[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz root=LABEL=SYSX modules=sd-mod,usb-storage,ext4 intel_pstate=enable
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000bad86fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bad87000-0x00000000badbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000badbf000-0x00000000badc7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badc8000-0x00000000baefefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
[    0.000000] efi:  ACPI=0xbaffe000  ACPI 2.0=0xbaffe014  SMBIOS=0xbae87000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO HuronRiver Platform/Emerald Lake, BIOS 43CN45WW 02/16/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffffa04180097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x17ce09000, 0x17ce09fff] PGTABLE
[    0.000000] BRK [0x17ce0a000, 0x17ce0afff] PGTABLE
[    0.000000] BRK [0x17ce0b000, 0x17ce0bfff] PGTABLE
[    0.000000] BRK [0x17ce0c000, 0x17ce0cfff] PGTABLE
[    0.000000] BRK [0x17ce0d000, 0x17ce0dfff] PGTABLE
[    0.000000] BRK [0x17ce0e000, 0x17ce0efff] PGTABLE
[    0.000000] BRK [0x17ce0f000, 0x17ce0ffff] PGTABLE
[    0.000000] BRK [0x17ce10000, 0x17ce10fff] PGTABLE
[    0.000000] BRK [0x17ce11000, 0x17ce11fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x31ebf000-0x34f56fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BAFFE120 00008C (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: FACP 0x00000000BAFEE000 0000F4 (v03 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: DSDT 0x00000000BAFF1000 009AF8 (v02 LENOVO SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF3D000 000040
[    0.000000] ACPI: FACS 0x00000000BAF3D000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFB000 001068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFEA000 000954 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE9000 0007C2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE8000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE5000 000242 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fdf7000-0x23fdfbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bac86fff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.000000] On node 0 totalpages: 2075174
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1182 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11891 pages used for memmap
[    0.000000]   DMA32 zone: 760968 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1310208 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbac87000-0xbad86fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad87000-0xbadbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadbf000-0xbadc7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadc8000-0xbaefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaeff000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba00000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffffa043bfa00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2041565
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=LABEL=SYSX modules=sd-mod,usb-storage,ext4 intel_pstate=enable
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7959712K/8300696K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 340984K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.308 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.61 BogoMIPS (lpj=9977232)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.014302] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.014716] Security Framework initialized
[    0.014720] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.014747] AppArmor: AppArmor initialized
[    0.015946] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.016599] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016644] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016666] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016874] Disabled fast string operations
[    0.016879] CPU: Physical Processor ID: 0
[    0.016881] CPU: Processor Core ID: 0
[    0.016888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016890] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016896] mce: CPU supports 7 MCE banks
[    0.016905] CPU0: Thermal monitoring enabled (TM1)
[    0.016914] process: using mwait in idle threads
[    0.016919] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.016921] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.016924] Applying alternatives
[    0.016980] Applying alternatives done
[    0.016982] Applying alternatives smp done
[    0.017021] Freeing SMP alternatives memory: 28K
[    0.019792] smpboot: Max logical packages: 4
[    0.019869] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.020346] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060049] TSC deadline timer enabled
[    0.060052] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.076026] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.076099] ... version:                3
[    0.076113] ... bit width:              48
[    0.076114] ... generic registers:      4
[    0.076116] ... value mask:             0000ffffffffffff
[    0.076119] ... max period:             00007fffffffffff
[    0.076121] ... fixed-purpose events:   3
[    0.076123] ... event mask:             000000070000000f
[    0.084010] Hierarchical SRCU implementation.
[    0.100296] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.108008] smp: Bringing up secondary CPUs ...
