[    0.000000] microcode: microcode updated early to revision 0x1f, date = 2018-02-07
[    0.000000] Linux version 4.15.0-29deepin-generic (pbuilder@zs-PC) (gcc version 7.3.0 (Debian 7.3.0-19)) #31 SMP Fri Jul 27 07:12:08 UTC 2018 (Ubuntu 4.15.0-29deepin.31-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=23558d6e-aa28-4663-bf46-89b135eb663a ro splash quiet DEEPIN_GFXMODE=0,1366x768,1024x768
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b4e09fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b4e0a000-0x00000000b500bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b500c000-0x00000000c41fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c41ff000-0x00000000c6eeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c6eef000-0x00000000c6f9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c6f9f000-0x00000000c6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c6fff000-0x00000000c6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000022f600000-0x000000022fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire V5-471G/Aspire V5-471G, BIOS V1.20 12/12/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0C8000000 mask FF8000000 uncachable
[    0.000000]   6 base 0C7000000 mask FFF000000 uncachable
[    0.000000]   7 base 100000000 mask F00000000 write-back
[    0.000000]   8 base 200000000 mask FE0000000 write-back
[    0.000000]   9 base 220000000 mask FF0000000 write-back
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xc7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x19e13f000, 0x19e13ffff] PGTABLE
[    0.000000] BRK [0x19e140000, 0x19e140fff] PGTABLE
[    0.000000] BRK [0x19e141000, 0x19e141fff] PGTABLE
[    0.000000] BRK [0x19e142000, 0x19e142fff] PGTABLE
[    0.000000] BRK [0x19e143000, 0x19e143fff] PGTABLE
[    0.000000] BRK [0x19e144000, 0x19e144fff] PGTABLE
[    0.000000] BRK [0x19e145000, 0x19e145fff] PGTABLE
[    0.000000] BRK [0x19e146000, 0x19e146fff] PGTABLE
[    0.000000] BRK [0x19e147000, 0x19e147fff] PGTABLE
[    0.000000] BRK [0x19e148000, 0x19e148fff] PGTABLE
[    0.000000] BRK [0x19e149000, 0x19e149fff] PGTABLE
[    0.000000] BRK [0x19e14a000, 0x19e14afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3277d000-0x353b5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000C6FFE170 0000A4 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: FACP 0x00000000C6FED000 0000F4 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: DSDT 0x00000000C6FF0000 00BFD8 (v02 ACRSYS IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000C6F7C000 000040
[    0.000000] ACPI: FACS 0x00000000C6F7C000 000040
[    0.000000] ACPI: SLIC 0x00000000C6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FFC000 0001F9 (v01 ACRSYS PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000C6FEF000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: HPET 0x00000000C6FEC000 000038 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: APIC 0x00000000C6FEB000 000098 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: MCFG 0x00000000C6FEA000 00003C (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: FPDT 0x00000000C6FE9000 000054 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FE8000 0008E4 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000C6FE7000 000A92 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000C6FE6000 00003E (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: UEFI 0x00000000C6FE5000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000C6FE4000 000055 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: DMAR 0x00000000C6FE3000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FE2000 000C64 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000C6FE1000 000256 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22f5d0000-0x22f5fafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000b4e09fff]
[    0.000000]   node   0: [mem 0x00000000b500c000-0x00000000c41fefff]
[    0.000000]   node   0: [mem 0x00000000c6fff000-0x00000000c6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f5fffff]
[    0.000000] On node 0 totalpages: 2044825
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12472 pages used for memmap
[    0.000000]   DMA32 zone: 798205 pages, LIFO batch:31
[    0.000000]   Normal zone: 19416 pages used for memmap
[    0.000000]   Normal zone: 1242624 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000c7a00000-0x00000000cf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb4e0a000-0xb500bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc41ff000-0xc6eeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xc6eef000-0xc6f9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xc6f9f000-0xc6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2012852
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=23558d6e-aa28-4663-bf46-89b135eb663a ro splash quiet DEEPIN_GFXMODE=0,1366x768,1024x768
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7909284K/8179300K available (12300K kernel code, 2470K rwdata, 4228K rodata, 2408K init, 2416K bss, 270016K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39092 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR: RMRR base: 0x000000c6289000 end: 0x000000c629ffff
[    0.000000] DMAR: RMRR base: 0x000000c7800000 end: 0x000000cf9fffff
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1795.810 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.62 BogoMIPS (lpj=7183240)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Vulnerable
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.028877] TSC deadline timer enabled
[    0.028881] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.028978] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.029009] ... version:                3
[    0.029010] ... bit width:              48
[    0.029011] ... generic registers:      4
[    0.029012] ... value mask:             0000ffffffffffff
[    0.029013] ... max period:             00007fffffffffff
[    0.029014] ... fixed-purpose events:   3
[    0.029015] ... event mask:             000000070000000f
[    0.029062] Hierarchical SRCU implementation.
