[    0.000000] Linux version 4.15.0-29deepin-generic (pbuilder@zs-PC) (gcc version 7.3.0 (Debian 7.3.0-19)) #31 SMP Fri Jul 27 07:12:08 UTC 2018 (Ubuntu 4.15.0-29deepin.31-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=b5a970b7-c98b-4f84-9db5-cea4b2556863 ro splash quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007cc9ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007cca0000-0x000000007d49ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d4a0000-0x000000009c8aefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c8af000-0x000000009ceaefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ceaf000-0x000000009cfaefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfaf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hasee computer QTJ5/Type2 - Board Product Name1, BIOS BR111 02/02/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00FF800000 mask 7FFF800000 write-protect
[    0.000000]   5 base 0100000000 mask 7F00000000 write-back
[    0.000000]   6 base 0200000000 mask 7F80000000 write-back
[    0.000000]   7 base 025F600000 mask 7FFFE00000 uncachable
[    0.000000]   8 base 025F800000 mask 7FFF800000 uncachable
[    0.000000]   9 base 0260000000 mask 7FE0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1a493f000, 0x1a493ffff] PGTABLE
[    0.000000] BRK [0x1a4940000, 0x1a4940fff] PGTABLE
[    0.000000] BRK [0x1a4941000, 0x1a4941fff] PGTABLE
[    0.000000] BRK [0x1a4942000, 0x1a4942fff] PGTABLE
[    0.000000] BRK [0x1a4943000, 0x1a4943fff] PGTABLE
[    0.000000] BRK [0x1a4944000, 0x1a4944fff] PGTABLE
[    0.000000] BRK [0x1a4945000, 0x1a4945fff] PGTABLE
[    0.000000] BRK [0x1a4946000, 0x1a4946fff] PGTABLE
[    0.000000] BRK [0x1a4947000, 0x1a4947fff] PGTABLE
[    0.000000] BRK [0x1a4948000, 0x1a4948fff] PGTABLE
[    0.000000] BRK [0x1a4949000, 0x1a4949fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3279f000-0x353c6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HASEE )
[    0.000000] ACPI: XSDT 0x000000009CFFE210 0000AC (v01 HASEE  PARADISE 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE6000 00E579 (v01 HASEE  PARADISE 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CFAB000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000009CFE5000 000176 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE4000 0007DE (v01 HASEE  PARADISE 00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE2000 000028 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE1000 000094 (v01 HASEE  PARADISE 00000000 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFDF000 000034 (v07 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFDE000 000034 (v01 HASEE  PARADISE 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD6000 000539 (v01 HASEE  PARADISE 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD5000 000AD8 (v01 HASEE  PARADISE 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD1000 003A95 (v01 HASEE  PARADISE 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCC000 003B58 (v01 HASEE  PARADISE 00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25f5d5000-0x25f5fffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007cc9ffff]
[    0.000000]   node   0: [mem 0x000000007d4a0000-0x000000009c8aefff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[    0.000000] On node 0 totalpages: 2078284
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9923 pages used for memmap
[    0.000000]   DMA32 zone: 635056 pages, LIFO batch:31
[    0.000000]   Normal zone: 22488 pages used for memmap
[    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7cca0000-0x7d49ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c8af000-0x9ceaefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ceaf000-0x9cfaefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfaf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2045788
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29deepin-generic root=UUID=b5a970b7-c98b-4f84-9db5-cea4b2556863 ro splash quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8041164K/8313136K available (12300K kernel code, 2470K rwdata, 4228K rodata, 2408K init, 2416K bss, 271972K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39092 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2494.043 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.08 BogoMIPS (lpj=9976172)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028009] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028027] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028217] CPU: Physical Processor ID: 0
[    0.028218] CPU: Processor Core ID: 0
[    0.028223] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028223] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028227] mce: CPU supports 9 MCE banks
[    0.028236] CPU0: Thermal monitoring enabled (TM1)
[    0.028249] process: using mwait in idle threads
[    0.028252] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.028253] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.028254] Spectre V2 : Mitigation: Full generic retpoline
[    0.028255] Speculative Store Bypass: Vulnerable
[    0.028775] Freeing SMP alternatives memory: 36K
[    0.032000] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.032000] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032000] ... version:                3
[    0.032000] ... bit width:              48
[    0.032000] ... generic registers:      4
[    0.032000] ... value mask:             0000ffffffffffff
[    0.032000] ... max period:             00007fffffffffff
[    0.032000] ... fixed-purpose events:   3
[    0.032000] ... event mask:             000000070000000f
[    0.032000] Hierarchical SRCU implementation.
[    0.032000] smp: Bringing up secondary CPUs ...
