[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.0-deepin2-amd64 root=UUID=cf5393c6-6ac6-473c-9fc8-274a4cf564b8 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca54bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca54c000-0x00000000ca552fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca553000-0x00000000caed3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caed4000-0x00000000cb254fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb255000-0x00000000db178fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db179000-0x00000000db202fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db203000-0x00000000db366fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db367000-0x00000000db88ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000db890000-0x00000000dbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Vostro 3902  /0T1D10       , BIOS A11 11/02/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x31fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7F00000000 write-back
[    0.000000]   2 base 0300000000 mask 7FE0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   5 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   6 base 031FE00000 mask 7FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fdb20-0x000fdb2f] mapped at [ffffffffff200b20]
[    0.000000] Base memory trampoline at [ffff94e600097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x92809000, 0x92809fff] PGTABLE
[    0.000000] BRK [0x9280a000, 0x9280afff] PGTABLE
[    0.000000] BRK [0x9280b000, 0x9280bfff] PGTABLE
[    0.000000] BRK [0x9280c000, 0x9280cfff] PGTABLE
[    0.000000] BRK [0x9280d000, 0x9280dfff] PGTABLE
[    0.000000] BRK [0x9280e000, 0x9280efff] PGTABLE
[    0.000000] BRK [0x9280f000, 0x9280ffff] PGTABLE
[    0.000000] BRK [0x92810000, 0x92810fff] PGTABLE
[    0.000000] BRK [0x92811000, 0x92811fff] PGTABLE
[    0.000000] BRK [0x92812000, 0x92812fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31e71000-0x34f2ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000DB474080 00007C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DB480850 00010C (v05 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DB474190 00C6BD (v02 DELL   WN09     00000000 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DB88E080 000040
[    0.000000] ACPI: APIC 0x00000000DB480960 000072 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DB4809D8 000044 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000DB480A20 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: SLIC 0x00000000DB480AC8 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DB480C40 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DB481180 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000DB481C58 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DB481C98 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DB481CD0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DB482040 003528 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x31fdf9000-0x31fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ca54bfff]
[    0.000000]   node   0: [mem 0x00000000ca553000-0x00000000caed3fff]
[    0.000000]   node   0: [mem 0x00000000cb255000-0x00000000db178fff]
[    0.000000]   node   0: [mem 0x00000000db203000-0x00000000db366fff]
[    0.000000]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031fdfffff]
[    0.000000] On node 0 totalpages: 3124466
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13950 pages used for memmap
[    0.000000]   DMA32 zone: 892758 pages, LIFO batch:31
[    0.000000]   Normal zone: 34808 pages used for memmap
[    0.000000]   Normal zone: 2227712 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xca54c000-0xca552fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaed4000-0xcb254fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb179000-0xdb202fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb367000-0xdb88ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb890000-0xdbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff94e91fa00000 s143000 r8192 d29032 u524288
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3075623
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-deepin2-amd64 root=UUID=cf5393c6-6ac6-473c-9fc8-274a4cf564b8 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12161756K/12497864K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 336108K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3691.410 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7382.82 BogoMIPS (lpj=14765640)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.011272] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.011295] Security Framework initialized
[    0.011296] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011310] AppArmor: AppArmor initialized
[    0.013274] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.014255] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014299] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014331] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014469] CPU: Physical Processor ID: 0
[    0.014469] CPU: Processor Core ID: 0
[    0.014473] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014474] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014477] mce: CPU supports 7 MCE banks
[    0.014483] CPU0: Thermal monitoring enabled (TM1)
[    0.014490] process: using mwait in idle threads
[    0.014492] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.014492] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.014493] Applying alternatives
[    0.014538] Applying alternatives done
[    0.014538] Applying alternatives smp done
[    0.014699] Freeing SMP alternatives memory: 28K
[    0.015498] smpboot: Max logical packages: 2
[    0.015846] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.056000] smpboot: CPU0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.068018] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.068046] ... version:                3
[    0.068046] ... bit width:              48
[    0.068046] ... generic registers:      4
[    0.068047] ... value mask:             0000ffffffffffff
[    0.068047] ... max period:             00007fffffffffff
[    0.068047] ... fixed-purpose events:   3
[    0.068048] ... event mask:             000000070000000f
[    0.076015] Hierarchical SRCU implementation.