[    0.030568] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.030591] smp: Bringing up secondary CPUs ...
[    0.030702] x86: Booting SMP configuration:
[    0.030703] .... node  #0, CPUs:      #1 #2 #3
[    0.038088] smp: Brought up 1 node, 4 CPUs
[    0.038088] smpboot: Max logical packages: 2
[    0.038088] smpboot: Total of 4 processors activated (14366.48 BogoMIPS)
[    0.040379] devtmpfs: initialized
[    0.040379] x86/mm: Memory block size: 128MB
[    0.041023] evm: security.selinux
[    0.041024] evm: security.SMACK64
[    0.041025] evm: security.SMACK64EXEC
[    0.041025] evm: security.SMACK64TRANSMUTE
[    0.041026] evm: security.SMACK64MMAP
[    0.041027] evm: security.apparmor
[    0.041028] evm: security.ima
[    0.041028] evm: security.capability
[    0.041049] PM: Registering ACPI NVS region [mem 0xc6eef000-0xc6f9efff] (720896 bytes)
[    0.041049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.041049] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.041049] pinctrl core: initialized pinctrl subsystem
[    0.041049] RTC time:  8:16:28, date: 07/04/19
[    0.041049] NET: Registered protocol family 16
[    0.041049] audit: initializing netlink subsys (disabled)
[    0.041049] audit: type=2000 audit(1562228188.040:1): state=initialized audit_enabled=0 res=1
[    0.041049] cpuidle: using governor ladder
[    0.041049] cpuidle: using governor menu
[    0.041049] ACPI: bus type PCI registered
[    0.041049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.041049] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.041049] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.041049] PCI: Using configuration type 1 for base access
[    0.041049] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.044437] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044437] ACPI: Added _OSI(Module Device)
[    0.044437] ACPI: Added _OSI(Processor Device)
[    0.044437] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044437] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044437] ACPI: Executed 1 blocks of module-level executable AML code
[    0.081680] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.081680] ACPI: Dynamic OEM Table Load:
[    0.081680] ACPI: SSDT 0xFFFF8A3AE57FB000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.081685] ACPI: Dynamic OEM Table Load:
[    0.081685] ACPI: SSDT 0xFFFF8A3AE512F000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.081685] ACPI: Dynamic OEM Table Load:
[    0.081685] ACPI: SSDT 0xFFFF8A3AE508CE00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.085398] ACPI: EC: EC started
[    0.085399] ACPI: EC: interrupt blocked
[    0.092105] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.092108] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.092110] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.092111] ACPI: Interpreter enabled
[    0.092150] ACPI: (supports S0 S1 S3 S4 S5)
[    0.092151] ACPI: Using IOAPIC for interrupt routing
[    0.092195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.092580] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.105490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.105499] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.105788] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.106874] PCI host bridge to bus 0000:00
[    0.106878] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.106880] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.106882] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.106884] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.106887] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.106899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.107041] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.107091] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.107221] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.107236] pci 0000:00:02.0: reg 0x10: [mem 0xf3000000-0xf33fffff 64bit]
[    0.107243] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107249] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.107607] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.107638] pci 0000:00:14.0: reg 0x10: [mem 0xf3700000-0xf370ffff 64bit]
[    0.107727] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.107850] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.107881] pci 0000:00:16.0: reg 0x10: [mem 0xf3715000-0xf371500f 64bit]
[    0.107970] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.108106] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.108133] pci 0000:00:1a.0: reg 0x10: [mem 0xf371a000-0xf371a3ff]
[    0.108232] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.108358] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.108386] pci 0000:00:1b.0: reg 0x10: [mem 0xf3710000-0xf3713fff 64bit]
[    0.108479] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.108608] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.108714] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.108846] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.108950] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.109079] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.109184] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.109315] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.109342] pci 0000:00:1d.0: reg 0x10: [mem 0xf3719000-0xf37193ff]
[    0.109441] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.109565] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.109799] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.109823] pci 0000:00:1f.2: reg 0x10: [io  0x4098-0x409f]
[    0.109832] pci 0000:00:1f.2: reg 0x14: [io  0x40bc-0x40bf]
[    0.109842] pci 0000:00:1f.2: reg 0x18: [io  0x4090-0x4097]
[    0.109851] pci 0000:00:1f.2: reg 0x1c: [io  0x40b8-0x40bb]
[    0.109861] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.109870] pci 0000:00:1f.2: reg 0x24: [mem 0xf3718000-0xf37187ff]
[    0.109924] pci 0000:00:1f.2: PME# supported from D3hot
[    0.110039] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.110063] pci 0000:00:1f.3: reg 0x10: [mem 0xf3714000-0xf37140ff 64bit]
[    0.110088] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.110286] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.110310] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[    0.110328] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.110345] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.110357] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.110368] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.120042] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.120046] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.120049] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf2ffffff]
[    0.120053] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.120130] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.120287] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
[    0.120421] pci 0000:03:00.0: reg 0x10: [mem 0xf3600000-0xf360ffff]
[    0.121093] pci 0000:03:00.0: supports D1 D2
[    0.121095] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.121376] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
[    0.121504] pci 0000:03:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.121630] pci 0000:03:00.2: reg 0x18: [mem 0xf3404000-0xf3404fff 64bit pref]
