[    0.000000] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[    0.000000] Linux version 4.9.0-deepin13-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP PREEMPT Deepin 4.9.57-1 (2017-10-19) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin13-amd64 root=UUID=a8b73470-83b7-4d41-9d9e-5789555894e7 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a56affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a56b0000-0x00000000a5eaffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a5eb0000-0x00000000aa6befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa6bf000-0x00000000aa8befff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000aa8bf000-0x00000000aaebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xaaffe000  ACPI 2.0=0xaaffe014  SMBIOS=0xaaebef98 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20443/Lancer 4A2, BIOS 9ACN26WW 07/31/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 00AB000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 00AC000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 00B0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff897300082000] 82000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x2c524000, 0x2c524fff] PGTABLE
[    0.000000] BRK [0x2c525000, 0x2c525fff] PGTABLE
[    0.000000] BRK [0x2c526000, 0x2c526fff] PGTABLE
[    0.000000] BRK [0x2c527000, 0x2c527fff] PGTABLE
[    0.000000] BRK [0x2c528000, 0x2c528fff] PGTABLE
[    0.000000] BRK [0x2c529000, 0x2c529fff] PGTABLE
[    0.000000] BRK [0x2c52a000, 0x2c52afff] PGTABLE
[    0.000000] BRK [0x2c52b000, 0x2c52bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33528000-0x35a8bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000AAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000AAFFE210 0000C4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AAFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000AAFE4000 00F4BB (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000AAFBA000 000040
[    0.000000] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x00000000AAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000AAFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x00000000AAFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000AAFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000AAFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000AAFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000AAFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000AAFE3000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFE0000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000AAFDE000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x00000000AAFDD000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000AAFDB000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x00000000AAFDA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFD2000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFD1000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFCD000 0034F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFC9000 002290 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x00000000AAFCC000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14f5f9000-0x14f5fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000014f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.000000]   node   0: [mem 0x0000000000070000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a56affff]
[    0.000000]   node   0: [mem 0x00000000a5eb0000-0x00000000aa6befff]
[    0.000000]   node   0: [mem 0x00000000aafff000-0x00000000aaffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000014f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014f5fffff]
[    0.000000] On node 0 totalpages: 1020998
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10811 pages used for memmap
[    0.000000]   DMA32 zone: 691904 pages, LIFO batch:31
[    0.000000]   Normal zone: 5080 pages used for memmap
[    0.000000]   Normal zone: 325120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa56b0000-0xa5eaffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa6bf000-0xaa8befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa8bf000-0xaaebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff89744f200000 s103896 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s103896 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1005019
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin13-amd64 root=UUID=a8b73470-83b7-4d41-9d9e-5789555894e7 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3824476K/4083992K available (6268K kernel code, 1142K rwdata, 2868K rodata, 1348K init, 688K bss, 259516K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.990 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.98 BogoMIPS (lpj=10375960)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000052] ACPI: Core revision 20160831
[    0.017477] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.035932] Security Framework initialized
[    0.035934] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.035939] AppArmor: AppArmor disabled by boot time parameter
[    0.036215] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.037101] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.037522] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037527] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037833] CPU: Physical Processor ID: 0
[    0.037834] CPU: Processor Core ID: 0
[    0.037839] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.037839] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037843] mce: CPU supports 7 MCE banks
[    0.037860] CPU0: Thermal monitoring enabled (TM1)
[    0.037874] process: using mwait in idle threads
[    0.037877] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.037878] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.038252] Freeing SMP alternatives memory: 24K
[    0.043124] ftrace: allocating 25177 entries in 99 pages
[    0.054376] smpboot: Max logical packages: 4
[    0.054947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094636] TSC deadline timer enabled
[    0.094639] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.094643] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.094686] ... version:                3
[    0.094687] ... bit width:              48
[    0.094688] ... generic registers:      4
[    0.094688] ... value mask:             0000ffffffffffff
[    0.094689] ... max period:             00007fffffffffff
[    0.094690] ... fixed-purpose events:   3
[    0.094690] ... event mask:             000000070000000f
[    0.134897] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.174832] x86: Booting SMP configuration:
[    0.174833] .... node  #0, CPUs:      #1 #2 #3
[    0.245682] x86: Booted up 1 node, 4 CPUs
[    0.245685] smpboot: Total of 4 processors activated (20751.92 BogoMIPS)
[    0.250697] devtmpfs: initialized
[    0.250771] x86/mm: Memory block size: 128MB
[    0.253067] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[    0.253164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.253181] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.253244] pinctrl core: initialized pinctrl subsystem
[    0.253375] NET: Registered protocol family 16
[    0.266462] cpuidle: using governor ladder
[    0.278465] cpuidle: using governor menu
[    0.278488] Simple Boot Flag at 0x44 set to 0x1
[    0.278498] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.278499] ACPI: bus type PCI registered
[    0.278501] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.278580] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.278582] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.278586] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.278874] PCI: Using configuration type 1 for base access
[    0.278915] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.294610] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.294611] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.294910] ACPI: Added _OSI(Module Device)
[    0.294911] ACPI: Added _OSI(Processor Device)
[    0.294912] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.294913] ACPI: Added _OSI(Processor Aggregator Device)
[    0.298541] ACPI: Executed 2 blocks of module-level executable AML code
[    0.306059] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.307394] ACPI: Dynamic OEM Table Load:
[    0.307403] ACPI: SSDT 0xFFFF89744988BC00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.307859] ACPI: Dynamic OEM Table Load:
[    0.307867] ACPI: SSDT 0xFFFF897449863000 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
[    0.308383] ACPI: Dynamic OEM Table Load:
[    0.308389] ACPI: SSDT 0xFFFF897449878E00 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
[    0.309678] ACPI : EC: EC started
[    0.309679] ACPI : EC: interrupt blocked
[    0.310706] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.310708] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.310709] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.310710] ACPI: Interpreter enabled
[    0.310753] ACPI: (supports S0 S3 S4 S5)
[    0.310754] ACPI: Using IOAPIC for interrupt routing
[    0.310787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.370816] ACPI: Power Resource [AMD3] (on)
[    0.370848] ACPI: Power Resource [AMD2] (on)
[    0.371120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.371125] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.371604] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.371605] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.372290] PCI host bridge to bus 0000:00
[    0.372293] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.372294] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.372296] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.372297] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.372298] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.372299] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.372301] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.372302] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.372303] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.372304] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.372305] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.372307] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.372309] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.372317] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.372556] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.372568] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.372575] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.372580] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.372809] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.372819] pci 0000:00:03.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
