[    0.000000] Linux version 4.15.0-21deepin-generic (pbuilder@gs-PC) (gcc version 7.2.0 (Debian 7.2.0-20)) #21 SMP Mon May 21 05:20:09 UTC 2018 (Ubuntu 4.15.0-21deepin.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=7f5b4364-6f8c-47eb-98aa-2bf9ed71e4ac ro splash quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000070dfbfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070dfc000-0x0000000070dfcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000070dfd000-0x0000000070dfdfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000070dfe000-0x000000007a763fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a764000-0x000000007a815fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007a816000-0x000000007be48fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007be49000-0x000000007be4afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007be4b000-0x000000007be4bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007be4c000-0x000000007be99fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007be9a000-0x000000007befefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007beff000-0x000000007befffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bf00000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by Lenovo
[    0.000000] efi:  SMBIOS=0x7ba44000  SMBIOS 3.0=0x7ba42000  ACPI=0x7befe000  ACPI 2.0=0x7befe014  ESRT=0x7aea5000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 20H1001WCD/20H1001WCD, BIOS R0DET33W (1.09 ) 10/13/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7bf00 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007aea5000 to 0x000000007aea5060.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x111f3e000, 0x111f3efff] PGTABLE
[    0.000000] BRK [0x111f3f000, 0x111f3ffff] PGTABLE
[    0.000000] BRK [0x111f40000, 0x111f40fff] PGTABLE
[    0.000000] BRK [0x111f41000, 0x111f41fff] PGTABLE
[    0.000000] BRK [0x111f42000, 0x111f42fff] PGTABLE
[    0.000000] BRK [0x111f43000, 0x111f43fff] PGTABLE
[    0.000000] BRK [0x111f44000, 0x111f44fff] PGTABLE
[    0.000000] BRK [0x111f45000, 0x111f45fff] PGTABLE
[    0.000000] BRK [0x111f46000, 0x111f46fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32520000-0x35287fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007BEFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007BECE188 0000DC (v01 LENOVO TP-R0D   00000000 PTEC 00000002)
[    0.000000] ACPI: FACP 0x000000007BEF7000 0000F4 (v05 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x000000007BEDE000 013070 (v02 LENOVO TP-R0D   00000330 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000007BE76000 000040
[    0.000000] ACPI: UEFI 0x000000007BE8C000 000042 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x000000007BEF9000 003245 (v02 LENOVO SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007BEF8000 00075C (v02 LENOVO PerfTune 00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007BEF6000 000038 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: APIC 0x000000007BEF5000 0000BC (v03 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x000000007BEF4000 00003C (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: ASF! 0x000000007BEF3000 000061 (v32 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: ECDT 0x000000007BEF2000 000052 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x000000007BEDB000 002DED (v01 LENOVO SataAhci 00001000 INTL 20160422)
[    0.000000] ACPI: BOOT 0x000000007BEDA000 000028 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: BATB 0x000000007BED9000 00004A (v02 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x000000007BED8000 000EE0 (v02 LENOVO CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007BED7000 0004FC (v02 LENOVO CtdpB    00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000007BED6000 000034 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: DBG2 0x000000007BED5000 000054 (v00 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x000000007BED4000 000055 (v03 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x000000007BED3000 00006C (v01 LENOVO NvOptTbl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007BED1000 001728 (v02 LENOVO SgUlt    00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007BED0000 000024 (v02 LENOVO SgPch    00001000 INTL 20160422)
[    0.000000] ACPI: FPDT 0x000000007BECF000 000044 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: BGRT 0x000000007BEFD000 000038 (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x000000007BE53000 00013E (v01 LENOVO TP-R0D   00000330 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27f7d5000-0x27f7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000070dfbfff]
[    0.000000]   node   0: [mem 0x0000000070dfe000-0x000000007a763fff]
[    0.000000]   node   0: [mem 0x000000007beff000-0x000000007befffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027f7fffff]
[    0.000000] On node 0 totalpages: 2072318
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7774 pages used for memmap
[    0.000000]   DMA32 zone: 497507 pages, LIFO batch:31
[    0.000000]   Normal zone: 24544 pages used for memmap
[    0.000000]   Normal zone: 1570816 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later)
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x70dfc000-0x70dfcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x70dfd000-0x70dfdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a764000-0x7a815fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a816000-0x7be48fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be49000-0x7be4afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be4b000-0x7be4bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be4c000-0x7be99fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be9a000-0x7befefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf00000-0x7f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xf80f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.000000] e820: [mem 0x7f800000-0xf80f9fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2039914
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=7f5b4364-6f8c-47eb-98aa-2bf9ed71e4ac ro splash quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7945528K/8289272K available (12300K kernel code, 2470K rwdata, 4224K rodata, 2404K init, 2416K bss, 343744K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: Detected 2900.000 MHz processor
[    0.028000] tsc: Detected 2904.000 MHz TSC
[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=11616000)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Security Framework initialized
[    0.028000] Yama: becoming mindful.
[    0.028000] AppArmor: AppArmor initialized
[    0.028000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] CPU: Physical Processor ID: 0
[    0.028000] CPU: Processor Core ID: 0
[    0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028000] mce: CPU supports 8 MCE banks
[    0.028000] CPU0: Thermal monitoring enabled (TM1)
[    0.028000] process: using mwait in idle threads
[    0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028000] Spectre V2 : Mitigation: Full generic retpoline
[    0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.028000] Freeing SMP alternatives memory: 36K
[    0.040000] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.040000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.040000] ... version:                4
[    0.040000] ... bit width:              48
[    0.040000] ... generic registers:      4
[    0.040000] ... value mask:             0000ffffffffffff
[    0.040000] ... max period:             00007fffffffffff
[    0.040000] ... fixed-purpose events:   3
[    0.040000] ... event mask:             000000070000000f
[    0.040000] Hierarchical SRCU implementation.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.040000]  #2 #3
[    0.040000] smp: Brought up 1 node, 4 CPUs
[    0.040000] smpboot: Max logical packages: 1
[    0.040000] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
[    0.040292] devtmpfs: initialized
[    0.040292] x86/mm: Memory block size: 128MB
[    0.040454] evm: security.selinux
[    0.040454] evm: security.SMACK64
[    0.040455] evm: security.SMACK64EXEC
[    0.040455] evm: security.SMACK64TRANSMUTE
[    0.040455] evm: security.SMACK64MMAP
[    0.040455] evm: security.apparmor
[    0.040456] evm: security.ima
[    0.040456] evm: security.capability
[    0.040466] PM: Registering ACPI NVS region [mem 0x70dfc000-0x70dfcfff] (4096 bytes)
[    0.040466] PM: Registering ACPI NVS region [mem 0x7be49000-0x7be4afff] (8192 bytes)
[    0.040466] PM: Registering ACPI NVS region [mem 0x7be4c000-0x7be99fff] (319488 bytes)
[    0.040466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040466] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040466] pinctrl core: initialized pinctrl subsystem
[    0.040466] RTC time:  3:23:15, date: 06/24/18
[    0.040466] NET: Registered protocol family 16
[    0.040466] audit: initializing netlink subsys (disabled)
[    0.040466] audit: type=2000 audit(1529810595.040:1): state=initialized audit_enabled=0 res=1
[    0.040466] cpuidle: using governor ladder
[    0.040466] cpuidle: using governor menu
[    0.040466] Simple Boot Flag at 0x47 set to 0x1
[    0.040466] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040466] ACPI: bus type PCI registered
[    0.040466] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040466] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040466] PCI: not using MMCONFIG
[    0.040466] PCI: Using configuration type 1 for base access
[    0.040793] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.040793] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044045] ACPI: Added _OSI(Module Device)
[    0.044046] ACPI: Added _OSI(Processor Device)
[    0.044046] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044047] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044049] ACPI: EC: EC started
[    0.044049] ACPI: EC: interrupt blocked
[    0.045295] ACPI: \: Used as first EC
[    0.045296] ACPI: \: GPE=0x20, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.045297] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.045500] ACPI: Executed 8 blocks of module-level executable AML code
[    0.048721] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.068517] ACPI: Dynamic OEM Table Load:
[    0.068517] ACPI: SSDT 0xFFFF8ED4F693F000 000891 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.068517] ACPI: Executed 1 blocks of module-level executable AML code
[    0.068517] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.068749] ACPI: Dynamic OEM Table Load:
[    0.068754] ACPI: SSDT 0xFFFF8ED4F555E400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.068906] ACPI: Executed 1 blocks of module-level executable AML code
[    0.072520] ACPI: Dynamic OEM Table Load:
[    0.072525] ACPI: SSDT 0xFFFF8ED4F5476000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.072933] ACPI: Executed 1 blocks of module-level executable AML code
[    0.072940] ACPI: Dynamic OEM Table Load:
[    0.072940] ACPI: SSDT 0xFFFF8ED4F55CA200 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.072940] ACPI: Executed 1 blocks of module-level executable AML code
[    0.073150] ACPI: Interpreter enabled
[    0.073185] ACPI: (supports S0 S3 S4 S5)
[    0.073186] ACPI: Using IOAPIC for interrupt routing
[    0.073206] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.073526] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.073541] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.073757] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.083416] ACPI: Power Resource [PUBS] (on)
[    0.092486] ACPI: Power Resource [PC01] (on)
[    0.093386] ACPI: Power Resource [WRST] (on)
[    0.123294] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.123397] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.123499] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.123599] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.123699] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.123799] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.123899] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.124008] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.124106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.124111] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.124229] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.124283] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.124284] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.124286] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.124287] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.125176] PCI host bridge to bus 0000:00
[    0.125178] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.125180] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.125181] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.125182] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.125183] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.125184] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.125185] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.125187] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.125188] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.125189] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.125190] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.125191] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.125192] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.125193] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.125194] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.125195] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfeafffff window]
[    0.125197] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.125206] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.125623] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.125635] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.125642] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.125646] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    0.125660] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.126140] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.126164] pci 0000:00:14.0: reg 0x10: [mem 0xf2400000-0xf240ffff 64bit]
[    0.126228] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.126740] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.126761] pci 0000:00:14.2: reg 0x10: [mem 0xf242a000-0xf242afff 64bit]
[    0.127223] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.127243] pci 0000:00:16.0: reg 0x10: [mem 0xf242b000-0xf242bfff 64bit]
[    0.127296] pci 0000:00:16.0: PME# supported from D3hot
[    0.127748] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.127766] pci 0000:00:17.0: reg 0x10: [mem 0xf2428000-0xf2429fff]
[    0.127774] pci 0000:00:17.0: reg 0x14: [mem 0xf242e000-0xf242e0ff]
[    0.127781] pci 0000:00:17.0: reg 0x18: [io  0xe080-0xe087]
[    0.127788] pci 0000:00:17.0: reg 0x1c: [io  0xe088-0xe08b]
[    0.127795] pci 0000:00:17.0: reg 0x20: [io  0xe060-0xe07f]
[    0.127802] pci 0000:00:17.0: reg 0x24: [mem 0xf242c000-0xf242c7ff]
[    0.127842] pci 0000:00:17.0: PME# supported from D3hot
[    0.128257] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.128323] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.128744] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.128820] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.129248] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.129311] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.129717] pci 0000:00:1d.2: [8086:9d1a] type 01 class 0x060400
[    0.129783] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.130192] pci 0000:00:1d.3: [8086:9d1b] type 01 class 0x060400
[    0.130262] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[    0.130692] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.131196] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.131210] pci 0000:00:1f.2: reg 0x10: [mem 0xf2424000-0xf2427fff]
[    0.131650] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.131678] pci 0000:00:1f.3: reg 0x10: [mem 0xf2420000-0xf2423fff 64bit]
[    0.131711] pci 0000:00:1f.3: reg 0x20: [mem 0xf2410000-0xf241ffff 64bit]
[    0.131761] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.132173] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.132226] pci 0000:00:1f.4: reg 0x10: [mem 0xf242d000-0xf242d0ff 64bit]
[    0.132276] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.132767] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[    0.132789] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf1ffffff]
[    0.132801] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.132811] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.132818] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.132826] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.132980] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.132982] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.132985] pci 0000:00:1c.0:   bridge window [mem 0xf1000000-0xf1ffffff]
[    0.132989] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.133119] pci 0000:02:00.0: [1217:8621] type 00 class 0x080501
[    0.133149] pci 0000:02:00.0: reg 0x10: [mem 0xf2301000-0xf2301fff]
[    0.133158] pci 0000:02:00.0: reg 0x14: [mem 0xf2300000-0xf23007ff]
[    0.133284] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.144149] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.144154] pci 0000:00:1c.4:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.144197] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.144272] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.144312] pci 0000:04:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.144344] pci 0000:04:00.0: reg 0x18: [mem 0xf2204000-0xf2204fff 64bit]
[    0.144366] pci 0000:04:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit]
[    0.144483] pci 0000:04:00.0: supports D1 D2
[    0.144484] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156086] pci 0000:00:1d.2: PCI bridge to [bus 04]
[    0.156089] pci 0000:00:1d.2:   bridge window [io  0xc000-0xcfff]
[    0.156092] pci 0000:00:1d.2:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.156228] pci 0000:05:00.0: [168c:0042] type 00 class 0x028000
[    0.156290] pci 0000:05:00.0: reg 0x10: [mem 0xf2000000-0xf21fffff 64bit]
[    0.156563] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.168198] pci 0000:00:1d.3: PCI bridge to [bus 05]
[    0.168203] pci 0000:00:1d.3:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.174872] ACPI: EC: interrupt unblocked
[    0.174886] ACPI: EC: event unblocked
[    0.174898] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x20, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.174899] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.175092] SCSI subsystem initialized
[    0.176011] libata version 3.00 loaded.
[    0.176019] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[    0.176019] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.176019] pci 0000:00:02.0: vgaarb: setting as boot device
[    0.176019] vgaarb: loaded
[    0.176022] ACPI: bus type USB registered
[    0.176033] usbcore: registered new interface driver usbfs
[    0.176038] usbcore: registered new interface driver hub
[    0.176049] usbcore: registered new device driver usb
[    0.176073] EDAC MC: Ver: 3.0.0
[    0.176236] Registered efivars operations
[    0.228016] PCI: Using ACPI for IRQ routing
[    0.234674] PCI: pci_cache_line_size set to 64 bytes
[    0.234872] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.234873] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.234874] e820: reserve RAM buffer [mem 0x70dfc000-0x73ffffff]
[    0.234874] e820: reserve RAM buffer [mem 0x7a764000-0x7bffffff]
[    0.234875] e820: reserve RAM buffer [mem 0x7bf00000-0x7bffffff]
[    0.234876] e820: reserve RAM buffer [mem 0x27f800000-0x27fffffff]
[    0.234935] NetLabel: Initializing
[    0.234936] NetLabel:  domain hash size = 128
[    0.234936] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.234945] NetLabel:  unlabeled traffic allowed by default
[    0.234955] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.234955] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.236001] clocksource: Switched to clocksource hpet
[    0.243668] VFS: Disk quotas dquot_6.6.0
[    0.243678] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.243749] AppArmor: AppArmor Filesystem Enabled
[    0.243763] pnp: PnP ACPI init
[    0.244108] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.244110] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.244111] system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
[    0.244112] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.244113] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
[    0.244116] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.244207] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.244209] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.244210] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.244211] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.244212] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.244213] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.244214] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.244215] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.244216] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.244217] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[    0.244220] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244273] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.244288] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.244308] pnp 00:04: Plug and Play ACPI device, IDs LEN2043 PNP0f13 (active)
[    0.244334] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.244336] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.245237] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.245238] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.245239] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.245240] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.245241] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.245242] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.245243] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.245246] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245486] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.245489] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245543] pnp: PnP ACPI: found 8 devices
[    0.252727] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.252730] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.252749] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.252751] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.252752] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.252769] pci 0000:00:1d.0: BAR 14: assigned [mem 0x7f800000-0x7f9fffff]
[    0.252775] pci 0000:00:1d.0: BAR 15: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref]
[    0.252777] pci 0000:00:1d.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.252780] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.252781] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.252782] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.252784] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.252787] pci 0000:00:1c.0:   bridge window [mem 0xf1000000-0xf1ffffff]
[    0.252789] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.252793] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.252798] pci 0000:00:1c.4:   bridge window [mem 0xf2300000-0xf23fffff]
[    0.252803] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.252805] pci 0000:00:1d.0:   bridge window [io  0x2000-0x2fff]
[    0.252808] pci 0000:00:1d.0:   bridge window [mem 0x7f800000-0x7f9fffff]
[    0.252811] pci 0000:00:1d.0:   bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref]
[    0.252814] pci 0000:00:1d.2: PCI bridge to [bus 04]
[    0.252816] pci 0000:00:1d.2:   bridge window [io  0xc000-0xcfff]
[    0.252819] pci 0000:00:1d.2:   bridge window [mem 0xf2200000-0xf22fffff]
[    0.252824] pci 0000:00:1d.3: PCI bridge to [bus 05]
[    0.252827] pci 0000:00:1d.3:   bridge window [mem 0xf2000000-0xf21fffff]
[    0.252833] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.252834] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.252835] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.252836] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.252837] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.252837] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.252838] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.252839] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.252840] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.252841] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.252842] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.252843] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.252844] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.252845] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.252846] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.252846] pci_bus 0000:00: resource 19 [mem 0x7f800000-0xfeafffff window]
[    0.252847] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.252848] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff]
[    0.252849] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.252850] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[    0.252851] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.252852] pci_bus 0000:03: resource 1 [mem 0x7f800000-0x7f9fffff]
[    0.252853] pci_bus 0000:03: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref]
[    0.252854] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.252855] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf22fffff]
[    0.252856] pci_bus 0000:05: resource 1 [mem 0xf2000000-0xf21fffff]
[    0.252935] NET: Registered protocol family 2
[    0.253086] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.253214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.253436] TCP: Hash tables configured (established 65536 bind 65536)
[    0.253488] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.253517] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.253568] NET: Registered protocol family 1
[    0.253576] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.253921] PCI: CLS 0 bytes, default 64
[    0.253949] Unpacking initramfs...