[    0.121707] pci 0000:03:00.2: reg 0x20: [mem 0xf3400000-0xf3403fff 64bit pref]
[    0.122098] pci 0000:03:00.2: supports D1 D2
[    0.122100] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.132129] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.132134] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.132139] pci 0000:00:1c.2:   bridge window [mem 0xf3600000-0xf36fffff]
[    0.132146] pci 0000:00:1c.2:   bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[    0.132260] pci 0000:04:00.0: [168c:0034] type 00 class 0x028000
[    0.132334] pci 0000:04:00.0: reg 0x10: [mem 0xf3500000-0xf357ffff 64bit]
[    0.132450] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.132608] pci 0000:04:00.0: supports D1 D2
[    0.132610] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144054] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.144062] pci 0000:00:1c.3:   bridge window [mem 0xf3500000-0xf35fffff]
[    0.144976] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.145097] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145214] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.145328] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.145441] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145555] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145669] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.145783] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.146162] ACPI: EC: interrupt unblocked
[    0.146171] ACPI: EC: event unblocked
[    0.146179] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.146181] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.146474] SCSI subsystem initialized
[    0.146494] libata version 3.00 loaded.
[    0.146494] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.146494] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.146494] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.146494] vgaarb: loaded
[    0.146494] ACPI: bus type USB registered
[    0.146494] usbcore: registered new interface driver usbfs
[    0.146494] usbcore: registered new interface driver hub
[    0.146494] usbcore: registered new device driver usb
[    0.146494] EDAC MC: Ver: 3.0.0
[    0.146494] PCI: Using ACPI for IRQ routing
[    0.148757] PCI: pci_cache_line_size set to 64 bytes
[    0.148835] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.148837] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.148838] e820: reserve RAM buffer [mem 0xb4e0a000-0xb7ffffff]
[    0.148840] e820: reserve RAM buffer [mem 0xc41ff000-0xc7ffffff]
[    0.148841] e820: reserve RAM buffer [mem 0xc7000000-0xc7ffffff]
[    0.148843] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[    0.148958] NetLabel: Initializing
[    0.148959] NetLabel:  domain hash size = 128
[    0.148960] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.148981] NetLabel:  unlabeled traffic allowed by default
[    0.149002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.149002] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.150110] clocksource: Switched to clocksource hpet
[    0.163402] VFS: Disk quotas dquot_6.6.0
[    0.163426] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.163558] AppArmor: AppArmor Filesystem Enabled
[    0.163594] pnp: PnP ACPI init
[    0.163824] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.163827] system 00:00: [io  0xffff] has been reserved
[    0.163830] system 00:00: [io  0xffff] has been reserved
[    0.163833] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.163835] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.163837] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.163841] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.163849] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.163890] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.163982] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.163989] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.164130] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.164163] pnp 00:04: Plug and Play ACPI device, IDs ETD0504 PNP0f13 (active)
[    0.164381] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.164386] pnp 00:05: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[    0.164417] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.164419] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.164422] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.164424] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.164426] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.164429] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.164431] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.164434] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.164436] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.164439] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.164445] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164901] pnp: PnP ACPI: found 6 devices
[    0.171775] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.171781] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.171785] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.171827] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.171829] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.171832] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.171834] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.171838] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf2ffffff]
[    0.171841] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.171846] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.171862] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.171866] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.171872] pci 0000:00:1c.2:   bridge window [mem 0xf3600000-0xf36fffff]
[    0.171877] pci 0000:00:1c.2:   bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[    0.171886] pci 0000:04:00.0: BAR 6: assigned [mem 0xf3580000-0xf358ffff pref]
[    0.171889] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.171895] pci 0000:00:1c.3:   bridge window [mem 0xf3500000-0xf35fffff]
[    0.171906] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.171909] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.171911] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.171913] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.171915] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.171917] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf2ffffff]
[    0.171919] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.171922] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.171924] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf36fffff]
[    0.171926] pci_bus 0000:03: resource 2 [mem 0xf3400000-0xf34fffff 64bit pref]
[    0.171928] pci_bus 0000:04: resource 1 [mem 0xf3500000-0xf35fffff]
[    0.172093] NET: Registered protocol family 2
[    0.172341] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.172509] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.172650] TCP: Hash tables configured (established 65536 bind 65536)
[    0.172700] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.172729] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.172803] NET: Registered protocol family 1
[    0.172823] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.173646] PCI: CLS 64 bytes, default 64
[    0.173704] Unpacking initramfs...