[    0.373069] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.373086] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
[    0.373146] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.373317] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.373363] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.373382] pci 0000:00:16.0: reg 0x10: [mem 0xd0718000-0xd071801f 64bit]
[    0.373452] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.373668] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.373683] pci 0000:00:1b.0: reg 0x10: [mem 0xd0714000-0xd0717fff 64bit]
[    0.373751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.373926] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.373968] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[    0.374033] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.374255] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.374300] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.374366] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.374592] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.374635] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[    0.374701] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.374892] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.374939] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.374957] pci 0000:00:1d.0: reg 0x10: [mem 0xd071c000-0xd071c3ff]
[    0.375044] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.375232] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.375277] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.375592] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.375605] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.375612] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.375619] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.375625] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.375632] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.375639] pci 0000:00:1f.2: reg 0x24: [mem 0xd071b000-0xd071b7ff]
[    0.375674] pci 0000:00:1f.2: PME# supported from D3hot
[    0.375879] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.375893] pci 0000:00:1f.3: reg 0x10: [mem 0xd0719000-0xd07190ff 64bit]
[    0.375912] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.376196] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.376215] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.376244] pci 0000:01:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
[    0.376262] pci 0000:01:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit]
[    0.376358] pci 0000:01:00.0: supports D1 D2
[    0.376360] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.376409] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.386555] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.386558] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.386561] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.386713] pci 0000:02:00.0: [8086:08b4] type 00 class 0x028000
[    0.386840] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[    0.387488] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.387673] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.398621] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.398625] pci 0000:00:1c.3:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.398701] pci 0000:03:00.0: [1002:666f] type 00 class 0x038000
[    0.398718] pci 0000:03:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.398730] pci 0000:03:00.0: reg 0x18: [mem 0xd0400000-0xd043ffff 64bit]
[    0.398737] pci 0000:03:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.398751] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.398808] pci 0000:03:00.0: supports D1 D2
[    0.398809] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.398845] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.410562] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.410565] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.410568] pci 0000:00:1c.4:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.410573] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.412194] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412311] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412534] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412590] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.412948] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.413011] ACPI : EC: interrupt unblocked
[    0.413019] ACPI : EC: event unblocked
[    0.413026] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.413027] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.413253] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.413254] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.413257] vgaarb: loaded
[    0.413258] vgaarb: bridge control possible 0000:00:02.0
[    0.413290] Registered efivars operations
[    0.449010] PCI: Using ACPI for IRQ routing
[    0.454782] PCI: pci_cache_line_size set to 64 bytes
[    0.454851] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    0.454853] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.454854] e820: reserve RAM buffer [mem 0xa56b0000-0xa7ffffff]
[    0.454855] e820: reserve RAM buffer [mem 0xaa6bf000-0xabffffff]
[    0.454856] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.454858] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.455051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.455057] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.457083] clocksource: Switched to clocksource hpet
[    0.464683] VFS: Disk quotas dquot_6.6.0
[    0.464712] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.464811] pnp: PnP ACPI init
[    0.465443] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.465445] system 00:00: [io  0xffff] has been reserved
[    0.465447] system 00:00: [io  0xffff] has been reserved
[    0.465448] system 00:00: [io  0xffff] has been reserved
[    0.465451] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.465453] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.465456] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.465507] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.465564] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.465566] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.465625] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.465655] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.465822] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.465824] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.465825] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.465827] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.465829] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.465830] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.465832] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.465834] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.465835] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.465837] system 00:05: [mem 0xafa20000-0xafa20fff] has been reserved
[    0.465838] system 00:05: [mem 0xafa10000-0xafa1ffff] has been reserved
[    0.465841] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.466168] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.466848] pnp: PnP ACPI: found 7 devices
[    0.473174] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.473180] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.473203] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.473206] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.473210] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.473217] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.473221] pci 0000:00:1c.3:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.473231] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0440000-0xd045ffff pref]
[    0.473232] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.473234] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.473238] pci 0000:00:1c.4:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.473241] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.473247] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.473248] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.473250] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.473251] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.473252] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.473253] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.473255] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.473256] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.473257] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.473258] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.473260] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.473261] pci_bus 0000:00: resource 15 [mem 0xafa00000-0xfeafffff window]
[    0.473262] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.473264] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.473265] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.473266] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.473268] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.473269] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.473450] NET: Registered protocol family 2
[    0.473658] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.473735] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.473836] TCP: Hash tables configured (established 32768 bind 32768)
[    0.473858] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.473875] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.473938] NET: Registered protocol family 1
[    0.473952] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.493263] PCI: CLS 64 bytes, default 64
[    0.493309] Unpacking initramfs...
