[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.15.0-29deepin-generic (pbuilder@zs-PC) (gcc version 7.3.0 (Debian 7.3.0-19)) #31 SMP Fri Jul 27 07:12:08 UTC 2018 (Ubuntu 4.15.0-29deepin.31-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=83eba2b7-6c21-4884-9e71-89d4ccf8efd8 ro splash quiet DEEPIN_GFXMODE=0,1920x1080,1024x768,1280x1024
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bba36fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bba37000-0x00000000bba3dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bba3e000-0x00000000bbe68fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbe69000-0x00000000bc165fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc166000-0x00000000caa33fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caa34000-0x00000000cad96fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cad97000-0x00000000cadb9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cadba000-0x00000000cb43dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cb43e000-0x00000000cbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HaierComputer S500/C15B, BIOS C15B.616 03/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0120000000 mask 7FF0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CE000000 mask 7FFE000000 uncachable
[    0.000000]   6 base 00CD000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 012FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4046M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd4c0-0x000fd4cf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x65f3f000, 0x65f3ffff] PGTABLE
[    0.000000] BRK [0x65f40000, 0x65f40fff] PGTABLE
[    0.000000] BRK [0x65f41000, 0x65f41fff] PGTABLE
[    0.000000] BRK [0x65f42000, 0x65f42fff] PGTABLE
[    0.000000] BRK [0x65f43000, 0x65f43fff] PGTABLE
[    0.000000] BRK [0x65f44000, 0x65f44fff] PGTABLE
[    0.000000] BRK [0x65f45000, 0x65f45fff] PGTABLE
[    0.000000] BRK [0x65f46000, 0x65f46fff] PGTABLE
[    0.000000] BRK [0x65f47000, 0x65f47fff] PGTABLE
[    0.000000] BRK [0x65f48000, 0x65f48fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32787000-0x353bafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 PEGA  )
[    0.000000] ACPI: XSDT 0x00000000CAD9F088 000094 (v01 PEGA   PEGANB   00000001 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CADB6AC0 00010C (v05 PEGA   PEGANB   00000001 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CAD9F1B0 017909 (v02 PEGA   PEGANB   00000616 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000CB43B080 000040
[    0.000000] ACPI: APIC 0x00000000CADB6BD0 000072 (v03 PEGA   PEGANB   00000001 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CADB6C48 000044 (v01 PEGA   PEGANB   00000001 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000CADB6C90 0000C1 (v01 PEGA   PEGANB   00000001 AMI. 00000005)
[    0.000000] ACPI: MDSX 0x00000000CADB6D58 000055 (v03 PEGA   PEGANB   00000001 MSFT 00010013)
[    0.000000] ACPI: LPIT 0x00000000CADB6DB0 00005C (v01 PEGA   PEGANB   00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CADB6E10 000228 (v01 PEGA   PEGANB   00000000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CADB7038 000557 (v01 PEGA   PEGANB   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CADB7590 000AD8 (v01 PEGA   PEGANB   00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000CADB8068 00003C (v01 PEGA   PEGANB   00000001 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CADB80A8 000038 (v01 PEGA   PEGANB   00000001 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CADB80E0 000315 (v01 PEGA   PEGANB   00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CADB83F8 0019F9 (v01 PEGA   PEGANB   00003000 INTL 20091112)
[    0.000000] ACPI: XGYT 0x00000000CADB9DF8 000038 (v00 PEGA   PEGANB   00000000 MSFT 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fdd3000-0x12fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bba36fff]
[    0.000000]   node   0: [mem 0x00000000bba3e000-0x00000000bbe68fff]
[    0.000000]   node   0: [mem 0x00000000bc166000-0x00000000caa33fff]
[    0.000000]   node   0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fdfffff]
[    0.000000] On node 0 totalpages: 1025229
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12893 pages used for memmap
[    0.000000]   DMA32 zone: 825137 pages, LIFO batch:31
[    0.000000]   Normal zone: 3064 pages used for memmap
[    0.000000]   Normal zone: 196096 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 101 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba37000-0xbba3dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbe69000-0xbc165fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaa34000-0xcad96fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad97000-0xcadb9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcadba000-0xcb43dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb43e000-0xcbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1009187
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=83eba2b7-6c21-4884-9e71-89d4ccf8efd8 ro splash quiet DEEPIN_GFXMODE=0,1920x1080,1024x768,1280x1024
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3895156K/4100916K available (12300K kernel code, 2470K rwdata, 4228K rodata, 2408K init, 2416K bss, 205760K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39092 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2594.049 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.09 BogoMIPS (lpj=10376196)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Vulnerable
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.029210] TSC deadline timer enabled
[    0.029212] smpboot: CPU0: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.029269] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.029301] ... version:                3
[    0.029302] ... bit width:              48
[    0.029302] ... generic registers:      4
[    0.029303] ... value mask:             0000ffffffffffff
[    0.029303] ... max period:             00007fffffffffff
[    0.029304] ... fixed-purpose events:   3
[    0.029304] ... event mask:             000000070000000f
[    0.029333] Hierarchical SRCU implementation.