[    0.092076] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.100013] smp: Bringing up secondary CPUs ...
[    0.132030] x86: Booting SMP configuration:
[    0.132030] .... node  #0, CPUs:      #1 #2 #3
[    0.196337] smp: Brought up 1 node, 4 CPUs
[    0.196337] smpboot: Total of 4 processors activated (29531.28 BogoMIPS)
[    0.198466] devtmpfs: initialized
[    0.198466] x86/mm: Memory block size: 128MB
[    0.198466] PM: Registering ACPI NVS region [mem 0xca54c000-0xca552fff] (28672 bytes)
[    0.198466] PM: Registering ACPI NVS region [mem 0xdb367000-0xdb88ffff] (5410816 bytes)
[    0.198466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.198466] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.198466] pinctrl core: initialized pinctrl subsystem
[    0.198466] NET: Registered protocol family 16
[    0.198466] cpuidle: using governor ladder
[    0.204014] cpuidle: using governor menu
[    0.204024] ACPI: bus type PCI registered
[    0.204025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.204067] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.204069] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.204074] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.204114] PCI: Using configuration type 1 for base access
[    0.204129] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.208038] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.208038] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.208040] ACPI: Added _OSI(Module Device)
[    0.208041] ACPI: Added _OSI(Processor Device)
[    0.208041] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.208042] ACPI: Added _OSI(Processor Aggregator Device)
[    0.208168] ACPI: Executed 1 blocks of module-level executable AML code
[    0.209669] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.212076] ACPI: Dynamic OEM Table Load:
[    0.212080] ACPI: SSDT 0xFFFF94E911159000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.212163] ACPI: Dynamic OEM Table Load:
[    0.212167] ACPI: SSDT 0xFFFF94E9111A3800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.212359] ACPI: Dynamic OEM Table Load:
[    0.212359] ACPI: SSDT 0xFFFF94E91117CE00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.212569] ACPI: Interpreter enabled
[    0.212589] ACPI: (supports S0 S3 S4 S5)
[    0.212590] ACPI: Using IOAPIC for interrupt routing
[    0.212608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.212780] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.222145] ACPI: Power Resource [FN00] (off)
[    0.222202] ACPI: Power Resource [FN01] (off)
[    0.222256] ACPI: Power Resource [FN02] (off)
[    0.222309] ACPI: Power Resource [FN03] (off)
[    0.222363] ACPI: Power Resource [FN04] (off)
[    0.222880] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.222883] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.223287] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.223555] PCI host bridge to bus 0000:00
[    0.223556] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.223557] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.223558] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.223558] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.223559] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.223560] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.223560] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.223561] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.223562] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.223562] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.223563] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.223568] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.223629] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[    0.224004] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.224008] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.224010] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.224066] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.224072] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[    0.224145] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.224162] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.224211] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.224260] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.224277] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1e000-0xf7d1e00f 64bit]
[    0.224329] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.224383] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.224401] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff]
[    0.224471] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.224521] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.224537] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.224594] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.224646] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.224704] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.224783] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.224840] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.224915] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.224972] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.225050] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.225068] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[    0.225137] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.225189] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.225327] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.225340] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.225346] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.225351] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.225357] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.225362] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.225368] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff]
[    0.225397] pci 0000:00:1f.2: PME# supported from D3hot
[    0.225442] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.225456] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
[    0.225472] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.225571] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.225636] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.225663] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.225689] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.225705] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.225793] pci 0000:02:00.0: supports D1 D2
[    0.225793] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236019] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.236022] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.236025] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.236029] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.236087] pci 0000:03:00.0: [1283:8893] type 01 class 0x060401
[    0.236230] pci 0000:03:00.0: supports D1 D2
[    0.236231] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236267] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[    0.236396] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.236878] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.236912] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.236945] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.236978] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.237010] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.237043] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.237075] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.237107] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.237386] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.237386] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.237386] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.237386] vgaarb: loaded
