, idVendor=04a9, idProduct=271b, bcdDevice= 1.00
[  410.306863] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  410.306872] usb 2-2: Product: Canon CAPT USB Device
[  410.306880] usb 2-2: Manufacturer: Canon
[  410.306887] usb 2-2: SerialNumber: 0000A1A9HAl1
[  410.311642] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  410.891015] usblp1: removed
[  410.894548] usb 2-2: USB disconnect, device number 10
[  410.894880] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  410.895067] usblp1: removed
[  411.202530] usb 2-2: new high-speed USB device number 11 using xhci_hcd
[  411.358581] usb 2-2: New USB device found, idVendor=04a9, idProduct=271b, bcdDevice= 1.00
[  411.358596] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  411.358602] usb 2-2: Product: Canon CAPT USB Device
[  411.358607] usb 2-2: Manufacturer: Canon
[  411.358611] usb 2-2: SerialNumber: 0000A1A9HAl1
[  411.361989] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  411.912453] usblp1: removed
[  411.925094] usblp 2-2:1.0: usblp1: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04A9 pid 0x271B
[  413.934208] usblp1: removed
[  446.866590] usb 2-2: USB disconnect, device number 11
[  449.903178] usb 2-2: new high-speed USB device number 12 using xhci_hcd
[  450.031142] usb 2-2: device descriptor read/64, error -71
[  450.267093] usb 2-2: device descriptor read/64, error -71
[  450.503057] usb 2-2: new high-speed USB device number 13 using xhci_hcd
[  450.631066] usb 2-2: device descriptor read/64, error -71
[  450.879049] usb 2-2: device descriptor read/64, error -71
[  450.991077] usb usb2-port2: attempt power cycle
[  451.402990] usb 2-2: new high-speed USB device number 14 using xhci_hcd
[  451.403063] usb 2-2: Device not responding to setup address.
[  451.611043] usb 2-2: Device not responding to setup address.
[  451.818970] usb 2-2: device not accepting address 14, error -71
[  451.950938] usb 2-2: new high-speed USB device number 15 using xhci_hcd
[  451.951011] usb 2-2: Device not responding to setup address.
[  452.162988] usb 2-2: Device not responding to setup address.
[  452.374912] usb 2-2: device not accepting address 15, error -71
[  452.374973] usb usb2-port2: unable to enumerate USB device
[  547.953979] wlp3s0: authenticate with a4:39:b3:c7:ea:c6
[  547.958191] wlp3s0: send auth to a4:39:b3:c7:ea:c6 (try 1/3)
[  547.965108] wlp3s0: authenticated
[  547.967937] wlp3s0: associate with a4:39:b3:c7:ea:c6 (try 1/3)
[  547.977748] wlp3s0: RX AssocResp from a4:39:b3:c7:ea:c6 (capab=0x1511 status=0 aid=2)
[  547.987391] wlp3s0: associated
[  548.040045] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