[    0.747304] Freeing initrd memory: 46496K
[    0.747312] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.747315] software IO TLB [mem 0x6b53a000-0x6f53a000] (64MB) mapped at [000000006427a2d2-000000001d1b486e]
[    0.747500] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    0.747636] Scanning for low memory corruption every 60 seconds
[    0.748231] Initialise system trusted keyrings
[    0.748238] Key type blacklist registered
[    0.748298] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.748995] zbud: loaded
[    0.749336] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.749460] fuse init (API version 7.26)
[    0.751694] Key type asymmetric registered
[    0.751695] Asymmetric key parser 'x509' registered
[    0.751711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.751760] io scheduler noop registered
[    0.751761] io scheduler deadline registered
[    0.751785] io scheduler cfq registered (default)
[    0.752491] efifb: probing for efifb
[    0.752500] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[    0.752501] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.752501] efifb: scrolling: redraw
[    0.752502] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.754014] Console: switching to colour frame buffer device 170x48
[    0.755366] fb0: EFI VGA frame buffer device
[    0.755373] intel_idle: MWAIT substates: 0x11142120
[    0.755373] intel_idle: v0.4.1 model 0x8E
[    0.755538] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.756139] ACPI: AC Adapter [AC] (on-line)
[    0.756176] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.756229] ACPI: Lid Switch [LID]
[    0.756247] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.756289] ACPI: Sleep Button [SLPB]
[    0.756321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.756367] ACPI: Power Button [PWRF]
[    0.761726] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.766697] thermal LNXTHERM:00: registered as thermal_zone0
[    0.766698] ACPI: Thermal Zone [THM0] (72 C)
[    0.766966] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.769747] Linux agpgart interface v0.103
[    0.771148] loop: module loaded
[    0.771306] libphy: Fixed MDIO Bus: probed
[    0.771307] tun: Universal TUN/TAP device driver, 1.6
[    0.771345] PPP generic driver version 2.4.2
[    0.771460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.771462] ehci-pci: EHCI PCI platform driver
[    0.771469] ehci-platform: EHCI generic platform driver
[    0.771476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.771477] ohci-pci: OHCI PCI platform driver
[    0.771487] ohci-platform: OHCI generic platform driver
[    0.771494] uhci_hcd: USB Universal Host Controller Interface driver
[    0.771614] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.771618] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.772704] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.772708] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.772836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.772837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.772838] usb usb1: Product: xHCI Host Controller
[    0.772839] usb usb1: Manufacturer: Linux 4.15.0-21deepin-generic xhci-hcd
[    0.772840] usb usb1: SerialNumber: 0000:00:14.0
[    0.773010] hub 1-0:1.0: USB hub found
[    0.773024] hub 1-0:1.0: 12 ports detected
[    0.774073] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.774075] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.774095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.774096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.774097] usb usb2: Product: xHCI Host Controller
[    0.774098] usb usb2: Manufacturer: Linux 4.15.0-21deepin-generic xhci-hcd
[    0.774099] usb usb2: SerialNumber: 0000:00:14.0
[    0.774217] hub 2-0:1.0: USB hub found
[    0.774227] hub 2-0:1.0: 6 ports detected
[    0.774600] usb: port power management may be unreliable
[    0.774822] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.783858] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.783861] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.784030] mousedev: PS/2 mouse device common for all mice
[    0.784294] rtc_cmos 00:02: RTC can wake from S4
[    0.784735] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.784834] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.784837] i2c /dev entries driver
[    0.784870] device-mapper: uevent: version 1.0.3
[    0.784927] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.784929] intel_pstate: Intel P-state driver initializing
[    0.785444] intel_pstate: HWP enabled
[    0.785615] ledtrig-cpu: registered to indicate activity on CPUs
[    0.785618] EFI Variables Facility v0.08 2004-May-17
[    0.851563] intel_pmc_core:  initialized
[    0.851770] NET: Registered protocol family 10
[    0.854776] Segment Routing with IPv6
[    0.854791] NET: Registered protocol family 17
[    0.854859] Key type dns_resolver registered
[    0.855193] RAS: Correctable Errors collector initialized.
[    0.855219] microcode: sig=0x806e9, pf=0x80, revision=0x34
[    0.855330] microcode: Microcode Update Driver: v2.2.
[    0.855336] sched_clock: Marking stable (855326859, 0)->(944401525, -89074666)
[    0.855667] registered taskstats version 1
[    0.855673] Loading compiled-in X.509 certificates
[    0.857302] Loaded X.509 cert 'Build time autogenerated kernel key: 958c1de384c42d9479a5269a5637284f6aa8c75f'
[    0.857995] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring
[    0.858008] Loaded UEFI:db cert 'Lenovo(Beijing) Ltd.: TPCDL-DB: 8c3ab149a818a81d27b206515bf12315b2f552eb' linked to secondary sys keyring
[    0.858018] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring
[    0.858035] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    0.858048] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    0.859772] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    0.860329] zswap: loaded using pool lzo/zbud
[    0.862433] Key type big_key registered
[    0.862435] Key type trusted registered
[    0.863460] Key type encrypted registered
[    0.863462] AppArmor: AppArmor sha1 policy hashing enabled
[    0.863464] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.863475] evm: HMAC attrs: 0x1
[    0.864736]   Magic number: 6:940:361
[    0.864869] ACPI: Battery Slot [BAT0] (battery present)
[    0.864940] rtc_cmos 00:02: setting system clock to 2018-06-24 03:23:16 UTC (1529810596)
[    0.865040] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.865040] EDD information not available.
[    0.866610] Freeing unused kernel memory: 2404K
[    0.866611] Write protecting the kernel read-only data: 20480k
[    0.866981] Freeing unused kernel memory: 2008K
[    0.869537] Freeing unused kernel memory: 1920K
[    0.873711] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.873712] x86/mm: Checking user space page tables
[    0.877862] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.877866] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.922563] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.922651] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.926640] ahci 0000:00:17.0: version 3.0
[    0.926810] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[    0.926812] ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    0.927034] scsi host0: ahci
[    0.928086] scsi host1: ahci
[    0.928128] ata1: SATA max UDMA/133 abar m2048@0xf242c000 port 0xf242c100 irq 121
[    0.928129] ata2: DUMMY
[    0.930202] sdhci: Secure Digital Host Controller Interface driver
[    0.930203] sdhci: Copyright(c) Pierre Ossman
[    0.931006] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    0.931149] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.931177] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.932837] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.932843] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.935791] sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8621] (rev 1)
[    0.935883] sdhci-pci 0000:02:00.0: enabling device (0000 -> 0002)
[    0.935977] mmc0: Unknown controller version (3). You may experience problems.
[    0.937607] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[    0.944983] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0x0000000079f374f9, c8:5b:76:ae:bb:36, XID 10900800 IRQ 122
[    0.944985] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.962697] AVX2 version of gcm_enc/dec engaged.
[    0.962698] AES CTR mode by8 optimization enabled
[    0.963070] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    0.970363] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    0.972055] [drm] Memory usable by graphics device = 4096M
[    0.972056] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    0.972057] fb: switching to inteldrmfb from EFI VGA
[    0.972071] Console: switching to colour dummy device 80x25
[    0.972145] [drm] Replacing VGA console driver
[    0.972403] i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
[    0.972404] i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
[    0.982550] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.982551] [drm] Driver supports precise vblank timestamp query.
[    0.984103] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[    0.984604] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    0.992776] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    0.994462] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.994747] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    0.994867] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    0.994887] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:01/input/input7
[    1.108116] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[    1.240442] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.242407] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.242409] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.243200] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    1.244268] ata1.00: supports DRM functions and may not be fully accessible
[    1.245191] ata1.00: ATA-9: SanDisk SD8TB8U256G1001, X4120101, max UDMA/133
[    1.245193] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.250203] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.250205] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.250998] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    1.252060] ata1.00: supports DRM functions and may not be fully accessible
[    1.255956] ata1.00: configured for UDMA/133
[    1.256307] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SD8TB8U2 0101 PQ: 0 ANSI: 5
[    1.256657] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.256817] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.256844] sd 0:0:0:0: [sda] Write Protect is off
[    1.256846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.256944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.258807] usb 1-3: New USB device found, idVendor=275d, idProduct=0ba6
[    1.258809] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.258810] usb 1-3: Product: USB OPTICAL MOUSE 
[    1.259397]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    1.261588] hidraw: raw HID events driver (C) Jiri Kosina
[    1.264090] usbcore: registered new interface driver usbhid
[    1.264090] usbhid: USB HID core driver
[    1.265043] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:275D:0BA6.0001/input/input8
[    1.265174] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-3/input0
[    1.377582] sd 0:0:0:0: [sda] supports TCG Opal
[    1.377583] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.384114] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.448803] fbcon: inteldrmfb (fb0) is primary device
[    1.534378] usb 1-6: New USB device found, idVendor=0cf3, idProduct=e500
[    1.534379] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.660224] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.756424] clocksource: Switched to clocksource tsc
[    1.847833] usb 1-7: New USB device found, idVendor=04f2, idProduct=b5c0
[    1.847834] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.847836] usb 1-7: Product: Integrated Camera
[    1.847837] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.847837] usb 1-7: SerialNumber: 0001
[    1.949657] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    1.995932] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    1.995936] psmouse serio1: synaptics: Your touchpad (PNP: LEN2043 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.085978] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf005a3/0x943300/0x12e800/0x410000, board id: 3157, fw id: 2403788
[    2.085983] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.149312] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.541177] psmouse serio2: trackpoint: failed to get extended button data, assuming 3 buttons
[    2.559571] Console: switching to colour frame buffer device 170x48
[    2.581913] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.696010] raid6: sse2x1   gen() 12357 MB/s
[    2.744005] raid6: sse2x1   xor()  9001 MB/s
[    2.792001] raid6: sse2x2   gen() 15085 MB/s
[    2.840003] raid6: sse2x2   xor() 10348 MB/s
[    2.844305] [drm] RC6 on
[    2.888006] raid6: sse2x4   gen() 16217 MB/s
[    2.936006] raid6: sse2x4   xor() 11217 MB/s
[    2.984005] raid6: avx2x1   gen() 24627 MB/s
[    3.032003] raid6: avx2x1   xor() 17103 MB/s
[    3.080001] raid6: avx2x2   gen() 29931 MB/s
[    3.128003] raid6: avx2x2   xor() 18785 MB/s
[    3.176003] raid6: avx2x4   gen() 31341 MB/s
[    3.224002] raid6: avx2x4   xor() 20785 MB/s
[    3.224002] raid6: using algorithm avx2x4 gen() 31341 MB/s
[    3.224003] raid6: .... xor() 20785 MB/s, rmw enabled
[    3.224004] raid6: using avx2x2 recovery algorithm
[    3.224719] xor: automatically using best checksumming function   avx       
[    3.225344] async_tx: api initialized (async)
[    3.514308] Btrfs loaded, crc32c=crc32c-intel
[    3.571965] PM: Starting manual resume from disk
[    3.572118] PM: Image not found (code -22)
[    3.606841] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.740707] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.857827] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.876085] systemd[1]: Detected architecture x86-64.
[    3.876267] systemd[1]: Set hostname to <linusboyle-PC>.
[    3.952647] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.952836] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.952846] systemd[1]: Reached target User and Group Name Lookups.
[    3.952968] systemd[1]: Created slice System Slice.
[    3.953400] systemd[1]: Mounting POSIX Message Queue File System...
[    3.953458] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.953568] systemd[1]: Created slice User and Session Slice.
[    3.965660] vfs_monitor: loading out-of-tree module taints kernel.
[    3.965681] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[    3.965898] mp: /, major: 8, minor: 6
[    3.965899] partition count: 1, comm[338]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
[    3.977552] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    4.009531] systemd-journald[343]: Received request to flush runtime journal from PID 1
[    4.031876] register_kretprobes 10 ok
[    4.041828] lp: driver loaded but no devices found
[    4.045100] ppdev: user-space parallel port driver
[    4.050907] bbswitch: version 0.8
[    4.050911] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    4.050915] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PEGP
[    4.050924] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    4.051017] bbswitch: detected an Optimus _DSM function
[    4.051032] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    4.051074] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    4.121155] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.127814] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.139549] Non-volatile memory driver v1.3
[    4.164966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.165974] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.165975] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.165975] thinkpad_acpi: ThinkPad BIOS R0DET33W (1.09 ), EC unknown
[    4.165976] thinkpad_acpi: Lenovo ThinkPad E470, model 20H1001WCD
[    4.183069] thinkpad_acpi: radio switch found; radios are enabled
[    4.183083] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.183083] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.193851] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.193855] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    4.194211] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.203253] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.203256] cfg80211: failed to load regulatory.db
[    4.208734] Error: Driver 'pcspkr' is already registered, aborting...
[    4.218112] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.228320] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    4.242361] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.261896] snd_hda_codec_conexant hdaudioC0D0: CX20753/4: BIOS auto-probing.
[    4.262166] random: crng init done
[    4.262206] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20753/4: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.262208] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.262209] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    4.262211] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    4.262212] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    4.262213] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[    4.262215] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[    4.262997] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    4.277486] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.277488] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.277488] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.277489] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.277489] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.277490] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.277660] Adding 17051644k swap on /dev/sda7.  Priority:-2 extents:1 across:17051644k SSFS
[    4.294507] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[    4.311956] ath10k_pci 0000:05:00.0: enabling device (0000 -> 0002)
[    4.313001] ath10k_pci 0000:05:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    4.332789] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    4.332828] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    4.332866] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.332904] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.332945] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.332990] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.333034] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    4.336230] kvm: disabled by bios
[    4.352121] partition /boot/efi [8, 1] added, comm[490]: mount
[    4.393731] intel_rapl: Found RAPL domain package
[    4.393732] intel_rapl: Found RAPL domain core
[    4.393733] intel_rapl: Found RAPL domain uncore
[    4.393734] intel_rapl: Found RAPL domain dram
[    4.498905] wl: module license 'MIXED/Proprietary' taints kernel.
[    4.498907] Disabling lock debugging due to kernel taint
[    4.643751] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:05:00.0.bin failed with error -2
[    4.643762] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/cal-pci-0000:05:00.0.bin failed with error -2
[    4.644104] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[    4.647034] ath10k_pci 0000:05:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[    4.647035] ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    4.647367] ath10k_pci 0000:05:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
[    4.709712] bbswitch: disabling discrete graphics
[    4.712064] ath10k_pci 0000:05:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[    5.119985] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.138269] r8169 0000:04:00.0 enp4s0: link down
[    5.138345] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.204587] ath10k_pci 0000:05:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    5.221942] ath: EEPROM regdomain: 0x6c
[    5.221943] ath: EEPROM indicates we should expect a direct regpair map
[    5.221944] ath: Country alpha2 being used: 00
[    5.221945] ath: Regpair used: 0x6c
[    5.232838] ath10k_pci 0000:05:00.0 wlp5s0: renamed from wlan0
[    5.265156] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.937497] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    6.008395] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    6.564023] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.834104] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[    6.972906] media: Linux media interface: v0.10
[    6.977869] Bluetooth: Core ver 2.22
[    6.977890] NET: Registered protocol family 31
[    6.977891] Bluetooth: HCI device and connection manager initialized
[    6.977894] Bluetooth: HCI socket layer initialized
[    6.977895] Bluetooth: L2CAP socket layer initialized
[    6.977900] Bluetooth: SCO socket layer initialized
[    6.991150] Linux video capture interface: v2.00
[    7.005795] usbcore: registered new interface driver btusb
[    7.029843] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5c0)
[    7.032351] uvcvideo: Failed to initialize entity for entity 6
[    7.032352] uvcvideo: Failed to register entites (-22).
