[    0.000000] microcode: microcode updated early to revision 0x23, date = 2017-11-20
[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=e2a380f1-09b4-45e5-bc1f-e1a6b8e695cf ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8104fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8105000-0x00000000b810bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b810c000-0x00000000b893bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b893c000-0x00000000b8bedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9636fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9637000-0x00000000c97aafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9f57fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9f58000-0x00000000c9ffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xc9f56998  ACPI 2.0=0xc973f000  ACPI=0xc973f000  SMBIOS=0xf04d0  MPS=0xfd610 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Notebook                         W65_67SJ                        /W65_67SJ powered by premamod.com                        , BIO
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x32fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7F00000000 write-back
[    0.000000]   2 base 0300000000 mask 7FC0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable
[    0.000000]   6 base 00CB000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 0330000000 mask 7FF0000000 uncachable
[    0.000000]   8 base 032FE00000 mask 7FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffffffffff240900]
[    0.000000] esrt: Reserving ESRT space from 0x00000000c9f56998 to 0x00000000c9f569d0.
[    0.000000] Base memory trampoline at [ffff89ea00097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x235809000, 0x235809fff] PGTABLE
[    0.000000] BRK [0x23580a000, 0x23580afff] PGTABLE
[    0.000000] BRK [0x23580b000, 0x23580bfff] PGTABLE
[    0.000000] BRK [0x23580c000, 0x23580cfff] PGTABLE
[    0.000000] BRK [0x23580d000, 0x23580dfff] PGTABLE
[    0.000000] BRK [0x23580e000, 0x23580efff] PGTABLE
[    0.000000] BRK [0x23580f000, 0x23580ffff] PGTABLE
[    0.000000] BRK [0x235810000, 0x235810fff] PGTABLE
[    0.000000] BRK [0x235811000, 0x235811fff] PGTABLE
[    0.000000] BRK [0x235812000, 0x235812fff] PGTABLE
[    0.000000] BRK [0x235813000, 0x235813fff] PGTABLE
[    0.000000] BRK [0x235814000, 0x235814fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x3216a000-0x350acfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C973F000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000C973F088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C97503C0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C973F1B8 011207 (v02 ALASKA A M I    00000034 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000C97AAF80 000040
[    0.000000] ACPI: APIC 0x00000000C97504D0 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000C9750568 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000C97505B0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 0x00000000C9750658 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C97515F0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9751B30 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000C9752608 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C9752648 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C9752680 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9752998 001C4D (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C97545E8 000F2E (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9755518 001C34 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000C9757150 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x32fdf9000-0x32fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000032fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b8104fff]
[    0.000000]   node   0: [mem 0x00000000b810c000-0x00000000b893bfff]
[    0.000000]   node   0: [mem 0x00000000b8bee000-0x00000000c8c0afff]
[    0.000000]   node   0: [mem 0x00000000c910b000-0x00000000c9636fff]
[    0.000000]   node   0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000032fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fdfffff]
[    0.000000] On node 0 totalpages: 3116060
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12794 pages used for memmap
[    0.000000]   DMA32 zone: 818815 pages, LIFO batch:31
[    0.000000]   Normal zone: 35832 pages used for memmap
[    0.000000]   Normal zone: 2293248 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8105000-0xb810bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb893c000-0xb8bedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8c0b000-0xc910afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9637000-0xc97aafff]
[    0.000000] PM: Registered nosave memory: [mem 0xc97ab000-0xc9f57fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9f58000-0xc9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff89ed2fa00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3067346
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-deepin2-amd64 root=UUID=e2a380f1-09b4-45e5-bc1f-e1a6b8e695cf ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 11917700K/12464240K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 546540K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] tsc: Detected 2494.415 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.83 BogoMIPS (lpj=9977660)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.013591] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.014109] Security Framework initialized
[    0.014110] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.014129] AppArmor: AppArmor initialized
[    0.016239] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.017295] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017337] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.017373] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.017531] CPU: Physical Processor ID: 0
[    0.017532] CPU: Processor Core ID: 0
[    0.017536] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.017536] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.017540] mce: CPU supports 9 MCE banks
[    0.017547] CPU0: Thermal monitoring enabled (TM1)
[    0.017558] process: using mwait in idle threads
[    0.017560] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.017561] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.017561] Applying alternatives
[    0.017609] Applying alternatives done
[    0.017610] Applying alternatives smp done
[    0.018111] Freeing SMP alternatives memory: 28K
[    0.025211] smpboot: Max logical packages: 2
[    0.025557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.065254] TSC deadline timer enabled
[    0.065256] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.080019] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.080051] ... version:                3
[    0.080051] ... bit width:              48
[    0.080052] ... generic registers:      4
[    0.080052] ... value mask:             0000ffffffffffff
[    0.080053] ... max period:             00007fffffffffff
[    0.080053] ... fixed-purpose events:   3
[    0.080053] ... event mask:             000000070000000f
[    0.088016] Hierarchical SRCU implementation.