[    1.159301] Freeing initrd memory: 45284K
[    1.159361] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.159365] software IO TLB [mem 0xc01ff000-0xc41ff000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.159714] Scanning for low memory corruption every 60 seconds
[    1.160632] Initialise system trusted keyrings
[    1.160645] Key type blacklist registered
[    1.160686] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.162190] zbud: loaded
[    1.162863] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.163039] fuse init (API version 7.26)
[    1.164775] Key type asymmetric registered
[    1.164776] Asymmetric key parser 'x509' registered
[    1.164818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.164867] io scheduler noop registered
[    1.164869] io scheduler deadline registered
[    1.164923] io scheduler cfq registered (default)
[    1.165932] intel_idle: MWAIT substates: 0x21120
[    1.165933] intel_idle: v0.4.1 model 0x3A
[    1.166128] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.166275] ACPI: AC Adapter [ADP1] (on-line)
[    1.166366] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.166401] ACPI: Lid Switch [LID0]
[    1.166447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.166476] ACPI: Sleep Button [SLPB]
[    1.166521] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.166547] ACPI: Power Button [PWRF]
[    1.167880] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.168061] thermal LNXTHERM:00: registered as thermal_zone0
[    1.168062] ACPI: Thermal Zone [TZS0] (76 C)
[    1.168498] thermal LNXTHERM:01: registered as thermal_zone1
[    1.168499] ACPI: Thermal Zone [TZS1] (63 C)
[    1.168747] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.170222] ACPI: Battery Slot [BAT0] (battery present)
[    1.171991] Linux agpgart interface v0.103
[    1.174117] loop: module loaded
[    1.174328] libphy: Fixed MDIO Bus: probed
[    1.174330] tun: Universal TUN/TAP device driver, 1.6
[    1.174371] PPP generic driver version 2.4.2
[    1.174423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.174426] ehci-pci: EHCI PCI platform driver
[    1.174598] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.174606] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.174622] ehci-pci 0000:00:1a.0: debug port 2
[    1.178521] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.178543] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf371a000
[    1.192091] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.192180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.192183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.192185] usb usb1: Product: EHCI Host Controller
[    1.192187] usb usb1: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    1.192189] usb usb1: SerialNumber: 0000:00:1a.0
[    1.192492] hub 1-0:1.0: USB hub found
[    1.192506] hub 1-0:1.0: 2 ports detected
[    1.192927] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.192940] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.192959] ehci-pci 0000:00:1d.0: debug port 2
[    1.196862] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.196887] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3719000
[    1.212102] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.212192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.212195] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.212197] usb usb2: Product: EHCI Host Controller
[    1.212199] usb usb2: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    1.212201] usb usb2: SerialNumber: 0000:00:1d.0
[    1.212504] hub 2-0:1.0: USB hub found
[    1.212516] hub 2-0:1.0: 2 ports detected
[    1.212732] ehci-platform: EHCI generic platform driver
[    1.212754] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.212761] ohci-pci: OHCI PCI platform driver
[    1.212779] ohci-platform: OHCI generic platform driver
[    1.212789] uhci_hcd: USB Universal Host Controller Interface driver
[    1.213069] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.213077] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.214176] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.214183] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.214357] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.214359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.214361] usb usb3: Product: xHCI Host Controller
[    1.214363] usb usb3: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    1.214365] usb usb3: SerialNumber: 0000:00:14.0
[    1.214610] hub 3-0:1.0: USB hub found
[    1.214624] hub 3-0:1.0: 4 ports detected
[    1.215235] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.215240] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.215282] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.215284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.215286] usb usb4: Product: xHCI Host Controller
[    1.215288] usb usb4: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    1.215290] usb usb4: SerialNumber: 0000:00:14.0
[    1.215531] hub 4-0:1.0: USB hub found
[    1.215544] hub 4-0:1.0: 4 ports detected
[    1.216246] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.219435] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.219441] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.219727] mousedev: PS/2 mouse device common for all mice
[    1.219963] rtc_cmos 00:01: RTC can wake from S4
[    1.220183] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.220216] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.220227] i2c /dev entries driver
[    1.220292] device-mapper: uevent: version 1.0.3
[    1.220382] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.220391] intel_pstate: Intel P-state driver initializing
[    1.220624] ledtrig-cpu: registered to indicate activity on CPUs
[    1.221004] NET: Registered protocol family 10
[    1.224827] Segment Routing with IPv6
[    1.224850] NET: Registered protocol family 17
[    1.224887] Key type dns_resolver registered
[    1.225129] RAS: Correctable Errors collector initialized.
