[    0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.0-deepin2-amd64 root=UUID=f4f81326-3296-4101-aba9-00b37aac6c6a ro splash quiet intel_pstate=enable
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b80e9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b80ea000-0x00000000b80f0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b80f1000-0x00000000b893dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b893e000-0x00000000b8bedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9633fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9634000-0x00000000c97aafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9f57fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9f58000-0x00000000c9ffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xc9f56998  ACPI 2.0=0xc973c000  ACPI=0xc973c000  SMBIOS=0xc9f56598 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Notebook                         P65_P67SE                       /P65_P67SE                       , BIOS 1.03.01 07/22/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0420000000 mask 7FF0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable
[    0.000000]   6 base 00CB000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 042FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000c9f56998 to 0x00000000c9f569d0.
[    0.000000] Base memory trampoline at [ffffa0a0c0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x382809000, 0x382809fff] PGTABLE
[    0.000000] BRK [0x38280a000, 0x38280afff] PGTABLE
[    0.000000] BRK [0x38280b000, 0x38280bfff] PGTABLE
[    0.000000] BRK [0x38280c000, 0x38280cfff] PGTABLE
[    0.000000] BRK [0x38280d000, 0x38280dfff] PGTABLE
[    0.000000] BRK [0x38280e000, 0x38280efff] PGTABLE
[    0.000000] BRK [0x38280f000, 0x38280ffff] PGTABLE
[    0.000000] BRK [0x382810000, 0x382810fff] PGTABLE
[    0.000000] BRK [0x382811000, 0x382811fff] PGTABLE
[    0.000000] BRK [0x382812000, 0x382812fff] PGTABLE
[    0.000000] BRK [0x382813000, 0x382813fff] PGTABLE
[    0.000000] BRK [0x382814000, 0x382814fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x31eb6000-0x34f52fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C973C000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000C973C090 0000A4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C974E110 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C973C1D0 011F39 (v02 ALASKA A M I    00000038 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000C97AAF80 000040
[    0.000000] ACPI: APIC 0x00000000C974E220 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000C974E2B8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000C974E300 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000C974E3A0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 0x00000000C974E448 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C974F3E0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C974F920 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000C97503F8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C9750438 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C9750470 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9750788 001C47 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C97523D0 00113B (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: DMAR 0x00000000C9753510 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 0x00000000C97535C8 001CC9 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000C9755298 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x42fdf9000-0x42fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000042fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b80e9fff]
[    0.000000]   node   0: [mem 0x00000000b80f1000-0x00000000b893dfff]
[    0.000000]   node   0: [mem 0x00000000b8bee000-0x00000000c8c0afff]
[    0.000000]   node   0: [mem 0x00000000c910b000-0x00000000c9633fff]
[    0.000000]   node   0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000042fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff]
[    0.000000] On node 0 totalpages: 4164634
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12794 pages used for memmap
[    0.000000]   DMA32 zone: 818814 pages, LIFO batch:31
[    0.000000]   Normal zone: 52216 pages used for memmap
[    0.000000]   Normal zone: 3341824 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb80ea000-0xb80f0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb893e000-0xb8bedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8c0b000-0xc910afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9634000-0xc97aafff]
[    0.000000] PM: Registered nosave memory: [mem 0xc97ab000-0xc9f57fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9f58000-0xc9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffffa0a4efa00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4099538
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-deepin2-amd64 root=UUID=f4f81326-3296-4101-aba9-00b37aac6c6a ro splash quiet intel_pstate=enable
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16210964K/16658536K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 447572K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] tsc: Detected 2594.165 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.33 BogoMIPS (lpj=10376660)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.013285] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.013691] Security Framework initialized
[    0.013692] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013710] AppArmor: AppArmor initialized
[    0.015697] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.016707] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.016749] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.016782] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.016933] CPU: Physical Processor ID: 0
[    0.016933] CPU: Processor Core ID: 0
[    0.016937] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016937] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016940] mce: CPU supports 9 MCE banks
[    0.016947] CPU0: Thermal monitoring enabled (TM1)
[    0.016957] process: using mwait in idle threads
[    0.016959] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.016960] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.016960] Applying alternatives
[    0.017008] Applying alternatives done
[    0.017008] Applying alternatives smp done
[    0.017048] Freeing SMP alternatives memory: 28K
[    0.024666] smpboot: Max logical packages: 2
[    0.024669] DMAR: Host address width 39
[    0.024671] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.024677] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.024678] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.024681] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.024682] DMAR: RMRR base: 0x000000c9e7b000 end: 0x000000c9e89fff
[    0.024683] DMAR: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
[    0.024685] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.024685] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.024686] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.024910] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.024911] x2apic enabled
[    0.024916] Switched APIC routing to cluster x2apic.
[    0.025339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065036] TSC deadline timer enabled
[    0.065039] smpboot: CPU0: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.080019] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.080049] ... version:                3
[    0.080049] ... bit width:              48
[    0.080049] ... generic registers:      4
[    0.080050] ... value mask:             0000ffffffffffff
[    0.080050] ... max period:             00007fffffffffff
[    0.080051] ... fixed-purpose events:   3
[    0.080051] ... event mask:             000000070000000f
[    0.088015] Hierarchical SRCU implementation.
[    0.104142] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.112014] smp: Bringing up secondary CPUs ...
[    0.144032] x86: Booting SMP configuration:
[    0.144032] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.337149] smp: Brought up 1 node, 8 CPUs
[    0.337149] smpboot: Total of 8 processors activated (41506.64 BogoMIPS)
[    0.340371] devtmpfs: initialized
[    0.340371] x86/mm: Memory block size: 128MB
[    0.340974] PM: Registering ACPI NVS region [mem 0xb80ea000-0xb80f0fff] (28672 bytes)
[    0.340974] PM: Registering ACPI NVS region [mem 0xc9634000-0xc97aafff] (1536000 bytes)
[    0.340974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.340974] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.340974] pinctrl core: initialized pinctrl subsystem
[    0.340974] NET: Registered protocol family 16
[    0.340974] cpuidle: using governor ladder
[    0.340974] cpuidle: using governor menu
[    0.340974] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.340974] ACPI: bus type PCI registered
[    0.340974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.340974] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.340974] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.340974] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.340974] PCI: Using configuration type 1 for base access
[    0.340974] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.340974] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.340974] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.340974] ACPI: Added _OSI(Module Device)
[    0.340974] ACPI: Added _OSI(Processor Device)
[    0.340974] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.340974] ACPI: Added _OSI(Processor Aggregator Device)
[    0.340974] ACPI: Executed 1 blocks of module-level executable AML code
[    0.346472] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.348081] ACPI: Dynamic OEM Table Load:
[    0.348085] ACPI: SSDT 0xFFFFA0A4DD3D7400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.348181] ACPI: Dynamic OEM Table Load:
[    0.348185] ACPI: SSDT 0xFFFFA0A4DCC26800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.348450] ACPI: Dynamic OEM Table Load:
[    0.348450] ACPI: SSDT 0xFFFFA0A4DCC83C00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.349446] ACPI: EC: EC started
[    0.349446] ACPI: EC: interrupt blocked
[    0.349841] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.349842] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.349843] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.349843] ACPI: Interpreter enabled
[    0.349864] ACPI: (supports S0 S3 S4 S5)
[    0.349864] ACPI: Using IOAPIC for interrupt routing
[    0.349882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.350142] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.357712] ACPI: Power Resource [NVP3] (on)
[    0.357730] ACPI: Power Resource [NVP2] (on)
[    0.359714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.359718] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.359887] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.359984] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.359984] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.360275] PCI host bridge to bus 0000:00
[    0.360277] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.360278] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.360279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.360279] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.360280] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.360281] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.360281] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.360282] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.360283] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.360283] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.360284] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.360285] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.360285] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.360286] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.360287] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.360288] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.360289] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.360294] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.360368] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.360394] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.360481] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.360489] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.360493] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360495] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.360504] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.360560] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.360566] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
[    0.360646] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.360664] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
[    0.360715] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.360775] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.360793] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
[    0.360846] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.360911] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.360930] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
[    0.361001] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.361062] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.361078] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