[    0.104160] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.112016] smp: Bringing up secondary CPUs ...
[    0.144034] x86: Booting SMP configuration:
[    0.144036] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.337356] smp: Brought up 1 node, 8 CPUs
[    0.337356] smpboot: Total of 8 processors activated (39910.64 BogoMIPS)
[    0.340327] devtmpfs: initialized
[    0.340327] x86/mm: Memory block size: 128MB
[    0.340796] PM: Registering ACPI NVS region [mem 0xb8105000-0xb810bfff] (28672 bytes)
[    0.340796] PM: Registering ACPI NVS region [mem 0xc9637000-0xc97aafff] (1523712 bytes)
[    0.340796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.340796] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.340796] pinctrl core: initialized pinctrl subsystem
[    0.340796] NET: Registered protocol family 16
[    0.340796] cpuidle: using governor ladder
[    0.340796] cpuidle: using governor menu
[    0.340796] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.340796] ACPI: bus type PCI registered
[    0.340796] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.340796] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.340796] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.340796] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.340796] PCI: Using configuration type 1 for base access
[    0.340796] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.340796] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.340796] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.340796] ACPI: Added _OSI(Module Device)
[    0.340796] ACPI: Added _OSI(Processor Device)
[    0.340796] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.340796] ACPI: Added _OSI(Processor Aggregator Device)
[    0.340796] ACPI: Executed 1 blocks of module-level executable AML code
[    0.346563] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.348085] ACPI: Dynamic OEM Table Load:
[    0.348090] ACPI: SSDT 0xFFFF89ED21753000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.348188] ACPI: Dynamic OEM Table Load:
[    0.348193] ACPI: SSDT 0xFFFF89ED211C9800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.348457] ACPI: Dynamic OEM Table Load:
[    0.348457] ACPI: SSDT 0xFFFF89ED21219000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.349485] ACPI: EC: EC started
[    0.349486] ACPI: EC: interrupt blocked
[    0.349674] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.349674] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.349674] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.349674] ACPI: Interpreter enabled
[    0.349674] ACPI: (supports S0 S3 S4 S5)
[    0.349674] ACPI: Using IOAPIC for interrupt routing
[    0.349674] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.349674] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.358484] ACPI: Power Resource [NVP3] (on)
[    0.358502] ACPI: Power Resource [NVP2] (on)
[    0.359702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.359702] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.359702] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.359702] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.359702] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.359702] PCI host bridge to bus 0000:00
[    0.359702] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.359702] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.359702] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.359702] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.359702] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.359702] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.359702] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.359702] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.359702] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.359702] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.359702] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.359702] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.359702] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.359702] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[    0.359702] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.359702] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[    0.359702] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.359702] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.359702] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[    0.359702] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.359702] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[    0.359702] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.359702] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[    0.359702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.359702] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.359702] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.359702] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.359702] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[    0.359702] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.359702] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.359702] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.359702] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.359702] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.359702] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.359702] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.359702] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.359702] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[    0.359702] pci 0000:00:1f.2: PME# supported from D3hot
[    0.359702] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.359702] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[    0.359702] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.359702] pci 0000:01:00.0: [10de:1391] type 00 class 0x030200
[    0.359702] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.359702] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.359702] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.359702] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.359702] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.376011] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.376013] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.376015] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.376018] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.376076] acpiphp: Slot [1] registered
[    0.376081] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.376187] pci 0000:03:00.0: [14e4:43b1] type 00 class 0x028000
[    0.376222] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
[    0.376236] pci 0000:03:00.0: reg 0x18: [mem 0xf7800000-0xf79fffff 64bit]
[    0.376345] pci 0000:03:00.0: supports D1 D2
[    0.376346] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388054] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.388059] pci 0000:00:1c.2:   bridge window [mem 0xf7800000-0xf7afffff]
