[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=27ed1ad2-766a-466f-a215-0d88ff612e6a ro splash quiet
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d4992fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d4993000-0x00000000d6e9dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d6e9e000-0x00000000d6f8efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6f8f000-0x00000000d6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Intel Corporation HuronRiver Platform/Emerald Lake, BIOS V2.19 03/19/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0D8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0D7000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff935f80097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x5a409000, 0x5a409fff] PGTABLE
[    0.000000] BRK [0x5a40a000, 0x5a40afff] PGTABLE
[    0.000000] BRK [0x5a40b000, 0x5a40bfff] PGTABLE
[    0.000000] BRK [0x5a40c000, 0x5a40cfff] PGTABLE
[    0.000000] BRK [0x5a40d000, 0x5a40dfff] PGTABLE
[    0.000000] BRK [0x5a40e000, 0x5a40efff] PGTABLE
[    0.000000] BRK [0x5a40f000, 0x5a40ffff] PGTABLE
[    0.000000] BRK [0x5a410000, 0x5a410fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32179000-0x350b3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000D6FFE120 00008C (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: FACP 0x00000000D6FED000 0000F4 (v03 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: DSDT 0x00000000D6FF0000 00BFAA (v02 ACRSYS SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000D6F2D000 000040
[    0.000000] ACPI: FACS 0x00000000D6F2D000 000040
[    0.000000] ACPI: SLIC 0x00000000D6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000D6FFC000 0001F9 (v01 ACRSYS PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000D6FEF000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: HPET 0x00000000D6FEC000 000038 (v01 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: APIC 0x00000000D6FEB000 000098 (v01 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: MCFG 0x00000000D6FEA000 00003C (v01 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000D6FE9000 000780 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000D6FE8000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000D6FE7000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000D6FE6000 000055 (v03 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000D6FE5000 00003E (v01 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000D6FE4000 000256 (v01 ACRSYS ACRPRDCT 00000001 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fdf9000-0x11fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000d4992fff]
[    0.000000]   node   0: [mem 0x00000000d6fff000-0x00000000d6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.000000] On node 0 totalpages: 1000240
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13527 pages used for memmap
[    0.000000]   DMA32 zone: 865684 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000d7a00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd4993000-0xd6e9dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6e9e000-0xd6f8efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6f8f000-0xd6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff93609fa00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 984453
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=27ed1ad2-766a-466f-a215-0d88ff612e6a ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3798280K/4000960K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 202680K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2294.532 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.06 BogoMIPS (lpj=9178128)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.015319] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.015361] Security Framework initialized
[    0.015362] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.015389] AppArmor: AppArmor initialized
[    0.016067] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016442] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.016465] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.016478] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.016703] Disabled fast string operations
[    0.016706] CPU: Physical Processor ID: 0
[    0.016707] CPU: Processor Core ID: 0
[    0.016713] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016713] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016718] mce: CPU supports 7 MCE banks
[    0.016727] CPU0: Thermal monitoring enabled (TM1)
[    0.016735] process: using mwait in idle threads
[    0.016738] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.016739] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.016740] Applying alternatives
[    0.016799] Applying alternatives done
[    0.016800] Applying alternatives smp done
[    0.016843] Freeing SMP alternatives memory: 28K
[    0.017680] smpboot: Max logical packages: 4
[    0.017755] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.018189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057886] TSC deadline timer enabled
[    0.057889] smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.072025] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.072084] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.072089] ... version:                3
[    0.072091] ... bit width:              48
[    0.072092] ... generic registers:      4
[    0.072094] ... value mask:             0000ffffffffffff
[    0.072096] ... max period:             00007fffffffffff
[    0.072106] ... fixed-purpose events:   3
[    0.072106] ... event mask:             000000070000000f
[    0.080009] Hierarchical SRCU implementation.
[    0.096308] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.104008] smp: Bringing up secondary CPUs ...
