[10356.223647] bridge-wlp3s0: device is wireless, enabling SMAC
[10356.223650] bridge-wlp3s0: up
[10356.223653] bridge-wlp3s0: attached
[10356.423395] userif-3: sent link down event.
[10356.423398] userif-3: sent link up event.
[17111.190908] perf: interrupt took too long (6223 > 6161), lowering kernel.perf_event_max_sample_rate to 32000
[17502.155301] /dev/vmmon[8022]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[17502.303458] /dev/vmmon[8022]: Monitor IPI vector: ff
[17502.303461] /dev/vmmon[8022]: HV      IPI vector: f2
[17503.942074] /dev/vmnet: open called by PID 8076 (vmx-vcpu-0)
[17503.942091] /dev/vmnet: port on hub 0 successfully opened
[17858.435248] wlp3s0: deauthenticating from 2c:b2:1a:ff:a6:62 by local choice (Reason: 3=DEAUTH_LEAVING)
[17858.455942] bridge-wlp3s0: disabling the bridge on dev down
[17858.455991] bridge-wlp3s0: down
[17858.456000] bridge-wlp3s0: detached
[17858.630170] userif-3: sent link down event.
[17858.630172] userif-3: sent link up event.
[17863.540874] PM: Syncing filesystems ... done.
[17863.608958] PM: Preparing system for sleep (mem)
[17863.609682] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[17863.609728] Freezing user space processes ... (elapsed 0.003 seconds) done.
[17863.613327] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[17863.614950] PM: Suspending system (mem)
[17863.614989] Suspending console(s) (use no_console_suspend to debug)
[17863.615759] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[17863.615832] sd 2:0:0:0: [sdb] Stopping disk
[17863.616048] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[17863.619708] sd 0:0:0:0: [sda] Stopping disk
[17863.877676] e1000e: EEE TX LPI TIMER: 00000011
[17864.484252] PM: suspend of devices complete after 869.080 msecs
[17864.504665] PM: late suspend of devices complete after 20.413 msecs
[17864.508144] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[17864.508236] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[17864.508383] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[17864.508392] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[17864.556457] PM: noirq suspend of devices complete after 51.793 msecs
[17864.556996] ACPI: Preparing to enter system sleep state S3
[17864.900395] ACPI : EC: event blocked
[17864.900396] ACPI : EC: EC stopped
[17864.900397] PM: Saving platform NVS memory
[17864.900415] Disabling non-boot CPUs ...
[17864.924747] Broke affinity for irq 29
[17864.924753] Broke affinity for irq 30
[17864.924758] Broke affinity for irq 31
[17864.924763] Broke affinity for irq 32
[17864.926034] smpboot: CPU 1 is now offline
[17864.956592] Broke affinity for irq 29
[17864.956595] Broke affinity for irq 30
[17864.956597] Broke affinity for irq 31
[17864.956599] Broke affinity for irq 32
[17864.956602] Broke affinity for irq 35
[17864.957614] smpboot: CPU 2 is now offline
[17864.980621] Broke affinity for irq 1
[17864.980627] Broke affinity for irq 8
[17864.980630] Broke affinity for irq 9
[17864.980634] Broke affinity for irq 12
[17864.980639] Broke affinity for irq 16
[17864.980644] Broke affinity for irq 18
[17864.980648] Broke affinity for irq 23
[17864.980653] Broke affinity for irq 27
[17864.980657] Broke affinity for irq 28
[17864.980661] Broke affinity for irq 29
[17864.980665] Broke affinity for irq 30
[17864.980668] Broke affinity for irq 31
[17864.980672] Broke affinity for irq 32
[17864.980676] Broke affinity for irq 33
[17864.980680] Broke affinity for irq 35
[17864.981714] smpboot: CPU 3 is now offline
[17864.985472] ACPI: Low-level resume complete
[17864.985518] ACPI : EC: EC started
[17864.985519] PM: Restoring platform NVS memory
[17864.985816] Suspended for 6922.446 seconds
[17864.985873] Enabling non-boot CPUs ...
[17864.986530] x86: Booting SMP configuration:
[17864.986531] smpboot: Booting Node 0 Processor 1 APIC 0x1
[17864.986810] Disabled fast string operations
[17864.988984]  cache: parent cpu1 should not be sleeping
[17865.194157] CPU1 is up
[17865.194787] smpboot: Booting Node 0 Processor 2 APIC 0x2
[17865.195032] Disabled fast string operations
[17865.197204]  cache: parent cpu2 should not be sleeping
[17865.406116] CPU2 is up
[17865.406725] smpboot: Booting Node 0 Processor 3 APIC 0x3
[17865.406970] Disabled fast string operations
[17865.409168]  cache: parent cpu3 should not be sleeping
[17865.569895] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229998852718676 new 18445229991930272608 attempts 1
[17865.642277] CPU3 is up
[17865.645251] ACPI: Waking up from system sleep state S3
[17866.437847] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[17866.445889] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[17866.445899] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[17866.445935] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[17866.445983] PM: noirq resume of devices complete after 52.172 msecs
[17866.446296] PM: early resume of devices complete after 0.280 msecs
[17866.446376] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[17866.446601] ACPI : EC: event unblocked
[17866.446720] usb usb1: root hub lost power or was reset
[17866.446722] usb usb2: root hub lost power or was reset
[17866.447061] sd 2:0:0:0: [sdb] Starting disk
[17866.447062] sd 0:0:0:0: [sda] Starting disk
[17866.447120] rtc_cmos 00:02: System wakeup disabled by ACPI
[17866.701743] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[17866.796131] ata5: SATA link down (SStatus 0 SControl 300)
[17866.796191] ata2: SATA link down (SStatus 0 SControl 300)
[17866.796465] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[17866.796492] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17866.796976] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17866.796978] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[17866.796980] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[17866.797379] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17866.797381] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[17866.797382] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[17866.797486] ata1.00: supports DRM functions and may not be fully accessible
[17866.799087] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17866.799093] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[17866.799097] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[17866.800382] ata3.00: configured for UDMA/133
[17866.889729] usb 3-1.2: reset full-speed USB device number 12 using ehci-pci
[17866.896667] ata1.00: NCQ Send/Recv Log not supported
[17866.897401] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17866.897406] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[17866.897408] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[17866.897525] ata1.00: supports DRM functions and may not be fully accessible
[17866.897625] ata1.00: NCQ Send/Recv Log not supported
[17866.897912] ata1.00: configured for UDMA/133
[17867.077756] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[17867.189420] PM: resume of devices complete after 743.220 msecs
[17867.189520] usb 3-1.4:1.0: rebind failed: -517
[17867.189521] usb 3-1.4:1.1: rebind failed: -517
[17867.189727] PM: Finishing wakeup.
[17867.189728] Restarting tasks ... done.
[17867.244372] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[17867.379398] e1000e: enp0s25 NIC Link is Down
[17867.385442] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[17867.598224] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[17867.601096] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17867.602713] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[17867.602977] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[17867.603083] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[17867.885619] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[17867.885890] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[17867.885990] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[17867.974726] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17868.035781] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17874.016472] wlp3s0: authenticate with 2c:b2:1a:ff:a6:62
[17874.018424] wlp3s0: send auth to 2c:b2:1a:ff:a6:62 (try 1/3)
[17874.026643] wlp3s0: authenticated
[17874.029073] wlp3s0: associate with 2c:b2:1a:ff:a6:62 (try 1/3)
[17874.037926] wlp3s0: RX AssocResp from 2c:b2:1a:ff:a6:62 (capab=0x131 status=0 aid=4)
[17874.056990] wlp3s0: associated
[17874.057065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[17874.078553] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:b2:1a:ff:a6:62
[17874.146312] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[17874.146345] /dev/vmnet: port on hub 0 successfully opened
[17874.146367] bridge-wlp3s0: device is wireless, enabling SMAC
[17874.146373] bridge-wlp3s0: up
[17874.146433] bridge-wlp3s0: attached
[17874.348118] userif-3: sent link down event.
[17874.348122] userif-3: sent link up event.
[18326.042982] wlp3s0: deauthenticating from 2c:b2:1a:ff:a6:62 by local choice (Reason: 3=DEAUTH_LEAVING)
[18326.071183] bridge-wlp3s0: disabling the bridge on dev down
[18326.071208] bridge-wlp3s0: down
[18326.071218] bridge-wlp3s0: detached
[18326.264363] userif-3: sent link down event.
[18326.264375] userif-3: sent link up event.
[18331.228636] PM: Syncing filesystems ... done.
[18331.246395] PM: Preparing system for sleep (mem)
[18331.247133] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[18331.247162] Freezing user space processes ... (elapsed 0.003 seconds) done.
[18331.251011] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18331.252468] PM: Suspending system (mem)
[18331.252496] Suspending console(s) (use no_console_suspend to debug)
[18331.257133] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[18331.257333] sd 2:0:0:0: [sdb] Stopping disk
[18331.257638] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18331.260043] sd 0:0:0:0: [sda] Stopping disk
[18331.512386] e1000e: EEE TX LPI TIMER: 00000011
[18332.097655] PM: suspend of devices complete after 845.035 msecs
[18332.115599] PM: late suspend of devices complete after 17.941 msecs
[18332.116417] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[18332.117208] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18332.117573] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[18332.117600] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[18332.167432] PM: noirq suspend of devices complete after 51.832 msecs
[18332.167970] ACPI: Preparing to enter system sleep state S3
[18332.511374] ACPI : EC: event blocked
[18332.511375] ACPI : EC: EC stopped
[18332.511376] PM: Saving platform NVS memory
[18332.511391] Disabling non-boot CPUs ...
[18332.531680] Broke affinity for irq 16
[18332.531695] Broke affinity for irq 29
[18332.531699] Broke affinity for irq 30
[18332.531702] Broke affinity for irq 31
[18332.531706] Broke affinity for irq 32
[18332.532733] smpboot: CPU 1 is now offline
[18332.559578] Broke affinity for irq 16
[18332.559595] Broke affinity for irq 29
[18332.559598] Broke affinity for irq 30
[18332.559600] Broke affinity for irq 31
[18332.559604] Broke affinity for irq 32
[18332.559607] Broke affinity for irq 35
[18332.560872] smpboot: CPU 2 is now offline
[18332.587521] Broke affinity for irq 1
[18332.587525] Broke affinity for irq 8
[18332.587528] Broke affinity for irq 9
[18332.587531] Broke affinity for irq 12
[18332.587534] Broke affinity for irq 16
[18332.587537] Broke affinity for irq 18
[18332.587541] Broke affinity for irq 23
[18332.587545] Broke affinity for irq 27
[18332.587547] Broke affinity for irq 28
[18332.587550] Broke affinity for irq 29
[18332.587552] Broke affinity for irq 30
[18332.587555] Broke affinity for irq 31
[18332.587558] Broke affinity for irq 32
[18332.587560] Broke affinity for irq 33
[18332.587563] Broke affinity for irq 35
[18332.588592] smpboot: CPU 3 is now offline
[18332.591976] ACPI: Low-level resume complete
[18332.592022] ACPI : EC: EC started
[18332.592022] PM: Restoring platform NVS memory
[18332.592317] Suspended for 2030.336 seconds
[18332.592379] Enabling non-boot CPUs ...
