[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7816204K/8068912K available (6264K kernel code, 1142K rwdata, 2864K rodata, 1348K init, 688K bss, 252708K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.266 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.53 BogoMIPS (lpj=9577064)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000058] ACPI: Core revision 20160831
[    0.018938] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.019008] Security Framework initialized
[    0.019009] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.019015] AppArmor: AppArmor disabled by boot time parameter
[    0.019635] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.021771] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.022712] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.022724] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023082] CPU: Physical Processor ID: 0
[    0.023083] CPU: Processor Core ID: 0
[    0.023088] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023089] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023094] mce: CPU supports 7 MCE banks
[    0.023105] CPU0: Thermal monitoring enabled (TM1)
[    0.023120] process: using mwait in idle threads
[    0.023124] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.023125] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.023935] Freeing SMP alternatives memory: 24K (ffffffff9c270000 - ffffffff9c276000)
[    0.025895] ftrace: allocating 25166 entries in 99 pages
[    0.039215] smpboot: Max logical packages: 4
[    0.039821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079512] TSC deadline timer enabled
[    0.079515] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.079520] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.079570] ... version:                3
[    0.079570] ... bit width:              48
[    0.079571] ... generic registers:      4
[    0.079572] ... value mask:             0000ffffffffffff
[    0.079573] ... max period:             00007fffffffffff
[    0.079574] ... fixed-purpose events:   3
[    0.079574] ... event mask:             000000070000000f
[    0.119815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.159728] x86: Booting SMP configuration:
[    0.159730] .... node  #0, CPUs:      #1 #2 #3
[    0.226470] x86: Booted up 1 node, 4 CPUs
[    0.226473] smpboot: Total of 4 processors activated (19154.12 BogoMIPS)
[    0.231454] devtmpfs: initialized
[    0.231539] x86/mm: Memory block size: 128MB
[    0.234783] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
[    0.234896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.234914] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.234982] pinctrl core: initialized pinctrl subsystem
[    0.235143] NET: Registered protocol family 16
[    0.251121] cpuidle: using governor ladder
[    0.263126] cpuidle: using governor menu
[    0.263158] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.263159] ACPI: bus type PCI registered
[    0.263161] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.263359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.263361] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.263367] PCI: Using configuration type 1 for base access
[    0.263416] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.279290] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.279291] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.279596] ACPI: Added _OSI(Module Device)
[    0.279597] ACPI: Added _OSI(Processor Device)
[    0.279598] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.279600] ACPI: Added _OSI(Processor Aggregator Device)
[    0.279607] ACPI : EC: EC started
[    0.279608] ACPI : EC: interrupt blocked
[    0.280888] ACPI: \: Used as first EC
[    0.280890] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.280891] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.286863] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.292710] ACPI: Dynamic OEM Table Load:
[    0.292723] ACPI: SSDT 0xFFFF8C91149F8000 000436 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.293213] ACPI: Dynamic OEM Table Load:
[    0.293226] ACPI: SSDT 0xFFFF8C9114A29800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.293801] ACPI: Dynamic OEM Table Load:
[    0.293811] ACPI: SSDT 0xFFFF8C91149FB800 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.295095] ACPI : EC: EC stopped
[    0.295096] ACPI : EC: EC started
[    0.295097] ACPI : EC: interrupt blocked
[    0.295331] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[    0.295333] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.295335] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[    0.295336] ACPI: Interpreter enabled
[    0.295370] ACPI: (supports S0 S3 S4 S5)
[    0.295371] ACPI: Using IOAPIC for interrupt routing
[    0.295403] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.299857] ACPI: Power Resource [PUBS] (on)
[    0.301208] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.306492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.306603] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[    0.306711] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.306818] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[    0.306923] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.307005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.307114] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.307229] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[    0.307345] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.307350] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.307512] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.307583] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.307585] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.307587] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.307589] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.307813] PCI host bridge to bus 0000:00
[    0.307816] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.307818] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.307819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.307823] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.307825] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.307834] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.307946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.307959] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.307967] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.307973] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.308080] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.308091] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    0.308222] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.308239] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    0.308303] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.308345] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.308395] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.308415] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
[    0.308489] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.308577] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[    0.308592] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    0.308600] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
[    0.308608] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.308669] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.308711] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.308762] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.308778] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    0.308849] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.308937] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[    0.309006] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.309154] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[    0.309230] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.309326] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.309382] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.309401] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    0.309492] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.309536] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.309586] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.309779] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.309792] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.309800] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    0.309807] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.309815] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    0.309822] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.309829] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    0.309867] pci 0000:00:1f.2: PME# supported from D3hot