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1
[    0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032000]  #2 #3 #4 #5 #6 #7
[    0.032424] smp: Brought up 1 node, 8 CPUs
[    0.032424] smpboot: Max logical packages: 1
[    0.032424] smpboot: Total of 8 processors activated (39904.68 BogoMIPS)
[    0.036299] devtmpfs: initialized
[    0.036299] x86/mm: Memory block size: 128MB
[    0.040510] evm: security.selinux
[    0.040511] evm: security.SMACK64
[    0.040511] evm: security.SMACK64EXEC
[    0.040511] evm: security.SMACK64TRANSMUTE
[    0.040512] evm: security.SMACK64MMAP
[    0.040512] evm: security.apparmor
[    0.040513] evm: security.ima
[    0.040513] evm: security.capability
[    0.040526] PM: Registering ACPI NVS region [mem 0x9ceaf000-0x9cfaefff] (1048576 bytes)
[    0.040526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040526] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040526] pinctrl core: initialized pinctrl subsystem
[    0.040526] RTC time: 13:03:22, date: 09/04/18
[    0.040526] NET: Registered protocol family 16
[    0.040526] audit: initializing netlink subsys (disabled)
[    0.040526] audit: type=2000 audit(1536066202.040:1): state=initialized audit_enabled=0 res=1
[    0.040526] cpuidle: using governor ladder
[    0.040526] cpuidle: using governor menu
[    0.040526] Simple Boot Flag at 0x44 set to 0x1
[    0.040526] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040526] ACPI: bus type PCI registered
[    0.040526] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040526] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.040526] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.040526] PCI: Using configuration type 1 for base access
[    0.040526] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.041176] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.041176] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041178] ACPI: Added _OSI(Module Device)
[    0.041178] ACPI: Added _OSI(Processor Device)
[    0.041178] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041178] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041178] ACPI: Added _OSI(Linux-Dell-Video)
[    0.041178] ACPI: Executed 1 blocks of module-level executable AML code
[    0.050410] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.052177] ACPI: Dynamic OEM Table Load:
[    0.052185] ACPI: SSDT 0xFFFF9C161502D400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.052415] ACPI: Dynamic OEM Table Load:
[    0.052422] ACPI: SSDT 0xFFFF9C1615731000 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
[    0.052903] ACPI: Dynamic OEM Table Load:
[    0.052903] ACPI: SSDT 0xFFFF9C1615034600 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
[    0.052903] ACPI: EC: EC started
[    0.052903] ACPI: EC: interrupt blocked
[    0.059913] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.059915] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.059916] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.059917] ACPI: Interpreter enabled
[    0.059947] ACPI: (supports S0 S3 S4 S5)
[    0.059948] ACPI: Using IOAPIC for interrupt routing
[    0.059976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060218] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.100381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.100386] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.101005] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.101006] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.101631] PCI host bridge to bus 0000:00
[    0.101634] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.101635] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.101636] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.101638] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.101639] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.101647] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.101773] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.101810] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.101976] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.101987] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[    0.101993] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.101997] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.102143] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.102153] pci 0000:00:03.0: reg 0x10: [mem 0xd3710000-0xd3713fff 64bit]
[    0.102303] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.102323] pci 0000:00:14.0: reg 0x10: [mem 0xd3700000-0xd370ffff 64bit]
[    0.102381] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.102492] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.102513] pci 0000:00:16.0: reg 0x10: [mem 0xd3718000-0xd371800f 64bit]
[    0.102575] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.102689] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.102711] pci 0000:00:1a.0: reg 0x10: [mem 0xd371d000-0xd371d3ff]
[    0.102790] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.102902] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.102922] pci 0000:00:1b.0: reg 0x10: [mem 0xd3714000-0xd3717fff 64bit]
[    0.102989] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.103102] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.103172] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.103339] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.103409] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.103572] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.103643] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.103807] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.103877] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.104049] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.104071] pci 0000:00:1d.0: reg 0x10: [mem 0xd371c000-0xd371c3ff]
[    0.104152] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.104267] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.104477] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.104494] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.104501] pci 0000:00:1f.2: reg 0x14: [io  0x6094-0x6097]
[    0.104509] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.104516] pci 0000:00:1f.2: reg 0x1c: [io  0x6090-0x6093]
[    0.104523] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.104530] pci 0000:00:1f.2: reg 0x24: [mem 0xd371b000-0xd371b7ff]
[    0.104566] pci 0000:00:1f.2: PME# supported from D3hot
[    0.104672] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.104691] pci 0000:00:1f.3: reg 0x10: [mem 0xd3719000-0xd37190ff 64bit]
[    0.104710] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.104836] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[    0.104857] pci 0000:00:1f.6: reg 0x10: [mem 0xd371a000-0xd371afff 64bit]
[    0.105060] pci 0000:01:00.0: [10de:1347] type 00 class 0x030200
[    0.105087] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.105104] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.105121] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.105133] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    0.105144] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.105319] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.105321] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.105323] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.105326] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.105373] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.105440] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[    0.105470] pci 0000:08:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.105498] pci 0000:08:00.0: reg 0x18: [mem 0xd3600000-0xd3600fff 64bit]
[    0.105516] pci 0000:08:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref]
[    0.105616] pci 0000:08:00.0: supports D1 D2
[    0.105617] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120035] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.120039] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.120043] pci 0000:00:1c.1:   bridge window [mem 0xd3600000-0xd36fffff]
[    0.120047] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.120188] pci 0000:09:00.0: [10ec:5227] type 00 class 0xff0000
[    0.120236] pci 0000:09:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[    0.120481] pci 0000:09:00.0: supports D1 D2
[    0.120482] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.132039] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    0.132042] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.132046] pci 0000:00:1c.2:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.132051] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.132161] pci 0000:0f:00.0: [8086:08b3] type 00 class 0x028000
[    0.132248] pci 0000:0f:00.0: reg 0x10: [mem 0xd3500000-0xd3501fff 64bit]
[    0.132511] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
[    0.144054] pci 0000:00:1c.3: PCI bridge to [bus 0f]
[    0.144060] pci 0000:00:1c.3:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.145138] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.145205] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.145270] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.145336] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.145400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145530] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.145596] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.148003] ACPI: EC: interrupt unblocked
[    0.148003] ACPI: EC: event unblocked
[    0.148003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.148003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.148003] SCSI subsystem initialized
[    0.148010] libata version 3.00 loaded.