[    0.361129] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.361190] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.361250] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.361338] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.361397] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.361483] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.361542] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.361629] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.361648] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
[    0.361719] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.361782] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[    0.361929] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.361942] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.361948] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.361954] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.361960] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.361966] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.361972] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
[    0.362002] pci 0000:00:1f.2: PME# supported from D3hot
[    0.362056] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.362072] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
[    0.362089] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.362189] pci 0000:01:00.0: [10de:13d8] type 00 class 0x030200
[    0.362201] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.362206] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.362212] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.362216] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.362220] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.376012] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.376014] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.376016] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.376019] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.376084] pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
[    0.376114] pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
[    0.388022] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.388028] pci 0000:00:1c.0:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.388103] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[    0.388131] pci 0000:03:00.0: reg 0x10: [mem 0xf7915000-0xf7915fff]
[    0.388175] pci 0000:03:00.0: reg 0x30: [mem 0xf7900000-0xf790ffff pref]
[    0.388261] pci 0000:03:00.0: supports D1 D2
[    0.388262] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.388345] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[    0.388375] pci 0000:03:00.1: reg 0x10: [io  0xd000-0xd0ff]
[    0.388402] pci 0000:03:00.1: reg 0x18: [mem 0xf7914000-0xf7914fff 64bit]
[    0.388420] pci 0000:03:00.1: reg 0x20: [mem 0xf7910000-0xf7913fff 64bit]
[    0.388509] pci 0000:03:00.1: supports D1 D2
[    0.388510] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400029] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.400032] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.400035] pci 0000:00:1c.4:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.400153] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[    0.400183] pci 0000:04:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.400208] pci 0000:04:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
[    0.400313] pci 0000:04:00.0: supports D1 D2
[    0.400313] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.412071] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.412075] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.412078] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.412875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412922] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412966] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413054] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413098] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413142] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413186] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.413517] ACPI: EC: interrupt unblocked
[    0.413523] ACPI: EC: event unblocked
[    0.413529] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.413530] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.413606] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.413606] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.413606] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.413606] vgaarb: loaded
[    0.413606] EDAC MC: Ver: 3.0.0
[    0.413606] Registered efivars operations
[    0.416031] PCI: Using ACPI for IRQ routing
[    0.417229] PCI: pci_cache_line_size set to 64 bytes
[    0.417363] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.417364] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.417365] e820: reserve RAM buffer [mem 0xb80ea000-0xbbffffff]
[    0.417365] e820: reserve RAM buffer [mem 0xb893e000-0xbbffffff]
[    0.417366] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff]
[    0.417367] e820: reserve RAM buffer [mem 0xc9634000-0xcbffffff]
[    0.417368] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.417369] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
[    0.417441] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.417441] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.418050] clocksource: Switched to clocksource hpet
[    0.422239] VFS: Disk quotas dquot_6.6.0
[    0.422254] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.422335] AppArmor: AppArmor Filesystem Enabled
[    0.422348] pnp: PnP ACPI init
[    0.422429] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.422432] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.422653] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.422655] system 00:01: [io  0xffff] has been reserved
[    0.422655] system 00:01: [io  0xffff] has been reserved
[    0.422656] system 00:01: [io  0xffff] has been reserved
[    0.422657] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.422658] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.422659] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.422660] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.422661] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.422662] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.422662] system 00:01: [io  0x3322-0x3323] has been reserved
[    0.422665] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.422681] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.422715] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.422717] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.422734] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.422791] pnp 00:05: Plug and Play ACPI device, IDs SYN1214 PNP0f13 (active)
[    0.422823] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.422825] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.423123] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.423124] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.423125] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.423126] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.423127] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.423128] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.423130] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.423130] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.423131] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.423133] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.423133] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.423134] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.423136] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.423317] pnp: PnP ACPI: found 8 devices
[    0.429146] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.429172] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.429173] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.429175] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.429177] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.429179] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.429183] pci 0000:00:1c.0:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.429189] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.429191] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.429195] pci 0000:00:1c.4:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.429200] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.429202] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.429206] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.429212] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.429213] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.429214] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.429215] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.429215] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.429216] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.429217] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.429218] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.429218] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.429219] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.429220] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.429220] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.429221] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.429222] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.429222] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.429223] pci_bus 0000:00: resource 19 [mem 0xcf200000-0xfeafffff window]
[    0.429224] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.429225] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.429225] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.429226] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.429227] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.429228] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.429228] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.429229] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.429321] NET: Registered protocol family 2
[    0.429448] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.429575] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.429676] TCP: Hash tables configured (established 131072 bind 65536)
[    0.429703] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.429739] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.429798] NET: Registered protocol family 1
[    0.429807] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.430250] PCI: CLS 64 bytes, default 64
[    0.430275] Unpacking initramfs...
[    0.957682] Freeing initrd memory: 49780K
[    0.957723] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.957725] software IO TLB [mem 0xc1a6e000-0xc5a6e000] (64MB) mapped at [ffffa0a181a6e000-ffffa0a185a6dfff]
[    0.958067] audit: initializing netlink subsys (disabled)
[    0.958119] audit: type=2000 audit(1520416103.956:1): state=initialized audit_enabled=0 res=1
[    0.958338] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.958403] zbud: loaded
[    1.175213] Key type asymmetric registered
[    1.175213] Asymmetric key parser 'x509' registered
[    1.175224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.175253] io scheduler noop registered
[    1.175254] io scheduler deadline registered
[    1.175263] io scheduler cfq registered (default)
[    1.175264] io scheduler mq-deadline registered
[    1.175768] efifb: probing for efifb
[    1.175780] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
[    1.175781] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.175781] efifb: scrolling: redraw
[    1.175782] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.178526] Console: switching to colour frame buffer device 240x67
[    1.181166] fb0: EFI VGA frame buffer device
[    1.181172] intel_idle: disabled
[    1.181405] Monitor-Mwait will be used to enter C-1 state
[    1.181413] Monitor-Mwait will be used to enter C-2 state
[    1.186534] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.186870] Linux agpgart interface v0.103
[    1.186918] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.186918] AMD IOMMUv2 functionality not available on this system
[    1.187459] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[    1.192047] i8042: Detected active multiplexing controller, rev 1.1
[    1.194461] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.194481] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.194494] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.194507] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.194519] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.194588] mousedev: PS/2 mouse device common for all mice
[    1.194618] rtc_cmos 00:02: RTC can wake from S4
[    1.194726] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.194749] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.194756] intel_pstate: Intel P-state driver initializing
[    1.195182] ledtrig-cpu: registered to indicate activity on CPUs
[    1.195926] NET: Registered protocol family 10
[    1.196542] Segment Routing with IPv6
[    1.196575] mip6: Mobile IPv6
[    1.196579] NET: Registered protocol family 17
[    1.196583] mpls_gso: MPLS GSO support
[    1.198023] microcode: sig=0x306c3, pf=0x20, revision=0x22
[    1.198032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.198349] microcode: Microcode Update Driver: v2.2.
