[    0.000000] Linux version 4.15.0-30deepin-generic (pbuilder@zs-PC) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #31 SMP Fri Nov 30 04:29:02 UTC 2018 (Ubuntu 4.15.0-30deepin.31-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30deepin-generic root=UUID=993c2954-0ee5-4085-ab84-7791ec27a299 ro splash quiet DEEPIN_GFXMODE=1,1024x768,1366x768
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hasee QTH6/HM65, BIOS QS142 04/25/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09D000000 mask FFF000000 uncachable
[    0.000000]   3 base 09E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 240000000 mask FE0000000 write-back
[    0.000000]   8 base 25FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 93000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x160f3f000, 0x160f3ffff] PGTABLE
[    0.000000] BRK [0x160f40000, 0x160f40fff] PGTABLE
[    0.000000] BRK [0x160f41000, 0x160f41fff] PGTABLE
[    0.000000] BRK [0x160f42000, 0x160f42fff] PGTABLE
[    0.000000] BRK [0x160f43000, 0x160f43fff] PGTABLE
[    0.000000] BRK [0x160f44000, 0x160f44fff] PGTABLE
[    0.000000] BRK [0x160f45000, 0x160f45fff] PGTABLE
[    0.000000] BRK [0x160f46000, 0x160f46fff] PGTABLE
[    0.000000] BRK [0x160f47000, 0x160f47fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31709000-0x34b7bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 QUANTA)
[    0.000000] ACPI: XSDT 0x000000009CFFE120 00008C (v01 QUANTA QUANTA   00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFFC000 0000F4 (v04 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFEA000 00E16C (v01 QUANTA QUANTA   00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF6E000 000040
[    0.000000] ACPI: FACS 0x000000009CF6E000 000040
[    0.000000] ACPI: ASF! 0x000000009CFFD000 0000A5 (v32 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFFB000 000038 (v01 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFFA000 00008C (v02 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF9000 00003C (v01 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000009CFE9000 000176 (v01 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFE8000 000224 (v01 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE7000 0001DE (v01 QUANTA QUANTA   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE5000 000028 (v01 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFE2000 000034 (v07 QUANTA QUANTA   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE1000 00090C (v01 QUANTA QUANTA   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE0000 000996 (v01 QUANTA QUANTA   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDB000 004BD1 (v01 QUANTA QUANTA   00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25fdd1000-0x25fdfbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000098fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009ce3efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
[    0.000000] On node 0 totalpages: 2083800
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 152 pages reserved
[    0.000000]   DMA zone: 3992 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9977 pages used for memmap
[    0.000000]   DMA32 zone: 638528 pages, LIFO batch:31
[    0.000000]   Normal zone: 22520 pages used for memmap
[    0.000000]   Normal zone: 1441280 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 104 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x50f with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2051087
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30deepin-generic root=UUID=993c2954-0ee5-4085-ab84-7791ec27a299 ro splash quiet DEEPIN_GFXMODE=1,1024x768,1366x768
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8054172K/8335200K available (12300K kernel code, 2469K rwdata, 4228K rodata, 2408K init, 2416K bss, 281028K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39069 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1995.576 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.15 BogoMIPS (lpj=7982304)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028984] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029617] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029648] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029669] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029915] CPU: Physical Processor ID: 0
[    0.029916] CPU: Processor Core ID: 0
[    0.029922] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029923] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029928] mce: CPU supports 9 MCE banks
[    0.029947] process: using mwait in idle threads
[    0.029950] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.029951] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.029953] Spectre V2 : Mitigation: Full generic retpoline
[    0.029954] Speculative Store Bypass: Vulnerable
[    0.030095] Freeing SMP alternatives memory: 36K
[    0.032086] TSC deadline timer enabled
[    0.032089] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032172] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032196] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.032200] ... version:                3
[    0.032201] ... bit width:              48
[    0.032201] ... generic registers:      4
[    0.032203] ... value mask:             0000ffffffffffff
[    0.032203] ... max period:             00007fffffffffff
[    0.032204] ... fixed-purpose events:   3
[    0.032205] ... event mask:             000000070000000f
[    0.032247] Hierarchical SRCU implementation.
[    0.033524] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.033543] smp: Bringing up secondary CPUs ...
[    0.033635] x86: Booting SMP configuration:
[    0.033636] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.048069] smp: Brought up 1 node, 8 CPUs
[    0.048069] smpboot: Max logical packages: 1
[    0.048069] smpboot: Total of 8 processors activated (31929.21 BogoMIPS)
[    0.052444] devtmpfs: initialized
[    0.052444] x86/mm: Memory block size: 128MB
[    0.052910] evm: security.selinux
[    0.052911] evm: security.SMACK64
[    0.052912] evm: security.SMACK64EXEC
[    0.052912] evm: security.SMACK64TRANSMUTE
[    0.052913] evm: security.SMACK64MMAP
[    0.052914] evm: security.apparmor
[    0.052914] evm: security.ima
[    0.052915] evm: security.capability
[    0.052933] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.052933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.052933] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.052933] pinctrl core: initialized pinctrl subsystem
[    0.052933] RTC time:  2:50:11, date: 09/30/19
[    0.052933] NET: Registered protocol family 16
[    0.052933] audit: initializing netlink subsys (disabled)
[    0.052933] audit: type=2000 audit(1569811811.052:1): state=initialized audit_enabled=0 res=1
[    0.052933] cpuidle: using governor ladder
[    0.052933] cpuidle: using governor menu
[    0.052933] Simple Boot Flag at 0x44 set to 0x1
[    0.052933] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.052933] ACPI: bus type PCI registered
[    0.052933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052933] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.052933] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.052933] PCI: Using configuration type 1 for base access
[    0.052933] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.052933] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.052933] mtrr: probably your BIOS does not setup all CPUs.