[    0.148020] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.148020] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.148020] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.148020] vgaarb: loaded
[    0.148027] ACPI: bus type USB registered
[    0.148038] usbcore: registered new interface driver usbfs
[    0.148045] usbcore: registered new interface driver hub
[    0.148064] usbcore: registered new device driver usb
[    0.148093] EDAC MC: Ver: 3.0.0
[    0.148097] PCI: Using ACPI for IRQ routing
[    0.155232] PCI: pci_cache_line_size set to 64 bytes
[    0.155312] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.155313] e820: reserve RAM buffer [mem 0x7cca0000-0x7fffffff]
[    0.155314] e820: reserve RAM buffer [mem 0x9c8af000-0x9fffffff]
[    0.155315] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.155316] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[    0.155394] NetLabel: Initializing
[    0.155395] NetLabel:  domain hash size = 128
[    0.155395] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.155408] NetLabel:  unlabeled traffic allowed by default
[    0.155420] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.155420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.158021] clocksource: Switched to clocksource hpet
[    0.165782] VFS: Disk quotas dquot_6.6.0
[    0.165797] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.165885] AppArmor: AppArmor Filesystem Enabled
[    0.165907] pnp: PnP ACPI init
[    0.166543] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.166545] system 00:00: [io  0xffff] has been reserved
[    0.166547] system 00:00: [io  0xffff] has been reserved
[    0.166548] system 00:00: [io  0xffff] has been reserved
[    0.166550] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.166551] system 00:00: [io  0x0454-0x0457] has been reserved
[    0.166553] system 00:00: [io  0x0800-0x08fe] has been reserved
[    0.166554] system 00:00: [io  0x0900-0x09fe] has been reserved
[    0.166556] system 00:00: [io  0x0a00-0x0afe] has been reserved
[    0.166557] system 00:00: [io  0x0b00-0x0bfe] has been reserved
[    0.166558] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.166560] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.166561] system 00:00: [io  0x0380-0x0387] has been reserved
[    0.166563] system 00:00: [io  0x06a0-0x06a7] has been reserved
[    0.166568] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166620] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.166623] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166644] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166697] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.166894] pnp 00:04: Plug and Play ACPI device, IDs ETD0429 PNP0f13 ETD0000 (active)
[    0.167134] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.167136] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.167138] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.167139] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.167141] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.167142] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.167144] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.167145] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.167147] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.167148] system 00:05: [mem 0x9fa21000-0x9fa21fff] has been reserved
[    0.167150] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.167153] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167651] pnp: PnP ACPI: found 6 devices
[    0.173627] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.173631] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.173644] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.173646] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[    0.173648] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[    0.173670] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[    0.173674] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.173676] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.173679] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    0.173681] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.173683] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.173686] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.173688] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.173691] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.173694] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.173698] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
[    0.173702] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.173707] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.173709] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.173714] pci 0000:00:1c.1:   bridge window [mem 0xd3600000-0xd36fffff]
[    0.173717] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.173723] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    0.173725] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.173730] pci 0000:00:1c.2:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.173733] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.173739] pci 0000:00:1c.3: PCI bridge to [bus 0f]
[    0.173743] pci 0000:00:1c.3:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.173751] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.173753] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.173754] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173755] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.173757] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.173758] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.173759] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.173761] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.173762] pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff]
[    0.173763] pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.173764] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.173766] pci_bus 0000:08: resource 1 [mem 0xd3600000-0xd36fffff]
[    0.173767] pci_bus 0000:08: resource 2 [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.173768] pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]
[    0.173770] pci_bus 0000:09: resource 1 [mem 0xd1000000-0xd1ffffff]
[    0.173771] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.173772] pci_bus 0000:0f: resource 1 [mem 0xd3500000-0xd35fffff]
[    0.173884] NET: Registered protocol family 2
[    0.174049] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.174141] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.174252] TCP: Hash tables configured (established 65536 bind 65536)
[    0.174281] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.174301] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.174350] NET: Registered protocol family 1
[    0.174362] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.212148] PCI: CLS 64 bytes, default 64
[    0.212184] Unpacking initramfs...
[    0.857570] Freeing initrd memory: 45216K
[    0.857593] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.857595] software IO TLB [mem 0x988af000-0x9c8af000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.857895] Scanning for low memory corruption every 60 seconds
[    0.858497] Initialise system trusted keyrings
[    0.858504] Key type blacklist registered
[    0.858536] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.859509] zbud: loaded
[    0.859947] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.860077] fuse init (API version 7.26)
[    0.861196] Key type asymmetric registered
[    0.861197] Asymmetric key parser 'x509' registered
[    0.861224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.861259] io scheduler noop registered
[    0.861260] io scheduler deadline registered
[    0.861294] io scheduler cfq registered (default)
[    0.862232] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.862250] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.862267] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[    0.862285] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[    0.862304] pcieport 0000:00:1c.3: Signaling PME with IRQ 28
[    0.862322] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.862353] pciehp 0000:00:1c.2:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.862418] intel_idle: MWAIT substates: 0x42120
[    0.862419] intel_idle: v0.4.1 model 0x3C
[    0.862683] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.863131] ACPI: AC Adapter [ACAD] (on-line)
[    0.863179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.863209] ACPI: Power Button [PWRB]
[    0.863246] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.863254] ACPI: Sleep Button [SLPB]
[    0.863282] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.863288] ACPI: Lid Switch [LID0]
[    0.863325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.863342] ACPI: Power Button [PWRF]
[    0.864568] [Firmware Bug]: Invalid critical threshold (0)
[    0.865845] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.866367] thermal LNXTHERM:00: registered as thermal_zone0
[    0.866368] ACPI: Thermal Zone [TZ01] (52 C)
[    0.866523] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.868582] Linux agpgart interface v0.103
[    0.870295] loop: module loaded
[    0.870430] libphy: Fixed MDIO Bus: probed
[    0.870431] tun: Universal TUN/TAP device driver, 1.6
[    0.870458] PPP generic driver version 2.4.2
[    0.870509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.870511] ehci-pci: EHCI PCI platform driver
[    0.870621] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.870627] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.870641] ehci-pci 0000:00:1a.0: debug port 2
[    0.874548] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.874557] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd371d000
[    0.878730] ACPI: Battery Slot [BAT0] (battery present)
[    0.888052] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.888084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.888085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888086] usb usb1: Product: EHCI Host Controller
[    0.888088] usb usb1: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    0.888089] usb usb1: SerialNumber: 0000:00:1a.0
[    0.888268] hub 1-0:1.0: USB hub found
[    0.888272] hub 1-0:1.0: 2 ports detected
[    0.888467] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.888471] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.888481] ehci-pci 0000:00:1d.0: debug port 2
[    0.892369] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.892403] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd371c000
[    0.908058] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.908083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.908085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908086] usb usb2: Product: EHCI Host Controller
[    0.908088] usb usb2: Manufacturer: Linux 4.15.0-29deepin-generic ehci_hcd
[    0.908089] usb usb2: SerialNumber: 0000:00:1d.0
[    0.908261] hub 2-0:1.0: USB hub found
[    0.908265] hub 2-0:1.0: 2 ports detected
[    0.908389] ehci-platform: EHCI generic platform driver
[    0.908398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.908401] ohci-pci: OHCI PCI platform driver
[    0.908408] ohci-platform: OHCI generic platform driver
[    0.908413] uhci_hcd: USB Universal Host Controller Interface driver
[    0.908525] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.908529] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.909611] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.909616] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.909725] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.909727] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.909728] usb usb3: Product: xHCI Host Controller
[    0.909729] usb usb3: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    0.909731] usb usb3: SerialNumber: 0000:00:14.0
[    0.909897] hub 3-0:1.0: USB hub found
[    0.909914] hub 3-0:1.0: 14 ports detected
[    0.912878] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.912882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.912915] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.912916] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.912918] usb usb4: Product: xHCI Host Controller
[    0.912919] usb usb4: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
[    0.912920] usb usb4: SerialNumber: 0000:00:14.0
[    0.913089] hub 4-0:1.0: USB hub found
[    0.913100] hub 4-0:1.0: 4 ports detected
[    0.913563] i8042: PNP: PS/2 Controller [PNP0303:PS2L,PNP0f13:PSE2] at 0x60,0x64 irq 1,12
[    0.915896] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.915899] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.916024] mousedev: PS/2 mouse device common for all mice
[    0.916353] rtc_cmos 00:02: RTC can wake from S4
[    0.916459] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.916484] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.916493] i2c /dev entries driver
[    0.916529] device-mapper: uevent: version 1.0.3
[    0.916582] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.916586] intel_pstate: Intel P-state driver initializing
[    0.916951] ledtrig-cpu: registered to indicate activity on CPUs
[    0.917380] NET: Registered protocol family 10
[    0.921190] Segment Routing with IPv6
[    0.921207] NET: Registered protocol family 17
[    0.921266] Key type dns_resolver registered
[    0.921682] RAS: Correctable Errors collector initialized.
