[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=5bc2b338-3ca4-4ed4-9284-d3161b0569d1 ro splash quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf68cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf68d000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf757fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf758000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7e1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf7e2000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000013c000000-0x000000013fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000017bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 20041                           /Base Board Product Name, BIOS 29CN29WW(V2.06) 07/08/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x17c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask F80000000 write-back
[    0.000000]   5 base 17C000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff894880098000] 98000 size 24576
[    0.000000] BRK [0x8de09000, 0x8de09fff] PGTABLE
[    0.000000] BRK [0x8de0a000, 0x8de0afff] PGTABLE
[    0.000000] BRK [0x8de0b000, 0x8de0bfff] PGTABLE
[    0.000000] BRK [0x8de0c000, 0x8de0cfff] PGTABLE
[    0.000000] BRK [0x8de0d000, 0x8de0dfff] PGTABLE
[    0.000000] BRK [0x8de0e000, 0x8de0efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32177000-0x350b2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BF7FE120 000094 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000BF7EE000 00ADEC (v02 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000BF76A000 000040
[    0.000000] ACPI: FACS 0x00000000BF76A000 000040
[    0.000000] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000BF7FA000 00008C (v02 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: SLIX 0x00000000BF7ED000 000176 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 0x00000000BF7EA000 000028 (v01 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BF7E9000 000C39 (v01 INTEL  SataPri  00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000BF7E8000 0006C5 (v01 INTEL  SataSec  00001000 INTL 20051117)
[    0.000000] ACPI: ASPT 0x00000000BF7E6000 000034 (v04 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: WDRT 0x00000000BF7E5000 000047 (v01 INTEL  Calpella 00000000 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BF7E4000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000BF7E3000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000BF7E2000 00049F (v01 PmRef  ApTst    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17bff8000-0x17bffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017bffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf68cfff]
[    0.000000]   node   0: [mem 0x00000000bf6bf000-0x00000000bf757fff]
[    0.000000]   node   0: [mem 0x00000000bf7bf000-0x00000000bf7e1fff]
[    0.000000]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013bffffff]
[    0.000000]   node   0: [mem 0x0000000140000000-0x000000017bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017bffffff]
[    0.000000] On node 0 totalpages: 1275623
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12190 pages used for memmap
[    0.000000]   DMA32 zone: 780106 pages, LIFO batch:31
[    0.000000]   Normal zone: 7936 pages used for memmap
[    0.000000]   Normal zone: 491520 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf68d000-0xbf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf758000-0xbf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7e2000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x13c000000-0x13fffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff8949fbc00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1255412
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=5bc2b338-3ca4-4ed4-9284-d3161b0569d1 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4881912K/5102492K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 220580K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2393.759 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.51 BogoMIPS (lpj=9575036)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.015328] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.015374] Security Framework initialized
[    0.015376] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.015410] AppArmor: AppArmor initialized
[    0.018137] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.019645] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019726] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.019778] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.020084] CPU: Physical Processor ID: 0
[    0.020085] CPU: Processor Core ID: 0
[    0.020094] mce: CPU supports 9 MCE banks
[    0.020102] CPU0: Thermal monitoring enabled (TM1)
[    0.020111] process: using mwait in idle threads
[    0.020115] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.020115] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.020116] Applying alternatives
[    0.020186] Applying alternatives done
[    0.020187] Applying alternatives smp done
[    0.020235] Freeing SMP alternatives memory: 28K
[    0.024102] smpboot: Max logical packages: 4
[    0.024606] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.080027] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.080073] core: CPUID marked event: 'bus cycles' unavailable
[    0.080077] ... version:                3
[    0.080079] ... bit width:              48
[    0.080080] ... generic registers:      4
[    0.080082] ... value mask:             0000ffffffffffff
[    0.080084] ... max period:             000000007fffffff
[    0.080085] ... fixed-purpose events:   3
[    0.080087] ... event mask:             000000070000000f
[    0.088008] Hierarchical SRCU implementation.
[    0.104326] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.112007] smp: Bringing up secondary CPUs ...
[    0.144084] x86: Booting SMP configuration:
[    0.144088] .... node  #0, CPUs:      #1 #2 #3
[    0.210388] smp: Brought up 1 node, 4 CPUs
[    0.210388] smpboot: Total of 4 processors activated (19150.07 BogoMIPS)
[    0.212427] devtmpfs: initialized
[    0.212427] x86/mm: Memory block size: 128MB
[    0.212708] PM: Registering ACPI NVS region [mem 0xbf758000-0xbf7befff] (421888 bytes)
[    0.212708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.212708] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.212708] pinctrl core: initialized pinctrl subsystem
[    0.212708] NET: Registered protocol family 16
[    0.212708] cpuidle: using governor ladder
[    0.216021] cpuidle: using governor menu
[    0.216072] Simple Boot Flag at 0x44 set to 0x1
[    0.216092] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.216094] ACPI: bus type PCI registered
[    0.216096] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.216167] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.216176] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.216176] PCI: Using configuration type 1 for base access
[    0.216198] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.216199] mtrr: probably your BIOS does not setup all CPUs.
[    0.216199] mtrr: corrected configuration.