[    1.198380] sched_clock: Marking stable (1198327277, 0)->(1204473058, -6145781)
[    1.198986] registered taskstats version 1
[    1.199034] zswap: loaded using pool lzo/zbud
[    1.199254] AppArmor: AppArmor sha1 policy hashing enabled
[    1.199260] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.200553] rtc_cmos 00:02: setting system clock to 2018-03-07 09:48:25 UTC (1520416105)
[    1.204539] Freeing unused kernel memory: 1460K
[    1.204541] Write protecting the kernel read-only data: 16384k
[    1.205859] Freeing unused kernel memory: 2012K
[    1.209337] Freeing unused kernel memory: 1036K
[    1.213306] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.213307] x86/mm: Checking user space page tables
[    1.217038] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.283530] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    1.283557] ACPI: Power Button [PWRB]
[    1.283608] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    1.283627] ACPI: Sleep Button [SLPB]
[    1.283727] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    1.283767] ACPI: Lid Switch [LID0]
[    1.283798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    1.283812] ACPI: Power Button [PWRF]
[    1.284647] hidraw: raw HID events driver (C) Jiri Kosina
[    1.286943] sdhci: Secure Digital Host Controller Interface driver
[    1.286944] sdhci: Copyright(c) Pierre Ossman
[    1.290584] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.290634] thermal LNXTHERM:00: registered as thermal_zone0
[    1.290635] ACPI: Thermal Zone [TZ0] (43 C)
[    1.293158] ACPI: bus type USB registered
[    1.293177] usbcore: registered new interface driver usbfs
[    1.293185] usbcore: registered new interface driver hub
[    1.293212] usbcore: registered new device driver usb
[    1.294145] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.294168] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.295003] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    1.295084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.295159] SCSI subsystem initialized
[    1.295351] nvme nvme0: pci function 0000:02:00.0
[    1.295395] ehci-pci: EHCI PCI platform driver
[    1.295744] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.295750] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[    1.295764] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.295769] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.295779] ehci-pci 0000:00:1a.0: debug port 2
[    1.299091] AVX2 version of gcm_enc/dec engaged.
[    1.299092] AES CTR mode by8 optimization enabled
[    1.299673] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.299695] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7b1c000
[    1.299930] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.301793] libata version 3.00 loaded.
[    1.304972] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.307899] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.308471] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.308956] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffb11bc1925000, 80:fa:5b:20:e8:a2, XID 1c800800 IRQ 28
[    1.308958] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.309039] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.309552] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.310087] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.310686] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.311376] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.311964] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.312008] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.312089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.312091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.312093] usb usb1: Product: EHCI Host Controller
[    1.312095] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.312096] usb usb1: SerialNumber: 0000:00:1a.0
[    1.312212] hub 1-0:1.0: USB hub found
[    1.312223] hub 1-0:1.0: 2 ports detected
[    1.312464] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.312468] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.312477] ehci-pci 0000:00:1d.0: debug port 2
[    1.312896] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
[    1.313094] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.313534] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.313990] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.314423] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.314878] call_modprobe: crypto-pcbc   2 
[    1.315526] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.315779] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    1.316368] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    1.316392] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.316406] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7b1b000
[    1.332079] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.332149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.332150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.332151] usb usb2: Product: EHCI Host Controller
[    1.332153] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.332154] usb usb2: SerialNumber: 0000:00:1d.0
[    1.332387] hub 2-0:1.0: USB hub found
[    1.332394] hub 2-0:1.0: 2 ports detected
[    1.332746] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.332754] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.333837] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.333842] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.333946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.333947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.333948] usb usb3: Product: xHCI Host Controller
[    1.333949] usb usb3: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.333950] usb usb3: SerialNumber: 0000:00:14.0
[    1.334105] hub 3-0:1.0: USB hub found
[    1.334121] hub 3-0:1.0: 14 ports detected
[    1.336186] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.336190] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.336226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.336227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.336228] usb usb4: Product: xHCI Host Controller
[    1.336229] usb usb4: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.336230] usb usb4: SerialNumber: 0000:00:14.0
[    1.336434] hub 4-0:1.0: USB hub found
[    1.336444] hub 4-0:1.0: 6 ports detected
[    1.337263] [drm] Memory usable by graphics device = 2048M
[    1.337265] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    1.337266] fb: switching to inteldrmfb from EFI VGA
[    1.337283] Console: switching to colour dummy device 80x25
[    1.337368] [drm] Replacing VGA console driver
[    1.343375] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.343376] [drm] Driver supports precise vblank timestamp query.
[    1.345453] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.362599] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.362773] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.362810] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.363022] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:51/LNXVIDEO:00/input/input11
[    1.363095] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.363276] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[    1.363328] ahci 0000:00:1f.2: version 3.0
[    1.363551] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.363579] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x25 impl SATA mode
[    1.363581] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.384963] scsi host0: ahci
[    1.385218] scsi host1: ahci
[    1.385462] scsi host2: ahci
[    1.385652] scsi host3: ahci
[    1.385818] scsi host4: ahci
[    1.385944] scsi host5: ahci
[    1.385996] ata1: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a100 irq 31
[    1.385997] ata2: DUMMY
[    1.385999] ata3: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a200 irq 31
[    1.386000] ata4: DUMMY
[    1.386001] ata5: DUMMY
[    1.386003] ata6: SATA max UDMA/133 abar m2048@0xf7b1a000 port 0xf7b1a380 irq 31
[    1.414249] fbcon: inteldrmfb (fb0) is primary device
[    1.536796]  nvme0n1: p1 p2 p3 p4
[    1.648022] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.668062] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.676063] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.698896] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.700228] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[    1.700230] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.701600] ata1.00: configured for UDMA/133
[    1.804361] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.804363] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.804666] hub 1-1:1.0: USB hub found
[    1.804733] hub 1-1:1.0: 6 ports detected
[    1.824357] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.824359] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.824666] hub 2-1:1.0: USB hub found
[    1.824832] hub 2-1:1.0: 8 ports detected
[    1.830800] usb 3-2: New USB device found, idVendor=24ae, idProduct=4006
[    1.830803] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.830804] usb 3-2: Product: Rapoo Gaming Keyboard
[    1.830806] usb 3-2: Manufacturer: Rapoo
[    1.888734] usbcore: registered new interface driver usbhid
[    1.888735] usbhid: USB HID core driver
[    1.889453] input: Rapoo Rapoo Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:24AE:4006.0001/input/input13
[    1.948217] hid-generic 0003:24AE:4006.0001: input,hidraw0: USB HID v1.10 Keyboard [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:14.0-2/input0
[    1.948539] input: Rapoo Rapoo Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:24AE:4006.0002/input/input14
[    1.956012] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    1.994987] tsc: Refined TSC clocksource calibration: 2593.993 MHz
[    1.994994] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256411d258c, max_idle_ns: 440795337342 ns
[    2.008355] hid-generic 0003:24AE:4006.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:14.0-2/input1
[    2.008566] hid-generic 0003:24AE:4006.0003: hiddev1,hidraw2: USB HID v1.10 Device [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:14.0-2/input2
[    2.105251] usb 3-4: New USB device found, idVendor=0bda, idProduct=b002
[    2.105254] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.105255] usb 3-4: Product: Bluetooth Radio 
[    2.105257] usb 3-4: Manufacturer: Realtek 
[    2.105258] usb 3-4: SerialNumber: 00e04c000001
[    2.232017] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[    2.347736] Console: switching to colour frame buffer device 240x67