[    0.052933] mtrr: corrected configuration.
[    0.056360] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.056362] ACPI: Added _OSI(Module Device)
[    0.056362] ACPI: Added _OSI(Processor Device)
[    0.056362] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.056362] ACPI: Added _OSI(Processor Aggregator Device)
[    0.056362] ACPI: Added _OSI(Linux-Dell-Video)
[    0.056362] ACPI: Executed 1 blocks of module-level executable AML code
[    0.064044] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.064501] ACPI: Dynamic OEM Table Load:
[    0.064510] ACPI: SSDT 0xFFFF9A91D5D17800 000667 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.068486] ACPI: Dynamic OEM Table Load:
[    0.068494] ACPI: SSDT 0xFFFF9A91D5807400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.068870] ACPI: Dynamic OEM Table Load:
[    0.068870] ACPI: SSDT 0xFFFF9A91D5F4E800 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.068870] ACPI: EC: EC started
[    0.068870] ACPI: EC: interrupt blocked
[    0.080220] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.080223] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.080225] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.080226] ACPI: Interpreter enabled
[    0.080255] ACPI: (supports S0 S3 S4 S5)
[    0.080256] ACPI: Using IOAPIC for interrupt routing
[    0.080294] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.080614] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.092346] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.092354] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.092424] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.093284] PCI host bridge to bus 0000:00
[    0.093288] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.093290] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.093291] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.093293] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.093296] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.093306] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.093432] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.093476] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.093591] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.093604] pci 0000:00:02.0: reg 0x10: [mem 0xd2400000-0xd27fffff 64bit]
[    0.093610] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.093615] pci 0000:00:02.0: reg 0x20: [io  0x7000-0x703f]
[    0.093801] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.093829] pci 0000:00:16.0: reg 0x10: [mem 0xda804000-0xda80400f 64bit]
[    0.093913] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.094028] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.094629] pci 0000:00:1a.0: reg 0x10: [mem 0xda809000-0xda8093ff]
[    0.096343] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.096454] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.096480] pci 0000:00:1b.0: reg 0x10: [mem 0xda800000-0xda803fff 64bit]
[    0.096565] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.096679] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.096775] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.096890] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.096983] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.097096] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.097190] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.097303] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.097397] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.097519] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.098115] pci 0000:00:1d.0: reg 0x10: [mem 0xda808000-0xda8083ff]
[    0.099923] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.100035] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.100251] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.100272] pci 0000:00:1f.2: reg 0x10: [io  0x7088-0x708f]
[    0.100281] pci 0000:00:1f.2: reg 0x14: [io  0x7094-0x7097]
[    0.100290] pci 0000:00:1f.2: reg 0x18: [io  0x7080-0x7087]
[    0.100299] pci 0000:00:1f.2: reg 0x1c: [io  0x7090-0x7093]
[    0.100308] pci 0000:00:1f.2: reg 0x20: [io  0x7060-0x707f]
[    0.100317] pci 0000:00:1f.2: reg 0x24: [mem 0xda807000-0xda8077ff]
[    0.100365] pci 0000:00:1f.2: PME# supported from D3hot
[    0.100471] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.100493] pci 0000:00:1f.3: reg 0x10: [mem 0xda805000-0xda8050ff 64bit]
[    0.100516] pci 0000:00:1f.3: reg 0x20: [io  0x7040-0x705f]
[    0.100700] pci 0000:01:00.0: [10de:0dce] type 00 class 0x030000
[    0.100716] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd1ffffff]
[    0.100726] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.100735] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb3ffffff 64bit pref]
[    0.100742] pci 0000:01:00.0: reg 0x24: [io  0x6000-0x607f]
[    0.100749] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.100755] pci 0000:01:00.0: enabling Extended Tags
[    0.112034] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.112042] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.112049] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd20fffff]
[    0.112058] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb3ffffff 64bit pref]
[    0.112204] pci 0000:07:00.0: [8086:08ae] type 00 class 0x028000
[    0.112274] pci 0000:07:00.0: reg 0x10: [mem 0xd9800000-0xd9801fff 64bit]
[    0.112519] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.124056] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.124066] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.124074] pci 0000:00:1c.0:   bridge window [mem 0xd9800000-0xda7fffff]
[    0.124088] pci 0000:00:1c.0:   bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[    0.124201] pci 0000:0d:00.0: [1969:1083] type 00 class 0x020000
[    0.124246] pci 0000:0d:00.0: reg 0x10: [mem 0xd8800000-0xd883ffff 64bit]
[    0.124261] pci 0000:0d:00.0: reg 0x18: [io  0x4000-0x407f]
[    0.124408] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136047] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.136057] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.136066] pci 0000:00:1c.1:   bridge window [mem 0xd8800000-0xd97fffff]
[    0.136079] pci 0000:00:1c.1:   bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
[    0.136216] pci 0000:13:00.0: [1106:3432] type 00 class 0x0c0330
[    0.136251] pci 0000:13:00.0: reg 0x10: [mem 0xd7800000-0xd7800fff]
[    0.136412] pci 0000:13:00.0: supports D1 D2
[    0.136414] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148063] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.148073] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.148082] pci 0000:00:1c.2:   bridge window [mem 0xd7800000-0xd87fffff]
[    0.148095] pci 0000:00:1c.2:   bridge window [mem 0xd4800000-0xd57fffff 64bit pref]
[    0.148183] pci 0000:00:1c.3: PCI bridge to [bus 19-1e]
[    0.148188] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.148192] pci 0000:00:1c.3:   bridge window [mem 0xd6800000-0xd77fffff]
[    0.148199] pci 0000:00:1c.3:   bridge window [mem 0xd5800000-0xd67fffff 64bit pref]
[    0.149055] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149160] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149362] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.149463] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.149565] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149667] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149769] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.150010] ACPI: EC: interrupt unblocked
[    0.150017] ACPI: EC: event unblocked
[    0.150025] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.150027] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.150280] SCSI subsystem initialized
[    0.150298] libata version 3.00 loaded.
