[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=86b31e7d-e2f1-4dae-ba30-2d0983bb3d0d ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077c5efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077c5f000-0x0000000077c60fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077c61000-0x0000000077f5bfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077f5c000-0x0000000077f5cfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077f5d000-0x0000000099bbefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099bbf000-0x00000000aca8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aca90000-0x00000000aca90fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aca91000-0x00000000b7f7afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7f7b000-0x00000000b7fcafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7fcb000-0x00000000b7ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b7fff000-0x00000000b80fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004427fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 20FNA069CD/20FNA069CD, BIOS R06ET39W (1.13 ) 07/11/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x442800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00BC000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 00BA000000 mask 7FFE000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x99bbf max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8b8600097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x359a09000, 0x359a09fff] PGTABLE
[    0.000000] BRK [0x359a0a000, 0x359a0afff] PGTABLE
[    0.000000] BRK [0x359a0b000, 0x359a0bfff] PGTABLE
[    0.000000] BRK [0x359a0c000, 0x359a0cfff] PGTABLE
[    0.000000] BRK [0x359a0d000, 0x359a0dfff] PGTABLE
[    0.000000] BRK [0x359a0e000, 0x359a0efff] PGTABLE
[    0.000000] BRK [0x359a0f000, 0x359a0ffff] PGTABLE
[    0.000000] BRK [0x359a10000, 0x359a10fff] PGTABLE
[    0.000000] BRK [0x359a11000, 0x359a11fff] PGTABLE
[    0.000000] BRK [0x359a12000, 0x359a12fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x327e9000-0x353ebfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000B7FD0188 0000CC (v01 LENOVO TP-R06   00000000 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000B7FF6000 0000F4 (v05 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000B7FDF000 0125B5 (v02 LENOVO TP-R06   00001130 INTL 20141107)
[    0.000000] ACPI: FACS 0x00000000B7FA7000 000040
[    0.000000] ACPI: UEFI 0x00000000B7FBE000 000042 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000B7FF8000 004E2E (v02 LENOVO SaSsdt   00003000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000B7FF7000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107)
[    0.000000] ACPI: ECDT 0x00000000B7FF5000 000052 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000B7FF4000 000038 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000B7FF3000 0000BC (v03 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000B7FF2000 00003C (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000B7FDD000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107)
[    0.000000] ACPI: DBGP 0x00000000B7FDC000 000034 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: DBG2 0x00000000B7FDB000 000054 (v00 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: BOOT 0x00000000B7FDA000 000028 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: BATB 0x00000000B7FD9000 000046 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000B7FD8000 000E73 (v02 LENOVO CpuSsdt  00003000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000B7FD7000 0003D9 (v02 LENOVO CtdpB    00001000 INTL 20141107)
[    0.000000] ACPI: MSDM 0x00000000B7FD6000 000055 (v03 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000B7FD5000 000024 (v01 LENOVO NvOptTbl 00001000 INTL 20141107)
[    0.000000] ACPI: SSDT 0x00000000B7FD3000 0013A7 (v02 LENOVO SgPch    00001000 INTL 20141107)
[    0.000000] ACPI: ASF! 0x00000000B7FD2000 0000A5 (v32 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000B7FD1000 000044 (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000B7F84000 00012A (v01 LENOVO TP-R06   00001130 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000004427fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x4427fb000-0x4427fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000004427fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000077c5efff]
[    0.000000]   node   0: [mem 0x0000000077c61000-0x0000000077f5bfff]
[    0.000000]   node   0: [mem 0x0000000077f5d000-0x0000000099bbefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000004427fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004427fffff]
[    0.000000] On node 0 totalpages: 4047704
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9775 pages used for memmap
[    0.000000]   DMA32 zone: 625596 pages, LIFO batch:31
[    0.000000]   Normal zone: 53408 pages used for memmap
[    0.000000]   Normal zone: 3418112 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000ba800000-0x00000000bc7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x77c5f000-0x77c60fff]
[    0.000000] PM: Registered nosave memory: [mem 0x77f5c000-0x77f5cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x99bbf000-0xaca8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaca90000-0xaca90fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaca91000-0xb7f7afff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7f7b000-0xb7fcafff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7fcb000-0xb7ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7fff000-0xb80fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8100000-0xb85fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0xbc800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff8b8a42400000 s143000 r8192 d29032 u524288
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3984436
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=86b31e7d-e2f1-4dae-ba30-2d0983bb3d0d ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15800168K/16190816K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 390648K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] tsc: Detected 2400.000 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.037336] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.037371] Security Framework initialized
[    0.037372] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.037394] AppArmor: AppArmor initialized
[    0.039930] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.041235] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.041283] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.041323] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.041525] CPU: Physical Processor ID: 0
[    0.041525] CPU: Processor Core ID: 0
[    0.041531] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.041531] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.041537] mce: CPU supports 8 MCE banks
[    0.041547] CPU0: Thermal monitoring enabled (TM1)
[    0.041564] process: using mwait in idle threads
[    0.041566] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.041567] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.041568] Applying alternatives
[    0.041615] Applying alternatives done
[    0.041615] Applying alternatives smp done
[    0.041976] Freeing SMP alternatives memory: 28K
[    0.044061] smpboot: Max logical packages: 2
[    0.045267] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.049943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092000] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.104035] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.104118] ... version:                4
[    0.104119] ... bit width:              48
[    0.104119] ... generic registers:      4
[    0.104120] ... value mask:             0000ffffffffffff
[    0.104120] ... max period:             00007fffffffffff
[    0.104121] ... fixed-purpose events:   3
[    0.104122] ... event mask:             000000070000000f
[    0.112013] Hierarchical SRCU implementation.