[    2.369174] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.381167] usb 3-6: New USB device found, idVendor=046d, idProduct=c083
[    2.381170] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.381171] usb 3-6: Product: G403 Prodigy Gaming Mouse
[    2.381172] usb 3-6: Manufacturer: Logitech
[    2.381174] usb 3-6: SerialNumber: 048936603538
[    2.382432] input: Logitech G403 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C083.0004/input/input15
[    2.382506] hid-generic 0003:046D:C083.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G403 Prodigy Gaming Mouse] on usb-0000:00:14.0-6/input0
[    2.383505] input: Logitech G403 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C083.0005/input/input16
[    2.440090] hid-generic 0003:046D:C083.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [Logitech G403 Prodigy Gaming Mouse] on usb-0000:00:14.0-6/input1
[    2.464198] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[    2.489471] psmouse serio2: synaptics: queried max coordinates: x [..5706], y [..4800]
[    2.567999] usb 3-10: new high-speed USB device number 5 using xhci_hcd
[    2.636430] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787
[    2.677476] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[    2.765148] usb 3-10: New USB device found, idVendor=5986, idProduct=066d
[    2.765151] usb 3-10: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.765153] usb 3-10: Product: BisonCam, NB Pro
[    2.765154] usb 3-10: Manufacturer: Generic
[    2.765155] usb 3-10: SerialNumber: 200901010001
[    2.779786] ata3: SATA link down (SStatus 0 SControl 300)
[    3.004139] clocksource: Switched to clocksource tsc
[    3.095494] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.096843] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.096847] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.096849] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.097119] ata6.00: ATA-9: TS256GMTS800, N1126I, max UDMA/133
[    3.097123] ata6.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    3.098054] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.098058] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.098060] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.098551] ata6.00: configured for UDMA/133
[    3.098784] scsi 5:0:0:0: Direct-Access     ATA      TS256GMTS800     6I   PQ: 0 ANSI: 5
[    3.103964] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.103970] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.103992] sd 0:0:0:0: [sda] Write Protect is off
[    3.103996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.104028] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.104095] sd 5:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    3.104115] sd 5:0:0:0: [sdb] Write Protect is off
[    3.104120] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.104149] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.105658]  sdb: sdb1 sdb2 sdb3
[    3.105994] sd 5:0:0:0: [sdb] Attached SCSI disk
[    3.132334]  sda: sda1 sda2 sda3 sda4
[    3.132839] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.623979] raid6: sse2x1   gen() 10944 MB/s
[    3.671950] raid6: sse2x1   xor()  8078 MB/s
[    3.719949] raid6: sse2x2   gen() 14084 MB/s
[    3.767962] raid6: sse2x2   xor()  9440 MB/s
[    3.815967] raid6: sse2x4   gen() 16207 MB/s
[    3.863980] raid6: sse2x4   xor() 11367 MB/s
[    3.911951] raid6: avx2x1   gen() 21524 MB/s
[    3.959950] raid6: avx2x1   xor() 15820 MB/s
[    4.007951] raid6: avx2x2   gen() 25102 MB/s
[    4.055949] raid6: avx2x2   xor() 17323 MB/s
[    4.103968] raid6: avx2x4   gen() 29262 MB/s
[    4.151988] raid6: avx2x4   xor() 20781 MB/s
[    4.151989] raid6: using algorithm avx2x4 gen() 29262 MB/s
[    4.151989] raid6: .... xor() 20781 MB/s, rmw enabled
[    4.151990] raid6: using avx2x2 recovery algorithm
[    4.152205] xor: automatically using best checksumming function   avx       
[    4.152330] async_tx: api initialized (async)
[    4.481946] Btrfs loaded, crc32c=crc32c-intel
[    9.606700] random: crng init done
[   36.075692] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   36.171751] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[   36.184984] ip_tables: (C) 2000-2006 Netfilter Core Team
[   36.185338] call_modprobe: fs-efivarfs   2 
[   36.198204] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   36.198337] systemd[1]: Detected architecture x86-64.
[   36.198485] systemd[1]: Set hostname to <mxdlzg-PC>.
[   36.260486] systemd[1]: Created slice System Slice.
[   36.260623] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   36.260667] systemd[1]: Listening on udev Control Socket.
[   36.260693] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   36.260718] systemd[1]: Listening on LVM2 metadata daemon socket.
[   36.260725] systemd[1]: Reached target User and Group Name Lookups.
[   36.260763] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   36.337430] call_modprobe: parport_lowlevel   2 
[   36.347337] call_modprobe: fs-binfmt_misc   2 
[   36.350189] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[   36.392640] systemd-journald[689]: Received request to flush runtime journal from PID 1
[   36.400259] lp: driver loaded but no devices found
[   36.423250] call_modprobe: parport_lowlevel   2 
[   36.423855] ppdev: user-space parallel port driver
[   36.425479] bbswitch: loading out-of-tree module taints kernel.
[   36.425595] bbswitch: version 0.8
[   36.425598] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   36.425601] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   36.425610] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[   36.425678] bbswitch: detected an Optimus _DSM function
[   36.425685] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   36.425725] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   36.428335] fuse init (API version 7.26)
[   36.433430] systemd-journald[689]: File /var/log/journal/276296959f544f1e8dadea7ec5916ab0/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   36.545530] ACPI: AC Adapter [AC] (on-line)
[   36.546934] EDAC ie31200: No ECC support
[   36.547472] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[   36.547478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.547481] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[   36.547483] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
[   36.547485] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[   36.547487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.547488] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[   36.547490] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[   36.547492] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
[   36.547493] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[   36.547495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.547496] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[   36.547497] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[   36.547499] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
[   36.547501] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[   36.547503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.547503] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   36.547960] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.548337] ACPI: Battery Slot [BAT0] (battery present)
[   36.669007] input: PC Speaker as /devices/platform/pcspkr/input/input19
[   36.669550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.669581] sd 5:0:0:0: Attached scsi generic sg1 type 0
[   36.673770] EFI Variables Facility v0.08 2004-May-17
[   36.674091] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   36.674093] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   36.674094] RAPL PMU: hw unit of domain package 2^-14 Joules
[   36.674094] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   36.674095] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   36.677210] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[   36.677370] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   36.677372] call_modprobe: i915   2 
[   36.677471] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   36.681010] pstore: using zlib compression
[   36.682213] pstore: Registered efi as persistent store backend
[   36.686995] call_modprobe: hdaudio:v10EC0892r00100302a01
                  2 
[   36.696050] call_modprobe: hdaudio:v80862807r00100000a01
                  2 
[   36.698211] snd_hda_codec_realtek hdaudioC1D0: ignore pin 0x1b with mismatching assoc# 0x3 vs 0x2
[   36.698254] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
[   36.698255] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   36.698257] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   36.698258] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   36.698259] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[   36.698260] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   36.698262] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   36.698264] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   36.705877] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[   36.706034] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[   36.706091] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[   36.706687] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[   36.706743] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[   36.706821] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[   36.706876] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[   36.706927] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[   36.709585] rtl8723be 0000:04:00.0: enabling device (0000 -> 0003)
[   36.735500] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[   36.736625] rtl8723be 0000:04:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin
[   36.736988] call_modprobe: crypto-arc4   2 
[   36.756489] iTCO_vendor_support: vendor-support=0
[   36.756658] call_modprobe: crypto-arc4-all   2 
[   36.757023] intel_rapl: Found RAPL domain package
[   36.757024] intel_rapl: Found RAPL domain core
[   36.757025] intel_rapl: Found RAPL domain uncore
[   36.757026] intel_rapl: Found RAPL domain dram
[   36.757028] intel_rapl: RAPL package 0 domain package locked by BIOS
[   36.757031] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   36.757197] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   36.757243] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   36.757391] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.757492] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   36.757993] rtlwifi: rtlwifi: wireless switch is on
[   36.776359] wl: module license 'MIXED/Proprietary' taints kernel.
