[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.14.0-deepin2-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11)) #1 SMP PREEMPT Deepin 4.14.12-2 (2018-01-06) ()
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz root=LABEL=SYSX modules=sd-mod,usb-storage,ext4 intel_pstate=enable
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000bad86fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bad87000-0x00000000badbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000badbf000-0x00000000badc7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badc8000-0x00000000baefefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
[    0.000000] efi:  ACPI=0xbaffe000  ACPI 2.0=0xbaffe014  SMBIOS=0xbae87000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO HuronRiver Platform/Emerald Lake, BIOS 43CN45WW 02/16/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff92d2c0097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x1a8009000, 0x1a8009fff] PGTABLE
[    0.000000] BRK [0x1a800a000, 0x1a800afff] PGTABLE
[    0.000000] BRK [0x1a800b000, 0x1a800bfff] PGTABLE
[    0.000000] BRK [0x1a800c000, 0x1a800cfff] PGTABLE
[    0.000000] BRK [0x1a800d000, 0x1a800dfff] PGTABLE
[    0.000000] BRK [0x1a800e000, 0x1a800efff] PGTABLE
[    0.000000] BRK [0x1a800f000, 0x1a800ffff] PGTABLE
[    0.000000] BRK [0x1a8010000, 0x1a8010fff] PGTABLE
[    0.000000] BRK [0x1a8011000, 0x1a8011fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x31ebf000-0x34f56fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BAFFE120 00008C (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: FACP 0x00000000BAFEE000 0000F4 (v03 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: DSDT 0x00000000BAFF1000 009AF8 (v02 LENOVO SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF3D000 000040
[    0.000000] ACPI: FACS 0x00000000BAF3D000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFB000 001068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFEA000 000954 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE9000 0007C2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE8000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE5000 000242 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fdf7000-0x23fdfbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bac86fff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.000000] On node 0 totalpages: 2075174
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1182 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11891 pages used for memmap
[    0.000000]   DMA32 zone: 760968 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1310208 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbac87000-0xbad86fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad87000-0xbadbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadbf000-0xbadc7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadc8000-0xbaefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaeff000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba00000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @ffff92d4ffa00000 s143000 r8192 d29032 u262144
[    0.000000] pcpu-alloc: s143000 r8192 d29032 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2041565
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=LABEL=SYSX modules=sd-mod,usb-storage,ext4 intel_pstate=enable
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7959712K/8300696K available (10252K kernel code, 1166K rwdata, 3060K rodata, 1460K init, 664K bss, 340984K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29095 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.139 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.27 BogoMIPS (lpj=9976556)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170728
[    0.014299] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.014707] Security Framework initialized
[    0.014711] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.014738] AppArmor: AppArmor initialized
[    0.015939] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.016593] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016636] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016659] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016866] Disabled fast string operations
[    0.016871] CPU: Physical Processor ID: 0
[    0.016873] CPU: Processor Core ID: 0
[    0.016880] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016882] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016888] mce: CPU supports 7 MCE banks
[    0.016897] CPU0: Thermal monitoring enabled (TM1)
[    0.016907] process: using mwait in idle threads
[    0.016911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.016914] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.016916] Applying alternatives
[    0.016973] Applying alternatives done
[    0.016975] Applying alternatives smp done
[    0.017014] Freeing SMP alternatives memory: 28K
[    0.019766] smpboot: Max logical packages: 4
[    0.019843] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.020323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060022] TSC deadline timer enabled
[    0.060025] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.076026] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.076099] ... version:                3
[    0.076112] ... bit width:              48
[    0.076114] ... generic registers:      4
[    0.076116] ... value mask:             0000ffffffffffff
[    0.076118] ... max period:             00007fffffffffff
[    0.076120] ... fixed-purpose events:   3
[    0.076122] ... event mask:             000000070000000f
[    0.084009] Hierarchical SRCU implementation.
[    0.100296] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.108008] smp: Bringing up secondary CPUs ...