[    0.030103] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.030115] smp: Bringing up secondary CPUs ...
[    0.030174] x86: Booting SMP configuration:
[    0.030175] .... node  #0, CPUs:      #1 #2 #3
[    0.031610] smp: Brought up 1 node, 4 CPUs
[    0.031610] smpboot: Max logical packages: 1
[    0.031610] smpboot: Total of 4 processors activated (20752.39 BogoMIPS)
[    0.032189] devtmpfs: initialized
[    0.032189] x86/mm: Memory block size: 128MB
[    0.032317] evm: security.selinux
[    0.032318] evm: security.SMACK64
[    0.032318] evm: security.SMACK64EXEC
[    0.032319] evm: security.SMACK64TRANSMUTE
[    0.032319] evm: security.SMACK64MMAP
[    0.032319] evm: security.apparmor
[    0.032320] evm: security.ima
[    0.032320] evm: security.capability
[    0.032331] PM: Registering ACPI NVS region [mem 0xbba37000-0xbba3dfff] (28672 bytes)
[    0.032331] PM: Registering ACPI NVS region [mem 0xcadba000-0xcb43dfff] (6832128 bytes)
[    0.032331] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.032331] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.032331] pinctrl core: initialized pinctrl subsystem
[    0.032331] RTC time:  0:18:30, date: 12/26/18
[    0.032331] NET: Registered protocol family 16
[    0.032331] audit: initializing netlink subsys (disabled)
[    0.032331] audit: type=2000 audit(1545783510.032:1): state=initialized audit_enabled=0 res=1
[    0.032331] cpuidle: using governor ladder
[    0.032331] cpuidle: using governor menu
[    0.032331] ACPI: bus type PCI registered
[    0.032331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.032331] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.032331] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.032331] PCI: Using configuration type 1 for base access
[    0.032331] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.032844] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.032844] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.032844] ACPI: Added _OSI(Module Device)
[    0.032844] ACPI: Added _OSI(Processor Device)
[    0.032844] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.032844] ACPI: Added _OSI(Processor Aggregator Device)
[    0.032844] ACPI: Added _OSI(Linux-Dell-Video)
[    0.032844] ACPI: EC: EC started
[    0.032844] ACPI: EC: interrupt blocked
[    0.033403] ACPI: \: Used as first EC
[    0.033404] ACPI: \: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.033405] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.033524] ACPI: Executed 1 blocks of module-level executable AML code
[    0.041894] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.042107] ACPI: Dynamic OEM Table Load:
[    0.042107] ACPI: SSDT 0xFFFF94C1AA7B1400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.042109] ACPI: Dynamic OEM Table Load:
[    0.042109] ACPI: SSDT 0xFFFF94C1AA6B2800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.044361] ACPI: Dynamic OEM Table Load:
[    0.044361] ACPI: SSDT 0xFFFF94C1AA75D800 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.044720] ACPI: Interpreter enabled
[    0.044752] ACPI: (supports S0 S3 S4 S5)
[    0.044753] ACPI: Using IOAPIC for interrupt routing
[    0.044781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.045066] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.048941] ACPI: Power Resource [PG00] (on)
[    0.066228] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.066233] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.066920] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.067361] PCI host bridge to bus 0000:00
[    0.067363] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.067364] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.067365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.067366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.067367] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.067368] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.067369] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.067370] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.067371] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.067372] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.067373] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.067380] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.067457] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.067488] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.067599] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.067608] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.067613] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.067616] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.067719] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.067727] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[    0.067823] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.067842] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.067896] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.067957] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.067977] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[    0.068034] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.068102] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.068122] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[    0.068196] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.068263] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.068280] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[    0.068342] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.068410] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.068474] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.068585] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.068649] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.068757] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.068821] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.068932] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.068952] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[    0.069027] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.069094] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.069248] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.069263] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.069269] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.069276] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.069283] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.069289] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.069296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[    0.069327] pci 0000:00:1f.2: PME# supported from D3hot
[    0.069388] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.069405] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[    0.069423] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.069538] pci 0000:01:00.0: [10de:1341] type 00 class 0x030200
[    0.069563] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.069580] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.069596] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.069606] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.069617] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.080030] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.080032] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.080034] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.080037] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.080098] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.080231] pci 0000:03:00.0: [10ec:8179] type 00 class 0x028000
[    0.080265] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.080297] pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7903fff 64bit]
[    0.080460] pci 0000:03:00.0: supports D1 D2
[    0.080461] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.092084] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.092088] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.092091] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.092175] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.092205] pci 0000:04:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.092233] pci 0000:04:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[    0.092250] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.092349] pci 0000:04:00.0: supports D1 D2
[    0.092350] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104034] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.104037] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.104041] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.104046] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.116195] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.116259] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.116324] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12)
[    0.116387] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[    0.116449] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.116511] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 12)
[    0.116573] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
[    0.116635] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[    0.117062] ACPI: EC: interrupt unblocked
[    0.117068] ACPI: EC: event unblocked
[    0.117074] ACPI: \_SB_.PCI0.LPCB.IEC_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.117076] ACPI: \_SB_.PCI0.LPCB.IEC_: Used as boot DSDT EC to handle transactions and events
[    0.117277] SCSI subsystem initialized
[    0.117290] libata version 3.00 loaded.