[18332.593036] x86: Booting SMP configuration:
[18332.593037] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18332.593312] Disabled fast string operations
[18332.595487]  cache: parent cpu1 should not be sleeping
[18332.801138] CPU1 is up
[18332.801781] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18332.802026] Disabled fast string operations
[18332.804193]  cache: parent cpu2 should not be sleeping
[18333.013111] CPU2 is up
[18333.013607] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18333.013851] Disabled fast string operations
[18333.016028]  cache: parent cpu3 should not be sleeping
[18333.233170] CPU3 is up
[18333.236120] ACPI: Waking up from system sleep state S3
[18333.480871] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229991930272608 new 18445229989899936094 attempts 1
[18334.029118] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[18334.040895] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[18334.040906] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[18334.040920] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18334.040983] PM: noirq resume of devices complete after 56.171 msecs
[18334.041392] PM: early resume of devices complete after 0.374 msecs
[18334.041475] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[18334.041766] usb usb1: root hub lost power or was reset
[18334.041768] usb usb2: root hub lost power or was reset
[18334.041771] ACPI : EC: event unblocked
[18334.042126] rtc_cmos 00:02: System wakeup disabled by ACPI
[18334.051859] sd 2:0:0:0: [sdb] Starting disk
[18334.051879] sd 0:0:0:0: [sda] Starting disk
[18334.300873] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[18334.399374] ata2: SATA link down (SStatus 0 SControl 300)
[18334.399403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18334.399513] ata5: SATA link down (SStatus 0 SControl 300)
[18334.399586] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18334.400052] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18334.400054] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18334.400055] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18334.400103] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18334.400105] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18334.400107] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18334.400157] ata1.00: supports DRM functions and may not be fully accessible
[18334.401746] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18334.401748] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18334.401750] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18334.402899] ata3.00: configured for UDMA/133
[18334.488789] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[18334.502347] ata1.00: NCQ Send/Recv Log not supported
[18334.503033] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18334.503039] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18334.503041] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18334.503181] ata1.00: supports DRM functions and may not be fully accessible
[18334.503289] ata1.00: NCQ Send/Recv Log not supported
[18334.503573] ata1.00: configured for UDMA/133
[18334.676762] usb 3-1.2: reset full-speed USB device number 12 using ehci-pci
[18334.791600] PM: resume of devices complete after 750.294 msecs
[18334.791688] usb 3-1.4:1.0: rebind failed: -517
[18334.791690] usb 3-1.4:1.1: rebind failed: -517
[18334.791851] PM: Finishing wakeup.
[18334.791853] Restarting tasks ... done.
[18334.842603] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[18334.954570] e1000e: enp0s25 NIC Link is Down
[18334.958874] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[18335.177104] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[18335.180863] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18335.183160] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[18335.183444] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[18335.183552] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[18335.473928] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[18335.474185] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[18335.474285] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[18335.559566] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18335.626997] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18341.771927] wlp3s0: authenticate with 2c:b2:1a:ff:a6:62
[18341.774483] wlp3s0: send auth to 2c:b2:1a:ff:a6:62 (try 1/3)
[18341.782618] wlp3s0: authenticated
[18341.787858] wlp3s0: associate with 2c:b2:1a:ff:a6:62 (try 1/3)
[18341.796761] wlp3s0: RX AssocResp from 2c:b2:1a:ff:a6:62 (capab=0x131 status=0 aid=4)
[18341.815731] wlp3s0: associated
[18341.815812] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[18341.846754] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:b2:1a:ff:a6:62
[18341.902948] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[18341.902959] /dev/vmnet: hub 0 does not exist, allocating memory.
[18341.902978] /dev/vmnet: port on hub 0 successfully opened
[18341.902986] bridge-wlp3s0: device is wireless, enabling SMAC
[18341.902988] bridge-wlp3s0: up
[18341.902991] bridge-wlp3s0: attached
[18342.104214] userif-3: sent link down event.
[18342.104218] userif-3: sent link up event.
[19982.806103] wlp3s0: deauthenticating from 2c:b2:1a:ff:a6:62 by local choice (Reason: 3=DEAUTH_LEAVING)
[19982.827251] bridge-wlp3s0: disabling the bridge on dev down
[19982.831490] bridge-wlp3s0: down
[19982.831505] bridge-wlp3s0: detached
[19983.027332] userif-3: sent link down event.
[19983.027335] userif-3: sent link up event.
[19987.794687] PM: Syncing filesystems ... done.
[19987.816099] PM: Preparing system for sleep (mem)
[19987.817378] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[19987.818204] Freezing user space processes ... (elapsed 0.003 seconds) done.
[19987.821755] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[19987.823145] PM: Suspending system (mem)
[19987.823174] Suspending console(s) (use no_console_suspend to debug)
[19987.823898] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19987.823984] sd 2:0:0:0: [sdb] Stopping disk
[19987.824132] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19987.826574] sd 0:0:0:0: [sda] Stopping disk
[19988.085241] e1000e: EEE TX LPI TIMER: 00000011
[19988.665425] PM: suspend of devices complete after 842.114 msecs
[19988.685512] PM: late suspend of devices complete after 20.073 msecs
[19988.688678] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[19988.688709] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[19988.688826] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[19988.688838] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[19988.737402] PM: noirq suspend of devices complete after 51.892 msecs
[19988.737645] ACPI: Preparing to enter system sleep state S3
[19989.081349] ACPI : EC: event blocked
[19989.081350] ACPI : EC: EC stopped
[19989.081352] PM: Saving platform NVS memory
[19989.081374] Disabling non-boot CPUs ...
[19989.105591] Broke affinity for irq 16
[19989.105596] Broke affinity for irq 29
[19989.105599] Broke affinity for irq 30
[19989.105601] Broke affinity for irq 31
[19989.105605] Broke affinity for irq 32
[19989.106632] smpboot: CPU 1 is now offline
[19989.129549] Broke affinity for irq 16
[19989.129565] Broke affinity for irq 29
[19989.129567] Broke affinity for irq 30
[19989.129570] Broke affinity for irq 31
[19989.129574] Broke affinity for irq 32
[19989.129577] Broke affinity for irq 35
[19989.130602] smpboot: CPU 2 is now offline
[19989.157486] Broke affinity for irq 1
[19989.157489] Broke affinity for irq 8
[19989.157491] Broke affinity for irq 9
[19989.157494] Broke affinity for irq 12
[19989.157496] Broke affinity for irq 16
[19989.157499] Broke affinity for irq 18
[19989.157502] Broke affinity for irq 23
[19989.157505] Broke affinity for irq 27
[19989.157507] Broke affinity for irq 28
[19989.157509] Broke affinity for irq 29
[19989.157511] Broke affinity for irq 30
[19989.157513] Broke affinity for irq 31
[19989.157516] Broke affinity for irq 32
[19989.157518] Broke affinity for irq 33
[19989.157520] Broke affinity for irq 35
[19989.158533] smpboot: CPU 3 is now offline
[19989.160994] ACPI: Low-level resume complete
[19989.161040] ACPI : EC: EC started
[19989.161041] PM: Restoring platform NVS memory
[19989.161334] Suspended for 20666.248 seconds
[19989.161395] Enabling non-boot CPUs ...
[19989.162045] x86: Booting SMP configuration:
[19989.162046] smpboot: Booting Node 0 Processor 1 APIC 0x1
[19989.162330] Disabled fast string operations
[19989.164493]  cache: parent cpu1 should not be sleeping
[19989.370899] CPU1 is up
[19989.371535] smpboot: Booting Node 0 Processor 2 APIC 0x2
[19989.371780] Disabled fast string operations
[19989.373949]  cache: parent cpu2 should not be sleeping
[19989.582868] CPU2 is up
[19989.583527] smpboot: Booting Node 0 Processor 3 APIC 0x3
[19989.583772] Disabled fast string operations
[19989.585929]  cache: parent cpu3 should not be sleeping
[19989.818956] CPU3 is up
[19989.821861] ACPI: Waking up from system sleep state S3
[19990.130632] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229989899936094 new 18445229969233687315 attempts 1
[19990.617549] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[19990.626714] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[19990.626715] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[19990.626787] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[19990.626834] PM: noirq resume of devices complete after 52.250 msecs
[19990.627163] PM: early resume of devices complete after 0.294 msecs
[19990.627241] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[19990.627436] ACPI : EC: event unblocked
[19990.627605] usb usb1: root hub lost power or was reset
[19990.627607] usb usb2: root hub lost power or was reset
[19990.627975] rtc_cmos 00:02: System wakeup disabled by ACPI
[19990.629471] sd 0:0:0:0: [sda] Starting disk
[19990.629523] sd 2:0:0:0: [sdb] Starting disk
[19990.882648] usb 3-1.2: reset full-speed USB device number 12 using ehci-pci
[19990.977002] ata5: SATA link down (SStatus 0 SControl 300)
[19990.977109] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[19990.977220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[19990.977432] ata2: SATA link down (SStatus 0 SControl 300)
[19990.977635] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[19990.977640] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[19990.977644] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[19990.977900] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[19990.977901] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[19990.977902] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[19990.978127] ata1.00: supports DRM functions and may not be fully accessible
[19990.979498] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[19990.979502] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[19990.979506] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[19990.980673] ata3.00: configured for UDMA/133
[19991.070547] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[19991.073984] ata1.00: NCQ Send/Recv Log not supported
[19991.074788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[19991.074790] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[19991.074791] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[19991.074987] ata1.00: supports DRM functions and may not be fully accessible
[19991.075138] ata1.00: NCQ Send/Recv Log not supported
[19991.075488] ata1.00: configured for UDMA/133
[19991.258542] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[19991.370261] PM: resume of devices complete after 743.175 msecs
[19991.370326] usb 3-1.4:1.0: rebind failed: -517
[19991.370328] usb 3-1.4:1.1: rebind failed: -517
[19991.370509] PM: Finishing wakeup.
[19991.370510] Restarting tasks ... done.
[19991.426003] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[19991.549169] e1000e: enp0s25 NIC Link is Down
[19991.553044] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[19991.768461] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[19991.770269] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19991.771670] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[19991.771924] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[19991.772021] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[19992.053484] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[19992.053756] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[19992.053855] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[19992.136971] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19992.202649] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19998.017554] wlp3s0: authenticate with 2c:b2:1a:ff:a6:62
[19998.019382] wlp3s0: send auth to 2c:b2:1a:ff:a6:62 (try 1/3)
[19998.027511] wlp3s0: authenticated
[19998.029745] wlp3s0: associate with 2c:b2:1a:ff:a6:62 (try 1/3)
[19998.038629] wlp3s0: RX AssocResp from 2c:b2:1a:ff:a6:62 (capab=0x131 status=0 aid=4)
[19998.057608] wlp3s0: associated
[19998.057693] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[19998.095091] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:b2:1a:ff:a6:62
[19998.141389] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[19998.141401] /dev/vmnet: hub 0 does not exist, allocating memory.
[19998.141422] /dev/vmnet: port on hub 0 successfully opened
[19998.141431] bridge-wlp3s0: device is wireless, enabling SMAC
[19998.141433] bridge-wlp3s0: up
[19998.141489] bridge-wlp3s0: attached
[19998.341290] userif-3: sent link down event.
[19998.341293] userif-3: sent link up event.
[20574.341071] wlp3s0: deauthenticating from 2c:b2:1a:ff:a6:62 by local choice (Reason: 3=DEAUTH_LEAVING)
[20574.361823] bridge-wlp3s0: disabling the bridge on dev down
[20574.361929] bridge-wlp3s0: down
[20574.361942] bridge-wlp3s0: detached
[20574.562505] userif-3: sent link down event.
[20574.562510] userif-3: sent link up event.
[20579.483951] PM: Syncing filesystems ... done.
[20579.511549] PM: Preparing system for sleep (mem)
[20579.513096] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[20579.513514] Freezing user space processes ... (elapsed 0.004 seconds) done.
[20579.517720] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[20579.519147] PM: Suspending system (mem)
[20579.519179] Suspending console(s) (use no_console_suspend to debug)
[20579.519926] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20579.520014] sd 2:0:0:0: [sdb] Stopping disk
[20579.520038] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[20579.525287] sd 0:0:0:0: [sda] Stopping disk
[20579.774557] e1000e: EEE TX LPI TIMER: 00000011
[20580.406718] PM: suspend of devices complete after 887.409 msecs
[20580.427022] PM: late suspend of devices complete after 20.301 msecs
[20580.427558] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[20580.428386] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[20580.428535] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[20580.428541] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[20580.478987] PM: noirq suspend of devices complete after 51.964 msecs
[20580.479657] ACPI: Preparing to enter system sleep state S3
[20580.822935] ACPI : EC: event blocked
[20580.822936] ACPI : EC: EC stopped
[20580.822937] PM: Saving platform NVS memory
[20580.822951] Disabling non-boot CPUs ...