[    0.140083] x86: Booting SMP configuration:
[    0.140092] .... node  #0, CPUs:      #1
[    0.004000] Disabled fast string operations
[    0.172091]  #2
[    0.004000] Disabled fast string operations
[    0.204083]  #3
[    0.004000] Disabled fast string operations
[    0.206815] smp: Brought up 1 node, 4 CPUs
[    0.206815] smpboot: Total of 4 processors activated (19953.11 BogoMIPS)
[    0.208314] devtmpfs: initialized
[    0.208314] x86/mm: Memory block size: 128MB
[    0.208804] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.208804] PM: Registering ACPI NVS region [mem 0xbadbf000-0xbadc7fff] (36864 bytes)
[    0.208804] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff] (655360 bytes)
[    0.208804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.208804] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.208804] pinctrl core: initialized pinctrl subsystem
[    0.208804] NET: Registered protocol family 16
[    0.208804] cpuidle: using governor ladder
[    0.212041] cpuidle: using governor menu
[    0.212079] ACPI: bus type PCI registered
[    0.212082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.212144] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.212154] PCI: not using MMCONFIG
[    0.212154] PCI: Using configuration type 1 for base access
[    0.212156] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.212811] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.212811] ACPI: Added _OSI(Module Device)
[    0.212811] ACPI: Added _OSI(Processor Device)
[    0.212811] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.212811] ACPI: Added _OSI(Processor Aggregator Device)
[    0.212811] ACPI: Executed 1 blocks of module-level executable AML code
[    0.217868] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.218214] ACPI: Dynamic OEM Table Load:
[    0.218224] ACPI: SSDT 0xFFFF92D4F5DBC800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.218532] ACPI: Dynamic OEM Table Load:
[    0.218539] ACPI: SSDT 0xFFFF92D4F5E28C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.218765] ACPI: Dynamic OEM Table Load:
[    0.218771] ACPI: SSDT 0xFFFF92D4F5E29200 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.219494] ACPI: EC: EC started
[    0.219497] ACPI: EC: interrupt blocked
[    0.221332] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.221336] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.221340] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.221343] ACPI: Interpreter enabled
[    0.221367] ACPI: (supports S0 S1 S3 S4 S5)
[    0.221370] ACPI: Using IOAPIC for interrupt routing
[    0.221395] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.221841] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.221853] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.222101] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.229156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.229164] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.229203] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.229681] PCI host bridge to bus 0000:00
[    0.229686] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.229689] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.229692] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.229696] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.229699] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.229703] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.229712] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.229802] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.229834] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.229913] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.229923] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.229927] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.229931] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.229941] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.230067] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.230092] pci 0000:00:16.0: reg 0x10: [mem 0xf1605000-0xf160500f 64bit]
[    0.230167] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.230248] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.230270] pci 0000:00:1a.0: reg 0x10: [mem 0xf1609000-0xf16093ff]
[    0.230353] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.230431] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.230453] pci 0000:00:1b.0: reg 0x10: [mem 0xf1600000-0xf1603fff 64bit]
[    0.230526] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.230610] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.230686] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.230770] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.230852] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.230935] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.231017] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.231102] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.231124] pci 0000:00:1d.0: reg 0x10: [mem 0xf1608000-0xf16083ff]
[    0.231206] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.231284] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.231457] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.231474] pci 0000:00:1f.2: reg 0x10: [io  0x40b8-0x40bf]
[    0.231481] pci 0000:00:1f.2: reg 0x14: [io  0x40cc-0x40cf]
[    0.231489] pci 0000:00:1f.2: reg 0x18: [io  0x40b0-0x40b7]
[    0.231496] pci 0000:00:1f.2: reg 0x1c: [io  0x40c8-0x40cb]
[    0.231504] pci 0000:00:1f.2: reg 0x20: [io  0x4090-0x409f]
[    0.231511] pci 0000:00:1f.2: reg 0x24: [io  0x4080-0x408f]
[    0.231607] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.231625] pci 0000:00:1f.3: reg 0x10: [mem 0xf1604000-0xf16040ff 64bit]
[    0.231645] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.231734] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.231751] pci 0000:00:1f.5: reg 0x10: [io  0x40a8-0x40af]
[    0.231758] pci 0000:00:1f.5: reg 0x14: [io  0x40c4-0x40c7]
[    0.231766] pci 0000:00:1f.5: reg 0x18: [io  0x40a0-0x40a7]
[    0.231773] pci 0000:00:1f.5: reg 0x1c: [io  0x40c0-0x40c3]
[    0.231780] pci 0000:00:1f.5: reg 0x20: [io  0x4070-0x407f]
[    0.231788] pci 0000:00:1f.5: reg 0x24: [io  0x4060-0x406f]
[    0.231921] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
[    0.231936] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.231943] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.231951] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.231956] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.231961] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.231966] pci 0000:01:00.0: enabling Extended Tags
[    0.244033] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.244047] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.244053] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.244060] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.244154] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.244380] pci 0000:03:00.0: [8086:0084] type 00 class 0x028000
[    0.244583] pci 0000:03:00.0: reg 0x10: [mem 0xf1500000-0xf1501fff 64bit]
[    0.245335] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.256157] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.256165] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.256294] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.256420] pci 0000:04:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.256534] pci 0000:04:00.0: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[    0.256607] pci 0000:04:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[    0.257005] pci 0000:04:00.0: supports D1 D2
[    0.257006] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268084] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.268100] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.268120] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.268625] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.268687] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268745] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268802] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268859] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268916] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.268974] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.269030] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.269228] ACPI: EC: interrupt unblocked
[    0.269237] ACPI: EC: event unblocked
[    0.269244] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.269248] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.269350] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.269350] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.269350] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.269350] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.269350] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.269350] vgaarb: loaded
[    0.269350] EDAC MC: Ver: 3.0.0
[    0.269350] Registered efivars operations
[    0.284015] PCI: Using ACPI for IRQ routing
[    0.285319] PCI: pci_cache_line_size set to 64 bytes
[    0.285420] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.285422] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff]
[    0.285423] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.285424] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.285528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.285528] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.288001] clocksource: Switched to clocksource hpet