[    0.237386] EDAC MC: Ver: 3.0.0
[    0.237386] PCI: Using ACPI for IRQ routing
[    0.237386] PCI: pci_cache_line_size set to 64 bytes
[    0.237386] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.237386] e820: reserve RAM buffer [mem 0xca54c000-0xcbffffff]
[    0.237386] e820: reserve RAM buffer [mem 0xcaed4000-0xcbffffff]
[    0.237386] e820: reserve RAM buffer [mem 0xdb179000-0xdbffffff]
[    0.237386] e820: reserve RAM buffer [mem 0xdb367000-0xdbffffff]
[    0.237386] e820: reserve RAM buffer [mem 0x31fe00000-0x31fffffff]
[    0.237386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.237386] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.240013] clocksource: Switched to clocksource hpet
[    0.245995] VFS: Disk quotas dquot_6.6.0
[    0.246012] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.246089] AppArmor: AppArmor Filesystem Enabled
[    0.246103] pnp: PnP ACPI init
[    0.246177] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.246180] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.246299] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.246301] system 00:01: [io  0xffff] has been reserved
[    0.246302] system 00:01: [io  0xffff] has been reserved
[    0.246302] system 00:01: [io  0xffff] has been reserved
[    0.246303] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.246305] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.246306] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.246306] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.246307] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.246308] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.246310] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246326] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246356] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.246358] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.246437] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.246438] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.246439] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.246441] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246486] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.246488] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246769] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.246770] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.246770] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.246771] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.246772] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.246773] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.246774] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.246775] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.246776] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.246777] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.246778] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.246779] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.246780] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246936] pnp: PnP ACPI: found 7 devices
[    0.252640] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.252650] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.252652] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.252653] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.252683] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.252686] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.252688] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.252689] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.252692] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.252695] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.252698] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.252703] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.252705] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.252708] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.252711] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.252715] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.252736] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[    0.252745] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.252746] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.252746] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.252747] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.252748] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.252749] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.252749] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.252750] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.252750] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.252751] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.252752] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.252752] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.252753] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.252754] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.252754] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.252755] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.252830] NET: Registered protocol family 2
[    0.252949] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.253075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.253177] TCP: Hash tables configured (established 131072 bind 65536)
[    0.253204] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.253237] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.253294] NET: Registered protocol family 1
[    0.253302] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.296081] PCI: CLS 64 bytes, default 64
[    0.296108] Unpacking initramfs...
[    0.782267] Freeing initrd memory: 49916K
[    0.782272] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.782273] software IO TLB [mem 0xd7179000-0xdb179000] (64MB) mapped at [ffff94e6d7179000-ffff94e6db178fff]
[    0.782539] audit: initializing netlink subsys (disabled)
[    0.782587] audit: type=2000 audit(1525675959.780:1): state=initialized audit_enabled=0 res=1
[    0.782794] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.782830] zbud: loaded
[    0.981410] Key type asymmetric registered
[    0.981411] Asymmetric key parser 'x509' registered
[    0.981423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.981448] io scheduler noop registered
[    0.981449] io scheduler deadline registered
[    0.981459] io scheduler cfq registered (default)
[    0.981459] io scheduler mq-deadline registered
[    0.981919] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.981935] pcieport 0000:00:1c.3: Signaling PME with IRQ 25
[    0.981951] pcieport 0000:00:1c.5: Signaling PME with IRQ 26
[    0.981965] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.981994] intel_idle: disabled
[    0.982208] Monitor-Mwait will be used to enter C-1 state
[    0.982217] Monitor-Mwait will be used to enter C-2 state
[    0.982690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.982961] Linux agpgart interface v0.103
[    0.982993] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.982993] AMD IOMMUv2 functionality not available on this system
[    0.983185] i8042: PNP: No PS/2 controller found.
[    0.983229] mousedev: PS/2 mouse device common for all mice
[    0.983251] rtc_cmos 00:02: RTC can wake from S4
[    0.983352] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.983374] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.983410] ledtrig-cpu: registered to indicate activity on CPUs
[    0.983547] NET: Registered protocol family 10
[    0.983669] Segment Routing with IPv6
[    0.983677] mip6: Mobile IPv6
[    0.983678] NET: Registered protocol family 17
[    0.983679] mpls_gso: MPLS GSO support
[    0.983815] microcode: sig=0x306c3, pf=0x2, revision=0x1d
[    0.983851] microcode: Microcode Update Driver: v2.2.