[    0.128175] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.136011] smp: Bringing up secondary CPUs ...
[    0.168105] x86: Booting SMP configuration:
[    0.168106] .... node  #0, CPUs:      #1 #2 #3
[    0.232604] smp: Brought up 1 node, 4 CPUs
[    0.232604] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
[    0.236456] devtmpfs: initialized
[    0.236456] x86/mm: Memory block size: 128MB
[    0.237276] PM: Registering ACPI NVS region [mem 0xaca90000-0xaca90fff] (4096 bytes)
[    0.237276] PM: Registering ACPI NVS region [mem 0xb7f7b000-0xb7fcafff] (327680 bytes)
[    0.237276] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.237276] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.237276] pinctrl core: initialized pinctrl subsystem
[    0.237307] NET: Registered protocol family 16
[    0.237450] cpuidle: using governor ladder
[    0.240034] cpuidle: using governor menu
[    0.240097] Simple Boot Flag at 0x47 set to 0x1
[    0.240116] ACPI: bus type PCI registered
[    0.240117] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.240278] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.244028] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.244034] PCI: Using configuration type 1 for base access
[    0.244840] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.244840] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.244843] ACPI: Added _OSI(Module Device)
[    0.244843] ACPI: Added _OSI(Processor Device)
[    0.244843] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.244843] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244843] ACPI: EC: EC started
[    0.244843] ACPI: EC: interrupt blocked
[    0.245650] ACPI: \: Used as first EC
[    0.245652] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.245653] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.253492] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.262457] ACPI: Dynamic OEM Table Load:
[    0.262471] ACPI: SSDT 0xFFFF8B8A3015A800 00068B (v02 PmRef  Cpu0Ist  00003000 INTL 20141107)
[    0.262709] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.264739] ACPI: Dynamic OEM Table Load:
[    0.264746] ACPI: SSDT 0xFFFF8B8A30156400 0003CF (v02 PmRef  Cpu0Cst  00003001 INTL 20141107)
[    0.265023] ACPI: Dynamic OEM Table Load:
[    0.265028] ACPI: SSDT 0xFFFF8B8A30152840 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20141107)
[    0.265200] ACPI: Dynamic OEM Table Load:
[    0.265204] ACPI: SSDT 0xFFFF8B8A3014EA00 000130 (v02 PmRef  HwpLvt   00003000 INTL 20141107)
[    0.265866] ACPI: Dynamic OEM Table Load:
[    0.265873] ACPI: SSDT 0xFFFF8B8A30196000 0005AA (v02 PmRef  ApIst    00003000 INTL 20141107)
[    0.266397] ACPI: Dynamic OEM Table Load:
[    0.266402] ACPI: SSDT 0xFFFF8B8A3014EE00 000119 (v02 PmRef  ApHwp    00003000 INTL 20141107)
[    0.266674] ACPI: Dynamic OEM Table Load:
[    0.266679] ACPI: SSDT 0xFFFF8B8A3014E800 000119 (v02 PmRef  ApCst    00003000 INTL 20141107)
[    0.268106] ACPI: Interpreter enabled
[    0.268157] ACPI: (supports S0 S3 S4 S5)
[    0.268158] ACPI: Using IOAPIC for interrupt routing
[    0.268186] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.268425] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.271736] ACPI: Power Resource [PUBS] (on)
[    0.273059] ACPI: Power Resource [PG00] (on)
[    0.273174] ACPI: Power Resource [PG01] (on)
[    0.273286] ACPI: Power Resource [PG02] (on)
[    0.275236] ACPI: Power Resource [WRST] (off)
[    0.275481] ACPI: Power Resource [WRST] (off)
[    0.275533] ACPI: Power Resource [PC09] (on)
[    0.318762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.318845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.318925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319084] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319162] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319240] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319319] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.319420] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.319425] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.319518] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.319559] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.319561] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.319562] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.319563] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.319773] PCI host bridge to bus 0000:00
[    0.319776] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.319777] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.319778] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.319779] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window]
[    0.319780] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.319789] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.319886] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.319898] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf2ffffff 64bit]
[    0.319904] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.319909] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    0.320087] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.320109] pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit]
[    0.320183] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.320356] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.320378] pci 0000:00:14.2: reg 0x10: [mem 0xf424a000-0xf424afff 64bit]
[    0.320517] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.320542] pci 0000:00:16.0: reg 0x10: [mem 0xf424b000-0xf424bfff 64bit]
[    0.320614] pci 0000:00:16.0: PME# supported from D3hot
[    0.320761] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.320778] pci 0000:00:17.0: reg 0x10: [mem 0xf4248000-0xf4249fff]
[    0.320785] pci 0000:00:17.0: reg 0x14: [mem 0xf424e000-0xf424e0ff]
[    0.320792] pci 0000:00:17.0: reg 0x18: [io  0xe080-0xe087]
[    0.320798] pci 0000:00:17.0: reg 0x1c: [io  0xe088-0xe08b]
[    0.320805] pci 0000:00:17.0: reg 0x20: [io  0xe060-0xe07f]
[    0.320811] pci 0000:00:17.0: reg 0x24: [mem 0xf424c000-0xf424c7ff]
[    0.320849] pci 0000:00:17.0: PME# supported from D3hot
[    0.320983] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.321047] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.321185] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[    0.321248] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.321397] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.321460] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.321621] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.321849] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.321864] pci 0000:00:1f.2: reg 0x10: [mem 0xf4244000-0xf4247fff]
[    0.322037] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.322066] pci 0000:00:1f.3: reg 0x10: [mem 0xf4240000-0xf4243fff 64bit]
[    0.322097] pci 0000:00:1f.3: reg 0x20: [mem 0xf4230000-0xf423ffff 64bit]
[    0.322148] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.322279] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.322339] pci 0000:00:1f.4: reg 0x10: [mem 0xf424d000-0xf424d0ff 64bit]
[    0.322408] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.322607] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
[    0.322632] pci 0000:00:1f.6: reg 0x10: [mem 0xf4200000-0xf421ffff]
[    0.322730] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.322902] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000
[    0.322931] pci 0000:02:00.0: reg 0x10: [mem 0xf4100000-0xf4100fff]
[    0.323061] pci 0000:02:00.0: supports D1 D2