[20580.847180] Broke affinity for irq 29
[20580.847191] Broke affinity for irq 30
[20580.847194] Broke affinity for irq 31
[20580.847198] Broke affinity for irq 32
[20580.847201] Broke affinity for irq 35
[20580.848457] smpboot: CPU 1 is now offline
[20580.871151] Broke affinity for irq 29
[20580.871154] Broke affinity for irq 30
[20580.871156] Broke affinity for irq 31
[20580.871159] Broke affinity for irq 32
[20580.871162] Broke affinity for irq 35
[20580.872416] smpboot: CPU 2 is now offline
[20580.903077] Broke affinity for irq 1
[20580.903081] Broke affinity for irq 8
[20580.903083] Broke affinity for irq 9
[20580.903086] Broke affinity for irq 12
[20580.903090] Broke affinity for irq 16
[20580.903101] Broke affinity for irq 18
[20580.903104] Broke affinity for irq 23
[20580.903107] Broke affinity for irq 27
[20580.903109] Broke affinity for irq 28
[20580.903111] Broke affinity for irq 29
[20580.903114] Broke affinity for irq 30
[20580.903116] Broke affinity for irq 31
[20580.903119] Broke affinity for irq 32
[20580.903121] Broke affinity for irq 33
[20580.903124] Broke affinity for irq 35
[20580.904146] smpboot: CPU 3 is now offline
[20580.906503] ACPI: Low-level resume complete
[20580.906551] ACPI : EC: EC started
[20580.906552] PM: Restoring platform NVS memory
[20580.906849] Suspended for 37659.192 seconds
[20580.906910] Enabling non-boot CPUs ...
[20580.907578] x86: Booting SMP configuration:
[20580.907578] smpboot: Booting Node 0 Processor 1 APIC 0x1
[20580.907862] Disabled fast string operations
[20580.910030]  cache: parent cpu1 should not be sleeping
[20580.916221] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229969233687315 new 18445229931574495334 attempts 1
[20581.116390] CPU1 is up
[20581.117041] smpboot: Booting Node 0 Processor 2 APIC 0x2
[20581.117287] Disabled fast string operations
[20581.119455]  cache: parent cpu2 should not be sleeping
[20581.328388] CPU2 is up
[20581.329065] smpboot: Booting Node 0 Processor 3 APIC 0x3
[20581.329310] Disabled fast string operations
[20581.331484]  cache: parent cpu3 should not be sleeping
[20581.564491] CPU3 is up
[20581.567436] ACPI: Waking up from system sleep state S3
[20582.360478] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[20582.368207] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[20582.368244] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[20582.368303] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[20582.368348] PM: noirq resume of devices complete after 52.239 msecs
[20582.368698] PM: early resume of devices complete after 0.310 msecs
[20582.368770] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[20582.368971] ACPI : EC: event unblocked
[20582.369119] usb usb1: root hub lost power or was reset
[20582.369121] usb usb2: root hub lost power or was reset
[20582.369445] rtc_cmos 00:02: System wakeup disabled by ACPI
[20582.370217] sd 0:0:0:0: [sda] Starting disk
[20582.370233] sd 2:0:0:0: [sdb] Starting disk
[20582.624074] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[20582.718511] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[20582.718741] ata5: SATA link down (SStatus 0 SControl 300)
[20582.718946] ata2: SATA link down (SStatus 0 SControl 300)
[20582.719081] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20582.719212] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[20582.719214] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[20582.719215] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20582.719888] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[20582.719890] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[20582.719891] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20582.720108] ata1.00: supports DRM functions and may not be fully accessible
[20582.721352] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[20582.721357] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[20582.721361] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20582.722639] ata3.00: configured for UDMA/133
[20582.812090] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[20582.823014] ata1.00: NCQ Send/Recv Log not supported
[20582.823743] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[20582.823744] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[20582.823746] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20582.823865] ata1.00: supports DRM functions and may not be fully accessible
[20582.823963] ata1.00: NCQ Send/Recv Log not supported
[20582.824254] ata1.00: configured for UDMA/133
[20583.214349] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[20585.346540] PM: resume of devices complete after 2978.160 msecs
[20585.346642] usb 3-1.4:1.0: rebind failed: -517
[20585.346644] usb 3-1.4:1.1: rebind failed: -517
[20585.346823] PM: Finishing wakeup.
[20585.346825] Restarting tasks ... 
[20585.347760] usb 3-1.2: USB disconnect, device number 12
[20585.378744] done.
[20585.431740] usb 4-1.1: new low-speed USB device number 3 using ehci-pci
[20585.543940] usb 4-1.1: New USB device found, idVendor=0461, idProduct=4d0f
[20585.543943] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20585.543945] usb 4-1.1: Product: USB Optical Mouse
[20585.543947] usb 4-1.1: Manufacturer: PixArt
[20585.547104] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:0461:4D0F.000A/input/input27
[20585.547854] hid-generic 0003:0461:4D0F.000A: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[20585.567468] e1000e: enp0s25 NIC Link is Down
[20585.571678] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[20585.788102] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[20585.789370] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20585.791535] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[20585.791799] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[20585.791897] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[20586.069910] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[20586.070185] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[20586.070292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[20586.156413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20586.243881] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20592.568606] wlp3s0: authenticate with 88:25:93:af:9d:ec
[20592.571952] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[20592.581074] wlp3s0: authenticated
[20592.583118] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[20592.587601] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=1)
[20592.620014] wlp3s0: associated
[20592.620101] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[20593.601265] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[20593.601281] /dev/vmnet: hub 0 does not exist, allocating memory.
[20593.601298] /dev/vmnet: port on hub 0 successfully opened
[20593.601308] bridge-wlp3s0: device is wireless, enabling SMAC
[20593.601310] bridge-wlp3s0: up
[20593.601314] bridge-wlp3s0: attached
[20593.801329] userif-3: sent link down event.
[20593.801332] userif-3: sent link up event.
[22443.793373] docker0: port 1(veth717feb0) entered blocking state
[22443.793376] docker0: port 1(veth717feb0) entered disabled state
[22443.793811] device veth717feb0 entered promiscuous mode
[22443.794250] IPv6: ADDRCONF(NETDEV_UP): veth717feb0: link is not ready
[22444.181181] eth0: renamed from veth5df9a63
[22444.208184] IPv6: ADDRCONF(NETDEV_CHANGE): veth717feb0: link becomes ready
[22444.208295] docker0: port 1(veth717feb0) entered blocking state
[22444.208297] docker0: port 1(veth717feb0) entered forwarding state
[22444.208465] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[22444.408902] userif-3: sent link down event.
[22444.408906] userif-3: sent link up event.
[22633.815215] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229931574495334 new 18445229931572283096 attempts 1
[34143.784546] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[34143.821640] bridge-wlp3s0: disabling the bridge on dev down
[34143.821669] bridge-wlp3s0: down
[34143.821683] bridge-wlp3s0: detached
[34143.821712] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[34143.821722] /dev/vmnet: hub 0 does not exist, allocating memory.
[34143.821743] /dev/vmnet: port on hub 0 successfully opened
[34143.821754] bridge-veth717feb0: up
[34143.821756] bridge-veth717feb0: attached
[34144.014837] userif-3: sent link down event.
[34144.014841] userif-3: sent link up event.
[34149.002151] PM: Syncing filesystems ... done.
[34149.079790] PM: Preparing system for sleep (mem)
[34149.080160] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[34149.080177] Freezing user space processes ... (elapsed 0.002 seconds) done.
[34149.082815] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[34149.084151] PM: Suspending system (mem)
[34149.084171] Suspending console(s) (use no_console_suspend to debug)
[34149.084647] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[34149.084768] sd 2:0:0:0: [sdb] Stopping disk
[34149.084894] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[34149.087848] sd 0:0:0:0: [sda] Stopping disk
[34149.347392] e1000e: EEE TX LPI TIMER: 00000011
[34149.895065] PM: suspend of devices complete after 810.836 msecs
[34149.915428] PM: late suspend of devices complete after 20.360 msecs
[34149.915934] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[34149.916820] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[34149.916947] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[34149.916950] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[34149.967332] PM: noirq suspend of devices complete after 51.903 msecs
[34149.967868] ACPI: Preparing to enter system sleep state S3
[34150.311282] ACPI : EC: event blocked
[34150.311284] ACPI : EC: EC stopped
[34150.311285] PM: Saving platform NVS memory
[34150.311307] Disabling non-boot CPUs ...
[34150.335690] Broke affinity for irq 16
[34150.335699] Broke affinity for irq 23
[34150.335707] Broke affinity for irq 29
[34150.335712] Broke affinity for irq 30
[34150.335718] Broke affinity for irq 31
[34150.335725] Broke affinity for irq 32
[34150.336758] smpboot: CPU 1 is now offline
[34150.359665] Broke affinity for irq 16
[34150.359678] Broke affinity for irq 23
[34150.359693] Broke affinity for irq 29
[34150.359698] Broke affinity for irq 30
[34150.359702] Broke affinity for irq 31
[34150.359708] Broke affinity for irq 32
[34150.359714] Broke affinity for irq 35
[34150.360921] smpboot: CPU 2 is now offline
[34150.391410] Broke affinity for irq 1
[34150.391413] Broke affinity for irq 8
[34150.391414] Broke affinity for irq 9
[34150.391416] Broke affinity for irq 12
[34150.391418] Broke affinity for irq 16
[34150.391421] Broke affinity for irq 18
[34150.391423] Broke affinity for irq 23
[34150.391426] Broke affinity for irq 27
[34150.391428] Broke affinity for irq 28
[34150.391429] Broke affinity for irq 29
[34150.391431] Broke affinity for irq 30
[34150.391432] Broke affinity for irq 31
[34150.391434] Broke affinity for irq 32
[34150.391436] Broke affinity for irq 33
[34150.391438] Broke affinity for irq 35
[34150.392451] smpboot: CPU 3 is now offline
[34150.394549] ACPI: Low-level resume complete
[34150.394594] ACPI : EC: EC started
[34150.394595] PM: Restoring platform NVS memory
[34150.394890] Suspended for 3706.815 seconds
[34150.394963] Enabling non-boot CPUs ...
[34150.395674] x86: Booting SMP configuration:
[34150.395675] smpboot: Booting Node 0 Processor 1 APIC 0x1
[34150.395953] Disabled fast string operations
[34150.398126]  cache: parent cpu1 should not be sleeping
[34150.504445] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229931572283096 new 18445229927865467177 attempts 1
[34150.608653] CPU1 is up
[34150.609350] smpboot: Booting Node 0 Processor 2 APIC 0x2
[34150.609595] Disabled fast string operations
[34150.611768]  cache: parent cpu2 should not be sleeping
[34150.820645] CPU2 is up
[34150.821349] smpboot: Booting Node 0 Processor 3 APIC 0x3
[34150.821594] Disabled fast string operations
[34150.823762]  cache: parent cpu3 should not be sleeping
[34151.056716] CPU3 is up
[34151.059665] ACPI: Waking up from system sleep state S3
[34151.852913] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[34151.860424] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[34151.860432] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[34151.860441] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[34151.860497] PM: noirq resume of devices complete after 52.084 msecs
[34151.860909] PM: early resume of devices complete after 0.370 msecs
[34151.860993] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[34151.861200] usb usb1: root hub lost power or was reset
[34151.861202] usb usb2: root hub lost power or was reset
[34151.861262] ACPI : EC: event unblocked
[34151.861579] rtc_cmos 00:02: System wakeup disabled by ACPI
[34151.871343] sd 0:0:0:0: [sda] Starting disk
[34151.871352] sd 2:0:0:0: [sdb] Starting disk
[34152.108364] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[34152.218950] ata5: SATA link down (SStatus 0 SControl 300)
[34152.218978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[34152.219078] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[34152.219099] ata2: SATA link down (SStatus 0 SControl 300)
[34152.219605] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[34152.219607] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[34152.219608] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[34152.219625] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[34152.219626] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[34152.219627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[34152.219730] ata1.00: supports DRM functions and may not be fully accessible
[34152.221321] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[34152.221323] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[34152.221324] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[34152.222470] ata3.00: configured for UDMA/133
[34152.296320] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[34152.324113] ata1.00: NCQ Send/Recv Log not supported
[34152.324935] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[34152.324937] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[34152.324938] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[34152.325135] ata1.00: supports DRM functions and may not be fully accessible
[34152.325311] ata1.00: NCQ Send/Recv Log not supported
[34152.325658] ata1.00: configured for UDMA/133
[34152.407110] PM: resume of devices complete after 546.257 msecs
[34152.407256] usb 3-1.4:1.0: rebind failed: -517
[34152.407258] usb 3-1.4:1.1: rebind failed: -517
[34152.407422] PM: Finishing wakeup.