[    0.140083] x86: Booting SMP configuration:
[    0.140093] .... node  #0, CPUs:      #1
[    0.004000] Disabled fast string operations
[    0.172092]  #2
[    0.004000] Disabled fast string operations
[    0.204083]  #3
[    0.004000] Disabled fast string operations
[    0.206811] smp: Brought up 1 node, 4 CPUs
[    0.206811] smpboot: Total of 4 processors activated (19954.46 BogoMIPS)
[    0.208318] devtmpfs: initialized
[    0.208318] x86/mm: Memory block size: 128MB
[    0.208801] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.208801] PM: Registering ACPI NVS region [mem 0xbadbf000-0xbadc7fff] (36864 bytes)
[    0.208801] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff] (655360 bytes)
[    0.208801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.208801] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.208801] pinctrl core: initialized pinctrl subsystem
[    0.208801] NET: Registered protocol family 16
[    0.208801] cpuidle: using governor ladder
[    0.212034] cpuidle: using governor menu
[    0.212091] ACPI: bus type PCI registered
[    0.212094] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.212156] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.212166] PCI: not using MMCONFIG
[    0.212166] PCI: Using configuration type 1 for base access
[    0.212168] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.212809] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.212809] ACPI: Added _OSI(Module Device)
[    0.212809] ACPI: Added _OSI(Processor Device)
[    0.212809] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.212809] ACPI: Added _OSI(Processor Aggregator Device)
[    0.212809] ACPI: Executed 1 blocks of module-level executable AML code
[    0.217914] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.218261] ACPI: Dynamic OEM Table Load:
[    0.218271] ACPI: SSDT 0xFFFFA043B5DBC800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.218579] ACPI: Dynamic OEM Table Load:
[    0.218586] ACPI: SSDT 0xFFFFA043B5E28400 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.218811] ACPI: Dynamic OEM Table Load:
[    0.218817] ACPI: SSDT 0xFFFFA043B5E29800 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.219542] ACPI: EC: EC started
[    0.219545] ACPI: EC: interrupt blocked
[    0.221345] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.221350] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.221353] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.221356] ACPI: Interpreter enabled
[    0.221381] ACPI: (supports S0 S1 S3 S4 S5)
[    0.221383] ACPI: Using IOAPIC for interrupt routing
[    0.221408] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.221853] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.221865] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.222113] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.229181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.229189] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.229228] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.229704] PCI host bridge to bus 0000:00
[    0.229709] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.229712] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.229715] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.229719] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.229722] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.229726] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.229735] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.229824] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.229856] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.229934] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.229944] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.229949] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.229952] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.229963] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.230089] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.230114] pci 0000:00:16.0: reg 0x10: [mem 0xf1605000-0xf160500f 64bit]
[    0.230189] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.230270] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.230292] pci 0000:00:1a.0: reg 0x10: [mem 0xf1609000-0xf16093ff]
[    0.230375] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.230453] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.230474] pci 0000:00:1b.0: reg 0x10: [mem 0xf1600000-0xf1603fff 64bit]
[    0.230547] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.230631] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.230708] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.230792] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.230874] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.230957] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.231039] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.231124] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.231146] pci 0000:00:1d.0: reg 0x10: [mem 0xf1608000-0xf16083ff]
[    0.231229] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.231307] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.231480] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.231497] pci 0000:00:1f.2: reg 0x10: [io  0x40b8-0x40bf]
[    0.231504] pci 0000:00:1f.2: reg 0x14: [io  0x40cc-0x40cf]
[    0.231511] pci 0000:00:1f.2: reg 0x18: [io  0x40b0-0x40b7]
[    0.231519] pci 0000:00:1f.2: reg 0x1c: [io  0x40c8-0x40cb]
[    0.231526] pci 0000:00:1f.2: reg 0x20: [io  0x4090-0x409f]
[    0.231534] pci 0000:00:1f.2: reg 0x24: [io  0x4080-0x408f]
[    0.231629] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.231648] pci 0000:00:1f.3: reg 0x10: [mem 0xf1604000-0xf16040ff 64bit]
[    0.231668] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.231757] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.231774] pci 0000:00:1f.5: reg 0x10: [io  0x40a8-0x40af]
[    0.231781] pci 0000:00:1f.5: reg 0x14: [io  0x40c4-0x40c7]
[    0.231789] pci 0000:00:1f.5: reg 0x18: [io  0x40a0-0x40a7]
[    0.231796] pci 0000:00:1f.5: reg 0x1c: [io  0x40c0-0x40c3]
[    0.231803] pci 0000:00:1f.5: reg 0x20: [io  0x4070-0x407f]
[    0.231811] pci 0000:00:1f.5: reg 0x24: [io  0x4060-0x406f]
[    0.231944] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
[    0.231958] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.231966] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.231973] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.231978] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.231983] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.231988] pci 0000:01:00.0: enabling Extended Tags
[    0.244034] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.244048] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.244054] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.244061] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.244149] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.244376] pci 0000:03:00.0: [8086:0084] type 00 class 0x028000
[    0.244588] pci 0000:03:00.0: reg 0x10: [mem 0xf1500000-0xf1501fff 64bit]
[    0.245320] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.256163] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.256171] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.256301] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.256402] pci 0000:04:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.256521] pci 0000:04:00.0: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[    0.256594] pci 0000:04:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[    0.256987] pci 0000:04:00.0: supports D1 D2