[    0.323062] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.332069] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.332098] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.332403] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
[    0.332457] pci 0000:04:00.0: reg 0x10: [mem 0xf4000000-0xf4001fff 64bit]
[    0.332694] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.344546] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.344550] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.344611] pci 0000:06:00.0: [10de:134d] type 00 class 0x030200
[    0.344635] pci 0000:06:00.0: reg 0x10: [mem 0xf3000000-0xf3ffffff]
[    0.344648] pci 0000:06:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.344661] pci 0000:06:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.344669] pci 0000:06:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.344677] pci 0000:06:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.344882] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.344884] pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
[    0.344887] pci 0000:00:1d.0:   bridge window [mem 0xf3000000-0xf3ffffff]
[    0.344891] pci 0000:00:1d.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.346349] ACPI: EC: interrupt unblocked
[    0.346363] ACPI: EC: event unblocked
[    0.346375] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346376] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.346457] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.346457] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.346457] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.346457] vgaarb: loaded
[    0.346457] EDAC MC: Ver: 3.0.0
[    0.346457] PCI: Using ACPI for IRQ routing
[    0.352956] PCI: pci_cache_line_size set to 64 bytes
[    0.353489] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.353491] e820: reserve RAM buffer [mem 0x77c5f000-0x77ffffff]
[    0.353492] e820: reserve RAM buffer [mem 0x77f5c000-0x77ffffff]
[    0.353492] e820: reserve RAM buffer [mem 0x99bbf000-0x9bffffff]
[    0.353493] e820: reserve RAM buffer [mem 0x442800000-0x443ffffff]
[    0.353592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.353592] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.356001] clocksource: Switched to clocksource hpet
[    0.364594] VFS: Disk quotas dquot_6.6.0
[    0.364613] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.364714] AppArmor: AppArmor Filesystem Enabled
[    0.364728] pnp: PnP ACPI init
[    0.365128] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.365130] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.365131] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.365132] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.365134] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.365135] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.365136] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.365138] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.365139] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.365140] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.365142] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.365143] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.365144] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.365146] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.365147] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved
[    0.365149] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.365150] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.365154] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.365284] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.365286] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.365288] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.365290] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.365291] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.365292] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.365293] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.365295] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.365296] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.365297] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.365298] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.365300] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.365302] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.365303] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.365304] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.365306] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.365307] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.365309] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.365310] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.365311] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[    0.365315] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365383] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.365404] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.365421] pnp 00:04: Plug and Play ACPI device, IDs LEN2016 PNP0f13 (active)
[    0.365458] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.365460] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.366130] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.366132] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.366133] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.366135] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.366136] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.366138] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.366139] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.366143] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.366462] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.366464] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.366539] pnp: PnP ACPI: found 8 devices
[    0.374042] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.374047] pci 0000:06:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.374068] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.374072] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.374077] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.374081] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.374088] pci 0000:06:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.374090] pci 0000:06:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.374091] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.374093] pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
[    0.374096] pci 0000:00:1d.0:   bridge window [mem 0xf3000000-0xf3ffffff]
[    0.374099] pci 0000:00:1d.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.374104] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.374105] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.374106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.374107] pci_bus 0000:00: resource 7 [mem 0xbc800000-0xfebfffff window]
[    0.374108] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.374110] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.374111] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.374112] pci_bus 0000:06: resource 1 [mem 0xf3000000-0xf3ffffff]
[    0.374113] pci_bus 0000:06: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.374214] NET: Registered protocol family 2
[    0.374386] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.374577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.374710] TCP: Hash tables configured (established 131072 bind 65536)
[    0.374744] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.374797] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.374870] NET: Registered protocol family 1
[    0.374883] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.375402] PCI: CLS 0 bytes, default 64
[    0.375436] Unpacking initramfs...