[    0.150298] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.150298] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.150298] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.150298] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.150298] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.150298] vgaarb: loaded
[    0.150298] ACPI: bus type USB registered
[    0.150298] usbcore: registered new interface driver usbfs
[    0.150298] usbcore: registered new interface driver hub
[    0.150298] usbcore: registered new device driver usb
[    0.150298] EDAC MC: Ver: 3.0.0
[    0.150298] PCI: Using ACPI for IRQ routing
[    0.158240] PCI: pci_cache_line_size set to 64 bytes
[    0.158345] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[    0.158347] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
[    0.158348] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.158350] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
[    0.158458] NetLabel: Initializing
[    0.158459] NetLabel:  domain hash size = 128
[    0.158460] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.158481] NetLabel:  unlabeled traffic allowed by default
[    0.158498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.158498] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.160023] clocksource: Switched to clocksource hpet
[    0.172749] VFS: Disk quotas dquot_6.6.0
[    0.172773] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.172889] AppArmor: AppArmor Filesystem Enabled
[    0.172925] pnp: PnP ACPI init
[    0.174098] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.174101] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.174103] system 00:00: [io  0x0810-0x0813] has been reserved
[    0.174105] system 00:00: [io  0xffff] has been reserved
[    0.174107] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.174109] system 00:00: [io  0x0454-0x0457] has been reserved
[    0.174112] system 00:00: [io  0x0458-0x047f] could not be reserved
[    0.174114] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.174116] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.174118] system 00:00: [io  0x0380-0x0387] has been reserved
[    0.174120] system 00:00: [io  0x06a0-0x06a7] has been reserved
[    0.174128] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174163] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.174205] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.174366] pnp 00:03: Plug and Play ACPI device, IDs STLc033 PNP0f13 (active)
[    0.174584] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.174587] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.174589] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.174591] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.174593] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.174595] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.174597] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.174600] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.174602] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.174604] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.174610] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175008] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[    0.175010] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[    0.175016] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.175043] pnp: PnP ACPI: found 6 devices
[    0.181650] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.181656] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.181701] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref]
[    0.181704] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.181706] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.181710] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd20fffff]
[    0.181712] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb3ffffff 64bit pref]
[    0.181717] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.181720] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.181725] pci 0000:00:1c.0:   bridge window [mem 0xd9800000-0xda7fffff]
[    0.181730] pci 0000:00:1c.0:   bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[    0.181737] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.181740] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.181746] pci 0000:00:1c.1:   bridge window [mem 0xd8800000-0xd97fffff]
[    0.181750] pci 0000:00:1c.1:   bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
[    0.181757] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.181761] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.181766] pci 0000:00:1c.2:   bridge window [mem 0xd7800000-0xd87fffff]
[    0.181771] pci 0000:00:1c.2:   bridge window [mem 0xd4800000-0xd57fffff 64bit pref]
[    0.181777] pci 0000:00:1c.3: PCI bridge to [bus 19-1e]
[    0.181781] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.181786] pci 0000:00:1c.3:   bridge window [mem 0xd6800000-0xd77fffff]
[    0.181791] pci 0000:00:1c.3:   bridge window [mem 0xd5800000-0xd67fffff 64bit pref]
[    0.181798] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.181800] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.181802] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.181804] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.181806] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.181808] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd20fffff]
[    0.181809] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb3ffffff 64bit pref]
[    0.181811] pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
[    0.181813] pci_bus 0000:07: resource 1 [mem 0xd9800000-0xda7fffff]
[    0.181815] pci_bus 0000:07: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
[    0.181817] pci_bus 0000:0d: resource 0 [io  0x4000-0x4fff]
[    0.181818] pci_bus 0000:0d: resource 1 [mem 0xd8800000-0xd97fffff]
[    0.181820] pci_bus 0000:0d: resource 2 [mem 0xd3800000-0xd47fffff 64bit pref]
[    0.181822] pci_bus 0000:13: resource 0 [io  0x3000-0x3fff]
[    0.181824] pci_bus 0000:13: resource 1 [mem 0xd7800000-0xd87fffff]
[    0.181825] pci_bus 0000:13: resource 2 [mem 0xd4800000-0xd57fffff 64bit pref]
[    0.181827] pci_bus 0000:19: resource 0 [io  0x2000-0x2fff]
[    0.181829] pci_bus 0000:19: resource 1 [mem 0xd6800000-0xd77fffff]
[    0.181831] pci_bus 0000:19: resource 2 [mem 0xd5800000-0xd67fffff 64bit pref]
[    0.181975] NET: Registered protocol family 2
[    0.182194] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.182349] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.182480] TCP: Hash tables configured (established 65536 bind 65536)
[    0.182522] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.182553] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.182619] NET: Registered protocol family 1
[    0.182634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.220236] pci 0000:0d:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    5.250375] PCI: CLS 64 bytes, default 64
[    5.250428] Unpacking initramfs...
