[    0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[    0.000000] Linux version 4.9.0-deepin13-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP PREEMPT Deepin 4.9.57-1 (2017-10-19) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin13-amd64 root=UUID=e2a380f1-09b4-45e5-bc1f-e1a6b8e695cf ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8104fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8105000-0x00000000b810bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b810c000-0x00000000b893bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b893c000-0x00000000b8bedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9636fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9637000-0x00000000c97aafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9f57fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9f58000-0x00000000c9ffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xc9f56998  ACPI 2.0=0xc973f000  ACPI=0xc973f000  SMBIOS=0xf04d0  MPS=0xfd610 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Notebook                         W65_67SJ                        /W65_67SJ powered by premamod.com                        , BIO
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x32fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7F00000000 write-back
[    0.000000]   2 base 0300000000 mask 7FC0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable
[    0.000000]   6 base 00CB000000 mask 7FFF000000 uncachable
[    0.000000]   7 base 0330000000 mask 7FF0000000 uncachable
[    0.000000]   8 base 032FE00000 mask 7FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff9443000fd900]
[    0.000000] esrt: Reserving ESRT space from 0x00000000c9f56998 to 0x00000000c9f569d0.
[    0.000000] Base memory trampoline at [ffff944300097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x04724000, 0x04724fff] PGTABLE
[    0.000000] BRK [0x04725000, 0x04725fff] PGTABLE
[    0.000000] BRK [0x04726000, 0x04726fff] PGTABLE
[    0.000000] BRK [0x04727000, 0x04727fff] PGTABLE
[    0.000000] BRK [0x04728000, 0x04728fff] PGTABLE
[    0.000000] BRK [0x04729000, 0x04729fff] PGTABLE
[    0.000000] BRK [0x0472a000, 0x0472afff] PGTABLE
[    0.000000] BRK [0x0472b000, 0x0472bfff] PGTABLE
[    0.000000] BRK [0x0472c000, 0x0472cfff] PGTABLE
[    0.000000] BRK [0x0472d000, 0x0472dfff] PGTABLE
[    0.000000] BRK [0x0472e000, 0x0472efff] PGTABLE
[    0.000000] BRK [0x0472f000, 0x0472ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32e72000-0x35730fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C973F000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000C973F088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C97503C0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C973F1B8 011207 (v02 ALASKA A M I    00000034 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000C97AAF80 000040
[    0.000000] ACPI: APIC 0x00000000C97504D0 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000C9750568 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000C97505B0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 0x00000000C9750658 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C97515F0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9751B30 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000C9752608 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C9752648 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C9752680 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9752998 001C4D (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C97545E8 000F2E (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9755518 001C34 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000C9757150 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x32fdf9000-0x32fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000032fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b8104fff]
[    0.000000]   node   0: [mem 0x00000000b810c000-0x00000000b893bfff]
[    0.000000]   node   0: [mem 0x00000000b8bee000-0x00000000c8c0afff]
[    0.000000]   node   0: [mem 0x00000000c910b000-0x00000000c9636fff]
[    0.000000]   node   0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000032fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fdfffff]
[    0.000000] On node 0 totalpages: 3116060
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12794 pages used for memmap
[    0.000000]   DMA32 zone: 818815 pages, LIFO batch:31
[    0.000000]   Normal zone: 35832 pages used for memmap
[    0.000000]   Normal zone: 2293248 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8105000-0xb810bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb893c000-0xb8bedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8c0b000-0xc910afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9637000-0xc97aafff]
[    0.000000] PM: Registered nosave memory: [mem 0xc97ab000-0xc9f57fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9f58000-0xc9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff94462fa00000 s103896 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s103896 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3067346
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin13-amd64 root=UUID=e2a380f1-09b4-45e5-bc1f-e1a6b8e695cf ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 11931864K/12464240K available (6268K kernel code, 1142K rwdata, 2868K rodata, 1348K init, 688K bss, 532376K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.421 MHz processor
[    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.84 BogoMIPS (lpj=9977684)
[    0.000020] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20160831
[    0.008852] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.009314] Security Framework initialized
[    0.009314] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009318] AppArmor: AppArmor disabled by boot time parameter
[    0.009931] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.012129] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013082] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013093] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013336] CPU: Physical Processor ID: 0
[    0.013336] CPU: Processor Core ID: 0
[    0.013339] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013340] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013343] mce: CPU supports 9 MCE banks
[    0.013350] CPU0: Thermal monitoring enabled (TM1)
[    0.013361] process: using mwait in idle threads
[    0.013364] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.013364] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.013603] Freeing SMP alternatives memory: 24K
[    0.029121] ftrace: allocating 25177 entries in 99 pages
[    0.036244] smpboot: Max logical packages: 2
[    0.036568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.076254] TSC deadline timer enabled
[    0.076257] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.076260] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.076286] ... version:                3
[    0.076286] ... bit width:              48
[    0.076287] ... generic registers:      4
[    0.076287] ... value mask:             0000ffffffffffff
[    0.076288] ... max period:             00007fffffffffff
[    0.076288] ... fixed-purpose events:   3
[    0.076288] ... event mask:             000000070000000f
[    0.116429] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.156408] x86: Booting SMP configuration:
[    0.156409] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.351124] x86: Booted up 1 node, 8 CPUs
[    0.351126] smpboot: Total of 8 processors activated (39910.73 BogoMIPS)
[    0.357083] devtmpfs: initialized
[    0.357132] x86/mm: Memory block size: 128MB
[    0.359109] PM: Registering ACPI NVS region [mem 0xb8105000-0xb810bfff] (28672 bytes)
[    0.359110] PM: Registering ACPI NVS region [mem 0xc9637000-0xc97aafff] (1523712 bytes)
[    0.359182] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.359193] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.359236] pinctrl core: initialized pinctrl subsystem
[    0.359320] NET: Registered protocol family 16
[    0.372790] cpuidle: using governor ladder
[    0.388794] cpuidle: using governor menu
[    0.388816] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.388817] ACPI: bus type PCI registered
[    0.388818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.388881] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.388882] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.388889] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.388945] PCI: Using configuration type 1 for base access
[    0.388994] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.404903] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.404904] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.405119] ACPI: Added _OSI(Module Device)
[    0.405120] ACPI: Added _OSI(Processor Device)
[    0.405121] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.405122] ACPI: Added _OSI(Processor Aggregator Device)
[    0.405294] ACPI: Executed 1 blocks of module-level executable AML code
[    0.410135] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.410607] ACPI: Dynamic OEM Table Load:
[    0.410612] ACPI: SSDT 0xFFFF944621134800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.410906] ACPI: Dynamic OEM Table Load:
[    0.410910] ACPI: SSDT 0xFFFF944621176000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.411267] ACPI: Dynamic OEM Table Load:
[    0.411272] ACPI: SSDT 0xFFFF9446211F3E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.412897] ACPI : EC: EC started
[    0.412898] ACPI : EC: interrupt blocked
[    0.413355] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.413356] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.413357] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.413358] ACPI: Interpreter enabled
[    0.413384] ACPI: (supports S0 S3 S4 S5)
[    0.413385] ACPI: Using IOAPIC for interrupt routing
[    0.413412] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.420297] ACPI: Power Resource [NVP3] (on)
[    0.420318] ACPI: Power Resource [NVP2] (on)
[    0.422326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.422330] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.422461] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.422564] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.422564] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.422958] PCI host bridge to bus 0000:00
[    0.422960] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.422961] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.422961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.422962] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.422963] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.422968] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.423051] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.423077] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.423152] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.423185] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.423192] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.423196] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.423199] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.423272] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.423277] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[    0.423371] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.423386] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[    0.423438] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.423477] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.423506] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.423522] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[    0.423577] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.423650] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.423664] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[    0.423738] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.423789] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.423820] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.423833] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[    0.423884] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.423926] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.423955] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.424011] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.424079] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.424109] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.424165] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.424232] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.424262] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.424318] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.424383] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.424419] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.424434] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[    0.424508] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.424558] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.424589] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.424742] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.424753] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.424760] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.424766] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.424772] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.424779] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.424785] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[    0.424820] pci 0000:00:1f.2: PME# supported from D3hot
[    0.424885] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.424897] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[    0.424915] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.425027] pci 0000:01:00.0: [10de:1391] type 00 class 0x030200
[    0.425034] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.425040] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.425047] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.425051] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.425055] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.425142] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.436824] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.436826] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.436828] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.436831] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.436895] acpiphp: Slot [1] registered
[    0.436900] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.437009] pci 0000:03:00.0: [14e4:43b1] type 00 class 0x028000
[    0.437031] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
[    0.437046] pci 0000:03:00.0: reg 0x18: [mem 0xf7800000-0xf79fffff 64bit]