[    0.256988] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268084] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.268099] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.268120] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.268622] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.268683] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268742] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268800] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268857] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268914] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268971] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.269028] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.269227] ACPI: EC: interrupt unblocked
[    0.269236] ACPI: EC: event unblocked
[    0.269243] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.269247] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.269348] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.269348] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.269348] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.269348] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.269348] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.269348] vgaarb: loaded
[    0.269348] EDAC MC: Ver: 3.0.0
[    0.269348] Registered efivars operations
[    0.284015] PCI: Using ACPI for IRQ routing
[    0.285348] PCI: pci_cache_line_size set to 64 bytes
[    0.285450] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.285452] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff]
[    0.285453] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.285454] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.285559] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.285559] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.288002] clocksource: Switched to clocksource hpet
[    0.296884] VFS: Disk quotas dquot_6.6.0
[    0.296913] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.297020] AppArmor: AppArmor Filesystem Enabled
[    0.297040] pnp: PnP ACPI init
[    0.297189] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.297194] system 00:00: [io  0xffff] has been reserved
[    0.297197] system 00:00: [io  0xffff] has been reserved
[    0.297200] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.297203] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.297206] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.297210] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.297216] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297243] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.297294] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.297300] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.297375] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.297396] pnp 00:04: Plug and Play ACPI device, IDs SYN032a SYN0300 SYN0002 PNP0f13 (active)
[    0.297511] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297515] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.297518] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.297521] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.297524] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.297528] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.297531] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.297534] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.297537] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.297540] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.297543] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.297548] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297764] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.297768] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.297773] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.297791] pnp: PnP ACPI: found 7 devices
[    0.304061] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.304069] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.304105] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.304108] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.304112] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.304115] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.304120] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.304123] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.304129] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.304141] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.304147] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.304157] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.304161] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.304170] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.304179] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.304180] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.304181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.304182] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.304184] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.304185] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.304186] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.304187] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.304188] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.304189] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.304191] pci_bus 0000:04: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.304285] NET: Registered protocol family 2
[    0.304452] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.304586] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.304708] TCP: Hash tables configured (established 65536 bind 65536)
[    0.304758] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304787] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304858] NET: Registered protocol family 1
[    0.304876] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.305299] PCI: CLS 64 bytes, default 64
[    0.305345] Unpacking initramfs...
[    1.099888] Freeing initrd memory: 49760K
[    1.099896] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.099900] software IO TLB [mem 0xafe58000-0xb3e58000] (64MB) mapped at [ffffa0422fe58000-ffffa04233e57fff]
[    1.100367] audit: initializing netlink subsys (disabled)
[    1.100436] audit: type=2000 audit(1516883876.100:1): state=initialized audit_enabled=0 res=1
[    1.100744] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.100789] zbud: loaded
[    1.474237] Key type asymmetric registered
[    1.474241] Asymmetric key parser 'x509' registered
[    1.474263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.474307] io scheduler noop registered
[    1.474311] io scheduler deadline registered
[    1.474329] io scheduler cfq registered (default)
[    1.474332] io scheduler mq-deadline registered
[    1.474951] efifb: probing for efifb
[    1.474965] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    1.474968] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.474971] efifb: scrolling: redraw
[    1.474973] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.476744] Console: switching to colour frame buffer device 128x48
[    1.478425] fb0: EFI VGA frame buffer device
[    1.478451] intel_idle: disabled
[    1.479570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.480027] Linux agpgart interface v0.103
[    1.480099] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.480122] AMD IOMMUv2 functionality not available on this system
[    1.480442] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.483113] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.483161] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.483285] mousedev: PS/2 mouse device common for all mice
[    1.483345] rtc_cmos 00:01: RTC can wake from S4
[    1.483495] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.483544] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.483581] intel_pstate: Intel P-state driver initializing
[    1.483933] ledtrig-cpu: registered to indicate activity on CPUs
[    1.485129] NET: Registered protocol family 10
[    1.485797] Segment Routing with IPv6
[    1.485884] mip6: Mobile IPv6
[    1.485925] NET: Registered protocol family 17
[    1.485983] mpls_gso: MPLS GSO support
[    1.486720] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.487054] microcode: Microcode Update Driver: v2.2.