[    0.921703] microcode: sig=0x306c3, pf=0x10, revision=0x17
[    0.921804] microcode: Microcode Update Driver: v2.2.
[    0.921811] sched_clock: Marking stable (921800595, 0)->(1006382026, -84581431)
[    0.922058] registered taskstats version 1
[    0.922064] Loading compiled-in X.509 certificates
[    0.924162] Loaded X.509 cert 'Build time autogenerated kernel key: d64bd6be71bc1eefa448ca9d60aedd81597cd233'
[    0.924178] zswap: loaded using pool lzo/zbud
[    0.926836] Key type big_key registered
[    0.926839] Key type trusted registered
[    0.928172] Key type encrypted registered
[    0.928173] AppArmor: AppArmor sha1 policy hashing enabled
[    0.928176] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.928192] evm: HMAC attrs: 0x1
[    0.928820]   Magic number: 2:210:78
[    0.928930] rtc_cmos 00:02: setting system clock to 2018-09-04 13:03:23 UTC (1536066203)
[    0.928985] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.928986] EDD information not available.
[    0.931096] Freeing unused kernel memory: 2408K
[    0.964059] Write protecting the kernel read-only data: 20480k
[    0.964503] Freeing unused kernel memory: 2008K
[    0.967706] Freeing unused kernel memory: 1916K
[    0.972113] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.972113] x86/mm: Checking user space page tables
[    0.976398] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.987795] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.028869] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    1.028872] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    1.028874] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    1.028876] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
[    1.036027] r8168: loading out-of-tree module taints kernel.
[    1.036181] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    1.036596] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded
[    1.038473] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.038494] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.040488] ahci 0000:00:1f.2: version 3.0
[    1.040630] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.040652] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    1.040654] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst 
[    1.050973] AVX2 version of gcm_enc/dec engaged.
[    1.050974] AES CTR mode by8 optimization enabled
[    1.051428] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    1.051434] r8168  Copyright (C) 2018  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    1.056044] scsi host0: ahci
[    1.056315] scsi host1: ahci
[    1.056408] scsi host2: ahci
[    1.056482] scsi host3: ahci
[    1.060472] r8168 0000:08:00.0 enp8s0: renamed from eth0
[    1.061133] scsi host4: ahci
[    1.061169] ata1: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b100 irq 32
[    1.061170] ata2: DUMMY
[    1.061170] ata3: DUMMY
[    1.061171] ata4: DUMMY
[    1.061173] ata5: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b300 irq 32
[    1.089843] [drm] Memory usable by graphics device = 2048M
[    1.089845] [drm] Replacing VGA console driver
[    1.090979] Console: switching to colour dummy device 80x25
[    1.097150] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.097151] [drm] Driver supports precise vblank timestamp query.
[    1.099248] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.116421] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.116550] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.117111] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.117118] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.117130] No Local Variables are initialized for Method [_BCL]
[    1.117131] No Arguments are initialized for method [_BCL]
[    1.117133] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.DD02._BCL, AE_NOT_FOUND (20170831/psparse-550)
[    1.117300] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input7
[    1.118344] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.118451] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.156564] fbcon: inteldrmfb (fb0) is primary device
[    1.224072] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.244071] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.248070] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    1.375082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.376023] ata1.00: ATA-9: ADATA SP550, O0803B5, max UDMA/133
[    1.376024] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.376802] ata1.00: configured for UDMA/133
[    1.376999] scsi 0:0:0:0: Direct-Access     ATA      ADATA SP550      3B5  PQ: 0 ANSI: 5
[    1.377277] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.377283] sd 0:0:0:0: [sda] Write Protect is off
[    1.377284] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.377284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.377293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.377658]  sda: sda1
[    1.377862] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.380440] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.380442] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.380689] hub 1-1:1.0: USB hub found
[    1.380769] hub 1-1:1.0: 6 ports detected
[    1.400612] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.400614] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.400753] usb 3-2: New USB device found, idVendor=06f3, idProduct=0309
[    1.400755] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.400819] hub 2-1:1.0: USB hub found
[    1.400899] hub 2-1:1.0: 8 ports detected
[    1.402251] random: fast init done
[    1.402533] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402540] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402551] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402554] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402559] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402562] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402592] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402600] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.402602] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.405317] hidraw: raw HID events driver (C) Jiri Kosina
[    1.418723] usbcore: registered new interface driver usbhid
[    1.418724] usbhid: USB HID core driver
[    1.420329] input: HID 06f3:0309 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:06F3:0309.0001/input/input9
[    1.480157] hid-generic 0003:06F3:0309.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 06f3:0309] on usb-0000:00:14.0-2/input0
[    1.480375] input: HID 06f3:0309 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:06F3:0309.0002/input/input10
[    1.528079] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    1.540155] hid-generic 0003:06F3:0309.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 06f3:0309] on usb-0000:00:14.0-2/input1
[    1.612798] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f16)
[    1.626839] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