[    1.153748] Freeing initrd memory: 45068K
[    1.153756] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.153758] software IO TLB [mem 0x95bbf000-0x99bbf000] (64MB) mapped at [ffff8b8695bbf000-ffff8b8699bbefff]
[    1.153788] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    1.154148] audit: initializing netlink subsys (disabled)
[    1.154251] audit: type=2000 audit(1519951777.152:1): state=initialized audit_enabled=0 res=1
[    1.154582] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.154671] zbud: loaded
[    1.457273] Key type asymmetric registered
[    1.457274] Asymmetric key parser 'x509' registered
[    1.457289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.457349] io scheduler noop registered
[    1.457350] io scheduler deadline registered
[    1.457365] io scheduler cfq registered (default)
[    1.457365] io scheduler mq-deadline registered
[    1.457945] intel_idle: disabled
[    1.458648] Monitor-Mwait will be used to enter C-1 state
[    1.458674] Monitor-Mwait will be used to enter C-2 state
[    1.458699] Monitor-Mwait will be used to enter C-3 state
[    1.460176] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.460644] Linux agpgart interface v0.103
[    1.460694] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.460694] AMD IOMMUv2 functionality not available on this system
[    1.461024] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.463795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.463820] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.463949] mousedev: PS/2 mouse device common for all mice
[    1.463989] rtc_cmos 00:02: RTC can wake from S4
[    1.464583] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.464673] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.464862] ledtrig-cpu: registered to indicate activity on CPUs
[    1.465224] NET: Registered protocol family 10
[    1.465472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.465632] Segment Routing with IPv6
[    1.465647] mip6: Mobile IPv6
[    1.465649] NET: Registered protocol family 17
[    1.465653] mpls_gso: MPLS GSO support
[    1.466044] microcode: sig=0x406e3, pf=0x80, revision=0x8a
[    1.466182] microcode: Microcode Update Driver: v2.2.
[    1.466194] sched_clock: Marking stable (1466178629, 0)->(1570435058, -104256429)
[    1.466504] registered taskstats version 1
[    1.466519] zswap: loaded using pool lzo/zbud
[    1.466650] AppArmor: AppArmor sha1 policy hashing enabled
[    1.466653] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.467999] rtc_cmos 00:02: setting system clock to 2018-03-02 00:49:37 UTC (1519951777)
[    1.469538] Freeing unused kernel memory: 1460K
[    1.469539] Write protecting the kernel read-only data: 16384k
[    1.470082] Freeing unused kernel memory: 2012K
[    1.472539] Freeing unused kernel memory: 1036K
[    1.477485] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.477486] x86/mm: Checking user space page tables
[    1.482303] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.525509] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.525769] ACPI: Lid Switch [LID]
[    1.525839] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.525872] ACPI: Sleep Button [SLPB]
[    1.525959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.525984] ACPI: Power Button [PWRF]
[    1.536901] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.537026] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.539987] ACPI: bus type USB registered
[    1.540307] usbcore: registered new interface driver usbfs
[    1.540319] usbcore: registered new interface driver hub
[    1.540346] usbcore: registered new device driver usb
[    1.541807] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.543120] SCSI subsystem initialized
[    1.543224] pps_core: LinuxPPS API ver. 1 registered
[    1.543225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.545301] PTP clock support registered
[    1.547297] libata version 3.00 loaded.