[    1.238775] Freeing initrd memory: 38288K
[    1.238778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.238781] software IO TLB [mem 0x9eec0000-0xa2ec0000] (64MB) mapped at [ffff89739eec0000-ffff8973a2ebffff]
[    1.239238] audit: initializing netlink subsys (disabled)
[    1.239260] audit: type=2000 audit(1511326492.216:1): initialized
[    1.239724] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.239763] zbud: loaded
[    1.240454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.240483] io scheduler noop registered
[    1.240483] io scheduler deadline registered
[    1.240496] io scheduler cfq registered (default)
[    1.241179] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.241181] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.241184] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    1.241201] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.241202] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.241205] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    1.241221] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.241222] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.241225] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[    1.241234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.241239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.241253] efifb: probing for efifb
[    1.241272] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    1.241273] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.241274] efifb: scrolling: redraw
[    1.241275] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.246181] Console: switching to colour frame buffer device 240x67
[    1.250893] fb0: EFI VGA frame buffer device
[    1.250900] intel_idle: disabled
[    1.251310] Monitor-Mwait will be used to enter C-1 state
[    1.251315] Monitor-Mwait will be used to enter C-2 state
[    1.251318] Monitor-Mwait will be used to enter C-3 state
[    1.256222] GHES: HEST is not enabled!
[    1.256284] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.256759] Linux agpgart interface v0.103
[    1.256849] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.256850] AMD IOMMUv2 functionality not available on this system
[    1.257250] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.271849] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.271888] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.272005] mousedev: PS/2 mouse device common for all mice
[    1.272462] rtc_cmos 00:01: RTC can wake from S4
[    1.272597] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.272622] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.272689] ledtrig-cpu: registered to indicate activity on CPUs
[    1.273068] NET: Registered protocol family 10
[    1.273344] mip6: Mobile IPv6
[    1.273346] NET: Registered protocol family 17
[    1.273349] mpls_gso: MPLS GSO support
[    1.273556] microcode: sig=0x40651, pf=0x40, revision=0x20
[    1.273619] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.273744] registered taskstats version 1
[    1.273759] zswap: loaded using pool lzo/zbud
[    1.273857] ima: No TPM chip found, activating TPM-bypass!
[    1.274232] rtc_cmos 00:01: setting system clock to 2017-11-22 04:54:52 UTC (1511326492)
[    1.274301] PM: Hibernation image not present or could not be loaded.
[    1.275428] Freeing unused kernel memory: 1348K
[    1.275429] Write protecting the kernel read-only data: 12288k
[    1.275901] Freeing unused kernel memory: 1908K
[    1.278921] Freeing unused kernel memory: 1228K
[    1.280397] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.285547] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.326556] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.326598] ACPI: Lid Switch [LID0]
[    1.326695] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.326699] ACPI: Power Button [PWRB]
[    1.326787] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.326792] ACPI: Power Button [PWRF]
[    1.328975] hidraw: raw HID events driver (C) Jiri Kosina
[    1.332747] sdhci: Secure Digital Host Controller Interface driver
[    1.332749] sdhci: Copyright(c) Pierre Ossman
[    1.341643] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.341656] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.342531] ACPI: bus type USB registered
[    1.342569] usbcore: registered new interface driver usbfs
[    1.342588] usbcore: registered new interface driver hub
[    1.342626] usbcore: registered new device driver usb
[    1.344100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.348014] [drm] Initialized
[    1.350367] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.350398] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.350891] SCSI subsystem initialized
[    1.353582] ehci-pci: EHCI PCI platform driver
[    1.354481] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffff9c78c0661000, 28:d2:44:a3:38:f4, XID 10900800 IRQ 43
[    1.354485] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.355251] AVX2 version of gcm_enc/dec engaged.
[    1.355252] AES CTR mode by8 optimization enabled
[    1.357905] libata version 3.00 loaded.
[    1.366109] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.367133] [drm] radeon kernel modesetting enabled.
[    1.367151] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.370639] ATPX version 1, functions 0x00000033
[    1.370830] ATPX Hybrid Graphics
[    1.372704] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.372712] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.372727] ehci-pci 0000:00:1d.0: debug port 2
[    1.373757] CRAT table not found
[    1.373759] Finished initializing topology ret=0
[    1.373774] kfd kfd: Initialized module
[    1.374044] checking generic (c0000000 7f0000) vs hw (b0000000 10000000)
[    1.374098] radeon 0000:03:00.0: enabling device (0000 -> 0003)
[    1.374343] [drm] initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
[    1.374356] [drm] register mmio base: 0xD0400000
[    1.374357] [drm] register mmio size: 262144
[    1.376643] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.376658] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd071c000
[    1.382055] ATOM BIOS: AMD
[    1.382063] [drm] GPU not posted. posting now...