[    0.216943] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.220036] ACPI: Added _OSI(Module Device)
[    0.220038] ACPI: Added _OSI(Processor Device)
[    0.220039] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.220040] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220314] ACPI: Executed 1 blocks of module-level executable AML code
[    0.223849] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.224316] ACPI: Dynamic OEM Table Load:
[    0.224324] ACPI: SSDT 0xFFFF8949F4D65000 000424 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.224605] ACPI: Dynamic OEM Table Load:
[    0.224611] ACPI: SSDT 0xFFFF8949F6135000 0005CD (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.225196] ACPI: Dynamic OEM Table Load:
[    0.225202] ACPI: SSDT 0xFFFF8949F4DCB800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.225510] ACPI: Dynamic OEM Table Load:
[    0.225515] ACPI: SSDT 0xFFFF8949F4C68400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.226428] ACPI: EC: EC started
[    0.226429] ACPI: EC: interrupt blocked
[    0.229341] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.229343] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.229345] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.229346] ACPI: Interpreter enabled
[    0.229381] ACPI: (supports S0 S3 S4 S5)
[    0.229383] ACPI: Using IOAPIC for interrupt routing
[    0.229420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.229770] ACPI: Enabled 17 GPEs in block 00 to 3F
[    0.295630] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.295636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.295678] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.296321] PCI host bridge to bus 0000:00
[    0.296324] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.296325] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.296327] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.296328] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[    0.296330] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.296339] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.296363] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.296460] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.296496] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.296630] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.296662] pci 0000:00:16.0: reg 0x10: [mem 0xdb105900-0xdb10590f 64bit]
[    0.296756] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.296868] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.297650] pci 0000:00:1a.0: reg 0x10: [mem 0xdb105400-0xdb1057ff]
[    0.299995] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.300118] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.300150] pci 0000:00:1b.0: reg 0x10: [mem 0xdb100000-0xdb103fff 64bit]
[    0.300258] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.300378] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.300486] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.300603] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.300709] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.300824] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.300929] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.301047] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.301153] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.301271] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.302054] pci 0000:00:1d.0: reg 0x10: [mem 0xdb105000-0xdb1053ff]
[    0.304247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.304355] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.304527] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.304730] pci 0000:00:1f.2: [8086:3b28] type 00 class 0x01018f
[    0.304754] pci 0000:00:1f.2: reg 0x10: [io  0x6078-0x607f]
[    0.304765] pci 0000:00:1f.2: reg 0x14: [io  0x608c-0x608f]
[    0.304775] pci 0000:00:1f.2: reg 0x18: [io  0x6070-0x6077]
[    0.304786] pci 0000:00:1f.2: reg 0x1c: [io  0x6088-0x608b]
[    0.304796] pci 0000:00:1f.2: reg 0x20: [io  0x6050-0x605f]
[    0.304807] pci 0000:00:1f.2: reg 0x24: [io  0x6040-0x604f]
[    0.304948] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.304975] pci 0000:00:1f.3: reg 0x10: [mem 0xdb105800-0xdb1058ff 64bit]
[    0.305005] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.305134] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[    0.305159] pci 0000:00:1f.5: reg 0x10: [io  0x6068-0x606f]
[    0.305169] pci 0000:00:1f.5: reg 0x14: [io  0x6084-0x6087]
[    0.305180] pci 0000:00:1f.5: reg 0x18: [io  0x6060-0x6067]
[    0.305190] pci 0000:00:1f.5: reg 0x1c: [io  0x6080-0x6083]
[    0.305200] pci 0000:00:1f.5: reg 0x20: [io  0x6030-0x603f]
[    0.305211] pci 0000:00:1f.5: reg 0x24: [io  0x6020-0x602f]
[    0.305403] pci 0000:01:00.0: [10de:0a75] type 00 class 0x030000
[    0.305427] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.305439] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.305452] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.305461] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    0.305470] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.305478] pci 0000:01:00.0: enabling Extended Tags
[    0.305600] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.305619] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[    0.305668] pci 0000:01:00.1: enabling Extended Tags
[    0.305786] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.305788] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.305790] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.305793] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.305866] acpiphp: Slot [1] registered
[    0.305872] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.305877] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.305881] pci 0000:00:1c.0:   bridge window [mem 0xda100000-0xdb0fffff]
[    0.305888] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.305988] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000
[    0.306036] pci 0000:06:00.0: reg 0x10: [mem 0xd9100000-0xd910ffff 64bit]
[    0.306208] pci 0000:06:00.0: supports D1
[    0.306209] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    0.320053] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.320062] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.320069] pci 0000:00:1c.1:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.320081] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.320244] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[    0.320364] pci 0000:07:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.320473] pci 0000:07:00.0: reg 0x18: [mem 0xd5110000-0xd5110fff 64bit pref]
[    0.320573] pci 0000:07:00.0: reg 0x20: [mem 0xd5100000-0xd510ffff 64bit pref]
[    0.320618] pci 0000:07:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.320936] pci 0000:07:00.0: supports D1 D2
[    0.320937] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.321189] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.321193] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.321197] pci 0000:00:1c.2:   bridge window [mem 0xd8100000-0xd90fffff]
[    0.321204] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.321276] acpiphp: Slot [1-1] registered
[    0.321282] pci 0000:00:1c.4: PCI bridge to [bus 08-0b]
[    0.321287] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.321291] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff]
[    0.321298] pci 0000:00:1c.4:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.321378] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[    0.321391] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.321392] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.321394] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.321395] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[    0.352787] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.352851] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.352911] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.352973] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.353033] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.353095] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.353156] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.353217] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.353270] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.353274] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.353278] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.353370] PCI host bridge to bus 0000:ff
[    0.353372] pci_bus 0000:ff: root bus resource [bus ff]
[    0.353377] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.353427] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.353484] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.353532] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.353579] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.353625] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.356004] ACPI: EC: interrupt unblocked
