[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: \\boot\vmlinuz-4.14.0-deepin2-amd64 root=UUID=59218e3f-c77f-46fa-ab16-c81227ddd6c5 ro splash quiet initrd=boot\initrd.img-4.14.0-deepin2-amd64
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008a99ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a9a0000-0x000000008aba1fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008aba2000-0x00000000d694efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d694f000-0x00000000dae9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xcb002018-0xcb012057] usable ==> usable
[    0.000000] e820: update [mem 0xcb002018-0xcb012057] usable ==> usable
[    0.000000] e820: update [mem 0xcaff1018-0xcb001657] usable ==> usable
[    0.000000] e820: update [mem 0xcaff1018-0xcb001657] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000090000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000008a99ffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008a9a0000-0x000000008aba1fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008aba2000-0x00000000caff1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000caff1018-0x00000000cb001657] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb001658-0x00000000cb002017] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb002018-0x00000000cb012057] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb012058-0x00000000d694efff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d694f000-0x00000000dae9efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041e5fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000041e600000-0x000000041effffff] reserved
[    0.000000] efi: EFI v2.31 by Lenovo
[    0.000000] efi:  ACPI 2.0=0xdaffe014  ACPI=0xdaffe000  SMBIOS=0xdae9e000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2394D48/2394D48, BIOS G4ETA5WW (2.65 ) 09/10/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask E00000000 write-back
[    0.000000]   8 base 400000000 mask FE0000000 write-back
[    0.000000]   9 base 41F000000 mask FFF000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff967c00054000] 54000 size 24576
[    0.000000] BRK [0x3d609000, 0x3d609fff] PGTABLE
[    0.000000] BRK [0x3d60a000, 0x3d60afff] PGTABLE
[    0.000000] BRK [0x3d60b000, 0x3d60bfff] PGTABLE
[    0.000000] BRK [0x3d60c000, 0x3d60cfff] PGTABLE
[    0.000000] BRK [0x3d60d000, 0x3d60dfff] PGTABLE
[    0.000000] BRK [0x3d60e000, 0x3d60efff] PGTABLE
[    0.000000] BRK [0x3d60f000, 0x3d60ffff] PGTABLE
[    0.000000] BRK [0x3d610000, 0x3d610fff] PGTABLE
[    0.000000] BRK [0x3d611000, 0x3d611fff] PGTABLE
[    0.000000] BRK [0x3d612000, 0x3d612fff] PGTABLE
[    0.000000] BRK [0x3d613000, 0x3d613fff] PGTABLE
[    0.000000] BRK [0x3d614000, 0x3d614fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7d29c000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFE8000 0104B1 (v01 LENOVO TP-G4    00002650 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G4    00002650 PTL  00000001)
[    0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFDC000 000CB5 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFD9000 0002A6 (v01 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G4    00002650 PTL  00000002)
[    0.000000] ACPI: DMI detected: Lenovo ThinkPad T530
[    0.000000] ACPI: DMI detected: Lenovo ThinkPad T530
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41e5ed000-0x41e5f1fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x000000008a99ffff]
[    0.000000]   node   0: [mem 0x000000008aba2000-0x00000000d694efff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[    0.000000] On node 0 totalpages: 4147932
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 91 pages reserved
[    0.000000]   DMA zone: 3983 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13654 pages used for memmap
[    0.000000]   DMA32 zone: 873805 pages, LIFO batch:31
[    0.000000]   Normal zone: 51096 pages used for memmap
[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a9a0000-0x8aba1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaff1000-0xcaff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb001000-0xcb001fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb002000-0xcb002fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb012000-0xcb012fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd694f000-0xdae9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff96801e200000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4083027
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: \\boot\vmlinuz-4.14.0-deepin2-amd64 root=UUID=59218e3f-c77f-46fa-ab16-c81227ddd6c5 ro splash quiet initrd=boot\initrd.img-4.14.0-deepin2-amd64
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16121292K/16591728K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 470436K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2593.960 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.92 BogoMIPS (lpj=10375840)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.016140] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.020159] Security Framework initialized
[    0.020161] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020188] AppArmor: AppArmor initialized
[    0.022496] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.023710] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023759] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.023799] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.024120] CPU: Physical Processor ID: 0
[    0.024121] CPU: Processor Core ID: 0
[    0.024126] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024127] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024130] mce: CPU supports 9 MCE banks
[    0.024138] CPU0: Thermal monitoring enabled (TM1)
[    0.024150] process: using mwait in idle threads
[    0.024153] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024154] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024154] Applying alternatives
[    0.024212] Applying alternatives done
[    0.024213] Applying alternatives smp done
[    0.024246] Freeing SMP alternatives memory: 28K
[    0.027455] smpboot: Max logical packages: 2
[    0.027460] DMAR: Host address width 36
[    0.027461] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.027469] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.027470] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.027474] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.027475] DMAR: RMRR base: 0x000000da3ba000 end: 0x000000da3d0fff
[    0.027476] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.027478] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.027479] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.027480] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.027748] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.027750] x2apic enabled
[    0.027754] Switched APIC routing to cluster x2apic.
[    0.028238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.067936] TSC deadline timer enabled
[    0.067939] smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.080016] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.080055] ... version:                3
[    0.080056] ... bit width:              48
[    0.080056] ... generic registers:      4
[    0.080057] ... value mask:             0000ffffffffffff
[    0.080057] ... max period:             00007fffffffffff
[    0.080058] ... fixed-purpose events:   3
[    0.080058] ... event mask:             000000070000000f
[    0.088006] Hierarchical SRCU implementation.
[    0.104203] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.112005] smp: Bringing up secondary CPUs ...