[    1.385974] radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.385976] radeon 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    1.385981] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.385982] [drm] RAM width 64bits DDR
[    1.386074] [TTM] Zone  kernel: Available graphics memory: 1969834 kiB
[    1.386075] [TTM] Initializing pool allocator
[    1.386080] [TTM] Initializing DMA pool allocator
[    1.386105] [drm] radeon: 2048M of VRAM memory ready
[    1.386106] [drm] radeon: 2048M of GTT memory ready.
[    1.386121] [drm] Loading hainan Microcode
[    1.386149] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin
[    1.386163] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_me.bin
[    1.386176] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin
[    1.386190] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
[    1.386208] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
[    1.386233] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_smc.bin
[    1.386236] [drm] Internal thermal controller with fan control
[    1.386303] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[    1.393139] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.393195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.393196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.393198] usb usb1: Product: EHCI Host Controller
[    1.393199] usb usb1: Manufacturer: Linux 4.9.0-deepin13-amd64 ehci_hcd
[    1.393200] usb usb1: SerialNumber: 0000:00:1d.0
[    1.393349] hub 1-0:1.0: USB hub found
[    1.393355] hub 1-0:1.0: 2 ports detected
[    1.393519] ahci 0000:00:1f.2: version 3.0
[    1.393763] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.395321] [drm] radeon: dpm initialized
[    1.395326] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.396888] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[    1.396891] [drm] PCIE gen 2 link speeds already enabled
[    1.399867] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    1.399984] radeon 0000:03:00.0: WB enabled
[    1.399987] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff89744130cc00
[    1.399988] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff89744130cc04
[    1.399989] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff89744130cc08
[    1.399991] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff89744130cc0c
[    1.399992] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff89744130cc10
[    1.399993] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.399994] [drm] Driver supports precise vblank timestamp query.
[    1.399995] radeon 0000:03:00.0: radeon: MSI limited to 32-bit
[    1.400038] radeon 0000:03:00.0: radeon: using MSI.
[    1.400062] [drm] radeon: irq initialized.
[    1.403868] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.403871] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst 
[    1.404662] scsi host0: ahci
[    1.404798] scsi host1: ahci
[    1.404910] scsi host2: ahci
[    1.405024] scsi host3: ahci
[    1.405104] ata1: SATA max UDMA/133 abar m2048@0xd071b000 port 0xd071b100 irq 44
[    1.405106] ata2: SATA max UDMA/133 abar m2048@0xd071b000 port 0xd071b180 irq 44
[    1.405108] ata3: SATA max UDMA/133 abar m2048@0xd071b000 port 0xd071b200 irq 44
[    1.405110] ata4: SATA max UDMA/133 abar m2048@0xd071b000 port 0xd071b280 irq 44
[    1.405307] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.405314] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.406406] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.406411] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.406567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.406570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.406573] usb usb2: Product: xHCI Host Controller
[    1.406574] usb usb2: Manufacturer: Linux 4.9.0-deepin13-amd64 xhci-hcd
[    1.406576] usb usb2: SerialNumber: 0000:00:14.0
[    1.406772] hub 2-0:1.0: USB hub found
[    1.406791] hub 2-0:1.0: 9 ports detected
[    1.408324] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.408329] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.408366] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.408368] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.408369] usb usb3: Product: xHCI Host Controller
[    1.408370] usb usb3: Manufacturer: Linux 4.9.0-deepin13-amd64 xhci-hcd
[    1.408371] usb usb3: SerialNumber: 0000:00:14.0
[    1.408527] hub 3-0:1.0: USB hub found
[    1.408540] hub 3-0:1.0: 4 ports detected
[    1.408740] usb: port power management may be unreliable
[    1.409255] [drm] Memory usable by graphics device = 2048M
[    1.409257] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    1.409259] fb: switching to inteldrmfb from EFI VGA
[    1.409286] Console: switching to colour dummy device 80x25
[    1.409377] [drm] Replacing VGA console driver
[    1.415160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.415162] [drm] Driver supports precise vblank timestamp query.