[    0.296864] VFS: Disk quotas dquot_6.6.0
[    0.296894] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.297001] AppArmor: AppArmor Filesystem Enabled
[    0.297021] pnp: PnP ACPI init
[    0.297172] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.297176] system 00:00: [io  0xffff] has been reserved
[    0.297179] system 00:00: [io  0xffff] has been reserved
[    0.297183] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.297186] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.297189] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.297192] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.297199] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297226] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.297276] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.297282] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.297358] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.297378] pnp 00:04: Plug and Play ACPI device, IDs SYN032a SYN0300 SYN0002 PNP0f13 (active)
[    0.297492] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297496] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.297499] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.297502] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.297506] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.297509] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.297512] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.297515] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.297518] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.297521] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.297525] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.297530] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297744] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.297748] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.297754] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.297771] pnp: PnP ACPI: found 7 devices
[    0.304045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.304053] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.304089] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.304092] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.304097] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.304100] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.304104] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.304108] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.304113] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.304125] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.304132] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.304141] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.304146] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.304154] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.304163] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.304164] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.304166] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.304167] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.304168] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.304169] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.304170] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.304171] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.304173] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.304174] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.304175] pci_bus 0000:04: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.304269] NET: Registered protocol family 2
[    0.304439] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.304573] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.304693] TCP: Hash tables configured (established 65536 bind 65536)
[    0.304742] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304773] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.304845] NET: Registered protocol family 1
[    0.304862] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.305288] PCI: CLS 64 bytes, default 64
[    0.305335] Unpacking initramfs...
[    1.099771] Freeing initrd memory: 49760K
[    1.099780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.099784] software IO TLB [mem 0xafe58000-0xb3e58000] (64MB) mapped at [ffff92d36fe58000-ffff92d373e57fff]
[    1.100254] audit: initializing netlink subsys (disabled)
[    1.100324] audit: type=2000 audit(1516938559.100:1): state=initialized audit_enabled=0 res=1
[    1.100631] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.100677] zbud: loaded
[    1.473063] Key type asymmetric registered
[    1.473067] Asymmetric key parser 'x509' registered
[    1.473089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.473129] io scheduler noop registered
[    1.473132] io scheduler deadline registered
[    1.473148] io scheduler cfq registered (default)
[    1.473150] io scheduler mq-deadline registered
[    1.473777] efifb: probing for efifb
[    1.473792] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    1.473795] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.473797] efifb: scrolling: redraw
[    1.473800] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.475553] Console: switching to colour frame buffer device 128x48
[    1.477251] fb0: EFI VGA frame buffer device
[    1.477277] intel_idle: disabled
[    1.486596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.487054] Linux agpgart interface v0.103
[    1.487125] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.487149] AMD IOMMUv2 functionality not available on this system
[    1.487470] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.490109] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.490159] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.490281] mousedev: PS/2 mouse device common for all mice
[    1.490342] rtc_cmos 00:01: RTC can wake from S4
[    1.490491] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.490540] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.490577] intel_pstate: Intel P-state driver initializing
[    1.491077] ledtrig-cpu: registered to indicate activity on CPUs
[    1.492298] NET: Registered protocol family 10
[    1.492943] Segment Routing with IPv6
[    1.493032] mip6: Mobile IPv6
[    1.493073] NET: Registered protocol family 17
[    1.493131] mpls_gso: MPLS GSO support
[    1.493883] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.494213] microcode: Microcode Update Driver: v2.2.
[    1.494237] sched_clock: Marking stable (1494195354, 0)->(1489847650, 4347704)
[    1.495042] registered taskstats version 1
[    1.497567] zswap: loaded using pool lzo/zbud
[    1.500210] AppArmor: AppArmor sha1 policy hashing enabled
[    1.502667] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.503831] rtc_cmos 00:01: setting system clock to 2018-01-26 03:49:20 UTC (1516938560)
[    1.506336] Freeing unused kernel memory: 1460K
[    1.507018] Write protecting the kernel read-only data: 16384k
[    1.508222] Freeing unused kernel memory: 2012K
[    1.510680] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.511695] Freeing unused kernel memory: 1036K
[    1.517421] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.518105] x86/mm: Checking user space page tables
[    1.523393] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.585167] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.585168] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[    1.585170] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.585181] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.585182] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.588663] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    1.592165] CPU3: Core temperature/speed normal
[    1.592176] CPU2: Core temperature/speed normal
[    1.592177] CPU2: Package temperature/speed normal
[    1.592191] CPU1: Package temperature/speed normal
[    1.592192] CPU0: Package temperature/speed normal
[    1.633064] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.634542] ACPI: Lid Switch [LID0]
[    1.635681] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.636825] ACPI: Sleep Button [SLPB]
[    1.638011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.639164] ACPI: Power Button [PWRF]
[    1.653099] ACPI: bus type USB registered
[    1.654354] usbcore: registered new interface driver usbfs
[    1.655663] usbcore: registered new interface driver hub
[    1.657833] usbcore: registered new device driver usb
[    1.659965] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.660080] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.660543] thermal LNXTHERM:00: registered as thermal_zone0
[    1.660545] ACPI: Thermal Zone [TZS0] (91 C)
[    1.660909] thermal LNXTHERM:01: registered as thermal_zone1
[    1.660910] ACPI: Thermal Zone [TZS1] (51 C)
[    1.670998] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.671010] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.671852] SCSI subsystem initialized
[    1.672544] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffbb6c40c8d000, f0:de:f1:e9:4a:0b, XID 0c200000 IRQ 24
[    1.672546] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.672852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.673657] ehci-pci: EHCI PCI platform driver
[    1.676163] libata version 3.00 loaded.