[    0.144053] x86: Booting SMP configuration:
[    0.144054] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.338736] smp: Brought up 1 node, 8 CPUs
[    0.338736] smpboot: Total of 8 processors activated (41503.36 BogoMIPS)
[    0.340491] devtmpfs: initialized
[    0.340491] x86/mm: Memory block size: 128MB
[    0.341339] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[    0.341339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.341339] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.341339] pinctrl core: initialized pinctrl subsystem
[    0.341339] NET: Registered protocol family 16
[    0.341339] cpuidle: using governor ladder
[    0.341339] cpuidle: using governor menu
[    0.341339] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.341339] ACPI: bus type PCI registered
[    0.341339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.341339] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.341339] PCI: not using MMCONFIG
[    0.341339] PCI: Using configuration type 1 for base access
[    0.341339] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.341339] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.344058] ACPI: Added _OSI(Module Device)
[    0.344059] ACPI: Added _OSI(Processor Device)
[    0.344059] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.344060] ACPI: Added _OSI(Processor Aggregator Device)
[    0.344061] ACPI: Deleted _OSI(Windows 2012)
[    0.344064] ACPI: EC: EC started
[    0.344064] ACPI: EC: interrupt blocked
[    0.344782] ACPI: \: Used as first EC
[    0.344784] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.344785] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.347971] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.351389] ACPI: Dynamic OEM Table Load:
[    0.351389] ACPI: SSDT 0xFFFF96800B4FD000 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.352223] ACPI: Dynamic OEM Table Load:
[    0.352230] ACPI: SSDT 0xFFFF96800B705C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.352382] ACPI: Dynamic OEM Table Load:
[    0.352382] ACPI: SSDT 0xFFFF96800B6D7000 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.353280] ACPI: Interpreter enabled
[    0.353299] ACPI: (supports S0 S3 S4 S5)
[    0.353299] ACPI: Using IOAPIC for interrupt routing
[    0.353321] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.353472] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.353472] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.353472] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.358280] ACPI: Power Resource [PUBS] (on)
[    0.358871] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.359785] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.362358] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.362430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362701] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362767] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362834] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.362917] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.362920] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.363030] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.363078] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.363080] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.363081] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.363082] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.363243] PCI host bridge to bus 0000:00
[    0.363245] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.363246] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.363247] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.363248] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.363249] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.363251] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.363258] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.363338] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.363347] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.363352] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.363355] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.363365] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.363446] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.363470] pci 0000:00:14.0: reg 0x10: [mem 0xf2620000-0xf262ffff 64bit]
[    0.363538] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.363604] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.363629] pci 0000:00:16.0: reg 0x10: [mem 0xf2635000-0xf263500f 64bit]
[    0.363702] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.363765] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[    0.363785] pci 0000:00:16.3: reg 0x10: [io  0x60b0-0x60b7]
[    0.363794] pci 0000:00:16.3: reg 0x14: [mem 0xf263c000-0xf263cfff]
[    0.363915] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.363934] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.363941] pci 0000:00:19.0: reg 0x14: [mem 0xf263b000-0xf263bfff]
[    0.363949] pci 0000:00:19.0: reg 0x18: [io  0x6080-0x609f]
[    0.364011] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.364077] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.364097] pci 0000:00:1a.0: reg 0x10: [mem 0xf263a000-0xf263a3ff]
[    0.364179] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.364243] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.364265] pci 0000:00:1b.0: reg 0x10: [mem 0xf2630000-0xf2633fff 64bit]
[    0.364338] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.364412] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.364551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.364632] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.364770] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.364853] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.364991] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.365072] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.365093] pci 0000:00:1d.0: reg 0x10: [mem 0xf2639000-0xf26393ff]
[    0.365175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.365239] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.365397] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.365415] pci 0000:00:1f.2: reg 0x10: [io  0x60a8-0x60af]
[    0.365423] pci 0000:00:1f.2: reg 0x14: [io  0x60bc-0x60bf]
[    0.365430] pci 0000:00:1f.2: reg 0x18: [io  0x60a0-0x60a7]
[    0.365438] pci 0000:00:1f.2: reg 0x1c: [io  0x60b8-0x60bb]
[    0.365445] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.365453] pci 0000:00:1f.2: reg 0x24: [mem 0xf2638000-0xf26387ff]
[    0.365492] pci 0000:00:1f.2: PME# supported from D3hot
[    0.365548] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.365567] pci 0000:00:1f.3: reg 0x10: [mem 0xf2634000-0xf26340ff 64bit]
[    0.365586] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.365786] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[    0.365814] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[    0.365846] pci 0000:02:00.0: reg 0x10: [mem 0xf1d01000-0xf1d010ff]
[    0.366061] pci 0000:02:00.0: supports D1 D2
[    0.366062] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.366206] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
[    0.366250] pci 0000:02:00.3: reg 0x10: [mem 0xf1d00000-0xf1d007ff]
[    0.366374] pci 0000:02:00.3: Enabling fixed DMA alias to 00.0
[    0.366494] pci 0000:02:00.3: supports D1 D2
[    0.366495] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.376127] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.376132] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.376136] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf25fffff]
[    0.376144] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.376351] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.376589] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[    0.377361] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.388129] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.388137] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.388225] acpiphp: Slot [1] registered
[    0.388235] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.388239] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.388244] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.388251] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.389215] ACPI: EC: interrupt unblocked
[    0.389223] ACPI: EC: event unblocked
[    0.389230] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.389232] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.389309] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.389309] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.389309] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.389309] vgaarb: loaded
[    0.389309] EDAC MC: Ver: 3.0.0
[    0.389309] Registered efivars operations
[    0.400948] PCI: Using ACPI for IRQ routing
[    0.401764] PCI: pci_cache_line_size set to 64 bytes
[    0.401947] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.401948] e820: reserve RAM buffer [mem 0x8a9a0000-0x8bffffff]
[    0.401949] e820: reserve RAM buffer [mem 0xcaff1018-0xcbffffff]
[    0.401950] e820: reserve RAM buffer [mem 0xcb002018-0xcbffffff]
[    0.401950] e820: reserve RAM buffer [mem 0xd694f000-0xd7ffffff]
[    0.401951] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.401952] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[    0.402048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.402048] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.406024] clocksource: Switched to clocksource hpet
[    0.412615] VFS: Disk quotas dquot_6.6.0
[    0.412638] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.412740] AppArmor: AppArmor Filesystem Enabled
[    0.412758] pnp: PnP ACPI init
[    0.413193] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.413195] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.413196] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.413198] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.413199] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.413200] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.413202] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.413203] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.413204] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.413205] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
[    0.413207] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
[    0.413208] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
[    0.413210] system 00:00: [mem 0x000ec000-0x000effff] has been reserved
[    0.413211] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.413212] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.413214] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.413218] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.413330] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.413347] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.413348] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.413350] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.413351] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.413352] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.413354] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.413356] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[    0.413357] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.413359] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.413360] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.413362] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.413363] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.413364] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.413368] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.413416] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.413436] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.413454] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.413880] pnp: PnP ACPI: found 5 devices
[    0.420291] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.420336] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.420341] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.420348] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf25fffff]
[    0.420352] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.420360] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.420366] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.420377] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.420380] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.420386] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.420391] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.420400] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.420401] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.420402] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.420403] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.420404] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.420405] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.420406] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf25fffff]
[    0.420407] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.420409] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[    0.420410] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.420411] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.420412] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.420501] NET: Registered protocol family 2
[    0.420672] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.420866] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.420975] TCP: Hash tables configured (established 131072 bind 65536)
[    0.421011] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.421049] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.421120] NET: Registered protocol family 1
[    0.421132] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.421636] PCI: CLS 64 bytes, default 64
[    0.421674] Unpacking initramfs...