[    0.117290] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.117290] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.117290] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.117290] vgaarb: loaded
[    0.117290] ACPI: bus type USB registered
[    0.117290] usbcore: registered new interface driver usbfs
[    0.117290] usbcore: registered new interface driver hub
[    0.117290] usbcore: registered new device driver usb
[    0.117290] EDAC MC: Ver: 3.0.0
[    0.117290] PCI: Using ACPI for IRQ routing
[    0.117347] PCI: pci_cache_line_size set to 64 bytes
[    0.117398] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.117399] e820: reserve RAM buffer [mem 0xbba37000-0xbbffffff]
[    0.117400] e820: reserve RAM buffer [mem 0xbbe69000-0xbbffffff]
[    0.117401] e820: reserve RAM buffer [mem 0xcaa34000-0xcbffffff]
[    0.117402] e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff]
[    0.117474] NetLabel: Initializing
[    0.117474] NetLabel:  domain hash size = 128
[    0.117475] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.117485] NetLabel:  unlabeled traffic allowed by default
[    0.120045] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.120049] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.122018] clocksource: Switched to clocksource hpet
[    0.128516] VFS: Disk quotas dquot_6.6.0
[    0.128532] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.128614] AppArmor: AppArmor Filesystem Enabled
[    0.128640] pnp: PnP ACPI init
[    0.128934] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.128936] system 00:00: [io  0xffff] has been reserved
[    0.128937] system 00:00: [io  0xffff] has been reserved
[    0.128939] system 00:00: [io  0xffff] has been reserved
[    0.128940] system 00:00: [io  0x1c00-0x1cfe] has been reserved
[    0.128941] system 00:00: [io  0x1d00-0x1dfe] has been reserved
[    0.128942] system 00:00: [io  0x1e00-0x1efe] has been reserved
[    0.128943] system 00:00: [io  0x1f00-0x1ffe] has been reserved
[    0.128944] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.128946] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.128950] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128972] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.129020] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.129023] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.129070] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.129073] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129147] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.129151] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129215] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.129217] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.129218] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.129221] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129276] pnp 00:06: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active)
[    0.129312] pnp 00:07: Plug and Play ACPI device, IDs PNPc030 PNP0303 (active)
[    0.129340] system 00:08: [io  0x0240-0x0259] has been reserved
[    0.129343] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129837] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.129839] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.129840] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.129841] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.129842] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.129844] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.129845] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.129846] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.129847] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.129849] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.129850] system 00:09: [mem 0xf7fee000-0xf7feefff] has been reserved
[    0.129851] system 00:09: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[    0.129854] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.140268] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.140270] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.140273] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.140468] pnp: PnP ACPI: found 11 devices
[    0.146437] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.146453] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.146455] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.146456] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.146474] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[    0.146479] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.146481] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.146484] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.146485] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.146487] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.146489] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.146492] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.146494] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.146498] pci 0000:00:1c.0:   bridge window [mem 0xcf200000-0xcf3fffff]
[    0.146501] pci 0000:00:1c.0:   bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.146506] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.146509] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.146513] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.146519] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.146522] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.146526] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.146528] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.146534] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.146535] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.146536] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.146537] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.146538] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.146540] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.146541] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.146542] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.146543] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.146544] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[    0.146545] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.146546] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.146547] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.146549] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.146550] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
[    0.146551] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.146552] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.146553] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.146554] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.146555] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.146556] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.146670] NET: Registered protocol family 2
[    0.146841] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.146899] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.146993] TCP: Hash tables configured (established 32768 bind 32768)
[    0.147019] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.147034] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.147077] NET: Registered protocol family 1
[    0.147088] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.192123] PCI: CLS 64 bytes, default 64
[    0.192158] Unpacking initramfs...