[34152.407423] Restarting tasks ... done.
[34152.577204] e1000e: enp0s25 NIC Link is Down
[34152.582089] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[34152.659490] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[34152.800853] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[34152.804417] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34152.806126] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[34152.806448] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[34152.806556] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[34153.087320] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[34153.087600] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[34153.087702] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[34153.181815] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34153.236809] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34159.583804] wlp3s0: authenticate with 88:25:93:af:9f:d2
[34159.588490] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[34159.590629] wlp3s0: authenticated
[34159.591208] wlp3s0: waiting for beacon from 88:25:93:af:9f:d2
[34159.639459] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[34159.644125] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=19)
[34159.668818] wlp3s0: associated
[34159.668969] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[34160.657540] bridge-veth717feb0: disabling the bridge on dev down
[34160.657561] bridge-veth717feb0: down
[34160.657696] bridge-veth717feb0: detached
[34160.657732] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[34160.657741] /dev/vmnet: hub 0 does not exist, allocating memory.
[34160.657765] /dev/vmnet: port on hub 0 successfully opened
[34160.657774] bridge-wlp3s0: device is wireless, enabling SMAC
[34160.657777] bridge-wlp3s0: up
[34160.657780] bridge-wlp3s0: attached
[34160.856960] userif-3: sent link down event.
[34160.856963] userif-3: sent link up event.
[34185.432678] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:9d:ec
[34185.453355] wlp3s0: authenticate with 88:25:93:af:9d:ec
[34185.459295] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[34185.459941] bridge-wlp3s0: disabling the bridge on dev down
[34185.460294] bridge-wlp3s0: down
[34185.460307] bridge-wlp3s0: detached
[34185.460354] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[34185.460369] /dev/vmnet: hub 0 does not exist, allocating memory.
[34185.460400] /dev/vmnet: port on hub 0 successfully opened
[34185.460414] bridge-veth717feb0: up
[34185.460419] bridge-veth717feb0: attached
[34185.461482] wlp3s0: authenticated
[34185.468630] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[34185.473441] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=9)
[34185.500716] wlp3s0: associated
[34185.660158] userif-3: sent link down event.
[34185.660164] userif-3: sent link up event.
[34186.485220] bridge-veth717feb0: disabling the bridge on dev down
[34186.485327] bridge-veth717feb0: down
[34186.485347] bridge-veth717feb0: detached
[34186.485412] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[34186.485429] /dev/vmnet: hub 0 does not exist, allocating memory.
[34186.485482] /dev/vmnet: port on hub 0 successfully opened
[34186.485502] bridge-wlp3s0: device is wireless, enabling SMAC
[34186.485507] bridge-wlp3s0: up
[34186.485512] bridge-wlp3s0: attached
[34186.685332] userif-3: sent link down event.
[34186.685339] userif-3: sent link up event.
[47382.201677] deepin-system-m[17220]: segfault at 7fa8bb7ff000 ip 000056543eff73a2 sp 00007fa8bb7fd540 error 4 in deepin-system-monitor[56543ef99000+cb000]
[51008.545731] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[51008.576301] bridge-wlp3s0: disabling the bridge on dev down
[51008.576345] bridge-wlp3s0: down
[51008.576356] bridge-wlp3s0: detached
[51008.576649] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[51008.576659] /dev/vmnet: hub 0 does not exist, allocating memory.
[51008.576684] /dev/vmnet: port on hub 0 successfully opened
[51008.576694] bridge-veth717feb0: up
[51008.576697] bridge-veth717feb0: attached
[51008.772434] userif-3: sent link down event.
[51008.772437] userif-3: sent link up event.
[51010.691688] usb 4-1.1: USB disconnect, device number 3
[51012.690383] thinkpad_acpi: EC reports that Thermal Table has changed
[51013.681570] PM: Syncing filesystems ... done.
[51013.704392] PM: Preparing system for sleep (mem)
[51013.704860] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[51013.704877] Freezing user space processes ... (elapsed 0.122 seconds) done.
[51013.827787] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[51013.829636] PM: Suspending system (mem)
[51013.829682] Suspending console(s) (use no_console_suspend to debug)
[51013.830583] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[51013.830676] sd 2:0:0:0: [sdb] Stopping disk
[51013.830977] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[51013.831696] sd 0:0:0:0: [sda] Stopping disk
[51014.087317] e1000e: EEE TX LPI TIMER: 00000011
[51014.670249] PM: suspend of devices complete after 840.318 msecs
[51014.687675] PM: late suspend of devices complete after 17.405 msecs
[51014.691093] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[51014.691263] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[51014.691532] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[51014.691537] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[51014.742998] PM: noirq suspend of devices complete after 55.322 msecs
[51014.743661] ACPI: Preparing to enter system sleep state S3
[51015.086958] ACPI : EC: event blocked
[51015.086959] ACPI : EC: EC stopped
[51015.086961] PM: Saving platform NVS memory
[51015.086987] Disabling non-boot CPUs ...
[51015.111428] Broke affinity for irq 16
[51015.111438] Broke affinity for irq 23
[51015.111448] Broke affinity for irq 29
[51015.111455] Broke affinity for irq 30
[51015.111462] Broke affinity for irq 31
[51015.111470] Broke affinity for irq 32
[51015.112689] smpboot: CPU 1 is now offline
[51015.143143] Broke affinity for irq 16
[51015.143150] Broke affinity for irq 23
[51015.143156] Broke affinity for irq 29
[51015.143159] Broke affinity for irq 30
[51015.143161] Broke affinity for irq 31
[51015.143164] Broke affinity for irq 32
[51015.143166] Broke affinity for irq 35
[51015.144180] smpboot: CPU 2 is now offline
[51015.163230] Broke affinity for irq 1
[51015.163237] Broke affinity for irq 8
[51015.163241] Broke affinity for irq 9
[51015.163247] Broke affinity for irq 12
[51015.163252] Broke affinity for irq 16
[51015.163258] Broke affinity for irq 18
[51015.163263] Broke affinity for irq 23
[51015.163269] Broke affinity for irq 27
[51015.163273] Broke affinity for irq 28
[51015.163278] Broke affinity for irq 29
[51015.163282] Broke affinity for irq 30
[51015.163287] Broke affinity for irq 31
[51015.163292] Broke affinity for irq 32
[51015.163297] Broke affinity for irq 33
[51015.163301] Broke affinity for irq 35
[51015.164345] smpboot: CPU 3 is now offline
[51015.168856] ACPI: Low-level resume complete
[51015.168901] ACPI : EC: EC started
[51015.168902] PM: Restoring platform NVS memory
[51015.169197] Suspended for 52186.610 seconds
[51015.169257] Enabling non-boot CPUs ...
[51015.170180] x86: Booting SMP configuration:
[51015.170181] smpboot: Booting Node 0 Processor 1 APIC 0x1
[51015.170449] Disabled fast string operations
[51015.172620]  cache: parent cpu1 should not be sleeping
[51015.380828] CPU1 is up
[51015.381772] smpboot: Booting Node 0 Processor 2 APIC 0x2
[51015.382017] Disabled fast string operations
[51015.384190]  cache: parent cpu2 should not be sleeping
[51015.588827] CPU2 is up
[51015.589646] smpboot: Booting Node 0 Processor 3 APIC 0x3
[51015.589892] Disabled fast string operations
[51015.592063]  cache: parent cpu3 should not be sleeping
[51015.804879] CPU3 is up
[51015.807819] ACPI: Waking up from system sleep state S3
[51016.084544] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229927865467177 new 18445229875678857169 attempts 1
[51016.276743] thinkpad_acpi: EC reports that Thermal Table has changed
[51016.656680] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[51016.664621] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[51016.664658] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[51016.664729] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[51016.664779] PM: noirq resume of devices complete after 52.256 msecs
[51016.665160] PM: early resume of devices complete after 0.344 msecs
[51016.665243] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[51016.665502] usb usb1: root hub lost power or was reset
[51016.665504] usb usb2: root hub lost power or was reset
[51016.665505] ACPI : EC: event unblocked
[51016.666004] rtc_cmos 00:02: System wakeup disabled by ACPI
[51016.675563] sd 2:0:0:0: [sdb] Starting disk
[51016.675571] sd 0:0:0:0: [sda] Starting disk
[51016.912536] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[51017.023053] ata5: SATA link down (SStatus 0 SControl 300)
[51017.023080] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[51017.023222] ata2: SATA link down (SStatus 0 SControl 300)
[51017.023247] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[51017.023563] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[51017.023564] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[51017.023566] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[51017.023892] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[51017.023894] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[51017.023895] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[51017.024003] ata1.00: supports DRM functions and may not be fully accessible
[51017.025330] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[51017.025332] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[51017.025333] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[51017.026599] ata3.00: configured for UDMA/133
[51017.100491] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[51017.125935] ata1.00: NCQ Send/Recv Log not supported
[51017.126686] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[51017.126688] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[51017.126689] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[51017.126807] ata1.00: supports DRM functions and may not be fully accessible
[51017.126904] ata1.00: NCQ Send/Recv Log not supported
[51017.127189] ata1.00: configured for UDMA/133
[51017.211800] PM: resume of devices complete after 546.702 msecs
[51017.211886] usb 3-1.4:1.0: rebind failed: -517
[51017.211888] usb 3-1.4:1.1: rebind failed: -517
[51017.212122] PM: Finishing wakeup.
[51017.212124] Restarting tasks ... done.
[51017.292403] usb 4-1.1: new low-speed USB device number 4 using ehci-pci
[51017.404536] usb 4-1.1: New USB device found, idVendor=0461, idProduct=4d0f
[51017.404540] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[51017.404542] usb 4-1.1: Product: USB Optical Mouse
[51017.404543] usb 4-1.1: Manufacturer: PixArt
[51017.407648] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:0461:4D0F.000B/input/input28
[51017.407841] hid-generic 0003:0461:4D0F.000B: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[51017.422922] e1000e: enp0s25 NIC Link is Down
[51017.430642] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[51017.474491] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[51017.672673] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[51017.673666] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51017.675937] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[51017.676228] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[51017.676335] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[51017.955787] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[51017.956044] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[51017.956144] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[51018.044084] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51018.113443] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51024.537744] wlp3s0: authenticate with 88:25:93:af:9d:ec
[51024.540485] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[51024.542716] wlp3s0: authenticated
[51024.543545] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[51024.552757] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=5)
[51024.577239] wlp3s0: associated
[51024.577381] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[51025.565674] bridge-veth717feb0: disabling the bridge on dev down
[51025.566776] bridge-veth717feb0: down
[51025.566783] bridge-veth717feb0: detached
[51025.566819] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[51025.566827] /dev/vmnet: hub 0 does not exist, allocating memory.
[51025.566843] /dev/vmnet: port on hub 0 successfully opened
[51025.566850] bridge-wlp3s0: device is wireless, enabling SMAC
[51025.566852] bridge-wlp3s0: up
[51025.566855] bridge-wlp3s0: attached
[51025.766862] userif-3: sent link down event.
[51025.766864] userif-3: sent link up event.
[61780.865098] wlp3s0: disconnect from AP 88:25:93:af:9d:ec for new auth to 88:25:93:af:9f:d2
[61780.884803] wlp3s0: authenticate with 88:25:93:af:9f:d2
[61780.892267] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[61780.894119] bridge-wlp3s0: disabling the bridge on dev down
[61780.894665] wlp3s0: authenticated
[61780.894694] bridge-wlp3s0: down
[61780.894716] bridge-wlp3s0: detached
[61780.894783] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[61780.894800] /dev/vmnet: hub 0 does not exist, allocating memory.