[    1.689066] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.690620] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.692195] ehci-pci 0000:00:1a.0: debug port 2
[    1.697622] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.697646] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1609000
[    1.699571] AVX version of gcm_enc/dec engaged.
[    1.701106] AES CTR mode by8 optimization enabled
[    1.702965] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)   2 
[    1.707249] call_modprobe: crypto-cryptd(__driver-gcm-aes-aesni)-all   2 
[    1.712045] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.713343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.713766] call_modprobe: crypto-cryptd(__ecb-aes-aesni)   2 
[    1.714276] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.714966] call_modprobe: crypto-cryptd(__ecb-aes-aesni)-all   2 
[    1.716759] call_modprobe: crypto-cryptd(__cbc-aes-aesni)   2 
[    1.717928] call_modprobe: crypto-cryptd(__cbc-aes-aesni)-all   2 
[    1.719599] call_modprobe: crypto-cryptd(__ctr-aes-aesni)   2 
[    1.720814] call_modprobe: crypto-cryptd(__ctr-aes-aesni)-all   2 
[    1.722219] call_modprobe: crypto-cryptd(__xts-aes-aesni)   2 
[    1.723352] call_modprobe: crypto-cryptd(__xts-aes-aesni)-all   2 
[    1.724790] call_modprobe: crypto-fpu(pcbc(__aes-aesni))   2 
[    1.725995] call_modprobe: crypto-fpu(pcbc(__aes-aesni))-all   2 
[    1.727158] call_modprobe: crypto-pcbc(__aes-aesni)   2 
[    1.728422] call_modprobe: crypto-pcbc(__aes-aesni)-all   2 
[    1.729594] call_modprobe: crypto-pcbc   2 
[    1.733419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.734787] usb usb1: Product: EHCI Host Controller
[    1.736147] usb usb1: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.737481] usb usb1: SerialNumber: 0000:00:1a.0
[    1.739044] hub 1-0:1.0: USB hub found
[    1.739397] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.740942] hub 1-0:1.0: 2 ports detected
[    1.742679] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)   2 
[    1.742735] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.742743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.742759] ehci-pci 0000:00:1d.0: debug port 2
[    1.746669] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.746689] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1608000
[    1.749288] call_modprobe: crypto-cryptd(__ghash-pclmulqdqni)-all   2 
[    1.764068] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.765597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.766910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.768265] usb usb2: Product: EHCI Host Controller
[    1.769558] usb usb2: Manufacturer: Linux 4.14.0-deepin2-amd64 ehci_hcd
[    1.770854] usb usb2: SerialNumber: 0000:00:1d.0
[    1.772467] hub 2-0:1.0: USB hub found
[    1.773718] hub 2-0:1.0: 2 ports detected
[    1.775119] ata_piix 0000:00:1f.2: version 2.13
[    1.775263] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.937457] scsi host0: ata_piix
[    1.940007] scsi host1: ata_piix
[    1.942231] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
[    1.944334] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
[    1.946835] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.951070] scsi host2: ata_piix
[    1.953394] scsi host3: ata_piix
[    1.954565] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
[    1.955693] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
[    1.957452] [drm] Memory usable by graphics device = 2048M
[    1.958585] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    1.958586] fb: switching to inteldrmfb from EFI VGA
[    1.959708] Console: switching to colour dummy device 80x25
[    1.959950] [drm] Replacing VGA console driver
[    1.966334] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.966343] [drm] Driver supports precise vblank timestamp query.