[    1.124199] Freeing initrd memory: 46476K
[    1.124249] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.124252] software IO TLB [mem 0xcea5b000-0xd2a5b000] (64MB) mapped at [ffff967ccea5b000-ffff967cd2a5afff]
[    1.124740] audit: initializing netlink subsys (disabled)
[    1.124806] audit: type=2000 audit(1526521218.124:1): state=initialized audit_enabled=0 res=1
[    1.125108] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.125194] zbud: loaded
[    1.444813] Key type asymmetric registered
[    1.444814] Asymmetric key parser 'x509' registered
[    1.444829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.444871] io scheduler noop registered
[    1.444872] io scheduler deadline registered
[    1.444884] io scheduler cfq registered (default)
[    1.444884] io scheduler mq-deadline registered
[    1.445445] efifb: probing for efifb
[    1.445456] efifb: framebuffer at 0xe0000000, using 1200k, total 1200k
[    1.445457] efifb: mode is 640x480x32, linelength=2560, pages=1
[    1.445457] efifb: scrolling: redraw
[    1.445458] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.446179] Console: switching to colour frame buffer device 80x30
[    1.446807] fb0: EFI VGA frame buffer device
[    1.446814] intel_idle: disabled
[    1.447583] Monitor-Mwait will be used to enter C-1 state
[    1.447586] Monitor-Mwait will be used to enter C-2 state
[    1.456431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.477305] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[    1.477536] Linux agpgart interface v0.103
[    1.477586] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.477586] AMD IOMMUv2 functionality not available on this system
[    1.478202] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.480057] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.480083] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.480246] mousedev: PS/2 mouse device common for all mice
[    1.480288] rtc_cmos 00:02: RTC can wake from S4
[    1.480449] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.480484] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.480640] ledtrig-cpu: registered to indicate activity on CPUs
[    1.481015] NET: Registered protocol family 10
[    1.481258] Segment Routing with IPv6
[    1.481270] mip6: Mobile IPv6
[    1.481272] NET: Registered protocol family 17
[    1.481276] mpls_gso: MPLS GSO support
[    1.481488] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.481990] microcode: sig=0x306a9, pf=0x10, revision=0x1c
[    1.482198] microcode: Microcode Update Driver: v2.2.
[    1.482211] sched_clock: Marking stable (1482173488, 0)->(1506919503, -24746015)
[    1.482603] registered taskstats version 1
[    1.482622] zswap: loaded using pool lzo/zbud
[    1.482711] AppArmor: AppArmor sha1 policy hashing enabled
[    1.482713] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.483075] rtc_cmos 00:02: setting system clock to 2018-05-17 01:40:18 UTC (1526521218)
[    1.484594] Freeing unused kernel memory: 1460K
[    1.484596] Write protecting the kernel read-only data: 16384k
[    1.485129] Freeing unused kernel memory: 2012K
[    1.487097] Freeing unused kernel memory: 1036K
[    1.492713] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.492714] x86/mm: Checking user space page tables
[    1.498156] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.593368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.593497] ACPI: Lid Switch [LID]
[    1.593542] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.593556] ACPI: Sleep Button [SLPB]
[    1.593631] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.593650] ACPI: Power Button [PWRF]
[    1.601648] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.601858] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.602698] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.602829] pps_core: LinuxPPS API ver. 1 registered
[    1.602830] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.603090] thermal LNXTHERM:00: registered as thermal_zone0
[    1.603091] ACPI: Thermal Zone [THM0] (37 C)
[    1.603263] PTP clock support registered
[    1.604903] ACPI: bus type USB registered
[    1.604931] usbcore: registered new interface driver usbfs
[    1.604942] usbcore: registered new interface driver hub
[    1.604984] usbcore: registered new device driver usb
[    1.607255] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.607256] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.607472] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.607835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.609862] ehci-pci: EHCI PCI platform driver
[    1.613218] AVX version of gcm_enc/dec engaged.
[    1.613220] AES CTR mode by8 optimization enabled
[    1.614898] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.616590] SCSI subsystem initialized
[    1.619623] libata version 3.00 loaded.