[61780.894844] /dev/vmnet: port on hub 0 successfully opened
[61780.894863] bridge-veth717feb0: up
[61780.894868] bridge-veth717feb0: attached
[61780.898373] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[61780.911713] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=12)
[61780.939915] wlp3s0: associated
[61781.093944] userif-3: sent link down event.
[61781.093950] userif-3: sent link up event.
[61781.927588] bridge-veth717feb0: disabling the bridge on dev down
[61781.927617] bridge-veth717feb0: down
[61781.927624] bridge-veth717feb0: detached
[61781.927651] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[61781.927662] /dev/vmnet: hub 0 does not exist, allocating memory.
[61781.927680] /dev/vmnet: port on hub 0 successfully opened
[61781.927688] bridge-wlp3s0: device is wireless, enabling SMAC
[61781.927690] bridge-wlp3s0: up
[61781.927693] bridge-wlp3s0: attached
[61782.127719] userif-3: sent link down event.
[61782.127725] userif-3: sent link up event.
[61911.173851] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:9d:ec
[61911.218153] wlp3s0: authenticate with 88:25:93:af:9d:ec
[61911.224817] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[61911.225207] bridge-wlp3s0: disabling the bridge on dev down
[61911.225413] bridge-wlp3s0: down
[61911.225430] bridge-wlp3s0: detached
[61911.225473] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[61911.225488] /dev/vmnet: hub 0 does not exist, allocating memory.
[61911.225519] /dev/vmnet: port on hub 0 successfully opened
[61911.225533] bridge-veth717feb0: up
[61911.225537] bridge-veth717feb0: attached
[61911.227858] wlp3s0: authenticated
[61911.233269] wlp3s0: waiting for beacon from 88:25:93:af:9d:ec
[61911.320191] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[61911.324636] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=5)
[61911.349695] wlp3s0: associated
[61911.425561] userif-3: sent link down event.
[61911.425564] userif-3: sent link up event.
[61912.338785] bridge-veth717feb0: disabling the bridge on dev down
[61912.338917] bridge-veth717feb0: down
[61912.338934] bridge-veth717feb0: detached
[61912.338979] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[61912.338993] /dev/vmnet: hub 0 does not exist, allocating memory.
[61912.339029] /dev/vmnet: port on hub 0 successfully opened
[61912.339044] bridge-wlp3s0: device is wireless, enabling SMAC
[61912.339048] bridge-wlp3s0: up
[61912.339052] bridge-wlp3s0: attached
[61912.538934] userif-3: sent link down event.
[61912.538940] userif-3: sent link up event.
[64642.318368] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[64642.341115] bridge-wlp3s0: disabling the bridge on dev down
[64642.341201] bridge-wlp3s0: down
[64642.341212] bridge-wlp3s0: detached
[64642.341244] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[64642.341253] /dev/vmnet: hub 0 does not exist, allocating memory.
[64642.341277] /dev/vmnet: port on hub 0 successfully opened
[64642.341288] bridge-veth717feb0: up
[64642.341291] bridge-veth717feb0: attached
[64642.541173] userif-3: sent link down event.
[64642.541176] userif-3: sent link up event.
[64647.540383] PM: Syncing filesystems ... done.
[64647.568268] PM: Preparing system for sleep (mem)
[64647.568835] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[64647.568850] Freezing user space processes ... (elapsed 0.003 seconds) done.
[64647.572636] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[64647.573894] PM: Suspending system (mem)
[64647.573917] Suspending console(s) (use no_console_suspend to debug)
[64647.574585] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[64647.574677] sd 2:0:0:0: [sdb] Stopping disk
[64647.574878] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[64647.582331] sd 0:0:0:0: [sda] Stopping disk
[64647.834559] e1000e: EEE TX LPI TIMER: 00000011
[64648.425149] PM: suspend of devices complete after 851.152 msecs
[64648.441853] PM: late suspend of devices complete after 16.702 msecs
[64648.442502] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[64648.443480] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[64648.443568] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[64648.443570] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[64648.493656] PM: noirq suspend of devices complete after 51.804 msecs
[64648.494106] ACPI: Preparing to enter system sleep state S3
[64648.837628] ACPI : EC: event blocked
[64648.837628] ACPI : EC: EC stopped
[64648.837629] PM: Saving platform NVS memory
[64648.837642] Disabling non-boot CPUs ...
[64648.861839] Broke affinity for irq 16
[64648.861844] Broke affinity for irq 23
[64648.861849] Broke affinity for irq 29
[64648.861852] Broke affinity for irq 30
[64648.861855] Broke affinity for irq 31
[64648.861859] Broke affinity for irq 32
[64648.863073] smpboot: CPU 1 is now offline
[64648.881802] Broke affinity for irq 16
[64648.881809] Broke affinity for irq 23
[64648.881816] Broke affinity for irq 29
[64648.881818] Broke affinity for irq 30
[64648.881820] Broke affinity for irq 31
[64648.881823] Broke affinity for irq 32
[64648.881825] Broke affinity for irq 35
[64648.882838] smpboot: CPU 2 is now offline
[64648.905883] Broke affinity for irq 1
[64648.905888] Broke affinity for irq 8
[64648.905891] Broke affinity for irq 9
[64648.905895] Broke affinity for irq 12
[64648.905899] Broke affinity for irq 16
[64648.905903] Broke affinity for irq 18
[64648.905907] Broke affinity for irq 23
[64648.905912] Broke affinity for irq 27
[64648.905915] Broke affinity for irq 28
[64648.905918] Broke affinity for irq 29
[64648.905921] Broke affinity for irq 30
[64648.905924] Broke affinity for irq 31
[64648.905928] Broke affinity for irq 32
[64648.905931] Broke affinity for irq 33
[64648.905935] Broke affinity for irq 35
[64648.906963] smpboot: CPU 3 is now offline
[64648.910528] ACPI: Low-level resume complete
[64648.910574] ACPI : EC: EC started
[64648.910574] PM: Restoring platform NVS memory
[64648.910873] Suspended for 4039.540 seconds
[64648.910932] Enabling non-boot CPUs ...
[64648.911959] x86: Booting SMP configuration:
[64648.911959] smpboot: Booting Node 0 Processor 1 APIC 0x1
[64648.912228] Disabled fast string operations
[64648.914404]  cache: parent cpu1 should not be sleeping
[64648.927082] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229875678857169 new 18445229871639316450 attempts 1
[64649.119283] CPU1 is up
[64649.120279] smpboot: Booting Node 0 Processor 2 APIC 0x2
[64649.120525] Disabled fast string operations
[64649.122696]  cache: parent cpu2 should not be sleeping
[64649.327247] CPU2 is up
[64649.328245] smpboot: Booting Node 0 Processor 3 APIC 0x3
[64649.328489] Disabled fast string operations
[64649.330660]  cache: parent cpu3 should not be sleeping
[64649.543317] CPU3 is up
[64649.546263] ACPI: Waking up from system sleep state S3
[64650.339256] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[64650.347060] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[64650.347096] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[64650.347106] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[64650.347159] PM: noirq resume of devices complete after 52.124 msecs
[64650.347541] PM: early resume of devices complete after 0.338 msecs
[64650.347624] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[64650.347799] ACPI : EC: event unblocked
[64650.348004] usb usb1: root hub lost power or was reset
[64650.348006] usb usb2: root hub lost power or was reset
[64650.348200] rtc_cmos 00:02: System wakeup disabled by ACPI
[64650.358027] sd 0:0:0:0: [sda] Starting disk
[64650.358034] sd 2:0:0:0: [sdb] Starting disk
[64650.594981] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[64650.705555] ata2: SATA link down (SStatus 0 SControl 300)
[64650.705583] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[64650.705925] ata5: SATA link down (SStatus 0 SControl 300)
[64650.706238] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[64650.706240] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64650.706241] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64650.706344] ata1.00: supports DRM functions and may not be fully accessible
[64650.709490] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[64650.709976] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[64650.709978] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64650.709980] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64650.711633] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[64650.711635] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64650.711637] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64650.712779] ata3.00: configured for UDMA/133
[64650.782941] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[64650.809103] ata1.00: NCQ Send/Recv Log not supported
[64650.809918] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[64650.809923] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[64650.809927] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[64650.810053] ata1.00: supports DRM functions and may not be fully accessible
[64650.810377] ata1.00: NCQ Send/Recv Log not supported
[64650.810712] ata1.00: configured for UDMA/133
[64650.894175] PM: resume of devices complete after 546.693 msecs
[64650.894262] usb 3-1.4:1.0: rebind failed: -517
[64650.894264] usb 3-1.4:1.1: rebind failed: -517
[64650.894433] PM: Finishing wakeup.
[64650.894434] Restarting tasks ... done.
[64651.116959] e1000e: enp0s25 NIC Link is Down
[64651.123813] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[64651.147362] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[64651.355100] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[64651.356378] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[64651.358600] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[64651.358878] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[64651.358977] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[64651.637524] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[64651.637796] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[64651.637899] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[64651.723004] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[64651.806799] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[64658.237711] wlp3s0: authenticate with 88:25:93:af:9d:ec
[64658.244726] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[64658.246869] wlp3s0: authenticated
[64658.250035] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[64658.258036] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=11)
[64658.279430] wlp3s0: associated
[64658.279558] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[64659.268169] bridge-veth717feb0: disabling the bridge on dev down
[64659.268231] bridge-veth717feb0: down
[64659.268254] bridge-veth717feb0: detached
[64659.268359] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[64659.268385] /dev/vmnet: hub 0 does not exist, allocating memory.
[64659.268405] /dev/vmnet: port on hub 0 successfully opened
[64659.268424] bridge-wlp3s0: device is wireless, enabling SMAC
[64659.268429] bridge-wlp3s0: up
[64659.268433] bridge-wlp3s0: attached
[64659.467971] userif-3: sent link down event.
[64659.467974] userif-3: sent link up event.
[77588.455093] usb 4-1.1: USB disconnect, device number 4
[77588.710538] usb 4-1.1: new low-speed USB device number 5 using ehci-pci
[77588.823382] usb 4-1.1: New USB device found, idVendor=0461, idProduct=4d0f
[77588.823388] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[77588.823391] usb 4-1.1: Product: USB Optical Mouse
[77588.823394] usb 4-1.1: Manufacturer: PixArt
[77588.828417] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:0461:4D0F.000C/input/input29
[77588.829294] hid-generic 0003:0461:4D0F.000C: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[77597.378762] usb 3-1.2: new high-speed USB device number 13 using ehci-pci
[77597.489044] usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860
[77597.489051] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[77597.489054] usb 3-1.2: Product: SAMSUNG_Android
[77597.489056] usb 3-1.2: Manufacturer: SAMSUNG
[77597.489059] usb 3-1.2: SerialNumber: 64a44c5a
[77597.514882] cdc_acm 3-1.2:1.1: ttyACM0: USB ACM device
[77597.515525] usbcore: registered new interface driver cdc_acm
[77597.515527] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[79590.923259] usb 3-1.2: USB disconnect, device number 13
[79595.531528] usb 4-1.1: USB disconnect, device number 5
[79596.143390] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[79596.170943] bridge-wlp3s0: disabling the bridge on dev down
[79596.170970] bridge-wlp3s0: down
[79596.170980] bridge-wlp3s0: detached
[79596.171015] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[79596.171024] /dev/vmnet: hub 0 does not exist, allocating memory.
[79596.171044] /dev/vmnet: port on hub 0 successfully opened
[79596.171055] bridge-veth717feb0: up
[79596.171057] bridge-veth717feb0: attached
[79596.371089] userif-3: sent link down event.
[79596.371092] userif-3: sent link up event.
[79597.197959] thinkpad_acpi: EC reports that Thermal Table has changed
[79601.357273] PM: Syncing filesystems ... done.
[79601.550309] PM: Preparing system for sleep (mem)
[79601.551044] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[79601.551072] Freezing user space processes ... (elapsed 0.169 seconds) done.