[    1.487078] sched_clock: Marking stable (1487034039, 0)->(1482687017, 4347022)
[    1.487890] registered taskstats version 1
[    1.490414] zswap: loaded using pool lzo/zbud
[    1.493132] AppArmor: AppArmor sha1 policy hashing enabled
[    1.495586] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.496756] rtc_cmos 00:01: setting system clock to 2018-01-25 12:37:56 UTC (1516883876)
[    1.499276] Freeing unused kernel memory: 1460K
[    1.499961] Write protecting the kernel read-only data: 16384k
[    1.501272] Freeing unused kernel memory: 2012K
[    1.502723] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.504870] Freeing unused kernel memory: 1036K
[    1.510732] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.511431] x86/mm: Checking user space page tables
[    1.516914] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.584332] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.584334] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.584336] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.584348] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.584349] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.585355] CPU3: Core temperature/speed normal
[    1.585356] CPU3: Package temperature/speed normal
[    1.585370] CPU0: Package temperature/speed normal
[    1.585371] CPU1: Package temperature/speed normal
[    1.590536] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.633669] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.634926] ACPI: Lid Switch [LID0]
[    1.636127] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.637305] ACPI: Sleep Button [SLPB]
[    1.638544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.639731] ACPI: Power Button [PWRF]
[    1.657564] ACPI: bus type USB registered
[    1.659852] SCSI subsystem initialized
[    1.661457] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.665611] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.665625] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.666443] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc0e9c0c8d000, f0:de:f1:e9:4a:0b, XID 0c200000 IRQ 24
[    1.666445] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.669817] libata version 3.00 loaded.
[    1.673359] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.673827] thermal LNXTHERM:00: registered as thermal_zone0
[    1.673829] ACPI: Thermal Zone [TZS0] (92 C)
[    1.674194] thermal LNXTHERM:01: registered as thermal_zone1
[    1.674195] ACPI: Thermal Zone [TZS1] (50 C)
[    1.686648] usbcore: registered new interface driver usbfs
[    1.688397] usbcore: registered new interface driver hub
[    1.690286] usbcore: registered new device driver usb
[    1.690395] ata_piix 0000:00:1f.2: version 2.13
[    1.690562] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.696019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.698563] ehci-pci: EHCI PCI platform driver
[    1.700301] AVX version of gcm_enc/dec engaged.
[    1.700302] AES CTR mode by8 optimization enabled
[    1.704147] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.717601] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.722550] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.726519] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.728693] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.730627] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.732296] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.734252] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.735876] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.738054] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.739686] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.742194] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.744506] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.746974] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.749347] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.751665] call_modprobe: crypto-pcbc   2 
[    1.754983] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.757125] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    1.759668] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    1.849199] scsi host0: ata_piix
[    1.851961] scsi host1: ata_piix
[    1.854390] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
[    1.856726] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
[    1.859356] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.862376] scsi host2: ata_piix
[    1.864807] scsi host3: ata_piix
[    1.866977] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
[    1.869116] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
[    1.870048] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.872128] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.874268] ehci-pci 0000:00:1a.0: debug port 2
[    1.880258] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.880273] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1609000
[    1.896148] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.897417] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.898555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.899655] usb usb1: Product: EHCI Host Controller
[    1.900762] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.901859] usb usb1: SerialNumber: 0000:00:1a.0
[    1.903359] hub 1-0:1.0: USB hub found
[    1.904474] hub 1-0:1.0: 2 ports detected
[    1.905985] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.907086] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.908236] ehci-pci 0000:00:1d.0: debug port 2
[    1.912759] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.912770] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1608000
[    1.928133] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.929069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.929939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.930810] usb usb2: Product: EHCI Host Controller
[    1.931669] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.932565] usb usb2: SerialNumber: 0000:00:1d.0
[    1.933808] hub 2-0:1.0: USB hub found
[    1.934684] hub 2-0:1.0: 2 ports detected
[    1.936828] [drm] Memory usable by graphics device = 2048M
[    1.938254] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    1.938256] fb: switching to inteldrmfb from EFI VGA
[    1.939367] Console: switching to colour dummy device 80x25
[    1.939485] [drm] Replacing VGA console driver
[    1.945868] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.945877] [drm] Driver supports precise vblank timestamp query.