[    0.309950] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.309965] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    0.309986] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.310154] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.310183] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.310330] pci 0000:02:00.0: supports D1 D2
[    0.310331] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.319200] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.319205] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.319425] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    0.319514] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.319903] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.331337] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.331342] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.332944] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.333051] ACPI : EC: interrupt unblocked
[    0.333059] ACPI : EC: event unblocked
[    0.333066] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.333068] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.333296] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.333298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.333301] vgaarb: loaded
[    0.333302] vgaarb: bridge control possible 0000:00:02.0
[    0.333381] PCI: Using ACPI for IRQ routing
[    0.334852] PCI: pci_cache_line_size set to 64 bytes
[    0.335192] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.335193] e820: reserve RAM buffer [mem 0xce230000-0xcfffffff]
[    0.335195] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.335385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.335392] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.337414] clocksource: Switched to clocksource hpet
[    0.346239] VFS: Disk quotas dquot_6.6.0
[    0.346270] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.346384] pnp: PnP ACPI init
[    0.346951] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.346954] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.346955] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.346957] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.346959] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.346961] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.346962] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.346964] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.346966] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.346968] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.346969] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.346971] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.346973] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.346975] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.346977] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.346979] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.346983] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.347144] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.347173] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.347175] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.347177] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.347179] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.347181] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.347182] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.347184] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.347187] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.347188] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.347190] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.347192] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.347194] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.347196] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.347198] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.347200] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.347202] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.347204] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.347205] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.347207] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.347209] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.347212] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347287] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.347317] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.347346] pnp 00:04: Plug and Play ACPI device, IDs LEN0035 PNP0f13 (active)
[    0.347985] pnp: PnP ACPI: found 5 devices
[    0.354630] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.354653] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.354659] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.354666] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.354671] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.354680] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.354682] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.354683] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.354685] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.354687] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.354688] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.354832] NET: Registered protocol family 2
[    0.355080] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.355239] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.355407] TCP: Hash tables configured (established 65536 bind 65536)
[    0.355436] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.355468] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.355552] NET: Registered protocol family 1
[    0.355569] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.356118] PCI: CLS 64 bytes, default 64
[    0.356177] Unpacking initramfs...
[    1.296141] Freeing initrd memory: 42940K (ffff8c8f32c12000 - ffff8c8f35601000)
[    1.296144] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.296147] software IO TLB [mem 0xca230000-0xce230000] (64MB) mapped at [ffff8c8fca230000-ffff8c8fce22ffff]
[    1.296641] audit: initializing netlink subsys (disabled)
[    1.296662] audit: type=2000 audit(1509932643.284:1): initialized
[    1.297189] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.297232] zbud: loaded
[    1.298096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.298134] io scheduler noop registered
[    1.298135] io scheduler deadline registered
[    1.298150] io scheduler cfq registered (default)
[    1.298524] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.298530] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.298549] intel_idle: MWAIT substates: 0x11142120
[    1.298550] intel_idle: v0.4.1 model 0x45
[    1.298847] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.299094] GHES: HEST is not enabled!
[    1.299164] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.299635] Linux agpgart interface v0.103
[    1.299727] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.299727] AMD IOMMUv2 functionality not available on this system
[    1.300163] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.304792] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.304804] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.304985] mousedev: PS/2 mouse device common for all mice
[    1.305016] rtc_cmos 00:02: RTC can wake from S4
[    1.305191] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.305221] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.305294] ledtrig-cpu: registered to indicate activity on CPUs
[    1.305883] NET: Registered protocol family 10
[    1.306238] mip6: Mobile IPv6
[    1.306241] NET: Registered protocol family 17
[    1.306244] mpls_gso: MPLS GSO support
[    1.306481] microcode: sig=0x40651, pf=0x40, revision=0x17
[    1.306550] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.306699] registered taskstats version 1
[    1.306716] zswap: loaded using pool lzo/zbud
[    1.306829] ima: No TPM chip found, activating TPM-bypass!