[   36.776360] Disabling lock debugging due to kernel taint
[   36.828226] rtl8723be 0000:04:00.0 wlp4s0: renamed from wlan0
[   37.022181] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[   37.026293] call_modprobe: fs-vfat   2 
[   37.030037] call_modprobe: nls_cp437   2 
[   37.031546] call_modprobe: nls_ascii   2 
[   37.031929] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[   37.099993] call_modprobe: netdev---all   2 
[   37.100509] call_modprobe: --all   2 
[   37.100957] call_modprobe: netdev---all   2 
[   37.101400] call_modprobe: --all   2 
[   37.298273] bbswitch: disabling discrete graphics
[   37.338940] call_modprobe: net-pf-15   2 
[   37.341919] NET: Registered protocol family 15
[   37.342072] call_modprobe: crypto-hmac(md5)   2 
[   37.342564] call_modprobe: crypto-hmac(md5)-all   2 
[   37.343150] call_modprobe: crypto-hmac(sha1)   2 
[   37.343631] call_modprobe: crypto-hmac(sha1)-all   2 
[   37.344422] call_modprobe: crypto-hmac(sha256)   2 
[   37.344936] call_modprobe: crypto-hmac(sha256)-all   2 
[   37.345712] call_modprobe: crypto-hmac(sha384)   2 
[   37.346170] call_modprobe: crypto-hmac(sha384)-all   2 
[   37.346735] call_modprobe: crypto-sha384   2 
[   37.349164] call_modprobe: crypto-sha384-all   2 
[   37.349858] call_modprobe: crypto-hmac(sha512)   2 
[   37.350562] call_modprobe: crypto-hmac(sha512)-all   2 
[   37.351258] call_modprobe: crypto-hmac(rmd160)   2 
[   37.351744] call_modprobe: crypto-hmac(rmd160)-all   2 
[   37.352663] call_modprobe: crypto-rmd160   2 
[   37.354530] call_modprobe: crypto-rmd160-all   2 
[   37.355201] call_modprobe: crypto-xcbc(aes)   2 
[   37.355704] call_modprobe: crypto-xcbc(aes)-all   2 
[   37.356411] call_modprobe: crypto-xcbc   2 
[   37.357998] call_modprobe: crypto-cmac(aes)   2 
[   37.358681] call_modprobe: crypto-cmac(aes)-all   2 
[   37.359222] call_modprobe: crypto-cmac   2 
[   37.361730] call_modprobe: crypto-cbc(des)   2 
[   37.362268] call_modprobe: crypto-cbc(des)-all   2 
[   37.362790] call_modprobe: crypto-cbc   2 
[   37.364478] call_modprobe: crypto-des   2 
[   37.366703] call_modprobe: crypto-des-all   2 
[   37.367305] call_modprobe: crypto-cbc(des3_ede)   2 
[   37.367773] call_modprobe: crypto-cbc(des3_ede)-all   2 
[   37.368666] call_modprobe: crypto-cbc(cast5)   2 
[   37.369126] call_modprobe: crypto-cbc(cast5)-all   2 
[   37.369711] call_modprobe: crypto-cast5   2 
[   37.390346] call_modprobe: crypto-cryptd(__driver-ecb-cast5-avx)   2 
[   37.390938] call_modprobe: crypto-cryptd(__driver-ecb-cast5-avx)-all   2 
[   37.391696] call_modprobe: crypto-cryptd(__driver-cbc-cast5-avx)   2 
[   37.392324] call_modprobe: crypto-cryptd(__driver-cbc-cast5-avx)-all   2 
[   37.392942] call_modprobe: crypto-cryptd(__driver-ctr-cast5-avx)   2 
[   37.393497] call_modprobe: crypto-cryptd(__driver-ctr-cast5-avx)-all   2 
[   37.394313] call_modprobe: crypto-cast5-all   2 
[   37.394925] call_modprobe: crypto-cbc(blowfish)   2 
[   37.395442] call_modprobe: crypto-cbc(blowfish)-all   2 
[   37.395949] call_modprobe: crypto-blowfish   2 
[   37.404293] call_modprobe: crypto-blowfish-all   2 
[   37.405622] call_modprobe: crypto-cbc(serpent)   2 
[   37.406171] call_modprobe: crypto-cbc(serpent)-all   2 
[   37.406735] call_modprobe: crypto-serpent   2 
[   37.412563] call_modprobe: crypto-cryptd(__driver-ecb-serpent-sse2)   2 
[   37.413151] call_modprobe: crypto-cryptd(__driver-ecb-serpent-sse2)-all   2 
[   37.413770] call_modprobe: crypto-cryptd(__driver-cbc-serpent-sse2)   2 
[   37.414231] call_modprobe: crypto-cryptd(__driver-cbc-serpent-sse2)-all   2 
[   37.414828] call_modprobe: crypto-cryptd(__driver-ctr-serpent-sse2)   2 
[   37.415278] call_modprobe: crypto-cryptd(__driver-ctr-serpent-sse2)-all   2 
[   37.415921] call_modprobe: crypto-cryptd(__driver-lrw-serpent-sse2)   2 
[   37.416485] call_modprobe: crypto-cryptd(__driver-lrw-serpent-sse2)-all   2 
[   37.417808] call_modprobe: crypto-cryptd(__driver-xts-serpent-sse2)   2 
[   37.418264] call_modprobe: crypto-cryptd(__driver-xts-serpent-sse2)-all   2 
[   37.419869] call_modprobe: crypto-cryptd(__driver-ecb-serpent-avx)   2 
[   37.420356] call_modprobe: crypto-cryptd(__driver-ecb-serpent-avx)-all   2 
[   37.420961] call_modprobe: crypto-cryptd(__driver-cbc-serpent-avx)   2 
[   37.421425] call_modprobe: crypto-cryptd(__driver-cbc-serpent-avx)-all   2 
[   37.422009] call_modprobe: crypto-cryptd(__driver-ctr-serpent-avx)   2 
[   37.422456] call_modprobe: crypto-cryptd(__driver-ctr-serpent-avx)-all   2 
[   37.423054] call_modprobe: crypto-cryptd(__driver-lrw-serpent-avx)   2 
[   37.423514] call_modprobe: crypto-cryptd(__driver-lrw-serpent-avx)-all   2 
[   37.424880] call_modprobe: crypto-cryptd(__driver-xts-serpent-avx)   2 
[   37.425354] call_modprobe: crypto-cryptd(__driver-xts-serpent-avx)-all   2 
[   37.427270] call_modprobe: crypto-cryptd(__driver-ecb-serpent-avx2)   2 
[   37.427749] call_modprobe: crypto-cryptd(__driver-ecb-serpent-avx2)-all   2 
[   37.428588] call_modprobe: crypto-cryptd(__driver-cbc-serpent-avx2)   2 
[   37.429120] call_modprobe: crypto-cryptd(__driver-cbc-serpent-avx2)-all   2 
[   37.429743] call_modprobe: crypto-cryptd(__driver-ctr-serpent-avx2)   2 
[   37.430229] call_modprobe: crypto-cryptd(__driver-ctr-serpent-avx2)-all   2 
[   37.430957] call_modprobe: crypto-cryptd(__driver-lrw-serpent-avx2)   2 
[   37.431589] call_modprobe: crypto-cryptd(__driver-lrw-serpent-avx2)-all   2 
[   37.433020] call_modprobe: crypto-cryptd(__driver-xts-serpent-avx2)   2 
[   37.433493] call_modprobe: crypto-cryptd(__driver-xts-serpent-avx2)-all   2 
[   37.434219] call_modprobe: crypto-serpent-all   2 
[   37.434821] call_modprobe: crypto-cbc(camellia)   2 
[   37.435279] call_modprobe: crypto-cbc(camellia)-all   2 
[   37.435769] call_modprobe: crypto-camellia   2 
[   37.439448] call_modprobe: crypto-cryptd(__driver-ecb-camellia-aesni)   2 
[   37.439937] call_modprobe: crypto-cryptd(__driver-ecb-camellia-aesni)-all   2 
[   37.440620] call_modprobe: crypto-cryptd(__driver-cbc-camellia-aesni)   2 
[   37.441077] call_modprobe: crypto-cryptd(__driver-cbc-camellia-aesni)-all   2 
[   37.441684] call_modprobe: crypto-cryptd(__driver-ctr-camellia-aesni)   2 
[   37.442146] call_modprobe: crypto-cryptd(__driver-ctr-camellia-aesni)-all   2 
[   37.442772] call_modprobe: crypto-cryptd(__driver-lrw-camellia-aesni)   2 
[   37.443222] call_modprobe: crypto-cryptd(__driver-lrw-camellia-aesni)-all   2 
[   37.444446] call_modprobe: crypto-cryptd(__driver-xts-camellia-aesni)   2 
[   37.444903] call_modprobe: crypto-cryptd(__driver-xts-camellia-aesni)-all   2 
[   37.447646] call_modprobe: crypto-cryptd(__driver-ecb-camellia-aesni-avx2)   2 
[   37.448202] call_modprobe: crypto-cryptd(__driver-ecb-camellia-aesni-avx2)-all   2 
[   37.448783] call_modprobe: crypto-cryptd(__driver-cbc-camellia-aesni-avx2)   2 
[   37.449224] call_modprobe: crypto-cryptd(__driver-cbc-camellia-aesni-avx2)-all   2 
[   37.449975] call_modprobe: crypto-cryptd(__driver-ctr-camellia-aesni-avx2)   2 