[    0.718151] Freeing initrd memory: 45264K
[    0.718162] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.718164] software IO TLB [mem 0xc6a34000-0xcaa34000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.718355] Scanning for low memory corruption every 60 seconds
[    0.718859] Initialise system trusted keyrings
[    0.718866] Key type blacklist registered
[    0.718898] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.719701] zbud: loaded
[    0.720078] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.720176] fuse init (API version 7.26)
[    0.721184] Key type asymmetric registered
[    0.721184] Asymmetric key parser 'x509' registered
[    0.721205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.721232] io scheduler noop registered
[    0.721232] io scheduler deadline registered
[    0.721260] io scheduler cfq registered (default)
[    0.721924] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.721944] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.721961] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    0.721977] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[    0.721993] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.722052] intel_idle: MWAIT substates: 0x42120
[    0.722053] intel_idle: v0.4.1 model 0x3C
[    0.722158] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.722282] ACPI: AC Adapter [AC0] (on-line)
[    0.722336] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.722357] ACPI: Lid Switch [LID]
[    0.722381] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.722396] ACPI: Sleep Button [SLPB]
[    0.722422] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.722437] ACPI: Power Button [PWRF]
[    0.723133] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.723243] thermal LNXTHERM:00: registered as thermal_zone0
[    0.723244] ACPI: Thermal Zone [THRM] (67 C)
[    0.723362] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.724756] Linux agpgart interface v0.103
[    0.725826] loop: module loaded
[    0.725942] libphy: Fixed MDIO Bus: probed
[    0.725943] tun: Universal TUN/TAP device driver, 1.6
[    0.725964] PPP generic driver version 2.4.2
[    0.725993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.725994] ehci-pci: EHCI PCI platform driver
[    0.726089] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.726093] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.726103] ehci-pci 0000:00:1a.0: debug port 2
[    0.729992] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.730000] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf7a1c000
[    0.744074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.744123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.744125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.744126] usb usb1: Product: EHCI Host Controller
[    0.744127] usb usb1: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    0.744129] usb usb1: SerialNumber: 0000:00:1a.0
[    0.744805] hub 1-0:1.0: USB hub found
[    0.744809] hub 1-0:1.0: 2 ports detected
[    0.745063] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.745067] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.745077] ehci-pci 0000:00:1d.0: debug port 2
[    0.748975] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.748985] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[    0.764047] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.764075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.764076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.764078] usb usb2: Product: EHCI Host Controller
[    0.764079] usb usb2: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    0.764080] usb usb2: SerialNumber: 0000:00:1d.0
[    0.764259] hub 2-0:1.0: USB hub found
[    0.764263] hub 2-0:1.0: 2 ports detected
[    0.764389] ehci-platform: EHCI generic platform driver
[    0.764403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.764406] ohci-pci: OHCI PCI platform driver
[    0.764414] ohci-platform: OHCI generic platform driver
[    0.764419] uhci_hcd: USB Universal Host Controller Interface driver
[    0.764536] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.764540] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.765617] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.765621] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.765720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.765722] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765723] usb usb3: Product: xHCI Host Controller
[    0.765724] usb usb3: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    0.765724] usb usb3: SerialNumber: 0000:00:14.0
[    0.765824] hub 3-0:1.0: USB hub found
[    0.765839] hub 3-0:1.0: 14 ports detected
[    0.765945] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.765987] 
               Initialized Local Variables for Method [XPLD]:
[    0.765987]   Local0:         (ptrval) <Obj>           Integer 0000000000000001
[    0.765992] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.765993]   Arg0:           (ptrval) <Obj>           Integer 0000000000000001
[    0.765997] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766032] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS02._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766160] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.766198] 
               Initialized Local Variables for Method [XPLD]:
[    0.766198]   Local0:         (ptrval) <Obj>           Integer 0000000000000001
[    0.766202] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.766202]   Arg0:           (ptrval) <Obj>           Integer 0000000000000003
[    0.766206] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766240] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS04._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766309] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.766346] 
               Initialized Local Variables for Method [XPLD]:
[    0.766347]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.766350] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.766350]   Arg0:           (ptrval) <Obj>           Integer 0000000000000004
[    0.766354] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766388] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS05._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766456] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.766493] 
               Initialized Local Variables for Method [XPLD]:
[    0.766494]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.766497] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.766497]   Arg0:           (ptrval) <Obj>           Integer 0000000000000005
[    0.766501] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766535] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS06._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766600] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.766660] 