[    0.983857] sched_clock: Marking stable (983847873, 0)->(1687759952, -703912079)
[    0.984016] registered taskstats version 1
[    0.984026] zswap: loaded using pool lzo/zbud
[    0.984087] AppArmor: AppArmor sha1 policy hashing enabled
[    0.984088] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.984360] rtc_cmos 00:02: setting system clock to 2018-05-07 06:52:40 UTC (1525675960)
[    0.985244] Freeing unused kernel memory: 1460K
[    0.985245] Write protecting the kernel read-only data: 16384k
[    0.985535] Freeing unused kernel memory: 2012K
[    0.986907] Freeing unused kernel memory: 1036K
[    0.990112] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.990112] x86/mm: Checking user space page tables
[    0.993163] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.023823] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.024292] ACPI: Power Button [PWRB]
[    1.024508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.024523] ACPI: Power Button [PWRF]
[    1.032918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.032934] ACPI: bus type USB registered
[    1.032949] usbcore: registered new interface driver usbfs
[    1.032955] usbcore: registered new interface driver hub
[    1.032968] usbcore: registered new device driver usb
[    1.033583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.035486] ehci-pci: EHCI PCI platform driver
[    1.035628] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.035636] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.035649] ehci-pci 0000:00:1a.0: debug port 2
[    1.039554] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.039567] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000
[    1.040652] SCSI subsystem initialized
[    1.044281] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.044407] thermal LNXTHERM:00: registered as thermal_zone0
[    1.044408] ACPI: Thermal Zone [TZ00] (28 C)
[    1.044656] thermal LNXTHERM:01: registered as thermal_zone1
[    1.044657] ACPI: Thermal Zone [TZ01] (30 C)
[    1.044762] AVX2 version of gcm_enc/dec engaged.
[    1.044763] AES CTR mode by8 optimization enabled
[    1.044943] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffbb89c001e000, f4:8e:38:88:e6:4d, XID 0c000800 IRQ 27
[    1.044945] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.045551] libata version 3.00 loaded.
[    1.048665] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.052024] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.052085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.052086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.052087] usb usb1: Product: EHCI Host Controller
[    1.052088] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.052089] usb usb1: SerialNumber: 0000:00:1a.0
[    1.052268] hub 1-0:1.0: USB hub found
[    1.052275] hub 1-0:1.0: 2 ports detected
[    1.052549] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.052554] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.052566] ehci-pci 0000:00:1d.0: debug port 2
[    1.053652] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.055043] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.056462] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.056477] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
[    1.056925] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.057412] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.057946] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.058397] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.058933] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.059282] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.059716] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.060051] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.060477] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.060819] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.061169] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.061518] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.061857] call_modprobe: crypto-pcbc   2 
[    1.062425] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.062723] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    1.063094] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    1.072033] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.072096] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.072097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.072098] usb usb2: Product: EHCI Host Controller
[    1.072098] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.072099] usb usb2: SerialNumber: 0000:00:1d.0
[    1.072192] hub 2-0:1.0: USB hub found
[    1.072201] hub 2-0:1.0: 2 ports detected
[    1.072427] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.072432] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.073509] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.073514] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.073626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.073628] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.073629] usb usb3: Product: xHCI Host Controller
[    1.073630] usb usb3: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.073631] usb usb3: SerialNumber: 0000:00:14.0
[    1.073741] hub 3-0:1.0: USB hub found
[    1.073757] hub 3-0:1.0: 10 ports detected
[    1.074732] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.074734] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.074792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.074793] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.074793] usb usb4: Product: xHCI Host Controller
[    1.074794] usb usb4: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.074795] usb usb4: SerialNumber: 0000:00:14.0
[    1.074879] hub 4-0:1.0: USB hub found
[    1.074888] hub 4-0:1.0: 2 ports detected
[    1.075150] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.075165] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.075983] ahci 0000:00:1f.2: version 3.0
[    1.076123] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.076126] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
[    1.076511] scsi host0: ahci
[    1.076596] scsi host1: ahci
[    1.076665] scsi host2: ahci
[    1.076726] scsi host3: ahci
[    1.076760] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 29
[    1.076761] ata2: DUMMY
[    1.076762] ata3: DUMMY
[    1.076762] ata4: DUMMY
[    1.076970] [drm] PipeC fused off
[    1.076978] [drm] Memory usable by graphics device = 2048M
[    1.076979] [drm] Replacing VGA console driver
[    1.077981] Console: switching to colour dummy device 80x25
[    1.084060] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.084061] [drm] Driver supports precise vblank timestamp query.