[    0.136085] x86: Booting SMP configuration:
[    0.136088] .... node  #0, CPUs:      #1
[    0.004000] Disabled fast string operations
[    0.168087]  #2
[    0.004000] Disabled fast string operations
[    0.200082]  #3
[    0.004000] Disabled fast string operations
[    0.202868] smp: Brought up 1 node, 4 CPUs
[    0.202868] smpboot: Total of 4 processors activated (18356.25 BogoMIPS)
[    0.204256] devtmpfs: initialized
[    0.204256] x86/mm: Memory block size: 128MB
[    0.204522] PM: Registering ACPI NVS region [mem 0xd6e9e000-0xd6f8efff] (987136 bytes)
[    0.204522] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.204522] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.204522] pinctrl core: initialized pinctrl subsystem
[    0.204522] NET: Registered protocol family 16
[    0.204522] cpuidle: using governor ladder
[    0.204522] cpuidle: using governor menu
[    0.204522] ACPI: bus type PCI registered
[    0.204522] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.204522] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.204522] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.204522] PCI: Using configuration type 1 for base access
[    0.204522] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.204522] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.204522] mtrr: probably your BIOS does not setup all CPUs.
[    0.204522] mtrr: corrected configuration.
[    0.204836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.204836] ACPI: Added _OSI(Module Device)
[    0.204836] ACPI: Added _OSI(Processor Device)
[    0.204836] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204836] ACPI: Added _OSI(Processor Aggregator Device)
[    0.204836] ACPI: Executed 1 blocks of module-level executable AML code
[    0.249083] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.249083] ACPI: Dynamic OEM Table Load:
[    0.249083] ACPI: SSDT 0xFFFF93609A7C2800 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.249087] ACPI: Dynamic OEM Table Load:
[    0.249087] ACPI: SSDT 0xFFFF93609A781C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.249087] ACPI: Dynamic OEM Table Load:
[    0.249087] ACPI: SSDT 0xFFFF93609A7C1800 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.249087] ACPI: EC: EC started
[    0.249087] ACPI: EC: interrupt blocked
[    0.260131] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.260133] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.260134] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.260135] ACPI: Interpreter enabled
[    0.260164] ACPI: (supports S0 S1 S3 S4 S5)
[    0.260166] ACPI: Using IOAPIC for interrupt routing
[    0.260192] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.260421] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.267204] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.267209] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.267247] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.267672] PCI host bridge to bus 0000:00
[    0.267674] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.267676] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.267677] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.267678] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.267680] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.267681] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.267689] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.267787] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.267797] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.267802] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.267806] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.267917] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.267942] pci 0000:00:16.0: reg 0x10: [mem 0xf0505000-0xf050500f 64bit]
[    0.268017] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.268102] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.268124] pci 0000:00:1a.0: reg 0x10: [mem 0xf050a000-0xf050a3ff]
[    0.268207] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.268292] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.268313] pci 0000:00:1b.0: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit]
[    0.268387] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.268484] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.268611] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.268712] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.268847] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.268944] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.268965] pci 0000:00:1d.0: reg 0x10: [mem 0xf0509000-0xf05093ff]
[    0.269049] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.269132] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.269310] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.269327] pci 0000:00:1f.2: reg 0x10: [io  0x2088-0x208f]
[    0.269334] pci 0000:00:1f.2: reg 0x14: [io  0x2094-0x2097]
[    0.269341] pci 0000:00:1f.2: reg 0x18: [io  0x2080-0x2087]
[    0.269348] pci 0000:00:1f.2: reg 0x1c: [io  0x2090-0x2093]
[    0.269355] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.269362] pci 0000:00:1f.2: reg 0x24: [mem 0xf0508000-0xf05087ff]
[    0.269402] pci 0000:00:1f.2: PME# supported from D3hot
[    0.269475] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.269493] pci 0000:00:1f.3: reg 0x10: [mem 0xf0504000-0xf05040ff 64bit]
[    0.269513] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.269666] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.269802] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[    0.269848] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf040ffff 64bit pref]
[    0.269870] pci 0000:02:00.0: reg 0x18: [mem 0xf0410000-0xf041ffff 64bit pref]
[    0.269911] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.270023] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.270152] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[    0.270197] pci 0000:02:00.1: reg 0x10: [mem 0xf0420000-0xf042ffff 64bit pref]
[    0.270360] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.270476] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000
[    0.270519] pci 0000:02:00.2: reg 0x10: [mem 0xf0430000-0xf043ffff 64bit pref]
[    0.270680] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[    0.270795] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000
[    0.270840] pci 0000:02:00.3: reg 0x10: [mem 0xf0440000-0xf044ffff 64bit pref]