               Initialized Local Variables for Method [XPLD]:
[    0.766661]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.766664] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.766665]   Arg0:           (ptrval) <Obj>           Integer 0000000000000006
[    0.766668] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766726] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS07._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766817] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.766877] 
               Initialized Local Variables for Method [XPLD]:
[    0.766878]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.766881] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.766882]   Arg0:           (ptrval) <Obj>           Integer 0000000000000007
[    0.766885] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.766942] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS08._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767031] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.767092] 
               Initialized Local Variables for Method [XPLD]:
[    0.767092]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.767096] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.767096]   Arg0:           (ptrval) <Obj>           Integer 0000000000000008
[    0.767100] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767157] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS09._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767247] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.767308] 
               Initialized Local Variables for Method [XPLD]:
[    0.767308]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.767312] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.767312]   Arg0:           (ptrval) <Obj>           Integer 0000000000000009
[    0.767316] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767373] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS10._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767464] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.767524] 
               Initialized Local Variables for Method [XPLD]:
[    0.767524]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.767528] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.767528]   Arg0:           (ptrval) <Obj>           Integer 000000000000000A
[    0.767532] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767589] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS11._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767679] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.767740] 
               Initialized Local Variables for Method [XPLD]:
[    0.767740]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.767743] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.767744]   Arg0:           (ptrval) <Obj>           Integer 000000000000000B
[    0.767747] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767804] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS12._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.767893] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.767954] 
               Initialized Local Variables for Method [XPLD]:
[    0.767954]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.767957] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.767958]   Arg0:           (ptrval) <Obj>           Integer 000000000000000C
[    0.767961] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.768093] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS13._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.768254] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.768314] 
               Initialized Local Variables for Method [XPLD]:
[    0.768315]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.768318] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.768319]   Arg0:           (ptrval) <Obj>           Integer 000000000000000D
[    0.768322] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.768380] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS14._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.768556] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.768559] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.768586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.768587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.768588] usb usb4: Product: xHCI Host Controller
[    0.768589] usb usb4: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    0.768590] usb usb4: SerialNumber: 0000:00:14.0
[    0.768681] hub 4-0:1.0: USB hub found
[    0.768690] hub 4-0:1.0: 4 ports detected
[    0.768816] usb: port power management may be unreliable
[    0.768842] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.768904] 
               Initialized Local Variables for Method [XPLD]:
[    0.768904]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.768908] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.768908]   Arg0:           (ptrval) <Obj>           Integer 0000000000000011
[    0.768912] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.768970] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.SSP3._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.769060] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20170831/exoparg2-430)
[    0.769121] 
               Initialized Local Variables for Method [XPLD]:
[    0.769121]   Local0:         (ptrval) <Obj>           Integer 0000000000000000
[    0.769125] Initialized Arguments for Method [XPLD]:  (1 arguments defined for method invocation)
[    0.769125]   Arg0:           (ptrval) <Obj>           Integer 0000000000000012
[    0.769129] ACPI Error: Method parse/execution failed \_SB.XPLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.769186] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.SSP4._PLD, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[    0.769336] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.792692] ACPI: Battery Slot [BAT0] (battery present)
[    1.029265] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.029528] mousedev: PS/2 mouse device common for all mice
[    1.029901] rtc_cmos 00:01: RTC can wake from S4
[    1.030020] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.030043] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.030049] i2c /dev entries driver
[    1.030099] device-mapper: uevent: version 1.0.3
[    1.030157] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.030162] intel_pstate: Intel P-state driver initializing
[    1.030305] ledtrig-cpu: registered to indicate activity on CPUs
[    1.030626] NET: Registered protocol family 10
[    1.034387] Segment Routing with IPv6
[    1.034404] NET: Registered protocol family 17
[    1.034441] Key type dns_resolver registered
[    1.034641] RAS: Correctable Errors collector initialized.
[    1.034671] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    1.034714] microcode: Microcode Update Driver: v2.2.