[    1.086144] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.088847] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.089652] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.089983] acpi device:61: registered as cooling_device9
[    1.090047] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.154648] fbcon: inteldrmfb (fb0) is primary device
[    1.232838] Console: switching to colour frame buffer device 240x67
[    1.251975] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.388083] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.391676] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.392746] ata1.00: ATA-8: ST500DM002-1SB10A, CC43, max UDMA/133
[    1.392748] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.393869] ata1.00: configured for UDMA/133
[    1.394074] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1SB10 CC43 PQ: 0 ANSI: 5
[    1.396264] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.396265] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.396282] sd 0:0:0:0: [sda] Write Protect is off
[    1.396283] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.396307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.408084] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    1.408097] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.471891]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    1.472709] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.544522] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.544524] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.544783] hub 1-1:1.0: USB hub found
[    1.544866] hub 1-1:1.0: 4 ports detected
[    1.561235] usb 3-1: New USB device found, idVendor=1a2c, idProduct=2124
[    1.561237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.561238] usb 3-1: Product: USB Keyboard
[    1.561238] usb 3-1: Manufacturer: SEM
[    1.562921] hidraw: raw HID events driver (C) Jiri Kosina
[    1.564375] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.564376] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.564527] hub 2-1:1.0: USB hub found
[    1.564627] hub 2-1:1.0: 6 ports detected
[    1.567161] usbcore: registered new interface driver usbhid
[    1.567162] usbhid: USB HID core driver
[    1.567723] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1A2C:2124.0001/input/input3
[    1.624211] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-1/input0
[    1.624327] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:1A2C:2124.0002/input/input4
[    1.684163] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-1/input1
[    1.792072] tsc: Refined TSC clocksource calibration: 3691.451 MHz
[    1.792076] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a6b9449ba6, max_idle_ns: 881590891201 ns
[    1.832040] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[    1.983262] usb 3-2: New USB device found, idVendor=0000, idProduct=0538
[    1.983264] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.983264] usb 3-2: Product:  USB OPTICAL MOUSE
[    1.985427] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0000:0538.0003/input/input5
[    1.985491] hid-generic 0003:0000:0538.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
[    2.112038] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[    2.204022] raid6: sse2x1   gen() 11391 MB/s
[    2.252015] raid6: sse2x1   xor()  8605 MB/s
[    2.260481] usb 3-8: New USB device found, idVendor=0781, idProduct=556b
[    2.260482] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.260483] usb 3-8: Product: Cruzer Edge
[    2.260483] usb 3-8: Manufacturer: SanDisk
[    2.260484] usb 3-8: SerialNumber: 4C530399960111104322
[    2.261910] usb-storage 3-8:1.0: USB Mass Storage device detected
[    2.262073] scsi host4: usb-storage 3-8:1.0
[    2.262137] usbcore: registered new interface driver usb-storage
[    2.262434] usbcore: registered new interface driver uas
[    2.300015] raid6: sse2x2   gen() 14321 MB/s
[    2.348016] raid6: sse2x2   xor()  9747 MB/s
[    2.396013] raid6: sse2x4   gen() 16694 MB/s
[    2.444014] raid6: sse2x4   xor() 11641 MB/s
[    2.492014] raid6: avx2x1   gen() 22246 MB/s
[    2.540014] raid6: avx2x1   xor() 16452 MB/s
[    2.588014] raid6: avx2x2   gen() 25747 MB/s
[    2.636014] raid6: avx2x2   xor() 17544 MB/s
[    2.684014] raid6: avx2x4   gen() 29719 MB/s
[    2.732014] raid6: avx2x4   xor() 21242 MB/s
[    2.732015] raid6: using algorithm avx2x4 gen() 29719 MB/s
[    2.732015] raid6: .... xor() 21242 MB/s, rmw enabled
[    2.732016] raid6: using avx2x2 recovery algorithm
[    2.732192] xor: automatically using best checksumming function   avx       
[    2.732358] async_tx: api initialized (async)
[    2.816105] clocksource: Switched to clocksource tsc
[    3.061413] Btrfs loaded, crc32c=crc32c-intel
[    3.264424] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.27 PQ: 0 ANSI: 6
[    3.264753] sd 4:0:0:0: [sdb] 61056064 512-byte logical blocks: (31.3 GB/29.1 GiB)
[    3.265415] sd 4:0:0:0: [sdb] Write Protect is off
[    3.265417] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.265634] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.267574]  sdb: sdb1
[    3.268412] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.423416] PM: Starting manual resume from disk
[    3.423534] PM: Image not found (code -22)
[    3.623767] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    4.508865] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    4.703062] random: crng init done
[    4.729774] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.810671] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.810752] systemd[1]: Detected architecture x86-64.