[    0.437154] pci 0000:03:00.0: supports D1 D2
[    0.437155] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437205] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.448870] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.448875] pci 0000:00:1c.2:   bridge window [mem 0xf7800000-0xf7afffff]
[    0.448958] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
[    0.448977] pci 0000:04:00.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff]
[    0.449119] pci 0000:04:00.0: supports D1 D2
[    0.449120] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.449163] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.449209] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
[    0.449228] pci 0000:04:00.2: reg 0x10: [io  0xd000-0xd0ff]
[    0.449256] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.449274] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.449355] pci 0000:04:00.2: supports D1 D2
[    0.449356] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.449394] pci 0000:04:00.2: System wakeup disabled by ACPI
[    0.460850] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.460853] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.460856] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.460861] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.461720] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.461767] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.461814] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.461860] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.461905] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.461949] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.461995] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.462040] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.462275] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.462316] ACPI : EC: interrupt unblocked
[    0.462320] ACPI : EC: event unblocked
[    0.462326] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.462327] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.462453] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.462454] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.462456] vgaarb: loaded
[    0.462456] vgaarb: bridge control possible 0000:00:02.0
[    0.462476] Registered efivars operations
[    0.473127] PCI: Using ACPI for IRQ routing
[    0.474404] PCI: pci_cache_line_size set to 64 bytes
[    0.474514] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.474514] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.474515] e820: reserve RAM buffer [mem 0xb8105000-0xbbffffff]
[    0.474516] e820: reserve RAM buffer [mem 0xb893c000-0xbbffffff]
[    0.474516] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff]
[    0.474517] e820: reserve RAM buffer [mem 0xc9637000-0xcbffffff]
[    0.474518] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.474519] e820: reserve RAM buffer [mem 0x32fe00000-0x32fffffff]
[    0.474629] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.474633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.476650] clocksource: Switched to clocksource hpet
[    0.481763] VFS: Disk quotas dquot_6.6.0
[    0.481783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.481850] pnp: PnP ACPI init
[    0.481926] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.481929] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.482164] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.482166] system 00:01: [io  0xffff] has been reserved
[    0.482167] system 00:01: [io  0xffff] has been reserved
[    0.482168] system 00:01: [io  0xffff] has been reserved
[    0.482169] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.482170] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.482171] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.482172] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.482173] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.482174] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.482175] system 00:01: [io  0x3322-0x3323] has been reserved
[    0.482177] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482196] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.482235] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.482237] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.482259] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.482316] pnp 00:05: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
[    0.482367] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.482369] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482731] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.482733] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.482734] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.482735] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.482736] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.482737] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.482738] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.482739] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.482740] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.482741] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.482742] system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved
[    0.482744] system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[    0.482745] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482931] pnp: PnP ACPI: found 8 devices
[    0.488773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.488798] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.488799] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.488801] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.488803] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.488806] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.488814] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.488818] pci 0000:00:1c.2:   bridge window [mem 0xf7800000-0xf7afffff]
[    0.488824] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.488826] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.488830] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.488833] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.488838] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.488839] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.488840] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.488840] pci_bus 0000:00: resource 7 [mem 0xcf200000-0xfeafffff window]
[    0.488841] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.488842] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.488843] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.488844] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf7afffff]
[    0.488845] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.488845] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.488846] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.488961] NET: Registered protocol family 2
[    0.489120] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.489258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.489364] TCP: Hash tables configured (established 131072 bind 65536)
[    0.489382] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.489416] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.489478] NET: Registered protocol family 1
[    0.489488] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.489936] PCI: CLS 64 bytes, default 64
[    0.489971] Unpacking initramfs...