[    0.356004] ACPI: EC: event unblocked
[    0.356004] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.356004] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.356021] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.356021] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.356021] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.356021] vgaarb: loaded
[    0.356043] EDAC MC: Ver: 3.0.0
[    0.356159] PCI: Using ACPI for IRQ routing
[    0.364016] PCI: pci_cache_line_size set to 64 bytes
[    0.364104] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.364106] e820: reserve RAM buffer [mem 0xbf68d000-0xbfffffff]
[    0.364107] e820: reserve RAM buffer [mem 0xbf758000-0xbfffffff]
[    0.364108] e820: reserve RAM buffer [mem 0xbf7e2000-0xbfffffff]
[    0.364109] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.364245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.364245] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.368001] clocksource: Switched to clocksource hpet
[    0.380806] VFS: Disk quotas dquot_6.6.0
[    0.380844] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.380990] AppArmor: AppArmor Filesystem Enabled
[    0.381017] pnp: PnP ACPI init
[    0.408172] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io  0x1000-0x1fff]
[    0.408237] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.408239] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.408241] system 00:00: [io  0xffff] has been reserved
[    0.408243] system 00:00: [io  0xffff] has been reserved
[    0.408244] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.408246] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.408253] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.408287] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.408368] pnp 00:02: Plug and Play ACPI device, IDs SYN0728 SYN0700 SYN0002 PNP0f13 (active)
[    0.408416] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.408902] pnp 00:04: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.408907] pnp 00:04: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0xfffe0000-0xffffffff pref]
[    0.408937] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.408939] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.408941] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.408943] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.408945] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.408947] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.408949] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.408951] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.408953] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.408957] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.409115] pnp: PnP ACPI: found 5 devices
[    0.415968] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.415974] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.415976] pci 0000:07:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.416042] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    0.416044] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.416047] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.416049] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.416052] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.416055] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.416058] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.416064] pci 0000:00:1c.0:   bridge window [mem 0xda100000-0xdb0fffff]
[    0.416068] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.416075] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.416078] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.416084] pci 0000:00:1c.1:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.416088] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.416096] pci 0000:07:00.0: BAR 6: assigned [mem 0xd8100000-0xd811ffff pref]
[    0.416098] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.416101] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.416106] pci 0000:00:1c.2:   bridge window [mem 0xd8100000-0xd90fffff]
[    0.416111] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.416118] pci 0000:00:1c.4: PCI bridge to [bus 08-0b]
[    0.416121] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.416126] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff]
[    0.416131] pci 0000:00:1c.4:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.416138] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[    0.416152] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.416154] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.416155] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.416157] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window]
[    0.416158] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.416159] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.416160] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.416162] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.416163] pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff]
[    0.416165] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.416166] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.416167] pci_bus 0000:06: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.416169] pci_bus 0000:06: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.416170] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.416172] pci_bus 0000:07: resource 1 [mem 0xd8100000-0xd90fffff]
[    0.416173] pci_bus 0000:07: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.416175] pci_bus 0000:08: resource 0 [io  0x1000-0x1fff]
[    0.416176] pci_bus 0000:08: resource 1 [mem 0xd7100000-0xd80fffff]
[    0.416177] pci_bus 0000:08: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.416179] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7 window]
[    0.416180] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff window]
[    0.416182] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.416183] pci_bus 0000:0c: resource 7 [mem 0xc0000000-0xfeafffff window]
[    0.416326] NET: Registered protocol family 2
[    0.416562] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.416819] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.417165] TCP: Hash tables configured (established 65536 bind 65536)
[    0.417226] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.417274] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.417385] NET: Registered protocol family 1
[    0.456246] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.456284] PCI: CLS 64 bytes, default 64
[    0.456343] Unpacking initramfs...
[    1.306541] Freeing initrd memory: 48368K
[    1.306547] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.306550] software IO TLB [mem 0xbb68d000-0xbf68d000] (64MB) mapped at [ffff89493b68d000-ffff89493f68cfff]
[    1.307132] audit: initializing netlink subsys (disabled)
[    1.307223] audit: type=2000 audit(1525603411.304:1): state=initialized audit_enabled=0 res=1
[    1.307594] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.307649] zbud: loaded
[    1.729023] Key type asymmetric registered
[    1.729025] Asymmetric key parser 'x509' registered
[    1.729047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.729106] io scheduler noop registered
[    1.729108] io scheduler deadline registered
[    1.729126] io scheduler cfq registered (default)
[    1.729127] io scheduler mq-deadline registered
[    1.730154] intel_idle: disabled
[    1.730335] Monitor-Mwait will be used to enter C-1 state
[    1.730340] Monitor-Mwait will be used to enter C-2 state
[    1.732720] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.733219] Linux agpgart interface v0.103
[    1.733345] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.733345] AMD IOMMUv2 functionality not available on this system
[    1.733710] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS2] at 0x60,0x64 irq 1,12
[    1.750426] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.750462] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.750576] mousedev: PS/2 mouse device common for all mice
[    1.750889] rtc_cmos 00:01: RTC can wake from S4
[    1.751040] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.751070] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.751148] ledtrig-cpu: registered to indicate activity on CPUs
[    1.751519] NET: Registered protocol family 10
[    1.751787] Segment Routing with IPv6
[    1.751803] mip6: Mobile IPv6
[    1.751805] NET: Registered protocol family 17
[    1.751807] mpls_gso: MPLS GSO support
[    1.752087] microcode: sig=0x20655, pf=0x10, revision=0x2
[    1.752252] microcode: Microcode Update Driver: v2.2.