[    4.815161] systemd[1]: Set hostname to <roger-pc>.
[    5.471380] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    5.471382] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    5.909984] systemd[1]: Created slice User and Session Slice.
[    5.910203] systemd[1]: Created slice System Slice.
[    5.910269] systemd[1]: Listening on udev Control Socket.
[    5.910319] systemd[1]: Listening on Journal Socket.
[    5.910838] systemd[1]: Mounting POSIX Message Queue File System...
[    6.245988] call_modprobe: parport_lowlevel   2 
[    6.404364] lp: driver loaded but no devices found
[    6.445441] call_modprobe: parport_lowlevel   2 
[    6.445935] ppdev: user-space parallel port driver
[    6.502384] bbswitch: loading out-of-tree module taints kernel.
[    6.502516] bbswitch: version 0.8
[    6.502519] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    6.502522] bbswitch: No discrete VGA device found
[    6.685615] fuse init (API version 7.26)
[    6.837595] call_modprobe: fs-binfmt_misc   2 
[    6.874390] EXT4-fs (sda9): re-mounted. Opts: data=ordered
[    6.948215] systemd-journald[335]: Received request to flush runtime journal from PID 1
[    7.074492] systemd-journald[335]: File /var/log/journal/79013f7d529040b7bcd70afbf08de4c2/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    8.480579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.480606] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    8.624639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.661226] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[    8.661232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.661235] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    8.661238] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.661239] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    8.661242] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    8.661245] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.661246] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    8.661249] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    8.661252] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.661252] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.704410] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    8.986436] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.098978] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    9.098979] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    9.098980] RAPL PMU: hw unit of domain package 2^-14 Joules
[    9.098980] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    9.098981] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    9.512558] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.512561] call_modprobe: i915   2 
[    9.520268] call_modprobe: hdaudio:v10EC0662r00100300a01
                  2 
[    9.630606] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.630607] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.630608] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.630609] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    9.630609] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    9.630610] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x19
[    9.630611] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x18
[    9.630612] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    9.639776] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    9.639809] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    9.639838] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    9.639869] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    9.639897] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    9.648087] call_modprobe: hdaudio:v80862807r00100000a01
                  2 
[    9.704334] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    9.704386] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    9.704432] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    9.997165] intel_rapl: Found RAPL domain package
[    9.997167] intel_rapl: Found RAPL domain core
[    9.997168] intel_rapl: Found RAPL domain uncore
[    9.997168] intel_rapl: Found RAPL domain dram
[    9.997170] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.997173] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   10.015513] iTCO_vendor_support: vendor-support=0
[   10.040653] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.040697] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   10.040782] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.546663] Adding 16777212k swap on /dev/sda8.  Priority:-2 extents:1 across:16777212k FS
[   11.085332] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[   11.644506] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.515883] call_modprobe: netdev---all   2 
[   12.516523] call_modprobe: --all   2 
[   12.517162] call_modprobe: netdev---all   2 
[   12.517839] call_modprobe: --all   2 
[   16.078969] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   16.079079] request_firmware: rtl_nic/rtl8168g-2.fw
[   16.095500] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[   16.142612] r8169 0000:02:00.0 enp2s0: link down
[   16.142613] r8169 0000:02:00.0 enp2s0: link down
[   16.142669] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.776923] r8169 0000:02:00.0 enp2s0: link up
[   17.776931] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   20.151692] vboxdrv: Found 4 processor cores
[   20.168165] vboxdrv: TSC mode is Invariant, tentative frequency 3691438116 Hz
[   20.168166] vboxdrv: Successfully loaded version 5.2.2_Deepin (interface 0x00290000)
[   20.215584] NET: Registered protocol family 15
[   20.242287] VBoxNetFlt: Successfully started.