[    0.954539] Freeing initrd memory: 41724K
[    0.954542] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.954544] software IO TLB [mem 0xb4105000-0xb8105000] (64MB) mapped at [ffff9443b4105000-ffff9443b8104fff]
[    0.954878] audit: initializing netlink subsys (disabled)
[    0.954892] audit: type=2000 audit(1513103108.940:1): initialized
[    0.955191] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.955248] zbud: loaded
[    0.955752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.955776] io scheduler noop registered
[    0.955777] io scheduler deadline registered
[    0.955786] io scheduler cfq registered (default)
[    0.956284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.956288] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.956299] efifb: probing for efifb
[    0.956313] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
[    0.956314] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.956314] efifb: scrolling: redraw
[    0.956316] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.959335] Console: switching to colour frame buffer device 240x67
[    0.962137] fb0: EFI VGA frame buffer device
[    0.962142] intel_idle: disabled
[    0.962385] Monitor-Mwait will be used to enter C-1 state
[    0.962387] Monitor-Mwait will be used to enter C-2 state
[    0.963353] GHES: HEST is not enabled!
[    0.963387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.963666] Linux agpgart interface v0.103
[    0.963716] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.963717] AMD IOMMUv2 functionality not available on this system
[    0.964156] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
[    0.968141] i8042: Detected active multiplexing controller, rev 1.1
[    0.969780] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.969803] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.969821] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.969838] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.969855] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.969920] mousedev: PS/2 mouse device common for all mice
[    0.969951] rtc_cmos 00:02: RTC can wake from S4
[    0.970058] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.970080] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.970166] ledtrig-cpu: registered to indicate activity on CPUs
[    0.970436] NET: Registered protocol family 10
[    0.970710] mip6: Mobile IPv6
[    0.970711] NET: Registered protocol family 17
[    0.970713] mpls_gso: MPLS GSO support
[    0.970908] microcode: sig=0x306c3, pf=0x10, revision=0x22
[    0.971029] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.971112] registered taskstats version 1
[    0.971125] zswap: loaded using pool lzo/zbud
[    0.971240] ima: No TPM chip found, activating TPM-bypass!
[    0.971739] rtc_cmos 00:02: setting system clock to 2017-12-12 18:25:09 UTC (1513103109)
[    0.971797] PM: Hibernation image not present or could not be loaded.