[    1.752263] sched_clock: Marking stable (1752242996, 0)->(2016512373, -264269377)
[    1.752520] registered taskstats version 1
[    1.752538] zswap: loaded using pool lzo/zbud
[    1.752626] AppArmor: AppArmor sha1 policy hashing enabled
[    1.752629] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.753069] rtc_cmos 00:01: setting system clock to 2018-05-06 10:43:32 UTC (1525603412)
[    1.755463] Freeing unused kernel memory: 1460K
[    1.755465] Write protecting the kernel read-only data: 16384k
[    1.756373] Freeing unused kernel memory: 2012K
[    1.759203] Freeing unused kernel memory: 1036K
[    1.766340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.769521] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.769523] x86/mm: Checking user space page tables
[    1.780623] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.840046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input2
[    1.840064] ACPI: Power Button [PWRB]
[    1.840131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input3
[    1.840142] ACPI: Sleep Button [SLPB]
[    1.840301] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input4
[    1.840367] ACPI: Lid Switch [LID0]
[    1.840469] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.840487] ACPI: Power Button [PWRF]
[    1.841333] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.843526] acpi device:0a: registered as cooling_device4
[    1.843604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input6
[    1.858000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.858024] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.858729] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.858941] r8169 0000:07:00.0 eth0: RTL8102e at 0xffff975280c8d000, 88:ae:1d:d1:22:90, XID 04e00000 IRQ 24
[    1.861719] SCSI subsystem initialized
[    1.864300] ACPI: Invalid active0 threshold
[    1.865068] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.865705] thermal LNXTHERM:00: registered as thermal_zone0
[    1.865708] ACPI: Thermal Zone [TZ00] (35 C)
[    1.873231] ACPI: bus type USB registered
[    1.873266] usbcore: registered new interface driver usbfs
[    1.873279] usbcore: registered new interface driver hub
[    1.873308] usbcore: registered new device driver usb
[    1.874905] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.875173] ehci-pci: EHCI PCI platform driver
[    1.876234] libata version 3.00 loaded.
[    1.885366] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.885378] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.885401] ehci-pci 0000:00:1a.0: debug port 2
[    1.890491] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.890518] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdb105400
[    1.899107] r8169 0000:07:00.0 enp7s0: renamed from eth0
[    1.904883] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.904989] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.904992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.904993] usb usb1: Product: EHCI Host Controller
[    1.904995] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.904996] usb usb1: SerialNumber: 0000:00:1a.0
[    1.905210] hub 1-0:1.0: USB hub found
[    1.905226] hub 1-0:1.0: 3 ports detected
[    1.905736] nouveau 0000:01:00.0: NVIDIA GT218 (0a8a80b1)
[    1.905739] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.905745] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.905763] ehci-pci 0000:00:1d.0: debug port 2
[    1.909735] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.909762] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdb105000
[    1.924140] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.924267] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.924269] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.924270] usb usb2: Product: EHCI Host Controller
[    1.924271] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.924272] usb usb2: SerialNumber: 0000:00:1d.0
[    1.924495] hub 2-0:1.0: USB hub found
[    1.924503] hub 2-0:1.0: 3 ports detected
[    1.924710] ata_piix 0000:00:1f.2: version 2.13
[    1.924885] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.942715] nouveau 0000:01:00.0: bios: version 70.18.4b.00.08
[    1.944055] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[    1.998922] [TTM] Zone  kernel: Available graphics memory: 2467408 kiB
[    1.998925] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.998927] [TTM] Initializing pool allocator
[    1.998937] [TTM] Initializing DMA pool allocator
[    1.998973] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[    1.998977] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.998984] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    1.998988] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.998993] nouveau 0000:01:00.0: DRM: DCB outp 00: 01010323 00010034
[    1.998998] nouveau 0000:01:00.0: DRM: DCB outp 01: 02001300 00000000
[    1.999002] nouveau 0000:01:00.0: DRM: DCB outp 02: 02025362 00020010
[    1.999005] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[    1.999009] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    1.999012] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000310
[    1.999015] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000311
[    1.999018] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000313
[    1.999021] nouveau 0000:01:00.0: DRM: DCB conn 05: 00002461
[    2.026072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.026074] [drm] Driver supports precise vblank timestamp query.