[    1.417112] vga_switcheroo: enabled
[    1.417514] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.600316] [drm] ring test on 0 succeeded in 1 usecs
[    1.600322] [drm] ring test on 1 succeeded in 1 usecs
[    1.600326] [drm] ring test on 2 succeeded in 1 usecs
[    1.600335] [drm] ring test on 3 succeeded in 4 usecs
[    1.600342] [drm] ring test on 4 succeeded in 4 usecs
[    1.600610] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.600638] [drm] ib test on ring 1 succeeded in 0 usecs
[    1.600662] [drm] ib test on ring 2 succeeded in 0 usecs
[    1.600684] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.600705] [drm] ib test on ring 4 succeeded in 0 usecs
[    1.600984] [drm] Radeon Display Connectors
[    1.602149] [drm] Initialized radeon 2.49.0 20080528 for 0000:03:00.0 on minor 0
[    1.604209] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.606799] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    1.606805] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.606811] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff89744a8fbc58), AE_NOT_FOUND (20160831/psparse-543)
[    1.607047] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:31/LNXVIDEO:00/input/input6
[    1.610222] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.610419] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.610455] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 1
[    1.612298] fbcon: inteldrmfb (fb0) is primary device
[    1.720364] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.721128] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.727276] ata1.00: ATA-9: ST500LM000-SSHD-8GB, LVD3, max UDMA/133
[    1.727278] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.733153] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    1.740232] ata1.00: configured for UDMA/133
[    1.740680] scsi 0:0:0:0: Direct-Access     ATA      ST500LM000-SSHD- LVD3 PQ: 0 ANSI: 5
[    1.869951] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    1.869952] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.870266] hub 1-1:1.0: USB hub found
[    1.870737] hub 1-1:1.0: 8 ports detected
[    1.875324] usb 2-1: New USB device found, idVendor=2717, idProduct=5001
[    1.875326] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.875327] usb 2-1: Product: MI wireless mouse
[    1.875328] usb 2-1: Manufacturer: GTech
[    1.879549] usbcore: registered new interface driver usbhid
[    1.879550] usbhid: USB HID core driver
[    1.880347] input: GTech MI wireless mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:2717:5001.0001/input/input8
[    1.937514] hid-generic 0003:2717:5001.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [GTech MI wireless mouse] on usb-0000:00:14.0-1/input0
[    1.993171] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[    2.084736] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.085108] ata2.00: supports DRM functions and may not be fully accessible
[    2.085964] ata2.00: disabling queued TRIM support
[    2.085966] ata2.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT02B6Q, max UDMA/133
[    2.085968] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.086645] ata2.00: supports DRM functions and may not be fully accessible
[    2.087377] ata2.00: disabling queued TRIM support
[    2.087631] ata2.00: configured for UDMA/133
[    2.088050] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.133504] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[    2.133506] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.133507] usb 2-4: Product: USB2.0-CRW
[    2.133508] usb 2-4: Manufacturer: Generic
[    2.133509] usb 2-4: SerialNumber: 20100201396000000
[    2.136778] usbcore: registered new interface driver rtsx_usb
[    2.253173] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[    2.257170] tsc: Refined TSC clocksource calibration: 2593.995 MHz
[    2.257178] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns
[    2.432910] usb 2-6: New USB device found, idVendor=0bda, idProduct=579a
[    2.432911] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.432913] usb 2-6: Product: Lenovo EasyCamera
[    2.432914] usb 2-6: Manufacturer: J58E7U9YS
[    2.432915] usb 2-6: SerialNumber: 200901010001
[    2.440668] ata3: SATA link down (SStatus 0 SControl 300)
[    2.553174] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    2.694620] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.694622] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.756802] ata4: SATA link down (SStatus 0 SControl 300)
[    2.978973] Console: switching to colour frame buffer device 240x67
[    3.017024] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.032350] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.032354] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.032392] sd 0:0:0:0: [sda] Write Protect is off
[    3.032394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.032403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.032472] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.032558] sd 1:0:0:0: [sdb] Write Protect is off
[    3.032562] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.032586] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.034147]  sdb: sdb1 sdb3
[    3.034585] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.038525]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda8 sda12
[    3.039045] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.048602] random: fast init done
[    3.281254] clocksource: Switched to clocksource tsc
[    3.473357] ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x6
[    3.473397] ata1.00: irq_stat 0x40000008
[    3.473418] ata1.00: failed command: READ FPDMA QUEUED
[    3.473443] ata1.00: cmd 60/00:a0:00:03:00/01:00:00:00:00/40 tag 20 ncq dma 131072 in
                        res 41/84:00:02:03:00/00:01:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[    3.473506] ata1.00: status: { DRDY ERR }
[    3.473525] ata1.00: error: { ICRC ABRT }
[    3.473546] ata1: hard resetting link
[    3.788400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.972803] ata1.00: configured for UDMA/133
[    3.972826] ata1: EH complete
[    4.206448] md: linear personality registered for level -1
[    4.207934] md: multipath personality registered for level -4
[    4.209235] md: raid0 personality registered for level 0
[    4.210587] md: raid1 personality registered for level 1
[    4.277124] raid6: sse2x1   gen()  6029 MB/s
[    4.345113] raid6: sse2x1   xor()  4573 MB/s
[    4.413097] raid6: sse2x2   gen()  7630 MB/s
[    4.481094] raid6: sse2x2   xor()  5327 MB/s
[    4.549094] raid6: sse2x4   gen()  8801 MB/s
[    4.617092] raid6: sse2x4   xor()  6230 MB/s
[    4.685092] raid6: avx2x1   gen() 11756 MB/s
[    4.753092] raid6: avx2x2   gen() 13579 MB/s
[    4.821093] raid6: avx2x4   gen() 15648 MB/s
[    4.821094] raid6: using algorithm avx2x4 gen() 15648 MB/s
[    4.821095] raid6: using avx2x2 recovery algorithm
[    4.821357] xor: automatically using best checksumming function   avx       
[    4.821565] async_tx: api initialized (async)
[    4.827198] md: raid6 personality registered for level 6
[    4.827199] md: raid5 personality registered for level 5
[    4.827200] md: raid4 personality registered for level 4
[    4.830880] md: raid10 personality registered for level 10
[    4.890562] Btrfs loaded, crc32c=crc32c-intel
[    4.961368] PM: Starting manual resume from disk
[    4.961372] PM: Hibernation image partition 8:8 present
[    4.961373] PM: Looking for hibernation image.
[    4.961686] PM: Image not found (code -22)
[    4.961687] PM: Hibernation image not present or could not be loaded.
[    5.041484] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    5.146566] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.221304] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.221442] systemd[1]: Detected architecture x86-64.
[    5.221585] systemd[1]: Set hostname to <shangke-PC>.