[    1.968590] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.016916] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    2.017466] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    2.017976] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6
[    2.019491] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.022615] acpi device:3f: registered as cooling_device4
[    2.022882] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    2.048244] fbcon: inteldrmfb (fb0) is primary device
[    2.080161] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.108152] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.108167] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[    2.108192] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns
[    2.236791] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.236796] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.237349] hub 1-1:1.0: USB hub found
[    2.237437] hub 1-1:1.0: 6 ports detected
[    2.264693] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.264698] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.265359] hub 2-1:1.0: USB hub found
[    2.265434] hub 2-1:1.0: 6 ports detected
[    2.283039] ata4: SATA link down (SStatus 0 SControl 300)
[    2.339199] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    2.393368] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    2.427589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.440208] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.488096] ata3.00: ATA-8: TOSHIBA MQ01ABD100, AX101U, max UDMA/100
[    2.488100] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.493498] ata3.00: configured for UDMA/100
[    2.524180] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    2.552130] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.637666] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00cb
[    2.637671] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.637674] usb 1-1.2: Product: Microsoft USB Optical Mouse
[    2.637677] usb 1-1.2: Manufacturer: PixArt
[    2.645181] hidraw: raw HID events driver (C) Jiri Kosina
[    2.651760] usbcore: registered new interface driver usbhid
[    2.651760] usbhid: USB HID core driver
[    2.652727] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00CB.0001/input/input8
[    2.652832] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.662762] usb 2-1.3: New USB device found, idVendor=1c7a, idProduct=0603
[    2.662767] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.662771] usb 2-1.3: Product: EgisTec_ES603
[    2.662773] usb 2-1.3: Manufacturer: EgisTec
[    2.720183] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    2.740196] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[    2.853435] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e00d
[    2.853441] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.853444] usb 2-1.4: Product: Broadcom Bluetooth 2.1 Device
[    2.853447] usb 2-1.4: Manufacturer: Broadcom Corp
[    2.853449] usb 2-1.4: SerialNumber: C01885EBD4E4
[    2.936179] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[    2.939186] usb 1-1.5: New USB device found, idVendor=5986, idProduct=0364
[    2.939191] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.939194] usb 1-1.5: Product: Lenovo EasyCamera
[    2.939197] usb 1-1.5: Manufacturer: Bison Electronics Inc.
[    2.984183] ata2.00: failed to resume link (SControl 0)
[    2.997192] Console: switching to colour frame buffer device 170x48
[    3.045840] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.047223] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139
[    3.048074] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.048851] usb 2-1.6: Product: USB2.0-CRW
[    3.049603] usb 2-1.6: Manufacturer: Generic
[    3.050345] usb 2-1.6: SerialNumber: 20100201396000000
[    3.057423] usbcore: registered new interface driver rtsx_usb
[    3.132444] clocksource: Switched to clocksource tsc
[    3.312024] ata2.00: SATA link down (SStatus 4 SControl 0)
[    3.313010] ata2.01: SATA link down (SStatus 0 SControl 300)
[    3.313976] ata1.01: failed to resume link (SControl 0)
[    3.476261] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.479078] ata1.01: SATA link down (SStatus 4 SControl 0)
[    3.505513] ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
[    3.508218] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.532894] ata1.00: configured for UDMA/133
[    3.536039] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 1A03 PQ: 0 ANSI: 5
[    3.539413] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1U   PQ: 0 ANSI: 5
[    3.542313] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.542439] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.542441] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    3.542452] sd 2:0:0:0: [sdb] Write Protect is off
[    3.542454] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.542470] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.549020] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.550212] sd 0:0:0:0: [sda] Write Protect is off
[    3.551357] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.551375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.651377]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    3.653694] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.679225]  sdb: sdb1 sdb2 sdb3
[    3.682755] sd 2:0:0:0: [sdb] Attached SCSI disk
[    4.828066] raid6: sse2x1   gen()  7577 MB/s
[    4.876055] raid6: sse2x1   xor()  5544 MB/s
[    4.924053] raid6: sse2x2   gen() 10017 MB/s
[    4.972049] raid6: sse2x2   xor()  7285 MB/s
[    5.020051] raid6: sse2x4   gen() 11674 MB/s
[    5.068050] raid6: sse2x4   xor()  8573 MB/s
[    5.068718] raid6: using algorithm sse2x4 gen() 11674 MB/s
[    5.069385] raid6: .... xor() 8573 MB/s, rmw enabled
[    5.070049] raid6: using ssse3x2 recovery algorithm
[    5.071015] xor: automatically using best checksumming function   avx       
[    5.071942] async_tx: api initialized (async)
[    5.110386] Btrfs loaded, crc32c=crc32c-intel
[    5.761515] random: crng init done
[   46.928691] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   48.663270] ip_tables: (C) 2000-2006 Netfilter Core Team
[   48.664692] call_modprobe: fs-efivarfs   2 
[   48.990171] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   48.992162] systemd[1]: Detected architecture x86-64.
[   49.066948] systemd[1]: Set hostname to <duanyao-laptop>.
[   51.662994] systemd[1]: Reached target Swap.
[   51.666345] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   51.667766] systemd[1]: Listening on Journal Audit Socket.
[   51.674527] systemd[1]: Created slice System Slice.
[   51.681713] systemd[1]: Created slice system-getty.slice.
[   51.685967] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   51.687451] systemd[1]: Reached target User and Group Name Lookups.