[    2.076480] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    2.085997] scsi host0: ata_piix
[    2.086163] scsi host1: ata_piix
[    2.086246] ata1: SATA max UDMA/133 cmd 0x6078 ctl 0x608c bmdma 0x6050 irq 19
[    2.086254] ata2: SATA max UDMA/133 cmd 0x6070 ctl 0x6088 bmdma 0x6058 irq 19
[    2.086449] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    2.134287] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x70000, bo ffff8949eaa39000
[    2.136275] fbcon: nouveaufb (fb0) is primary device
[    2.240164] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.245050] scsi host2: ata_piix
[    2.245296] scsi host3: ata_piix
[    2.245382] ata3: SATA max UDMA/133 cmd 0x6068 ctl 0x6084 bmdma 0x6030 irq 21
[    2.245392] ata4: SATA max UDMA/133 cmd 0x6060 ctl 0x6080 bmdma 0x6038 irq 21
[    2.260162] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.332264] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[    2.332278] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
[    2.396691] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.396695] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.397123] hub 1-1:1.0: USB hub found
[    2.397246] hub 1-1:1.0: 6 ports detected
[    2.416824] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.416828] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.417242] hub 2-1:1.0: USB hub found
[    2.417364] hub 2-1:1.0: 8 ports detected
[    2.572198] ata3: SATA link down (SStatus 0 SControl 300)
[    2.704169] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    2.856169] psmouse serio1: synaptics: queried max coordinates: x [..5590], y [..4508]
[    2.928593] usb 2-1.3: New USB device found, idVendor=5986, idProduct=0148
[    2.928597] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    2.928600] usb 2-1.3: Product: Lenovo EasyCamera
[    2.928603] usb 2-1.3: Manufacturer: Bison Electronics Inc.
[    2.963477] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 505504
[    3.028169] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[    3.032239] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    3.140615] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b
[    3.140617] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.140618] usb 2-1.4: Product: USB Receiver
[    3.140619] usb 2-1.4: Manufacturer: Logitech
[    3.144055] hidraw: raw HID events driver (C) Jiri Kosina
[    3.152657] usbcore: registered new interface driver usbhid
[    3.152658] usbhid: USB HID core driver
[    3.153851] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input2
[    3.284188] ata4: failed to resume link (SControl 0)
[    3.295938] ata4: SATA link down (SStatus 4 SControl 0)
[    3.305033] input: Logitech M315/235/317 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0003/0003:046D:4009.0004/input/input8
[    3.305239] logitech-hidpp-device 0003:046D:4009.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/235/317] on usb-0000:00:1d.0-1.4:1
[    3.356492] clocksource: Switched to clocksource tsc
[    3.436168] ata1.01: failed to resume link (SControl 0)
[    3.440167] ata2.01: failed to resume link (SControl 0)
[    3.548256] Console: switching to colour frame buffer device 170x48
[    3.564884] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.580110] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    3.596240] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.596260] ata1.01: SATA link down (SStatus 0 SControl 0)
[    3.604234] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.604258] ata2.01: SATA link down (SStatus 0 SControl 0)
[    3.604278] ata2.01: link offline, clearing class 3 to NONE
[    3.624442] ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JL61, max UDMA/100
[    3.648412] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
[    3.648414] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.648490] ata2.00: configured for UDMA/100
[    3.796849] ata1.00: configured for UDMA/133
[    3.797249] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
[    3.801949] scsi 1:0:0:0: CD-ROM            Slimtype DVD A DS8A4S     JL61 PQ: 0 ANSI: 5
[    3.817332] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.817334] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.817356] sd 0:0:0:0: [sda] Write Protect is off
[    3.817359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.817404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.839932] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    3.839936] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.840129] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.873415]  sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[    3.874690] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.836169] raid6: sse2x1   gen()  2532 MB/s
[    4.884159] raid6: sse2x1   xor()  1688 MB/s
[    4.932064] raid6: sse2x2   gen()  6612 MB/s
[    4.980067] raid6: sse2x2   xor()  5227 MB/s
[    5.028120] raid6: sse2x4   gen()  7370 MB/s
[    5.076078] raid6: sse2x4   xor()  2278 MB/s
[    5.076081] raid6: using algorithm sse2x4 gen() 7370 MB/s
[    5.076083] raid6: .... xor() 2278 MB/s, rmw enabled
[    5.076085] raid6: using ssse3x2 recovery algorithm
[    5.076887] xor: measuring software checksum speed
[    5.116070]    prefetch64-sse: 10033.000 MB/sec
[    5.156066]    generic_sse:  3426.000 MB/sec
[    5.156069] xor: using function: prefetch64-sse (10033.000 MB/sec)
[    5.156733] async_tx: api initialized (async)
[    5.778408] Btrfs loaded, crc32c=crc32c-intel
[    6.823297] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    7.260756] random: crng init done
[    8.337208] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    8.666202] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.761493] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    8.761659] systemd[1]: Detected architecture x86-64.
[    8.771493] systemd[1]: Set hostname to <baicai>.
[   10.177456] systemd[1]: Created slice System Slice.
[   10.178654] systemd[1]: Mounting Huge Pages File System...
[   10.178820] systemd[1]: Listening on Journal Audit Socket.
[   10.178928] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.178960] systemd[1]: Reached target Swap.
[   10.179021] systemd[1]: Listening on udev Kernel Socket.
[   10.179561] systemd[1]: Created slice User and Session Slice.