[    6.247767] Freeing initrd memory: 53708K
[    6.247793] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    6.247797] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    6.248092] Scanning for low memory corruption every 60 seconds
[    6.248945] Initialise system trusted keyrings
[    6.248956] Key type blacklist registered
[    6.248996] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    6.250359] zbud: loaded
[    6.250944] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.251104] fuse init (API version 7.26)
[    6.252806] Key type asymmetric registered
[    6.252807] Asymmetric key parser 'x509' registered
[    6.252842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    6.252884] io scheduler noop registered
[    6.252885] io scheduler deadline registered
[    6.252935] io scheduler cfq registered (default)
[    6.253885] intel_idle: MWAIT substates: 0x21120
[    6.253886] intel_idle: v0.4.1 model 0x2A
[    6.254230] intel_idle: lapic_timer_reliable_states 0xffffffff
[    6.254904] ACPI: AC Adapter [ACAD] (on-line)
[    6.254976] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    6.254986] ACPI: Power Button [PWRB]
[    6.255024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    6.255033] ACPI: Sleep Button [SLPB]
[    6.255074] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    6.255081] ACPI: Lid Switch [LID0]
[    6.255130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.255161] ACPI: Power Button [PWRF]
[    6.259949] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.261362] thermal LNXTHERM:00: registered as thermal_zone0
[    6.261364] ACPI: Thermal Zone [TZ01] (62 C)
[    6.261556] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    6.262459] ACPI: Battery Slot [BAT0] (battery absent)
[    6.264367] Linux agpgart interface v0.103
[    6.266742] loop: module loaded
[    6.266931] libphy: Fixed MDIO Bus: probed
[    6.266932] tun: Universal TUN/TAP device driver, 1.6
[    6.266970] PPP generic driver version 2.4.2
[    6.267013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.267018] ehci-pci: EHCI PCI platform driver
[    6.267159] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    6.267172] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    6.267186] ehci-pci 0000:00:1a.0: debug port 2
[    6.271097] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    6.271114] ehci-pci 0000:00:1a.0: irq 16, io mem 0xda809000
[    6.284139] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    6.284229] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.284232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.284234] usb usb1: Product: EHCI Host Controller
[    6.284236] usb usb1: Manufacturer: Linux 4.15.0-30deepin-generic ehci_hcd
[    6.284237] usb usb1: SerialNumber: 0000:00:1a.0
[    6.284537] hub 1-0:1.0: USB hub found
[    6.284546] hub 1-0:1.0: 2 ports detected
[    6.284870] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    6.284879] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    6.284894] ehci-pci 0000:00:1d.0: debug port 2
[    6.288798] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    6.288815] ehci-pci 0000:00:1d.0: irq 23, io mem 0xda808000
[    6.304139] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    6.304243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    6.304245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.304247] usb usb2: Product: EHCI Host Controller
[    6.304249] usb usb2: Manufacturer: Linux 4.15.0-30deepin-generic ehci_hcd
[    6.304251] usb usb2: SerialNumber: 0000:00:1d.0
[    6.304508] hub 2-0:1.0: USB hub found
[    6.304520] hub 2-0:1.0: 2 ports detected
[    6.304671] ehci-platform: EHCI generic platform driver
[    6.304691] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.304695] ohci-pci: OHCI PCI platform driver
[    6.304706] ohci-platform: OHCI generic platform driver
[    6.304714] uhci_hcd: USB Universal Host Controller Interface driver
[    6.304900] xhci_hcd 0000:13:00.0: xHCI Host Controller
[    6.304906] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 3
[    6.305086] xhci_hcd 0000:13:00.0: hcc params 0x0028f0eb hci version 0x96 quirks 0x00080080
[    6.305305] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    6.305307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.305309] usb usb3: Product: xHCI Host Controller
[    6.305311] usb usb3: Manufacturer: Linux 4.15.0-30deepin-generic xhci-hcd
[    6.305312] usb usb3: SerialNumber: 0000:13:00.0
[    6.305508] hub 3-0:1.0: USB hub found
[    6.305519] hub 3-0:1.0: 1 port detected
[    6.305606] xhci_hcd 0000:13:00.0: xHCI Host Controller
[    6.305610] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 4
[    6.305630] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.305651] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    6.305653] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.305655] usb usb4: Product: xHCI Host Controller
[    6.305657] usb usb4: Manufacturer: Linux 4.15.0-30deepin-generic xhci-hcd
[    6.305659] usb usb4: SerialNumber: 0000:13:00.0
[    6.305853] hub 4-0:1.0: USB hub found
[    6.305868] hub 4-0:1.0: 4 ports detected
[    6.306057] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2A] at 0x60,0x64 irq 1,12
[    6.309376] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.309381] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.309670] mousedev: PS/2 mouse device common for all mice
[    6.310193] rtc_cmos 00:01: RTC can wake from S4
[    6.310209] rtc_cmos: probe of 00:01 failed with error -16
[    6.310229] i2c /dev entries driver
[    6.310286] device-mapper: uevent: version 1.0.3
[    6.310361] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    6.310367] intel_pstate: Intel P-state driver initializing
[    6.310788] ledtrig-cpu: registered to indicate activity on CPUs
[    6.311304] NET: Registered protocol family 10
[    6.315474] Segment Routing with IPv6
[    6.315492] NET: Registered protocol family 17
[    6.315549] Key type dns_resolver registered
[    6.316074] RAS: Correctable Errors collector initialized.
[    6.316101] microcode: sig=0x206a7, pf=0x10, revision=0x14
[    6.316226] microcode: Microcode Update Driver: v2.2.
[    6.316242] sched_clock: Marking stable (6316220005, 0)->(6307160951, 9059054)
[    6.316618] registered taskstats version 1
[    6.316626] Loading compiled-in X.509 certificates
[    6.318808] Loaded X.509 cert 'Build time autogenerated kernel key: b94d8917fad4156ea6dc7057a7ef7d372dca8ea1'
[    6.318827] zswap: loaded using pool lzo/zbud
[    6.321351] Key type big_key registered
[    6.321355] Key type trusted registered
[    6.322552] Key type encrypted registered
[    6.322554] AppArmor: AppArmor sha1 policy hashing enabled
[    6.322556] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    6.322576] evm: HMAC attrs: 0x1
[    6.322979]   Magic number: 3:271:815
[    6.323048] hctosys: unable to open rtc device (rtc0)
[    6.323097] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.323098] EDD information not available.