[    5.248802] systemd-sysv-generator[277]: stat() failed on /etc/init.d/xx_net, ignoring: No such file or directory
[    5.306088] systemd[1]: Created slice User and Session Slice.
[    5.306165] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.306188] systemd[1]: Reached target Remote File Systems.
[    5.306223] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.306244] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.306293] systemd[1]: Listening on Journal Socket.
[    5.306389] systemd[1]: Listening on Journal Audit Socket.
[    5.332929] lp: driver loaded but no devices found
[    5.338181] ppdev: user-space parallel port driver
[    5.340262] bbswitch: loading out-of-tree module taints kernel.
[    5.340523] bbswitch: version 0.8
[    5.340528] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    5.340534] bbswitch: No discrete VGA device found
[    5.375004] fuse init (API version 7.26)
[    5.403129] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[    5.414566] systemd-journald[285]: Received request to flush runtime journal from PID 1
[    5.418988] systemd-journald[285]: File /var/log/journal/1112be392eb54efc98ca37d8f52229ce/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.518507] ACPI: AC Adapter [ADP0] (on-line)
[    5.557350] wmi: Mapper loaded
[    5.560138] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[    5.570897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.596943] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.616951] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.616971] Bluetooth: Core ver 2.22
[    5.616982] NET: Registered protocol family 31
[    5.616983] Bluetooth: HCI device and connection manager initialized
[    5.616987] Bluetooth: HCI socket layer initialized
[    5.616989] Bluetooth: L2CAP socket layer initialized
[    5.616999] Bluetooth: SCO socket layer initialized
[    5.617004] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.618296] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    5.618598] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    5.618600] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.618602] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    5.618603] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    5.618605] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    5.618607] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    5.618608] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    5.619245] media: Linux media interface: v0.10
[    5.620744] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    5.623796] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    5.623875] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    5.623937] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    5.624146] Linux video capture interface: v2.00
[    5.624913] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    5.625114] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    5.625237] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    5.626106] Intel(R) Wireless WiFi driver for Linux
[    5.626107] Copyright(c) 2003- 2015 Intel Corporation
[    5.627860] usbcore: registered new interface driver btusb
[    5.631593] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3160-17.ucode
[    5.631932] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[    5.633973] input: PC Speaker as /devices/platform/pcspkr/input/input16
[    5.634191] EFI Variables Facility v0.08 2004-May-17
[    5.645813] Bluetooth: hci0: read Intel version: 370710010002030d00
[    5.646445] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
[    5.646448] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
[    5.650494] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.650496] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.650497] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.650497] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.650498] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.650855] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    5.652924] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    5.653213] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    5.654287] ACPI: Battery Slot [BAT0] (battery present)
[    5.655531] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a)
[    5.656449] wl: module license 'MIXED/Proprietary' taints kernel.
[    5.656450] Disabling lock debugging due to kernel taint
[    5.659846] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[    5.659850] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[    5.659852] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.660853] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input17
[    5.661157] usbcore: registered new interface driver uvcvideo
[    5.661159] USB Video Class driver (1.1.1)
[    5.687866] intel_rapl: Found RAPL domain package
[    5.687868] intel_rapl: Found RAPL domain core
[    5.687870] intel_rapl: Found RAPL domain uncore
[    5.687871] intel_rapl: Found RAPL domain dram
[    5.687875] intel_rapl: RAPL package 0 domain package locked by BIOS
[    5.704169] pstore: using zlib compression
[    5.704182] pstore: Registered efi as persistent store backend
[    5.712224] iTCO_vendor_support: vendor-support=0
[    5.712587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.712623] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    5.712941] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.768179] bbswitch: version 0.8
[    5.768184] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    5.768189] bbswitch: No discrete VGA device found
[    5.782809] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    5.795387] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.797844] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.808460] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.834739] random: crng init done