[   37.450441] call_modprobe: crypto-cryptd(__driver-ctr-camellia-aesni-avx2)-all   2 
[   37.451066] call_modprobe: crypto-cryptd(__driver-lrw-camellia-aesni-avx2)   2 
[   37.451514] call_modprobe: crypto-cryptd(__driver-lrw-camellia-aesni-avx2)-all   2 
[   37.452745] call_modprobe: crypto-cryptd(__driver-xts-camellia-aesni-avx2)   2 
[   37.453240] call_modprobe: crypto-cryptd(__driver-xts-camellia-aesni-avx2)-all   2 
[   37.455518] call_modprobe: crypto-camellia-all   2 
[   37.456156] call_modprobe: crypto-cbc(twofish)   2 
[   37.456636] call_modprobe: crypto-cbc(twofish)-all   2 
[   37.457163] call_modprobe: crypto-twofish   2 
[   37.465279] call_modprobe: crypto-cryptd(__driver-ecb-twofish-avx)   2 
[   37.465777] call_modprobe: crypto-cryptd(__driver-ecb-twofish-avx)-all   2 
[   37.466418] call_modprobe: crypto-cryptd(__driver-cbc-twofish-avx)   2 
[   37.466859] call_modprobe: crypto-cryptd(__driver-cbc-twofish-avx)-all   2 
[   37.467450] call_modprobe: crypto-cryptd(__driver-ctr-twofish-avx)   2 
[   37.467886] call_modprobe: crypto-cryptd(__driver-ctr-twofish-avx)-all   2 
[   37.468637] call_modprobe: crypto-cryptd(__driver-lrw-twofish-avx)   2 
[   37.469122] call_modprobe: crypto-cryptd(__driver-lrw-twofish-avx)-all   2 
[   37.470441] call_modprobe: crypto-cryptd(__driver-xts-twofish-avx)   2 
[   37.470917] call_modprobe: crypto-cryptd(__driver-xts-twofish-avx)-all   2 
[   37.473242] call_modprobe: crypto-twofish-all   2 
[   37.473836] call_modprobe: crypto-rfc3686(ctr(aes))   2 
[   37.474289] call_modprobe: crypto-rfc3686(ctr(aes))-all   2 
[   37.474789] call_modprobe: crypto-rfc3686   2 
[   37.476692] call_modprobe: crypto-deflate   2 
[   37.479659] call_modprobe: crypto-deflate-all   2 
[   37.480201] call_modprobe: crypto-lzs   2 
[   37.480719] call_modprobe: crypto-lzs-all   2 
[   37.481189] call_modprobe: crypto-lzjh   2 
[   37.481718] call_modprobe: crypto-lzjh-all   2 
[   37.482240] call_modprobe: crypto-lzs   2 
[   37.482675] call_modprobe: crypto-lzs-all   2 
[   37.483240] call_modprobe: crypto-lzjh   2 
[   37.483702] call_modprobe: crypto-lzjh-all   2 
[   37.484307] call_modprobe: crypto-lzs   2 
[   37.484763] call_modprobe: crypto-lzs-all   2 
[   37.485202] call_modprobe: crypto-lzjh   2 
[   37.485641] call_modprobe: crypto-lzjh-all   2 
[   37.503769] call_modprobe: crypto-lz4   2 
[   37.511046] call_modprobe: crypto-lz4-all   2 
[   37.511789] call_modprobe: zpool-z3fold   2 
[   37.512316] zswap: zpool z3fold not available
[   37.558305] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[   37.558426] request_firmware: rtl_nic/rtl8411-2.fw
[   37.561592] r8169 0000:03:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[   37.582164] r8169 0000:03:00.1 enp3s0f1: link down
[   37.582166] r8169 0000:03:00.1 enp3s0f1: link down
[   37.582220] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[   37.586074] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   37.608658] call_modprobe: char-major-10-237   2 
[   37.613773] loop: module loaded
[   37.937086] media: Linux media interface: v0.10
[   37.939011] call_modprobe: crypto-stdrng   2 
[   37.943862] Linux video capture interface: v2.00
[   37.944607] call_modprobe: crypto-stdrng-all   2 
[   37.954380] Bluetooth: Core ver 2.22
[   37.954395] NET: Registered protocol family 31
[   37.954396] Bluetooth: HCI device and connection manager initialized
[   37.954399] Bluetooth: HCI socket layer initialized
[   37.954401] Bluetooth: L2CAP socket layer initialized
[   37.954409] Bluetooth: SCO socket layer initialized
[   38.073150] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:066d)
[   38.075482] uvcvideo 3-10:1.0: Entity type for entity Extension 4 was not initialized!
[   38.075484] uvcvideo 3-10:1.0: Entity type for entity Processing 2 was not initialized!
[   38.075485] uvcvideo 3-10:1.0: Entity type for entity Camera 1 was not initialized!
[   38.075547] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input28
[   38.075607] usbcore: registered new interface driver uvcvideo
[   38.075608] USB Video Class driver (1.1.1)
[   38.164941] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   38.474989] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   38.516735] Adding 8388604k swap on /dev/loop0.  Priority:-2 extents:1 across:8388604k DscFS
[   39.084023] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   39.084026] Bluetooth: reset realtek bluetooth device: failed with -16
[   39.084278] usbcore: registered new interface driver btusb
[   39.086082] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   39.086084] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[   39.086085] request_firmware: rtl_bt/rtl8723b_config.bin
[   39.086235] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)
[   39.086237] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[   39.086239] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   39.086239] request_firmware: rtl_bt/rtl8723b_fw.bin
[   39.086679] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[   39.088051] Bluetooth: hci0: rom_version status=0 version=1
[   39.088057] Bluetooth: cfg_sz 0, total size 22496
[   39.112612] call_modprobe: iptable_filter   2 
[   39.123883] call_modprobe: bt-proto-4   2 
[   39.125361] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   39.125362] Bluetooth: BNEP filters: protocol multicast
[   39.125365] Bluetooth: BNEP socket layer initialized
[   39.191997] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   39.192127] call_modprobe: ip6table_filter   2 
[   39.262140] Ebtables v2.0 registered
[   39.262272] call_modprobe: ebtable_filter   2 
[   39.828082] r8169 0000:03:00.1 enp3s0f1: link up
[   39.828087] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready
[   39.961141] /dev/vmmon[1891]: Module vmmon: registered with major=10 minor=165
[   39.961143] /dev/vmmon[1891]: Using tsc_khz as TSC frequency: 2593993
[   39.961144] /dev/vmmon[1891]: Module vmmon: initialized
[   39.976084] Guest personality initialized and is inactive
[   39.976119] VMCI host device registered (name=vmci, major=10, minor=57)
[   39.976120] Initialized host personality
[   39.987378] Initializing XFRM netlink socket
[   39.999895] NET: Registered protocol family 40
[   40.215199] call_modprobe: netdev-eth0   2 
[   40.215829] call_modprobe: eth0   2 
[   40.216415] call_modprobe: netdev-eth1   2 
[   40.216932] call_modprobe: eth1   2 
[   40.217467] call_modprobe: netdev-eth2   2 
[   40.217953] call_modprobe: eth2   2 
[   40.218437] call_modprobe: netdev-eth3   2 
[   40.218917] call_modprobe: eth3   2 
[   40.219501] call_modprobe: netdev-eth4   2 
[   40.220018] call_modprobe: eth4   2 
[   40.220534] call_modprobe: netdev-eth5   2 
[   40.221014] call_modprobe: eth5   2 
[   40.221473] call_modprobe: netdev-eth6   2 
[   40.221927] call_modprobe: eth6   2 
[   40.222428] call_modprobe: netdev-eth7   2 
[   40.222949] call_modprobe: eth7   2 
[   40.233193] /dev/vmnet: open called by PID 2292 (vmnet-bridge)
[   40.233198] /dev/vmnet: hub 0 does not exist, allocating memory.