[    0.388136] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
[    0.388165] pci 0000:04:00.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff]
[    0.388307] pci 0000:04:00.0: supports D1 D2
[    0.388308] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.388385] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
[    0.388412] pci 0000:04:00.2: reg 0x10: [io  0xd000-0xd0ff]
[    0.388440] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.388457] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.388540] pci 0000:04:00.2: supports D1 D2
[    0.388541] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400023] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.400026] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.400029] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.400034] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.400872] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.400920] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.400967] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.401013] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.401058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.401103] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.401148] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.401193] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.401518] ACPI: EC: interrupt unblocked
[    0.401524] ACPI: EC: event unblocked
[    0.401530] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.401531] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.401610] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.401610] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.401610] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.401610] vgaarb: loaded
[    0.401610] EDAC MC: Ver: 3.0.0
[    0.401610] Registered efivars operations
[    0.412330] PCI: Using ACPI for IRQ routing
[    0.413225] PCI: pci_cache_line_size set to 64 bytes
[    0.413334] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.413335] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.413336] e820: reserve RAM buffer [mem 0xb8105000-0xbbffffff]
[    0.413337] e820: reserve RAM buffer [mem 0xb893c000-0xbbffffff]
[    0.413337] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff]
[    0.413338] e820: reserve RAM buffer [mem 0xc9637000-0xcbffffff]
[    0.413339] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.413340] e820: reserve RAM buffer [mem 0x32fe00000-0x32fffffff]
[    0.413412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.413412] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.414050] clocksource: Switched to clocksource hpet
[    0.418566] VFS: Disk quotas dquot_6.6.0
[    0.418580] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.418662] AppArmor: AppArmor Filesystem Enabled
[    0.418672] pnp: PnP ACPI init
[    0.418732] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.418735] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.418949] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.418950] system 00:01: [io  0xffff] has been reserved
[    0.418951] system 00:01: [io  0xffff] has been reserved
[    0.418952] system 00:01: [io  0xffff] has been reserved
[    0.418953] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.418954] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.418955] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.418956] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.418957] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.418958] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.418959] system 00:01: [io  0x3322-0x3323] has been reserved
[    0.418961] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.418976] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.419009] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.419011] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.419030] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.419079] pnp 00:05: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
[    0.419124] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.419126] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.419429] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.419430] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.419431] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.419432] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.419433] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.419434] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.419435] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.419436] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.419437] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.419438] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.419439] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved
[    0.419440] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[    0.419442] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.419608] pnp: PnP ACPI: found 8 devices
[    0.425397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.425422] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.425423] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.425425] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.425427] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.425429] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.425438] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.425442] pci 0000:00:1c.2:   bridge window [mem 0xf7800000-0xf7afffff]
[    0.425448] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.425450] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.425453] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.425456] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.425462] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.425463] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.425463] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.425464] pci_bus 0000:00: resource 7 [mem 0xcf200000-0xfeafffff window]
[    0.425465] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.425466] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.425467] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.425468] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf7afffff]
[    0.425468] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.425469] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.425470] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.425566] NET: Registered protocol family 2
[    0.425693] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.425827] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.425932] TCP: Hash tables configured (established 131072 bind 65536)
[    0.425963] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.425998] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.426060] NET: Registered protocol family 1
[    0.426070] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.426509] PCI: CLS 64 bytes, default 64
[    0.426535] Unpacking initramfs...