[    6.326341] Freeing unused kernel memory: 2408K
[    6.364080] Write protecting the kernel read-only data: 20480k
[    6.364758] Freeing unused kernel memory: 2008K
[    6.369093] Freeing unused kernel memory: 1916K
[    6.376674] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.376675] x86/mm: Checking user space page tables
[    6.383189] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    6.384017] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.397147] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.397220] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.397230] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.397240] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.397970] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.398001] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.399378] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.399435] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.399448] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.399893] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.430404] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    6.430492] acpi PNP0C14:02: duplicate WMI GUID F6CB5C3C-9CAE-4EBD-B577-931EA32A2CC0 (first instance was on PNP0C14:01)
[    6.430505] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    6.430805] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    6.443045] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    6.446052] ahci 0000:00:1f.2: version 3.0
[    6.446294] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    6.446298] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    6.453431] scsi host0: ahci
[    6.456744] scsi host1: ahci
[    6.462499] scsi host2: ahci
[    6.464319] scsi host3: ahci
[    6.465400] scsi host4: ahci
[    6.476067] scsi host5: ahci
[    6.476130] ata1: SATA max UDMA/133 abar m2048@0xda807000 port 0xda807100 irq 25
[    6.476131] ata2: DUMMY
[    6.476132] ata3: DUMMY
[    6.476133] ata4: DUMMY
[    6.476134] ata5: DUMMY
[    6.476135] ata6: DUMMY
[    6.481439] atl1c 0000:0d:00.0: version 1.0.1.1-NAPI
[    6.486808] atl1c 0000:0d:00.0 enp13s0: renamed from eth0
[    6.525526] [drm] Memory usable by graphics device = 2048M
[    6.525527] [drm] Replacing VGA console driver
[    6.526008] Console: switching to colour dummy device 80x25
[    6.529471] MXM: GUID detected in BIOS
[    6.529530] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    6.529565] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
[    6.529665] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    6.530779] pci 0000:01:00.0: optimus capabilities: disabled, status dynamic power, 
[    6.530783] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.VGA_ handle
[    6.530802] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    6.530926] nouveau 0000:01:00.0: NVIDIA GF106 (0c3700a1)
[    6.532054] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.532055] [drm] Driver supports precise vblank timestamp query.
[    6.534818] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.578447] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    6.578587] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    6.620012] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    6.640024] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    6.640035] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    6.776380] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    6.776382] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.776670] hub 1-1:1.0: USB hub found
[    6.776755] hub 1-1:1.0: 6 ports detected
[    6.790417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    6.791604] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[    6.791606] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    6.792890] ata1.00: configured for UDMA/133
[    6.793120] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[    6.793467] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.793626] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.793628] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    6.793690] sd 0:0:0:0: [sda] Write Protect is off
[    6.793692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.793782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.858157] acpi device:34: registered as cooling_device8
[    6.858261] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:01/input/input7
[    6.858505] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    6.858508] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.858645] hub 2-1:1.0: USB hub found
[    6.858751] hub 2-1:1.0: 6 ports detected
[    6.858856] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.858962] usb 3-1: New USB device found, idVendor=2109, idProduct=0811
[    6.858964] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.858966] usb 3-1: Product: USB2.0 Hub
[    6.859558] hub 3-1:1.0: USB hub found
[    6.859711] hub 3-1:1.0: 4 ports detected
[    6.860551] acpi device:3b: registered as cooling_device9
[    6.860637] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8
[    6.870524]  sda: sda1 sda2
[    6.871276] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.873147] fbcon: inteldrmfb (fb0) is primary device
[    6.892336] nouveau 0000:01:00.0: bios: version 70.06.29.00.0b
[    7.021981] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    7.077202] vga_switcheroo: enabled
[    7.077340] [TTM] Zone  kernel: Available graphics memory: 4057124 kiB
[    7.077341] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    7.077342] [TTM] Initializing pool allocator
[    7.077345] [TTM] Initializing DMA pool allocator
[    7.077363] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    7.077364] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    7.077367] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    7.077368] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    7.077370] nouveau 0000:01:00.0: DRM: DCB outp 00: 02014300 00000000
[    7.077372] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[    7.077373] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[    7.077374] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[    7.077375] nouveau 0000:01:00.0: DRM: DCB conn 03: 00202346
[    7.077376] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[    7.077377] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[    7.077378] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[    7.077379] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[    7.078291] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.078291] [drm] Driver supports precise vblank timestamp query.