[    0.271003] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[    0.280109] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.280124] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.280636] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.280695] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.280753] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.280809] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.280865] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.280921] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.280977] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.281032] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.281258] ACPI: EC: interrupt unblocked
[    0.281264] ACPI: EC: event unblocked
[    0.281270] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.281271] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.281383] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.281383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.281383] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.281383] vgaarb: loaded
[    0.281383] EDAC MC: Ver: 3.0.0
[    0.281383] PCI: Using ACPI for IRQ routing
[    0.281611] PCI: pci_cache_line_size set to 64 bytes
[    0.281718] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.281719] e820: reserve RAM buffer [mem 0xd4993000-0xd7ffffff]
[    0.281720] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[    0.281721] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.281834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.281834] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.286023] clocksource: Switched to clocksource hpet
[    0.293628] VFS: Disk quotas dquot_6.6.0
[    0.293655] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.293770] AppArmor: AppArmor Filesystem Enabled
[    0.293792] pnp: PnP ACPI init
[    0.293943] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.293946] system 00:00: [io  0xffff] has been reserved
[    0.293947] system 00:00: [io  0xffff] has been reserved
[    0.293949] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.293950] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.293953] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.293955] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.293960] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.293988] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.294046] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.294050] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.294120] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.294145] pnp 00:04: Plug and Play ACPI device, IDs SYN1b45 SYN1b00 SYN0002 PNP0f13 (active)
[    0.294271] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.294272] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.294274] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.294275] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.294277] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.294278] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.294280] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.294281] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.294283] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.294285] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.294288] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294512] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.294514] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.294517] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.294540] pnp: PnP ACPI: found 7 devices
[    0.300800] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.300805] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    0.300836] pci 0000:00:1c.3: BAR 14: assigned [mem 0xdfa00000-0xdfafffff]
[    0.300838] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.300856] pci 0000:02:00.0: BAR 6: assigned [mem 0xdfa00000-0xdfa007ff pref]
[    0.300858] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.300864] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfafffff]
[    0.300868] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.300877] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.300878] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.300880] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.300881] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.300882] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.300883] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
[    0.300885] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.300981] NET: Registered protocol family 2
[    0.301152] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.301224] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.301294] TCP: Hash tables configured (established 32768 bind 32768)
[    0.301338] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.301354] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.301413] NET: Registered protocol family 1
[    0.301426] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.301844] PCI: CLS 64 bytes, default 64
[    0.301891] Unpacking initramfs...
[    1.140204] Freeing initrd memory: 48364K
[    1.140208] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.140211] software IO TLB [mem 0xd0993000-0xd4993000] (64MB) mapped at [ffff936050993000-ffff936054992fff]
[    1.140639] audit: initializing netlink subsys (disabled)
[    1.140702] audit: type=2000 audit(1520388473.140:1): state=initialized audit_enabled=0 res=1
[    1.141036] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.141075] zbud: loaded
[    1.546575] Key type asymmetric registered
[    1.546576] Asymmetric key parser 'x509' registered
[    1.546596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.546635] io scheduler noop registered
[    1.546636] io scheduler deadline registered
[    1.546655] io scheduler cfq registered (default)
[    1.546656] io scheduler mq-deadline registered
[    1.547098] intel_idle: disabled
[    1.552358] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.552747] Linux agpgart interface v0.103
[    1.552803] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.552804] AMD IOMMUv2 functionality not available on this system
[    1.553120] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.555393] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.555423] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.555511] mousedev: PS/2 mouse device common for all mice
[    1.555551] rtc_cmos 00:01: RTC can wake from S4
[    1.555673] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.555697] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.555746] ledtrig-cpu: registered to indicate activity on CPUs
[    1.556044] NET: Registered protocol family 10
[    1.556297] Segment Routing with IPv6
[    1.556311] mip6: Mobile IPv6
[    1.556312] NET: Registered protocol family 17
[    1.556315] mpls_gso: MPLS GSO support
[    1.556563] microcode: sig=0x206a7, pf=0x10, revision=0x23
[    1.556662] microcode: Microcode Update Driver: v2.2.