[    1.948612] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.995276] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.995934] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.996458] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6
[    1.997494] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.001836] acpi device:3f: registered as cooling_device4
[    2.002079] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    2.027709] fbcon: inteldrmfb (fb0) is primary device
[    2.108070] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.108092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    2.195782] ata4: SATA link down (SStatus 0 SControl 300)
[    2.240103] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.268091] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.340189] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.350209] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    2.368752] ata3.00: ATA-8: TOSHIBA MQ01ABD100, AX101U, max UDMA/100
[    2.368757] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.374155] ata3.00: configured for UDMA/100
[    2.396891] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.396896] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.397582] hub 1-1:1.0: USB hub found
[    2.397782] hub 1-1:1.0: 6 ports detected
[    2.403017] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    2.428888] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.428893] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.429578] hub 2-1:1.0: USB hub found
[    2.429772] hub 2-1:1.0: 6 ports detected
[    2.437015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.684135] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    2.716143] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.797507] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00cb
[    2.797512] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.797515] usb 1-1.2: Product: Microsoft USB Optical Mouse
[    2.797518] usb 1-1.2: Manufacturer: PixArt
[    2.804902] hidraw: raw HID events driver (C) Jiri Kosina
[    2.808971] usbcore: registered new interface driver usbhid
[    2.808973] usbhid: USB HID core driver
[    2.812067] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00CB.0001/input/input8
[    2.812304] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.827200] usb 2-1.3: New USB device found, idVendor=1c7a, idProduct=0603
[    2.827205] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.827208] usb 2-1.3: Product: EgisTec_ES603
[    2.827211] usb 2-1.3: Manufacturer: EgisTec
[    2.876125] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    2.900181] ata2.00: failed to resume link (SControl 0)
[    2.908140] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[    2.945879] Console: switching to colour frame buffer device 170x48
[    2.987387] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.025608] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e00d
[    3.028791] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.031894] usb 2-1.4: Product: Broadcom Bluetooth 2.1 Device
[    3.034981] usb 2-1.4: Manufacturer: Broadcom Corp
[    3.036066] usb 2-1.4: SerialNumber: C01885EBD4E4
[    3.094798] usb 1-1.5: New USB device found, idVendor=5986, idProduct=0364
[    3.097559] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.100583] usb 1-1.5: Product: Lenovo EasyCamera
[    3.103565] usb 1-1.5: Manufacturer: Bison Electronics Inc.
[    3.116151] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[    3.132394] clocksource: Switched to clocksource tsc
[    3.227458] ata2.00: SATA link down (SStatus 4 SControl 0)
[    3.228902] ata2.01: SATA link down (SStatus 0 SControl 300)
[    3.229736] ata1.01: failed to resume link (SControl 0)
[    3.230261] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139
[    3.230263] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.230264] usb 2-1.6: Product: USB2.0-CRW
[    3.230264] usb 2-1.6: Manufacturer: Generic
[    3.230265] usb 2-1.6: SerialNumber: 20100201396000000
[    3.239894] usbcore: registered new interface driver rtsx_usb
[    3.396223] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.399136] ata1.01: SATA link down (SStatus 4 SControl 0)
[    3.425415] ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
[    3.428204] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.452861] ata1.00: configured for UDMA/133
[    3.456102] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 1A03 PQ: 0 ANSI: 5
[    3.459823] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1U   PQ: 0 ANSI: 5
[    3.469876] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.471167] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.471180] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.471182] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    3.471209] sd 2:0:0:0: [sdb] Write Protect is off
[    3.471210] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.471236] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.476459] sd 0:0:0:0: [sda] Write Protect is off
[    3.477210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.477222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.548734]  sdb: sdb1 sdb2 sdb3
[    3.551069] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.562121]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    3.565806] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.776029] raid6: sse2x1   gen()  7975 MB/s
[    4.824016] raid6: sse2x1   xor()  5543 MB/s
[    4.872024] raid6: sse2x2   gen()  8581 MB/s
[    4.920044] raid6: sse2x2   xor()  6238 MB/s
[    4.968011] raid6: sse2x4   gen() 10430 MB/s
[    5.016011] raid6: sse2x4   xor()  8598 MB/s
[    5.016688] raid6: using algorithm sse2x4 gen() 10430 MB/s
[    5.017364] raid6: .... xor() 8598 MB/s, rmw enabled
[    5.018037] raid6: using ssse3x2 recovery algorithm
[    5.018995] xor: automatically using best checksumming function   avx       
[    5.020056] async_tx: api initialized (async)
[    5.057994] Btrfs loaded, crc32c=crc32c-intel
[    5.487739] random: crng init done
[   38.051010] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   39.754570] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.755959] call_modprobe: fs-efivarfs   2 
[   40.081304] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   40.083250] systemd[1]: Detected architecture x86-64.
[   40.158303] systemd[1]: Set hostname to <duanyao-laptop>.
[   42.810122] systemd[1]: Listening on Journal Socket.
[   42.813749] systemd[1]: Listening on LVM2 metadata daemon socket.
[   42.817091] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   42.823366] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   42.828353] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   42.830613] systemd[1]: Listening on udev Control Socket.
[   42.831555] systemd[1]: Listening on Journal Socket (/dev/log).
[   43.174692] call_modprobe: parport_lowlevel   2 
[   43.466143] lp: driver loaded but no devices found
[   43.662502] call_modprobe: parport_lowlevel   2 
[   43.664876] ppdev: user-space parallel port driver
[   43.950567] fuse init (API version 7.26)
[   44.349309] Unsafe core_pattern used with fs.suid_dumpable=2.
               Pipe handler or fully qualified core dump path required.
               Set kernel.core_pattern before fs.suid_dumpable.