[    7.079242] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    7.129564] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo         (ptrval)
[    7.143984] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    7.147973] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    7.243546] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sn: 0, sw: 1.1.0-K
[    7.260013] tsc: Refined TSC clocksource calibration: 1995.467 MHz
[    7.260021] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e85801c, max_idle_ns: 881590625023 ns
[    7.262901] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c31c
[    7.262903] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.262904] usb 2-1.2: Product: USB Keyboard
[    7.262906] usb 2-1.2: Manufacturer: Logitech
[    7.264508] random: fast init done
[    7.271111] hidraw: raw HID events driver (C) Jiri Kosina
[    7.280647] usbcore: registered new interface driver usbhid
[    7.280648] usbhid: USB HID core driver
[    7.282427] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C31C.0001/input/input9
[    7.340346] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[    7.340499] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C31C.0002/input/input10
[    7.353176] usb 1-1.2: New USB device found, idVendor=064e, idProduct=e25c
[    7.353182] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    7.353186] usb 1-1.2: Product: USB Webcam
[    7.353190] usb 1-1.2: Manufacturer: SuYin
[    7.353194] usb 1-1.2: SerialNumber: CN1316-T803-HN01S-VL-R01.02.02
[    7.400406] hid-generic 0003:046D:C31C.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input1
[    7.435988] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    7.557410] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    7.557412] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.557413] usb 1-1.5: Product: USB2.0-CRW
[    7.557415] usb 1-1.5: Manufacturer: Generic
[    7.557416] usb 1-1.5: SerialNumber: 20090516388200000
[    7.566773] usbcore: registered new interface driver usb-storage
[    7.568174] usbcore: registered new interface driver uas
[    7.569442] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[    7.588239] scsi host6: usb-storage 1-1.5:1.0
[    7.588313] usbcore: registered new interface driver ums-realtek
[    7.661712] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input6
[    7.670248] Console: switching to colour frame buffer device 170x48
[    7.689070] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.689214] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    7.704008] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    7.808504] usb 1-1.5: USB disconnect, device number 4
[    8.211961] raid6: sse2x1   gen()  6849 MB/s
[    8.259958] raid6: sse2x1   xor()  5613 MB/s
[    8.307965] raid6: sse2x2   gen()  7234 MB/s
[    8.355953] raid6: sse2x2   xor()  3670 MB/s
[    8.403962] raid6: sse2x4   gen()  6148 MB/s
[    8.451958] raid6: sse2x4   xor()  4252 MB/s
[    8.451959] raid6: using algorithm sse2x2 gen() 7234 MB/s
[    8.451960] raid6: .... xor() 3670 MB/s, rmw enabled
[    8.451961] raid6: using ssse3x2 recovery algorithm
[    8.451974] clocksource: Switched to clocksource tsc
[    8.453201] xor: automatically using best checksumming function   avx       
[    8.454391] async_tx: api initialized (async)
[    8.985063] Btrfs loaded, crc32c=crc32c-intel
[   14.297899] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.189320] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.262829] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   15.280147] systemd[1]: Detected architecture x86-64.
[   15.294764] systemd[1]: Set hostname to <wsw-PC>.
[   15.666316] random: crng init done
[   15.961728] systemd[1]: Reached target Remote File Systems.
[   15.961912] systemd[1]: Created slice System Slice.
[   15.962408] systemd[1]: Mounting Huge Pages File System...
[   15.962479] systemd[1]: Listening on Journal Socket (/dev/log).
[   15.962534] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   15.962558] systemd[1]: Reached target User and Group Name Lookups.
[   15.962747] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   16.165620] vfs_monitor: loading out-of-tree module taints kernel.
[   16.165657] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[   16.166093] mp: /, major: 8, minor: 1
[   16.166094] partition count: 1, comm[357]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[   16.268910] register_kretprobes 10 ok
[   16.508700] lp: driver loaded but no devices found
[   16.512364] ppdev: user-space parallel port driver
[   16.809991] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[   17.066204] Adding 4194300k swap on /swapfile.  Priority:-2 extents:9 across:4505596k FS
[   17.353954] systemd-journald[363]: Received request to flush runtime journal from PID 1
[   17.953317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   17.953325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.953328] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   17.953333] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20170831/utaddress-247)
[   17.953343] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   17.953351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.953352] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   17.953362] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20170831/utaddress-247)
[   17.953369] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   17.953376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.953378] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   17.953385] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.GPIO) (20170831/utaddress-247)
[   17.953392] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   17.953400] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.953401] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.953405] lpc_ich 0000:00:1f.0: No MFD cells added
[   17.954197] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.022752] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   18.022754] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   18.022756] RAPL PMU: hw unit of domain package 2^-16 Joules
[   18.022757] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   18.176081] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   18.183340] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   18.185425] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   18.283642] Error: Driver 'pcspkr' is already registered, aborting...
[   18.436606] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   18.436614] cfg80211: failed to load regulatory.db
[   18.515540] Intel(R) Wireless WiFi driver for Linux
[   18.515541] Copyright(c) 2003- 2015 Intel Corporation
[   18.515692] iwlwifi 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[   18.521511] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   18.655841] iwlwifi 0000:07:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
[   18.778873] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.778875] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.778877] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   18.778879] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.778880] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.778882] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.778883] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   18.833483] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   18.833485] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   18.833486] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   18.833488] iwlwifi 0000:07:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
[   18.888065] wl: module license 'MIXED/Proprietary' taints kernel.
[   18.888066] Disabling lock debugging due to kernel taint
[   18.896652] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   18.933350] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.933408] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.933456] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   19.252547] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[   20.713150] intel_rapl: Found RAPL domain package
[   20.713152] intel_rapl: Found RAPL domain core
[   20.713153] intel_rapl: Found RAPL domain uncore
[   23.116890] media: Linux media interface: v0.10
[   23.130861] Linux video capture interface: v2.00
[   23.821893] uvcvideo: Found UVC 1.00 device USB Webcam (064e:e25c)
[   23.828043] uvcvideo 1-1.2:1.0: Entity type for entity Extension 7 was not initialized!
[   23.828045] uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
[   23.828047] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[   23.828048] uvcvideo 1-1.2:1.0: Entity type for entity Extension 4 was not initialized!