[    7.032468] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19
[    7.032770] usbcore: registered new interface driver uvcvideo
[    7.032771] USB Video Class driver (1.1.1)
[    7.072601] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.072602] Bluetooth: BNEP filters: protocol multicast
[    7.072605] Bluetooth: BNEP socket layer initialized
[   15.633997] wlp5s0: authenticate with a8:58:40:d6:42:d0
[   15.674631] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[   15.675539] wlp5s0: authenticated
[   15.680013] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[   15.686660] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[   15.688880] wlp5s0: associated
[   15.689122] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   15.691555] ath: EEPROM regdomain: 0x809c
[   15.691556] ath: EEPROM indicates we should expect a country code
[   15.691556] ath: doing EEPROM country->regdmn map search
[   15.691556] ath: country maps to regdmn code: 0x52
[   15.691557] ath: Country alpha2 being used: CN
[   15.691557] ath: Regpair used: 0x52
[   15.691558] ath: regdomain 0x809c dynamically updated by country IE
[   15.772043] NET: Registered protocol family 15
[   15.786562] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[   15.793134] Initializing XFRM netlink socket
[  202.250540] Bluetooth: RFCOMM TTY layer initialized
[  202.250545] Bluetooth: RFCOMM socket layer initialized
[  202.250548] Bluetooth: RFCOMM ver 1.11
[ 2010.416133] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:c0
[ 2010.423366] wlp5s0: authenticate with a8:58:40:d6:42:c0
[ 2010.464084] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[ 2010.466102] wlp5s0: a8:58:40:d6:42:c0 denied authentication (status 17)
[ 2010.840968] wlp5s0: authenticate with a8:58:40:d6:42:d0
[ 2010.881737] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[ 2010.882923] wlp5s0: authenticated
[ 2010.884620] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[ 2010.890058] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[ 2010.892260] wlp5s0: associated
[ 2010.894997] ath: EEPROM regdomain: 0x809c
[ 2010.894998] ath: EEPROM indicates we should expect a country code
[ 2010.894998] ath: doing EEPROM country->regdmn map search
[ 2010.894999] ath: country maps to regdmn code: 0x52
[ 2010.895000] ath: Country alpha2 being used: CN
[ 2010.895000] ath: Regpair used: 0x52
[ 2010.895001] ath: regdomain 0x809c dynamically updated by country IE
[ 2010.912056] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[ 5626.520182] input: DC:A4:CA:C2:54:8E as /devices/virtual/input/input20
[ 9473.526113] partition /media/linusboyle/新加卷 [8, 4] added, comm[12445]: mount.ntfs
[ 9473.536151] partition /media/linusboyle/Windows [8, 3] added, comm[12441]: mount.ntfs
[15210.249406] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:3b:c0
[15210.256039] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[15210.296573] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[15210.298593] wlp5s0: authenticated
[15210.299945] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[15210.306943] wlp5s0: RX ReassocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=0 aid=2)
[15210.309151] wlp5s0: associated
[15210.312063] ath: EEPROM regdomain: 0x809c
[15210.312063] ath: EEPROM indicates we should expect a country code
[15210.312064] ath: doing EEPROM country->regdmn map search
[15210.312064] ath: country maps to regdmn code: 0x52
[15210.312065] ath: Country alpha2 being used: CN
[15210.312065] ath: Regpair used: 0x52
[15210.312066] ath: regdomain 0x809c dynamically updated by country IE
[15210.371046] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:3b:c0
[15330.378435] wlp5s0: disconnect from AP a8:58:40:d6:3b:c0 for new auth to a8:58:40:d6:42:d0
[15330.385230] wlp5s0: authenticate with a8:58:40:d6:42:d0
[15330.425488] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[15330.426847] wlp5s0: authenticated
[15330.427843] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[15330.432691] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[15330.434793] wlp5s0: associated
[15330.439282] ath: EEPROM regdomain: 0x809c
[15330.439282] ath: EEPROM indicates we should expect a country code
[15330.439283] ath: doing EEPROM country->regdmn map search
[15330.439283] ath: country maps to regdmn code: 0x52
[15330.439284] ath: Country alpha2 being used: CN
[15330.439284] ath: Regpair used: 0x52
[15330.439285] ath: regdomain 0x809c dynamically updated by country IE
[15330.549121] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[15450.398423] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:3b:c0
[15450.404735] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[15450.445940] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[15450.451101] wlp5s0: authenticated
[15450.451702] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[15450.474184] wlp5s0: RX ReassocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=0 aid=2)
[15450.476448] wlp5s0: associated
[15450.479354] ath: EEPROM regdomain: 0x809c
[15450.479355] ath: EEPROM indicates we should expect a country code
[15450.479356] ath: doing EEPROM country->regdmn map search
[15450.479356] ath: country maps to regdmn code: 0x52
[15450.479357] ath: Country alpha2 being used: CN
[15450.479357] ath: Regpair used: 0x52
[15450.479358] ath: regdomain 0x809c dynamically updated by country IE
[15450.603885] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:3b:c0
[15506.111719] wlp5s0: Connection to AP a8:58:40:d6:3b:c0 lost
[15511.231721] ath10k_pci 0000:05:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[15511.543422] wlp5s0: authenticate with a8:58:40:d6:42:d0
[15511.583970] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[15511.585048] wlp5s0: authenticated
[15511.587719] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[15511.594016] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[15511.596105] wlp5s0: associated
[15511.598288] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[15511.599175] ath: EEPROM regdomain: 0x809c
[15511.599175] ath: EEPROM indicates we should expect a country code
[15511.599176] ath: doing EEPROM country->regdmn map search
[15511.599176] ath: country maps to regdmn code: 0x52
[15511.599176] ath: Country alpha2 being used: CN
[15511.599177] ath: Regpair used: 0x52
[15511.599177] ath: regdomain 0x809c dynamically updated by country IE
[16770.262527] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:5e:20
[16770.270754] wlp5s0: authenticate with a8:58:40:d6:5e:20
[16770.303781] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[16770.305770] wlp5s0: authenticated
[16770.308140] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[16770.319776] wlp5s0: RX ReassocResp from a8:58:40:d6:5e:20 (capab=0x1021 status=0 aid=1)
[16770.321696] wlp5s0: associated
[16770.324409] ath: EEPROM regdomain: 0x809c
[16770.324410] ath: EEPROM indicates we should expect a country code
[16770.324410] ath: doing EEPROM country->regdmn map search
[16770.324411] ath: country maps to regdmn code: 0x52
[16770.324411] ath: Country alpha2 being used: CN
[16770.324412] ath: Regpair used: 0x52
[16770.324412] ath: regdomain 0x809c dynamically updated by country IE
[16771.275422] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[17490.473697] wlp5s0: disconnect from AP a8:58:40:d6:5e:20 for new auth to a8:58:40:d6:42:d0
[17490.480343] wlp5s0: authenticate with a8:58:40:d6:42:d0
[17490.521173] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[17490.522172] wlp5s0: authenticated
[17490.528823] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[17490.542095] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[17490.544184] wlp5s0: associated
[17490.546886] ath: EEPROM regdomain: 0x809c
[17490.546887] ath: EEPROM indicates we should expect a country code
[17490.546887] ath: doing EEPROM country->regdmn map search
[17490.546888] ath: country maps to regdmn code: 0x52
[17490.546888] ath: Country alpha2 being used: CN
[17490.546889] ath: Regpair used: 0x52
[17490.546889] ath: regdomain 0x809c dynamically updated by country IE
[17490.745232] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[17610.388983] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:e0
[17610.395462] wlp5s0: authenticate with a8:58:40:d6:42:e0
[17610.435521] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[17610.443023] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 2/3)
[17610.447639] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 3/3)
[17610.452306] wlp5s0: authentication with a8:58:40:d6:42:e0 timed out
[17610.783519] wlp5s0: authenticate with a8:58:40:d6:42:d0
[17610.823667] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[17610.824831] wlp5s0: authenticated
[17610.828843] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[17610.835963] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[17610.838496] wlp5s0: associated
[17610.841180] ath: EEPROM regdomain: 0x809c
[17610.841181] ath: EEPROM indicates we should expect a country code
[17610.841181] ath: doing EEPROM country->regdmn map search
[17610.841182] ath: country maps to regdmn code: 0x52
[17610.841182] ath: Country alpha2 being used: CN
[17610.841182] ath: Regpair used: 0x52
[17610.841183] ath: regdomain 0x809c dynamically updated by country IE
[17610.965884] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[19410.409757] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:5e:20
[19410.416256] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19410.456467] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19410.460054] wlp5s0: authenticated
[19410.465182] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19410.480297] wlp5s0: associate with a8:58:40:d6:5e:20 (try 2/3)
[19410.496222] wlp5s0: associate with a8:58:40:d6:5e:20 (try 3/3)
[19410.508681] wlp5s0: association with a8:58:40:d6:5e:20 timed out
[19410.774991] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19410.814993] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19410.816187] wlp5s0: authenticated
[19410.817184] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19410.822196] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=2)
[19410.824555] wlp5s0: associated
[19410.827363] ath: EEPROM regdomain: 0x809c
[19410.827364] ath: EEPROM indicates we should expect a country code
[19410.827364] ath: doing EEPROM country->regdmn map search
[19410.827364] ath: country maps to regdmn code: 0x52
[19410.827365] ath: Country alpha2 being used: CN
[19410.827365] ath: Regpair used: 0x52
[19410.827366] ath: regdomain 0x809c dynamically updated by country IE
[19410.898847] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[19412.071172] wlp5s0: deauthenticated from a8:58:40:d6:42:d0 (Reason: 3=DEAUTH_LEAVING)
[19417.017216] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19417.057743] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19417.066727] wlp5s0: authenticated
[19417.069168] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[19417.173212] wlp5s0: associate with a8:58:40:d6:42:c0 (try 2/3)
[19417.185784] wlp5s0: associate with a8:58:40:d6:42:c0 (try 3/3)
[19417.200464] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=0 aid=1)
[19417.202848] wlp5s0: associated
[19417.203543] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:c0
[19417.205883] ath: EEPROM regdomain: 0x809c
[19417.205883] ath: EEPROM indicates we should expect a country code
[19417.205884] ath: doing EEPROM country->regdmn map search
[19417.205884] ath: country maps to regdmn code: 0x52
[19417.205885] ath: Country alpha2 being used: CN
[19417.205885] ath: Regpair used: 0x52
[19417.205886] ath: regdomain 0x809c dynamically updated by country IE
[19536.854224] wlp5s0: disassociated from a8:58:40:d6:42:c0 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[19537.200377] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19537.240149] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19537.241098] wlp5s0: authenticated
[19537.248958] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19537.250066] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19537.250068] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19542.178693] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19542.218879] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19542.221501] wlp5s0: authenticated
[19542.225048] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[19542.229687] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=8 aid=0)
[19542.229690] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[19543.406251] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19543.446333] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19543.447204] wlp5s0: authenticated
[19543.448945] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19543.449996] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19543.449998] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19549.280633] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19549.319776] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19549.324192] wlp5s0: authenticated
[19549.324962] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[19549.428972] wlp5s0: associate with a8:58:40:d6:42:e0 (try 2/3)
[19549.443266] wlp5s0: associate with a8:58:40:d6:42:e0 (try 3/3)
[19549.452890] wlp5s0: association with a8:58:40:d6:42:e0 timed out
[19550.527207] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19550.562447] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19550.565404] wlp5s0: authenticated
[19550.568929] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19550.590331] wlp5s0: RX AssocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=0 aid=2)
[19550.592583] wlp5s0: associated
[19550.595915] ath: EEPROM regdomain: 0x809c
[19550.595915] ath: EEPROM indicates we should expect a country code
[19550.595916] ath: doing EEPROM country->regdmn map search
[19550.595916] ath: country maps to regdmn code: 0x52
[19550.595917] ath: Country alpha2 being used: CN
[19550.595917] ath: Regpair used: 0x52
[19550.595918] ath: regdomain 0x809c dynamically updated by country IE
[19550.648126] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:3b:c0
[19670.989728] wlp5s0: disassociated from a8:58:40:d6:3b:c0 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[19671.180404] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19671.219963] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19671.224604] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 2/3)
[19671.239909] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 3/3)
[19671.242739] wlp5s0: authenticated
[19671.244794] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19671.252786] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19671.254967] wlp5s0: associated
[19671.258033] ath: EEPROM regdomain: 0x809c
[19671.258034] ath: EEPROM indicates we should expect a country code
[19671.258034] ath: doing EEPROM country->regdmn map search
[19671.258035] ath: country maps to regdmn code: 0x52
[19671.258035] ath: Country alpha2 being used: CN
[19671.258036] ath: Regpair used: 0x52
[19671.258036] ath: regdomain 0x809c dynamically updated by country IE
[19671.275178] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[19676.758552] wlp5s0: deauthenticating from a8:58:40:d6:5e:20 by local choice (Reason: 3=DEAUTH_LEAVING)
[19681.688999] wlp5s0: authenticate with a8:58:40:d6:5e:30
[19681.729035] wlp5s0: send auth to a8:58:40:d6:5e:30 (try 1/3)
[19681.730043] wlp5s0: authenticated
[19681.732726] wlp5s0: associate with a8:58:40:d6:5e:30 (try 1/3)
[19681.736611] wlp5s0: RX AssocResp from a8:58:40:d6:5e:30 (capab=0x1401 status=0 aid=4)
[19681.738671] wlp5s0: associated
[19681.741765] ath: EEPROM regdomain: 0x809c
[19681.741766] ath: EEPROM indicates we should expect a country code
[19681.741766] ath: doing EEPROM country->regdmn map search
[19681.741767] ath: country maps to regdmn code: 0x52
[19681.741767] ath: Country alpha2 being used: CN
[19681.741768] ath: Regpair used: 0x52
[19681.741768] ath: regdomain 0x809c dynamically updated by country IE
[19681.802835] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:5e:30
[19698.876770] wlp5s0: Connection to AP a8:58:40:d6:5e:30 lost
[19699.068648] wlp5s0: authenticate with a8:58:40:d6:5c:80
[19699.109086] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 1/3)
[19699.212767] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 2/3)
[19699.221284] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 3/3)
[19699.226471] wlp5s0: authentication with a8:58:40:d6:5c:80 timed out
[19704.174415] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19704.214045] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19704.216085] wlp5s0: authenticated
[19704.216690] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[19704.220115] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=8 aid=0)
[19704.220117] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[19705.645677] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19705.685422] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19705.686347] wlp5s0: authenticated
[19705.688685] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19705.689723] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19705.689725] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19706.814534] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19706.854898] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19706.859884] wlp5s0: authenticated
[19706.860695] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19706.867900] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19706.870104] wlp5s0: associated
[19706.873681] ath: EEPROM regdomain: 0x809c
[19706.873683] ath: EEPROM indicates we should expect a country code
[19706.873683] ath: doing EEPROM country->regdmn map search
[19706.873684] ath: country maps to regdmn code: 0x52
[19706.873684] ath: Country alpha2 being used: CN
[19706.873685] ath: Regpair used: 0x52
[19706.873686] ath: regdomain 0x809c dynamically updated by country IE
[19706.915691] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[19742.495187] wlp5s0: deauthenticating from a8:58:40:d6:5e:20 by local choice (Reason: 3=DEAUTH_LEAVING)
[19742.708940] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19742.748640] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19742.754223] wlp5s0: authenticated
[19742.756627] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19742.760045] wlp5s0: RX AssocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=8 aid=0)
[19742.760047] wlp5s0: a8:58:40:d6:3b:c0 denied association (code=8)
[19742.986100] wlp5s0: authenticate with a8:58:40:d6:5c:80
[19743.026136] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 1/3)
[19743.031284] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 2/3)
[19743.035961] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 3/3)
[19743.041307] wlp5s0: authentication with a8:58:40:d6:5c:80 timed out
[19747.972751] wlp5s0: authenticate with a8:58:40:d6:42:d1