[   44.769155] call_modprobe: fs-binfmt_misc   2 
[   45.296706] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[   45.498497] systemd-journald[546]: Received request to flush runtime journal from PID 1
[   46.472529] acer_wmi: Acer Laptop ACPI-WMI Extras
[   46.473775] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[   46.834133] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[   46.835686] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   46.836506] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   46.838156] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   46.839907] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   46.840843] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   46.846699] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   46.850522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   46.852502] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   46.856561] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   46.860427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   46.862267] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   46.865449] ACPI: Battery Slot [BAT0] (battery present)
[   46.888253] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[   47.158476] ACPI: AC Adapter [ADP1] (on-line)
[   47.160689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   47.386408] call_modprobe: char-major-10-237   2 
[   47.386409] call_modprobe: char-major-10-237   2 
[   47.386410] call_modprobe: char-major-10-237   2 
[   47.386410] call_modprobe: char-major-10-237   2 
[   47.386906] call_modprobe: char-major-10-237   2 
[   47.580820] iwlwifi: unknown parameter 'auto_agg' ignored
[   47.582037] Intel(R) Wireless WiFi driver for Linux
[   47.583180] Copyright(c) 2003- 2015 Intel Corporation
[   47.584524] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   47.782663] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-1000-5.ucode
[   47.784237] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[   47.785630] call_modprobe: iwldvm   2 
[   47.917604] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   47.918774] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   47.919906] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   47.921034] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   47.962314] call_modprobe: crypto-arc4   2 
[   47.962675] loop: module loaded
[   47.988073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   47.989918] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   48.180899] call_modprobe: crypto-arc4-all   2 
[   48.184090] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   48.348438] call_modprobe: fs-squashfs   2 
[   48.368150] call_modprobe: fs-squashfs   2 
[   48.395734] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   48.476676] Dev loop3: unable to read RDB block 8
[   48.477532]  loop3: unable to read partition table
[   48.478339] loop3: partition table beyond EOD, truncated
[   48.479125] loop_reread_partitions: partition scan of loop3 () failed (rc=-5)
[   48.668188] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   48.669280] call_modprobe: i915   2 
[   48.791781] call_modprobe: hdaudio:v10EC0272r00100001a01
                  2 
[   49.112661] wl: loading out-of-tree module taints kernel.
[   49.113353] wl: module license 'MIXED/Proprietary' taints kernel.
[   49.114009] Disabling lock debugging due to kernel taint
[   49.142159] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   49.142859] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   49.143527] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   49.144213] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   49.144870] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   49.145513] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   49.146144] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   49.154010] call_modprobe: hdaudio:v80862805r00100000a01
                  2 
[   49.207011] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   49.207929] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   49.208687] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   49.209446] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   49.744589] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   49.819542] EFI Variables Facility v0.08 2004-May-17
[   49.883856] pstore: using zlib compression
[   49.892176] pstore: Registered efi as persistent store backend
[   50.074325] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   50.075521] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   50.076697] RAPL PMU: hw unit of domain package 2^-16 Joules
[   50.078176] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   50.276978] media: Linux media interface: v0.10
[   50.524706] Linux video capture interface: v2.00
[   50.905515] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0364)
[   50.922836] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[   50.923662] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[   50.923663] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   50.923740] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
[   50.923806] usbcore: registered new interface driver uvcvideo
[   50.923807] USB Video Class driver (1.1.1)
[   52.111930] call_modprobe: crypto-stdrng   2 
[   53.598191] call_modprobe: crypto-hmac(sha256)   2 
[   53.603103] call_modprobe: crypto-hmac(sha256)-all   2 
[   53.609103] call_modprobe: crypto-stdrng-all   2 
[   53.643036] iTCO_vendor_support: vendor-support=0
[   53.781865] Bluetooth: Core ver 2.22
[   53.784409] NET: Registered protocol family 31
[   53.786928] Bluetooth: HCI device and connection manager initialized
[   53.787756] Bluetooth: HCI socket layer initialized
[   53.788719] Bluetooth: L2CAP socket layer initialized
[   53.789457] Bluetooth: SCO socket layer initialized
[   54.465605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   54.467139] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   54.467200] intel_rapl: Found RAPL domain package
[   54.467201] intel_rapl: Found RAPL domain core