[   23.828112] input: USB Webcam: USB Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input15
[   23.828189] usbcore: registered new interface driver uvcvideo
[   23.828190] USB Video Class driver (1.1.1)
[   26.312693] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[   26.333074] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[   26.337088] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   26.350712] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[   26.413622] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[   26.453492] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   26.508974] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   26.939759] wlp7s0: authenticate with e0:c6:3c:e5:13:a9
[   26.945100] wlp7s0: send auth to e0:c6:3c:e5:13:a9 (try 1/3)
[   26.948140] wlp7s0: authenticated
[   26.948311] wlp7s0: waiting for beacon from e0:c6:3c:e5:13:a9
[   27.044065] wlp7s0: associate with e0:c6:3c:e5:13:a9 (try 1/3)
[   27.047444] wlp7s0: RX AssocResp from e0:c6:3c:e5:13:a9 (capab=0x411 status=0 aid=2)
[   27.051449] wlp7s0: associated
[   27.183633] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[   32.703909] NET: Registered protocol family 15
[   33.600816] Initializing XFRM netlink socket
[   58.707984] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   58.708034] partition /media/wsw/5aa62d14-c650-2e4c-9147-2a13813cc3fa [8, 2] added, comm[4483]: mount
[ 5347.469397] deepin-movie[9910]: segfault at 0 ip 00007f5d357d3760 sp 00007ffd456b5a18 error 4 in libQt5Core.so.5.7.1[7f5d356e1000+4be000]
[ 5350.073259] dde_file_manage[9874]: segfault at 8 ip 00007fb6318072a1 sp 00007fb60b3fe1b0 error 4 in libQt5Core.so.5.7.1[7fb63159f000+4be000]
[ 7183.195181] wlp7s0: deauthenticating from e0:c6:3c:e5:13:a9 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7187.148254] PM: suspend entry (deep)
[ 7187.148256] PM: Syncing filesystems ... done.
[ 7187.440469] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7187.442448] OOM killer disabled.
[ 7187.442449] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7187.443751] Suspending console(s) (use no_console_suspend to debug)
[ 7187.461406] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7187.542803] sd 0:0:0:0: [sda] Stopping disk
[ 7188.942061] ACPI: EC: interrupt blocked
[ 7188.961862] ACPI: Preparing to enter system sleep state S3
[ 7188.965346] ACPI: EC: event blocked
[ 7188.965346] ACPI: EC: EC stopped
[ 7188.965347] PM: Saving platform NVS memory
[ 7188.965901] Disabling non-boot CPUs ...
[ 7188.982725] smpboot: CPU 1 is now offline
[ 7189.002716] smpboot: CPU 2 is now offline
[ 7189.026677] smpboot: CPU 3 is now offline
[ 7189.050675] smpboot: CPU 4 is now offline
[ 7189.074636] smpboot: CPU 5 is now offline
[ 7189.098637] smpboot: CPU 6 is now offline
[ 7189.122595] smpboot: CPU 7 is now offline
[ 7189.124140] ACPI: Low-level resume complete
[ 7189.124199] ACPI: EC: EC started
[ 7189.124200] PM: Restoring platform NVS memory
[ 7189.124719] Enabling non-boot CPUs ...
[ 7189.124770] x86: Booting SMP configuration:
[ 7189.124771] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7189.127422]  cache: parent cpu1 should not be sleeping
[ 7189.127629] CPU1 is up
[ 7189.127669] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7189.130233]  cache: parent cpu2 should not be sleeping
[ 7189.130461] CPU2 is up
[ 7189.130490] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7189.133003]  cache: parent cpu3 should not be sleeping
[ 7189.133238] CPU3 is up
[ 7189.133268] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 7189.135830]  cache: parent cpu4 should not be sleeping
[ 7189.136092] CPU4 is up
[ 7189.136120] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 7189.138636]  cache: parent cpu5 should not be sleeping
[ 7189.138899] CPU5 is up
[ 7189.138929] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 7189.141565]  cache: parent cpu6 should not be sleeping
[ 7189.141910] CPU6 is up
[ 7189.141938] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 7189.322337]  cache: parent cpu7 should not be sleeping
[ 7189.322629] CPU7 is up
[ 7189.330085] ACPI: Waking up from system sleep state S3
[ 7189.334988] ACPI: EC: interrupt unblocked
[ 7189.359889] usb usb3: root hub lost power or was reset
[ 7189.359891] usb usb4: root hub lost power or was reset
[ 7189.360158] ACPI: button: The lid device is not compliant to SW_LID.
[ 7189.360598] sd 0:0:0:0: [sda] Starting disk
[ 7189.361252] ACPI: EC: event unblocked
[ 7189.607099] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 7189.715302] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[ 7189.803120] usb 2-1.2: reset low-speed USB device number 3 using ehci-pci
[ 7190.110513] OOM killer enabled.
[ 7190.110514] Restarting tasks ... done.
[ 7190.116093] video LNXVIDEO:01: Restoring backlight state
[ 7190.199051] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[ 7190.259087] video LNXVIDEO:02: Restoring backlight state
[ 7190.259387] PM: suspend exit
[ 7190.328358] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0138
[ 7190.328361] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7190.328362] usb 1-1.5: Product: USB2.0-CRW
[ 7190.328364] usb 1-1.5: Manufacturer: Generic
[ 7190.328365] usb 1-1.5: SerialNumber: 20090516388200000
[ 7190.334328] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[ 7190.354109] scsi host6: usb-storage 1-1.5:1.0
[ 7190.354527] usb 1-1.5: USB disconnect, device number 5
[ 7192.255155] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7192.258167] ata1.00: configured for UDMA/133
[ 7192.728063] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[ 7192.747938] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[ 7192.749182] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 7192.762552] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[ 7192.824623] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[ 7192.859963] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 7192.940170] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 7193.327363] wlp7s0: authenticate with e0:c6:3c:e5:13:a9
[ 7193.330740] wlp7s0: send auth to e0:c6:3c:e5:13:a9 (try 1/3)
[ 7193.333563] wlp7s0: authenticated
[ 7193.339040] wlp7s0: associate with e0:c6:3c:e5:13:a9 (try 1/3)
[ 7193.343147] wlp7s0: RX AssocResp from e0:c6:3c:e5:13:a9 (capab=0x411 status=0 aid=2)
[ 7193.356729] wlp7s0: associated
[ 7193.367880] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[10602.027453] wlp7s0: deauthenticating from e0:c6:3c:e5:13:a9 by local choice (Reason: 3=DEAUTH_LEAVING)
[10605.954987] PM: suspend entry (deep)
[10605.954989] PM: Syncing filesystems ... done.