[    1.620117] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.621729] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.622476] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.629203] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.630093] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.631042] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.631928] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.633077] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.633968] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.634974] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.635867] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.636619] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.637361] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.638024] call_modprobe: crypto-pcbc   2 
[    1.638957] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.639333] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    1.639966] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    1.692115] firewire_ohci 0000:02:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.692445] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.775994] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:7b:dc:b3
[    1.776003] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.776050] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.776256] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.776982] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.777202] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.777209] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.777220] ehci-pci 0000:00:1a.0: debug port 2
[    1.781126] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.781143] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf263a000
[    1.796101] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.796164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.796166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.796167] usb usb1: Product: EHCI Host Controller
[    1.796168] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.796169] usb usb1: SerialNumber: 0000:00:1a.0
[    1.796334] hub 1-0:1.0: USB hub found
[    1.796342] hub 1-0:1.0: 3 ports detected
[    1.796593] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.796597] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.796608] ehci-pci 0000:00:1d.0: debug port 2
[    1.800504] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.800520] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2639000
[    1.816109] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.816156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.816157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.816158] usb usb2: Product: EHCI Host Controller
[    1.816159] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.816160] usb usb2: SerialNumber: 0000:00:1d.0
[    1.816344] hub 2-0:1.0: USB hub found
[    1.816351] hub 2-0:1.0: 3 ports detected
[    1.816639] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.816644] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.817739] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.817744] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.817840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.817842] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.817843] usb usb3: Product: xHCI Host Controller
[    1.817844] usb usb3: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.817845] usb usb3: SerialNumber: 0000:00:14.0
[    1.817961] hub 3-0:1.0: USB hub found
[    1.817973] hub 3-0:1.0: 4 ports detected
[    1.818342] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.818345] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.818383] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.818385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.818386] usb usb4: Product: xHCI Host Controller
[    1.818387] usb usb4: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.818387] usb usb4: SerialNumber: 0000:00:14.0
[    1.818490] hub 4-0:1.0: USB hub found
[    1.818504] hub 4-0:1.0: 4 ports detected
[    1.818953] ahci 0000:00:1f.2: version 3.0
[    1.819093] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.829191] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
[    1.829195] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst 
[    1.840576] scsi host0: ahci
[    1.840716] scsi host1: ahci
[    1.840837] scsi host2: ahci
[    1.840927] scsi host3: ahci
[    1.841099] scsi host4: ahci
[    1.841231] scsi host5: ahci
[    1.841292] ata1: DUMMY
[    1.841296] ata2: SATA max UDMA/133 abar m2048@0xf2638000 port 0xf2638180 irq 28
[    1.841297] ata3: DUMMY
[    1.841298] ata4: DUMMY
[    1.841300] ata5: SATA max UDMA/133 abar m2048@0xf2638000 port 0xf2638300 irq 28
[    1.841300] ata6: DUMMY
[    1.841758] [drm] Memory usable by graphics device = 2048M
[    1.841760] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[    1.841761] fb: switching to inteldrmfb from EFI VGA
[    1.841778] Console: switching to colour dummy device 80x25
[    1.841840] [drm] Replacing VGA console driver
[    1.847951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.847952] [drm] Driver supports precise vblank timestamp query.
[    1.848242] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.891835] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.892161] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.893167] acpi device:00: registered as cooling_device8
[    1.893230] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.944504] fbcon: inteldrmfb (fb0) is primary device
[    2.132114] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.144178] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[    2.144187] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[    2.152071] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.155278] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.156033] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.156037] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.156059] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.156444] ata2.00: ATA-11: KINGSTON SUV400S37480G, 0C3J96R9, max UDMA/133
[    2.156447] ata2.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.157278] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.157282] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.157284] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.157605] ata2.00: configured for UDMA/133
[    2.157813] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5
[    2.208253] firewire_core 0000:02:00.3: created device fw0: GUID 3c970eff7bdcb3ff, S400
[    2.288524] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.288525] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.289214] hub 1-1:1.0: USB hub found
[    2.289359] hub 1-1:1.0: 6 ports detected
[    2.300832] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[    2.308510] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.308513] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.308906] hub 2-1:1.0: USB hub found
[    2.308985] hub 2-1:1.0: 8 ports detected
[    2.361893] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[    2.361898] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.400733] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.471268] ata5: SATA link down (SStatus 0 SControl 300)
[    2.576094] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    2.596092] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.688252] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[    2.688254] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.688256] usb 1-1.4: Product: BCM20702A0
[    2.688268] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.688269] usb 1-1.4: SerialNumber: 2016D8D9BC65
[    2.707745] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c52b
[    2.707748] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.707750] usb 2-1.5: Product: USB Receiver
[    2.707751] usb 2-1.5: Manufacturer: Logitech
[    2.710558] hidraw: raw HID events driver (C) Jiri Kosina
[    2.715393] usbcore: registered new interface driver usbhid
[    2.715394] usbhid: USB HID core driver
[    2.716621] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2
[    2.768120] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.855661] input: Logitech K780 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input8
[    2.855831] logitech-hidpp-device 0003:046D:405B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K780] on usb-0000:00:1d.0-1.5:2
[    2.857660] input: Logitech T620 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/0003:046D:4027.0005/input/input9
[    2.857926] logitech-hidpp-device 0003:046D:4027.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech T620] on usb-0000:00:1d.0-1.5:3
[    2.863600] input: Logitech M600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/0003:046D:401A.0006/input/input10
[    2.863799] logitech-hidpp-device 0003:046D:401A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M600] on usb-0000:00:1d.0-1.5:4
[    2.873550] input: Logitech M280/320/275 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/0003:046D:4057.0007/input/input11
[    2.873755] logitech-hidpp-device 0003:046D:4057.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech M280/320/275] on usb-0000:00:1d.0-1.5:5
[    2.883479] Console: switching to colour frame buffer device 240x67
[    2.883802] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2eb
[    2.883804] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.883805] usb 1-1.6: Product: Integrated Camera
[    2.883806] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.904386] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.928100] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    2.928103] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.928116] sd 1:0:0:0: [sda] Write Protect is off
[    2.928118] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.928132] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.930722]  sda: sda1 sda2 sda3 sda4
[    2.931192] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.039820] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.168347] clocksource: Switched to clocksource tsc
[    3.240151] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    3.323555] logitech-hidpp-device 0003:046D:4027.0005: HID++ 2.0 device connected.