[    1.034722] sched_clock: Marking stable (1034710732, 0)->(1015826493, 18884239)
[    1.034922] registered taskstats version 1
[    1.034930] Loading compiled-in X.509 certificates
[    1.036632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.036890] Loaded X.509 cert 'Build time autogenerated kernel key: d64bd6be71bc1eefa448ca9d60aedd81597cd233'
[    1.036904] zswap: loaded using pool lzo/zbud
[    1.039101] Key type big_key registered
[    1.039104] Key type trusted registered
[    1.040354] Key type encrypted registered
[    1.040356] AppArmor: AppArmor sha1 policy hashing enabled
[    1.040358] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.040374] evm: HMAC attrs: 0x1
[    1.040850]   Magic number: 14:259:305
[    1.040878] tty tty34: hash matches
[    1.040955] rtc_cmos 00:01: setting system clock to 2018-12-26 00:18:31 UTC (1545783511)
[    1.041005] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.041005] EDD information not available.
[    1.042921] Freeing unused kernel memory: 2408K
[    1.076072] Write protecting the kernel read-only data: 20480k
[    1.076482] Freeing unused kernel memory: 2008K
[    1.079881] Freeing unused kernel memory: 1916K
[    1.080023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.084707] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.084707] x86/mm: Checking user space page tables
[    1.089423] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.100023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.104015] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[    1.150288] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.162912] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.162936] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.180717] ahci 0000:00:1f.2: version 3.0
[    1.180929] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    1.180932] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.188067] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.189983] AVX2 version of gcm_enc/dec engaged.
[    1.189983] AES CTR mode by8 optimization enabled
[    1.200063] scsi host0: ahci
[    1.200303] scsi host1: ahci
[    1.200477] scsi host2: ahci
[    1.200657] scsi host3: ahci
[    1.200809] scsi host4: ahci
[    1.200846] ata1: DUMMY
[    1.200847] ata2: DUMMY
[    1.200850] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 29
[    1.200850] ata4: DUMMY
[    1.200852] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 29
[    1.201079] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 00:71:c2:33:ad:ab, XID 0c000800 IRQ 30
[    1.201082] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.201990] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.220510] [drm] Memory usable by graphics device = 2048M
[    1.220512] [drm] Replacing VGA console driver
[    1.221053] MXM: GUID detected in BIOS
[    1.221118] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    1.221343] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 
[    1.221372] ACPI Warning: \_SB.PCI0.P0P2.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    1.221563] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[    1.221565] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.P0P2.VGA_ handle
[    1.221612] Console: switching to colour dummy device 80x25
[    1.221824] nouveau 0000:01:00.0: NVIDIA GM108 (118010a2)
[    1.227789] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.227790] [drm] Driver supports precise vblank timestamp query.
[    1.230191] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.233323] nouveau 0000:01:00.0: bios: version 82.08.13.00.11
[    1.254004] usb 3-4: New USB device found, idVendor=25a7, idProduct=fa23
[    1.254007] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.254008] usb 3-4: Product: 2.4G Receiver
[    1.254009] usb 3-4: Manufacturer: Compx
[    1.317832] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.317844] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 612004 [ IBUS ]
[    1.317909] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.317910] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.318071] hub 1-1:1.0: USB hub found
[    1.318180] hub 1-1:1.0: 6 ports detected
[    1.324382] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[    1.336425] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.336427] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.336574] hub 2-1:1.0: USB hub found
[    1.336675] hub 2-1:1.0: 8 ports detected
[    1.360035] vga_switcheroo: enabled
[    1.360115] [TTM] Zone  kernel: Available graphics memory: 1973394 kiB
[    1.360116] [TTM] Initializing pool allocator
[    1.360119] [TTM] Initializing DMA pool allocator
[    1.360129] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.360130] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.360132] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.360134] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.360824] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    1.360832] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.361161] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.361469] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    1.361684] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input4
[    1.361863] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.365060] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    1.378995] fbcon: inteldrmfb (fb0) is primary device
[    1.380047] usb 3-10: new high-speed USB device number 3 using xhci_hcd
[    1.515531] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.515547] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.516537] ata3.00: ATA-10: ADATA SU800, Q0922FS, max UDMA/133
[    1.516539] ata3.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    1.517230] ata3.00: configured for UDMA/133
[    1.517421] scsi 2:0:0:0: Direct-Access     ATA      ADATA SU800      2FS  PQ: 0 ANSI: 5
[    1.517684] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.517753] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.517776] sd 2:0:0:0: [sda] Write Protect is off
[    1.517777] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.517811] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.518502]  sda: sda1 sda2 < sda5 >
[    1.518867] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.637031] usb 3-10: New USB device found, idVendor=04f2, idProduct=b3a3
[    1.637033] usb 3-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.637034] usb 3-10: Product: USB2.0 HD UVC WebCam
[    1.637035] usb 3-10: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.637036] usb 3-10: SerialNumber: 0x0001
[    1.645230] hidraw: raw HID events driver (C) Jiri Kosina