[    1.556671] sched_clock: Marking stable (1556657856, 0)->(1556327278, 330578)
[    1.556874] registered taskstats version 1
[    1.556890] zswap: loaded using pool lzo/zbud
[    1.556961] AppArmor: AppArmor sha1 policy hashing enabled
[    1.556963] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.557269] rtc_cmos 00:01: setting system clock to 2018-03-07 02:07:53 UTC (1520388473)
[    1.559487] Freeing unused kernel memory: 1460K
[    1.559489] Write protecting the kernel read-only data: 16384k
[    1.560111] Freeing unused kernel memory: 2012K
[    1.562650] Freeing unused kernel memory: 1036K
[    1.568953] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.568954] x86/mm: Checking user space page tables
[    1.571743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.575119] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.617874] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.617935] ACPI: Lid Switch [LID0]
[    1.618015] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.618033] ACPI: Sleep Button [SLPB]
[    1.618241] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.618259] ACPI: Power Button [PWRF]
[    1.626922] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.627051] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.627218] thermal LNXTHERM:00: registered as thermal_zone0
[    1.627220] ACPI: Thermal Zone [TZS0] (52 C)
[    1.627586] thermal LNXTHERM:01: registered as thermal_zone1
[    1.627588] ACPI: Thermal Zone [TZS1] (39 C)
[    1.631665] pps_core: LinuxPPS API ver. 1 registered
[    1.631667] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.632121] PTP clock support registered
[    1.632554] sdhci: Secure Digital Host Controller Interface driver
[    1.632556] sdhci: Copyright(c) Pierre Ossman
[    1.633745] tg3.c:v3.137 (May 11, 2014)
[    1.636045] ACPI: bus type USB registered
[    1.636088] usbcore: registered new interface driver usbfs
[    1.636101] usbcore: registered new interface driver hub
[    1.636148] usbcore: registered new device driver usb
[    1.637221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.637490] ehci-pci: EHCI PCI platform driver
[    1.637736] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.637747] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.637764] ehci-pci 0000:00:1a.0: debug port 2
[    1.640002] SCSI subsystem initialized
[    1.641678] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.641705] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf050a000
[    1.643602] libata version 3.00 loaded.
[    1.652666] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:6a:8a:46:f3:34
[    1.652670] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    1.652673] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.652675] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    1.652910] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    1.653479] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit
[    1.656082] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.656260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.656263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.656265] usb usb1: Product: EHCI Host Controller
[    1.656267] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.656269] usb usb1: SerialNumber: 0000:00:1a.0
[    1.656447] hub 1-0:1.0: USB hub found
[    1.656459] hub 1-0:1.0: 2 ports detected
[    1.656801] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.656808] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.656822] ehci-pci 0000:00:1d.0: debug port 2
[    1.660721] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.660740] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0509000
[    1.672964] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[    1.676125] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.676458] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.676460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.676461] usb usb2: Product: EHCI Host Controller
[    1.676463] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.676464] usb usb2: SerialNumber: 0000:00:1d.0
[    1.676642] hub 2-0:1.0: USB hub found
[    1.676663] hub 2-0:1.0: 2 ports detected
[    1.677153] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.677583] ahci 0000:00:1f.2: version 3.0
[    1.677776] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.687958] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[    1.687974] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.716763] scsi host0: ahci
[    1.716965] scsi host1: ahci
[    1.717087] scsi host2: ahci
[    1.717198] scsi host3: ahci
[    1.717321] scsi host4: ahci
[    1.717431] scsi host5: ahci
[    1.717492] ata1: SATA max UDMA/133 abar m2048@0xf0508000 port 0xf0508100 irq 24
[    1.717495] ata2: SATA max UDMA/133 abar m2048@0xf0508000 port 0xf0508180 irq 24
[    1.717496] ata3: DUMMY
[    1.717498] ata4: DUMMY
[    1.717499] ata5: DUMMY
[    1.717500] ata6: SATA max UDMA/133 abar m2048@0xf0508000 port 0xf0508380 irq 24
[    1.717972] [drm] Memory usable by graphics device = 2048M
[    1.717974] [drm] Replacing VGA console driver
[    1.718413] Console: switching to colour dummy device 80x25
[    1.724163] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.724164] [drm] Driver supports precise vblank timestamp query.