[   20.302250] VBoxNetAdp: Successfully started.
[   20.315637] VBoxPciLinuxInit
[   20.315644] call_modprobe: pci-stub   2 
[   20.524366] vboxpci: IOMMU not found (not registered)
[   20.975599] Initializing XFRM netlink socket
[   23.178383] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   23.178979] Bridge firewalling registered
[   23.257576] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   23.368153] call_modprobe: iptable_filter   2 
[   23.643104] call_modprobe: ipt_addrtype   2 
[   23.701642] call_modprobe: iptable_nat   2 
[   23.744314] call_modprobe: nf_conntrack-2   2 
[   24.038025] Netfilter messages via NETLINK v0.30.
[   24.050219] ctnetlink v0.93: registering with nfnetlink.
[   24.066849] call_modprobe: ipt_MASQUERADE   2 
[   24.295850] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   24.352472] IPv6: ADDRCONF(NETDEV_UP): br-99e7fd4985bd: link is not ready
[   72.366776] call_modprobe: net-pf-16-proto-16-family-nl80211   2 
[  152.074307] call_modprobe: snd-seq   2 
[  152.108725] call_modprobe: snd-seq-client-14   2 
[ 3782.819105] perf: interrupt took too long (2551 > 2500), lowering kernel.perf_event_max_sample_rate to 78250
[ 4644.690633] perf: interrupt took too long (3219 > 3188), lowering kernel.perf_event_max_sample_rate to 62000
[ 8330.577070] perf: interrupt took too long (4138 > 4023), lowering kernel.perf_event_max_sample_rate to 48250
[28426.255514] perf: interrupt took too long (5230 > 5172), lowering kernel.perf_event_max_sample_rate to 38000
[62817.313429] usb 3-8: USB disconnect, device number 4
[63153.086372] usb 3-8: new high-speed USB device number 5 using xhci_hcd
[63153.234762] usb 3-8: New USB device found, idVendor=0781, idProduct=556b
[63153.234765] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[63153.234767] usb 3-8: Product: Cruzer Edge
[63153.234768] usb 3-8: Manufacturer: SanDisk
[63153.234769] usb 3-8: SerialNumber: 4C530399960111104322
[63153.235213] usb-storage 3-8:1.0: USB Mass Storage device detected
[63153.235672] scsi host4: usb-storage 3-8:1.0
[63154.247210] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.27 PQ: 0 ANSI: 6
[63154.247646] sd 4:0:0:0: Attached scsi generic sg1 type 0
[63154.248534] sd 4:0:0:0: [sdb] 61056064 512-byte logical blocks: (31.3 GB/29.1 GiB)
[63154.249633] sd 4:0:0:0: [sdb] Write Protect is off
[63154.249635] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[63154.250144] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[63154.259990]  sdb: sdb1
[63154.260912] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[77953.602553] r8169 0000:02:00.0: invalid short VPD tag 00 at offset 1
[77953.682130] call_modprobe: net-pf-31   2 
[77953.736578] call_modprobe: crypto-stdrng   2 
[77953.741415] call_modprobe: crypto-hmac(sha256)   2 
[77953.742052] call_modprobe: crypto-hmac(sha256)-all   2 
[77953.743856] call_modprobe: crypto-stdrng-all   2 
[77953.788869] Bluetooth: Core ver 2.22
[77953.788891] NET: Registered protocol family 31
[77953.788891] Bluetooth: HCI device and connection manager initialized
[77953.788895] Bluetooth: HCI socket layer initialized
[77953.788897] Bluetooth: L2CAP socket layer initialized
[77953.788902] Bluetooth: SCO socket layer initialized
[77960.713403] call_modprobe: fb1   2 
[77960.713985] call_modprobe: fb1   2 
[77960.714568] call_modprobe: fb1   2 