[    1.547855] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.547856] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.554555] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.554563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.555663] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.555669] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.555994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.555996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.555998] usb usb1: Product: xHCI Host Controller
[    1.555999] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.556101] usb usb1: SerialNumber: 0000:00:14.0
[    1.556585] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.556711] hub 1-0:1.0: USB hub found
[    1.556832] hub 1-0:1.0: 12 ports detected
[    1.557163] thermal LNXTHERM:00: registered as thermal_zone0
[    1.557165] ACPI: Thermal Zone [THM0] (22 C)
[    1.558655] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.558660] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.558720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.558722] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.558724] usb usb2: Product: xHCI Host Controller
[    1.558725] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.558727] usb usb2: SerialNumber: 0000:00:14.0
[    1.558957] hub 2-0:1.0: USB hub found
[    1.558971] hub 2-0:1.0: 6 ports detected
[    1.559688] usb: port power management may be unreliable
[    1.560407] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.574735] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[    1.574896] ACPI Warning: \_SB.PCI0.RP09.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[    1.575065] pci 0000:06:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.575068] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP09.PEGP handle
[    1.575069] nouveau: detected PR support, will not use DSM
[    1.575098] nouveau 0000:06:00.0: enabling device (0006 -> 0007)
[    1.575304] nouveau 0000:06:00.0: NVIDIA GM108 (1180d0a2)
[    1.608339] nouveau 0000:06:00.0: bios: version 82.08.54.00.06
[    1.693729] nouveau 0000:06:00.0: fb: 2048 MiB DDR3
[    1.693753] nouveau 0000:06:00.0: bus: MMIO read of 00000000 FAULT at 612004 [ IBUS ]
[    1.695928] nouveau 0000:06:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[    1.768688] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.835552] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:3a:4d:5e
[    1.835558] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.835700] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[    1.835738] ahci 0000:00:17.0: version 3.0
[    1.836064] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    1.836067] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.836446] scsi host0: ahci
[    1.836573] scsi host1: ahci
[    1.836610] ata1: DUMMY
[    1.836615] ata2: SATA max UDMA/133 abar m2048@0xf424c000 port 0xf424c180 irq 124
[    1.836704] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    1.839392] [drm] Memory usable by graphics device = 4096M
[    1.839394] [drm] Replacing VGA console driver
[    1.848852] Console: switching to colour dummy device 80x25
[    1.849466] i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
[    1.849467] i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
[    1.855166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.855167] [drm] Driver supports precise vblank timestamp query.
[    1.857395] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.857497] request_firmware: i915/skl_dmc_ver1_26.bin
[    1.857523] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    1.863157] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    1.892049] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    2.042733] usb 1-2: New USB device found, idVendor=17ef, idProduct=604d
[    2.042735] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.042736] usb 1-2: Product: Lenovo USB Receiver
[    2.044713] hidraw: raw HID events driver (C) Jiri Kosina
[    2.050323] usbcore: registered new interface driver usbhid
[    2.050324] usbhid: USB HID core driver
[    2.051055] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:17EF:604D.0001/input/input6
[    2.108374] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:14.0-2/input0
[    2.108505] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:17EF:604D.0002/input/input7
[    2.108633] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:14.0-2/input1
[    2.108872] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:17EF:604D.0003/input/input8
[    2.151605] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.152066] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.152068] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.152070] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.152364] ata2.00: ATA-11: KINGSTON SUV400S37240G, 0C3FD6SD, max UDMA/133
[    2.152368] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.152917] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.152919] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.152920] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.153219] ata2.00: configured for UDMA/133
[    2.153515] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SUV400S D6SD PQ: 0 ANSI: 5
[    2.155796] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.155798] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.155832] sd 1:0:0:0: [sda] Write Protect is off
[    2.155835] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.155887] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.156758]  sda: sda1 < sda5 >
[    2.157348] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.168367] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.168459] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:14.0-2/input2
[    2.172117] clocksource: Switched to clocksource tsc
[    2.316875] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
[    2.316877] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.318769] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    2.349245] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    2.349248] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    2.403670] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf006a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2010421
[    2.403676] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.439877] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.444011] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[    2.594185] usb 1-9: New USB device found, idVendor=138a, idProduct=0017
[    2.594187] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.594188] usb 1-9: SerialNumber: ad11c63d4e37
[    2.720010] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[    2.877813] usb 1-10: New USB device found, idVendor=5986, idProduct=0706
[    2.877815] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.877817] usb 1-10: Product: Integrated Camera
[    2.877818] usb 1-10: Manufacturer: SunplusIT Inc
[    2.976159] vga_switcheroo: enabled
[    2.976256] [TTM] Zone  kernel: Available graphics memory: 7924886 kiB
[    2.976257] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.976258] [TTM] Initializing pool allocator
[    2.976261] [TTM] Initializing DMA pool allocator
[    2.976280] nouveau 0000:06:00.0: DRM: VRAM: 2048 MiB
[    2.976281] nouveau 0000:06:00.0: DRM: GART: 1048576 MiB
[    2.976284] nouveau 0000:06:00.0: DRM: Pointer to TMDS table invalid
[    2.976286] nouveau 0000:06:00.0: DRM: DCB version 4.0
[    3.058081] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.215954] nouveau 0000:06:00.0: DRM: MM: using COPY for buffer copies
[    3.215966] [drm] Initialized nouveau 1.3.1 20120801 for 0000:06:00.0 on minor 0
[    3.216375] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 1
[    3.218563] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.218870] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.218905] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    3.218935] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/LNXVIDEO:01/input/input11
[    3.251447] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[    3.437791] fbcon: inteldrmfb (fb0) is primary device
[    3.804540] [drm] RC6 on
[    4.562020] Console: switching to colour frame buffer device 170x48
[    4.580939] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.668018] raid6: sse2x1   gen()  7590 MB/s
[    4.716013] raid6: sse2x1   xor()  5352 MB/s
[    4.764039] raid6: sse2x2   gen()  8036 MB/s
[    4.812003] raid6: sse2x2   xor()  6644 MB/s
[    4.860011] raid6: sse2x4   gen()  9860 MB/s
[    4.908038] raid6: sse2x4   xor()  6844 MB/s
[    4.956017] raid6: avx2x1   gen() 15124 MB/s
[    5.004005] raid6: avx2x1   xor()  8918 MB/s
[    5.052010] raid6: avx2x2   gen() 17080 MB/s
[    5.100020] raid6: avx2x2   xor() 10476 MB/s
[    5.148008] raid6: avx2x4   gen() 17876 MB/s
[    5.196002] raid6: avx2x4   xor() 14137 MB/s
[    5.196003] raid6: using algorithm avx2x4 gen() 17876 MB/s
[    5.196003] raid6: .... xor() 14137 MB/s, rmw enabled
[    5.196004] raid6: using avx2x2 recovery algorithm
[    5.196344] xor: automatically using best checksumming function   avx       
[    5.196521] async_tx: api initialized (async)
[    5.497129] Btrfs loaded, crc32c=crc32c-intel
[    5.625199] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.759237] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.768861] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.768991] systemd[1]: Detected architecture x86-64.