[   40.233206] /dev/vmnet: port on hub 0 successfully opened
[   40.233212] bridge-enp3s0f1: up
[   40.233215] bridge-enp3s0f1: attached
[   40.426893] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   40.427535] Bridge firewalling registered
[   40.432397] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   40.439931] call_modprobe: ipt_addrtype   2 
[   40.441163] call_modprobe: iptable_nat   2 
[   40.442386] call_modprobe: nf_conntrack-2   2 
[   40.570388] Netfilter messages via NETLINK v0.30.
[   40.571345] ctnetlink v0.93: registering with nfnetlink.
[   40.575325] call_modprobe: ipt_MASQUERADE   2 
[   40.815705] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   41.246297] /dev/vmnet: open called by PID 2447 (vmnet-netifup)
[   41.246302] /dev/vmnet: hub 1 does not exist, allocating memory.
[   41.246309] /dev/vmnet: port on hub 1 successfully opened
[   41.259750] /dev/vmnet: open called by PID 2451 (vmnet-dhcpd)
[   41.259762] /dev/vmnet: port on hub 1 successfully opened
[   41.267314] /dev/vmnet: open called by PID 2468 (vmnet-natd)
[   41.267319] /dev/vmnet: hub 8 does not exist, allocating memory.
[   41.267327] /dev/vmnet: port on hub 8 successfully opened
[   41.268262] userif-3: sent link down event.
[   41.268264] userif-3: sent link up event.
[   41.269329] /dev/vmnet: open called by PID 2469 (vmnet-netifup)
[   41.269336] /dev/vmnet: port on hub 8 successfully opened
[   41.281583] /dev/vmnet: open called by PID 2473 (vmnet-dhcpd)
[   41.281596] /dev/vmnet: port on hub 8 successfully opened
[   42.108074] call_modprobe: netdev-eth0   2 
[   42.108748] call_modprobe: eth0   2 
[   42.109439] call_modprobe: netdev-eth1   2 
[   42.110057] call_modprobe: eth1   2 
[   42.111481] call_modprobe: netdev-eth2   2 
[   42.112078] call_modprobe: eth2   2 
[   42.112628] call_modprobe: netdev-eth3   2 
[   42.113243] call_modprobe: eth3   2 
[   42.113848] call_modprobe: netdev-eth4   2 
[   42.114366] call_modprobe: eth4   2 
[   42.114860] call_modprobe: netdev-eth5   2 
[   42.115318] call_modprobe: eth5   2 
[   42.115918] call_modprobe: netdev-eth6   2 
[   42.116462] call_modprobe: eth6   2 
[   42.117060] call_modprobe: netdev-eth7   2 
[   42.117621] call_modprobe: eth7   2 
[   42.923258] call_modprobe: netdev-eth0   2 
[   42.923987] call_modprobe: eth0   2 
[   42.925033] call_modprobe: netdev-eth1   2 
[   42.925622] call_modprobe: eth1   2 
[   42.926166] call_modprobe: netdev-eth2   2 
[   42.926665] call_modprobe: eth2   2 
[   42.927207] call_modprobe: netdev-eth3   2 
[   42.927791] call_modprobe: eth3   2 
[   42.928368] call_modprobe: netdev-eth4   2 
[   42.928925] call_modprobe: eth4   2 
[   42.929559] call_modprobe: netdev-eth5   2 
[   42.930112] call_modprobe: eth5   2 
[   42.930882] call_modprobe: netdev-eth6   2 
[   42.931605] call_modprobe: eth6   2 
[   42.932343] call_modprobe: netdev-eth7   2 
[   42.933421] call_modprobe: eth7   2 
[   56.792736] call_modprobe: bt-proto-3   2 
[   56.794996] Bluetooth: RFCOMM TTY layer initialized
[   56.795002] Bluetooth: RFCOMM socket layer initialized
[   56.795006] Bluetooth: RFCOMM ver 1.11
[   78.875958] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445223657616877978 new 18445223657567099116 attempts 1
[  167.699857] traps: deepin-system-m[3764] general protection ip:7f5b8a327f58 sp:7fff3a48bbd0 error:0 in libdtkwidget.so.2.0.7[7f5b8a1ec000+259000]
[  229.346919] call_modprobe: snd-seq   2 
[  229.350349] call_modprobe: snd-seq-client-14   2 
[  229.729346] usb 3-4: reset full-speed USB device number 3 using xhci_hcd
[  342.502637] traps: deepin-system-m[5990] general protection ip:7f0d60b548b6 sp:7ffe9e03aff0 error:0 in libQt5Core.so.5.6.1[7f0d608b3000+4af000]
[  850.689892] EventMonitor[10353]: segfault at 58 ip 00007f2b03ab2eff sp 00007f2ad0ec8910 error 4 in libQt5Core.so.5.6.1[7f2b03819000+4af000]
[  857.816340] traps: deepin-system-m[10064] general protection ip:7fa548a11f58 sp:7ffe3a4d3510 error:0 in libdtkwidget.so.2.0.7[7fa5488d6000+259000]
[ 2700.230256] call_modprobe: netdev-eth0   2 
[ 2700.230974] call_modprobe: eth0   2 
[ 2700.231563] call_modprobe: netdev-eth1   2 
[ 2700.232118] call_modprobe: eth1   2 
[ 2700.232661] call_modprobe: netdev-eth2   2 
[ 2700.233153] call_modprobe: eth2   2 
[ 2700.233649] call_modprobe: netdev-eth3   2 
[ 2700.234171] call_modprobe: eth3   2 
[ 2700.234720] call_modprobe: netdev-eth4   2 
[ 2700.235482] call_modprobe: eth4   2 
[ 2700.236168] call_modprobe: netdev-eth5   2 
[ 2700.236865] call_modprobe: eth5   2 
[ 2700.237390] call_modprobe: netdev-eth6   2 
[ 2700.237863] call_modprobe: eth6   2 
[ 2700.238317] call_modprobe: netdev-eth7   2 
[ 2700.238768] call_modprobe: eth7   2 
[ 2700.249869] /dev/vmmon[27585]: PTSC: initialized at 2593993000 Hz using TSC, TSCs are synchronized.