[    1.649809] usbcore: registered new interface driver usbhid
[    1.649810] usbhid: USB HID core driver
[    1.651418] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:25A7:FA23.0001/input/input6
[    1.708253] hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input0
[    1.708506] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:25A7:FA23.0002/input/input7
[    1.728069] tsc: Refined TSC clocksource calibration: 2593.992 MHz
[    1.728077] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25641074d3b, max_idle_ns: 440795244898 ns
[    1.768341] hid-generic 0003:25A7:FA23.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input1
[    1.856314] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.856316] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.856318] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.862457] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[    1.862459] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.869012] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.869014] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.869016] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.875157] ata5.00: configured for UDMA/133
[    1.875384] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    1.875743] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.875794] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.875796] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    1.875815] sd 4:0:0:0: [sdb] Write Protect is off
[    1.875817] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.875869] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.244068]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    2.244843] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.492493] Console: switching to colour frame buffer device 240x67
[    2.512332] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.673681] random: fast init done
[    2.695375] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695376] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695378] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695379] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695389] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695390] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695391] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695392] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695518] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695538] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695542] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.695543] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.752193] clocksource: Switched to clocksource tsc
[    3.100007] raid6: sse2x1   gen() 10878 MB/s
[    3.148006] raid6: sse2x1   xor()  7647 MB/s
[    3.196009] raid6: sse2x2   gen() 12814 MB/s
[    3.244005] raid6: sse2x2   xor()  8344 MB/s
[    3.292006] raid6: sse2x4   gen() 15229 MB/s
[    3.340008] raid6: sse2x4   xor()  9593 MB/s
[    3.388006] raid6: avx2x1   gen() 21247 MB/s
[    3.436006] raid6: avx2x1   xor() 14373 MB/s
[    3.484006] raid6: avx2x2   gen() 24283 MB/s
[    3.532005] raid6: avx2x2   xor() 14949 MB/s
[    3.580006] raid6: avx2x4   gen() 27940 MB/s
[    3.628005] raid6: avx2x4   xor() 17448 MB/s
[    3.628006] raid6: using algorithm avx2x4 gen() 27940 MB/s
[    3.628006] raid6: .... xor() 17448 MB/s, rmw enabled
[    3.628007] raid6: using avx2x2 recovery algorithm
[    3.628810] xor: automatically using best checksumming function   avx       
[    3.629575] async_tx: api initialized (async)
[    3.713630] Btrfs loaded, crc32c=crc32c-intel
[    3.898227] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.045849] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    4.068305] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.076893] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.096101] systemd[1]: Detected architecture x86-64.
[    4.097927] systemd[1]: Set hostname to <debug-PC>.
[    4.170603] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.170680] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.171334] systemd[1]: Created slice system-getty.slice.
[    4.171374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.171432] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.171472] systemd[1]: Listening on udev Kernel Socket.
[    4.171508] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.181418] vfs_monitor: loading out-of-tree module taints kernel.
[    4.181453] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[    4.181795] mp: /, major: 8, minor: 1
[    4.181797] partition count: 1, comm[340]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[    4.199863] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    4.263261] systemd-journald[347]: Received request to flush runtime journal from PID 1
[    4.271182] register_kretprobes 10 ok
[    4.296163] lp: driver loaded but no devices found
[    4.302060] ppdev: user-space parallel port driver
[    4.360874] Adding 4194300k swap on /swapfile.  Priority:-2 extents:9 across:4505596k SSFS
[    4.491875] EDAC ie31200: No ECC support
[    4.495639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.590987] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20170831/utaddress-247)
[    4.590994] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIX) (20170831/utaddress-247)
[    4.591000] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[    4.591005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.591008] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20170831/utaddress-247)
[    4.591013] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.591017] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.591018] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20170831/utaddress-247)
[    4.591023] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    4.591027] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.591032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.591033] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPXX) (20170831/utaddress-247)
[    4.591037] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    4.591041] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    4.591046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.591047] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.610650] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.615084] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.619970] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.619974] cfg80211: failed to load regulatory.db
[    4.638020] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    4.653978] Error: Driver 'pcspkr' is already registered, aborting...