[   10.613400] call_modprobe: parport_lowlevel   2 
[   10.822477] lp: driver loaded but no devices found
[   10.925398] call_modprobe: parport_lowlevel   2 
[   10.926400] ppdev: user-space parallel port driver
[   11.052768] fuse init (API version 7.26)
[   11.217439] call_modprobe: sch_fq   2 
[   11.294870] call_modprobe: fs-binfmt_misc   2 
[   12.376232] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[   12.547271] systemd-journald[257]: Received request to flush runtime journal from PID 1
[   13.144417] call_modprobe: netdev---all   2 
[   13.168934] call_modprobe: --all   2 
[   13.169890] call_modprobe: netdev---all   2 
[   13.170611] call_modprobe: --all   2 
[   13.224528] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.513441] ACPI: Battery Slot [BAT1] (battery present)
[   13.513751] ACPI: AC Adapter [ACAD] (on-line)
[   14.278590] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[   14.278598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.278601] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   14.278605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.278605] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   14.278608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.278609] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   14.278612] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.278613] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.839889] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.839935] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   15.965145] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   15.982275] media: Linux media interface: v0.10
[   16.449644] Linux video capture interface: v2.00
[   16.645717] iTCO_vendor_support: vendor-support=0
[   16.665938] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input10
[   16.735453] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   16.735509] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   16.735632] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.804163] ath: phy0: Enable LNA combining
[   17.806706] ath: phy0: ASPM enabled: 0x43
[   17.806708] ath: EEPROM regdomain: 0x6a
[   17.806709] ath: EEPROM indicates we should expect a direct regpair map
[   17.806711] ath: Country alpha2 being used: 00
[   17.806712] ath: Regpair used: 0x6a
[   17.808436] call_modprobe: crypto-arc4   2 
[   17.910709] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0148)
[   17.913244] uvcvideo 2-1.3:1.0: Entity type for entity Extension 6 was not initialized!
[   17.913246] uvcvideo 2-1.3:1.0: Entity type for entity Processing 5 was not initialized!
[   17.913248] uvcvideo 2-1.3:1.0: Entity type for entity Selector 4 was not initialized!
[   17.913249] uvcvideo 2-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   17.913333] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input11
[   17.913412] usbcore: registered new interface driver uvcvideo
[   17.913413] USB Video Class driver (1.1.1)
[   19.556949] snd_hda_intel 0000:01:00.1: Disabling MSI
[   19.556958] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   19.563945] call_modprobe: hdaudio:v14F15069r00100302a01
                  2 
[   19.787238] snd_hda_codec_conexant hdaudioC0D1: CX20585: BIOS auto-probing.
[   19.787670] snd_hda_codec_conexant hdaudioC0D1: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   19.787672] snd_hda_codec_conexant hdaudioC0D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.787673] snd_hda_codec_conexant hdaudioC0D1:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   19.787674] snd_hda_codec_conexant hdaudioC0D1:    mono: mono_out=0x0
[   19.787675] snd_hda_codec_conexant hdaudioC0D1:    inputs:
[   19.787677] snd_hda_codec_conexant hdaudioC0D1:      Mic=0x1b
[   19.787679] snd_hda_codec_conexant hdaudioC0D1:      Internal Mic=0x1a
[   19.788800] snd_hda_codec_conexant hdaudioC0D1: Enable sync_write for stable communication
[   19.792322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   19.792528] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   19.792595] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   20.219006] call_modprobe: crypto-arc4-all   2 
[   20.219916] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.220414] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffff975281690000, irq=17
[   20.308213] call_modprobe: hdaudio:v10DE000Br00100200a01
                  2 
[   21.416832] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   21.416931] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   21.417020] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   21.417108] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   21.554207] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   22.146154] wl: loading out-of-tree module taints kernel.
[   22.146159] wl: module license 'MIXED/Proprietary' taints kernel.
[   22.146160] Disabling lock debugging due to kernel taint
[   23.025844] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[   23.313038] NET: Registered protocol family 15
[   25.979904] Initializing XFRM netlink socket
[   27.827602] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   27.845362] r8169 0000:07:00.0 enp7s0: link down
[   27.845444] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   27.849448] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   27.864833] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   29.874724] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   31.737244] wlp6s0: authenticate with fc:8b:97:73:8d:42
[   31.756207] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[   31.757986] wlp6s0: authenticated
[   31.760085] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[   31.763884] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=10)
[   31.764025] wlp6s0: associated
[   31.772665] call_modprobe: crypto-ccm(aes)   2 
[   31.773630] call_modprobe: crypto-ccm(aes)-all   2 
[   31.774408] call_modprobe: crypto-ccm   2 
[   32.559927] call_modprobe: crypto-cbcmac(aes)   2 
[   32.560957] call_modprobe: crypto-cbcmac(aes)-all   2 
[   32.561869] call_modprobe: crypto-ctr(aes)   2 
[   32.562622] call_modprobe: crypto-ctr(aes)-all   2 
[   32.563328] call_modprobe: crypto-ctr   2 
[   32.730920] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[  446.597409] wlp6s0: authenticate with fc:8b:97:73:8d:42
[  446.615464] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[  446.676468] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[  446.734837] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[  446.819012] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[  448.237893] wlp6s0: authenticate with fc:8b:97:73:8d:42
[  448.254648] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[  448.345902] wlp6s0: authenticated
[  448.350287] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[  448.354293] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=10)
[  448.354448] wlp6s0: associated
[  517.471096] logitech-hidpp-device 0003:046D:4009.0004: HID++ 2.0 device connected.