[19748.012850] wlp5s0: send auth to a8:58:40:d6:42:d1 (try 1/3)
[19748.013774] wlp5s0: authenticated
[19748.016623] wlp5s0: associate with a8:58:40:d6:42:d1 (try 1/3)
[19748.017686] wlp5s0: RX AssocResp from a8:58:40:d6:42:d1 (capab=0x1401 status=8 aid=0)
[19748.017688] wlp5s0: a8:58:40:d6:42:d1 denied association (code=8)
[19752.923498] wlp5s0: authenticate with a8:58:40:d6:41:80
[19752.964472] wlp5s0: send auth to a8:58:40:d6:41:80 (try 1/3)
[19752.969133] wlp5s0: send auth to a8:58:40:d6:41:80 (try 2/3)
[19753.072719] wlp5s0: send auth to a8:58:40:d6:41:80 (try 3/3)
[19753.077493] wlp5s0: authentication with a8:58:40:d6:41:80 timed out
[19754.814935] wlp5s0: authenticate with a8:58:40:d6:42:d1
[19754.860650] wlp5s0: send auth to a8:58:40:d6:42:d1 (try 1/3)
[19754.861554] wlp5s0: authenticated
[19754.864620] wlp5s0: associate with a8:58:40:d6:42:d1 (try 1/3)
[19754.865741] wlp5s0: RX AssocResp from a8:58:40:d6:42:d1 (capab=0x1401 status=8 aid=0)
[19754.865743] wlp5s0: a8:58:40:d6:42:d1 denied association (code=8)
[19756.170189] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19756.209933] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19756.210843] wlp5s0: authenticated
[19756.212611] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19756.213816] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19756.213819] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19757.346230] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19757.385817] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19757.390747] wlp5s0: authenticated
[19757.392609] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[19757.410611] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1021 status=0 aid=1)
[19757.413057] wlp5s0: associated
[19757.416263] ath: EEPROM regdomain: 0x809c
[19757.416264] ath: EEPROM indicates we should expect a country code
[19757.416264] ath: doing EEPROM country->regdmn map search
[19757.416265] ath: country maps to regdmn code: 0x52
[19757.416265] ath: Country alpha2 being used: CN
[19757.416266] ath: Regpair used: 0x52
[19757.416266] ath: regdomain 0x809c dynamically updated by country IE
[19757.470596] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[19770.433179] wlp5s0: disconnect from AP a8:58:40:d6:42:e0 for new auth to a8:58:40:d6:3b:c0
[19770.439549] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19770.479651] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19770.482775] wlp5s0: authenticated
[19770.484645] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19770.488104] wlp5s0: RX ReassocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=8 aid=0)
[19770.488106] wlp5s0: a8:58:40:d6:3b:c0 denied association (code=8)
[19770.657888] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19770.697529] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19770.704327] wlp5s0: authenticated
[19770.704583] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[19770.720174] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1021 status=0 aid=1)
[19770.722507] wlp5s0: associated
[19770.725909] ath: EEPROM regdomain: 0x809c
[19770.725910] ath: EEPROM indicates we should expect a country code
[19770.725911] ath: doing EEPROM country->regdmn map search
[19770.725911] ath: country maps to regdmn code: 0x52
[19770.725912] ath: Country alpha2 being used: CN
[19770.725912] ath: Regpair used: 0x52
[19770.725913] ath: regdomain 0x809c dynamically updated by country IE
[19770.885330] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[19891.850538] wlp5s0: disassociated from a8:58:40:d6:42:e0 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[19892.044270] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19892.083461] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19892.086887] wlp5s0: authenticated
[19892.088407] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19892.098503] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19892.100938] wlp5s0: associated
[19892.103952] ath: EEPROM regdomain: 0x809c
[19892.103953] ath: EEPROM indicates we should expect a country code
[19892.103954] ath: doing EEPROM country->regdmn map search
[19892.103954] ath: country maps to regdmn code: 0x52
[19892.103955] ath: Country alpha2 being used: CN
[19892.103955] ath: Regpair used: 0x52
[19892.103956] ath: regdomain 0x809c dynamically updated by country IE
[19901.372472] wlp5s0: Connection to AP a8:58:40:d6:5e:20 lost
[19906.327435] wlp5s0: authenticate with a8:58:40:d6:42:f0
[19906.371498] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[19906.372356] wlp5s0: authenticated
[19906.376391] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[19906.377409] wlp5s0: RX AssocResp from a8:58:40:d6:42:f0 (capab=0x1401 status=8 aid=0)
[19906.377412] wlp5s0: a8:58:40:d6:42:f0 denied association (code=8)
[19911.314384] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19911.354249] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19911.356282] wlp5s0: a8:58:40:d6:42:c0 denied authentication (status 17)
[19912.776964] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19912.816867] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19912.817699] wlp5s0: authenticated
[19912.820387] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19912.822024] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19912.822027] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19914.101801] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19914.141597] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19914.148330] wlp5s0: authenticated
[19914.152375] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[19914.162594] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1021 status=8 aid=581)
[19914.162595] wlp5s0: a8:58:40:d6:42:e0 denied association (code=8)
[19915.439046] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19915.478206] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19915.480723] wlp5s0: authenticated
[19915.484376] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19915.490476] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19915.492619] wlp5s0: associated
[19915.495700] ath: EEPROM regdomain: 0x809c
[19915.495701] ath: EEPROM indicates we should expect a country code
[19915.495701] ath: doing EEPROM country->regdmn map search
[19915.495702] ath: country maps to regdmn code: 0x52
[19915.495702] ath: Country alpha2 being used: CN
[19915.495703] ath: Regpair used: 0x52
[19915.495703] ath: regdomain 0x809c dynamically updated by country IE
[19924.668448] wlp5s0: Connection to AP a8:58:40:d6:5e:20 lost
[19925.023775] wlp5s0: authenticate with a8:58:40:d6:42:f0
[19925.067889] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[19925.068927] wlp5s0: authenticated
[19925.072363] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[19925.073464] wlp5s0: RX AssocResp from a8:58:40:d6:42:f0 (capab=0x1401 status=8 aid=0)
[19925.073466] wlp5s0: a8:58:40:d6:42:f0 denied association (code=8)
[19925.249699] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19925.290060] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19925.295487] wlp5s0: authenticated
[19925.296426] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19925.305646] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 2/3)
[19925.314925] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 3/3)
[19925.420433] wlp5s0: association with a8:58:40:d6:3b:c0 timed out
[19930.345910] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19930.386022] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19930.390195] wlp5s0: authenticated
[19930.396419] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[19930.399880] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=8 aid=0)
[19930.399881] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[19931.825395] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19931.865790] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19931.866620] wlp5s0: authenticated
[19931.868357] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19931.869410] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19931.869413] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19933.157837] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19933.198321] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19933.206930] wlp5s0: authenticated
[19933.208353] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[19933.218864] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1021 status=8 aid=0)
[19933.218866] wlp5s0: a8:58:40:d6:42:e0 denied association (code=8)
[19934.514810] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19934.554287] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19934.556343] wlp5s0: authenticated
[19934.560350] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19934.573389] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19934.575723] wlp5s0: associated
[19934.578900] ath: EEPROM regdomain: 0x809c
[19934.578901] ath: EEPROM indicates we should expect a country code
[19934.578901] ath: doing EEPROM country->regdmn map search
[19934.578902] ath: country maps to regdmn code: 0x52
[19934.578902] ath: Country alpha2 being used: CN
[19934.578903] ath: Regpair used: 0x52
[19934.578903] ath: regdomain 0x809c dynamically updated by country IE
[19934.968997] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[19944.380409] wlp5s0: Connection to AP a8:58:40:d6:5e:20 lost
[19944.731764] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19944.771539] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19944.773527] wlp5s0: authenticated
[19944.776336] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19944.781624] wlp5s0: RX AssocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=8 aid=0)
[19944.781626] wlp5s0: a8:58:40:d6:3b:c0 denied association (code=8)
[19945.114397] wlp5s0: authenticate with a8:58:40:d6:42:f0
[19945.158605] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[19945.162026] wlp5s0: authenticated
[19945.164368] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[19945.166215] wlp5s0: RX AssocResp from a8:58:40:d6:42:f0 (capab=0x1401 status=8 aid=0)
[19945.166217] wlp5s0: a8:58:40:d6:42:f0 denied association (code=8)
[19945.341797] wlp5s0: authenticate with a8:58:40:d6:5c:80
[19945.382023] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 1/3)
[19945.386705] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 2/3)
[19945.394141] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 3/3)
[19945.400026] wlp5s0: authentication with a8:58:40:d6:5c:80 timed out
[19945.578470] wlp5s0: authenticate with a8:58:40:d6:3f:c0
[19945.618798] wlp5s0: send auth to a8:58:40:d6:3f:c0 (try 1/3)
[19945.623474] wlp5s0: send auth to a8:58:40:d6:3f:c0 (try 2/3)
[19945.628106] wlp5s0: send auth to a8:58:40:d6:3f:c0 (try 3/3)
[19945.633738] wlp5s0: authentication with a8:58:40:d6:3f:c0 timed out
[19945.814309] wlp5s0: authenticate with a8:58:40:d5:fa:e0
[19945.853952] wlp5s0: send auth to a8:58:40:d5:fa:e0 (try 1/3)
[19945.858631] wlp5s0: send auth to a8:58:40:d5:fa:e0 (try 2/3)
[19945.864458] wlp5s0: send auth to a8:58:40:d5:fa:e0 (try 3/3)
[19945.869189] wlp5s0: authentication with a8:58:40:d5:fa:e0 timed out
[19950.793287] wlp5s0: authenticate with a8:58:40:d6:42:c0
[19950.833067] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[19950.835248] wlp5s0: authenticated
[19950.836341] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[19950.839805] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=8 aid=0)
[19950.839807] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[19952.265301] wlp5s0: authenticate with a8:58:40:d6:42:d0
[19952.305391] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[19952.306588] wlp5s0: authenticated
[19952.308328] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[19952.309502] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[19952.309504] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[19953.593063] wlp5s0: authenticate with a8:58:40:d6:42:e0
[19953.632901] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[19953.640967] wlp5s0: a8:58:40:d6:42:e0 denied authentication (status 17)
[19954.914499] wlp5s0: authenticate with a8:58:40:d6:5e:20
[19954.954302] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[19954.957437] wlp5s0: authenticated
[19954.960356] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[19954.967736] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[19954.970109] wlp5s0: associated
[19954.973224] ath: EEPROM regdomain: 0x809c
[19954.973225] ath: EEPROM indicates we should expect a country code
[19954.973226] ath: doing EEPROM country->regdmn map search
[19954.973226] ath: country maps to regdmn code: 0x52
[19954.973227] ath: Country alpha2 being used: CN
[19954.973227] ath: Regpair used: 0x52
[19954.973228] ath: regdomain 0x809c dynamically updated by country IE
[19960.258312] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[19982.780399] wlp5s0: Connection to AP a8:58:40:d6:5e:20 lost
[19983.124193] wlp5s0: authenticate with a8:58:40:d6:42:f0
[19983.168207] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[19983.169106] wlp5s0: authenticated
[19983.172284] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[19983.276364] wlp5s0: associate with a8:58:40:d6:42:f0 (try 2/3)
[19983.380353] wlp5s0: associate with a8:58:40:d6:42:f0 (try 3/3)
[19983.484352] wlp5s0: association with a8:58:40:d6:42:f0 timed out
[19983.661467] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[19983.702344] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[19983.705665] wlp5s0: authenticated
[19983.708358] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[19983.816360] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 2/3)
[19983.920281] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 3/3)
[19984.032357] wlp5s0: association with a8:58:40:d6:3b:c0 timed out
[19988.965257] wlp5s0: authenticate with a8:58:40:d6:5e:30
[19989.005493] wlp5s0: send auth to a8:58:40:d6:5e:30 (try 1/3)
[19989.006330] wlp5s0: authenticated
[19989.008278] wlp5s0: associate with a8:58:40:d6:5e:30 (try 1/3)
[19989.112359] wlp5s0: associate with a8:58:40:d6:5e:30 (try 2/3)
[19989.216346] wlp5s0: associate with a8:58:40:d6:5e:30 (try 3/3)
[19989.221085] wlp5s0: RX AssocResp from a8:58:40:d6:5e:30 (capab=0x1401 status=0 aid=4)
[19989.223475] wlp5s0: associated
[19989.226583] ath: EEPROM regdomain: 0x809c
[19989.226584] ath: EEPROM indicates we should expect a country code
[19989.226584] ath: doing EEPROM country->regdmn map search
[19989.226585] ath: country maps to regdmn code: 0x52
[19989.226585] ath: Country alpha2 being used: CN
[19989.226586] ath: Regpair used: 0x52
[19989.226586] ath: regdomain 0x809c dynamically updated by country IE
[19989.934466] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:5e:30
[20010.568730] wlp5s0: disconnect from AP a8:58:40:d6:5e:30 for new auth to a8:58:40:d6:5c:80
[20010.575119] wlp5s0: authenticate with a8:58:40:d6:5c:80
[20010.615217] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 1/3)
[20010.619878] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 2/3)
[20010.626527] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 3/3)
[20010.631207] wlp5s0: authentication with a8:58:40:d6:5c:80 timed out
[20010.958320] wlp5s0: authenticate with a8:58:40:d6:5e:30
[20010.998717] wlp5s0: send auth to a8:58:40:d6:5e:30 (try 1/3)
[20010.999896] wlp5s0: authenticated
[20011.000245] wlp5s0: associate with a8:58:40:d6:5e:30 (try 1/3)
[20011.006697] wlp5s0: RX AssocResp from a8:58:40:d6:5e:30 (capab=0x1401 status=0 aid=4)
[20011.008945] wlp5s0: associated
[20011.011645] ath: EEPROM regdomain: 0x809c
[20011.011646] ath: EEPROM indicates we should expect a country code
[20011.011646] ath: doing EEPROM country->regdmn map search
[20011.011646] ath: country maps to regdmn code: 0x52
[20011.011647] ath: Country alpha2 being used: CN
[20011.011647] ath: Regpair used: 0x52
[20011.011648] ath: regdomain 0x809c dynamically updated by country IE
[20011.131749] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:5e:30
[20062.396222] wlp5s0: Connection to AP a8:58:40:d6:5e:30 lost
[20062.595737] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[20062.635835] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[20062.637787] wlp5s0: authenticated
[20062.640178] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[20062.643554] wlp5s0: RX AssocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=8 aid=0)
[20062.643556] wlp5s0: a8:58:40:d6:3b:c0 denied association (code=8)
[20064.224928] wlp5s0: authenticate with a8:58:40:d6:42:d0
[20064.265211] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[20064.265998] wlp5s0: authenticated
[20064.268216] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[20064.269290] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[20064.269292] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[20065.709381] wlp5s0: authenticate with a8:58:40:d6:42:f0
[20065.753178] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[20065.754201] wlp5s0: authenticated
[20065.756182] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[20065.864173] wlp5s0: associate with a8:58:40:d6:42:f0 (try 2/3)
[20065.968202] wlp5s0: associate with a8:58:40:d6:42:f0 (try 3/3)
[20066.072260] wlp5s0: association with a8:58:40:d6:42:f0 timed out
[20067.162318] wlp5s0: authenticate with a8:58:40:d6:5c:80
[20067.202053] wlp5s0: send auth to a8:58:40:d6:5c:80 (try 1/3)
[20067.206480] wlp5s0: a8:58:40:d6:5c:80 denied authentication (status 17)
[20073.034365] wlp5s0: authenticate with a8:58:40:d6:42:c0
[20073.074087] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[20073.079824] wlp5s0: authenticated
[20073.080162] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[20073.092244] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=8 aid=0)
[20073.092246] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[20074.174391] wlp5s0: authenticate with a8:58:40:d6:5e:20
[20074.214103] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[20074.216091] wlp5s0: authenticated
[20074.220164] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[20074.226127] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[20074.228400] wlp5s0: associated
[20074.231693] ath: EEPROM regdomain: 0x809c
[20074.231694] ath: EEPROM indicates we should expect a country code
[20074.231694] ath: doing EEPROM country->regdmn map search
[20074.231695] ath: country maps to regdmn code: 0x52
[20074.231695] ath: Country alpha2 being used: CN
[20074.231696] ath: Regpair used: 0x52
[20074.231696] ath: regdomain 0x809c dynamically updated by country IE
[20075.662856] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[20176.587397] r8169 0000:04:00.0 enp4s0: link up
[20176.587403] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[20194.497393] wlp5s0: deauthenticating from a8:58:40:d6:5e:20 by local choice (Reason: 3=DEAUTH_LEAVING)
[21992.974170] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[21993.063381] wlp5s0: authenticate with a8:58:40:d6:5e:20