[    5.769210] systemd[1]: Set hostname to <seven-PC>.
[    5.853151] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.853236] systemd[1]: Listening on udev Kernel Socket.
[    5.853279] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.853310] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.853339] systemd[1]: Listening on udev Control Socket.
[    5.853396] systemd[1]: Listening on Journal Audit Socket.
[    5.853420] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.892723] call_modprobe: parport_lowlevel   2 
[    5.963155] call_modprobe: fs-binfmt_misc   2 
[    5.966487] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    5.967503] lp: driver loaded but no devices found
[    5.979529] call_modprobe: parport_lowlevel   2 
[    5.980398] ppdev: user-space parallel port driver
[    5.982428] bbswitch: loading out-of-tree module taints kernel.
[    5.982602] bbswitch: version 0.8
[    5.982606] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    5.982610] bbswitch: Found discrete VGA device 0000:06:00.0: \_SB_.PCI0.RP09.PEGP
[    5.982679] bbswitch: detected an Optimus _DSM function
[    5.982687] bbswitch: Succesfully loaded. Discrete card 0000:06:00.0 is on
[    5.985283] fuse init (API version 7.26)
[    6.022981] systemd-journald[256]: Received request to flush runtime journal from PID 1
[    6.155986] Adding 4194300k swap on /swapfile.  Priority:-2 extents:9 across:4505596k SSFS
[    6.190966] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.191431] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.255652] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    6.256641] call_modprobe: netdev---all   2 
[    6.257407] call_modprobe: --all   2 
[    6.258035] call_modprobe: netdev---all   2 
[    6.258691] call_modprobe: --all   2 
[    6.259884] ACPI: AC Adapter [AC] (on-line)
[    6.261708] ACPI: Battery Slot [BAT0] (battery absent)
[    6.263983] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    6.266022] Non-volatile memory driver v1.3
[    6.272745] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    6.272747] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.272748] thinkpad_acpi: ThinkPad BIOS R06ET39W (1.13 ), EC unknown
[    6.272748] thinkpad_acpi: Lenovo ThinkPad T460, model 20FNA069CD
[    6.274839] ACPI: Battery Slot [BAT1] (battery present)
[    6.277429] thinkpad_acpi: radio switch found; radios are enabled
[    6.277448] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    6.277449] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    6.281206] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    6.283374] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    6.285057] call_modprobe: crypto-stdrng   2 
[    6.287833] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[    6.296573] call_modprobe: crypto-hmac(sha256)   2 
[    6.297194] call_modprobe: crypto-hmac(sha256)-all   2 
[    6.301188] call_modprobe: crypto-stdrng-all   2 
[    6.343171] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.343174] call_modprobe: i915   2 
[    6.343428] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    6.343572] iTCO_vendor_support: vendor-support=0
[    6.348139] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.348186] Bluetooth: Core ver 2.22
[    6.348207] NET: Registered protocol family 31
[    6.348208] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    6.348208] Bluetooth: HCI device and connection manager initialized
[    6.348215] Bluetooth: HCI socket layer initialized
[    6.348217] Bluetooth: L2CAP socket layer initialized
[    6.348227] Bluetooth: SCO socket layer initialized
[    6.349794] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.354502] Intel(R) Wireless WiFi driver for Linux
[    6.354504] Copyright(c) 2003- 2015 Intel Corporation
[    6.363053] media: Linux media interface: v0.10
[    6.364903] call_modprobe: hdaudio:v10EC0293r00100003a01
                  2 
[    6.364987] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    6.364989] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.364990] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.364991] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.364991] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.364992] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.369835] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-34.ucode (-2)
[    6.369841] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2
[    6.369867] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-33.ucode (-2)
[    6.369870] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
[    6.369881] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-32.ucode (-2)
[    6.369883] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
[    6.369898] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-31.ucode (-2)
[    6.369900] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-31.ucode failed with error -2
[    6.369910] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-30.ucode (-2)
[    6.369912] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2
[    6.369922] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-29.ucode (-2)
[    6.369924] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2
[    6.369934] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-28.ucode (-2)
[    6.369936] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
[    6.369945] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-27.ucode (-2)
[    6.369947] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2
[    6.369957] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-26.ucode (-2)
[    6.369959] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[    6.369968] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-25.ucode (-2)
[    6.369970] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[    6.369980] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-24.ucode (-2)
[    6.369982] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[    6.369992] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-8000C-23.ucode (-2)
[    6.369994] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[    6.371466] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    6.371474] caller snb_uncore_imc_init_box+0x6c/0xb0 [intel_uncore] mapping multiple BARs
[    6.375230] Linux video capture interface: v2.00
[    6.385585] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-8000C-22.ucode
[    6.386148] iwlwifi 0000:04:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    6.386151] call_modprobe: iwlmvm   2 
[    6.390452] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.390455] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.390457] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    6.390458] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.390459] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.390461] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    6.390463] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    6.390464] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.392067] wl: module license 'MIXED/Proprietary' taints kernel.