[   54.467202] intel_rapl: Found RAPL domain uncore
[   54.472083] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   54.950299] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   55.572097] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   55.574761] Bluetooth: reset realtek bluetooth device: failed with -16
[   56.600023] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   56.600839] Bluetooth: reset realtek bluetooth device: failed with -16
[   57.608132] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   57.610734] Bluetooth: reset realtek bluetooth device: failed with -16
[   57.613435] usbcore: registered new interface driver btusb
[   60.215951] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[   61.723790] audit: type=1400 audit(1516883936.719:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine" pid=1113 comm="apparmor_parser"
[   61.729174] audit: type=1400 audit(1516883936.719:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1113 comm="apparmor_parser"
[   61.733747] audit: type=1400 audit(1516883936.719:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//snap_update_ns" pid=1113 comm="apparmor_parser"
[   61.737356] audit: type=1400 audit(1516883936.731:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1114 comm="apparmor_parser"
[   61.743065] audit: type=1400 audit(1516883936.731:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1114 comm="apparmor_parser"
[   61.745045] audit: type=1400 audit(1516883936.731:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1114 comm="apparmor_parser"
[   61.832423] audit: type=1400 audit(1516883936.831:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1116 comm="apparmor_parser"
[   61.947999] audit: type=1400 audit(1516883936.943:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1112 comm="apparmor_parser"
[   61.954454] audit: type=1400 audit(1516883936.943:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1112 comm="apparmor_parser"
[   61.958047] audit: type=1400 audit(1516883936.943:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1112 comm="apparmor_parser"
[   63.047233] new mount options do not match the existing superblock, will be ignored
[   63.068771] Process accounting resumed
[   64.622429] call_modprobe: netdev---all   2 
[   64.625669] call_modprobe: --all   2 
[   64.631071] call_modprobe: netdev---all   2 
[   64.635446] call_modprobe: --all   2 
[   68.524099] call_modprobe: bt-proto-4   2 
[   68.796116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   68.796780] Bluetooth: BNEP filters: protocol multicast
[   68.797408] Bluetooth: BNEP socket layer initialized
[   69.302642] call_modprobe: crypto-lz4   2 
[   69.755637] call_modprobe: crypto-lz4-all   2 
[   69.758357] call_modprobe: zpool-z3fold   2 
[   69.761197] zswap: zpool z3fold not available
[   73.666945] zram: Added device: zram0
[   77.149614] zram0: detected capacity change from 0 to 2070937600
[   83.806340] Adding 2022396k swap on /dev/zram0.  Priority:32767 extents:1 across:2022396k SSDscFS
[   86.193532] kauditd_printk_skb: 24 callbacks suppressed
[   86.193533] audit: type=1400 audit(1516883961.191:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.anbox" pid=1558 comm="apparmor_parser"
[   86.199082] audit: type=1400 audit(1516883961.195:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.collect-bug-info" pid=1560 comm="apparmor_parser"
[   86.204915] audit: type=1400 audit(1516883961.203:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.container-manager" pid=1563 comm="apparmor_parser"
[   87.052689] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   87.052837] request_firmware: rtl_nic/rtl8168e-2.fw
[   87.174830] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   87.311895] r8169 0000:04:00.0 enp4s0: link down
[   87.311968] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   87.316191] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   87.329725] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[   87.394424] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[   87.434750] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   88.689620] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   89.748351] wlp3s0: authenticate with 38:91:d5:a4:de:f1
[   89.752938] wlp3s0: send auth to 38:91:d5:a4:de:f1 (try 1/3)
[   89.763128] wlp3s0: authenticated
[   89.768038] wlp3s0: associate with 38:91:d5:a4:de:f1 (try 1/3)
[   89.774477] audit: type=1400 audit(1516883964.771:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox-installer.anbox-installer" pid=1627 comm="apparmor_parser"
[   89.778044] wlp3s0: RX AssocResp from 38:91:d5:a4:de:f1 (capab=0x8431 status=0 aid=126)
[   89.791188] wlp3s0: associated
[   90.170785] call_modprobe: crypto-ccm(aes)   2 
[   90.173429] call_modprobe: crypto-ccm(aes)-all   2 
[   90.174523] call_modprobe: crypto-ccm   2 
[   90.209333] call_modprobe: crypto-cbcmac(aes)   2 
[   90.210249] call_modprobe: crypto-cbcmac(aes)-all   2 
[   90.211216] call_modprobe: crypto-ctr(aes)   2 
[   90.211930] call_modprobe: crypto-ctr(aes)-all   2 
[   90.212724] call_modprobe: crypto-ctr   2 
[   90.756871] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   92.391711] audit: type=1400 audit(1516883967.387:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1705 comm="apparmor_parser"
[   92.413089] audit: type=1400 audit(1516883967.411:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1705 comm="apparmor_parser"
[   92.413800] audit: type=1400 audit(1516883967.411:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1705 comm="apparmor_parser"
[   92.430806] audit: type=1400 audit(1516883967.427:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1709 comm="apparmor_parser"
[   95.564662] call_modprobe: iptable_filter   2 
[   96.581144] vboxdrv: Found 4 processor cores
[   96.600275] vboxdrv: TSC mode is Invariant, tentative frequency 2494322267 Hz
[   96.600279] vboxdrv: Successfully loaded version 5.2.2_Deepin (interface 0x00290000)
[   97.528534] NET: Registered protocol family 15
[   97.582081] VBoxNetFlt: Successfully started.