[21993.102453] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[21993.105736] wlp5s0: authenticated
[21993.106599] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[21993.115583] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=1)
[21993.117703] wlp5s0: associated
[21993.117873] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[21993.120346] ath: EEPROM regdomain: 0x809c
[21993.120347] ath: EEPROM indicates we should expect a country code
[21993.120347] ath: doing EEPROM country->regdmn map search
[21993.120348] ath: country maps to regdmn code: 0x52
[21993.120348] ath: Country alpha2 being used: CN
[21993.120348] ath: Regpair used: 0x52
[21993.120349] ath: regdomain 0x809c dynamically updated by country IE
[21993.142678] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[22050.399051] wlp5s0: disconnect from AP a8:58:40:d6:5e:20 for new auth to a8:58:40:d6:42:d0
[22050.405398] wlp5s0: authenticate with a8:58:40:d6:42:d0
[22050.446255] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[22050.447050] wlp5s0: authenticated
[22050.450518] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[22050.455297] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=4)
[22050.457390] wlp5s0: associated
[22050.460166] ath: EEPROM regdomain: 0x809c
[22050.460167] ath: EEPROM indicates we should expect a country code
[22050.460167] ath: doing EEPROM country->regdmn map search
[22050.460168] ath: country maps to regdmn code: 0x52
[22050.460168] ath: Country alpha2 being used: CN
[22050.460169] ath: Regpair used: 0x52
[22050.460169] ath: regdomain 0x809c dynamically updated by country IE
[22050.535756] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[22890.259109] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:c0
[22890.265588] wlp5s0: authenticate with a8:58:40:d6:42:c0
[22890.305861] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[22890.308855] wlp5s0: authenticated
[22890.313912] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[22890.321726] wlp5s0: RX ReassocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=0 aid=1)
[22890.323804] wlp5s0: associated
[22890.326511] ath: EEPROM regdomain: 0x809c
[22890.326512] ath: EEPROM indicates we should expect a country code
[22890.326513] ath: doing EEPROM country->regdmn map search
[22890.326513] ath: country maps to regdmn code: 0x52
[22890.326514] ath: Country alpha2 being used: CN
[22890.326514] ath: Regpair used: 0x52
[22890.326515] ath: regdomain 0x809c dynamically updated by country IE
[22890.345439] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:c0
[22943.367367] wlp5s0: deauthenticating from a8:58:40:d6:42:c0 by local choice (Reason: 3=DEAUTH_LEAVING)
[24739.970992] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[24740.372888] wlp5s0: authenticate with a8:58:40:d6:42:d0
[24740.412833] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[24740.413800] wlp5s0: authenticated
[24740.416540] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[24740.421007] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[24740.423394] wlp5s0: associated
[24740.423676] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[24740.426692] ath: EEPROM regdomain: 0x809c
[24740.426693] ath: EEPROM indicates we should expect a country code
[24740.426694] ath: doing EEPROM country->regdmn map search
[24740.426694] ath: country maps to regdmn code: 0x52
[24740.426694] ath: Country alpha2 being used: CN
[24740.426695] ath: Regpair used: 0x52
[24740.426695] ath: regdomain 0x809c dynamically updated by country IE
[24740.450229] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[26638.727492] wlp5s0: deauthenticating from a8:58:40:d6:42:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[28437.978258] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[28448.030826] wlp5s0: authenticate with a8:58:40:d6:42:c0
[28448.070650] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[28448.072969] wlp5s0: authenticated
[28448.075678] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[28448.089418] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=0 aid=1)
[28448.091680] wlp5s0: associated
[28448.091829] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[28448.094442] ath: EEPROM regdomain: 0x809c
[28448.094443] ath: EEPROM indicates we should expect a country code
[28448.094443] ath: doing EEPROM country->regdmn map search
[28448.094444] ath: country maps to regdmn code: 0x52
[28448.094444] ath: Country alpha2 being used: CN
[28448.094444] ath: Regpair used: 0x52
[28448.094445] ath: regdomain 0x809c dynamically updated by country IE
[28448.273237] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:c0
[28650.450814] wlp5s0: disconnect from AP a8:58:40:d6:42:c0 for new auth to a8:58:40:d6:42:d0
[28650.457413] wlp5s0: authenticate with a8:58:40:d6:42:d0
[28650.497251] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[28650.498155] wlp5s0: authenticated
[28650.500072] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[28650.505741] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=2)
[28650.507725] wlp5s0: associated
[28650.510698] ath: EEPROM regdomain: 0x809c
[28650.510698] ath: EEPROM indicates we should expect a country code
[28650.510699] ath: doing EEPROM country->regdmn map search
[28650.510699] ath: country maps to regdmn code: 0x52
[28650.510700] ath: Country alpha2 being used: CN
[28650.510700] ath: Regpair used: 0x52
[28650.510701] ath: regdomain 0x809c dynamically updated by country IE
[28650.607376] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[29730.372660] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:c0
[29730.379371] wlp5s0: authenticate with a8:58:40:d6:42:c0
[29730.420583] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[29730.423721] wlp5s0: authenticated
[29730.425830] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[29730.529838] wlp5s0: associate with a8:58:40:d6:42:c0 (try 2/3)
[29730.549073] wlp5s0: RX ReassocResp from a8:58:40:d6:42:c0 (capab=0x1021 status=0 aid=1)
[29730.551227] wlp5s0: associated
[29730.554369] ath: EEPROM regdomain: 0x809c
[29730.554370] ath: EEPROM indicates we should expect a country code
[29730.554370] ath: doing EEPROM country->regdmn map search
[29730.554371] ath: country maps to regdmn code: 0x52
[29730.554371] ath: Country alpha2 being used: CN
[29730.554371] ath: Regpair used: 0x52
[29730.554372] ath: regdomain 0x809c dynamically updated by country IE
[29730.636439] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:c0
[38411.807023] wlp5s0: deauthenticating from a8:58:40:d6:42:c0 by local choice (Reason: 3=DEAUTH_LEAVING)
[40211.959526] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[40212.171830] wlp5s0: authenticate with a8:58:40:d6:42:d0
[40212.212163] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[40212.213007] wlp5s0: authenticated
[40212.215206] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[40212.219937] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=3)
[40212.222297] wlp5s0: associated
[40212.222526] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[40212.224989] ath: EEPROM regdomain: 0x809c
[40212.224990] ath: EEPROM indicates we should expect a country code
[40212.224991] ath: doing EEPROM country->regdmn map search
[40212.224991] ath: country maps to regdmn code: 0x52
[40212.224992] ath: Country alpha2 being used: CN
[40212.224992] ath: Regpair used: 0x52
[40212.224993] ath: regdomain 0x809c dynamically updated by country IE
[40212.308851] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[43361.024659] conky[1344]: segfault at 10 ip 00007f7eb3be3b20 sp 00007f7ea33de8b8 error 4 in libpthread-2.24.so[7f7eb3bda000+18000]
[43620.491197] perf: interrupt took too long (2602 > 2500), lowering kernel.perf_event_max_sample_rate to 76750
[49144.539670] wlp5s0: deauthenticating from a8:58:40:d6:42:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[49149.632935] PM: suspend entry (deep)
[49149.632936] PM: Syncing filesystems ... done.
[49149.641995] bbswitch: enabling discrete graphics
[49149.694297] Freezing user space processes ... (elapsed 0.001 seconds) done.
[49149.696005] OOM killer disabled.
[49149.696005] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[49149.697118] Suspending console(s) (use no_console_suspend to debug)
[49149.893931] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[49149.894696] sd 0:0:0:0: [sda] Stopping disk
[49151.302031] ACPI: Preparing to enter system sleep state S3
[49151.581805] ACPI: EC: event blocked
[49151.581806] ACPI: EC: EC stopped
[49151.581806] PM: Saving platform NVS memory
[49151.581809] Disabling non-boot CPUs ...
[49151.597906] IRQ 123: no longer affine to CPU1
[49151.598908] smpboot: CPU 1 is now offline
[49151.621896] IRQ 120: no longer affine to CPU2
[49151.621898] IRQ 121: no longer affine to CPU2
[49151.621900] IRQ 122: no longer affine to CPU2
[49151.622902] smpboot: CPU 2 is now offline
[49151.645853] IRQ 1: no longer affine to CPU3
[49151.645860] IRQ 8: no longer affine to CPU3
[49151.645861] IRQ 9: no longer affine to CPU3
[49151.645871] IRQ 12: no longer affine to CPU3
[49151.645883] IRQ fixup: irq 126 move in progress, old vector 41
[49151.645890] IRQ 126: no longer affine to CPU3
[49151.646888] smpboot: CPU 3 is now offline
[49151.649496] ACPI: Low-level resume complete
[49151.649610] ACPI: EC: EC started
[49151.649611] PM: Restoring platform NVS memory
[49151.650362] Enabling non-boot CPUs ...
[49151.650413] x86: Booting SMP configuration:
[49151.650414] smpboot: Booting Node 0 Processor 1 APIC 0x2
[49151.809038]  cache: parent cpu1 should not be sleeping
[49151.809161] CPU1 is up
[49151.809192] smpboot: Booting Node 0 Processor 2 APIC 0x1
[49151.969008]  cache: parent cpu2 should not be sleeping
[49151.969141] CPU2 is up
[49151.969161] smpboot: Booting Node 0 Processor 3 APIC 0x3
[49152.129002]  cache: parent cpu3 should not be sleeping
[49152.129138] CPU3 is up
[49152.132221] ACPI: Waking up from system sleep state S3
[49152.916196] ACPI: button: The lid device is not compliant to SW_LID.
[49152.916200] ACPI: EC: event unblocked
[49152.916924] sd 0:0:0:0: [sda] Starting disk
[49152.931256] r8169 0000:04:00.0 enp4s0: link down
[49153.205311] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[49153.228514] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[49153.230292] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49153.230294] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49153.230940] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[49153.231788] ata1.00: supports DRM functions and may not be fully accessible
[49153.236841] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49153.236842] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49153.237475] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[49153.238367] ata1.00: supports DRM functions and may not be fully accessible
[49153.241660] ata1.00: configured for UDMA/133
[49153.481446] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[49153.817306] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[49153.863508] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[49154.058964] acpi LNXPOWER:02: Turning OFF
[49154.068187] OOM killer enabled.
[49154.068188] Restarting tasks ... 
[49154.075179] [drm] RC6 on
[49154.075553] done.
[49154.209192] bbswitch: disabling discrete graphics
[49154.329025] PM: suspend exit
[49154.380494] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[49154.395018] r8169 0000:04:00.0 enp4s0: link down
[49154.395167] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[49154.395699] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[49155.045316] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[49155.084100] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[49156.025557] r8169 0000:04:00.0 enp4s0: link up
[49156.025564] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[49164.710297] wlp5s0: authenticate with a8:58:40:d6:42:d0
[49164.749888] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[49164.751160] wlp5s0: authenticated
[49164.752888] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[49164.757006] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=1)
[49164.759291] wlp5s0: associated
[49164.759674] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[49164.762337] ath: EEPROM regdomain: 0x809c
[49164.762338] ath: EEPROM indicates we should expect a country code
[49164.762339] ath: doing EEPROM country->regdmn map search
[49164.762339] ath: country maps to regdmn code: 0x52
[49164.762340] ath: Country alpha2 being used: CN
[49164.762340] ath: Regpair used: 0x52
[49164.762341] ath: regdomain 0x809c dynamically updated by country IE
[49164.831819] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[49416.486845] wlp5s0: deauthenticating from a8:58:40:d6:42:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[62381.641485] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[62381.641487] Bluetooth: HIDP socket layer initialized
[62381.641922] hid-generic 0005:046D:B33D.0002: unknown main item tag 0x0
[62381.642004] input: Keyboard K480 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/bluetooth/hci0/hci0:1/0005:046D:B33D.0002/input/input21
[62381.642847] hid-generic 0005:046D:B33D.0002: input,hidraw1: BLUETOOTH HID v28.03 Keyboard [Keyboard K480] on 28:56:5a:27:59:ce
[62400.699636] hid-generic 0005:046D:B33D.0003: unknown main item tag 0x0
[62400.699747] input: Keyboard K480 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/bluetooth/hci0/hci0:3/0005:046D:B33D.0003/input/input22
[62400.700757] hid-generic 0005:046D:B33D.0003: input,hidraw1: BLUETOOTH HID v28.03 Keyboard [Keyboard K480] on 28:56:5a:27:59:ce
[64056.659021] perf: interrupt took too long (3265 > 3252), lowering kernel.perf_event_max_sample_rate to 61250
[82976.828273] et[18822]: segfault at 0 ip 00007f4a029efa6d sp 00007f49a57f94c0 error 6 in libQtCore.so.4.7.4[7f4a0271d000+edf000]
[85050.539412] perf: interrupt took too long (4149 > 4081), lowering kernel.perf_event_max_sample_rate to 48000
[94874.335764] PM: suspend entry (deep)
[94874.335785] PM: Syncing filesystems ... done.
[94874.350174] bbswitch: enabling discrete graphics
[94874.419767] Freezing user space processes ... (elapsed 0.001 seconds) done.
[94874.421448] OOM killer disabled.
[94874.421448] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[94874.422623] Suspending console(s) (use no_console_suspend to debug)
[94874.618261] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[94874.619478] sd 0:0:0:0: [sda] Stopping disk
[94876.059753] ACPI: Preparing to enter system sleep state S3
[94876.339510] ACPI: EC: event blocked
[94876.339510] ACPI: EC: EC stopped
[94876.339511] PM: Saving platform NVS memory
[94876.339514] Disabling non-boot CPUs ...
[94876.355614] IRQ fixup: irq 126 move in progress, old vector 43
[94876.355621] IRQ 126: no longer affine to CPU1
[94876.356866] smpboot: CPU 1 is now offline
[94876.379587] IRQ 120: no longer affine to CPU2
[94876.379588] IRQ 121: no longer affine to CPU2
[94876.379590] IRQ 122: no longer affine to CPU2
[94876.380590] smpboot: CPU 2 is now offline
[94876.403595] IRQ 1: no longer affine to CPU3
[94876.403597] IRQ 9: no longer affine to CPU3
[94876.403604] IRQ 12: no longer affine to CPU3
[94876.403608] IRQ 123: no longer affine to CPU3
[94876.404610] smpboot: CPU 3 is now offline
[94876.407286] ACPI: Low-level resume complete
[94876.407401] ACPI: EC: EC started
[94876.407401] PM: Restoring platform NVS memory
[94876.408156] Enabling non-boot CPUs ...
[94876.408245] x86: Booting SMP configuration:
[94876.408246] smpboot: Booting Node 0 Processor 1 APIC 0x2
[94876.566657]  cache: parent cpu1 should not be sleeping
[94876.566784] CPU1 is up
[94876.566804] smpboot: Booting Node 0 Processor 2 APIC 0x1
[94876.726658]  cache: parent cpu2 should not be sleeping
[94876.726795] CPU2 is up
[94876.726815] smpboot: Booting Node 0 Processor 3 APIC 0x3
[94876.886656]  cache: parent cpu3 should not be sleeping
[94876.886797] CPU3 is up
[94876.889860] ACPI: Waking up from system sleep state S3
[94877.673448] ACPI: EC: event unblocked
[94877.674604] sd 0:0:0:0: [sda] Starting disk
[94877.688924] r8169 0000:04:00.0 enp4s0: link down
[94877.963037] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[94877.986814] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[94877.988622] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[94877.988624] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[94877.989288] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[94877.990169] ata1.00: supports DRM functions and may not be fully accessible
[94877.995361] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[94877.995362] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[94877.996019] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[94877.996953] ata1.00: supports DRM functions and may not be fully accessible
[94878.000321] ata1.00: configured for UDMA/133
[94878.238962] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[94878.602320] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[94878.646691] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[94878.833973] acpi LNXPOWER:02: Turning OFF
[94878.840494] OOM killer enabled.
[94878.840495] Restarting tasks ... done.
[94878.849233] [drm] RC6 on
[94878.956839] bbswitch: disabling discrete graphics
[94879.070733] PM: suspend exit
[94879.142119] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[94879.156695] r8169 0000:04:00.0 enp4s0: link down
[94879.156821] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[94879.157362] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[94880.776318] r8169 0000:04:00.0 enp4s0: link up
[94880.776325] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[105892.701267] QDBusConnection[4949]: segfault at 7fcb417ed220 ip 00007fcba17ba58f sp 00007fcb90f37c00 error 4 in libQt5Core.so.5.6.1[7fcba151c000+4af000]
[105895.339931] QDBusConnection[4990]: segfault at 7fdee0064ff0 ip 00007fdef97ee58f sp 00007fdee8f6bc00 error 4 in libQt5Core.so.5.6.1[7fdef9550000+4af000]
[114130.097659] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[114130.118719] usb 2-4: New USB device found, idVendor=1058, idProduct=25e1
[114130.118720] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[114130.118721] usb 2-4: Product: My Passport 25E1
[114130.118722] usb 2-4: Manufacturer: Western Digital
[114130.118723] usb 2-4: SerialNumber: 575843314136373448593858
[114130.247826] usb-storage 2-4:1.0: USB Mass Storage device detected
[114130.247901] scsi host2: usb-storage 2-4:1.0
[114130.247965] usbcore: registered new interface driver usb-storage
[114130.250158] usbcore: registered new interface driver uas
[114131.277930] scsi 2:0:0:0: Direct-Access     WD       My Passport 25E1 1019 PQ: 0 ANSI: 6
[114131.278218] scsi 2:0:0:1: Enclosure         WD       SES Device       1019 PQ: 0 ANSI: 6
[114131.279272] sd 2:0:0:0: Attached scsi generic sg1 type 0
[114131.279370] scsi 2:0:0:1: Attached scsi generic sg2 type 13
[114131.280064] sd 2:0:0:0: [sdb] Spinning up disk...
[114132.301661] .