[    1.640883] psmouse serio1: elantech: Elan sample query result 10, 4a, 75
[    1.690320] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.709066] usb 3-4: New USB device found, idVendor=04f2, idProduct=b506
[    1.709067] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.709068] usb 3-4: Product: USB HD Webcam
[    1.709070] usb 3-4: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.709071] usb 3-4: SerialNumber: 0x0001
[    1.713125] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    1.716883] ata5.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[    1.716884] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.755887] ata5.00: configured for UDMA/133
[    1.756049] scsi 4:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[    1.756267] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.756388] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.756389] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    1.756422] sd 4:0:0:0: [sdb] Write Protect is off
[    1.756424] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.756487] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.782288]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.782753] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.840102] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[    1.884087] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[    1.884091] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns
[    1.990513] usb 3-6: New USB device found, idVendor=1bcf, idProduct=0823
[    1.990526] usb 3-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.990527] usb 3-6: Product: USB Optical Mouse
[    1.992156] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1BCF:0823.0003/input/input11
[    2.052290] hid-generic 0003:1BCF:0823.0003: input,hidraw2: USB HID v1.00 Keyboard [USB Optical Mouse] on usb-0000:00:14.0-6/input0
[    2.267382] Console: switching to colour frame buffer device 240x67
[    2.287343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.908312] clocksource: Switched to clocksource tsc
[   27.612160] usbhid 3-6:1.1: can't add hid device: -110
[   27.612203] usbhid: probe of 3-6:1.1 failed with error -110
[   27.680094] raid6: sse2x1   gen() 11736 MB/s
[   27.728092] raid6: sse2x1   xor()  8344 MB/s
[   27.740102] usb 3-7: new full-speed USB device number 5 using xhci_hcd
[   27.776096] raid6: sse2x2   gen() 13951 MB/s
[   27.824095] raid6: sse2x2   xor()  9147 MB/s
[   27.872092] raid6: sse2x4   gen() 16585 MB/s
[   27.897127] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[   27.897128] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   27.920094] raid6: sse2x4   xor() 10438 MB/s
[   27.968095] raid6: avx2x1   gen() 23002 MB/s
[   28.016093] raid6: avx2x1   xor() 15689 MB/s
[   28.064093] raid6: avx2x2   gen() 26615 MB/s
[   28.112096] raid6: avx2x2   xor() 16571 MB/s
[   28.160093] raid6: avx2x4   gen() 30495 MB/s
[   28.208092] raid6: avx2x4   xor() 19385 MB/s
[   28.208092] raid6: using algorithm avx2x4 gen() 30495 MB/s
[   28.208093] raid6: .... xor() 19385 MB/s, rmw enabled
[   28.208094] raid6: using avx2x2 recovery algorithm
[   28.208964] xor: automatically using best checksumming function   avx       
[   28.209679] async_tx: api initialized (async)
[   28.298761] Btrfs loaded, crc32c=crc32c-intel
[   28.604699] PM: Starting manual resume from disk
[   28.605121] PM: Image not found (code -22)
[   28.808385] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   30.241671] random: crng init done
[   30.443986] ip_tables: (C) 2000-2006 Netfilter Core Team
[   30.529478] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   30.548287] systemd[1]: Detected architecture x86-64.
[   30.560326] systemd[1]: Set hostname to <chaoba-PC>.
[   32.308069] systemd[1]: Created slice system-getty.slice.
[   32.308226] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   32.308283] systemd[1]: Listening on LVM2 poll daemon socket.
[   32.308326] systemd[1]: Listening on fsck to fsckd communication Socket.
[   32.308372] systemd[1]: Listening on Journal Socket (/dev/log).
[   32.308594] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   32.308791] systemd[1]: Created slice User and Session Slice.
[   32.709492] mp: /, major: 8, minor: 18
[   32.709494] partition count: 1, comm[395]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[   32.769216] register_kretprobes 10 ok
[   33.154043] lp: driver loaded but no devices found
[   33.169826] ppdev: user-space parallel port driver
[   33.175663] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[   33.232238] systemd-journald[403]: Received request to flush runtime journal from PID 1
[   35.137809] input: PC Speaker as /devices/platform/pcspkr/input/input12
[   35.704383] EDAC ie31200: No ECC support
[   35.824210] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[   35.824216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   35.824219] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247)
[   35.824222] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   35.824225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   35.824226] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247)
[   35.824228] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247)
[   35.824231] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   35.824233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   35.824234] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247)
[   35.824236] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247)
[   35.824239] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170831/utaddress-247)
[   35.824242] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   35.824244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   35.824244] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   35.876475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.038452] Error: Driver 'pcspkr' is already registered, aborting...
[   36.045231] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   36.526421] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   36.528283] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   36.688542] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   36.688544] cfg80211: failed to load regulatory.db
[   36.711071] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   36.711071] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   36.711072] RAPL PMU: hw unit of domain package 2^-14 Joules
[   36.711072] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   36.711073] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   36.745528] Intel(R) Wireless WiFi driver for Linux
[   36.745529] Copyright(c) 2003- 2015 Intel Corporation
[   36.884921] iwlwifi 0000:0f:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[   37.104639] iwlwifi 0000:0f:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[   37.123326] iwlwifi 0000:0f:00.0: base HW address: e4:02:9b:7a:04:7c
[   37.359079] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   37.446611] wl: module license 'MIXED/Proprietary' taints kernel.