[    0.972582] Freeing unused kernel memory: 1348K
[    0.972582] Write protecting the kernel read-only data: 12288k
[    0.972910] Freeing unused kernel memory: 1908K
[    0.973092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.974710] Freeing unused kernel memory: 1228K
[    0.978379] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.007222] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.007225] ACPI: Power Button [PWRB]
[    1.007261] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.007262] ACPI: Sleep Button [SLPB]
[    1.007347] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    1.007386] ACPI: Lid Switch [LID0]
[    1.007432] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.007433] ACPI: Power Button [PWRF]
[    1.008256] hidraw: raw HID events driver (C) Jiri Kosina
[    1.009918] wmi: Mapper loaded
[    1.009960] sdhci: Secure Digital Host Controller Interface driver
[    1.009961] sdhci: Copyright(c) Pierre Ossman
[    1.013382] thermal LNXTHERM:00: registered as thermal_zone0
[    1.013383] ACPI: Thermal Zone [TZ0] (97 C)
[    1.014742] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[    1.015052] [drm] Initialized
[    1.015470] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.015476] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.015740] ACPI: bus type USB registered
[    1.015755] usbcore: registered new interface driver usbfs
[    1.015762] usbcore: registered new interface driver hub
[    1.015793] usbcore: registered new device driver usb
[    1.016185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.016256] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffb3ac418c5000, 80:fa:5b:0d:ef:6f, XID 08800800 IRQ 26
[    1.016257] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.016670] ehci-pci: EHCI PCI platform driver
[    1.016798] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.016804] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.016816] ehci-pci 0000:00:1a.0: debug port 2
[    1.017395] SCSI subsystem initialized
[    1.019921] libata version 3.00 loaded.
[    1.020709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.020723] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[    1.022833] AVX2 version of gcm_enc/dec engaged.
[    1.022835] AES CTR mode by8 optimization enabled
[    1.030043] r8169 0000:04:00.2 enp4s0f2: renamed from eth0
[    1.036683] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.036935] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.036947] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036948] usb usb1: Product: EHCI Host Controller
[    1.036949] usb usb1: Manufacturer: Linux 4.9.0-deepin13-amd64 ehci_hcd
[    1.036949] usb usb1: SerialNumber: 0000:00:1a.0
[    1.037179] hub 1-0:1.0: USB hub found
[    1.037208] hub 1-0:1.0: 2 ports detected
[    1.037649] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.037654] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.037664] ehci-pci 0000:00:1d.0: debug port 2
[    1.041579] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.041588] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[    1.056678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.056729] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.056731] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.056732] usb usb2: Product: EHCI Host Controller
[    1.056733] usb usb2: Manufacturer: Linux 4.9.0-deepin13-amd64 ehci_hcd
[    1.056733] usb usb2: SerialNumber: 0000:00:1d.0
[    1.056951] hub 2-0:1.0: USB hub found
[    1.056957] hub 2-0:1.0: 2 ports detected
[    1.057246] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.057270] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.058514] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.058520] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.059600] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.059603] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.059744] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.059745] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.059746] usb usb3: Product: xHCI Host Controller
[    1.059747] usb usb3: Manufacturer: Linux 4.9.0-deepin13-amd64 xhci-hcd
[    1.059747] usb usb3: SerialNumber: 0000:00:14.0
[    1.059844] hub 3-0:1.0: USB hub found
[    1.059864] hub 3-0:1.0: 14 ports detected
[    1.062243] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.062246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.062460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.062461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.062462] usb usb4: Product: xHCI Host Controller
[    1.062463] usb usb4: Manufacturer: Linux 4.9.0-deepin13-amd64 xhci-hcd
[    1.062463] usb usb4: SerialNumber: 0000:00:14.0
[    1.062573] hub 4-0:1.0: USB hub found
[    1.062584] hub 4-0:1.0: 4 ports detected
[    1.063149] [drm] Memory usable by graphics device = 2048M
[    1.063151] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    1.063152] fb: switching to inteldrmfb from EFI VGA
[    1.063168] Console: switching to colour dummy device 80x25
[    1.063278] [drm] Replacing VGA console driver
[    1.068711] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.068713] [drm] Driver supports precise vblank timestamp query.