[    1.225165] microcode: sig=0x306a9, pf=0x10, revision=0x1f
[    1.225232] microcode: Microcode Update Driver: v2.2.
[    1.225241] sched_clock: Marking stable (1225228046, 0)->(1207929842, 17298204)
[    1.225450] registered taskstats version 1
[    1.225458] Loading compiled-in X.509 certificates
[    1.227929] Loaded X.509 cert 'Build time autogenerated kernel key: d64bd6be71bc1eefa448ca9d60aedd81597cd233'
[    1.227955] zswap: loaded using pool lzo/zbud
[    1.231251] Key type big_key registered
[    1.231255] Key type trusted registered
[    1.232845] Key type encrypted registered
[    1.232849] AppArmor: AppArmor sha1 policy hashing enabled
[    1.232851] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.232869] evm: HMAC attrs: 0x1
[    1.233471]   Magic number: 11:870:269
[    1.233583] rtc_cmos 00:01: setting system clock to 2019-07-04 08:16:29 UTC (1562228189)
[    1.233639] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.233639] EDD information not available.
[    1.236295] Freeing unused kernel memory: 2408K
[    1.243973] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.252148] Write protecting the kernel read-only data: 20480k
[    1.252705] Freeing unused kernel memory: 2008K
[    1.256597] Freeing unused kernel memory: 1916K
[    1.263418] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.263419] x86/mm: Checking user space page tables
[    1.270117] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.356985] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.364318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.364327] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.365277] r8169 0000:03:00.2 eth0: RTL8411 at 0x        (ptrval), 20:6a:8a:fc:c3:38, XID 08800800 IRQ 28
[    1.365279] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.376805] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.378160] ahci 0000:00:1f.2: version 3.0
[    1.388467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    1.388473] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.391545] AVX version of gcm_enc/dec engaged.
[    1.391545] AES CTR mode by8 optimization enabled
[    1.404309] r8169 0000:03:00.2 enp3s0f2: renamed from eth0
[    1.406802] scsi host0: ahci
[    1.406954] scsi host1: ahci
[    1.407064] scsi host2: ahci
[    1.407168] scsi host3: ahci
[    1.407413] scsi host4: ahci
[    1.407609] scsi host5: ahci
[    1.407663] ata1: SATA max UDMA/133 abar m2048@0xf3718000 port 0xf3718100 irq 29
[    1.407665] ata2: DUMMY
[    1.407666] ata3: DUMMY
[    1.407667] ata4: DUMMY
[    1.407671] ata5: SATA max UDMA/133 abar m2048@0xf3718000 port 0xf3718300 irq 29
[    1.407672] ata6: DUMMY
[    1.428005] [drm] Memory usable by graphics device = 2048M
[    1.428007] [drm] Replacing VGA console driver
[    1.429084] Console: switching to colour dummy device 80x25
[    1.429131] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
[    1.435660] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.435662] [drm] Driver supports precise vblank timestamp query.
[    1.438782] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.478293] [drm] LVDS was detected, not registering eDP
[    1.482997] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.483121] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.483319] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input6
[    1.484552] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.484695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.520988] fbcon: inteldrmfb (fb0) is primary device
[    1.528098] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.548143] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    1.548160] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.684855] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.684857] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.685345] hub 1-1:1.0: USB hub found
[    1.685529] hub 1-1:1.0: 6 ports detected
[    1.704861] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.704863] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.705216] hub 2-1:1.0: USB hub found
[    1.705401] hub 2-1:1.0: 8 ports detected
[    1.723602] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.723625] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.724682] ata5.00: ATA-8: Hitachi HTS545050A7E380, GG2OA920, max UDMA/133
[    1.724687] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.725178] ata1.00: supports DRM functions and may not be fully accessible
[    1.725894] ata5.00: configured for UDMA/133
[    1.725950] ata1.00: disabling queued TRIM support
[    1.725952] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT03B6Q, max UDMA/133
[    1.725955] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.728087] ata1.00: supports DRM functions and may not be fully accessible
[    1.728796] ata1.00: disabling queued TRIM support
[    1.730494] ata1.00: configured for UDMA/133
[    1.730796] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  3B6Q PQ: 0 ANSI: 5
[    1.731161] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.731174] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.731186] sd 0:0:0:0: [sda] Write Protect is off
[    1.731188] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.731208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.731481] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A920 PQ: 0 ANSI: 5
[    1.731718] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.731754] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.731756] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    1.731783] sd 4:0:0:0: [sdb] Write Protect is off
[    1.731785] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.731830] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.731860]  sda: sda1 sda2 sda3 < sda5 >
[    1.732609] sd 0:0:0:0: [sda] supports TCG Opal
[    1.732611] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.749997] usb 3-4: New USB device found, idVendor=04f2, idProduct=b335
[    1.750009] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.750011] usb 3-4: Product: HD WebCam
[    1.750012] usb 3-4: Manufacturer: SunplusIT INC.