[   98.611689] audit: type=1400 audit(1516883973.607:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1861 comm="apparmor_parser"
[   98.627603] audit: type=1400 audit(1516883973.623:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1865 comm="apparmor_parser"
[   98.627613] audit: type=1400 audit(1516883973.623:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1865 comm="apparmor_parser"
[   98.627619] audit: type=1400 audit(1516883973.623:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1865 comm="apparmor_parser"
[   98.627624] audit: type=1400 audit(1516883973.623:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1865 comm="apparmor_parser"
[   98.713764] VBoxNetAdp: Successfully started.
[   99.222208] VBoxPciLinuxInit
[   99.222219] call_modprobe: pci-stub   2 
[  100.064681] vboxpci: IOMMU not found (not registered)
[  100.338799] Initializing XFRM netlink socket
[  102.538546] audit: type=1400 audit(1516883977.535:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2220 comm="apparmor_parser"
[  104.262103] audit: type=1400 audit(1516883979.259:50): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=2245 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[  104.307779] audit: type=1400 audit(1516883979.303:51): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=2245 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[  104.307787] audit: type=1400 audit(1516883979.303:52): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=2245 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  104.307807] audit: type=1400 audit(1516883979.303:53): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=2245 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  104.308088] audit: type=1400 audit(1516883979.307:54): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=2245 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  104.309914] audit: type=1400 audit(1516883979.307:55): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=2245 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  104.322385] audit: type=1400 audit(1516883979.319:56): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=2245 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  104.322566] audit: type=1400 audit(1516883979.319:57): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=2245 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  104.322590] audit: type=1400 audit(1516883979.319:58): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=2245 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  104.322747] audit: type=1400 audit(1516883979.319:59): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=2245 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  104.457171] call_modprobe: netdev-anbox0   2 
[  104.458066] call_modprobe: anbox0   2 
[  104.459376] call_modprobe: rtnl-link-bridge   2 
[  104.674772] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  104.690248] call_modprobe: netdev-0.0.0.0   2 
[  104.691410] call_modprobe: 0.0.0.0   2 
[  104.698414] call_modprobe: netdev-0.0.0.0   2 
[  104.699259] call_modprobe: 0.0.0.0   2 
[  104.772092] call_modprobe: iptable_nat   2 
[  104.847586] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  104.876680] call_modprobe: nf_conntrack-2   2 
[  104.890377] Bridge firewalling registered
[  104.984424] call_modprobe: ipt_comment   2 
[  105.008685] call_modprobe: ipt_MASQUERADE   2 
[  105.298802] call_modprobe: ipt_udp   2 
[  105.323341] call_modprobe: iptable_mangle   2 
[  105.433109] call_modprobe: ipt_CHECKSUM   2 
[  106.095323] call_modprobe: ipt_addrtype   2 
[  106.288220] Netfilter messages via NETLINK v0.30.
[  106.304261] call_modprobe: netdev-0.0.0.0   2 
[  106.306193] call_modprobe: 0.0.0.0   2 
[  106.340553] ctnetlink v0.93: registering with nfnetlink.
[  106.342109] call_modprobe: netdev-0.0.0.0   2 
[  106.343358] call_modprobe: 0.0.0.0   2 
[  106.463952] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[  106.470772] call_modprobe: netdev-0.0.0.0   2 
[  106.471971] call_modprobe: 0.0.0.0   2 
[  148.284645] call_modprobe: bt-proto-3   2 
[  148.370851] Bluetooth: RFCOMM TTY layer initialized
[  148.370865] Bluetooth: RFCOMM socket layer initialized
[  148.370877] Bluetooth: RFCOMM ver 1.11
[  160.535757] show_signal_msg: 366 callbacks suppressed
[  160.535760] dde-dock[2890]: segfault at 0 ip           (null) sp 00007ffd5cf49988 error 14 in dde-dock[55e9d1ff5000+79000]
[  209.754997] call_modprobe: fs-vfat   2 
[  209.844495] call_modprobe: nls_cp437   2 
[  209.860385] call_modprobe: nls_ascii   2 
[  214.574962] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  226.127459] r8169 0000:04:00.0: invalid short VPD tag 00 at offset 1