[  617.851529] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[  693.377307] perf: interrupt took too long (3178 > 3167), lowering kernel.perf_event_max_sample_rate to 62750
[  995.351806] perf: interrupt took too long (3979 > 3972), lowering kernel.perf_event_max_sample_rate to 50250
[ 1638.793775] perf: interrupt took too long (4980 > 4973), lowering kernel.perf_event_max_sample_rate to 40000
[ 2708.664047] call_modprobe: snd-seq   2 
[ 2708.748054] call_modprobe: snd-seq-client-14   2 
[11391.328848] perf: interrupt took too long (6370 > 6225), lowering kernel.perf_event_max_sample_rate to 31250
[13467.843446] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13467.859762] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13467.945293] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[13468.009078] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[13468.067536] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[13469.533730] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13469.551944] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13469.625676] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[13469.682600] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[13469.735891] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[13471.715183] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13471.731354] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13471.797862] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[13471.896766] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[13471.989344] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[13482.033458] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[13482.643719] request_firmware: nouveau/nva8_fuc084
[13482.698415] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[13482.698423] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[13482.698427] request_firmware: nouveau/nva8_fuc084d
[13482.698440] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[13482.698442] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[13482.698445] nouveau 0000:01:00.0: msvld: unable to load firmware data
[13482.698448] nouveau 0000:01:00.0: msvld: init failed, -19
[13483.379939] request_firmware: nouveau/nva8_fuc084
[13483.379968] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[13483.379975] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[13483.379978] request_firmware: nouveau/nva8_fuc084d
[13483.379988] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[13483.379991] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[13483.379995] nouveau 0000:01:00.0: msvld: unable to load firmware data
[13483.379998] nouveau 0000:01:00.0: msvld: init failed, -19
[13484.000334] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13484.013909] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13484.294349] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[13484.429509] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[13484.640882] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[13495.570083] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13495.587188] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13495.672565] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[13495.725001] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[13495.780023] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[13508.895346] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[13510.741536] wlp6s0: authenticate with fc:8b:97:73:8d:42
[13510.760646] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[13510.778351] wlp6s0: authenticated
[13510.786796] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[13510.858692] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[13510.881975] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=10)
[13510.882130] wlp6s0: associated
[13510.889721] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[25483.718762] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25483.735388] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25483.743519] wlp6s0: authenticated
[25483.746893] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25483.751000] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=10)
[25483.751154] wlp6s0: associated
[25547.716367] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25547.733644] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25547.796272] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[25547.915982] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[25547.970470] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[25549.389254] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25549.406436] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25549.566813] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[25549.640750] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[25549.775188] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[25551.694784] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25551.713993] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25551.748234] wlp6s0: authenticated
[25551.749295] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25551.784349] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=10)
[25551.784469] wlp6s0: associated
[25609.711075] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25609.728567] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25609.734470] wlp6s0: authenticated
[25609.735974] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25609.832088] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[25609.894131] wlp6s0: associate with fc:8b:97:73:8d:42 (try 3/3)
[25609.983987] wlp6s0: association with fc:8b:97:73:8d:42 timed out
[25611.453644] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25611.472208] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25611.628951] wlp6s0: authenticated
[25611.631930] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25611.748546] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[25611.826753] wlp6s0: associate with fc:8b:97:73:8d:42 (try 3/3)
[25611.920475] wlp6s0: association with fc:8b:97:73:8d:42 timed out
[25613.887572] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25613.904178] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25613.910338] wlp6s0: authenticated
[25613.911877] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25614.051692] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[25614.210811] wlp6s0: associate with fc:8b:97:73:8d:42 (try 3/3)
[25614.370831] wlp6s0: association with fc:8b:97:73:8d:42 timed out
[25623.873448] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[25625.872916] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25625.891840] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25625.894792] wlp6s0: authenticated
[25625.899608] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25625.907149] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[25625.907306] wlp6s0: associated
[25625.914853] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[25679.709420] wlp6s0: authenticate with fc:8b:97:73:8d:42
[25679.726908] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[25679.734012] wlp6s0: authenticated
[25679.734406] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[25679.744291] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[25679.744451] wlp6s0: associated
[29194.673092] wlp6s0: authenticate with fc:8b:97:73:8d:42
[29194.691048] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[29194.699511] wlp6s0: authenticated
[29194.702590] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[29194.720306] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[29194.720463] wlp6s0: associated
[38746.921418] deepin-system-m[25919]: segfault at 0 ip           (null) sp 00007ffd7dbac2a8 error 14 in deepin-system-monitor[55df5dc0d000+e0000]
[39010.805010] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[39010.806573] Bridge firewalling registered
[39010.846056] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[39010.925644] call_modprobe: iptable_filter   2 
[39011.059160] call_modprobe: ipt_addrtype   2 
[39011.079607] call_modprobe: iptable_nat   2 
[39011.081790] call_modprobe: nf_conntrack-2   2 
[39011.268922] Netfilter messages via NETLINK v0.30.
[39011.285863] ctnetlink v0.93: registering with nfnetlink.