[    0.969762] Freeing initrd memory: 48396K
[    0.969764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.969766] software IO TLB [mem 0xb4105000-0xb8105000] (64MB) mapped at [ffff89eab4105000-ffff89eab8104fff]
[    0.970113] audit: initializing netlink subsys (disabled)
[    0.970166] audit: type=2000 audit(1517928418.968:1): state=initialized audit_enabled=0 res=1
[    0.970393] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.970459] zbud: loaded
[    1.200348] Key type asymmetric registered
[    1.200349] Asymmetric key parser 'x509' registered
[    1.200361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.200391] io scheduler noop registered
[    1.200392] io scheduler deadline registered
[    1.200401] io scheduler cfq registered (default)
[    1.200402] io scheduler mq-deadline registered
[    1.200958] efifb: probing for efifb
[    1.200975] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
[    1.200976] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.200977] efifb: scrolling: redraw
[    1.200978] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.204009] Console: switching to colour frame buffer device 240x67
[    1.206807] fb0: EFI VGA frame buffer device
[    1.206812] intel_idle: disabled
[    1.207058] Monitor-Mwait will be used to enter C-1 state
[    1.207067] Monitor-Mwait will be used to enter C-2 state
[    1.208146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.208447] Linux agpgart interface v0.103
[    1.208488] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.208488] AMD IOMMUv2 functionality not available on this system
[    1.208907] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
[    1.215102] i8042: Detected active multiplexing controller, rev 1.1
[    1.217676] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.217705] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.217719] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.217731] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.217744] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.217807] mousedev: PS/2 mouse device common for all mice
[    1.217837] rtc_cmos 00:02: RTC can wake from S4
[    1.217941] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.217963] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.218096] ledtrig-cpu: registered to indicate activity on CPUs
[    1.218330] NET: Registered protocol family 10
[    1.218525] Segment Routing with IPv6
[    1.218535] mip6: Mobile IPv6
[    1.218536] NET: Registered protocol family 17
[    1.218538] mpls_gso: MPLS GSO support
[    1.219019] microcode: sig=0x306c3, pf=0x10, revision=0x23
[    1.219238] microcode: Microcode Update Driver: v2.2.
[    1.219246] sched_clock: Marking stable (1219235333, 0)->(1230265108, -11029775)
[    1.219506] registered taskstats version 1
[    1.219521] zswap: loaded using pool lzo/zbud
[    1.219601] AppArmor: AppArmor sha1 policy hashing enabled
[    1.219603] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.220108] rtc_cmos 00:02: setting system clock to 2018-02-06 14:46:59 UTC (1517928419)
[    1.221358] Freeing unused kernel memory: 1460K
[    1.221359] Write protecting the kernel read-only data: 16384k
[    1.221379] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.222052] Freeing unused kernel memory: 2012K
[    1.223724] Freeing unused kernel memory: 1036K
[    1.227109] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.227110] x86/mm: Checking user space page tables
[    1.230327] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.263263] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.263286] ACPI: Power Button [PWRB]
[    1.263332] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.263342] ACPI: Sleep Button [SLPB]
[    1.263437] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    1.263480] ACPI: Lid Switch [LID0]
[    1.263543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.263558] ACPI: Power Button [PWRF]
[    1.264592] hidraw: raw HID events driver (C) Jiri Kosina
[    1.266796] sdhci: Secure Digital Host Controller Interface driver
[    1.266797] sdhci: Copyright(c) Pierre Ossman
[    1.270668] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.270716] thermal LNXTHERM:00: registered as thermal_zone0
[    1.270717] ACPI: Thermal Zone [TZ0] (14 C)
[    1.273046] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.273055] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.273058] ACPI: bus type USB registered
[    1.273078] usbcore: registered new interface driver usbfs
[    1.273086] usbcore: registered new interface driver hub
[    1.273112] usbcore: registered new device driver usb
[    1.273844] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.273866] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.273907] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffa47d418cd000, 80:fa:5b:0d:ef:6f, XID 08800800 IRQ 24
[    1.273909] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.276468] SCSI subsystem initialized
[    1.276710] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.276717] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.277314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.277817] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.277824] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.277955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.277956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.277957] usb usb1: Product: xHCI Host Controller
[    1.277958] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.277959] usb usb1: SerialNumber: 0000:00:14.0
[    1.277995] ehci-pci: EHCI PCI platform driver
[    1.278085] hub 1-0:1.0: USB hub found
[    1.278103] hub 1-0:1.0: 14 ports detected
[    1.278512] AVX2 version of gcm_enc/dec engaged.