[    1.071110] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.078557] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.078593] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.078739] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input9
[    1.078803] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.078935] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[    1.078959] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.078981] ahci 0000:00:1f.2: version 3.0
[    1.079140] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.079169] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
[    1.079170] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst 
[    1.090701] fbcon: inteldrmfb (fb0) is primary device
[    1.113889] scsi host0: ahci
[    1.114127] scsi host1: ahci
[    1.114301] scsi host2: ahci
[    1.114452] scsi host3: ahci
[    1.114545] scsi host4: ahci
[    1.114640] scsi host5: ahci
[    1.114690] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 29
[    1.114691] ata2: DUMMY
[    1.114693] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 29
[    1.114693] ata4: DUMMY
[    1.114695] ata5: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a300 irq 29
[    1.114696] ata6: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a380 irq 29
[    1.364666] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.384666] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.388659] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[    1.428239] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.432033] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, CH00, max UDMA/100
[    1.436869] ata1.00: configured for UDMA/100
[    1.513053] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.513054] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.513416] hub 1-1:1.0: USB hub found
[    1.513476] hub 1-1:1.0: 6 ports detected
[    1.530689] usb 3-6: New USB device found, idVendor=09da, idProduct=054f
[    1.530691] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.530692] usb 3-6: Product: USB Device
[    1.530693] usb 3-6: Manufacturer: A4TECH
[    1.532975] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.532976] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.533129] hub 2-1:1.0: USB hub found
[    1.533223] hub 2-1:1.0: 8 ports detected
[    1.534513] usbcore: registered new interface driver usbhid
[    1.534514] usbhid: USB HID core driver
[    1.535207] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:09DA:054F.0001/input/input13
[    1.648595] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.664447] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-6/input0
[    1.664533] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:09DA:054F.0002/input/input14
[    1.664716] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-6/input1
[    1.791675] usb 3-7: New USB device found, idVendor=0a5c, idProduct=21fb
[    1.791677] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.791678] usb 3-7: Product: BCM20702A0
[    1.791679] usb 3-7: Manufacturer: Broadcom Corp
[    1.791680] usb 3-7: SerialNumber: 240A6403AEA9
[    1.908622] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[    1.928893] psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[    2.014269] tsc: Refined TSC clocksource calibration: 2494.223 MHz
[    2.014273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns
[    2.027819] psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
[    2.118793] usb 3-8: New USB device found, idVendor=04f2, idProduct=b43b
[    2.118794] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.118795] usb 3-8: Product: Chicony USB 2.0 Camera
[    2.118796] usb 3-8: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.118797] usb 3-8: SerialNumber: 0x0001
[    2.126762] psmouse serio2: elantech: Elan sample query result 03, 4d, 85
[    2.252614] random: fast init done
[    2.455306] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input12
[    2.463214] Console: switching to colour frame buffer device 240x67
[    2.482729] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.499093] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  CH00 PQ: 0 ANSI: 5
[    2.823769] ata3: SATA link down (SStatus 0 SControl 300)
[    3.016681] clocksource: Switched to clocksource tsc
[    3.139666] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.141734] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.141737] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.141738] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.141992] ata5.00: ATA-8: LITEON S930 128, V.01, max UDMA/133
[    3.141994] ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.142457] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.142459] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.142461] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.142645] ata5.00: configured for UDMA/133
[    3.142873] scsi 4:0:0:0: Direct-Access     ATA      LITEON S930 128  V.01 PQ: 0 ANSI: 5
[    3.487632] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.488943] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.488946] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.488947] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.520329] ata6.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[    3.520331] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.521776] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    3.521778] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.521780] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.522974] ata6.00: configured for UDMA/133
[    3.523211] scsi 5:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[    3.578679] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.578681] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.578826] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.578988] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.579005] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.579007] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    3.579077] sd 4:0:0:0: [sda] Write Protect is off