[    5.577533] random: crng init done
[    7.972056] raid6: sse2x1   gen()  6909 MB/s
[    8.020046] raid6: sse2x1   xor()  5319 MB/s
[    8.068047] raid6: sse2x2   gen()  8634 MB/s
[    8.116048] raid6: sse2x2   xor()  6115 MB/s
[    8.164046] raid6: sse2x4   gen() 10072 MB/s
[    8.212049] raid6: sse2x4   xor()  7449 MB/s
[    8.212050] raid6: using algorithm sse2x4 gen() 10072 MB/s
[    8.212051] raid6: .... xor() 7449 MB/s, rmw enabled
[    8.212051] raid6: using ssse3x2 recovery algorithm
[    8.212355] xor: automatically using best checksumming function   avx       
[    8.212526] async_tx: api initialized (async)
[    8.338411] Btrfs loaded, crc32c=crc32c-intel
[    8.464642] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    8.615214] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.615766] call_modprobe: fs-efivarfs   2 
[    8.654022] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    8.654193] systemd[1]: Detected architecture x86-64.
[    8.654395] systemd[1]: Set hostname to <k-pc>.
[    8.958899] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.958979] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.959924] systemd[1]: Created slice User and Session Slice.
[    8.959941] systemd[1]: Reached target User and Group Name Lookups.
[    8.959954] systemd[1]: Reached target Remote File Systems.
[    8.959991] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.960036] systemd[1]: Listening on udev Control Socket.
[    9.005798] call_modprobe: parport_lowlevel   2 
[    9.053654] lp: driver loaded but no devices found
[    9.072899] call_modprobe: parport_lowlevel   2 
[    9.073990] ppdev: user-space parallel port driver
[    9.078057] fuse init (API version 7.26)
[    9.209622] call_modprobe: fs-binfmt_misc   2 
[    9.213093] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    9.239247] systemd-journald[364]: Received request to flush runtime journal from PID 1
[    9.347115] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.349121] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170728/utaddress-247)
[    9.349126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.349131] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[    9.349134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.349135] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[    9.349137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.349138] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[    9.349141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.349141] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.356435] Non-volatile memory driver v1.3
[    9.357217] ACPI: AC Adapter [AC] (on-line)
[    9.362096] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    9.362098] thinkpad_acpi: http://ibm-acpi.sf.net/
[    9.362099] thinkpad_acpi: ThinkPad BIOS G4ETA5WW (2.65 ), EC unknown
[    9.362099] thinkpad_acpi: Lenovo ThinkPad T530, model 2394D48
[    9.363520] thinkpad_acpi: radio switch found; radios are enabled
[    9.363536] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    9.363537] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    9.370497] ACPI: Battery Slot [BAT0] (battery present)
[    9.371356] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.371359] call_modprobe: i915   2 
[    9.374231] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    9.375825] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    9.376961] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    9.377972] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[    9.385427] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    9.385549] EFI Variables Facility v0.08 2004-May-17
[    9.394800] call_modprobe: hdaudio:v10EC0269r00100203a01
                  2 
[    9.395112] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    9.395113] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    9.395114] RAPL PMU: hw unit of domain package 2^-16 Joules
[    9.395115] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    9.399267] Intel(R) Wireless WiFi driver for Linux
[    9.399269] Copyright(c) 2003- 2015 Intel Corporation
[    9.399468] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.402228] pstore: using zlib compression
[    9.402256] pstore: Registered efi as persistent store backend
[    9.411836] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    9.411838] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.411839] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    9.411841] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.411842] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.411843] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    9.411845] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    9.411846] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    9.422464] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    9.422598] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.422601] call_modprobe: iwldvm   2 
[    9.430029] wl: loading out-of-tree module taints kernel.
[    9.430032] wl: module license 'MIXED/Proprietary' taints kernel.
[    9.430032] Disabling lock debugging due to kernel taint
[    9.432274] call_modprobe: char-major-10-237   2 
[    9.433115] call_modprobe: char-major-10-237   2 
[    9.436948] call_modprobe: char-major-10-237   2 
[    9.446675] call_modprobe: char-major-10-237   2 
[    9.448398] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.448991] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.449058] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.449122] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.449189] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    9.450707] loop: module loaded
[    9.463225] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.463227] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    9.463228] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    9.463230] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    9.464272] call_modprobe: fs-squashfs   2 
[    9.467357] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.477467] media: Linux media interface: v0.10
[    9.483265] Linux video capture interface: v2.00
[    9.483801] intel_rapl: Found RAPL domain package
[    9.483802] intel_rapl: Found RAPL domain core
[    9.483803] intel_rapl: Found RAPL domain uncore
[    9.483807] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.495075] call_modprobe: crypto-stdrng   2 
[    9.499911] call_modprobe: crypto-arc4   2 
[    9.523865] call_modprobe: crypto-arc4-all   2 
[    9.524717] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.528281] call_modprobe: crypto-hmac(sha256)   2 
[    9.529003] call_modprobe: crypto-hmac(sha256)-all   2 
[    9.530236] call_modprobe: crypto-stdrng-all   2 
[    9.530432] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2eb)