[114134.385302] scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[114134.385305] scsi 2:0:0:1: Failed to get diagnostic page 0x1
[114134.385307] scsi 2:0:0:1: Failed to bind enclosure -19
[114134.385323] ses 2:0:0:1: Attached Enclosure device
[114134.385386] ready
[114134.386740] sd 2:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[114134.386950] sd 2:0:0:0: [sdb] Write Protect is off
[114134.386951] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[114134.387190] sd 2:0:0:0: [sdb] No Caching mode page found
[114134.387194] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[114134.422541]  sdb: sdb1
[114134.423319] sd 2:0:0:0: [sdb] Attached SCSI disk
[114138.872645] EXT4-fs (sdb1): recovery complete
[114138.872749] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[114138.874325] partition /media/linusboyle/14f640fa-0f21-4213-9c8b-d7eaa8d58682 [8, 17] added, comm[10904]: mount
[139149.924182] QDBusConnection[4394]: segfault at 7f66204f1f10 ip 00007f66804a458f sp 00007f666bbcbc00 error 4 in libQt5Core.so.5.6.1[7f6680206000+4af000]
[139636.375851] vfs-change discarded[159]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/Precedes.nb, (null)
[139636.375972] vfs-change discarded[168]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/DoubleStruckEight.nb, (null)
[139636.376101] vfs-change discarded[157]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/NHacek.nb, (null)
[139636.376222] vfs-change discarded[164]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/FormalDigamma.nb, (null)
[139636.376343] vfs-change discarded[176]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/WolframLanguageLogoCircle.nb, (null)
[139636.376463] vfs-change discarded[158]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/GothicL.nb, (null)
[139636.376587] vfs-change discarded[160]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/MinusPlus.nb, (null)
[139636.376713] vfs-change discarded[165]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/GothicCapitalN.nb, (null)
[139636.376837] vfs-change discarded[165]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/FormalCapitalK.nb, (null)
[139636.376958] vfs-change discarded[160]: 1530024259 file-deleted, /usr/local/Wolfram/Mathematica/11.2/Documentation/English/System/ReferencePages/Characters/ScriptTwo.nb, (null)
[140887.355604] show_signal_msg: 19511 callbacks suppressed
[140887.355606] pool[8555]: segfault at 6c ip 00007fe806fd74f4 sp 00007fe800b73568 error 4 in libc-2.24.so[7fe806f5c000+195000]
[141515.653702] usb 2-4: USB disconnect, device number 2
[141515.734313] sys_umount: /media/linusboyle/14f640fa-0f21-4213-9c8b-d7eaa8d58682, 8, 17
[141515.762035] partition /media/linusboyle/14f640fa-0f21-4213-9c8b-d7eaa8d58682 [8, 17] umounted
[141515.762140] blk_partition_remap: fail for partition 1
[141515.762142] Buffer I/O error on dev sdb1, logical block 121667584, lost sync page write
[141515.762145] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[141515.762146] Aborting journal on device sdb1-8.
[141515.762147] blk_partition_remap: fail for partition 1
[141515.762148] Buffer I/O error on dev sdb1, logical block 121667584, lost sync page write
[141515.762149] JBD2: Error -5 detected when updating journal superblock for sdb1-8.
[141554.804945] PM: suspend entry (deep)
[141554.804946] PM: Syncing filesystems ... done.
[141554.809643] bbswitch: enabling discrete graphics
[141554.882328] Freezing user space processes ... (elapsed 0.001 seconds) done.
[141554.884154] OOM killer disabled.
[141554.884154] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[141554.885349] Suspending console(s) (use no_console_suspend to debug)
[141555.073982] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[141555.075127] sd 0:0:0:0: [sda] Stopping disk
[141556.502158] ACPI: Preparing to enter system sleep state S3
[141556.781917] ACPI: EC: event blocked
[141556.781917] ACPI: EC: EC stopped
[141556.781917] PM: Saving platform NVS memory
[141556.781921] Disabling non-boot CPUs ...
[141556.799018] smpboot: CPU 1 is now offline
[141556.818006] IRQ 120: no longer affine to CPU2
[141556.818008] IRQ 121: no longer affine to CPU2
[141556.818010] IRQ 122: no longer affine to CPU2
[141556.819009] smpboot: CPU 2 is now offline
[141556.841984] IRQ 1: no longer affine to CPU3
[141556.841986] IRQ 9: no longer affine to CPU3
[141556.841993] IRQ 12: no longer affine to CPU3
[141556.841996] IRQ 123: no longer affine to CPU3
[141556.842996] smpboot: CPU 3 is now offline
[141556.845631] ACPI: Low-level resume complete
[141556.845745] ACPI: EC: EC started
[141556.845746] PM: Restoring platform NVS memory
[141556.846498] Enabling non-boot CPUs ...
[141556.846549] x86: Booting SMP configuration:
[141556.846550] smpboot: Booting Node 0 Processor 1 APIC 0x2
[141557.005064]  cache: parent cpu1 should not be sleeping
[141557.005189] CPU1 is up
[141557.005220] smpboot: Booting Node 0 Processor 2 APIC 0x1
[141557.165065]  cache: parent cpu2 should not be sleeping
[141557.165200] CPU2 is up
[141557.165229] smpboot: Booting Node 0 Processor 3 APIC 0x3
[141557.325063]  cache: parent cpu3 should not be sleeping
[141557.325206] CPU3 is up
[141557.328292] ACPI: Waking up from system sleep state S3
[141558.107035] ACPI: EC: event unblocked
[141558.109018] sd 0:0:0:0: [sda] Starting disk
[141558.123344] r8169 0000:04:00.0 enp4s0: link down
[141558.397447] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[141558.420464] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[141558.422217] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[141558.422219] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[141558.422873] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[141558.423715] ata1.00: supports DRM functions and may not be fully accessible
[141558.429383] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[141558.429384] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[141558.430017] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[141558.430887] ata1.00: supports DRM functions and may not be fully accessible
[141558.434189] ata1.00: configured for UDMA/133
[141558.673378] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[141559.026920] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[141559.070870] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[141559.256462] acpi LNXPOWER:02: Turning OFF
[141559.266012] OOM killer enabled.
[141559.266012] Restarting tasks ... done.
[141559.272424] [drm] RC6 on
[141559.366939] bbswitch: disabling discrete graphics
[141559.457105] PM: suspend exit
[141559.512057] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[141559.531114] r8169 0000:04:00.0 enp4s0: link down
[141559.531202] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[141559.531713] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[141561.214353] r8169 0000:04:00.0 enp4s0: link up
[141561.214360] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[147595.617671] sys_umount: /tmp/.mount_dCCU9S, 0, 53
[147647.094050] sys_umount: /tmp/.mount_tiledOYCaV7, 0, 53
[148743.854472] pool[16338]: segfault at 6c ip 00007fcba55be4f4 sp 00007fcb9f15a538 error 4 in libc-2.24.so[7fcba5543000+195000]
[151489.136513] conky[17733]: segfault at 10 ip 00007f730a2b1b20 sp 00007f72f92ab8b8 error 4 in libpthread-2.24.so[7f730a2a8000+18000]
[151857.700342] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[151857.700343] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[151857.700345] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[151857.700345] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[151857.700347] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[151857.700351] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[151857.701362] CPU2: Core temperature/speed normal
[151857.701363] CPU0: Core temperature/speed normal
[151857.701363] CPU0: Package temperature/speed normal
[151857.701364] CPU2: Package temperature/speed normal
[151857.701392] CPU3: Package temperature/speed normal
[151857.701393] CPU1: Package temperature/speed normal
[157932.132915] conky[2630]: segfault at 10 ip 00007f81eb910b20 sp 00007f81db10b8b8 error 4 in libpthread-2.24.so[7f81eb907000+18000]
[158137.221334] conky[6736]: segfault at 10 ip 00007fd35c0eab20 sp 00007fd346ffc8b8 error 4 in libpthread-2.24.so[7fd35c0e1000+18000]
[159429.245770] conky[8846]: segfault at 10 ip 00007f8a6e197b20 sp 00007f8a5d9928b8 error 4 in libpthread-2.24.so[7f8a6e18e000+18000]
[171717.070250] perf: interrupt took too long (5225 > 5186), lowering kernel.perf_event_max_sample_rate to 38250
[175860.563036] r8169 0000:04:00.0 enp4s0: link down
[175862.205595] r8169 0000:04:00.0 enp4s0: link up
[191038.506560] PM: suspend entry (deep)
[191038.506561] PM: Syncing filesystems ... done.
[191038.528382] bbswitch: enabling discrete graphics
[191038.600806] Freezing user space processes ... (elapsed 0.001 seconds) done.
[191038.602699] OOM killer disabled.
[191038.602700] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[191038.603928] Suspending console(s) (use no_console_suspend to debug)
[191038.800478] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[191038.801684] sd 0:0:0:0: [sda] Stopping disk
[191040.204754] ACPI: Preparing to enter system sleep state S3
[191040.484510] ACPI: EC: event blocked
[191040.484510] ACPI: EC: EC stopped
[191040.484511] PM: Saving platform NVS memory
[191040.484514] Disabling non-boot CPUs ...
[191040.501635] smpboot: CPU 1 is now offline
[191040.524608] IRQ 120: no longer affine to CPU2
[191040.524610] IRQ 121: no longer affine to CPU2
[191040.524611] IRQ 122: no longer affine to CPU2
[191040.525616] smpboot: CPU 2 is now offline
[191040.544580] IRQ 1: no longer affine to CPU3
[191040.544582] IRQ 9: no longer affine to CPU3
[191040.544589] IRQ 12: no longer affine to CPU3
[191040.544592] IRQ 123: no longer affine to CPU3
[191040.545591] smpboot: CPU 3 is now offline
[191040.548223] ACPI: Low-level resume complete
[191040.548338] ACPI: EC: EC started
[191040.548338] PM: Restoring platform NVS memory
[191040.549091] Enabling non-boot CPUs ...
[191040.549155] x86: Booting SMP configuration:
[191040.549156] smpboot: Booting Node 0 Processor 1 APIC 0x2
[191040.707660]  cache: parent cpu1 should not be sleeping
[191040.707784] CPU1 is up
[191040.707812] smpboot: Booting Node 0 Processor 2 APIC 0x1
[191040.867658]  cache: parent cpu2 should not be sleeping
[191040.867800] CPU2 is up
[191040.867825] smpboot: Booting Node 0 Processor 3 APIC 0x3
[191041.027659]  cache: parent cpu3 should not be sleeping
[191041.027804] CPU3 is up
[191041.030891] ACPI: Waking up from system sleep state S3
[191041.813491] sd 0:0:0:0: [sda] Starting disk
[191041.815829] ACPI: EC: event unblocked
[191041.829894] r8169 0000:04:00.0 enp4s0: link down
[191042.103919] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[191042.127270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[191042.129029] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[191042.129031] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[191042.129691] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[191042.130545] ata1.00: supports DRM functions and may not be fully accessible
[191042.135774] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[191042.135775] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[191042.136431] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[191042.137296] ata1.00: supports DRM functions and may not be fully accessible
[191042.140724] ata1.00: configured for UDMA/133
[191042.379809] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[191042.725874] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[191042.770203] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[191042.963218] acpi LNXPOWER:02: Turning OFF
[191042.969873] OOM killer enabled.
[191042.969874] Restarting tasks ... done.
[191042.979203] [drm] RC6 on
[191043.110737] bbswitch: disabling discrete graphics
[191043.199672] PM: suspend exit
[191043.255204] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[191043.269659] r8169 0000:04:00.0 enp4s0: link down
[191043.269775] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[191043.270269] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[191044.910227] r8169 0000:04:00.0 enp4s0: link up
[191044.910234] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[203655.817780] PM: suspend entry (deep)
[203655.817782] PM: Syncing filesystems ... done.
[203655.841910] bbswitch: enabling discrete graphics
[203655.911941] Freezing user space processes ... (elapsed 0.001 seconds) done.
[203655.913891] OOM killer disabled.
[203655.913892] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[203655.915109] Suspending console(s) (use no_console_suspend to debug)
[203656.103506] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[203656.105547] sd 0:0:0:0: [sda] Stopping disk
[203657.519764] ACPI: Preparing to enter system sleep state S3
[203657.799517] ACPI: EC: event blocked
[203657.799517] ACPI: EC: EC stopped
[203657.799518] PM: Saving platform NVS memory
[203657.799521] Disabling non-boot CPUs ...
[203657.815639] IRQ 121: no longer affine to CPU1
[203657.816641] smpboot: CPU 1 is now offline
[203657.835616] IRQ 120: no longer affine to CPU2
[203657.835618] IRQ 122: no longer affine to CPU2
[203657.836860] smpboot: CPU 2 is now offline
[203657.859586] IRQ 1: no longer affine to CPU3
[203657.859588] IRQ 9: no longer affine to CPU3
[203657.859595] IRQ 12: no longer affine to CPU3
[203657.859598] IRQ 123: no longer affine to CPU3
[203657.860597] smpboot: CPU 3 is now offline
[203657.863228] ACPI: Low-level resume complete
[203657.863342] ACPI: EC: EC started
[203657.863343] PM: Restoring platform NVS memory
[203657.864097] Enabling non-boot CPUs ...
[203657.864160] x86: Booting SMP configuration:
[203657.864160] smpboot: Booting Node 0 Processor 1 APIC 0x2
[203658.022664]  cache: parent cpu1 should not be sleeping
[203658.022786] CPU1 is up
[203658.022807] smpboot: Booting Node 0 Processor 2 APIC 0x1
[203658.182662]  cache: parent cpu2 should not be sleeping
[203658.182803] CPU2 is up
[203658.182823] smpboot: Booting Node 0 Processor 3 APIC 0x3
[203658.346657]  cache: parent cpu3 should not be sleeping
[203658.346803] CPU3 is up
[203658.349869] ACPI: Waking up from system sleep state S3
[203659.128722] ACPI: EC: event unblocked
[203659.132653] sd 0:0:0:0: [sda] Starting disk
[203659.144874] r8169 0000:04:00.0 enp4s0: link down
[203659.419136] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[203659.442835] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[203659.444611] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[203659.444613] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[203659.445283] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[203659.446165] ata1.00: supports DRM functions and may not be fully accessible
[203659.451321] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[203659.451323] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[203659.451953] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[203659.452783] ata1.00: supports DRM functions and may not be fully accessible
[203659.456184] ata1.00: configured for UDMA/133
[203659.694934] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[203660.029281] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[203660.079320] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[203660.268102] acpi LNXPOWER:02: Turning OFF
[203660.280186] OOM killer enabled.
[203660.280188] Restarting tasks ... done.
[203660.288640] [drm] RC6 on
[203660.416244] bbswitch: disabling discrete graphics
[203660.534716] PM: suspend exit
[203660.593627] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[203660.608681] r8169 0000:04:00.0 enp4s0: link down
[203660.608779] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[203660.609232] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[203662.238995] r8169 0000:04:00.0 enp4s0: link up
[203662.239002] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[215586.429602] r8169 0000:04:00.0 enp4s0: link down
[215588.051203] r8169 0000:04:00.0 enp4s0: link up
[228364.685800] PM: suspend entry (deep)
[228364.685801] PM: Syncing filesystems ... done.
[228364.702412] bbswitch: enabling discrete graphics
[228364.772119] Freezing user space processes ... (elapsed 0.001 seconds) done.
[228364.774110] OOM killer disabled.
[228364.774110] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[228364.775342] Suspending console(s) (use no_console_suspend to debug)
[228364.971823] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[228364.972921] sd 0:0:0:0: [sda] Stopping disk
[228366.379972] ACPI: Preparing to enter system sleep state S3
[228366.659731] ACPI: EC: event blocked
[228366.659731] ACPI: EC: EC stopped
[228366.659732] PM: Saving platform NVS memory
[228366.659735] Disabling non-boot CPUs ...
[228366.676851] smpboot: CPU 1 is now offline
[228366.699830] IRQ 120: no longer affine to CPU2
[228366.699832] IRQ 121: no longer affine to CPU2
[228366.699833] IRQ 122: no longer affine to CPU2
[228366.700836] smpboot: CPU 2 is now offline
[228366.723793] IRQ 1: no longer affine to CPU3
[228366.723795] IRQ 9: no longer affine to CPU3
[228366.723802] IRQ 12: no longer affine to CPU3
[228366.723805] IRQ 123: no longer affine to CPU3
[228366.724804] smpboot: CPU 3 is now offline
[228366.727418] ACPI: Low-level resume complete
[228366.727532] ACPI: EC: EC started
[228366.727532] PM: Restoring platform NVS memory
[228366.728293] Enabling non-boot CPUs ...
[228366.728358] x86: Booting SMP configuration:
[228366.728358] smpboot: Booting Node 0 Processor 1 APIC 0x2
[228366.886883]  cache: parent cpu1 should not be sleeping
[228366.887009] CPU1 is up
[228366.887035] smpboot: Booting Node 0 Processor 2 APIC 0x1
[228367.046880]  cache: parent cpu2 should not be sleeping
[228367.047018] CPU2 is up
[228367.047037] smpboot: Booting Node 0 Processor 3 APIC 0x3
[228367.210879]  cache: parent cpu3 should not be sleeping
[228367.211025] CPU3 is up
[228367.214117] ACPI: Waking up from system sleep state S3
[228367.997096] ACPI: EC: event unblocked
[228367.997161] sd 0:0:0:0: [sda] Starting disk
[228368.013084] r8169 0000:04:00.0 enp4s0: link down
[228368.287372] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[228368.315316] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[228368.317094] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[228368.317096] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[228368.317750] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[228368.318616] ata1.00: supports DRM functions and may not be fully accessible
[228368.323869] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[228368.323870] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[228368.324510] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[228368.325370] ata1.00: supports DRM functions and may not be fully accessible
[228368.328722] ata1.00: configured for UDMA/133
[228368.563271] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[228368.970464] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[228369.013678] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[228369.202136] acpi LNXPOWER:02: Turning OFF
[228369.213563] OOM killer enabled.