[    1.844486]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 >
[    1.845546] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.936625] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f0e)
[    1.947989] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[    1.959318] psmouse serio1: elantech: Elan sample query result 02, 5d, 85
[    2.020692] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.172146] tsc: Refined TSC clocksource calibration: 1795.923 MHz
[    2.172166] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31e3a1e3, max_idle_ns: 440795283323 ns
[    2.476236] Console: switching to colour frame buffer device 170x48
[    2.495131] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.518955] random: fast init done
[    2.521690] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522091] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522102] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522104] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522115] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522121] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522130] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522131] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522144] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522219] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.522234] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.196316] clocksource: Switched to clocksource tsc
[    3.616070] raid6: sse2x1   gen()  7808 MB/s
[    3.664065] raid6: sse2x1   xor()  5654 MB/s
[    3.712061] raid6: sse2x2   gen()  9400 MB/s
[    3.760066] raid6: sse2x2   xor()  6262 MB/s
[    3.808066] raid6: sse2x4   gen() 11069 MB/s
[    3.856063] raid6: sse2x4   xor()  7675 MB/s
[    3.856065] raid6: using algorithm sse2x4 gen() 11069 MB/s
[    3.856066] raid6: .... xor() 7675 MB/s, rmw enabled
[    3.856066] raid6: using ssse3x2 recovery algorithm
[    3.857179] xor: automatically using best checksumming function   avx       
[    3.858228] async_tx: api initialized (async)
[    3.953975] Btrfs loaded, crc32c=crc32c-intel
[    4.629868] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.732866] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    4.749853] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.757379] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.776179] systemd[1]: Detected architecture x86-64.
[    4.778142] systemd[1]: Set hostname to <zhao-PC>.
[    4.846647] systemd[1]: Created slice User and Session Slice.
[    4.846707] systemd[1]: Reached target Slices.
[    4.846720] systemd[1]: Reached target User and Group Name Lookups.
[    4.846787] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.846800] systemd[1]: Reached target Remote File Systems.
[    4.846844] systemd[1]: Listening on udev Kernel Socket.
[    4.846902] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.858894] vfs_monitor: loading out-of-tree module taints kernel.
[    4.858930] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[    4.859348] mp: /, major: 8, minor: 2
[    4.859350] partition count: 1, comm[347]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[    4.863444] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    4.976124] systemd-journald[357]: Received request to flush runtime journal from PID 1
[    4.986427] register_kretprobes 10 ok
[    5.000413] lp: driver loaded but no devices found
[    5.007775] ppdev: user-space parallel port driver
[    5.032174] ipmi message handler version 39.2
[    5.034337] ipmi device interface
[    5.076432] nvidia: module license 'NVIDIA' taints kernel.
[    5.076433] Disabling lock debugging due to kernel taint
[    5.090312] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[    5.090591] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    5.090834] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.67  Fri Jun  1 04:04:27 PDT 2018 (using threaded interrupts)
[    5.111644] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.67  Fri Jun  1 03:15:43 PDT 2018
[    5.127454] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    5.127456] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    5.194409] random: crng init done
[    5.625324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.646211] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    5.646221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.646225] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    5.646231] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[    5.646237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.646239] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    5.646244] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[    5.646250] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.646251] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    5.646257] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[    5.646262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.646263] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.779507] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.834817] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.835069] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.835106] acer_wmi: Function bitmap for Communication Button: 0x801
[    5.836620] input: Acer WMI hotkeys as /devices/virtual/input/input9
[    5.856583] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.856894] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.856896] cfg80211: failed to load regulatory.db
[    5.914031] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[    5.944030] Error: Driver 'pcspkr' is already registered, aborting...
[    6.016204] r8169 0000:03:00.2 enp3s0f2: link down
[    6.017395] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[    6.061457] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.061459] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.061460] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.061461] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.100945] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.121460] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    6.160757] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC271X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.160761] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.160764] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.160766] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.160767] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.160770] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[    6.187153] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.187234] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.262985] media: Linux media interface: v0.10
[    6.351612] Linux video capture interface: v2.00
[    6.380620] nvidia-modeset: Allocated GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[    6.380990] nvidia-modeset: Freed GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[    6.386409] ath: phy0: ASPM enabled: 0x43
[    6.386413] ath: EEPROM regdomain: 0x6c
[    6.386413] ath: EEPROM indicates we should expect a direct regpair map
[    6.386416] ath: Country alpha2 being used: 00
[    6.386416] ath: Regpair used: 0x6c
[    6.404633] intel_rapl: Found RAPL domain package
[    6.404636] intel_rapl: Found RAPL domain core
[    6.404637] intel_rapl: Found RAPL domain uncore
[    6.404642] intel_rapl: RAPL package 0 domain package locked by BIOS
[    6.414607] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.417283] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb3e241e80000, irq=19
[    6.450283] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b335)
[    6.460490] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!