[    1.278512] AES CTR mode by8 optimization enabled
[    1.279502] libata version 3.00 loaded.
[    1.280348] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.280541] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.280545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.280593] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.280595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.280596] usb usb2: Product: xHCI Host Controller
[    1.280597] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 xhci-hcd
[    1.280598] usb usb2: SerialNumber: 0000:00:14.0
[    1.281271] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.281326] hub 2-0:1.0: USB hub found
[    1.281340] hub 2-0:1.0: 4 ports detected
[    1.281836] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.281841] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.281852] ehci-pci 0000:00:1a.0: debug port 2
[    1.282343] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.282927] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.285483] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.285769] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.285784] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[    1.285985] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.286599] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.287178] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.287851] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.288485] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.289834] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.290314] r8169 0000:04:00.2 enp4s0f2: renamed from eth0
[    1.290471] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.291112] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.291631] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.292161] call_modprobe: crypto-pcbc   2 
[    1.300050] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.300227] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.300229] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300230] usb usb3: Product: EHCI Host Controller
[    1.300231] usb usb3: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.300232] usb usb3: SerialNumber: 0000:00:1a.0
[    1.300397] hub 3-0:1.0: USB hub found
[    1.300425] hub 3-0:1.0: 2 ports detected
[    1.300834] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.300838] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.300849] ehci-pci 0000:00:1d.0: debug port 2
[    1.304747] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.304756] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[    1.320069] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.320123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.320124] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.320125] usb usb4: Product: EHCI Host Controller
[    1.320126] usb usb4: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.320127] usb usb4: SerialNumber: 0000:00:1d.0
[    1.320315] hub 4-0:1.0: USB hub found
[    1.320321] hub 4-0:1.0: 2 ports detected
[    1.320486] ahci 0000:00:1f.2: version 3.0
[    1.320668] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.320697] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
[    1.320698] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst 
[    1.356764] scsi host0: ahci
[    1.357002] scsi host1: ahci
[    1.357173] scsi host2: ahci
[    1.357317] scsi host3: ahci
[    1.357470] scsi host4: ahci
[    1.357591] scsi host5: ahci
[    1.357641] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 27
[    1.357642] ata2: DUMMY
[    1.357645] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 27
[    1.357645] ata4: DUMMY
[    1.357647] ata5: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a300 irq 27
[    1.357649] ata6: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a380 irq 27
[    1.357963] [drm] Memory usable by graphics device = 2048M
[    1.357965] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    1.357966] fb: switching to inteldrmfb from EFI VGA
[    1.357981] Console: switching to colour dummy device 80x25
[    1.358049] [drm] Replacing VGA console driver
[    1.364070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.364071] [drm] Driver supports precise vblank timestamp query.