[   37.446612] Disabling lock debugging due to kernel taint
[   37.601826] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   37.790250] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   37.790284] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   37.790313] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   37.790343] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   37.790372] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   37.791897] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   37.791899] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   37.791900] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   37.791901] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   37.791902] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   37.791903] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   37.791904] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   37.801807] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[   37.801838] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[   38.369974] intel_rapl: Found RAPL domain package
[   38.369976] intel_rapl: Found RAPL domain core
[   38.369976] intel_rapl: Found RAPL domain uncore
[   38.369977] intel_rapl: Found RAPL domain dram
[   38.369979] intel_rapl: RAPL package 0 domain package locked by BIOS
[   38.576880] iwlwifi 0000:0f:00.0 wlp15s0: renamed from wlan0
[   40.763341] Adding 11534332k swap on /dev/sdb1.  Priority:-2 extents:1 across:11534332k FS
[   43.523547] media: Linux media interface: v0.10
[   43.714629] Bluetooth: Core ver 2.22
[   43.714644] NET: Registered protocol family 31
[   43.714645] Bluetooth: HCI device and connection manager initialized
[   43.714647] Bluetooth: HCI socket layer initialized
[   43.714648] Bluetooth: L2CAP socket layer initialized
[   43.714652] Bluetooth: SCO socket layer initialized
[   44.078911] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[   44.078928] partition /home [8, 19] added, comm[950]: mount
[   44.370301] Linux video capture interface: v2.00
[   45.151687] uvcvideo: Found UVC 1.00 device USB HD Webcam (04f2:b506)
[   45.156080] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!
[   45.156082] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!
[   45.156084] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
[   45.156152] input: USB HD Webcam: USB HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input20
[   45.156217] usbcore: registered new interface driver uvcvideo
[   45.156218] USB Video Class driver (1.1.1)
[   45.402808] usbcore: registered new interface driver btusb
[   45.416090] Bluetooth: hci0: read Intel version: 3707100100012d0d27
[   45.416092] Bluetooth: hci0: Intel device is already patched. patch num: 27
[   51.731542] bbswitch: version 0.8
[   51.731547] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   51.731552] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   51.731564] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[   51.731642] bbswitch: detected an Optimus _DSM function
[   51.731652] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   51.731696] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   51.732246] bbswitch: disabling discrete graphics
[   53.695029] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   53.695030] Bluetooth: BNEP filters: protocol multicast
[   53.695032] Bluetooth: BNEP socket layer initialized
[   57.999357] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[   57.999542] enp8s0: 0xffffb29b0000e000, 54:ab:3a:7f:8a:6c, IRQ 30
[   58.050188] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[   58.052699] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[   58.201217] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[   58.362187] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[   58.437814] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[   60.106451] r8168: enp8s0: link up
[   60.106476] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[   61.593995] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[   62.029202] NET: Registered protocol family 24
[   65.018874] wlp15s0: authenticate with fc:fc:00:00:00:e0
[   65.021442] wlp15s0: send auth to fc:fc:00:00:00:e0 (try 1/3)
[   65.022219] wlp15s0: authenticated
[   65.024087] wlp15s0: associate with fc:fc:00:00:00:e0 (try 1/3)
[   65.025013] wlp15s0: RX AssocResp from fc:fc:00:00:00:e0 (capab=0x831 status=0 aid=4)
[   65.026472] wlp15s0: associated
[   65.357822] IPv6: ADDRCONF(NETDEV_CHANGE): wlp15s0: link becomes ready
[   70.147538] NET: Registered protocol family 15
[   70.820955] vboxdrv: Found 8 processor cores
[   70.840207] vboxdrv: TSC mode is Invariant, tentative frequency 2494222984 Hz
[   70.840208] vboxdrv: Successfully loaded version 5.2.12_Debian (interface 0x00290001)
[   71.372881] VBoxNetFlt: Successfully started.
[   71.415299] /dev/vmmon[5140]: Module vmmon: registered with major=10 minor=165
[   71.415301] /dev/vmmon[5140]: Using tsc_khz as TSC frequency: 2494224
[   71.415302] /dev/vmmon[5140]: Module vmmon: initialized
[   72.236218] VBoxNetAdp: Successfully started.
[   72.779101] Guest personality initialized and is inactive
[   72.779138] VMCI host device registered (name=vmci, major=10, minor=52)
[   72.779138] Initialized host personality
[   72.925678] VBoxPciLinuxInit
[   72.947872] Initializing XFRM netlink socket
[   73.116036] vboxpci: IOMMU not found (not registered)
[   74.077087] NET: Registered protocol family 40
[   82.990218] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[   82.990222] /dev/vmnet: hub 0 does not exist, allocating memory.
[   82.990239] /dev/vmnet: port on hub 0 successfully opened
[   82.990247] bridge-enp8s0: up
[   82.990251] bridge-enp8s0: attached
[   82.990298] bridge-enp8s0: disabling the bridge on dev down
[   82.990327] bridge-enp8s0: down
[   82.990331] bridge-enp8s0: detached
[   82.990355] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[   82.990358] /dev/vmnet: hub 0 does not exist, allocating memory.
[   82.990374] /dev/vmnet: port on hub 0 successfully opened
[   82.990380] bridge-wlp15s0: device is wireless, enabling SMAC
[   82.990381] bridge-wlp15s0: up
[   82.990383] bridge-wlp15s0: attached
[   84.840050] /dev/vmnet: open called by PID 5404 (vmnet-netifup)
[   84.840055] /dev/vmnet: hub 1 does not exist, allocating memory.
[   84.840071] /dev/vmnet: port on hub 1 successfully opened
[   85.606163] /dev/vmnet: open called by PID 5416 (vmnet-dhcpd)
[   85.606172] /dev/vmnet: port on hub 1 successfully opened
[   86.123670] /dev/vmnet: open called by PID 5430 (vmnet-natd)
[   86.123675] /dev/vmnet: hub 8 does not exist, allocating memory.
[   86.123687] /dev/vmnet: port on hub 8 successfully opened
[   86.425931] userif-4: sent link down event.
[   86.425933] userif-4: sent link up event.
[   86.426966] /dev/vmnet: open called by PID 5435 (vmnet-netifup)
[   86.426973] /dev/vmnet: port on hub 8 successfully opened
[   86.916369] /dev/vmnet: open called by PID 5446 (vmnet-dhcpd)
[   86.916378] /dev/vmnet: port on hub 8 successfully opened
[  104.804419] Bluetooth: RFCOMM TTY layer initialized
[  104.804422] Bluetooth: RFCOMM socket layer initialized
[  104.804425] Bluetooth: RFCOMM ver 1.11
[  107.575033] aufs 4.15-20180219
[  111.264122] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  111.271928] Bridge firewalling registered
[  111.563507] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  114.041969] Netfilter messages via NETLINK v0.30.