[   52.516698] call_modprobe: parport_lowlevel   2 
[   52.730191] lp: driver loaded but no devices found
[   52.815870] call_modprobe: parport_lowlevel   2 
[   52.819382] ppdev: user-space parallel port driver
[   52.943317] call_modprobe: fs-binfmt_misc   2 
[   52.995106] fuse init (API version 7.26)
[   53.468921] Unsafe core_pattern used with fs.suid_dumpable=2.
               Pipe handler or fully qualified core dump path required.
               Set kernel.core_pattern before fs.suid_dumpable.
[   54.072034] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[   54.148694] systemd-journald[560]: Received request to flush runtime journal from PID 1
[   54.586001] systemd-journald[560]: File /var/log/journal/833f77d352f54f629d5c1ea30a32f64e/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   55.196525] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[   55.201193] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   55.202921] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   55.204894] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   55.206989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   55.208392] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   55.208397] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   55.208401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   55.208401] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
[   55.208405] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
[   55.208407] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   55.208408] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   55.661671] call_modprobe: char-major-10-237   2 
[   55.661671] call_modprobe: char-major-10-237   2 
[   55.661672] call_modprobe: char-major-10-237   2 
[   55.662034] call_modprobe: char-major-10-237   2 
[   55.662098] call_modprobe: char-major-10-237   2 
[   55.751529] loop: module loaded
[   55.821549] acer_wmi: Acer Laptop ACPI-WMI Extras
[   55.822713] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[   55.888506] call_modprobe: fs-squashfs   2 
[   55.904204] call_modprobe: fs-squashfs   2 
[   55.918473] Dev loop2: unable to read RDB block 8
[   55.920008]  loop2: unable to read partition table
[   55.921597] loop2: partition table beyond EOD, truncated
[   55.923084] loop_reread_partitions: partition scan of loop2 () failed (rc=-5)
[   55.949170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   56.257284] ACPI: Battery Slot [BAT0] (battery present)
[   56.378246] ACPI: AC Adapter [ADP1] (on-line)
[   56.487531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   56.519154] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[   56.963503] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   56.965202] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   57.178435] iwlwifi: unknown parameter 'auto_agg' ignored
[   57.179373] Intel(R) Wireless WiFi driver for Linux
[   57.180794] Copyright(c) 2003- 2015 Intel Corporation
[   57.182000] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   57.413565] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-1000-5.ucode
[   57.414418] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[   57.415164] call_modprobe: iwldvm   2 
[   57.550470] EFI Variables Facility v0.08 2004-May-17
[   57.714645] pstore: using zlib compression
[   57.723119] pstore: Registered efi as persistent store backend
[   57.832140] wl: loading out-of-tree module taints kernel.
[   57.832847] wl: module license 'MIXED/Proprietary' taints kernel.
[   57.833533] Disabling lock debugging due to kernel taint
[   57.853168] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   57.904025] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   57.904802] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   57.905551] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   57.906287] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   57.946655] call_modprobe: crypto-arc4   2 
[   58.012327] call_modprobe: crypto-arc4-all   2 
[   58.017882] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   59.229064] iTCO_vendor_support: vendor-support=0
[   59.240031] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   59.241326] call_modprobe: i915   2 
[   59.251564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   59.251609] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   59.251704] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   59.271204] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   59.272492] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   59.273818] RAPL PMU: hw unit of domain package 2^-16 Joules
[   59.273820] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   60.849924] call_modprobe: crypto-stdrng   2 
[   60.856361] call_modprobe: hdaudio:v10EC0272r00100001a01
                  2 
[   60.950948] call_modprobe: crypto-hmac(sha256)   2 
[   60.955985] call_modprobe: crypto-hmac(sha256)-all   2 
[   60.961677] call_modprobe: crypto-stdrng-all   2 
[   60.963298] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   60.964738] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   60.965825] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   60.966896] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   60.967978] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   60.969521] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   60.970951] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   60.979215] call_modprobe: hdaudio:v80862805r00100000a01
                  2 
[   61.094909] Bluetooth: Core ver 2.22
[   61.095704] NET: Registered protocol family 31
[   61.096935] Bluetooth: HCI device and connection manager initialized
[   61.098139] Bluetooth: HCI socket layer initialized
[   61.099314] Bluetooth: L2CAP socket layer initialized
[   61.100505] Bluetooth: SCO socket layer initialized
[   61.382808] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   61.384318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   61.385578] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   61.386844] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   61.530228] media: Linux media interface: v0.10
[   61.666149] Linux video capture interface: v2.00
[   61.906374] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0364)
[   61.924359] uvcvideo 1-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[   61.925760] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[   61.927557] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   61.929743] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
[   61.931789] usbcore: registered new interface driver uvcvideo
[   61.933239] USB Video Class driver (1.1.1)