[    3.579079] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.579086] sd 5:0:0:0: [sdb] Write Protect is off
[    3.579088] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.579101] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.579114] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.582098]  sda: sda1 sda2 sda3 sda4 sda5
[    3.582555] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.638807]  sdb: sdb1 sdb2 sdb3 sdb4
[    3.639314] sd 5:0:0:0: [sdb] Attached SCSI disk
[    4.233493] md: linear personality registered for level -1
[    4.234371] md: multipath personality registered for level -4
[    4.235385] md: raid0 personality registered for level 0
[    4.236512] md: raid1 personality registered for level 1
[    4.304371] raid6: sse2x1   gen() 10971 MB/s
[    4.372365] raid6: sse2x1   xor()  8305 MB/s
[    4.440375] raid6: sse2x2   gen() 13945 MB/s
[    4.508332] raid6: sse2x2   xor()  9746 MB/s
[    4.576328] raid6: sse2x4   gen() 16323 MB/s
[    4.644321] raid6: sse2x4   xor() 11059 MB/s
[    4.712316] raid6: avx2x1   gen() 21482 MB/s
[    4.780309] raid6: avx2x2   gen() 25092 MB/s
[    4.848342] raid6: avx2x4   gen() 29217 MB/s
[    4.848343] raid6: using algorithm avx2x4 gen() 29217 MB/s
[    4.848344] raid6: using avx2x2 recovery algorithm
[    4.848626] xor: automatically using best checksumming function   avx       
[    4.848749] async_tx: api initialized (async)
[    4.849682] md: raid6 personality registered for level 6
[    4.849684] md: raid5 personality registered for level 5
[    4.849684] md: raid4 personality registered for level 4
[    4.852641] md: raid10 personality registered for level 10
[    5.154278] Btrfs loaded, crc32c=crc32c-intel
[    5.642038] PM: Starting manual resume from disk
[    5.642041] PM: Hibernation image partition 8:5 present
[    5.642042] PM: Looking for hibernation image.
[    5.642118] PM: Image not found (code -22)
[    5.642119] PM: Hibernation image not present or could not be loaded.
[    5.778128] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.855871] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    5.867663] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.897090] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.897226] systemd[1]: Detected architecture x86-64.
[    5.897368] systemd[1]: Set hostname to <iYong-PC>.
[    5.944688] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.944732] systemd[1]: Reached target User and Group Name Lookups.
[    5.944761] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.944781] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.944917] systemd[1]: Created slice User and Session Slice.
[    5.944934] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.944955] systemd[1]: Listening on udev Control Socket.
[    5.956318] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    5.958037] lp: driver loaded but no devices found
[    5.959141] ppdev: user-space parallel port driver
[    5.961640] bbswitch: loading out-of-tree module taints kernel.
[    5.961766] bbswitch: version 0.8
[    5.961769] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    5.961773] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    5.961782] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    5.961867] bbswitch: detected an Optimus _DSM function
[    5.961875] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    5.961920] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    5.963799] fuse init (API version 7.26)
[    5.991589] systemd-journald[339]: Received request to flush runtime journal from PID 1
[    6.014882] ACPI: AC Adapter [AC] (on-line)
[    6.023767] ACPI: Battery Slot [BAT0] (battery present)
[    6.056551] input: PC Speaker as /devices/platform/pcspkr/input/input17
[    6.056630] EFI Variables Facility v0.08 2004-May-17
[    6.057237] EDAC MC: Ver: 3.0.0
[    6.057597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.058537] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    6.058580] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    6.059216] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    6.059547] EDAC ie31200: No ECC support
[    6.065355] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    6.065510] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.065557] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    6.066069] media: Linux media interface: v0.10
[    6.070645] Linux video capture interface: v2.00
[    6.075700] pstore: using zlib compression
[    6.075716] pstore: Registered efi as persistent store backend
[    6.076143] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.076144] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.076145] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.076146] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.076147] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.079599] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[    6.079601] snd_hda_codec_via hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.079603] snd_hda_codec_via hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[    6.079604] snd_hda_codec_via hdaudioC1D0:    mono: mono_out=0x0
[    6.079605] snd_hda_codec_via hdaudioC1D0:    inputs:
[    6.079606] snd_hda_codec_via hdaudioC1D0:      Internal Mic=0x30
[    6.079608] snd_hda_codec_via hdaudioC1D0:      Mic=0x2b
[    6.082114] Bluetooth: Core ver 2.22
[    6.082125] NET: Registered protocol family 31
[    6.082126] Bluetooth: HCI device and connection manager initialized
[    6.082129] Bluetooth: HCI socket layer initialized
[    6.082130] Bluetooth: L2CAP socket layer initialized
[    6.082139] Bluetooth: SCO socket layer initialized
[    6.083750] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b43b)
[    6.085551] usbcore: registered new interface driver btusb
[    6.088467] uvcvideo 3-8:1.0: Entity type for entity Extension 4 was not initialized!