[  114.049938] ctnetlink v0.93: registering with nfnetlink.
[  114.360552] userif-4: sent link down event.
[  114.360554] userif-4: sent link up event.
[  114.558913] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[  119.538269] partition /var/lib/docker/overlay2/opaque-bug-check227349445/merged [0, 53] added, comm[5872]: dockerd
[  119.538464] sys_umount: /var/lib/docker/overlay2/opaque-bug-check227349445/merged, 0, 53
[  119.572186] partition /var/lib/docker/overlay2/opaque-bug-check227349445/merged [0, 53] umounted
[  125.756136] wlp15s0: deauthenticating from fc:fc:00:00:00:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
[  125.761332] bridge-wlp15s0: disabling the bridge on dev down
[  125.761359] bridge-wlp15s0: down
[  125.761369] bridge-wlp15s0: detached
[  125.761398] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[  125.761404] /dev/vmnet: hub 0 does not exist, allocating memory.
[  125.761431] /dev/vmnet: port on hub 0 successfully opened
[  125.761440] bridge-enp8s0: up
[  125.761442] bridge-enp8s0: attached
[  125.766026] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[  125.956221] userif-4: sent link down event.
[  125.956222] userif-4: sent link up event.
[  126.192353] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  126.192387] partition /media/chaoba/ssd [8, 1] added, comm[6224]: pool
[  130.457887] partition /media/chaoba/_dde_data [8, 20] added, comm[6235]: mount.ntfs
[  158.371655] usb 3-6: USB disconnect, device number 4
[  160.042599] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[  160.196831] usb 3-6: New USB device found, idVendor=1bcf, idProduct=0823
[  160.196833] usb 3-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  160.196834] usb 3-6: Product: USB Optical Mouse
[  160.198367] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1BCF:0823.0004/input/input21
[  160.254910] hid-generic 0003:1BCF:0823.0004: input,hidraw2: USB HID v1.00 Keyboard [USB Optical Mouse] on usb-0000:00:14.0-6/input0
[  160.256714] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:1BCF:0823.0005/input/input22
[  160.314881] hid-generic 0003:1BCF:0823.0005: input,hiddev0,hidraw3: USB HID v1.00 Mouse [USB Optical Mouse] on usb-0000:00:14.0-6/input1
[  470.789278] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[  785.979972] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 1100.976574] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 1143.894538] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 1146.883805] wlp15s0: authenticate with fc:fc:00:00:00:e0
[ 1146.885819] wlp15s0: send auth to fc:fc:00:00:00:e0 (try 1/3)
[ 1146.886785] wlp15s0: authenticated
[ 1146.894690] wlp15s0: associate with fc:fc:00:00:00:e0 (try 1/3)
[ 1146.895651] wlp15s0: RX AssocResp from fc:fc:00:00:00:e0 (capab=0x831 status=0 aid=1)
[ 1146.898072] wlp15s0: associated
[ 1147.099909] IPv6: ADDRCONF(NETDEV_CHANGE): wlp15s0: link becomes ready
[ 1147.144468] bridge-enp8s0: disabling the bridge on dev down
[ 1147.144495] bridge-enp8s0: down
[ 1147.144501] bridge-enp8s0: detached
[ 1147.144526] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[ 1147.144531] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1147.144544] /dev/vmnet: port on hub 0 successfully opened
[ 1147.144549] bridge-wlp15s0: device is wireless, enabling SMAC
[ 1147.144550] bridge-wlp15s0: up
[ 1147.144552] bridge-wlp15s0: attached
[ 1147.300002] userif-4: sent link down event.
[ 1147.300003] userif-4: sent link up event.
[ 1242.890819] wlp15s0: deauthenticating from fc:fc:00:00:00:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1242.978808] bridge-wlp15s0: disabling the bridge on dev down
[ 1242.978840] bridge-wlp15s0: down
[ 1242.978851] bridge-wlp15s0: detached
[ 1242.978881] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[ 1242.978887] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1242.978911] /dev/vmnet: port on hub 0 successfully opened
[ 1242.978919] bridge-enp8s0: up
[ 1242.978936] bridge-enp8s0: attached
[ 1242.984608] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 1243.178833] userif-4: sent link down event.
[ 1243.178835] userif-4: sent link up event.
[ 1590.008164] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 1904.965603] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 2219.968516] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 2534.975824] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 2849.981107] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3164.983662] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3433.840744] bridge-enp8s0: disabling the bridge on dev down
[ 3433.840831] bridge-enp8s0: down
[ 3433.841520] bridge-enp8s0: detached
[ 3434.039690] userif-4: sent link down event.
[ 3434.039692] userif-4: sent link up event.
[ 3438.958356] PM: suspend entry (deep)
[ 3438.958357] PM: Syncing filesystems ... done.
[ 3440.341390] bbswitch: enabling discrete graphics
[ 3440.571202] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 3440.572994] OOM killer disabled.
[ 3440.572995] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3440.574245] Suspending console(s) (use no_console_suspend to debug)
[ 3440.587065] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3440.587751] sd 0:0:0:0: [sda] Stopping disk
[ 3440.591074] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 3440.678555] sd 4:0:0:0: [sdb] Stopping disk
[ 3450.823272] usbhid 3-6:1.0: suspend error -5
[ 3450.883586] ACPI: EC: interrupt blocked
[ 3450.923379] ACPI: Preparing to enter system sleep state S3
[ 3450.933571] ACPI: EC: event blocked
[ 3450.933571] ACPI: EC: EC stopped
[ 3450.933571] PM: Saving platform NVS memory
[ 3450.933582] Disabling non-boot CPUs ...
[ 3450.948446] smpboot: CPU 1 is now offline
[ 3450.972421] smpboot: CPU 2 is now offline
[ 3450.996393] smpboot: CPU 3 is now offline
[ 3451.020428] smpboot: CPU 4 is now offline
[ 3451.044350] smpboot: CPU 5 is now offline
[ 3451.068355] smpboot: CPU 6 is now offline
[ 3451.092333] smpboot: CPU 7 is now offline
[ 3451.094910] ACPI: Low-level resume complete
[ 3451.094969] ACPI: EC: EC started
[ 3451.094969] PM: Restoring platform NVS memory
[ 3451.095320] Enabling non-boot CPUs ...