[39011.304732] call_modprobe: ipt_MASQUERADE   2 
[39083.682690] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39083.703679] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39083.906749] wlp6s0: authenticated
[39083.909873] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39083.937876] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39083.937995] wlp6s0: associated
[39128.859053] request_firmware: nouveau/nva8_fuc084
[39128.859072] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[39128.859077] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[39128.859079] request_firmware: nouveau/nva8_fuc084d
[39128.859086] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[39128.859088] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[39128.859090] nouveau 0000:01:00.0: msvld: unable to load firmware data
[39128.859092] nouveau 0000:01:00.0: msvld: init failed, -19
[39232.687640] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39232.706052] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39233.512781] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39234.536777] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[39235.022765] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[39240.752768] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39242.802947] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39242.816761] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39243.496687] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39243.719064] wlp6s0: authenticated
[39243.720683] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39243.871284] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39243.871400] wlp6s0: associated
[39249.854964] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[39272.733959] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39272.752689] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39272.796492] wlp6s0: authenticated
[39272.800474] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39272.828861] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39272.829020] wlp6s0: associated
[39278.807737] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[39291.942133] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39291.964088] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39291.996791] wlp6s0: authenticated
[39292.000334] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39292.192342] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[39292.231782] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39292.231941] wlp6s0: associated
[39298.250082] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[39311.181613] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39311.200652] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39311.247109] wlp6s0: authenticated
[39311.248186] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39311.287016] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39311.287176] wlp6s0: associated
[39316.628867] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[39406.898719] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39406.918366] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39407.527490] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39408.065283] wlp6s0: authenticated
[39408.067491] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39409.511475] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[39410.503464] wlp6s0: associate with fc:8b:97:73:8d:42 (try 3/3)
[39410.877976] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=6)
[39410.878138] wlp6s0: associated
[39411.467754] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 14=MIC_FAILURE)
[39422.264868] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39422.283787] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39422.312992] wlp6s0: authenticated
[39446.703463] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39472.696820] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39555.568033] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[39555.574612] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39555.593980] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39555.757214] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39595.263634] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[39595.269498] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39595.288554] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39595.447463] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39645.541766] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[39645.546440] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39645.565402] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39645.707117] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[39703.684163] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39703.697839] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39703.754956] wlp6s0: authenticated
[39703.757300] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39703.767285] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39703.767485] wlp6s0: associated
[39703.902851] request_firmware: nouveau/nva8_fuc084
[39703.902869] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[39703.902874] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[39703.902876] request_firmware: nouveau/nva8_fuc084d
[39703.902886] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[39703.902888] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[39703.902890] nouveau 0000:01:00.0: msvld: unable to load firmware data
[39703.902892] nouveau 0000:01:00.0: msvld: init failed, -19
[39704.380469] request_firmware: nouveau/nva8_fuc084
[39704.380493] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084 (-2)
[39704.380498] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[39704.380501] request_firmware: nouveau/nva8_fuc084d
[39704.380508] nouveau 0000:01:00.0: firmware: failed to load nouveau/nva8_fuc084d (-2)
[39704.380510] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[39704.380512] nouveau 0000:01:00.0: msvld: unable to load firmware data
[39704.380514] nouveau 0000:01:00.0: msvld: init failed, -19
[39704.645298] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 14=MIC_FAILURE)
[39713.770273] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39713.789813] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39713.815738] wlp6s0: authenticated
[39713.817213] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39713.864762] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39713.864912] wlp6s0: associated
[39714.550734] wlp6s0: disassociated from fc:8b:97:73:8d:42 (Reason: 14=MIC_FAILURE)
[39724.062639] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39724.081778] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39724.221149] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39724.361154] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[39724.461944] wlp6s0: authenticated
[39724.465195] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39724.470143] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39724.470296] wlp6s0: associated
[39726.558258] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[39859.168954] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39859.188809] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39859.468154] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39859.660024] wlp6s0: authenticated
[39859.668158] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39859.760113] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39859.760308] wlp6s0: associated
[39898.685138] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39898.705083] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39899.270056] wlp6s0: authenticated
[39899.271860] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39900.483944] wlp6s0: associate with fc:8b:97:73:8d:42 (try 2/3)
[39900.737080] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39900.737227] wlp6s0: associated
[39942.705903] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39942.725586] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39942.899424] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39942.956684] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[39943.013418] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[39944.486424] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39944.503776] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39944.579632] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 2/3)
[39944.622441] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 3/3)
[39944.700087] wlp6s0: authentication with fc:8b:97:73:8d:42 timed out
[39946.668649] wlp6s0: authenticate with fc:8b:97:73:8d:42
[39946.687826] wlp6s0: send auth to fc:8b:97:73:8d:42 (try 1/3)
[39946.690220] wlp6s0: authenticated
[39946.691367] wlp6s0: associate with fc:8b:97:73:8d:42 (try 1/3)
[39946.695214] wlp6s0: RX AssocResp from fc:8b:97:73:8d:42 (capab=0x411 status=0 aid=3)
[39946.695384] wlp6s0: associated
[40986.083331] sogou-qimpanel[30189]: segfault at 1c00000001 ip 0000001c00000001 sp 00007ffe07e3e778 error 14
[40995.736663] traps: deepin-system-m[3953] general protection ip:7fe18c5f5088 sp:7ffc2b08feb0 error:0 in libdtkwidget.so.2.0.7[7fe18c4b9000+259000]
[44396.673207] r8169 0000:07:00.0: invalid short VPD tag 00 at offset 1
[44396.827826] call_modprobe: net-pf-31   2 
[44396.845593] call_modprobe: crypto-stdrng   2 
[44396.861938] call_modprobe: crypto-hmac(sha256)   2 
[44396.863158] call_modprobe: crypto-hmac(sha256)-all   2 
[44396.865177] call_modprobe: crypto-stdrng-all   2 
[44396.923399] Bluetooth: Core ver 2.22
[44396.923435] NET: Registered protocol family 31
[44396.923436] Bluetooth: HCI device and connection manager initialized
[44396.923452] Bluetooth: HCI socket layer initialized
[44396.923455] Bluetooth: L2CAP socket layer initialized
[44396.923465] Bluetooth: SCO socket layer initialized