[    9.532100] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    9.532103] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    9.532105] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    9.532106] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    9.532188] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
[    9.532259] usbcore: registered new interface driver uvcvideo
[    9.532260] USB Video Class driver (1.1.1)
[    9.545757] Bluetooth: Core ver 2.22
[    9.545770] NET: Registered protocol family 31
[    9.545771] Bluetooth: HCI device and connection manager initialized
[    9.545774] Bluetooth: HCI socket layer initialized
[    9.545777] Bluetooth: L2CAP socket layer initialized
[    9.545782] Bluetooth: SCO socket layer initialized
[    9.596135] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    9.633129] audit: type=1400 audit(1526521226.645:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=745 comm="apparmor_parser"
[    9.633509] audit: type=1400 audit(1526521226.645:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=743 comm="apparmor_parser"
[    9.634280] audit: type=1400 audit(1526521226.645:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=744 comm="apparmor_parser"
[    9.635836] audit: type=1400 audit(1526521226.645:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=760 comm="apparmor_parser"
[    9.635874] audit: type=1400 audit(1526521226.645:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine" pid=738 comm="apparmor_parser"
[    9.635877] audit: type=1400 audit(1526521226.645:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=738 comm="apparmor_parser"
[    9.638189] audit: type=1400 audit(1526521226.649:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_i2p" pid=739 comm="apparmor_parser"
[    9.638285] audit: type=1400 audit(1526521226.649:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/i2prouter" pid=741 comm="apparmor_parser"
[    9.642168] audit: type=1400 audit(1526521226.653:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=764 comm="apparmor_parser"
[    9.643633] audit: type=1400 audit(1526521226.653:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=742 comm="apparmor_parser"
[    9.705467] call_modprobe: netdev---all   2 
[    9.706320] call_modprobe: --all   2 
[    9.706898] call_modprobe: netdev---all   2 
[    9.708020] call_modprobe: --all   2 
[   10.564062] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   10.564067] Bluetooth: reset realtek bluetooth device: failed with -16
[   10.564548] usbcore: registered new interface driver btusb
[   10.602667] call_modprobe: bt-proto-4   2 
[   10.606659] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.606661] Bluetooth: BNEP filters: protocol multicast
[   10.606666] Bluetooth: BNEP socket layer initialized
[   10.682412] Bluetooth: hci0: BCM: chip id 63
[   10.683414] Bluetooth: hci0: BCM: features 0x07
[   10.699417] Bluetooth: hci0: BCM20702A
[   10.703421] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[   10.703423] request_firmware: brcm/BCM20702A1-0a5c-21e6.hcd
[   10.703922] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[   10.703926] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[   10.703929] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[   10.768913] call_modprobe: crypto-cmac(aes)   2 
[   10.771961] call_modprobe: crypto-cmac(aes)-all   2 
[   10.774720] call_modprobe: crypto-cmac   2 
[   10.824368] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.040271] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.044665] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   11.057623] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   11.356884] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   11.443752] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   11.569440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   18.104463] wlp3s0: authenticate with 94:d9:b3:c4:2d:f1
[   18.112225] wlp3s0: send auth to 94:d9:b3:c4:2d:f1 (try 1/3)
[   18.114879] wlp3s0: authenticated
[   18.116054] wlp3s0: associate with 94:d9:b3:c4:2d:f1 (try 1/3)
[   18.139873] wlp3s0: RX AssocResp from 94:d9:b3:c4:2d:f1 (capab=0x1431 status=0 aid=8)
[   18.151194] wlp3s0: associated
[   18.219907] wlp3s0: Limiting TX power to 32 (32 - 0) dBm as advertised by 94:d9:b3:c4:2d:f1
[   19.171353] call_modprobe: crypto-ccm(aes)   2 
[   19.172173] call_modprobe: crypto-ccm(aes)-all   2 
[   19.172884] call_modprobe: crypto-ccm   2 
[   19.174289] call_modprobe: crypto-cbcmac(aes)   2 
[   19.174936] call_modprobe: crypto-cbcmac(aes)-all   2 
[   19.175770] call_modprobe: crypto-ctr(aes)   2 
[   19.176397] call_modprobe: crypto-ctr(aes)-all   2 
[   19.177081] call_modprobe: crypto-ctr   2 
[   19.179484] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   19.383601] call_modprobe: ipt_string   2 
[   19.386976] call_modprobe: iptable_filter   2 
[   19.465190] vboxdrv: Found 8 processor cores
[   19.467255] /dev/vmmon[2559]: Module vmmon: registered with major=10 minor=165
[   19.467258] /dev/vmmon[2559]: Using tsc_khz as TSC frequency: 2594106
[   19.467260] /dev/vmmon[2559]: Module vmmon: initialized
[   19.468524] call_modprobe: ts_bm   2 
[   19.489009] vboxdrv: TSC mode is Invariant, tentative frequency 2594105606 Hz
[   19.489010] vboxdrv: Successfully loaded version 5.2.2_Deepin (interface 0x00290000)
[   19.498751] Guest personality initialized and is inactive
[   19.498809] VMCI host device registered (name=vmci, major=10, minor=55)
[   19.498810] Initialized host personality
[   19.503896] VBoxNetFlt: Successfully started.
[   19.507443] NET: Registered protocol family 15
[   19.511372] VBoxNetAdp: Successfully started.
[   19.521475] VBoxPciLinuxInit
[   19.521484] call_modprobe: pci-stub   2 
[   19.523658] vboxpci: IOMMU not found (not registered)
[   19.525107] Adding 3999996k swap on /swapfile.  Priority:-2 extents:6 across:4286716k SSFS
[   19.542362] Initializing XFRM netlink socket
[   19.554509] NET: Registered protocol family 40
[   19.730977] call_modprobe: netdev-eth0   2 
[   19.732233] call_modprobe: eth0   2 
[   19.733281] call_modprobe: netdev-eth1   2 
[   19.734128] call_modprobe: eth1   2 
[   19.735384] call_modprobe: netdev-eth2   2 
[   19.736613] call_modprobe: eth2   2 
[   19.737595] call_modprobe: netdev-eth3   2 
[   19.738551] call_modprobe: eth3   2 
[   19.739701] call_modprobe: netdev-eth4   2 
[   19.740822] call_modprobe: eth4   2 
[   19.741652] call_modprobe: netdev-eth5   2 
[   19.742524] call_modprobe: eth5   2 
[   19.743590] call_modprobe: netdev-eth6   2 
[   19.744416] call_modprobe: eth6   2 
[   19.745174] call_modprobe: netdev-eth7   2 
[   19.745876] call_modprobe: eth7   2 
[   19.753702] /dev/vmnet: open called by PID 3081 (vmnet-bridge)
[   19.753710] /dev/vmnet: hub 0 does not exist, allocating memory.