[    5.835135] Adding 5242876k swap on /dev/sda8.  Priority:-1 extents:1 across:5242876k FS
[    6.371396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.371398] Bluetooth: BNEP filters: protocol multicast
[    6.371401] Bluetooth: BNEP socket layer initialized
[    6.711262] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    6.713734] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[    6.735765] r8169 0000:01:00.0 enp1s0: link down
[    6.735826] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    6.739465] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.741146] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    6.741406] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    6.859175] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    6.859425] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    6.872735] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.994253] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   13.566583] wlp2s0: authenticate with f0:b4:29:5e:21:11
[   13.569635] wlp2s0: send auth to f0:b4:29:5e:21:11 (try 1/3)
[   13.606406] wlp2s0: authenticated
[   13.609194] wlp2s0: associate with f0:b4:29:5e:21:11 (try 1/3)
[   13.649228] wlp2s0: RX AssocResp from f0:b4:29:5e:21:11 (capab=0xc11 status=0 aid=1)
[   13.650693] wlp2s0: associated
[   13.650786] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   14.092812] NET: Registered protocol family 15
[   14.104714] Initializing XFRM netlink socket
[   19.837171] Bluetooth: RFCOMM TTY layer initialized
[   19.837181] Bluetooth: RFCOMM socket layer initialized
[   19.837194] Bluetooth: RFCOMM ver 1.11
[   20.224073] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  192.315248] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[  192.315252] ata1.00: irq_stat 0x40000008
[  192.315255] ata1.00: failed command: READ FPDMA QUEUED
[  192.315260] ata1.00: cmd 60/00:d8:00:44:1f/02:00:00:00:00/40 tag 27 ncq dma 262144 in
                        res 41/84:00:02:44:1f/00:02:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  192.315262] ata1.00: status: { DRDY ERR }
[  192.315263] ata1.00: error: { ICRC ABRT }
[  192.315267] ata1: hard resetting link
[  192.629796] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  192.643406] ata1.00: configured for UDMA/133
[  192.643421] ata1: EH complete
[  192.971165] ata1.00: exception Emask 0x0 SAct 0x38000 SErr 0x0 action 0x6
[  192.971169] ata1.00: irq_stat 0x40000008
[  192.971172] ata1.00: failed command: READ FPDMA QUEUED
[  192.971177] ata1.00: cmd 60/f8:78:00:46:1f/00:00:00:00:00/40 tag 15 ncq dma 126976 in
                        res 41/84:f8:04:46:1f/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  192.971179] ata1.00: status: { DRDY ERR }
[  192.971180] ata1.00: error: { ICRC ABRT }
[  192.971184] ata1: hard resetting link
[  193.285807] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  193.394787] ata1.00: configured for UDMA/133
[  193.394816] ata1: EH complete
[  193.407107] ata1: limiting SATA link speed to 3.0 Gbps
[  193.407111] ata1.00: exception Emask 0x0 SAct 0x600000 SErr 0x0 action 0x6
[  193.407115] ata1.00: irq_stat 0x40000008
[  193.407119] ata1.00: failed command: READ FPDMA QUEUED
[  193.407124] ata1.00: cmd 60/80:a8:00:47:1f/00:00:00:00:00/40 tag 21 ncq dma 65536 in
                        res 41/84:80:10:47:1f/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  193.407126] ata1.00: status: { DRDY ERR }
[  193.407127] ata1.00: error: { ICRC ABRT }
[  193.407131] ata1: hard resetting link
[  193.721985] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  193.838564] ata1.00: configured for UDMA/133
[  193.838586] ata1: EH complete
[  193.895098] ata1.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x6
[  193.895102] ata1.00: irq_stat 0x40000008
[  193.895105] ata1.00: failed command: READ FPDMA QUEUED
[  193.895110] ata1.00: cmd 60/08:60:f0:a7:46/00:00:00:00:00/40 tag 12 ncq dma 4096 in
                        res 41/84:08:f2:a7:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  193.895112] ata1.00: status: { DRDY ERR }
[  193.895114] ata1.00: error: { ICRC ABRT }
[  193.895117] ata1: hard resetting link
[  194.210002] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  194.465103] ata1.00: configured for UDMA/133
[  194.465121] ata1: EH complete
[  194.495054] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[  194.495058] ata1.00: irq_stat 0x40000008
[  194.495061] ata1.00: failed command: READ FPDMA QUEUED
[  194.495065] ata1.00: cmd 60/08:38:f8:a7:46/00:00:00:00:00/40 tag 7 ncq dma 4096 in
                        res 41/84:08:f8:a7:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  194.495067] ata1.00: status: { DRDY ERR }
[  194.495069] ata1.00: error: { ICRC ABRT }
[  194.495072] ata1: hard resetting link
[  194.809753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  194.970195] ata1.00: configured for UDMA/133
[  194.970216] ata1: EH complete
[  195.003125] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[  195.003130] ata1.00: irq_stat 0x40000008
[  195.003134] ata1.00: failed command: READ FPDMA QUEUED
[  195.003139] ata1.00: cmd 60/08:c8:f8:a6:46/00:00:00:00:00/40 tag 25 ncq dma 4096 in
                        res 41/84:08:fa:a6:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  195.003141] ata1.00: status: { DRDY ERR }
[  195.003142] ata1.00: error: { ICRC ABRT }
[  195.003147] ata1: hard resetting link
[  195.317545] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  195.469527] ata1.00: configured for UDMA/133
[  195.469549] ata1: EH complete
[  195.510966] ata1: limiting SATA link speed to 1.5 Gbps
[  195.510970] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[  195.510973] ata1.00: irq_stat 0x40000008