[    6.088469] uvcvideo 3-8:1.0: Entity type for entity Processing 2 was not initialized!
[    6.088471] uvcvideo 3-8:1.0: Entity type for entity Camera 1 was not initialized!
[    6.088519] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    6.088925] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input21
[    6.089087] usbcore: registered new interface driver uvcvideo
[    6.089088] USB Video Class driver (1.1.1)
[    6.089132] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    6.089197] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    6.092539] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[    6.092613] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    6.092680] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    6.094312] random: crng init done
[    6.094322] Bluetooth: hci0: BCM: chip id 63
[    6.108323] iTCO_vendor_support: vendor-support=0
[    6.108488] wl: module license 'MIXED/Proprietary' taints kernel.
[    6.108488] Disabling lock debugging due to kernel taint
[    6.109243] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.109280] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    6.109393] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.110318] Bluetooth: hci0: BCM20702A
[    6.111238] intel_rapl: Found RAPL domain package
[    6.111239] intel_rapl: Found RAPL domain core
[    6.111240] intel_rapl: Found RAPL domain uncore
[    6.111241] intel_rapl: Found RAPL domain dram
[    6.111306] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    6.111407] wl 0000:03:00.0: enabling device (0000 -> 0002)
[    6.112684] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21fb.hcd
[    6.137020] wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)

[    6.192070] wl 0000:03:00.0 wlp3s0: renamed from wlan0
[    6.206325] Adding 3004412k swap on /dev/sda5.  Priority:-1 extents:1 across:3004412k SSFS
[    6.924316] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1766
[    6.940327] Bluetooth: hci0: DW1550 Bluetooth 4.0 LE
[    7.062198] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[    7.261533] bbswitch: disabling discrete graphics
[    7.261548] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    7.324543] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.324544] Bluetooth: BNEP filters: protocol multicast
[    7.324548] Bluetooth: BNEP socket layer initialized
[    7.478731] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[    7.479878] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[    7.571078] r8169 0000:04:00.2 enp4s0f2: link down
[    7.571079] r8169 0000:04:00.2 enp4s0f2: link down
[    7.571128] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[    7.574097] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.686989] r8169 0000:04:00.2 enp4s0f2: link up
[    9.686997] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f2: link becomes ready
[   20.803422] NET: Registered protocol family 15
[   20.812491] Initializing XFRM netlink socket
[ 1765.039975] perf: interrupt took too long (2594 > 2500), lowering kernel.perf_event_max_sample_rate to 77000
[ 2036.677665] perf: interrupt took too long (3250 > 3242), lowering kernel.perf_event_max_sample_rate to 61500
[ 2855.270123] perf: interrupt took too long (4107 > 4062), lowering kernel.perf_event_max_sample_rate to 48500
[ 3950.858496] Bluetooth: hci0: BCM: chip id 63
[ 3950.874504] Bluetooth: hci0: DW1550 Bluetooth 4.0 LE
[ 3950.875480] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1766
[ 3950.875606] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21fb.hcd
[ 3951.708475] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1766
[ 3951.724471] Bluetooth: hci0: DW1550 Bluetooth 4.0 LE
[ 4196.415160] rtsx_pci 0000:04:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[ 4196.421921] r8169 0000:04:00.2: invalid short VPD tag 00 at offset 1