[79601.720311] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[79601.722747] PM: Suspending system (mem)
[79601.722793] Suspending console(s) (use no_console_suspend to debug)
[79601.723522] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[79601.723623] sd 2:0:0:0: [sdb] Stopping disk
[79601.727836] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[79601.728466] sd 0:0:0:0: [sda] Stopping disk
[79601.982708] e1000e: EEE TX LPI TIMER: 00000011
[79602.529434] PM: suspend of devices complete after 806.381 msecs
[79602.550447] PM: late suspend of devices complete after 21.003 msecs
[79602.552159] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[79602.552243] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[79602.554041] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[79602.554269] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[79602.602171] PM: noirq suspend of devices complete after 51.721 msecs
[79602.602833] ACPI: Preparing to enter system sleep state S3
[79602.946139] ACPI : EC: event blocked
[79602.946140] ACPI : EC: EC stopped
[79602.946142] PM: Saving platform NVS memory
[79602.946168] Disabling non-boot CPUs ...
[79602.970620] Broke affinity for irq 16
[79602.970630] Broke affinity for irq 23
[79602.970639] Broke affinity for irq 29
[79602.970646] Broke affinity for irq 30
[79602.970653] Broke affinity for irq 31
[79602.970662] Broke affinity for irq 32
[79602.971930] smpboot: CPU 1 is now offline
[79602.998298] Broke affinity for irq 16
[79602.998304] Broke affinity for irq 23
[79602.998311] Broke affinity for irq 29
[79602.998313] Broke affinity for irq 30
[79602.998315] Broke affinity for irq 31
[79602.998318] Broke affinity for irq 32
[79602.998320] Broke affinity for irq 35
[79602.999333] smpboot: CPU 2 is now offline
[79603.026397] Broke affinity for irq 1
[79603.026403] Broke affinity for irq 8
[79603.026408] Broke affinity for irq 9
[79603.026413] Broke affinity for irq 12
[79603.026419] Broke affinity for irq 16
[79603.026424] Broke affinity for irq 18
[79603.026430] Broke affinity for irq 23
[79603.026436] Broke affinity for irq 27
[79603.026441] Broke affinity for irq 28
[79603.026446] Broke affinity for irq 29
[79603.026450] Broke affinity for irq 30
[79603.026454] Broke affinity for irq 31
[79603.026460] Broke affinity for irq 32
[79603.026464] Broke affinity for irq 33
[79603.026469] Broke affinity for irq 35
[79603.027513] smpboot: CPU 3 is now offline
[79603.032140] ACPI: Low-level resume complete
[79603.032185] ACPI : EC: EC started
[79603.032186] PM: Restoring platform NVS memory
[79603.032485] Suspended for 47033.353 seconds
[79603.032544] Enabling non-boot CPUs ...
[79603.033563] x86: Booting SMP configuration:
[79603.033564] smpboot: Booting Node 0 Processor 1 APIC 0x1
[79603.033839] Disabled fast string operations
[79603.036004]  cache: parent cpu1 should not be sleeping
[79603.243991] CPU1 is up
[79603.245038] smpboot: Booting Node 0 Processor 2 APIC 0x2
[79603.245284] Disabled fast string operations
[79603.247454]  cache: parent cpu2 should not be sleeping
[79603.451982] CPU2 is up
[79603.452994] smpboot: Booting Node 0 Processor 3 APIC 0x3
[79603.453239] Disabled fast string operations
[79603.455407]  cache: parent cpu3 should not be sleeping
[79603.672047] CPU3 is up
[79603.674990] ACPI: Waking up from system sleep state S3
[79603.791734] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229871639316450 new 18445229824605963100 attempts 1
[79604.143917] thinkpad_acpi: EC reports that Thermal Table has changed
[79604.524239] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[79604.531831] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[79604.531832] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[79604.531845] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[79604.531911] PM: noirq resume of devices complete after 52.207 msecs
[79604.532329] PM: early resume of devices complete after 0.380 msecs
[79604.532413] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[79604.532598] ACPI : EC: event unblocked
[79604.532735] usb usb1: root hub lost power or was reset
[79604.532737] usb usb2: root hub lost power or was reset
[79604.533151] rtc_cmos 00:02: System wakeup disabled by ACPI
[79604.542786] sd 0:0:0:0: [sda] Starting disk
[79604.542787] sd 2:0:0:0: [sdb] Starting disk
[79604.779720] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[79604.890344] ata5: SATA link down (SStatus 0 SControl 300)
[79604.890373] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[79604.890464] ata2: SATA link down (SStatus 0 SControl 300)
[79604.890489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[79604.890856] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[79604.890858] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[79604.890859] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[79604.891048] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[79604.891050] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[79604.891051] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[79604.891153] ata1.00: supports DRM functions and may not be fully accessible
[79604.892630] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[79604.892631] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[79604.892633] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[79604.893758] ata3.00: configured for UDMA/133
[79604.967688] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[79604.995742] ata1.00: NCQ Send/Recv Log not supported
[79604.996392] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[79604.996394] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[79604.996395] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[79604.996512] ata1.00: supports DRM functions and may not be fully accessible
[79604.996609] ata1.00: NCQ Send/Recv Log not supported
[79604.996891] ata1.00: configured for UDMA/133
[79605.078896] PM: resume of devices complete after 546.621 msecs
[79605.078984] usb 3-1.4:1.0: rebind failed: -517
[79605.078986] usb 3-1.4:1.1: rebind failed: -517
[79605.079228] PM: Finishing wakeup.
[79605.079229] Restarting tasks ... 
[79605.103676] usb 3-1.3: usbfs: process 28136 (fprintd) did not claim interface 0 before use
[79605.117440] done.
[79605.163596] usb 3-1.2: new full-speed USB device number 14 using ehci-pci
[79605.258974] e1000e: enp0s25 NIC Link is Down
[79605.263273] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[79605.275010] usb 3-1.2: New USB device found, idVendor=1d57, idProduct=fa60
[79605.275013] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[79605.275015] usb 3-1.2: Product: 2.4G Receiver
[79605.275016] usb 3-1.2: Manufacturer: Compx
[79605.277406] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1D57:FA60.000D/input/input30
[79605.339953] hid-generic 0003:1D57:FA60.000D: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
[79605.341851] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1D57:FA60.000E/input/input31
[79605.341886] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[79605.342337] hid-generic 0003:1D57:FA60.000E: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
[79605.345051] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:1D57:FA60.000F/input/input32
[79605.403745] hid-generic 0003:1D57:FA60.000F: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input2
[79605.495874] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[79605.497155] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79605.499386] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[79605.499932] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[79605.500030] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[79605.777672] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[79605.777939] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[79605.778033] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[79605.870481] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79605.936123] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79606.108577] deepin-notifica[23552]: segfault at 7f25e26bf728 ip 00007f25e26f397d sp 00007ffc9b2e4b90 error 7 in libdxcb.so[7f25e26c6000+5c000]
[79611.904112] wlp3s0: authenticate with 2c:b2:1a:ff:a6:62
[79611.909401] wlp3s0: send auth to 2c:b2:1a:ff:a6:62 (try 1/3)
[79611.987464] wlp3s0: authenticated
[79611.990884] wlp3s0: associate with 2c:b2:1a:ff:a6:62 (try 1/3)
[79611.999772] wlp3s0: RX AssocResp from 2c:b2:1a:ff:a6:62 (capab=0x131 status=0 aid=4)
[79612.019208] wlp3s0: associated
[79612.019317] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79612.081641] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:b2:1a:ff:a6:62
[79612.102295] bridge-veth717feb0: disabling the bridge on dev down
[79612.102317] bridge-veth717feb0: down
[79612.102324] bridge-veth717feb0: detached
[79612.102349] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[79612.102357] /dev/vmnet: hub 0 does not exist, allocating memory.
[79612.102373] /dev/vmnet: port on hub 0 successfully opened
[79612.102380] bridge-wlp3s0: device is wireless, enabling SMAC
[79612.102382] bridge-wlp3s0: up
[79612.102384] bridge-wlp3s0: attached
[79612.302304] userif-3: sent link down event.
[79612.302307] userif-3: sent link up event.
[80502.484290] usb 3-1.2: USB disconnect, device number 14
[80512.947230] usb 3-1.2: new full-speed USB device number 15 using ehci-pci
[80513.059350] usb 3-1.2: New USB device found, idVendor=1d57, idProduct=fa60
[80513.059358] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80513.059362] usb 3-1.2: Product: 2.4G Receiver
[80513.059365] usb 3-1.2: Manufacturer: Compx
[80513.063335] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1D57:FA60.0010/input/input33
[80513.124245] hid-generic 0003:1D57:FA60.0010: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
[80513.126996] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1D57:FA60.0011/input/input34
[80513.127647] hid-generic 0003:1D57:FA60.0011: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
[80513.131069] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:1D57:FA60.0012/input/input35
[80513.187827] hid-generic 0003:1D57:FA60.0012: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input2
[80516.050956] usb 3-1.2: USB disconnect, device number 15
[80516.478694] usb 3-1.2: new full-speed USB device number 16 using ehci-pci
[80516.590269] usb 3-1.2: New USB device found, idVendor=1d57, idProduct=fa60
[80516.590274] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80516.590277] usb 3-1.2: Product: 2.4G Receiver
[80516.590279] usb 3-1.2: Manufacturer: Compx
[80516.593192] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1D57:FA60.0013/input/input36
[80516.652302] hid-generic 0003:1D57:FA60.0013: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
[80516.655096] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1D57:FA60.0014/input/input37
[80516.656207] hid-generic 0003:1D57:FA60.0014: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
[80516.660094] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:1D57:FA60.0015/input/input38
[80516.719408] hid-generic 0003:1D57:FA60.0015: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input2
[82001.224662] wlp3s0: deauthenticating from 2c:b2:1a:ff:a6:62 by local choice (Reason: 3=DEAUTH_LEAVING)
[82001.250428] bridge-wlp3s0: disabling the bridge on dev down
[82001.250478] bridge-wlp3s0: down
[82001.250489] bridge-wlp3s0: detached
[82001.250514] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82001.250521] /dev/vmnet: hub 0 does not exist, allocating memory.
[82001.250530] /dev/vmnet: port on hub 0 successfully opened
[82001.250537] bridge-veth717feb0: up
[82001.250539] bridge-veth717feb0: attached
[82001.420984] userif-3: sent link down event.
[82001.420986] userif-3: sent link up event.
[82004.015815] usb 3-1.2: USB disconnect, device number 16
[82004.455935] usb 3-1.2: new full-speed USB device number 17 using ehci-pci
[82006.277800] PM: Syncing filesystems ... done.
[82006.337670] PM: Preparing system for sleep (mem)
[82006.338375] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[82006.338417] Freezing user space processes ... (elapsed 0.002 seconds) done.
[82006.341372] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[82006.342706] PM: Suspending system (mem)
[82006.342726] Suspending console(s) (use no_console_suspend to debug)
[82006.342978] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[82006.343052] sd 2:0:0:0: [sdb] Stopping disk
[82006.343323] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[82006.346797] sd 0:0:0:0: [sda] Stopping disk
[82006.660214] e1000e: EEE TX LPI TIMER: 00000011
[82007.192447] PM: suspend of devices complete after 849.660 msecs
[82007.211785] PM: late suspend of devices complete after 19.332 msecs
[82007.212595] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[82007.213453] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[82007.213555] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[82007.213558] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[82007.263687] PM: noirq suspend of devices complete after 51.900 msecs
[82007.264359] ACPI: Preparing to enter system sleep state S3
[82008.199631] ACPI : EC: event blocked
[82008.199640] ACPI : EC: EC stopped
[82008.199641] PM: Saving platform NVS memory
[82008.199654] Disabling non-boot CPUs ...