[    4.694194] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.694196] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.694196] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.694197] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.694198] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.709465] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.739052] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.739056] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.739058] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.739059] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.739061] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.739063] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[    4.739064] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[    4.743584] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    4.743661] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    4.743727] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    4.743790] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    4.743852] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    4.749368] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.749441] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    4.779569] rtl8188ee: rtl8188ee: FW Power Save off (module option)
[    4.785297] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
[    4.808727] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.809022] rtlwifi: rtlwifi: wireless switch is on
[    4.844435] wl: module license 'MIXED/Proprietary' taints kernel.
[    4.844437] Disabling lock debugging due to kernel taint
[    4.922503] intel_rapl: Found RAPL domain package
[    4.922505] intel_rapl: Found RAPL domain core
[    4.922506] intel_rapl: Found RAPL domain uncore
[    4.922507] intel_rapl: Found RAPL domain dram
[    4.922510] intel_rapl: RAPL package 0 domain package locked by BIOS
[    4.922514] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    4.945011] media: Linux media interface: v0.10
[    4.979038] Linux video capture interface: v2.00
[    5.079542] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.103104] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3a3)
[    5.118416] uvcvideo 3-10:1.0: Entity type for entity Extension 4 was not initialized!
[    5.118419] uvcvideo 3-10:1.0: Entity type for entity Processing 2 was not initialized!
[    5.118421] uvcvideo 3-10:1.0: Entity type for entity Camera 1 was not initialized!
[    5.118655] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input16
[    5.118817] usbcore: registered new interface driver uvcvideo
[    5.118818] USB Video Class driver (1.1.1)
[    5.170635] r8169 0000:04:00.0 enp4s0: link down
[    5.170716] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.306615] rtl8188ee 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.354478] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.776693] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.824781] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.820096] wlp3s0: authenticate with d6:76:e7:eb:19:7f
[    6.830206] wlp3s0: send auth to d6:76:e7:eb:19:7f (try 1/3)
[    6.832708] wlp3s0: authenticated
[    6.836084] wlp3s0: associate with d6:76:e7:eb:19:7f (try 1/3)
[    6.861593] wlp3s0: RX AssocResp from d6:76:e7:eb:19:7f (capab=0x431 status=0 aid=4)
[    6.861900] wlp3s0: associated
[    6.907576] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   11.203751] NET: Registered protocol family 15
[   11.239228] Initializing XFRM netlink socket
[   17.179770] r8169 0000:04:00.0 enp4s0: link up
[   17.179778] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   17.232737] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[   18.152225] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[   21.261693] partition /media/debug/bakup [8, 22] added, comm[4814]: mount.ntfs
[   21.347802] partition /media/debug/work [8, 5] added, comm[4879]: mount.ntfs
[   21.532596] random: crng init done
[   21.618304] partition /media/debug/os [8, 17] added, comm[4886]: mount.ntfs
[   22.123620] partition /media/debug/work1 [8, 21] added, comm[4900]: mount.ntfs
[   25.763150] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   25.772372] JFS: nTxBlock = 8192, nTxLock = 65536
[   25.784954] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   25.804396] QNX4 filesystem 0.2.3 registered.
[  195.189109] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[  196.212409] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[  261.946518] usb 3-4: USB disconnect, device number 2
[  266.994060] usb 3-4: new full-speed USB device number 4 using xhci_hcd
[  267.144433] usb 3-4: New USB device found, idVendor=25a7, idProduct=fa23
[  267.144436] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  267.144437] usb 3-4: Product: 2.4G Receiver
[  267.144438] usb 3-4: Manufacturer: Compx
[  267.145961] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:25A7:FA23.0003/input/input17
[  267.202281] hid-generic 0003:25A7:FA23.0003: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input0
[  267.205084] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:25A7:FA23.0004/input/input18
[  267.262257] hid-generic 0003:25A7:FA23.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input1
[  278.181809] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[  279.205149] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[  361.174607] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[  362.197984] wlp3s0: AP d6:76:e7:eb:19:7f changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[  380.698072] r8169 0000:04:00.0: invalid short VPD tag 00 at offset 1
[  380.818206] Bluetooth: Core ver 2.22
[  380.818238] NET: Registered protocol family 31
[  380.818239] Bluetooth: HCI device and connection manager initialized
[  380.818243] Bluetooth: HCI socket layer initialized
[  380.818246] Bluetooth: L2CAP socket layer initialized
[  380.818252] Bluetooth: SCO socket layer initialized