[   19.753728] /dev/vmnet: port on hub 0 successfully opened
[   19.753736] bridge-wlp3s0: device is wireless, enabling SMAC
[   19.753738] bridge-wlp3s0: up
[   19.753742] bridge-wlp3s0: attached
[   20.576240] call_modprobe: netdev-0.0.0.0   2 
[   20.579547] call_modprobe: 0.0.0.0   2 
[   20.581470] call_modprobe: netdev-0.0.0.0   2 
[   20.582516] call_modprobe: 0.0.0.0   2 
[   20.782281] /dev/vmnet: open called by PID 3349 (vmnet-netifup)
[   20.782289] /dev/vmnet: hub 1 does not exist, allocating memory.
[   20.782306] /dev/vmnet: port on hub 1 successfully opened
[   20.788205] call_modprobe: netdev-0.0.0.0   2 
[   20.789788] call_modprobe: 0.0.0.0   2 
[   20.790750] call_modprobe: netdev-0.0.0.0   2 
[   20.796623] call_modprobe: 0.0.0.0   2 
[   20.801217] call_modprobe: netdev-0.0.0.0   2 
[   20.801375] kauditd_printk_skb: 27 callbacks suppressed
[   20.801377] audit: type=1400 audit(1526521237.813:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3334 comm="apparmor_parser"
[   20.802059] call_modprobe: 0.0.0.0   2 
[   20.861414] /dev/vmnet: open called by PID 3356 (vmnet-dhcpd)
[   20.861424] /dev/vmnet: port on hub 1 successfully opened
[   20.903514] /dev/vmnet: open called by PID 3403 (vmnet-natd)
[   20.903525] /dev/vmnet: hub 8 does not exist, allocating memory.
[   20.903539] /dev/vmnet: port on hub 8 successfully opened
[   20.923236] userif-3: sent link down event.
[   20.923239] userif-3: sent link up event.
[   20.932256] /dev/vmnet: open called by PID 3410 (vmnet-netifup)
[   20.932267] /dev/vmnet: port on hub 8 successfully opened
[   20.933202] call_modprobe: netdev-0.0.0.0   2 
[   20.935946] call_modprobe: 0.0.0.0   2 
[   20.970323] call_modprobe: netdev-eth0   2 
[   20.973519] call_modprobe: eth0   2 
[   20.977229] call_modprobe: netdev-eth1   2 
[   20.981530] call_modprobe: eth1   2 
[   20.985780] call_modprobe: netdev-eth2   2 
[   20.987563] call_modprobe: eth2   2 
[   20.988887] /dev/vmnet: open called by PID 3424 (vmnet-dhcpd)
[   20.988897] call_modprobe: netdev-eth3   2 
[   20.988898] /dev/vmnet: port on hub 8 successfully opened
[   20.992916] call_modprobe: eth3   2 
[   20.997310] call_modprobe: netdev-eth4   2 
[   20.998546] call_modprobe: eth4   2 
[   21.005632] call_modprobe: netdev-eth5   2 
[   21.007152] call_modprobe: eth5   2 
[   21.009571] call_modprobe: netdev-eth6   2 
[   21.013627] call_modprobe: eth6   2 
[   21.016762] call_modprobe: netdev-eth7   2 
[   21.022171] call_modprobe: eth7   2 
[   21.184614] /dev/vmmon[3220]: PTSC: initialized at 2594106000 Hz using TSC, TSCs are synchronized.
[   21.506779] /dev/vmmon[3220]: Monitor IPI vector: ff
[   21.506782] /dev/vmmon[3220]: HV      IPI vector: f2
[   22.019987] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   22.021796] Bridge firewalling registered
[   22.031399] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   22.048263] call_modprobe: netdev-0.0.0.0   2 
[   22.049959] call_modprobe: 0.0.0.0   2 
[   22.062221] call_modprobe: ipt_addrtype   2 
[   22.069349] call_modprobe: iptable_nat   2 
[   22.074124] call_modprobe: nf_conntrack-2   2 
[   22.112103] call_modprobe: netdev-0.0.0.0   2 
[   22.113239] call_modprobe: 0.0.0.0   2 
[   22.463317] Netfilter messages via NETLINK v0.30.
[   22.468032] ctnetlink v0.93: registering with nfnetlink.
[   22.476083] call_modprobe: netdev-0.0.0.0   2 
[   22.477118] call_modprobe: 0.0.0.0   2 
[   22.484938] call_modprobe: ipt_MASQUERADE   2 
[   22.676256] userif-3: sent link down event.
[   22.676259] userif-3: sent link up event.
[   22.793053] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   22.828501] call_modprobe: netdev-0.0.0.0   2 
[   22.832935] call_modprobe: 0.0.0.0   2 
[   23.028430] userif-3: sent link down event.
[   23.028432] userif-3: sent link up event.
[   24.042096] call_modprobe: rtnl-link-veth   2 
[   24.057503] docker0: port 1(veth3cb3de6) entered blocking state
[   24.057506] docker0: port 1(veth3cb3de6) entered disabled state
[   24.057592] device veth3cb3de6 entered promiscuous mode
[   24.057694] IPv6: ADDRCONF(NETDEV_UP): veth3cb3de6: link is not ready
[   24.229435] call_modprobe: ipt_tcp   2 
[   24.277918] call_modprobe: ipt_DNAT   2 
[   24.946612] eth0: renamed from vethdfc8de1
[   24.980412] IPv6: ADDRCONF(NETDEV_CHANGE): veth3cb3de6: link becomes ready
[   24.980481] docker0: port 1(veth3cb3de6) entered blocking state
[   24.980482] docker0: port 1(veth3cb3de6) entered forwarding state
[   24.980559] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[   25.181994] userif-3: sent link down event.
[   25.181996] userif-3: sent link up event.