[82008.199731] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20160831/evregion-300)
[82008.199735] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.AC._PSR] (Node ffff9aba0d8b5bb8), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199738] ACPI Error: Method parse/execution failed [\_PR.CPU0._CST] (Node ffff9aba0d8dd168), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199782] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20160831/evregion-300)
[82008.199785] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.AC._PSR] (Node ffff9aba0d8b5bb8), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199788] ACPI Error: Method parse/execution failed [\_PR.CPU0._CST] (Node ffff9aba0d8dd168), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199848] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20160831/evregion-300)
[82008.199851] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.AC._PSR] (Node ffff9aba0d8b5bb8), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199853] ACPI Error: Method parse/execution failed [\_PR.CPU0._CST] (Node ffff9aba0d8dd168), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199856] ACPI Error: Method parse/execution failed [\_PR.CPU1._CST] (Node ffff9aba0d8a85a0), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199911] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20160831/evregion-300)
[82008.199914] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.AC._PSR] (Node ffff9aba0d8b5bb8), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199917] ACPI Error: Method parse/execution failed [\_PR.CPU0._CST] (Node ffff9aba0d8dd168), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199920] ACPI Error: Method parse/execution failed [\_PR.CPU2._CST] (Node ffff9aba0d8a8488), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199973] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20160831/evregion-300)
[82008.199976] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.AC._PSR] (Node ffff9aba0d8b5bb8), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199978] ACPI Error: Method parse/execution failed [\_PR.CPU0._CST] (Node ffff9aba0d8dd168), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.199981] ACPI Error: Method parse/execution failed [\_PR.CPU3._CST] (Node ffff9aba0d8a8e38), AE_BAD_PARAMETER (20160831/psparse-543)
[82008.224026] Broke affinity for irq 16
[82008.224035] Broke affinity for irq 23
[82008.224043] Broke affinity for irq 29
[82008.224048] Broke affinity for irq 30
[82008.224054] Broke affinity for irq 31
[82008.224061] Broke affinity for irq 32
[82008.225090] smpboot: CPU 1 is now offline
[82008.247781] Broke affinity for irq 16
[82008.247787] Broke affinity for irq 23
[82008.247794] Broke affinity for irq 29
[82008.247797] Broke affinity for irq 30
[82008.247799] Broke affinity for irq 31
[82008.247802] Broke affinity for irq 32
[82008.247805] Broke affinity for irq 35
[82008.248822] smpboot: CPU 2 is now offline
[82008.271866] Broke affinity for irq 1
[82008.271872] Broke affinity for irq 8
[82008.271876] Broke affinity for irq 9
[82008.271880] Broke affinity for irq 12
[82008.271885] Broke affinity for irq 16
[82008.271889] Broke affinity for irq 18
[82008.271894] Broke affinity for irq 23
[82008.271899] Broke affinity for irq 27
[82008.271904] Broke affinity for irq 28
[82008.271907] Broke affinity for irq 29
[82008.271911] Broke affinity for irq 30
[82008.271915] Broke affinity for irq 31
[82008.271919] Broke affinity for irq 32
[82008.271923] Broke affinity for irq 33
[82008.271928] Broke affinity for irq 35
[82008.272942] smpboot: CPU 3 is now offline
[82008.276428] ACPI: Low-level resume complete
[82008.276529] ACPI : EC: EC started
[82008.276530] PM: Restoring platform NVS memory
[82008.276895] Suspended for 4619.421 seconds
[82008.277029] Enabling non-boot CPUs ...
[82008.279584] x86: Booting SMP configuration:
[82008.279586] smpboot: Booting Node 0 Processor 1 APIC 0x1
[82008.280372] Disabled fast string operations
[82008.282767]  cache: parent cpu1 should not be sleeping
[82008.430379] CPU1 is up
[82008.432855] smpboot: Booting Node 0 Processor 2 APIC 0x2
[82008.433594] Disabled fast string operations
[82008.435970]  cache: parent cpu2 should not be sleeping
[82008.578413] CPU2 is up
[82008.580877] smpboot: Booting Node 0 Processor 3 APIC 0x3
[82008.581612] Disabled fast string operations
[82008.583963]  cache: parent cpu3 should not be sleeping
[82008.746692] CPU3 is up
[82008.754861] ACPI: Waking up from system sleep state S3
[82008.834006] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229824605963100 new 18445229819986541265 attempts 1
[82009.555188] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[82009.558193] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[82009.558263] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[82009.558306] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[82009.558516] PM: noirq resume of devices complete after 52.525 msecs
[82009.559437] PM: early resume of devices complete after 0.856 msecs
[82009.559608] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[82009.560051] usb usb1: root hub lost power or was reset
[82009.560057] usb usb2: root hub lost power or was reset
[82009.560131] ACPI : EC: event unblocked
[82009.560699] rtc_cmos 00:02: System wakeup disabled by ACPI
[82009.570159] sd 0:0:0:0: [sda] Starting disk
[82009.570189] sd 2:0:0:0: [sdb] Starting disk
[82009.805999] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[82009.928332] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[82009.928965] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[82009.929007] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[82009.929014] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[82009.929019] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[82009.929848] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[82009.929855] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[82009.929871] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[82009.930018] ata1.00: supports DRM functions and may not be fully accessible
[82009.931029] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[82009.931035] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[82009.931040] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[82009.932232] ata3.00: configured for UDMA/133
[82009.932629] ata5: SATA link down (SStatus 0 SControl 300)
[82009.932671] ata2: SATA link down (SStatus 0 SControl 300)
[82009.994012] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[82010.029377] ata1.00: NCQ Send/Recv Log not supported
[82010.030250] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[82010.030256] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[82010.030260] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[82010.030445] ata1.00: supports DRM functions and may not be fully accessible
[82010.030628] ata1.00: NCQ Send/Recv Log not supported
[82010.030980] ata1.00: configured for UDMA/133
[82010.105205] PM: resume of devices complete after 545.807 msecs
[82010.105354] usb 3-1.4:1.0: rebind failed: -517
[82010.105359] usb 3-1.4:1.1: rebind failed: -517
[82010.106064] PM: Finishing wakeup.
[82010.106067] Restarting tasks ... done.
[82010.185888] usb 4-1.1: new low-speed USB device number 6 using ehci-pci
[82010.298307] usb 4-1.1: New USB device found, idVendor=0461, idProduct=4d0f
[82010.298311] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[82010.298313] usb 4-1.1: Product: USB Optical Mouse
[82010.298314] usb 4-1.1: Manufacturer: PixArt
[82010.301589] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:0461:4D0F.0016/input/input39
[82010.301897] hid-generic 0003:0461:4D0F.0016: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[82010.305771] e1000e: enp0s25 NIC Link is Down
[82010.314974] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[82010.542173] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[82010.543238] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82010.545376] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[82010.545602] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[82010.545687] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[82010.824512] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[82010.824738] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[82010.824825] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[82010.907184] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82010.963320] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82010.996336] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[82017.391511] wlp3s0: authenticate with 88:25:93:af:9f:d2
[82017.397358] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[82017.401655] wlp3s0: authenticated
[82017.405246] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[82017.412314] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=7)
[82017.440068] wlp3s0: associated
[82017.440203] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[82018.422095] bridge-veth717feb0: disabling the bridge on dev down
[82018.422119] bridge-veth717feb0: down
[82018.422125] bridge-veth717feb0: detached
[82018.422156] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82018.422164] /dev/vmnet: hub 0 does not exist, allocating memory.
[82018.422182] /dev/vmnet: port on hub 0 successfully opened
[82018.422189] bridge-wlp3s0: device is wireless, enabling SMAC
[82018.422191] bridge-wlp3s0: up
[82018.422193] bridge-wlp3s0: attached
[82018.621581] userif-3: sent link down event.
[82018.621583] userif-3: sent link up event.
[82043.482525] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:9d:ec
[82043.500557] wlp3s0: authenticate with 88:25:93:af:9d:ec
[82043.503741] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[82043.505109] bridge-wlp3s0: disabling the bridge on dev down
[82043.505174] bridge-wlp3s0: down
[82043.505182] bridge-wlp3s0: detached
[82043.505206] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82043.505217] /dev/vmnet: hub 0 does not exist, allocating memory.
[82043.505233] /dev/vmnet: port on hub 0 successfully opened
[82043.505241] bridge-veth717feb0: up
[82043.505243] bridge-veth717feb0: attached
[82043.508203] wlp3s0: authenticated
[82043.510862] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[82043.515277] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=6)
[82043.541204] wlp3s0: associated
[82043.705274] userif-3: sent link down event.
[82043.705280] userif-3: sent link up event.
[82044.529484] bridge-veth717feb0: disabling the bridge on dev down
[82044.529547] bridge-veth717feb0: down
[82044.529565] bridge-veth717feb0: detached
[82044.529636] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82044.529660] /dev/vmnet: hub 0 does not exist, allocating memory.
[82044.529704] /dev/vmnet: port on hub 0 successfully opened
[82044.529724] bridge-wlp3s0: device is wireless, enabling SMAC
[82044.529730] bridge-wlp3s0: up
[82044.529735] bridge-wlp3s0: attached
[82044.729273] userif-3: sent link down event.
[82044.729281] userif-3: sent link up event.
[82241.207894] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[82241.241065] bridge-wlp3s0: disabling the bridge on dev down
[82241.241090] bridge-wlp3s0: down
[82241.241103] bridge-wlp3s0: detached
[82241.241157] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82241.241169] /dev/vmnet: hub 0 does not exist, allocating memory.
[82241.241192] /dev/vmnet: port on hub 0 successfully opened
[82241.241201] bridge-veth717feb0: up
[82241.241204] bridge-veth717feb0: attached
[82241.404013] userif-3: sent link down event.
[82241.404017] userif-3: sent link up event.
[82244.348755] wlp3s0: authenticate with b0:e2:35:c7:a2:b6
[82244.351947] wlp3s0: send auth to b0:e2:35:c7:a2:b6 (try 1/3)
[82244.425723] wlp3s0: send auth to b0:e2:35:c7:a2:b6 (try 2/3)
[82244.504987] wlp3s0: send auth to b0:e2:35:c7:a2:b6 (try 3/3)
[82244.540208] wlp3s0: authentication with b0:e2:35:c7:a2:b6 timed out
[82249.750659] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82251.727134] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82255.622300] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82259.963185] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82264.015296] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82274.779280] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82277.626696] wlp3s0: authenticate with 88:25:93:af:9f:d2
[82277.628120] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[82277.630633] wlp3s0: authenticated
[82277.630939] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[82277.637832] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=16)
[82277.662100] wlp3s0: associated
[82277.662222] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[82278.651421] bridge-veth717feb0: disabling the bridge on dev down
[82278.651483] bridge-veth717feb0: down
[82278.651490] bridge-veth717feb0: detached
[82278.651519] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82278.651531] /dev/vmnet: hub 0 does not exist, allocating memory.
[82278.651550] /dev/vmnet: port on hub 0 successfully opened
[82278.651559] bridge-wlp3s0: device is wireless, enabling SMAC
[82278.651561] bridge-wlp3s0: up
[82278.651563] bridge-wlp3s0: attached
[82278.851159] userif-3: sent link down event.
[82278.851163] userif-3: sent link up event.
[82280.835526] wlp3s0: deauthenticating from 88:25:93:af:9f:d2 by local choice (Reason: 3=DEAUTH_LEAVING)
[82280.875468] bridge-wlp3s0: disabling the bridge on dev down
[82280.875817] bridge-wlp3s0: down
[82280.875830] bridge-wlp3s0: detached
[82280.875878] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82280.875891] /dev/vmnet: hub 0 does not exist, allocating memory.
[82280.875912] /dev/vmnet: port on hub 0 successfully opened
[82280.875923] bridge-veth717feb0: up
[82280.875926] bridge-veth717feb0: attached
[82281.029578] userif-3: sent link down event.
[82281.029581] userif-3: sent link up event.
[82305.738122] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[82309.031465] wlp3s0: authenticate with 88:25:93:af:9d:ec
[82309.035967] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[82309.038244] wlp3s0: authenticated
[82309.043505] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[82309.047871] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=6)
[82309.070829] wlp3s0: associated
[82309.070968] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[82309.081330] bridge-veth717feb0: disabling the bridge on dev down
[82309.081496] bridge-veth717feb0: down
[82309.081504] bridge-veth717feb0: detached
[82309.081534] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82309.081543] /dev/vmnet: hub 0 does not exist, allocating memory.