[228369.213563] Restarting tasks ... done.
[228369.220372] [drm] RC6 on
[228369.353909] bbswitch: disabling discrete graphics
[228369.466900] PM: suspend exit
[228369.538257] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[228369.552900] r8169 0000:04:00.0 enp4s0: link down
[228369.553016] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[228369.553633] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[228371.194174] r8169 0000:04:00.0 enp4s0: link up
[228371.194181] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[276029.648941] PM: suspend entry (deep)
[276029.648942] PM: Syncing filesystems ... done.
[276029.667708] bbswitch: enabling discrete graphics
[276029.739157] Freezing user space processes ... (elapsed 0.001 seconds) done.
[276029.740978] OOM killer disabled.
[276029.740978] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[276029.742145] Suspending console(s) (use no_console_suspend to debug)
[276029.938719] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[276029.940105] sd 0:0:0:0: [sda] Stopping disk
[276031.367002] ACPI: Preparing to enter system sleep state S3
[276031.646761] ACPI: EC: event blocked
[276031.646761] ACPI: EC: EC stopped
[276031.646761] PM: Saving platform NVS memory
[276031.646765] Disabling non-boot CPUs ...
[276031.662871] IRQ 121: no longer affine to CPU1
[276031.663873] smpboot: CPU 1 is now offline
[276031.686861] IRQ 120: no longer affine to CPU2
[276031.686863] IRQ 122: no longer affine to CPU2
[276031.687866] smpboot: CPU 2 is now offline
[276031.710822] IRQ 1: no longer affine to CPU3
[276031.710824] IRQ 9: no longer affine to CPU3
[276031.710831] IRQ 12: no longer affine to CPU3
[276031.710834] IRQ 123: no longer affine to CPU3
[276031.711833] smpboot: CPU 3 is now offline
[276031.714451] ACPI: Low-level resume complete
[276031.714566] ACPI: EC: EC started
[276031.714566] PM: Restoring platform NVS memory
[276031.715326] Enabling non-boot CPUs ...
[276031.715368] x86: Booting SMP configuration:
[276031.715369] smpboot: Booting Node 0 Processor 1 APIC 0x2
[276031.777917]  cache: parent cpu1 should not be sleeping
[276031.778054] CPU1 is up
[276031.778075] smpboot: Booting Node 0 Processor 2 APIC 0x1
[276031.841910]  cache: parent cpu2 should not be sleeping
[276031.842050] CPU2 is up
[276031.842071] smpboot: Booting Node 0 Processor 3 APIC 0x3
[276031.909912]  cache: parent cpu3 should not be sleeping
[276031.910055] CPU3 is up
[276031.913118] ACPI: Waking up from system sleep state S3
[276032.700222] sd 0:0:0:0: [sda] Starting disk
[276032.700392] ACPI: EC: event unblocked
[276032.716118] r8169 0000:04:00.0 enp4s0: link down
[276032.946185] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[276033.014177] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[276033.015947] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[276033.015949] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[276033.016581] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[276033.017428] ata1.00: supports DRM functions and may not be fully accessible
[276033.022573] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[276033.022575] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[276033.023208] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[276033.024047] ata1.00: supports DRM functions and may not be fully accessible
[276033.027344] ata1.00: configured for UDMA/133
[276033.222138] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[276033.562036] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[276033.610628] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[276034.282145] [drm] RC6 on
[276035.659307] acpi LNXPOWER:02: Turning OFF
[276035.665861] OOM killer enabled.
[276035.665862] Restarting tasks ... 
[276035.665910] usb 1-3: USB disconnect, device number 2
[276035.667331] done.
[276035.817704] bbswitch: disabling discrete graphics
[276035.909970] PM: suspend exit
[276035.990348] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[276036.007905] r8169 0000:04:00.0 enp4s0: link down
[276036.008184] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[276036.008794] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[276036.066760] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
[276123.341045] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[276123.389194] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[276133.016345] wlp5s0: authenticate with 00:08:2f:3b:fd:df
[276133.056193] wlp5s0: send auth to 00:08:2f:3b:fd:df (try 1/3)
[276133.057019] wlp5s0: authenticated
[276133.061868] wlp5s0: associate with 00:08:2f:3b:fd:df (try 1/3)
[276133.063748] wlp5s0: RX AssocResp from 00:08:2f:3b:fd:df (capab=0x1 status=0 aid=86)
[276133.065683] wlp5s0: associated
[276133.066065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[276133.076279] ath: EEPROM regdomain: 0x809c
[276133.076280] ath: EEPROM indicates we should expect a country code
[276133.076281] ath: doing EEPROM country->regdmn map search
[276133.076282] ath: country maps to regdmn code: 0x52
[276133.076282] ath: Country alpha2 being used: CN
[276133.076282] ath: Regpair used: 0x52
[276133.076283] ath: regdomain 0x809c dynamically updated by country IE
[276133.142046] wlp5s0: Limiting TX power to 17 dBm as advertised by 00:08:2f:3b:fd:df
[282978.974195] wlp5s0: deauthenticating from 00:08:2f:3b:fd:df by local choice (Reason: 3=DEAUTH_LEAVING)
[282984.025034] PM: suspend entry (deep)
[282984.025035] PM: Syncing filesystems ... done.
[282984.166934] bbswitch: enabling discrete graphics
[282984.167096] pci 0000:01:00.0: Refused to change power state, currently in D3
[282984.238526] pci 0000:01:00.0: Refused to change power state, currently in D3
[282984.238594] Freezing user space processes ... (elapsed 0.001 seconds) done.
[282984.240292] OOM killer disabled.
[282984.240292] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[282984.241466] Suspending console(s) (use no_console_suspend to debug)
[282984.422909] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[282984.429764] sd 0:0:0:0: [sda] Stopping disk
[282985.843101] ACPI: Preparing to enter system sleep state S3
[282986.122870] ACPI: EC: event blocked
[282986.122870] ACPI: EC: EC stopped
[282986.122870] PM: Saving platform NVS memory
[282986.122873] Disabling non-boot CPUs ...
[282986.138986] IRQ fixup: irq 126 move in progress, old vector 33
[282986.138998] IRQ 126: no longer affine to CPU1
[282986.140244] smpboot: CPU 1 is now offline
[282986.162938] IRQ 121: no longer affine to CPU2
[282986.163939] smpboot: CPU 2 is now offline
[282986.186951] IRQ 1: no longer affine to CPU3
[282986.186954] IRQ 9: no longer affine to CPU3
[282986.186961] IRQ 12: no longer affine to CPU3
[282986.186964] IRQ 123: no longer affine to CPU3
[282986.187967] smpboot: CPU 3 is now offline
[282986.190624] ACPI: Low-level resume complete
[282986.190739] ACPI: EC: EC started
[282986.190739] PM: Restoring platform NVS memory
[282986.191493] Enabling non-boot CPUs ...
[282986.191535] x86: Booting SMP configuration:
[282986.191536] smpboot: Booting Node 0 Processor 1 APIC 0x2
[282986.254022]  cache: parent cpu1 should not be sleeping
[282986.254159] CPU1 is up
[282986.254185] smpboot: Booting Node 0 Processor 2 APIC 0x1
[282986.318019]  cache: parent cpu2 should not be sleeping
[282986.318160] CPU2 is up
[282986.318190] smpboot: Booting Node 0 Processor 3 APIC 0x3
[282986.386021]  cache: parent cpu3 should not be sleeping
[282986.386160] CPU3 is up
[282986.389224] ACPI: Waking up from system sleep state S3
[282987.166311] pci 0000:01:00.0: Refused to change power state, currently in D3
[282987.182661] pci 0000:01:00.0: Refused to change power state, currently in D3
[282987.182936] ACPI: EC: event unblocked
[282987.186364] sd 0:0:0:0: [sda] Starting disk
[282987.200357] r8169 0000:04:00.0 enp4s0: link down
[282987.418295] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[282987.497797] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[282987.499539] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[282987.499540] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[282987.500178] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[282987.501033] ata1.00: supports DRM functions and may not be fully accessible
[282987.506234] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[282987.506236] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[282987.506891] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[282987.507752] ata1.00: supports DRM functions and may not be fully accessible
[282987.511156] ata1.00: configured for UDMA/133
[282987.694370] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[282988.046206] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[282988.088246] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[282988.267331] acpi LNXPOWER:02: Turning OFF
[282988.273919] OOM killer enabled.
[282988.273920] Restarting tasks ... done.
[282988.280090] [drm] RC6 on
[282988.546091] PM: suspend exit
[282988.598645] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[282988.676911] r8169 0000:04:00.0 enp4s0: link down
[282988.676992] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[282988.677751] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[282989.326045] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[282989.369431] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[282998.995988] wlp5s0: authenticate with 7c:0e:ce:70:97:df
[282999.040049] wlp5s0: send auth to 7c:0e:ce:70:97:df (try 1/3)
[282999.042253] wlp5s0: authenticated
[282999.050253] wlp5s0: associate with 7c:0e:ce:70:97:df (try 1/3)
[282999.052458] wlp5s0: RX AssocResp from 7c:0e:ce:70:97:df (capab=0x1 status=0 aid=21)
[282999.054525] wlp5s0: associated
[282999.055503] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[282999.057743] ath: EEPROM regdomain: 0x809c
[282999.057744] ath: EEPROM indicates we should expect a country code
[282999.057744] ath: doing EEPROM country->regdmn map search
[282999.057745] ath: country maps to regdmn code: 0x52
[282999.057745] ath: Country alpha2 being used: CN
[282999.057746] ath: Regpair used: 0x52
[282999.057746] ath: regdomain 0x809c dynamically updated by country IE
[282999.066674] wlp5s0: Limiting TX power to 23 dBm as advertised by 7c:0e:ce:70:97:df
[284627.152175] wlp5s0: deauthenticating from 7c:0e:ce:70:97:df by local choice (Reason: 3=DEAUTH_LEAVING)
[284632.275405] PM: suspend entry (deep)
[284632.275406] PM: Syncing filesystems ... done.
[284632.426711] bbswitch: enabling discrete graphics
[284632.426752] pci 0000:01:00.0: Refused to change power state, currently in D3
[284632.426771] Freezing user space processes ... (elapsed 0.001 seconds) done.
[284632.428689] OOM killer disabled.
[284632.428689] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[284632.429915] Suspending console(s) (use no_console_suspend to debug)
[284632.590672] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[284632.597406] sd 0:0:0:0: [sda] Stopping disk
[284634.002939] ACPI: Preparing to enter system sleep state S3
[284634.282694] ACPI: EC: event blocked
[284634.282694] ACPI: EC: EC stopped
[284634.282695] PM: Saving platform NVS memory
[284634.282698] Disabling non-boot CPUs ...
[284634.298796] IRQ fixup: irq 126 move in progress, old vector 33
[284634.298808] IRQ 126: no longer affine to CPU1
[284634.299811] smpboot: CPU 1 is now offline
[284634.318779] IRQ 121: no longer affine to CPU2
[284634.319780] smpboot: CPU 2 is now offline
[284634.342757] IRQ 1: no longer affine to CPU3
[284634.342759] IRQ 9: no longer affine to CPU3
[284634.342766] IRQ 12: no longer affine to CPU3
[284634.342770] IRQ 123: no longer affine to CPU3
[284634.343770] smpboot: CPU 3 is now offline
[284634.346383] ACPI: Low-level resume complete
[284634.346497] ACPI: EC: EC started
[284634.346498] PM: Restoring platform NVS memory
[284634.347248] Enabling non-boot CPUs ...
[284634.347301] x86: Booting SMP configuration:
[284634.347302] smpboot: Booting Node 0 Processor 1 APIC 0x2
[284634.505837]  cache: parent cpu1 should not be sleeping
[284634.505966] CPU1 is up
[284634.505992] smpboot: Booting Node 0 Processor 2 APIC 0x1
[284634.665834]  cache: parent cpu2 should not be sleeping
[284634.665974] CPU2 is up
[284634.665994] smpboot: Booting Node 0 Processor 3 APIC 0x3
[284634.829832]  cache: parent cpu3 should not be sleeping
[284634.829975] CPU3 is up
[284634.833039] ACPI: Waking up from system sleep state S3
[284635.610071] pci 0000:01:00.0: Refused to change power state, currently in D3
[284635.616685] pci 0000:01:00.0: Refused to change power state, currently in D3
[284635.617104] ACPI: EC: event unblocked
[284635.617153] sd 0:0:0:0: [sda] Starting disk
[284635.632001] r8169 0000:04:00.0 enp4s0: link down
[284635.849909] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[284635.933238] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[284635.935011] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[284635.935012] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[284635.935671] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[284635.936579] ata1.00: supports DRM functions and may not be fully accessible
[284635.941836] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[284635.941838] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[284635.942491] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[284635.943371] ata1.00: supports DRM functions and may not be fully accessible
[284635.946814] ata1.00: configured for UDMA/133
[284636.126235] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[284636.509531] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[284636.559170] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[284636.744274] acpi LNXPOWER:02: Turning OFF
[284636.759258] OOM killer enabled.
[284636.759260] Restarting tasks ... done.