[  195.510976] ata1.00: failed command: READ FPDMA QUEUED
[  195.510981] ata1.00: cmd 60/00:b8:00:a4:46/02:00:00:00:00/40 tag 23 ncq dma 262144 in
                        res 41/84:00:c0:a5:46/00:02:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  195.510983] ata1.00: status: { DRDY ERR }
[  195.510985] ata1.00: error: { ICRC ABRT }
[  195.510988] ata1: hard resetting link
[  195.825435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  195.979777] ata1.00: configured for UDMA/133
[  195.979791] ata1: EH complete
[  196.011060] ata1.00: exception Emask 0x0 SAct 0x3800 SErr 0x0 action 0x6
[  196.011064] ata1.00: irq_stat 0x40000008
[  196.011068] ata1.00: failed command: READ FPDMA QUEUED
[  196.011072] ata1.00: cmd 60/f8:58:00:a6:46/00:00:00:00:00/40 tag 11 ncq dma 126976 in
                        res 41/84:f8:40:a6:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  196.011075] ata1.00: status: { DRDY ERR }
[  196.011076] ata1.00: error: { ICRC ABRT }
[  196.011080] ata1: hard resetting link
[  196.325364] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  196.479127] ata1.00: configured for UDMA/133
[  196.479153] ata1: EH complete
[  196.491026] ata1.00: exception Emask 0x0 SAct 0x70000 SErr 0x0 action 0x6
[  196.491031] ata1.00: irq_stat 0x40000008
[  196.491035] ata1.00: failed command: READ FPDMA QUEUED
[  196.491040] ata1.00: cmd 60/68:80:88:a7:46/00:00:00:00:00/40 tag 16 ncq dma 53248 in
                        res 41/84:68:c0:a7:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  196.491042] ata1.00: status: { DRDY ERR }
[  196.491044] ata1.00: error: { ICRC ABRT }
[  196.491048] ata1: hard resetting link
[  196.805129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  196.967216] ata1.00: configured for UDMA/133
[  196.967241] ata1: EH complete
[  196.978885] ata1.00: exception Emask 0x0 SAct 0x70 SErr 0x0 action 0x6
[  196.978889] ata1.00: irq_stat 0x40000008
[  196.978892] ata1.00: failed command: READ FPDMA QUEUED
[  196.978897] ata1.00: cmd 60/80:28:00:a7:46/00:00:00:00:00/40 tag 5 ncq dma 65536 in
                        res 41/84:80:40:a7:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  196.978899] ata1.00: status: { DRDY ERR }
[  196.978900] ata1.00: error: { ICRC ABRT }
[  196.978904] ata1: hard resetting link
[  197.293422] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  197.455378] ata1.00: configured for UDMA/133
[  197.455401] ata1: EH complete
[  197.542848] ata1.00: limiting speed to UDMA/100:PIO4
[  197.542852] ata1.00: exception Emask 0x0 SAct 0x300 SErr 0x0 action 0x6
[  197.542855] ata1.00: irq_stat 0x40000008
[  197.542858] ata1.00: failed command: READ FPDMA QUEUED
[  197.542862] ata1.00: cmd 60/80:40:00:17:da/00:00:37:00:00/40 tag 8 ncq dma 65536 in
                        res 41/84:80:48:17:da/00:00:37:00:00/00 Emask 0x410 (ATA bus error) <F>
[  197.542865] ata1.00: status: { DRDY ERR }
[  197.542866] ata1.00: error: { ICRC ABRT }
[  197.542870] ata1: hard resetting link
[  197.857513] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  198.010193] ata1.00: configured for UDMA/100
[  198.010214] ata1: EH complete
[  198.022817] ata1.00: exception Emask 0x0 SAct 0x3000 SErr 0x0 action 0x6
[  198.022822] ata1.00: irq_stat 0x40000008
[  198.022825] ata1.00: failed command: READ FPDMA QUEUED
[  198.022830] ata1.00: cmd 60/68:60:88:17:da/00:00:37:00:00/40 tag 12 ncq dma 53248 in
                        res 41/84:68:c8:17:da/00:00:37:00:00/00 Emask 0x410 (ATA bus error) <F>
[  198.022832] ata1.00: status: { DRDY ERR }
[  198.022833] ata1.00: error: { ICRC ABRT }
[  198.022838] ata1: hard resetting link
[  198.337423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  198.498372] ata1.00: configured for UDMA/100
[  198.498398] ata1: EH complete
[  198.650912] ata1.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6
[  198.650916] ata1.00: irq_stat 0x40000008
[  198.650919] ata1.00: failed command: READ FPDMA QUEUED
[  198.650924] ata1.00: cmd 60/08:20:78:a8:46/00:00:00:00:00/40 tag 4 ncq dma 4096 in
                        res 41/84:08:78:a8:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  198.650926] ata1.00: status: { DRDY ERR }
[  198.650928] ata1.00: error: { ICRC ABRT }
[  198.650931] ata1: hard resetting link
[  198.965254] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  199.119572] ata1.00: configured for UDMA/100
[  199.119587] ata1: EH complete
[  199.154740] ata1.00: exception Emask 0x0 SAct 0x3c00 SErr 0x0 action 0x6
[  199.154744] ata1.00: irq_stat 0x40000008
[  199.154747] ata1.00: failed command: READ FPDMA QUEUED
[  199.154752] ata1.00: cmd 60/80:50:80:a8:46/01:00:00:00:00/40 tag 10 ncq dma 196608 in
                        res 41/84:80:c0:a8:46/00:01:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  199.154754] ata1.00: status: { DRDY ERR }
[  199.154755] ata1.00: error: { ICRC ABRT }
[  199.154759] ata1: hard resetting link
[  199.468980] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  199.629954] ata1.00: configured for UDMA/100
[  199.629982] ata1: EH complete
[  199.642684] ata1.00: limiting speed to UDMA/33:PIO4
[  199.642687] ata1.00: exception Emask 0x0 SAct 0x180000 SErr 0x0 action 0x6
[  199.642691] ata1.00: irq_stat 0x40000008
[  199.642694] ata1.00: failed command: READ FPDMA QUEUED
[  199.642698] ata1.00: cmd 60/38:98:40:a8:46/00:00:00:00:00/40 tag 19 ncq dma 28672 in
                        res 41/84:38:48:a8:46/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[  199.642700] ata1.00: status: { DRDY ERR }
[  199.642702] ata1.00: error: { ICRC ABRT }
[  199.642705] ata1: hard resetting link
[  199.957142] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  200.118128] ata1.00: configured for UDMA/33
[  200.118147] ata1: EH complete
[  203.344932] r8169 0000:01:00.0: invalid short VPD tag 00 at offset 1