[    1.726619] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.770624] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.771252] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.773919] acpi device:37: registered as cooling_device4
[    1.773992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    1.796957] fbcon: inteldrmfb (fb0) is primary device
[    1.992153] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.012111] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.031759] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.037997] ata1.00: ATA-8: SAMSUNG HN-M500MBB, 2AR10001, max UDMA/133
[    2.038002] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.044451] ata1.00: configured for UDMA/133
[    2.044700] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HN-M500M 0001 PQ: 0 ANSI: 5
[    2.148343] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[    2.148361] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[    2.148942] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.148943] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.149918] hub 1-1:1.0: USB hub found
[    2.150452] hub 1-1:1.0: 6 ports detected
[    2.168819] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.168821] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.169127] hub 2-1:1.0: USB hub found
[    2.169185] hub 2-1:1.0: 6 ports detected
[    2.293501] psmouse serio1: synaptics: queried max coordinates: x [..5576], y [..4880]
[    2.345489] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 641896
[    2.358581] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.359607] ata2.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[    2.359611] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.360772] ata2.00: configured for UDMA/133
[    2.361117] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[    2.379587] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.436171] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    2.456187] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    2.547958] usb 1-1.2: New USB device found, idVendor=24ae, idProduct=2000
[    2.547960] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.547962] usb 1-1.2: Product: RAPOO 2.4G Wireless Device
[    2.547962] usb 1-1.2: Manufacturer: RAPOO
[    2.550586] hidraw: raw HID events driver (C) Jiri Kosina
[    2.555212] usbcore: registered new interface driver usbhid
[    2.555213] usbhid: USB HID core driver
[    2.555918] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:24AE:2000.0001/input/input7
[    2.571718] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8187
[    2.571720] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.571722] usb 2-1.2: Product: RTL8187_Wireless
[    2.571723] usb 2-1.2: Manufacturer: Manufacturer_Realtek_RTL8187_
[    2.571723] usb 2-1.2: SerialNumber: 00252239E333
[    2.612426] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1a.0-1.2/input0
[    2.612754] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:24AE:2000.0002/input/input8
[    2.628162] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    2.672518] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1a.0-1.2/input1
[    2.675511] ata6: SATA link down (SStatus 0 SControl 300)
[    2.723521] Console: switching to colour frame buffer device 170x48
[    2.742782] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.760696] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.760713] sd 1:0:0:0: [sdb] Write Protect is off
[    2.760716] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.760741] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.760875] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.760885] sd 0:0:0:0: [sda] Write Protect is off
[    2.760887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.760905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.786346] usb 1-1.5: New USB device found, idVendor=058f, idProduct=b002
[    2.786350] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.786352] usb 1-1.5: Product: 1.3M HD WebCam
[    2.786353] usb 1-1.5: Manufacturer: AAC1W09PX
[    2.875336]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda2 sda3 sda4
[    2.876260] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.168247] clocksource: Switched to clocksource tsc
[    3.168510]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[    3.169290] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.448143] raid6: sse2x1   gen()  5933 MB/s
[    4.496088] raid6: sse2x1   xor()  4543 MB/s
[    4.544070] raid6: sse2x2   gen()  7446 MB/s
[    4.592069] raid6: sse2x2   xor()  5408 MB/s
[    4.640073] raid6: sse2x4   gen()  8662 MB/s
[    4.688088] raid6: sse2x4   xor()  6391 MB/s
[    4.688090] raid6: using algorithm sse2x4 gen() 8662 MB/s
[    4.688091] raid6: .... xor() 6391 MB/s, rmw enabled
[    4.688092] raid6: using ssse3x2 recovery algorithm
[    4.688460] xor: automatically using best checksumming function   avx       
[    4.688706] async_tx: api initialized (async)
[    5.247591] Btrfs loaded, crc32c=crc32c-intel
[    5.305946] random: crng init done
[    6.750565] PM: Starting manual resume from disk
[    6.750788] PM: Image not found (code -22)
[    7.162201] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    8.520975] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.613561] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    8.613709] systemd[1]: Detected architecture x86-64.
[    8.625995] systemd[1]: Set hostname to <ljq-PC>.