[    1.307359] rtc_cmos 00:02: setting system clock to 2017-11-06 01:44:04 UTC (1509932644)
[    1.307443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.307454] PM: Hibernation image not present or could not be loaded.
[    1.308799] Freeing unused kernel memory: 1348K (ffffffff9c11f000 - ffffffff9c270000)
[    1.308800] Write protecting the kernel read-only data: 12288k
[    1.309397] Freeing unused kernel memory: 1912K (ffff8c9054e22000 - ffff8c9055000000)
[    1.313694] Freeing unused kernel memory: 1232K (ffff8c90552cc000 - ffff8c9055400000)
[    1.320597] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.363714] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.363907] ACPI: Lid Switch [LID]
[    1.364029] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.364034] ACPI: Sleep Button [SLPB]
[    1.364159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.364164] ACPI: Power Button [PWRF]
[    1.371877] wmi: Mapper loaded
[    1.373032] pps_core: LinuxPPS API ver. 1 registered
[    1.373034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.373539] PTP clock support registered
[    1.374928] [drm] Initialized
[    1.376368] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.376369] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.376615] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.376955] ACPI: bus type USB registered
[    1.376996] usbcore: registered new interface driver usbfs
[    1.377016] usbcore: registered new interface driver hub
[    1.377337] usbcore: registered new device driver usb
[    1.378205] SCSI subsystem initialized
[    1.378742] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.379256] ehci-pci: EHCI PCI platform driver
[    1.381637] libata version 3.00 loaded.
[    1.383342] thermal LNXTHERM:00: registered as thermal_zone0
[    1.383344] ACPI: Thermal Zone [THM0] (35 C)
[    1.384436] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[    1.634242] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.703057] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:9b:7e:9d
[    1.703065] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.703092] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    1.703333] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.703343] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.703359] ehci-pci 0000:00:1d.0: debug port 2
[    1.703990] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.707274] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.707293] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
[    1.721609] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.721696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.721698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.721699] usb usb1: Product: EHCI Host Controller
[    1.721701] usb usb1: Manufacturer: Linux 4.9.0-deepin12-amd64 ehci_hcd
[    1.721702] usb usb1: SerialNumber: 0000:00:1d.0
[    1.721943] hub 1-0:1.0: USB hub found
[    1.721950] hub 1-0:1.0: 3 ports detected
[    1.722424] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.722435] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.723523] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.723530] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.723717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.723720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.723722] usb usb2: Product: xHCI Host Controller
[    1.723723] usb usb2: Manufacturer: Linux 4.9.0-deepin12-amd64 xhci-hcd
[    1.723724] usb usb2: SerialNumber: 0000:00:14.0
[    1.723978] hub 2-0:1.0: USB hub found
[    1.724012] hub 2-0:1.0: 9 ports detected
[    1.726047] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.726051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.726094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.726096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.726097] usb usb3: Product: xHCI Host Controller
[    1.726098] usb usb3: Manufacturer: Linux 4.9.0-deepin12-amd64 xhci-hcd
[    1.726100] usb usb3: SerialNumber: 0000:00:14.0
[    1.726302] hub 3-0:1.0: USB hub found
[    1.726316] hub 3-0:1.0: 4 ports detected
[    1.727263] ahci 0000:00:1f.2: version 3.0
[    1.737605] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    1.737609] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.738273] scsi host0: ahci
[    1.738607] scsi host1: ahci
[    1.738803] scsi host2: ahci
[    1.738898] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 43
[    1.738900] ata2: DUMMY
[    1.738902] ata3: DUMMY
[    1.739063] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.739089] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.740492] [drm] Memory usable by graphics device = 2048M
[    1.740494] [drm] Replacing VGA console driver
[    1.741191] Console: switching to colour dummy device 80x25
[    1.747453] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.747454] [drm] Driver supports precise vblank timestamp query.