[    6.460494] uvcvideo 3-4:1.0: Entity type for entity Extension 3 was not initialized!
[    6.460497] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!
[    6.460499] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
[    6.461195] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input12
[    6.461917] usbcore: registered new interface driver uvcvideo
[    6.461919] USB Video Class driver (1.1.1)
[    6.750564] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[    6.776006] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    6.789709] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    6.849261] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    7.050308] nvidia-modeset: Allocated GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[    7.050599] nvidia-modeset: Freed GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[   10.526216] wlp4s0: authenticate with b8:ba:68:c6:c4:e1
[   10.537006] wlp4s0: send auth to b8:ba:68:c6:c4:e1 (try 1/3)
[   10.538911] wlp4s0: authenticated
[   10.540088] wlp4s0: associate with b8:ba:68:c6:c4:e1 (try 1/3)
[   10.548977] wlp4s0: RX AssocResp from b8:ba:68:c6:c4:e1 (capab=0x411 status=0 aid=3)
[   10.549138] wlp4s0: associated
[   10.574467] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   14.395063] nvidia-modeset: Allocated GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[   14.395251] nvidia-modeset: Freed GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[   18.253649] NET: Registered protocol family 15
[   18.366804] Initializing XFRM netlink socket
[   18.400146] NET: Registered protocol family 38
[   18.512594] AVX2 or AES-NI instructions are not detected.
[   18.639492] AVX2 instructions are not detected.
[   18.937418] partition /media/zhao/08540836540828D0 [8, 22] added, comm[3815]: mount.ntfs
[   19.007284] partition /media/zhao/0005D60F00010F45 [8, 5] added, comm[3824]: mount.ntfs
[   19.071553] partition /media/zhao/0003D89800022D68 [8, 1] added, comm[3830]: mount.ntfs
[   19.230159] partition /media/zhao/981675351675158A [8, 21] added, comm[3836]: mount.ntfs
[   19.445457] partition /media/zhao/006C29CB6C29BC72 [8, 24] added, comm[3842]: mount.ntfs
[   47.979754] nvidia-modeset: Allocated GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[   47.979941] nvidia-modeset: Freed GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[  146.147300] nvidia-modeset: Allocated GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[  146.147599] nvidia-modeset: Freed GPU:0 (GPU-d9055b89-b4a0-011a-cdd1-ecad16da97e3) @ PCI:0000:01:00.0
[  430.261606] wlp4s0: deauthenticating from b8:ba:68:c6:c4:e1 by local choice (Reason: 3=DEAUTH_LEAVING)
[  430.315017] wlp4s0: authenticate with 34:d7:12:8f:19:4e
[  430.325916] wlp4s0: send auth to 34:d7:12:8f:19:4e (try 1/3)
[  430.329130] wlp4s0: authenticated
[  430.332708] wlp4s0: associate with 34:d7:12:8f:19:4e (try 1/3)
[  430.340734] wlp4s0: RX AssocResp from 34:d7:12:8f:19:4e (capab=0x1431 status=0 aid=1)
[  430.340950] wlp4s0: associated
[  500.284039] wlp4s0: deauthenticating from 34:d7:12:8f:19:4e by local choice (Reason: 3=DEAUTH_LEAVING)
[  500.737534] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  507.362644] wlp4s0: authenticate with b8:ba:68:c6:c4:e1
[  507.376742] wlp4s0: send auth to b8:ba:68:c6:c4:e1 (try 1/3)
[  507.378652] wlp4s0: authenticated
[  507.381612] wlp4s0: associate with b8:ba:68:c6:c4:e1 (try 1/3)
[  507.390503] wlp4s0: RX AssocResp from b8:ba:68:c6:c4:e1 (capab=0x411 status=0 aid=3)
[  507.390664] wlp4s0: associated
[  507.397905] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 2563.892925] wlp4s0: deauthenticating from b8:ba:68:c6:c4:e1 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2568.902486] PM: suspend entry (deep)
[ 2568.902488] PM: Syncing filesystems ... done.
[ 2569.164834] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2569.166878] OOM killer disabled.