[10606.148165] Freezing user space processes ... (elapsed 0.001 seconds) done.
[10606.149972] OOM killer disabled.
[10606.149972] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10606.151404] Suspending console(s) (use no_console_suspend to debug)
[10606.169904] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10606.234467] sd 0:0:0:0: [sda] Stopping disk
[10607.666386] ACPI: EC: interrupt blocked
[10607.686287] ACPI: Preparing to enter system sleep state S3
[10607.689780] ACPI: EC: event blocked
[10607.689781] ACPI: EC: EC stopped
[10607.689781] PM: Saving platform NVS memory
[10607.690324] Disabling non-boot CPUs ...
[10607.707663] smpboot: CPU 1 is now offline
[10607.727347] smpboot: CPU 2 is now offline
[10607.751289] smpboot: CPU 3 is now offline
[10607.783321] smpboot: CPU 4 is now offline
[10607.807258] smpboot: CPU 5 is now offline
[10607.831289] smpboot: CPU 6 is now offline
[10607.855210] smpboot: CPU 7 is now offline
[10607.856797] ACPI: Low-level resume complete
[10607.856856] ACPI: EC: EC started
[10607.856857] PM: Restoring platform NVS memory
[10607.857378] Enabling non-boot CPUs ...
[10607.857439] x86: Booting SMP configuration:
[10607.857440] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10607.860049]  cache: parent cpu1 should not be sleeping
[10607.860253] CPU1 is up
[10607.860292] smpboot: Booting Node 0 Processor 2 APIC 0x2
[10607.862832]  cache: parent cpu2 should not be sleeping
[10607.863061] CPU2 is up
[10607.863094] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10607.865606]  cache: parent cpu3 should not be sleeping
[10607.865843] CPU3 is up
[10607.865872] smpboot: Booting Node 0 Processor 4 APIC 0x4
[10607.868439]  cache: parent cpu4 should not be sleeping
[10607.868706] CPU4 is up
[10607.868735] smpboot: Booting Node 0 Processor 5 APIC 0x5
[10607.871247]  cache: parent cpu5 should not be sleeping
[10607.871526] CPU5 is up
[10607.871555] smpboot: Booting Node 0 Processor 6 APIC 0x6
[10607.874195]  cache: parent cpu6 should not be sleeping
[10607.874537] CPU6 is up
[10607.874566] smpboot: Booting Node 0 Processor 7 APIC 0x7
[10608.055124]  cache: parent cpu7 should not be sleeping
[10608.055440] CPU7 is up
[10608.062920] ACPI: Waking up from system sleep state S3
[10608.068412] ACPI: EC: interrupt unblocked
[10608.090764] sd 0:0:0:0: [sda] Starting disk
[10608.091737] usb usb3: root hub lost power or was reset
[10608.091739] usb usb4: root hub lost power or was reset
[10608.092895] ACPI: EC: event unblocked
[10608.335441] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[10608.443669] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[10608.535752] usb 2-1.2: reset low-speed USB device number 3 using ehci-pci
[10608.843178] OOM killer enabled.
[10608.843179] Restarting tasks ... done.
[10608.848468] video LNXVIDEO:01: Restoring backlight state
[10608.923398] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[10608.997483] video LNXVIDEO:02: Restoring backlight state
[10608.997792] PM: suspend exit
[10609.004471] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[10609.024407] IPv6: ADDRCONF(NETDEV_UP): enp13s0: link is not ready
[10609.025701] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[10609.038952] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[10609.102231] iwlwifi 0000:07:00.0: Radio type=0x0-0x0-0x3
[10609.137645] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[10609.196497] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[10609.284145] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0138
[10609.284153] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10609.284158] usb 1-1.5: Product: USB2.0-CRW
[10609.284162] usb 1-1.5: Manufacturer: Generic
[10609.284166] usb 1-1.5: SerialNumber: 20090516388200000
[10609.289981] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[10609.308900] scsi host6: usb-storage 1-1.5:1.0
[10609.309327] usb 1-1.5: USB disconnect, device number 6
[10609.636448] wlp7s0: authenticate with e0:c6:3c:e5:13:a9
[10609.640010] wlp7s0: send auth to e0:c6:3c:e5:13:a9 (try 1/3)
[10609.642726] wlp7s0: authenticated
[10609.642867] wlp7s0: waiting for beacon from e0:c6:3c:e5:13:a9
[10609.659395] wlp7s0: associate with e0:c6:3c:e5:13:a9 (try 1/3)
[10609.664043] wlp7s0: RX AssocResp from e0:c6:3c:e5:13:a9 (capab=0x411 status=0 aid=2)
[10609.666150] wlp7s0: associated
[10609.678799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[10610.927406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10610.930123] ata1.00: configured for UDMA/133
[12611.237501] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sn: 0, sw: 1.1.0-K
[12611.675816] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input17
[13421.528048] Bluetooth: Core ver 2.22
[13421.528067] NET: Registered protocol family 31
[13421.528068] Bluetooth: HCI device and connection manager initialized
[13421.528071] Bluetooth: HCI socket layer initialized
[13421.528073] Bluetooth: L2CAP socket layer initialized
[13421.528079] Bluetooth: SCO socket layer initialized