[    1.366146] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.373979] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.374123] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.374143] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.374314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input11
[    1.374374] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.374522] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[    1.412432] fbcon: inteldrmfb (fb0) is primary device
[    1.616059] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[    1.671452] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.675287] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, CH00, max UDMA/100
[    1.680061] ata1.00: configured for UDMA/100
[    1.685646] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  CH00 PQ: 0 ANSI: 5
[    1.704003] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.704017] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.766593] usb 1-6: New USB device found, idVendor=25a7, idProduct=fa23
[    1.766595] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.766596] usb 1-6: Product: 2.4G Receiver
[    1.766597] usb 1-6: Manufacturer: Compx
[    1.771686] usbcore: registered new interface driver usbhid
[    1.771687] usbhid: USB HID core driver
[    1.772704] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:25A7:FA23.0001/input/input13
[    1.832240] hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-6/input0
[    1.832513] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:25A7:FA23.0002/input/input14
[    1.891979] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.923016] hid-generic 0003:25A7:FA23.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-6/input1
[    1.940773] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[    1.940775] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.940819] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[    1.940820] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.941337] hub 3-1:1.0: USB hub found
[    1.941364] hub 4-1:1.0: USB hub found
[    1.941421] hub 3-1:1.0: 6 ports detected
[    1.941427] hub 4-1:1.0: 8 ports detected
[    2.014748] ata3: SATA link down (SStatus 0 SControl 300)
[    2.034054] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[    2.034060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns
[    2.071227] usb 1-7: New USB device found, idVendor=0a5c, idProduct=21fb
[    2.071228] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.071229] usb 1-7: Product: BCM20702A0
[    2.071230] usb 1-7: Manufacturer: Broadcom Corp
[    2.071231] usb 1-7: SerialNumber: 240A6403AEA9
[    2.194696] psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[    2.195965] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    2.294606] psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
[    2.326367] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.328325] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.328327] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.328329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.328479] ata5.00: ATA-8: LITEON S930 128, V.01, max UDMA/133
[    2.328480] ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.328832] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.328834] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.328835] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.329023] ata5.00: configured for UDMA/133
[    2.329141] scsi 4:0:0:0: Direct-Access     ATA      LITEON S930 128  V.01 PQ: 0 ANSI: 5
[    2.393989] psmouse serio2: elantech: Elan sample query result 03, 4d, 85
[    2.570010] usb 1-8: New USB device found, idVendor=04f2, idProduct=b43b
[    2.570012] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.570013] usb 1-8: Product: Chicony USB 2.0 Camera
[    2.570013] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.570014] usb 1-8: SerialNumber: 0x0001
[    2.642696] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.643884] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.643886] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.643887] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.644994] ata6.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[    2.644995] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.646208] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.646209] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.646211] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.678779] ata6.00: configured for UDMA/133
[    2.678972] scsi 5:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[    2.718147] Console: switching to colour frame buffer device 240x67
[    2.726581] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10
[    2.737882] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.758426] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.758436] sd 4:0:0:0: [sda] Write Protect is off
[    2.758437] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.758446] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.758518] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.758520] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    2.758537] sd 5:0:0:0: [sdb] Write Protect is off
[    2.758539] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.758569] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.761285]  sda: sda1 sda2 sda3 sda4 sda5
[    2.762341] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.779288] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.779290] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.779458] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.842123]  sdb: sdb1 sdb2 sdb3 sdb4
[    2.842952] sd 5:0:0:0: [sdb] Attached SCSI disk
[    3.036231] clocksource: Switched to clocksource tsc
[    3.587966] raid6: sse2x1   gen() 10584 MB/s
[    3.635941] raid6: sse2x1   xor()  8082 MB/s
[    3.683954] raid6: sse2x2   gen() 13652 MB/s
[    3.731943] raid6: sse2x2   xor()  9205 MB/s
[    3.779990] raid6: sse2x4   gen() 15669 MB/s
[    3.827942] raid6: sse2x4   xor() 11067 MB/s
[    3.875941] raid6: avx2x1   gen() 20850 MB/s
[    3.923940] raid6: avx2x1   xor() 15430 MB/s
[    3.971941] raid6: avx2x2   gen() 24364 MB/s
[    4.019941] raid6: avx2x2   xor() 16606 MB/s
[    4.067941] raid6: avx2x4   gen() 28015 MB/s
[    4.115941] raid6: avx2x4   xor() 20106 MB/s
[    4.115942] raid6: using algorithm avx2x4 gen() 28015 MB/s
[    4.115942] raid6: .... xor() 20106 MB/s, rmw enabled
[    4.115943] raid6: using avx2x2 recovery algorithm
[    4.116215] xor: automatically using best checksumming function   avx       
[    4.116344] async_tx: api initialized (async)
[    4.432155] Btrfs loaded, crc32c=crc32c-intel
[    4.938207] PM: Starting manual resume from disk
[    4.938279] PM: Image not found (code -22)
[    5.026402] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.110891] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    5.123717] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.124113] call_modprobe: fs-efivarfs   2 
[    5.153715] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.153861] systemd[1]: Detected architecture x86-64.