[   26.144233] call_modprobe: netdev-0.0.0.0   2 
[   26.146286] call_modprobe: 0.0.0.0   2 
[   26.374337] call_modprobe: netdev-eth0   2 
[   26.377270] call_modprobe: eth0   2 
[   26.380138] call_modprobe: netdev-eth1   2 
[   26.389084] call_modprobe: eth1   2 
[   26.396934] call_modprobe: netdev-eth2   2 
[   26.401005] call_modprobe: eth2   2 
[   26.405722] call_modprobe: netdev-eth3   2 
[   26.407224] call_modprobe: eth3   2 
[   26.410108] call_modprobe: netdev-eth4   2 
[   26.414009] call_modprobe: eth4   2 
[   26.417578] call_modprobe: netdev-eth5   2 
[   26.421083] call_modprobe: eth5   2 
[   26.426356] call_modprobe: netdev-eth6   2 
[   26.428928] call_modprobe: eth6   2 
[   26.433140] call_modprobe: netdev-eth7   2 
[   26.434065] call_modprobe: eth7   2 
[   26.880128] call_modprobe: netdev-0.0.0.0   2 
[   26.881386] call_modprobe: 0.0.0.0   2 
[   29.437916] /dev/vmnet: open called by PID 5360 (vmx-vcpu-0)
[   29.437928] /dev/vmnet: port on hub 8 successfully opened
[   29.437940] /dev/vmnet: open called by PID 5360 (vmx-vcpu-0)
[   29.437944] /dev/vmnet: port on hub 8 successfully opened
[   52.461224] logitech-hidpp-device 0003:046D:405B.0004: HID++ 4.5 device connected.
[   76.703310] call_modprobe: snd-seq   2 
[   76.709117] call_modprobe: snd-seq-client-14   2 
[ 1209.342811] call_modprobe: net-pf-24   2 
[ 1209.349671] PPP generic driver version 2.4.2
[ 1209.350382] NET: Registered protocol family 24
[ 1209.350589] call_modprobe: net-pf-24-proto-1   2 
[ 1209.355001] l2tp_core: L2TP core driver, V2.0
[ 1209.356006] l2tp_netlink: L2TP netlink interface
[ 1209.357579] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1210.618502] call_modprobe: netdev-0.0.0.0   2 
[ 1210.619523] call_modprobe: 0.0.0.0   2 
[ 1210.620200] call_modprobe: netdev-0.0.0.0   2 
[ 1210.623189] call_modprobe: 0.0.0.0   2 
[ 1210.624812] call_modprobe: netdev-0.0.0.0   2 
[ 1210.625873] call_modprobe: 0.0.0.0   2 
[ 1210.626998] call_modprobe: netdev-0.0.0.0   2 
[ 1210.628456] call_modprobe: 0.0.0.0   2 
[ 1210.629452] call_modprobe: netdev-0.0.0.0   2 
[ 1210.631990] call_modprobe: 0.0.0.0   2 
[ 1210.827274] userif-3: sent link down event.
[ 1210.827277] userif-3: sent link up event.
[ 2791.117038] call_modprobe: netdev-0.0.0.0   2 
[ 2791.118769] call_modprobe: 0.0.0.0   2 
[ 2791.317011] userif-3: sent link down event.
[ 2791.317015] userif-3: sent link up event.
[ 3571.715021] deepin-notifica[2104]: segfault at 7f58cbffec80 ip 00007f590c64bf03 sp 00007ffe51bf9450 error 4 in libQt5Gui.so.5.6.1[7f590c4ce000+54a000]
[ 3571.724182] easystroke[24228]: segfault at 0 ip 00007fe460fe7091 sp 00007ffe1f29a0d8 error 4 in libgtkmm-3.0.so.1.1.0[7fe460c85000+4a8000]
[ 3571.734603] dde-dock[2144]: segfault at 7f8722106c80 ip 00007f874c7f6f03 sp 00007ffcaf631840 error 4 in libQt5Gui.so.5.6.1[7f874c679000+54a000]
[ 3587.778013] call_modprobe: netdev-0.0.0.0   2 
[ 3587.780527] call_modprobe: 0.0.0.0   2 
[ 3587.790970] call_modprobe: netdev-0.0.0.0   2 
[ 3587.796833] call_modprobe: 0.0.0.0   2 
[ 3587.972633] userif-3: sent link down event.
[ 3587.972636] userif-3: sent link up event.
[ 3935.115675] wlp3s0: disconnect from AP 94:d9:b3:c4:2d:f1 for new auth to 94:d9:b3:c4:3a:07
[ 3935.117135] wlp3s0: authenticate with 94:d9:b3:c4:3a:07
[ 3935.120042] wlp3s0: send auth to 94:d9:b3:c4:3a:07 (try 1/3)
[ 3935.120336] bridge-wlp3s0: disabling the bridge on dev down
[ 3935.120376] bridge-wlp3s0: down
[ 3935.120388] bridge-wlp3s0: detached
[ 3935.120431] /dev/vmnet: open called by PID 3081 (vmnet-bridge)
[ 3935.120440] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 3935.120471] /dev/vmnet: port on hub 0 successfully opened
[ 3935.120485] bridge-veth3cb3de6: up
[ 3935.120489] bridge-veth3cb3de6: attached
[ 3935.122605] wlp3s0: authenticated
[ 3935.123801] wlp3s0: associate with 94:d9:b3:c4:3a:07 (try 1/3)
[ 3935.142119] wlp3s0: RX ReassocResp from 94:d9:b3:c4:3a:07 (capab=0x1431 status=0 aid=3)
[ 3935.146922] wlp3s0: associated
[ 3935.176150] wlp3s0: Limiting TX power to 32 (32 - 0) dBm as advertised by 94:d9:b3:c4:3a:07
[ 3935.320240] userif-3: sent link down event.
[ 3935.320242] userif-3: sent link up event.
[ 4113.730185] call_modprobe: fs-vfat   2 
[ 4113.736069] call_modprobe: nls_cp437   2 
[ 4113.738110] call_modprobe: nls_ascii   2 