[    1.747838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.758232] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.758792] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.758878] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.902044] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[    1.929322] random: fast init done
[    1.936276] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[    1.943094] fbcon: inteldrmfb (fb0) is primary device
[    2.004600] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2749, fw id: 1486693
[    2.004609] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.047635] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.049604] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.052485] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.053538] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.053540] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.053569] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    2.054463] ata1.00: ATA-8: HGST HTS725050A7E630, GS2ZC230, max UDMA/133
[    2.054465] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.055507] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.055510] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.056413] ata1.00: configured for UDMA/133
[    2.056708] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 C230 PQ: 0 ANSI: 5
[    2.195433] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[    2.195435] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.195437] usb 2-1: Product: USB Device
[    2.195438] usb 2-1: Manufacturer: A4TECH
[    2.197901] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    2.197903] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.198223] hub 1-1:1.0: USB hub found
[    2.198329] hidraw: raw HID events driver (C) Jiri Kosina
[    2.198384] hub 1-1:1.0: 8 ports detected
[    2.201519] usbcore: registered new interface driver usbhid
[    2.201520] usbhid: USB HID core driver
[    2.202504] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0001/input/input8
[    2.262148] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[    2.262358] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0002/input/input9
[    2.262787] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[    2.305614] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[    2.305623] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[    2.313646] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[    2.455770] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
[    2.455772] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.455774] usb 2-6: SerialNumber: 069c49e9f882
[    2.577633] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[    2.719081] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.719083] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.749383] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.837708] usb 2-8: new high-speed USB device number 5 using xhci_hcd
[    2.974214] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    3.046144] usb 2-8: New USB device found, idVendor=04f2, idProduct=b39a
[    3.046147] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.046148] usb 2-8: Product: Integrated Camera
[    3.046150] usb 2-8: Manufacturer: SunplusIT INC.
[    3.235953] Console: switching to colour frame buffer device 170x48
[    3.329757] clocksource: Switched to clocksource tsc
[    3.438832] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.456409] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.456412] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.456439] sd 0:0:0:0: [sda] Write Protect is off
[    3.456441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.456453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.539161]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    3.540314] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.283269] md: linear personality registered for level -1
[    4.284944] md: multipath personality registered for level -4
[    4.286528] md: raid0 personality registered for level 0
[    4.288351] md: raid1 personality registered for level 1
[    4.357755] raid6: sse2x1   gen()  5083 MB/s
[    4.425757] raid6: sse2x1   xor()  3823 MB/s
[    4.493745] raid6: sse2x2   gen()  6404 MB/s
[    4.561753] raid6: sse2x2   xor()  4350 MB/s
[    4.629758] raid6: sse2x4   gen()  7419 MB/s
[    4.697761] raid6: sse2x4   xor()  5246 MB/s
[    4.765769] raid6: avx2x1   gen()  9896 MB/s
[    4.833786] raid6: avx2x2   gen() 11351 MB/s
[    4.901804] raid6: avx2x4   gen() 13152 MB/s
[    4.901806] raid6: using algorithm avx2x4 gen() 13152 MB/s
[    4.901807] raid6: using avx2x2 recovery algorithm
[    4.902115] xor: automatically using best checksumming function   avx       
[    4.902336] async_tx: api initialized (async)
[    4.908286] md: raid6 personality registered for level 6
[    4.908288] md: raid5 personality registered for level 5
[    4.908289] md: raid4 personality registered for level 4
[    4.912950] md: raid10 personality registered for level 10
[    5.862266] Btrfs loaded, crc32c=crc32c-intel
[    6.385587] PM: Starting manual resume from disk
[    6.385590] PM: Hibernation image partition 8:5 present
[    6.385592] PM: Looking for hibernation image.
[    6.385696] PM: Image not found (code -22)
[    6.385697] PM: Hibernation image not present or could not be loaded.
[    7.166567] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.967567] random: crng init done
[    7.986846] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[    8.833988] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.916877] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    8.917126] systemd[1]: Detected architecture x86-64.
[    8.927999] systemd[1]: Set hostname to <eleven220-pc>.
[    9.954859] systemd[1]: Unnecessary job for HGST_HTS725050A7E630 6 was removed.
[    9.955324] systemd[1]: Listening on Journal Socket.
[    9.955469] systemd[1]: Listening on udev Control Socket.
[    9.955493] systemd[1]: Reached target Remote File Systems.
[    9.957865] systemd[1]: Listening on Process Core Dump Socket.
[    9.958132] systemd[1]: Created slice User and Session Slice.