[ 2700.332476] /dev/vmmon[27585]: Monitor IPI vector: ff
[ 2700.332477] /dev/vmmon[27585]: HV      IPI vector: f2
[ 2701.059739] /dev/vmnet: open called by PID 27618 (vmx-vcpu-0)
[ 2701.059751] device enp3s0f1 entered promiscuous mode
[ 2701.060209] bridge-enp3s0f1: enabled promiscuous mode
[ 2701.060211] /dev/vmnet: port on hub 0 successfully opened
[ 2701.212165] call_modprobe: netdev-eth0   2 
[ 2701.212740] call_modprobe: eth0   2 
[ 2701.213185] call_modprobe: netdev-eth1   2 
[ 2701.213627] call_modprobe: eth1   2 
[ 2701.214058] call_modprobe: netdev-eth2   2 
[ 2701.214513] call_modprobe: eth2   2 
[ 2701.214993] call_modprobe: netdev-eth3   2 
[ 2701.215525] call_modprobe: eth3   2 
[ 2701.216010] call_modprobe: netdev-eth4   2 
[ 2701.216465] call_modprobe: eth4   2 
[ 2701.216961] call_modprobe: netdev-eth5   2 
[ 2701.217419] call_modprobe: eth5   2 
[ 2701.217899] call_modprobe: netdev-eth6   2 
[ 2701.218350] call_modprobe: eth6   2 
[ 2701.218795] call_modprobe: netdev-eth7   2 
[ 2701.219262] call_modprobe: eth7   2 
[ 2713.460824] device enp3s0f1 left promiscuous mode
[ 2713.460888] bridge-enp3s0f1: disabled promiscuous mode
[ 2713.461085] /dev/vmnet: open called by PID 27619 (vmx-vcpu-1)
[ 2713.461092] device enp3s0f1 entered promiscuous mode
[ 2713.461132] bridge-enp3s0f1: enabled promiscuous mode
[ 2713.461134] /dev/vmnet: port on hub 0 successfully opened
[ 3502.778221] mce: [Hardware Error]: Machine check events logged
[ 3502.778224] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: 90000040000f0005
[ 3502.778227] mce: [Hardware Error]: TSC 849c4fe1894 
[ 3502.778230] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1520419605 SOCKET 0 APIC 0 microcode 22
[ 3728.501684] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[ 3728.652712] usb 3-1: New USB device found, idVendor=2a70, idProduct=9011
[ 3728.652720] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3728.652724] usb 3-1: Product: OnePlus
[ 3728.652728] usb 3-1: Manufacturer: Android
[ 3728.652731] usb 3-1: SerialNumber: 7e6349fe
[ 3729.180975] usb-storage 3-1:1.1: USB Mass Storage device detected
[ 3729.181191] scsi host6: usb-storage 3-1:1.1
[ 3729.181422] usbcore: registered new interface driver usb-storage
[ 3729.182931] usbcore: registered new interface driver uas
[ 3730.201730] scsi 6:0:0:0: CD-ROM            OnePlus  Device Driver    0318 PQ: 0 ANSI: 2
[ 3730.202070] scsi 6:0:0:0: Attached scsi generic sg2 type 5
[ 3730.226878] sr 6:0:0:0: [sr0] scsi-1 drive
[ 3730.226881] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3730.227129] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3730.673056] call_modprobe: fs-iso9660   2 
[ 3730.710921] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3730.710924] call_modprobe: nls_utf8   2 
[ 3730.713346] ISOFS: changing to secondary root
[ 4239.587153] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=255140 end=255141) time 369 us, min 1073, max 1079, scanline start 1057, end 1082
[ 6731.977542] deepin-system-m[30980]: segfault at 81 ip 0000000000000081 sp 00007ffce8989608 error 14 in deepin-system-monitor[56320ace3000+e0000]
[ 6734.578503] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=405079 end=405080) time 355 us, min 1073, max 1079, scanline start 1058, end 1083
[ 9948.486978] deepin-system-m[25945]: segfault at a00000021 ip 00007f21d0758f58 sp 00007fff00516210 error 4 in libdtkwidget.so.2.0.7[7f21d061d000+259000]
[10849.817462] deepin-system-m[1552]: segfault at 55cf00 ip 000000000055cf00 sp 00007ffde0ddbfd8 error 14 in deepin-system-monitor[55cf55afa000+e0000]
[13154.036794] QXcbEventReader[19635]: segfault at 7f36a0bd20a9 ip 00007f36a0bd20a9 sp 00007f36952f6d30 error 14 in gconv-modules.cache[7f36a0cac000+7000]
[13154.037412] QXcbEventReader[19887]: segfault at 7fb2785be0a9 ip 00007fb2785be0a9 sp 00007fb277336b30 error 14 in locale-archive[7fb2788cb000+34f000]
[13154.039153] dde-control-cen[21131]: segfault at 7f9a13344c80 ip 00007f9a44da5f03 sp 00007ffec4a4e7c0 error 4 in libQt5Gui.so.5.6.1[7f9a44c28000+54a000]
[13154.046303] deepin-notifica[19618]: segfault at 7f624c60fc80 ip 00007f628110df03 sp 00007fff33d3a280 error 4 in libQt5Gui.so.5.6.1[7f6280f90000+54a000]
[13154.068431] dde-dock[19640]: segfault at 7f5762c4ec80 ip 00007f5795165f03 sp 00007ffdbccee910 error 4 in libQt5Gui.so.5.6.1[7f5794fe8000+54a000]
[13154.287191] device enp3s0f1 left promiscuous mode
[13154.287267] bridge-enp3s0f1: disabled promiscuous mode
[14627.431331] call_modprobe: netdev-eth0   2 
[14627.433300] call_modprobe: eth0   2 
[14627.434879] call_modprobe: netdev-eth1   2 
[14627.435385] call_modprobe: eth1   2 
[14627.436060] call_modprobe: netdev-eth2   2 
[14627.436553] call_modprobe: eth2   2 
[14627.437076] call_modprobe: netdev-eth3   2 
[14627.437605] call_modprobe: eth3   2 
[14627.438262] call_modprobe: netdev-eth4   2 
[14627.438809] call_modprobe: eth4   2 
[14627.439807] call_modprobe: netdev-eth5   2 
[14627.440425] call_modprobe: eth5   2 
[14627.440996] call_modprobe: netdev-eth6   2 
[14627.441511] call_modprobe: eth6   2 
[14627.442401] call_modprobe: netdev-eth7   2 
[14627.442908] call_modprobe: eth7   2 
[14627.448545] /dev/vmmon[1899]: PTSC: initialized at 2593993000 Hz using TSC, TSCs are synchronized.
[14628.294666] /dev/vmnet: open called by PID 1933 (vmx-vcpu-0)
[14628.294678] device enp3s0f1 entered promiscuous mode
[14628.295364] bridge-enp3s0f1: enabled promiscuous mode
[14628.295366] /dev/vmnet: port on hub 0 successfully opened
[14628.453448] call_modprobe: netdev-eth0   2 
[14628.454062] call_modprobe: eth0   2 
[14628.454549] call_modprobe: netdev-eth1   2 
[14628.455770] call_modprobe: eth1   2 
[14628.456289] call_modprobe: netdev-eth2   2 
[14628.456817] call_modprobe: eth2   2 
[14628.457336] call_modprobe: netdev-eth3   2 
[14628.457847] call_modprobe: eth3   2 
[14628.458307] call_modprobe: netdev-eth4   2 
[14628.458782] call_modprobe: eth4   2 
[14628.459407] call_modprobe: netdev-eth5   2 
[14628.459904] call_modprobe: eth5   2 
[14628.460392] call_modprobe: netdev-eth6   2 
[14628.460861] call_modprobe: eth6   2 
[14628.461348] call_modprobe: netdev-eth7   2 
[14628.461799] call_modprobe: eth7   2 
[14639.546649] device enp3s0f1 left promiscuous mode
[14639.546909] /dev/vmnet: open called by PID 1934 (vmx-vcpu-1)
[14639.546959] bridge-enp3s0f1: disabled promiscuous mode
[14639.546971] device enp3s0f1 entered promiscuous mode
[14639.547058] bridge-enp3s0f1: enabled promiscuous mode
[14639.547059] /dev/vmnet: port on hub 0 successfully opened
[15931.346414] rtsx_pci 0000:03:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[15931.346928] r8169 0000:03:00.1: invalid short VPD tag 00 at offset 1