[   61.971045] intel_rapl: Found RAPL domain package
[   61.971883] intel_rapl: Found RAPL domain core
[   61.974438] intel_rapl: Found RAPL domain uncore
[   62.776086] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   62.777316] Bluetooth: reset realtek bluetooth device: failed with -16
[   62.884044] usb 1-1.2: USB disconnect, device number 3
[   63.225577] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   63.800072] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   63.802297] Bluetooth: reset realtek bluetooth device: failed with -16
[   64.392179] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
[   64.505110] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00cb
[   64.507739] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.510454] usb 1-1.2: Product: Microsoft USB Optical Mouse
[   64.511798] usb 1-1.2: Manufacturer: PixArt
[   64.516769] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00CB.0002/input/input16
[   64.518477] hid-generic 0003:045E:00CB.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[   64.828187] Bluetooth: reset realtek bluetooth device: lock failed with -16
[   64.831417] Bluetooth: reset realtek bluetooth device: failed with -16
[   64.834453] usbcore: registered new interface driver btusb
[   65.658037] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[   67.254313] audit: type=1400 audit(1516938626.244:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine" pid=1145 comm="apparmor_parser"
[   67.260409] audit: type=1400 audit(1516938626.244:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1145 comm="apparmor_parser"
[   67.264308] audit: type=1400 audit(1516938626.244:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3748/usr/lib/snapd/snap-confine//snap_update_ns" pid=1145 comm="apparmor_parser"
[   67.268886] audit: type=1400 audit(1516938626.256:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1146 comm="apparmor_parser"
[   67.273897] audit: type=1400 audit(1516938626.256:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1146 comm="apparmor_parser"
[   67.276035] audit: type=1400 audit(1516938626.256:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1146 comm="apparmor_parser"
[   67.297162] audit: type=1400 audit(1516938626.288:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1148 comm="apparmor_parser"
[   67.310811] audit: type=1400 audit(1516938626.300:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1144 comm="apparmor_parser"
[   67.314803] audit: type=1400 audit(1516938626.300:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1144 comm="apparmor_parser"
[   67.318945] audit: type=1400 audit(1516938626.300:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1144 comm="apparmor_parser"
[   69.899088] Process accounting resumed
[   70.874079] call_modprobe: bt-proto-4   2 
[   70.989042] new mount options do not match the existing superblock, will be ignored
[   71.170711] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   71.171373] Bluetooth: BNEP filters: protocol multicast
[   71.172021] Bluetooth: BNEP socket layer initialized
[   72.341992] call_modprobe: netdev---all   2 
[   72.344492] call_modprobe: --all   2 
[   72.346778] call_modprobe: netdev---all   2 
[   72.348963] call_modprobe: --all   2 
[   75.404765] call_modprobe: crypto-lz4   2 
[   76.464239] call_modprobe: crypto-lz4-all   2 
[   76.466815] call_modprobe: zpool-z3fold   2 
[   76.502529] zswap: zpool z3fold not available
[   79.708498] zram: Added device: zram0
[   82.249615] zram0: detected capacity change from 0 to 2070937600
[   84.206770] Adding 2022396k swap on /dev/zram0.  Priority:32767 extents:1 across:2022396k SSDscFS
[   86.294327] kauditd_printk_skb: 24 callbacks suppressed
[   86.294339] audit: type=1400 audit(1516938645.284:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.anbox" pid=1563 comm="apparmor_parser"
[   86.302166] audit: type=1400 audit(1516938645.292:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.collect-bug-info" pid=1565 comm="apparmor_parser"
[   86.307787] audit: type=1400 audit(1516938645.300:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox.container-manager" pid=1567 comm="apparmor_parser"
[   90.417840] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   90.417971] request_firmware: rtl_nic/rtl8168e-2.fw
[   90.460745] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   90.595995] r8169 0000:04:00.0 enp4s0: link down
[   90.596075] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   90.599547] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.613050] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[   90.678884] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[   90.716100] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   93.023046] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   93.663155] audit: type=1400 audit(1516938652.652:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.anbox-installer.anbox-installer" pid=1655 comm="apparmor_parser"
[   94.036320] wlp3s0: authenticate with 38:91:d5:a4:de:f1
[   94.038566] wlp3s0: send auth to 38:91:d5:a4:de:f1 (try 1/3)
[   94.040857] wlp3s0: authenticated
[   94.048099] wlp3s0: associate with 38:91:d5:a4:de:f1 (try 1/3)
[   94.058407] wlp3s0: RX AssocResp from 38:91:d5:a4:de:f1 (capab=0x8431 status=0 aid=126)
[   94.074269] wlp3s0: associated
[   94.458853] call_modprobe: crypto-ccm(aes)   2 
[   94.461890] call_modprobe: crypto-ccm(aes)-all   2 
[   94.464819] call_modprobe: crypto-ccm   2 
[   94.550815] call_modprobe: crypto-cbcmac(aes)   2 
[   94.551665] call_modprobe: crypto-cbcmac(aes)-all   2 
[   94.552511] call_modprobe: crypto-ctr(aes)   2 
[   94.553174] call_modprobe: crypto-ctr(aes)-all   2 
[   94.553952] call_modprobe: crypto-ctr   2 
[   94.587362] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   94.736981] audit: type=1400 audit(1516938653.728:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1682 comm="apparmor_parser"
[   94.753180] audit: type=1400 audit(1516938653.744:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1682 comm="apparmor_parser"
[   94.753551] audit: type=1400 audit(1516938653.744:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1682 comm="apparmor_parser"
[   95.110164] audit: type=1400 audit(1516938654.100:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1710 comm="apparmor_parser"
[   98.071747] call_modprobe: iptable_filter   2 
[   98.772269] vboxdrv: Found 4 processor cores
[   98.792540] vboxdrv: TSC mode is Invariant, tentative frequency 2510339765 Hz
[   98.792545] vboxdrv: Successfully loaded version 5.2.2_Deepin (interface 0x00290000)
[   99.247216] NET: Registered protocol family 15
[   99.612329] VBoxNetFlt: Successfully started.