[    5.154009] systemd[1]: Set hostname to <iYong-PC>.
[    5.203762] systemd[1]: Listening on udev Kernel Socket.
[    5.203820] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.203844] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.203879] systemd[1]: Listening on Journal Socket.
[    5.203907] systemd[1]: Listening on udev Control Socket.
[    5.203966] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.204038] systemd[1]: Listening on Journal Audit Socket.
[    5.215127] call_modprobe: fs-binfmt_misc   2 
[    5.216228] call_modprobe: parport_lowlevel   2 
[    5.233884] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    5.236309] lp: driver loaded but no devices found
[    5.237269] call_modprobe: parport_lowlevel   2 
[    5.237806] ppdev: user-space parallel port driver
[    5.242941] fuse init (API version 7.26)
[    5.248997] systemd-journald[354]: Received request to flush runtime journal from PID 1
[    5.322706] ACPI: AC Adapter [AC] (on-line)
[    5.341922] ACPI: Battery Slot [BAT0] (battery present)
[    5.357546] random: crng init done
[    5.360229] EDAC ie31200: No ECC support
[    5.360394] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[    5.360400] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.360403] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    5.360408] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[    5.360412] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.360413] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    5.360416] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    5.360419] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[    5.360422] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.360423] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    5.360426] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    5.360429] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
[    5.360432] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.360433] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.360651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.361026] input: PC Speaker as /devices/platform/pcspkr/input/input17
[    5.361501] EFI Variables Facility v0.08 2004-May-17
[    5.363569] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    5.363619] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    5.363665] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    5.369847] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    5.369977] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.369979] call_modprobe: i915   2 
[    5.370061] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    5.377223] media: Linux media interface: v0.10
[    5.377665] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.377666] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.377666] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.377667] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.377667] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.381563] pstore: using zlib compression
[    5.381576] pstore: Registered efi as persistent store backend
[    5.382814] call_modprobe: crypto-stdrng   2 
[    5.383340] call_modprobe: hdaudio:v11068446r00100000a01
                  2 
[    5.384205] Linux video capture interface: v2.00
[    5.386526] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    5.387709] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    5.388012] call_modprobe: hdaudio:v80862807r00100000a01
                  2 
[    5.388676] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[    5.388678] snd_hda_codec_via hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.388680] snd_hda_codec_via hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[    5.388681] snd_hda_codec_via hdaudioC1D0:    mono: mono_out=0x0
[    5.388683] snd_hda_codec_via hdaudioC1D0:    inputs:
[    5.388684] snd_hda_codec_via hdaudioC1D0:      Internal Mic=0x30
[    5.388686] snd_hda_codec_via hdaudioC1D0:      Mic=0x2b
[    5.390804] call_modprobe: crypto-hmac(sha256)   2 
[    5.391438] call_modprobe: crypto-hmac(sha256)-all   2 
[    5.393407] call_modprobe: crypto-stdrng-all   2 
[    5.393752] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    5.393819] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    5.393871] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[    5.393924] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[    5.393977] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    5.394181] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b43b)