[    6.392069] Disabling lock debugging due to kernel taint
[    6.404062] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    6.410776] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    6.411087] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    6.417262] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0706)
[    6.427456] uvcvideo 1-10:1.0: Entity type for entity Extension 4 was not initialized!
[    6.427459] uvcvideo 1-10:1.0: Entity type for entity Extension 3 was not initialized!
[    6.427461] uvcvideo 1-10:1.0: Entity type for entity Processing 2 was not initialized!
[    6.427462] uvcvideo 1-10:1.0: Entity type for entity Camera 1 was not initialized!
[    6.427534] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input15
[    6.427656] usbcore: registered new interface driver uvcvideo
[    6.427657] USB Video Class driver (1.1.1)
[    6.436592] call_modprobe: hdaudio:v80862809r00100000a01
                  2 
[    6.453778] kvm: disabled by bios
[    6.454074] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.454443] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    6.454492] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    6.454542] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    6.454584] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    6.454620] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    6.454659] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    6.454919] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    6.454975] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    6.455023] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    6.459005] intel_rapl: Found RAPL domain package
[    6.459007] intel_rapl: Found RAPL domain core
[    6.459008] intel_rapl: Found RAPL domain uncore
[    6.459009] intel_rapl: Found RAPL domain dram
[    6.481815] iwlwifi 0000:04:00.0: base HW address: e4:a4:71:6f:80:74
[    6.552378] random: crng init done
[    6.554450] call_modprobe: crypto-arc4   2 
[    6.556289] call_modprobe: crypto-arc4-all   2 
[    6.556922] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.557139] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.557150] thermal thermal_zone3: failed to read out thermal zone (-61)
[    6.582516] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    6.772020] psmouse serio2: Failed to deactivate mouse on synaptics-pt/serio0
[    7.020407] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.204171] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    7.211855] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    7.236019] psmouse serio2: Failed to enable mouse on synaptics-pt/serio0
[    7.384028] Bluetooth: reset realtek bluetooth device: lock failed with -16
[    7.384032] Bluetooth: reset realtek bluetooth device: failed with -16
[    7.384199] usbcore: registered new interface driver btusb
[    7.385470] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    7.392476] Bluetooth: hci0: Device revision is 5
[    7.392478] Bluetooth: hci0: Secure boot is enabled
[    7.392478] Bluetooth: hci0: OTP lock is enabled
[    7.392479] Bluetooth: hci0: API lock is enabled
[    7.392480] Bluetooth: hci0: Debug lock is disabled
[    7.392481] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    7.392482] request_firmware: intel/ibt-11-5.sfi
[    7.394721] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[    7.394725] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    7.409280] call_modprobe: bt-proto-4   2 
[    7.410970] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.410972] Bluetooth: BNEP filters: protocol multicast
[    7.410976] Bluetooth: BNEP socket layer initialized
[    7.447444] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    7.540434] call_modprobe: netdev-p2p-dev-wlp4s0   2 
[    7.541146] call_modprobe: p2p-dev-wlp4s0   2 
[    7.551441] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    8.142143] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    8.335272] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input25
[    8.888054] Bluetooth: hci0: Waiting for firmware download to complete
[    8.888495] Bluetooth: hci0: Firmware loaded in 1469047 usecs
[    8.888807] Bluetooth: hci0: Waiting for device to boot
[    8.899622] Bluetooth: hci0: Device booted in 10730 usecs
[    8.899981] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[    8.899992] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[    8.900544] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
[    8.948671] call_modprobe: crypto-cmac(aes)   2 
[    8.950984] call_modprobe: crypto-cmac(aes)-all   2 
[    8.953297] call_modprobe: crypto-cmac   2 