[   99.873194] audit: type=1400 audit(1516938658.846:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1880 comm="apparmor_parser"
[   99.883999] audit: type=1400 audit(1516938658.858:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1884 comm="apparmor_parser"
[   99.884006] audit: type=1400 audit(1516938658.858:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1884 comm="apparmor_parser"
[   99.884009] audit: type=1400 audit(1516938658.858:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1884 comm="apparmor_parser"
[   99.884012] audit: type=1400 audit(1516938658.858:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1884 comm="apparmor_parser"
[   99.999497] VBoxNetAdp: Successfully started.
[  100.785780] VBoxPciLinuxInit
[  100.785795] call_modprobe: pci-stub   2 
[  101.917154] vboxpci: IOMMU not found (not registered)
[  102.121053] audit: type=1400 audit(1516938661.087:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1981 comm="apparmor_parser"
[  102.334810] Initializing XFRM netlink socket
[  108.847144] audit: type=1400 audit(1516938667.794:50): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=2303 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[  108.911526] audit: type=1400 audit(1516938667.858:51): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=2303 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[  108.911548] audit: type=1400 audit(1516938667.858:52): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=2303 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  108.911562] audit: type=1400 audit(1516938667.858:53): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=2303 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  108.912324] audit: type=1400 audit(1516938667.858:54): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=2303 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  108.917860] audit: type=1400 audit(1516938667.862:55): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=2303 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  109.027614] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  109.042683] Bridge firewalling registered
[  109.065590] audit: type=1400 audit(1516938668.009:56): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=2303 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  109.065827] audit: type=1400 audit(1516938668.009:57): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=2303 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  109.065833] audit: type=1400 audit(1516938668.009:58): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=2303 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[  109.066080] audit: type=1400 audit(1516938668.009:59): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=2303 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  109.155366] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  109.225916] call_modprobe: netdev-anbox0   2 
[  109.227989] call_modprobe: anbox0   2 
[  109.244314] call_modprobe: netdev-0.0.0.0   2 
[  109.245523] call_modprobe: 0.0.0.0   2 
[  109.253604] call_modprobe: netdev-0.0.0.0   2 
[  109.254761] call_modprobe: 0.0.0.0   2 
[  109.313115] call_modprobe: iptable_nat   2 
[  109.376926] call_modprobe: ipt_addrtype   2 
[  109.440654] call_modprobe: nf_conntrack-2   2 
[  109.692841] call_modprobe: ipt_comment   2 
[  109.719428] call_modprobe: ipt_MASQUERADE   2 
[  110.071109] call_modprobe: ipt_udp   2 
[  110.152737] call_modprobe: iptable_mangle   2 
[  110.265719] call_modprobe: ipt_CHECKSUM   2 
[  110.629734] Netfilter messages via NETLINK v0.30.
[  110.648534] ctnetlink v0.93: registering with nfnetlink.
[  110.651245] call_modprobe: netdev-0.0.0.0   2 
[  110.652544] call_modprobe: 0.0.0.0   2 
[  110.669237] call_modprobe: netdev-0.0.0.0   2 
[  110.670283] call_modprobe: 0.0.0.0   2 
[  110.895369] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[  110.902705] call_modprobe: netdev-0.0.0.0   2 
[  110.905066] call_modprobe: 0.0.0.0   2 
[  134.170219] systemd-journald[560]: File /var/log/journal/833f77d352f54f629d5c1ea30a32f64e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[  173.919137] call_modprobe: bt-proto-3   2 
[  174.003613] Bluetooth: RFCOMM TTY layer initialized
[  174.003628] Bluetooth: RFCOMM socket layer initialized
[  174.003641] Bluetooth: RFCOMM ver 1.11
[  239.905083] call_modprobe: fs-vfat   2 
[  239.977003] call_modprobe: nls_cp437   2 
[  239.992869] call_modprobe: nls_ascii   2 
[  244.408112] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  255.633312] r8169 0000:04:00.0: invalid short VPD tag 00 at offset 1