[ 3451.095365] x86: Booting SMP configuration:
[ 3451.095366] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3451.095908]  cache: parent cpu1 should not be sleeping
[ 3451.096088] CPU1 is up
[ 3451.096128] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3451.096701]  cache: parent cpu2 should not be sleeping
[ 3451.096959] CPU2 is up
[ 3451.096983] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3451.097441]  cache: parent cpu3 should not be sleeping
[ 3451.097648] CPU3 is up
[ 3451.097671] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 3451.098232]  cache: parent cpu4 should not be sleeping
[ 3451.103327] CPU4 is up
[ 3451.103401] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 3451.103865]  cache: parent cpu5 should not be sleeping
[ 3451.104102] CPU5 is up
[ 3451.104126] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 3451.104701]  cache: parent cpu6 should not be sleeping
[ 3451.105047] CPU6 is up
[ 3451.105088] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 3451.105554]  cache: parent cpu7 should not be sleeping
[ 3451.105831] CPU7 is up
[ 3451.112807] ACPI: Waking up from system sleep state S3
[ 3451.125157] ACPI: EC: interrupt unblocked
[ 3451.166238] ACPI: button: The lid device is not compliant to SW_LID.
[ 3451.166881] ACPI: EC: event unblocked
[ 3451.167789] sd 0:0:0:0: [sda] Starting disk
[ 3451.167805] sd 4:0:0:0: [sdb] Starting disk
[ 3451.400872] usb 3-7: reset full-speed USB device number 5 using xhci_hcd
[ 3451.491560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3451.493191] ata1.00: configured for UDMA/133
[ 3451.624663] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445208007435565292 new 18445208005909824533 attempts 1
[ 3451.676852] usb 3-6: reset full-speed USB device number 6 using xhci_hcd
[ 3451.952848] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[ 3452.130885] OOM killer enabled.
[ 3452.130886] Restarting tasks ... done.
[ 3452.146343] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[ 3452.146419] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[ 3452.150348] bbswitch: disabling discrete graphics
[ 3452.212040] PM: suspend exit
[ 3452.316382] Bluetooth: hci0: Intel firmware patch completed and activated
[ 3453.472717] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3453.538204] ata5.00: configured for UDMA/133
[ 3453.626979] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 3453.627193] enp8s0: 0xffffb29b0000e000, 54:ab:3a:7f:8a:6c, IRQ 30
[ 3453.677566] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 3453.678577] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3453.823765] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3453.981344] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3454.057114] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 3455.734985] r8168: enp8s0: link up
[ 3455.735012] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[ 3455.735166] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[ 3455.735180] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 3455.735193] /dev/vmnet: port on hub 0 successfully opened
[ 3455.735200] bridge-enp8s0: up
[ 3455.735204] bridge-enp8s0: attached
[ 3455.756760] do_IRQ: 5.34 No irq handler for vector
[ 3455.935110] userif-4: sent link down event.
[ 3455.935111] userif-4: sent link up event.
[ 3798.997132] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 4114.043723] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 4428.996204] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 4628.211994] r8168: enp8s0: link down
[ 4628.236919] bridge-enp8s0: disabling the bridge on dev down
[ 4628.236990] bridge-enp8s0: down
[ 4628.237006] bridge-enp8s0: detached
[ 4628.437140] userif-4: sent link down event.
[ 4628.437142] userif-4: sent link up event.
[ 4631.330388] r8168: enp8s0: link up
[ 4631.330523] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[ 4631.330531] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 4631.330554] /dev/vmnet: port on hub 0 successfully opened
[ 4631.330564] bridge-enp8s0: up
[ 4631.330567] bridge-enp8s0: attached
[ 4631.348135] do_IRQ: 5.34 No irq handler for vector
[ 4631.530463] userif-4: sent link down event.
[ 4631.530465] userif-4: sent link up event.
[ 4650.013923] IPv6: ADDRCONF(NETDEV_UP): wlp15s0: link is not ready
[ 4653.117303] wlp15s0: authenticate with fc:fc:00:00:00:e0
[ 4653.119446] wlp15s0: send auth to fc:fc:00:00:00:e0 (try 1/3)
[ 4653.120181] wlp15s0: authenticated
[ 4653.120298] wlp15s0: associate with fc:fc:00:00:00:e0 (try 1/3)
[ 4653.121174] wlp15s0: RX AssocResp from fc:fc:00:00:00:e0 (capab=0x831 status=0 aid=1)
[ 4653.122801] wlp15s0: associated
[ 4653.323890] IPv6: ADDRCONF(NETDEV_CHANGE): wlp15s0: link becomes ready
[ 4653.369892] bridge-enp8s0: disabling the bridge on dev down
[ 4653.369918] bridge-enp8s0: down
[ 4653.369923] bridge-enp8s0: detached
[ 4653.369944] /dev/vmnet: open called by PID 5390 (vmnet-bridge)
[ 4653.369948] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 4653.369961] /dev/vmnet: port on hub 0 successfully opened
[ 4653.369965] bridge-wlp15s0: device is wireless, enabling SMAC
[ 4653.369966] bridge-wlp15s0: up
[ 4653.369969] bridge-wlp15s0: attached
[ 4653.524080] userif-4: sent link down event.
[ 4653.524082] userif-4: sent link up event.
[ 4653.747869] userif-4: sent link down event.
[ 4653.747871] userif-4: sent link up event.
[ 4947.561017] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 5152.831567] userif-4: sent link down event.
[ 5152.831569] userif-4: sent link up event.
[ 5173.909920] enp8s0: 0xffffb29b0000e000, 54:ab:3a:7f:8a:6c, IRQ 30
[ 5173.960452] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 5176.009321] r8168: enp8s0: link up
[ 5176.009407] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[ 5176.031051] do_IRQ: 5.34 No irq handler for vector
[ 5176.209517] userif-4: sent link down event.
[ 5176.209519] userif-4: sent link up event.
[ 5386.985066] r8168 0000:08:00.0: invalid short VPD tag 00 at offset 1