[ 2569.166879] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2569.168136] Suspending console(s) (use no_console_suspend to debug)
[ 2569.183650] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 2569.183821] sd 4:0:0:0: [sdb] Stopping disk
[ 2569.192575] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2569.194156] sd 0:0:0:0: [sda] Stopping disk
[ 2569.824162] ACPI: EC: interrupt blocked
[ 2569.843933] ACPI: Preparing to enter system sleep state S3
[ 2569.845971] ACPI: EC: event blocked
[ 2569.845972] ACPI: EC: EC stopped
[ 2569.845972] PM: Saving platform NVS memory
[ 2569.845981] Disabling non-boot CPUs ...
[ 2569.860979] smpboot: CPU 1 is now offline
[ 2569.880747] smpboot: CPU 2 is now offline
[ 2569.904704] smpboot: CPU 3 is now offline
[ 2569.907641] ACPI: Low-level resume complete
[ 2569.907709] ACPI: EC: EC started
[ 2569.907710] PM: Restoring platform NVS memory
[ 2569.909344] Enabling non-boot CPUs ...
[ 2569.909428] x86: Booting SMP configuration:
[ 2569.909430] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2569.912103]  cache: parent cpu1 should not be sleeping
[ 2569.912357] CPU1 is up
[ 2569.912440] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2569.915921]  cache: parent cpu2 should not be sleeping
[ 2569.916200] CPU2 is up
[ 2569.916258] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2569.918809]  cache: parent cpu3 should not be sleeping
[ 2569.919098] CPU3 is up
[ 2569.923022] ACPI: Waking up from system sleep state S3
[ 2569.927690] ACPI: EC: interrupt unblocked
[ 2569.946357] ACPI: EC: event unblocked
[ 2569.946790] ath: phy0: ASPM enabled: 0x43
[ 2569.951564] ACPI: button: The lid device is not compliant to SW_LID.
[ 2569.953138] sd 0:0:0:0: [sda] Starting disk
[ 2569.953140] sd 4:0:0:0: [sdb] Starting disk
[ 2570.185391] usb 3-4: reset high-speed USB device number 2 using xhci_hcd
[ 2570.276057] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2570.276399] ata1.00: supports DRM functions and may not be fully accessible
[ 2570.277464] ata1.00: disabling queued TRIM support
[ 2570.279764] ata1.00: supports DRM functions and may not be fully accessible
[ 2570.280630] ata1.00: disabling queued TRIM support
[ 2570.282492] ata1.00: configured for UDMA/133
[ 2570.377664] OOM killer enabled.
[ 2570.377666] Restarting tasks ... done.
[ 2570.389115] PM: suspend exit
[ 2570.435984] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[ 2570.500291] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2570.518981] r8169 0000:03:00.2 enp3s0f2: link down
[ 2570.519120] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[ 2570.520830] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2570.535907] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2570.602087] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2570.611920] usb 1-1.4: string descriptor 0 read error: -22
[ 2570.611930] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e04e
[ 2570.611932] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2572.256797] usb 1-1.4: USB disconnect, device number 3
[ 2572.557115] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2572.559276] ata5.00: configured for UDMA/133
[ 2572.620204] Bluetooth: Core ver 2.22
[ 2572.620235] NET: Registered protocol family 31
[ 2572.620236] Bluetooth: HCI device and connection manager initialized
[ 2572.620241] Bluetooth: HCI socket layer initialized
[ 2572.620244] Bluetooth: L2CAP socket layer initialized
[ 2572.620253] Bluetooth: SCO socket layer initialized
[ 2572.637293] usbcore: registered new interface driver btusb
[ 2572.641134] usbcore: registered new interface driver ath3k
[ 2574.232699] wlp4s0: authenticate with b8:ba:68:c6:c4:e1
[ 2574.243606] wlp4s0: send auth to b8:ba:68:c6:c4:e1 (try 1/3)
[ 2574.245487] wlp4s0: authenticated
[ 2574.249106] wlp4s0: associate with b8:ba:68:c6:c4:e1 (try 1/3)
[ 2574.258001] wlp4s0: RX AssocResp from b8:ba:68:c6:c4:e1 (capab=0x411 status=0 aid=3)
[ 2574.258169] wlp4s0: associated
[ 2574.265414] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 3603.722130] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3603.732852] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3603.752280] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 3603.785348] QNX4 filesystem 0.2.3 registered.
[ 3604.587047] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 3604.595644] EXT4-fs (sda3): unable to read superblock
[ 3604.595709] EXT4-fs (sda3): unable to read superblock
[ 3604.595768] EXT4-fs (sda3): unable to read superblock
[ 3604.634385] EXT4-fs (sdb1): unable to read superblock
[ 3604.634471] EXT4-fs (sdb1): unable to read superblock
[ 3604.634534] EXT4-fs (sdb1): unable to read superblock
[ 5166.028939] rtsx_pci 0000:03:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[ 5166.036213] r8169 0000:03:00.2: invalid short VPD tag 00 at offset 1