[    9.811361] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.811460] systemd[1]: Listening on LVM2 poll daemon socket.
[    9.811545] systemd[1]: Listening on Journal Audit Socket.
[    9.811599] systemd[1]: Listening on Journal Socket.
[    9.811789] systemd[1]: Created slice System Slice.
[    9.812526] systemd[1]: Mounting Kernel Debug File System...
[    9.864155] systemd[1]: Starting Load Kernel Modules...
[    9.981501] call_modprobe: fs-binfmt_misc   2 
[   10.071937] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[   10.152359] systemd-journald[275]: Received request to flush runtime journal from PID 1
[   10.291054] call_modprobe: parport_lowlevel   2 
[   10.595775] lp: driver loaded but no devices found
[   10.687483] call_modprobe: parport_lowlevel   2 
[   10.688338] ppdev: user-space parallel port driver
[   10.867454] bbswitch: loading out-of-tree module taints kernel.
[   10.867749] bbswitch: version 0.8
[   10.867755] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   10.867759] bbswitch: No discrete VGA device found
[   10.967799] fuse init (API version 7.26)
[   13.619883] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.643936] ACPI: Battery Slot [BAT0] (battery present)
[   13.690776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.690817] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   13.745377] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[   13.745384] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.745386] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   13.745389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.745390] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   13.745393] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.745393] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   13.745396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.745396] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.052144] acer_wmi: Acer Laptop ACPI-WMI Extras
[   14.052150] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[   14.063857] ACPI: AC Adapter [ADP1] (on-line)
[   14.243567] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   15.313637] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   15.313640] call_modprobe: i915   2 
[   15.437457] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   15.437459] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   15.437460] RAPL PMU: hw unit of domain package 2^-16 Joules
[   15.437460] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   16.541368] call_modprobe: hdaudio:v10EC0269r00100100a01
                  2 
[   16.702822] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[   16.703675] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[   16.789443] media: Linux media interface: v0.10
[   16.860381] Linux video capture interface: v2.00
[   17.069125] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0
[   17.069701] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.069702] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.069704] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   17.069705] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.069705] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.069707] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x1b
[   17.069708] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   17.076336] call_modprobe: hdaudio:v80862805r00100000a01
                  2 
[   17.390007] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.390306] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.390358] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.390412] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.507651] Adding 5013500k swap on /dev/sda3.  Priority:-2 extents:1 across:5013500k FS
[   17.537270] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
[   17.540426] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[   17.540429] uvcvideo 1-1.5:1.0: Entity type for entity Extension 6 was not initialized!
[   17.540431] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   17.540520] input: 1.3M HD WebCam: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[   17.540597] usbcore: registered new interface driver uvcvideo
[   17.540598] USB Video Class driver (1.1.1)
[   17.760615] intel_rapl: Found RAPL domain package
[   17.760617] intel_rapl: Found RAPL domain core
[   17.760618] intel_rapl: Found RAPL domain uncore
[   17.760624] intel_rapl: RAPL package 0 domain package locked by BIOS
[   17.807649] call_modprobe: crypto-arc4   2 
[   17.834131] call_modprobe: crypto-arc4-all   2 
[   17.834913] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.835130] ieee80211 phy0: hwaddr 00:25:22:39:e3:33, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   17.846215] rtl8187: Customer ID is 0x00
[   17.846819] rtl8187: wireless switch is on
[   17.846875] usbcore: registered new interface driver rtl8187