[    5.395531] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    5.396165] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[    5.396224] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[    5.399079] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[    5.399081] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[    5.399082] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[    5.399147] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input26
[    5.399211] usbcore: registered new interface driver uvcvideo
[    5.399212] USB Video Class driver (1.1.1)
[    5.414812] Bluetooth: Core ver 2.22
[    5.414821] NET: Registered protocol family 31
[    5.414822] Bluetooth: HCI device and connection manager initialized
[    5.414824] Bluetooth: HCI socket layer initialized
[    5.414826] Bluetooth: L2CAP socket layer initialized
[    5.414830] Bluetooth: SCO socket layer initialized
[    5.423037] intel_rapl: Found RAPL domain package
[    5.423039] intel_rapl: Found RAPL domain core
[    5.423039] intel_rapl: Found RAPL domain uncore
[    5.423040] intel_rapl: Found RAPL domain dram
[    5.425479] iTCO_vendor_support: vendor-support=0
[    5.425923] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.425961] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    5.426049] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.513176] Adding 3004412k swap on /dev/sda5.  Priority:-2 extents:1 across:3004412k SSFS
[    5.543090] call_modprobe: fs-vfat   2 
[    5.547313] call_modprobe: nls_cp437   2 
[    5.548556] call_modprobe: nls_ascii   2 
[    6.432024] Bluetooth: reset realtek bluetooth device: lock failed with -16
[    6.432028] Bluetooth: reset realtek bluetooth device: failed with -16
[    6.432287] usbcore: registered new interface driver btusb
[    6.542087] Bluetooth: hci0: BCM: chip id 63
[    6.543083] Bluetooth: hci0: BCM: features 0x07
[    6.543169] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[    6.559085] Bluetooth: hci0: iYong-PC
[    6.560079] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1766
[    6.560081] request_firmware: brcm/BCM20702A1-0a5c-21fb.hcd
[    6.561439] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21fb.hcd
[    6.585094] call_modprobe: netdev---all   2 
[    6.586132] call_modprobe: --all   2 
[    6.587146] call_modprobe: netdev---all   2 
[    6.588266] call_modprobe: --all   2 
[    6.629286] call_modprobe: char-major-10-200   2 
[    6.631541] tun: Universal TUN/TAP device driver, 1.6
[    6.640679] IPv6: ADDRCONF(NETDEV_UP): edge0: link is not ready
[    6.643498] device edge0 entered promiscuous mode
[    6.843728] call_modprobe: bt-proto-4   2 
[    6.846407] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.846409] Bluetooth: BNEP filters: protocol multicast
[    6.846412] Bluetooth: BNEP socket layer initialized
[    7.051556] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[    7.051692] request_firmware: rtl_nic/rtl8411-1.fw
[    7.053184] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[    7.126867] r8169 0000:04:00.2 enp4s0f2: link down
[    7.126869] r8169 0000:04:00.2 enp4s0f2: link down
[    7.126927] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[    7.305165] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1648
[    7.321165] Bluetooth: hci0: DW1550 Bluetooth 4.0 LE
[    7.380627] call_modprobe: crypto-cmac(aes)   2 
[    7.381831] call_modprobe: crypto-cmac(aes)-all   2 
[    7.382774] call_modprobe: crypto-cmac   2 
[   12.022679] r8169 0000:04:00.2 enp4s0f2: link up
[   12.022687] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f2: link becomes ready
[   12.066872] NET: Registered protocol family 15
[   12.079081] Initializing XFRM netlink socket
[   16.202103] call_modprobe: bt-proto-3   2 
[   16.204744] Bluetooth: RFCOMM TTY layer initialized
[   16.204750] Bluetooth: RFCOMM socket layer initialized
[   16.204755] Bluetooth: RFCOMM ver 1.11
[   17.790499] call_modprobe: net-pf-16-proto-16-family-nl80211   2 
[ 2295.948510] call_modprobe: fs-   2 
[ 2299.171581] rtsx_pci 0000:04:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[ 2299.178059] r8169 0000:04:00.2: invalid short VPD tag 00 at offset 1