[82309.081558] /dev/vmnet: port on hub 0 successfully opened
[82309.081564] bridge-wlp3s0: device is wireless, enabling SMAC
[82309.081566] bridge-wlp3s0: up
[82309.081568] bridge-wlp3s0: attached
[82309.280882] userif-3: sent link down event.
[82309.280885] userif-3: sent link up event.
[82320.584394] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[82320.612237] bridge-wlp3s0: disabling the bridge on dev down
[82320.612823] bridge-wlp3s0: down
[82320.612837] bridge-wlp3s0: detached
[82320.612871] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82320.612881] /dev/vmnet: hub 0 does not exist, allocating memory.
[82320.612899] /dev/vmnet: port on hub 0 successfully opened
[82320.612907] bridge-veth717feb0: up
[82320.612924] bridge-veth717feb0: attached
[82320.779600] userif-3: sent link down event.
[82320.779603] userif-3: sent link up event.
[82323.800169] wlp3s0: authenticate with b0:e2:35:c7:a2:b6
[82323.803476] wlp3s0: send auth to b0:e2:35:c7:a2:b6 (try 1/3)
[82323.806139] wlp3s0: authenticated
[82323.809879] wlp3s0: associate with b0:e2:35:c7:a2:b6 (try 1/3)
[82323.817627] wlp3s0: RX AssocResp from b0:e2:35:c7:a2:b6 (capab=0x431 status=0 aid=1)
[82323.819684] wlp3s0: associated
[82323.855612] bridge-veth717feb0: disabling the bridge on dev down
[82323.855714] bridge-veth717feb0: down
[82323.855721] bridge-veth717feb0: detached
[82323.855750] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[82323.855760] /dev/vmnet: hub 0 does not exist, allocating memory.
[82323.855776] /dev/vmnet: port on hub 0 successfully opened
[82323.855784] bridge-wlp3s0: device is wireless, enabling SMAC
[82323.855786] bridge-wlp3s0: up
[82323.855787] bridge-wlp3s0: attached
[82324.055389] userif-3: sent link down event.
[82324.055395] userif-3: sent link up event.
[82327.144549] userif-3: sent link down event.
[82327.144552] userif-3: sent link up event.
[83939.801934] userif-3: sent link down event.
[83939.801938] userif-3: sent link up event.
[84164.119134] thinkpad_acpi: EC reports that Thermal Table has changed
[85254.998988] userif-3: sent link down event.
[85254.998994] userif-3: sent link up event.
[86182.513338] wlp3s0: deauthenticating from b0:e2:35:c7:a2:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[86182.541133] bridge-wlp3s0: disabling the bridge on dev down
[86182.541462] bridge-wlp3s0: down
[86182.541482] bridge-wlp3s0: detached
[86182.541541] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[86182.541558] /dev/vmnet: hub 0 does not exist, allocating memory.
[86182.541597] /dev/vmnet: port on hub 0 successfully opened
[86182.541615] bridge-veth717feb0: up
[86182.541621] bridge-veth717feb0: attached
[86182.740534] userif-3: sent link down event.
[86182.740537] userif-3: sent link up event.
[86185.729619] wlp3s0: authenticate with 88:25:93:af:9d:ec
[86185.732559] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[86185.734714] wlp3s0: authenticated
[86185.738527] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[86185.745517] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=6)
[86185.769874] wlp3s0: associated
[86186.757458] bridge-veth717feb0: disabling the bridge on dev down
[86186.757649] bridge-veth717feb0: down
[86186.757899] bridge-veth717feb0: detached
[86186.757983] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[86186.757999] /dev/vmnet: hub 0 does not exist, allocating memory.
[86186.758038] /dev/vmnet: port on hub 0 successfully opened
[86186.758057] bridge-wlp3s0: device is wireless, enabling SMAC
[86186.758061] bridge-wlp3s0: up
[86186.758067] bridge-wlp3s0: attached
[86186.956596] userif-3: sent link down event.
[86186.956600] userif-3: sent link up event.
[88408.635847] [drm] GPU HANG: ecode 6:-1:0x00000000, reason: Kicking stuck semaphore on render ring, action: continue
[88408.635849] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[88408.635850] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[88408.635851] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[88408.635851] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[88408.635852] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[95385.185887] wlp3s0: deauthenticating from 88:25:93:af:9d:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[95385.304935] bridge-wlp3s0: disabling the bridge on dev down
[95385.304981] bridge-wlp3s0: down
[95385.305000] bridge-wlp3s0: detached
[95385.305061] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[95385.305080] /dev/vmnet: hub 0 does not exist, allocating memory.
[95385.305102] /dev/vmnet: port on hub 0 successfully opened
[95385.305122] bridge-veth717feb0: up
[95385.305128] bridge-veth717feb0: attached
[95385.504787] userif-3: sent link down event.
[95385.504790] userif-3: sent link up event.
[95390.387265] PM: Syncing filesystems ... done.
[95390.417405] PM: Preparing system for sleep (mem)
[95390.418105] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[95390.418134] Freezing user space processes ... (elapsed 0.003 seconds) done.
[95390.421910] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[95390.423452] PM: Suspending system (mem)
[95390.423476] Suspending console(s) (use no_console_suspend to debug)
[95390.424368] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[95390.424458] sd 2:0:0:0: [sdb] Stopping disk
[95390.426019] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[95390.430865] sd 0:0:0:0: [sda] Stopping disk
[95390.688608] e1000e: EEE TX LPI TIMER: 00000011
[95391.302445] PM: suspend of devices complete after 878.856 msecs
[95391.319386] PM: late suspend of devices complete after 16.939 msecs
[95391.322525] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[95391.322729] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[95391.322825] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[95391.322901] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[95391.371331] PM: noirq suspend of devices complete after 51.946 msecs
[95391.371663] ACPI: Preparing to enter system sleep state S3
[95391.715293] ACPI : EC: event blocked
[95391.715294] ACPI : EC: EC stopped
[95391.715295] PM: Saving platform NVS memory
[95391.715310] Disabling non-boot CPUs ...
[95391.739754] Broke affinity for irq 23
[95391.739771] Broke affinity for irq 29
[95391.739774] Broke affinity for irq 30
[95391.739778] Broke affinity for irq 31
[95391.739781] Broke affinity for irq 32
[95391.741053] smpboot: CPU 1 is now offline
[95391.759509] Broke affinity for irq 23
[95391.759517] Broke affinity for irq 29
[95391.759520] Broke affinity for irq 30
[95391.759523] Broke affinity for irq 31
[95391.759526] Broke affinity for irq 32
[95391.759529] Broke affinity for irq 35
[95391.760549] smpboot: CPU 2 is now offline
[95391.783454] Broke affinity for irq 1
[95391.783457] Broke affinity for irq 8
[95391.783460] Broke affinity for irq 9
[95391.783463] Broke affinity for irq 12
[95391.783466] Broke affinity for irq 16
[95391.783470] Broke affinity for irq 18
[95391.783473] Broke affinity for irq 23
[95391.783476] Broke affinity for irq 27
[95391.783479] Broke affinity for irq 28
[95391.783482] Broke affinity for irq 29
[95391.783484] Broke affinity for irq 30
[95391.783487] Broke affinity for irq 31
[95391.783490] Broke affinity for irq 32
[95391.783493] Broke affinity for irq 33
[95391.783496] Broke affinity for irq 35
[95391.784516] smpboot: CPU 3 is now offline
[95391.787424] ACPI: Low-level resume complete
[95391.787470] ACPI : EC: EC started
[95391.787470] PM: Restoring platform NVS memory
[95391.787769] Suspended for 3679.851 seconds
[95391.787831] Enabling non-boot CPUs ...
[95391.788835] x86: Booting SMP configuration:
[95391.788836] smpboot: Booting Node 0 Processor 1 APIC 0x1
[95391.789110] Disabled fast string operations
[95391.791280]  cache: parent cpu1 should not be sleeping
[95391.900643] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445229819986541265 new 18445229816306689574 attempts 1
[95391.996860] CPU1 is up
[95391.997830] smpboot: Booting Node 0 Processor 2 APIC 0x2
[95391.998075] Disabled fast string operations
[95392.000250]  cache: parent cpu2 should not be sleeping
[95392.204865] CPU2 is up
[95392.205679] smpboot: Booting Node 0 Processor 3 APIC 0x3
[95392.205924] Disabled fast string operations
[95392.208085]  cache: parent cpu3 should not be sleeping
[95392.420900] CPU3 is up
[95392.423849] ACPI: Waking up from system sleep state S3
[95393.217268] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[95393.224591] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[95393.224610] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[95393.224640] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[95393.224681] PM: noirq resume of devices complete after 52.133 msecs
[95393.225059] PM: early resume of devices complete after 0.343 msecs
[95393.225107] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[95393.225325] ACPI : EC: event unblocked
[95393.225421] usb usb1: root hub lost power or was reset
[95393.225423] usb usb2: root hub lost power or was reset
[95393.225684] rtc_cmos 00:02: System wakeup disabled by ACPI
[95393.235452] sd 0:0:0:0: [sda] Starting disk
[95393.235469] sd 2:0:0:0: [sdb] Starting disk
[95393.472652] usb 3-1.4: reset full-speed USB device number 5 using ehci-pci
[95393.583044] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[95393.583068] ata5: SATA link down (SStatus 0 SControl 300)
[95393.583296] ata2: SATA link down (SStatus 0 SControl 300)
[95393.583321] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[95393.583747] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95393.583749] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95393.583751] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95393.583792] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95393.583794] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95393.583795] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95393.583857] ata1.00: supports DRM functions and may not be fully accessible
[95393.585528] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95393.585530] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95393.585531] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95393.586683] ata3.00: configured for UDMA/133
[95393.660541] usb 3-1.3: reset full-speed USB device number 4 using ehci-pci
[95393.685421] ata1.00: NCQ Send/Recv Log not supported
[95393.686166] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95393.686167] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95393.686169] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95393.686292] ata1.00: supports DRM functions and may not be fully accessible
[95393.686386] ata1.00: NCQ Send/Recv Log not supported
[95393.686673] ata1.00: configured for UDMA/133
[95393.770162] PM: resume of devices complete after 545.156 msecs
[95393.770226] usb 3-1.4:1.0: rebind failed: -517
[95393.770228] usb 3-1.4:1.1: rebind failed: -517
[95393.770460] PM: Finishing wakeup.
[95393.770461] Restarting tasks ... done.
[95393.973326] e1000e: enp0s25 NIC Link is Down
[95393.979690] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95394.028907] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[95394.208927] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95394.210549] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95394.212610] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95394.212893] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95394.212998] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[95394.494575] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95394.494829] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95394.494924] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[95394.580769] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95394.657565] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95401.157808] wlp3s0: authenticate with 88:25:93:af:9d:ec
[95401.167478] wlp3s0: send auth to 88:25:93:af:9d:ec (try 1/3)
[95401.170975] wlp3s0: authenticated
[95401.175674] wlp3s0: associate with 88:25:93:af:9d:ec (try 1/3)
[95401.180046] wlp3s0: RX AssocResp from 88:25:93:af:9d:ec (capab=0x431 status=0 aid=14)
[95401.204421] wlp3s0: associated
[95401.204562] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[95401.213093] bridge-veth717feb0: disabling the bridge on dev down
[95401.213112] bridge-veth717feb0: down
[95401.213121] bridge-veth717feb0: detached
[95401.213154] /dev/vmnet: open called by PID 997 (vmnet-bridge)
[95401.213163] /dev/vmnet: hub 0 does not exist, allocating memory.
[95401.213181] /dev/vmnet: port on hub 0 successfully opened
[95401.213188] bridge-wlp3s0: device is wireless, enabling SMAC
[95401.213190] bridge-wlp3s0: up
[95401.213193] bridge-wlp3s0: attached
[95401.412866] userif-3: sent link down event.
[95401.412869] userif-3: sent link up event.