[   10.340284] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[   11.705836] wlp4s0: authenticate with 8a:25:93:a4:5e:6a
[   11.721468] wlp4s0: send auth to 8a:25:93:a4:5e:6a (try 1/3)
[   11.730840] wlp4s0: authenticated
[   11.732024] wlp4s0: associate with 8a:25:93:a4:5e:6a (try 1/3)
[   11.736135] wlp4s0: RX AssocResp from 8a:25:93:a4:5e:6a (capab=0x431 status=0 aid=6)
[   11.740334] wlp4s0: associated
[   11.756220] call_modprobe: crypto-ccm(aes)   2 
[   11.759221] call_modprobe: crypto-ccm(aes)-all   2 
[   11.762591] call_modprobe: crypto-ccm   2 
[   11.767247] call_modprobe: crypto-cbcmac(aes)   2 
[   11.769108] call_modprobe: crypto-cbcmac(aes)-all   2 
[   11.770664] call_modprobe: crypto-ctr(aes)   2 
[   11.771787] call_modprobe: crypto-ctr(aes)-all   2 
[   11.773452] call_modprobe: crypto-ctr   2 
[   11.777010] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   12.115034] NET: Registered protocol family 15
[   12.135265] Initializing XFRM netlink socket
[   13.159044] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.159859] Bridge firewalling registered
[   13.167197] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   13.176808] call_modprobe: iptable_filter   2 
[   13.255342] call_modprobe: ipt_addrtype   2 
[   13.257023] call_modprobe: iptable_nat   2 
[   13.258667] call_modprobe: nf_conntrack-2   2 
[   13.361280] Netfilter messages via NETLINK v0.30.
[   13.362663] ctnetlink v0.93: registering with nfnetlink.
[   13.372107] call_modprobe: ipt_MASQUERADE   2 
[   13.544130] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   15.304744] thinkpad_acpi: EC reports that Thermal Table has changed
[   18.093678] call_modprobe: bt-proto-3   2 
[   18.097592] Bluetooth: RFCOMM TTY layer initialized
[   18.097600] Bluetooth: RFCOMM socket layer initialized
[   18.097606] Bluetooth: RFCOMM ver 1.11
[   18.262602] thinkpad_acpi: EC reports that Thermal Table has changed
[   19.272744] input input6: event field not found
[   21.438478] Bluetooth: hci0 advertising data length corrected
[   25.488812] thinkpad_acpi: EC reports that Thermal Table has changed
[   36.257754] Bluetooth: hci0 advertising data length corrected
[   43.196421] Bluetooth: hci0 command 0x200c tx timeout
[   43.196425] Bluetooth: Failed to disable LE scan: status 0x1f
[  315.730480] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  315.730492] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[  315.730606] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 2069.077571] call_modprobe: snd-seq   2 
[ 2069.094250] call_modprobe: snd-seq-client-14   2 
[ 2743.309549] thinkpad_acpi: EC reports that Thermal Table has changed
[ 2744.723289] Bluetooth: hci0 command 0x200c tx timeout
[ 2746.959389] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 2752.287895] thinkpad_acpi: EC reports that Thermal Table has changed
[ 2753.870651] thinkpad_acpi: EC reports that Thermal Table has changed
[ 2754.598742] input input6: event field not found
[ 2754.671678] input input6: event field not found
[ 2761.472009] thinkpad_acpi: EC reports that Thermal Table has changed
[ 2774.716716] wlp4s0: deauthenticating from 8a:25:93:a4:5e:6a by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2774.728198] wlp4s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 2831.295153] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=82873 end=82874) time 145 us, min 763, max 767, scanline start 761, end 769
[ 2944.540422] traps: dde-osd[4680] trap divide error ip:5592b95557c2 sp:7fffaf8ddad0 error:0 in dde-osd[5592b9531000+3d000]
[ 3386.285769] input input6: event field not found
[ 3393.168189] input input6: event field not found
[ 4466.401540] input input6: event field not found
[ 4469.314610] input input6: event field not found
[ 4470.765138] input input6: event field not found
[ 4471.775159] input input6: event field not found
[ 4487.353068] input input6: event field not found
[ 4497.760662] input input6: event field not found
[ 4612.446010] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=189747 end=189748) time 150 us, min 763, max 767, scanline start 761, end 768
[ 4656.977312] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=192419 end=192420) time 157 us, min 763, max 767, scanline start 762, end 770
[ 4684.214410] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe B (start=194032 end=194033) time 165 us, min 894, max 899, scanline start 890, end 900
[ 6794.222857] deepin-cloud-pr[4548]: segfault at 7fc011dd4728 ip 00007fc011e0432d sp 00007ffdb908d500 error 7 in libdxcb.so[7fc011ddb000+4d000]
[ 7001.970538] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 7010.040073] thinkpad_acpi: EC reports that Thermal Table has changed