[284636.769634] [drm] RC6 on
[284636.900429] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[284636.922597] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
[284637.045822] PM: suspend exit
[284637.070753] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[284637.087819] r8169 0000:04:00.0 enp4s0: link down
[284637.087921] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[284637.088715] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[284637.734339] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[284637.781344] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[284645.109586] usb 1-3: new low-speed USB device number 5 using xhci_hcd
[284645.260525] usb 1-3: New USB device found, idVendor=275d, idProduct=0ba6
[284645.260527] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[284645.260528] usb 1-3: Product: USB OPTICAL MOUSE 
[284645.262690] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:275D:0BA6.0004/input/input23
[284645.262835] hid-generic 0003:275D:0BA6.0004: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-3/input0
[284647.407436] wlp5s0: authenticate with a8:58:40:d6:42:c0
[284647.447716] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[284647.449737] wlp5s0: a8:58:40:d6:42:c0 denied authentication (status 17)
[284647.977706] wlp5s0: authenticate with a8:58:40:d6:42:d0
[284648.017642] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[284648.018486] wlp5s0: authenticated
[284648.021557] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[284648.027066] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=1)
[284648.029149] wlp5s0: associated
[284648.029340] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[284648.032748] ath: EEPROM regdomain: 0x809c
[284648.032749] ath: EEPROM indicates we should expect a country code
[284648.032750] ath: doing EEPROM country->regdmn map search
[284648.032750] ath: country maps to regdmn code: 0x52
[284648.032751] ath: Country alpha2 being used: CN
[284648.032752] ath: Regpair used: 0x52
[284648.032753] ath: regdomain 0x809c dynamically updated by country IE
[284648.062439] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[289042.707356] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:f0
[289042.714169] wlp5s0: authenticate with a8:58:40:d6:42:f0
[289042.757421] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[289042.758984] wlp5s0: authenticated
[289042.763656] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[289042.772518] wlp5s0: RX ReassocResp from a8:58:40:d6:42:f0 (capab=0x1401 status=0 aid=1)
[289042.774434] wlp5s0: associated
[289042.777855] ath: EEPROM regdomain: 0x809c
[289042.777855] ath: EEPROM indicates we should expect a country code
[289042.777856] ath: doing EEPROM country->regdmn map search
[289042.777856] ath: country maps to regdmn code: 0x52
[289042.777857] ath: Country alpha2 being used: CN
[289042.777857] ath: Regpair used: 0x52
[289042.777858] ath: regdomain 0x809c dynamically updated by country IE
[289042.976899] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:f0
[289162.721634] wlp5s0: disconnect from AP a8:58:40:d6:42:f0 for new auth to a8:58:40:d6:42:d0
[289162.728157] wlp5s0: authenticate with a8:58:40:d6:42:d0
[289162.767743] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[289162.768684] wlp5s0: authenticated
[289162.771577] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[289162.776393] wlp5s0: RX ReassocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=1)
[289162.778180] wlp5s0: associated
[289162.781805] ath: EEPROM regdomain: 0x809c
[289162.781807] ath: EEPROM indicates we should expect a country code
[289162.781807] ath: doing EEPROM country->regdmn map search
[289162.781808] ath: country maps to regdmn code: 0x52
[289162.781808] ath: Country alpha2 being used: CN
[289162.781809] ath: Regpair used: 0x52
[289162.781810] ath: regdomain 0x809c dynamically updated by country IE
[289162.805812] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[306776.067168] container_test[15466]: segfault at 48 ip 00005561df0af895 sp 00007fffe3ae2260 error 4 in container_test[5561df09d000+3d000]
[308304.449043] container_test[18795]: segfault at 48 ip 000055aa37742895 sp 00007ffd6e45a000 error 4 in container_test[55aa37730000+3d000]
[308605.372300] container_test[19245]: segfault at 38 ip 000055db911e16fb sp 00007ffe5c761950 error 4 in container_test[55db911d0000+3c000]
[308968.869903] assign_test[19973]: segfault at 48 ip 00005601c340b82f sp 00007ffca23468c0 error 4 in assign_test[5601c33f9000+3d000]
[311693.409853] r8169 0000:04:00.0 enp4s0: link up
[311693.409860] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[311715.223968] wlp5s0: deauthenticating from a8:58:40:d6:42:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[312196.455687] r8169 0000:04:00.0 enp4s0: link down
[312198.098260] r8169 0000:04:00.0 enp4s0: link up
[315874.111724] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[315874.167764] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[315883.792761] wlp5s0: authenticate with a8:58:40:d6:42:d0
[315883.833356] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[315883.834587] wlp5s0: authenticated
[315883.836705] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[315883.841474] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=1)
[315883.843497] wlp5s0: associated
[315883.843709] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[315883.846875] ath: EEPROM regdomain: 0x809c
[315883.846876] ath: EEPROM indicates we should expect a country code
[315883.846877] ath: doing EEPROM country->regdmn map search
[315883.846877] ath: country maps to regdmn code: 0x52
[315883.846878] ath: Country alpha2 being used: CN
[315883.846878] ath: Regpair used: 0x52
[315883.846879] ath: regdomain 0x809c dynamically updated by country IE
[315883.856604] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[315896.653961] r8169 0000:04:00.0 enp4s0: link down
[316558.717627] wlp5s0: disconnect from AP a8:58:40:d6:42:d0 for new auth to a8:58:40:d6:42:e0
[316558.724093] wlp5s0: authenticate with a8:58:40:d6:42:e0
[316558.764002] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[316558.768002] wlp5s0: authenticated
[316558.770377] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[316558.779439] wlp5s0: RX ReassocResp from a8:58:40:d6:42:e0 (capab=0x1421 status=0 aid=2)
[316558.781814] wlp5s0: associated
[316558.785564] ath: EEPROM regdomain: 0x809c
[316558.785565] ath: EEPROM indicates we should expect a country code
[316558.785565] ath: doing EEPROM country->regdmn map search
[316558.785566] ath: country maps to regdmn code: 0x52
[316558.785567] ath: Country alpha2 being used: CN
[316558.785567] ath: Regpair used: 0x52
[316558.785568] ath: regdomain 0x809c dynamically updated by country IE
[316558.877908] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[316729.581727] bbswitch: enabling discrete graphics
[316729.581741] pci 0000:01:00.0: Refused to change power state, currently in D3
[316740.664521] bbswitch: enabling discrete graphics
[316740.664533] pci 0000:01:00.0: Refused to change power state, currently in D3
[316768.659283] wlp5s0: deauthenticated from a8:58:40:d6:42:e0 (Reason: 2=PREV_AUTH_NOT_VALID)
[316769.204478] wlp5s0: authenticate with a8:58:40:d6:42:d0
[316769.244495] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[316769.245334] wlp5s0: authenticated
[316769.245794] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[316769.250688] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=0 aid=1)
[316769.253095] wlp5s0: associated
[316769.255874] ath: EEPROM regdomain: 0x809c
[316769.255875] ath: EEPROM indicates we should expect a country code
[316769.255875] ath: doing EEPROM country->regdmn map search
[316769.255876] ath: country maps to regdmn code: 0x52
[316769.255876] ath: Country alpha2 being used: CN
[316769.255877] ath: Regpair used: 0x52
[316769.255877] ath: regdomain 0x809c dynamically updated by country IE
[316769.334076] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:d0
[316881.139177] bbswitch: enabling discrete graphics
[316881.139189] pci 0000:01:00.0: Refused to change power state, currently in D3
[316889.980680] wlp5s0: disassociated from a8:58:40:d6:42:d0 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[316890.277391] wlp5s0: authenticate with a8:58:40:d6:42:f0
[316890.321069] wlp5s0: send auth to a8:58:40:d6:42:f0 (try 1/3)
[316890.321979] wlp5s0: authenticated
[316890.325554] wlp5s0: associate with a8:58:40:d6:42:f0 (try 1/3)
[316890.328793] wlp5s0: associate with a8:58:40:d6:42:f0 (try 2/3)
[316890.335394] wlp5s0: RX AssocResp from a8:58:40:d6:42:f0 (capab=0x1401 status=0 aid=2)
[316890.337865] wlp5s0: associated
[316890.340847] ath: EEPROM regdomain: 0x809c
[316890.340848] ath: EEPROM indicates we should expect a country code
[316890.340849] ath: doing EEPROM country->regdmn map search
[316890.340849] ath: country maps to regdmn code: 0x52
[316890.340850] ath: Country alpha2 being used: CN
[316890.340850] ath: Regpair used: 0x52
[316890.340851] ath: regdomain 0x809c dynamically updated by country IE
[316890.384645] wlp5s0: Limiting TX power to 30 (33 - 3) dBm as advertised by a8:58:40:d6:42:f0
[316918.554647] wlp5s0: disconnect from AP a8:58:40:d6:42:f0 for new auth to a8:58:40:d6:3b:c0
[316918.561124] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[316918.601212] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[316918.603245] wlp5s0: authenticated
[316918.605503] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[316918.617388] wlp5s0: RX ReassocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=0 aid=2)
[316918.619471] wlp5s0: associated
[316918.622778] ath: EEPROM regdomain: 0x809c
[316918.622779] ath: EEPROM indicates we should expect a country code
[316918.622780] ath: doing EEPROM country->regdmn map search
[316918.622780] ath: country maps to regdmn code: 0x52
[316918.622781] ath: Country alpha2 being used: CN
[316918.622781] ath: Regpair used: 0x52
[316918.622782] ath: regdomain 0x809c dynamically updated by country IE
[316918.763068] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:3b:c0
[317038.600835] wlp5s0: disconnect from AP a8:58:40:d6:3b:c0 for new auth to a8:58:40:d6:42:c0
[317038.607716] wlp5s0: authenticate with a8:58:40:d6:42:c0
[317038.647917] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[317038.649804] wlp5s0: a8:58:40:d6:42:c0 denied authentication (status 17)
[317039.025890] wlp5s0: authenticate with a8:58:40:d6:3b:c0
[317039.065789] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 1/3)
[317039.071438] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 2/3)
[317039.076412] wlp5s0: send auth to a8:58:40:d6:3b:c0 (try 3/3)
[317039.077655] wlp5s0: authenticated
[317039.081131] wlp5s0: associate with a8:58:40:d6:3b:c0 (try 1/3)
[317039.095035] wlp5s0: RX ReassocResp from a8:58:40:d6:3b:c0 (capab=0x1421 status=0 aid=2)
[317039.097193] wlp5s0: associated
[317039.100002] ath: EEPROM regdomain: 0x809c
[317039.100002] ath: EEPROM indicates we should expect a country code
[317039.100003] ath: doing EEPROM country->regdmn map search
[317039.100003] ath: country maps to regdmn code: 0x52
[317039.100004] ath: Country alpha2 being used: CN
[317039.100004] ath: Regpair used: 0x52
[317039.100005] ath: regdomain 0x809c dynamically updated by country IE
[317039.492061] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:3b:c0
[317158.676668] wlp5s0: disassociated from a8:58:40:d6:3b:c0 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[317158.720730] wlp5s0: authenticate with a8:58:40:d6:5e:20
[317158.761117] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 1/3)
[317158.765780] wlp5s0: send auth to a8:58:40:d6:5e:20 (try 2/3)
[317158.771772] wlp5s0: authenticated
[317158.772867] wlp5s0: associate with a8:58:40:d6:5e:20 (try 1/3)
[317158.782222] wlp5s0: associate with a8:58:40:d6:5e:20 (try 2/3)
[317158.791517] wlp5s0: associate with a8:58:40:d6:5e:20 (try 3/3)
[317158.802563] wlp5s0: RX AssocResp from a8:58:40:d6:5e:20 (capab=0x1421 status=0 aid=2)
[317158.804866] wlp5s0: associated
[317158.807912] ath: EEPROM regdomain: 0x809c
[317158.807913] ath: EEPROM indicates we should expect a country code
[317158.807913] ath: doing EEPROM country->regdmn map search
[317158.807914] ath: country maps to regdmn code: 0x52
[317158.807914] ath: Country alpha2 being used: CN
[317158.807914] ath: Regpair used: 0x52
[317158.807915] ath: regdomain 0x809c dynamically updated by country IE
[317159.071582] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:5e:20
[317253.435755] bbswitch: enabling discrete graphics
[317253.435771] pci 0000:01:00.0: Refused to change power state, currently in D3
[317259.022508] bbswitch: enabling discrete graphics
[317259.022520] pci 0000:01:00.0: Refused to change power state, currently in D3
[317278.583048] wlp5s0: disassociated from a8:58:40:d6:5e:20 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[317278.620935] wlp5s0: authenticate with a8:58:40:d6:42:d0
[317278.660786] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[317278.661734] wlp5s0: authenticated
[317278.664584] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[317278.669221] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[317278.669224] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[317279.798300] wlp5s0: authenticate with a8:58:40:d6:42:e0
[317279.838218] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[317279.843213] wlp5s0: authenticated
[317279.844615] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[317279.854706] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1421 status=0 aid=2)
[317279.856597] wlp5s0: associated
[317279.859899] ath: EEPROM regdomain: 0x809c
[317279.859899] ath: EEPROM indicates we should expect a country code
[317279.859900] ath: doing EEPROM country->regdmn map search
[317279.859900] ath: country maps to regdmn code: 0x52
[317279.859901] ath: Country alpha2 being used: CN
[317279.859901] ath: Regpair used: 0x52
[317279.859902] ath: regdomain 0x809c dynamically updated by country IE
[317279.890541] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[317366.981483] wlp5s0: deauthenticating from a8:58:40:d6:42:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
[317371.806916] wlp5s0: authenticate with a8:58:40:d6:42:c0
[317371.846663] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[317371.854851] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 2/3)
[317371.865093] wlp5s0: authenticated
[317371.868376] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[317371.879348] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1421 status=8 aid=0)
[317371.879350] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[317372.109329] wlp5s0: authenticate with a8:58:40:d6:42:e0
[317372.149078] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[317372.155791] wlp5s0: authenticated
[317372.156371] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[317372.164155] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1421 status=0 aid=2)
[317372.166318] wlp5s0: associated
[317372.169090] ath: EEPROM regdomain: 0x809c
[317372.169091] ath: EEPROM indicates we should expect a country code
[317372.169091] ath: doing EEPROM country->regdmn map search
[317372.169092] ath: country maps to regdmn code: 0x52
[317372.169092] ath: Country alpha2 being used: CN
[317372.169093] ath: Regpair used: 0x52
[317372.169093] ath: regdomain 0x809c dynamically updated by country IE
[317372.255537] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[317394.388714] wlp5s0: deauthenticating from a8:58:40:d6:42:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
[317399.212768] wlp5s0: authenticate with a8:58:40:d6:42:d1
[317399.252485] wlp5s0: send auth to a8:58:40:d6:42:d1 (try 1/3)
[317399.253311] wlp5s0: authenticated
[317399.256317] wlp5s0: associate with a8:58:40:d6:42:d1 (try 1/3)
[317399.257433] wlp5s0: RX AssocResp from a8:58:40:d6:42:d1 (capab=0x1401 status=8 aid=0)
[317399.257437] wlp5s0: a8:58:40:d6:42:d1 denied association (code=8)
[317404.187428] wlp5s0: authenticate with a8:58:40:d6:42:d1
[317404.226718] wlp5s0: send auth to a8:58:40:d6:42:d1 (try 1/3)
[317404.227681] wlp5s0: authenticated
[317404.232303] wlp5s0: associate with a8:58:40:d6:42:d1 (try 1/3)
[317404.233343] wlp5s0: RX AssocResp from a8:58:40:d6:42:d1 (capab=0x1401 status=8 aid=0)
[317404.233345] wlp5s0: a8:58:40:d6:42:d1 denied association (code=8)
[317410.066954] wlp5s0: authenticate with a8:58:40:d6:42:f1
[317410.110542] wlp5s0: send auth to a8:58:40:d6:42:f1 (try 1/3)
[317410.111773] wlp5s0: authenticated
[317410.112371] wlp5s0: associate with a8:58:40:d6:42:f1 (try 1/3)
[317410.115064] wlp5s0: associate with a8:58:40:d6:42:f1 (try 2/3)
[317410.117731] wlp5s0: associate with a8:58:40:d6:42:f1 (try 3/3)
[317410.120707] wlp5s0: association with a8:58:40:d6:42:f1 timed out
[317415.954973] wlp5s0: authenticate with a8:58:40:d6:42:d1
[317415.994762] wlp5s0: send auth to a8:58:40:d6:42:d1 (try 1/3)
[317415.995636] wlp5s0: authenticated
[317415.996274] wlp5s0: associate with a8:58:40:d6:42:d1 (try 1/3)
[317415.997757] wlp5s0: RX AssocResp from a8:58:40:d6:42:d1 (capab=0x1401 status=8 aid=0)
[317415.997759] wlp5s0: a8:58:40:d6:42:d1 denied association (code=8)
[317419.279018] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[317428.900555] wlp5s0: authenticate with a8:58:40:d6:42:d0
[317428.940252] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[317429.044262] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 2/3)
[317429.047796] wlp5s0: authenticated
[317429.048249] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[317429.049561] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[317429.049563] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[317439.381293] wlp5s0: authenticate with a8:58:40:d6:42:c0
[317439.421427] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[317439.423470] wlp5s0: authenticated
[317439.424305] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[317439.429798] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1421 status=8 aid=0)
[317439.429800] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[317449.275092] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[317458.898030] wlp5s0: authenticate with a8:58:40:d6:42:d0
[317458.938205] wlp5s0: send auth to a8:58:40:d6:42:d0 (try 1/3)
[317458.940409] wlp5s0: authenticated
[317458.944260] wlp5s0: associate with a8:58:40:d6:42:d0 (try 1/3)
[317458.945530] wlp5s0: RX AssocResp from a8:58:40:d6:42:d0 (capab=0x1401 status=8 aid=0)
[317458.945532] wlp5s0: a8:58:40:d6:42:d0 denied association (code=8)
[317462.663966] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[317467.372031] r8169 0000:04:00.0 enp4s0: link up
[317467.475588] wlp5s0: authenticate with a8:58:40:d6:42:c0
[317467.516081] wlp5s0: send auth to a8:58:40:d6:42:c0 (try 1/3)
[317467.524007] wlp5s0: authenticated
[317467.524182] wlp5s0: associate with a8:58:40:d6:42:c0 (try 1/3)
[317467.527698] wlp5s0: RX AssocResp from a8:58:40:d6:42:c0 (capab=0x1421 status=8 aid=0)
[317467.527700] wlp5s0: a8:58:40:d6:42:c0 denied association (code=8)
[317477.857086] wlp5s0: authenticate with a8:58:40:d6:42:e0
[317477.897186] wlp5s0: send auth to a8:58:40:d6:42:e0 (try 1/3)
[317477.899286] wlp5s0: authenticated
[317477.900233] wlp5s0: associate with a8:58:40:d6:42:e0 (try 1/3)
[317477.923827] wlp5s0: RX AssocResp from a8:58:40:d6:42:e0 (capab=0x1421 status=0 aid=2)
[317477.925595] wlp5s0: associated
[317477.925808] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[317477.928371] ath: EEPROM regdomain: 0x809c
[317477.928372] ath: EEPROM indicates we should expect a country code
[317477.928372] ath: doing EEPROM country->regdmn map search
[317477.928372] ath: country maps to regdmn code: 0x52
[317477.928373] ath: Country alpha2 being used: CN
[317477.928373] ath: Regpair used: 0x52
[317477.928374] ath: regdomain 0x809c dynamically updated by country IE
[317477.933096] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a8:58:40:d6:42:e0
[317539.736403] bbswitch: enabling discrete graphics
[317539.736416] pci 0000:01:00.0: Refused to change power state, currently in D3
[318117.042771] bbswitch: enabling discrete graphics
[318117.042785] pci 0000:01:00.0: Refused to change power state, currently in D3
[318127.295904] bbswitch: enabling discrete graphics
[318127.295917] pci 0000:01:00.0: Refused to change power state, currently in D3
[318803.929912] bbswitch: enabling discrete graphics
[318803.929924] pci 0000:01:00.0: Refused to change power state, currently in D3
[318998.435917] partition /tmp/BootInfo-PZiJYVLQ/sda5 [8, 5] added, comm[4900]: mount.ntfs
[318998.462490] sys_umount: /tmp/BootInfo-PZiJYVLQ/sda5, 8, 5
[318998.475007] partition /tmp/BootInfo-PZiJYVLQ/sda5 [8, 5] umounted
[319003.408746] r8169 0000:04:00.0: invalid short VPD tag 00 at offset 1