[   17.957568] iTCO_vendor_support: vendor-support=0
[   17.979843] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   17.979901] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   17.980035] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.235040] rtl8187 2-1.2:1.0 wlx00252239e333: renamed from wlan0
[   20.070318] call_modprobe: netdev---all   2 
[   20.071255] call_modprobe: --all   2 
[   20.071966] call_modprobe: netdev---all   2 
[   20.072631] call_modprobe: --all   2 
[   26.847375] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[   27.312567] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[   27.316632] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[   29.401960] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[   33.486700] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[   37.900772] wlx00252239e333: authenticate with 78:11:dc:15:cb:8c
[   38.190473] wlx00252239e333: send auth to 78:11:dc:15:cb:8c (try 1/3)
[   38.223644] wlx00252239e333: authenticated
[   38.224097] wlx00252239e333: associate with 78:11:dc:15:cb:8c (try 1/3)
[   38.255292] wlx00252239e333: RX AssocResp from 78:11:dc:15:cb:8c (capab=0xc11 status=0 aid=2)
[   38.256624] wlx00252239e333: associated
[   38.702357] call_modprobe: crypto-ccm(aes)   2 
[   38.703279] call_modprobe: crypto-ccm(aes)-all   2 
[   38.705202] call_modprobe: crypto-ccm   2 
[   38.738290] call_modprobe: crypto-cbcmac(aes)   2 
[   38.739094] call_modprobe: crypto-cbcmac(aes)-all   2 
[   38.740785] call_modprobe: crypto-ctr(aes)   2 
[   38.741458] call_modprobe: crypto-ctr(aes)-all   2 
[   38.742115] call_modprobe: crypto-ctr   2 
[   38.817993] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00252239e333: link becomes ready
[   42.277816] NET: Registered protocol family 15
[   42.948774] Initializing XFRM netlink socket
[   71.216836] call_modprobe: char-major-10-236   2 
[   71.285363] device-mapper: uevent: version 1.0.3
[   71.285430] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[  116.205964] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  116.239821] JFS: nTxBlock = 8192, nTxLock = 65536
[  116.355481] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[  116.455817] QNX4 filesystem 0.2.3 registered.
[ 3243.600723] wlx00252239e333: authenticate with 78:11:dc:15:cb:8c
[ 3243.892936] wlx00252239e333: send auth to 78:11:dc:15:cb:8c (try 1/3)
[ 3244.095097] wlx00252239e333: send auth to 78:11:dc:15:cb:8c (try 2/3)
[ 3244.299124] wlx00252239e333: send auth to 78:11:dc:15:cb:8c (try 3/3)
[ 3244.503022] wlx00252239e333: authentication with 78:11:dc:15:cb:8c timed out
[ 3257.281244] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[ 3271.785733] usb 2-1.2: USB disconnect, device number 3
[ 3276.950952] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 3277.065957] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8187
[ 3277.065965] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3277.065970] usb 2-1.2: Product: RTL8187_Wireless
[ 3277.065973] usb 2-1.2: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 3277.065976] usb 2-1.2: SerialNumber: 00252239E333
[ 3277.251343] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 3277.254855] ieee80211 phy1: hwaddr 00:25:22:39:e3:33, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 3277.269322] rtl8187: Customer ID is 0x00
[ 3277.269935] rtl8187: wireless switch is on
[ 3277.607430] rtl8187 2-1.2:1.0 wlx00252239e333: renamed from wlan0
[ 3277.727563] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[ 3279.844194] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[ 3279.907126] IPv6: ADDRCONF(NETDEV_UP): wlx00252239e333: link is not ready
[ 3284.283589] wlx00252239e333: authenticate with 78:11:dc:15:cb:8c
[ 3284.561430] wlx00252239e333: send auth to 78:11:dc:15:cb:8c (try 1/3)
[ 3284.593873] wlx00252239e333: authenticated
[ 3284.598862] wlx00252239e333: associate with 78:11:dc:15:cb:8c (try 1/3)
[ 3284.633827] wlx00252239e333: RX AssocResp from 78:11:dc:15:cb:8c (capab=0xc11 status=0 aid=2)
[ 3284.634974] wlx00252239e333: associated
[ 3285.859023] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00252239e333: link becomes ready
[ 4764.863581] perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[ 5059.758857] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5072.991370] call_modprobe: net-pf-31   2 
[ 5073.071874] call_modprobe: crypto-stdrng   2 
[ 5073.093804] call_modprobe: crypto-hmac(sha256)   2 
[ 5073.095702] call_modprobe: crypto-hmac(sha256)-all   2 
[ 5073.098145] call_modprobe: crypto-stdrng-all   2 
[ 5073.149936] Bluetooth: Core ver 2.22
[ 5073.149964] NET: Registered protocol family 31
[ 5073.149965] Bluetooth: HCI device and connection manager initialized
[ 5073.149970] Bluetooth: HCI socket layer initialized
[ 5073.149972] Bluetooth: L2CAP socket layer initialized
[ 5073.149980] Bluetooth: SCO socket layer initialized