[    9.958188] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.387602] lp: driver loaded but no devices found
[   10.406573] ppdev: user-space parallel port driver
[   10.533211] fuse init (API version 7.26)
[   11.399863] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[   11.426463] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[   11.644077] ACPI: Battery Slot [BAT0] (battery present)
[   11.655206] ACPI: Battery Slot [BAT1] (battery present)
[   11.655454] ACPI: AC Adapter [AC] (on-line)
[   11.778136] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   11.825028] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   11.825031] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   11.825032] RAPL PMU: hw unit of domain package 2^-14 Joules
[   11.825034] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   11.825035] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   12.050107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.055754] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.322581] Intel(R) Wireless WiFi driver for Linux
[   12.322583] Copyright(c) 2003- 2015 Intel Corporation
[   12.336642] Non-volatile memory driver v1.3
[   12.424738] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.424739] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.424740] thinkpad_acpi: ThinkPad BIOS GIET74WW (2.24 ), EC unknown
[   12.424741] thinkpad_acpi: Lenovo ThinkPad X240, model 20AMA37DCD
[   12.425927] thinkpad_acpi: radio switch found; radios are enabled
[   12.425955] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   12.425956] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   12.427791] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   12.457777] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[   12.544424] wl: loading out-of-tree module taints kernel.
[   12.544428] wl: module license 'MIXED/Proprietary' taints kernel.
[   12.544429] Disabling lock debugging due to kernel taint
[   12.553492] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.633771] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.633774] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.633776] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[   12.633777] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   12.633778] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   12.633780] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[   12.633781] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   12.633783] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   12.656802] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   12.656997] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   12.657066] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   12.657136] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   12.657194] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   12.659754] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
[   12.659988] iwlwifi 0000:03:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[   12.776356] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   12.776440] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   12.776516] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[   12.793340] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[   12.795675] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   12.796195] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   12.867114] Bluetooth: Core ver 2.22
[   12.867127] NET: Registered protocol family 31
[   12.867127] Bluetooth: HCI device and connection manager initialized
[   12.867130] Bluetooth: HCI socket layer initialized
[   12.867132] Bluetooth: L2CAP socket layer initialized
[   12.867140] Bluetooth: SCO socket layer initialized
[   13.015189] intel_rapl: Found RAPL domain package
[   13.015191] intel_rapl: Found RAPL domain core
[   13.015192] intel_rapl: Found RAPL domain uncore
[   13.015193] intel_rapl: Found RAPL domain dram
[   13.030514] usbcore: registered new interface driver btusb
[   13.042865] Bluetooth: hci0: read Intel version: 370710018002030d00
[   13.068234] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   13.126074] media: Linux media interface: v0.10
[   13.130912] iTCO_vendor_support: vendor-support=0
[   13.132779] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.132822] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[   13.132940] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.143443] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   13.143447] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   13.154588] Linux video capture interface: v2.00
[   13.267899] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   13.322065] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
[   13.330628] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[   13.330631] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
[   13.330633] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[   13.330635] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[   13.330743] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input20
[   13.330827] usbcore: registered new interface driver uvcvideo
[   13.330827] USB Video Class driver (1.1.1)
[   13.856210] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   14.928188] Adding 8067068k swap on /dev/sda5.  Priority:-1 extents:1 across:8067068k FS
[   15.789956] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[   15.839376] systemd-journald[281]: Received request to flush runtime journal from PID 1
[   16.354258] systemd-journald[281]: File /var/log/journal/7c1ef2230f334fbf85d1fb1dc74cecf4/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   17.432002] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[   24.128349] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[   26.451246] vboxdrv: Found 4 processor cores
[   26.471720] vboxdrv: TSC mode is Invariant, tentative frequency 2394435697 Hz
[   26.471722] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[   26.981281] VBoxNetFlt: Successfully started.
[   27.035405] VBoxNetAdp: Successfully started.
[   27.163135] VBoxPciLinuxInit
[   27.227574] vboxpci: IOMMU not found (not registered)
[   31.891210] NET: Registered protocol family 15
[   32.802190] Initializing XFRM netlink socket
[   44.197326] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   44.381125] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   44.385176] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   44.387561] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   44.388081] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   44.593673] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   44.594196] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   44.620071] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   45.988537] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   45.988541] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[   45.988571] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   46.251384] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   47.290015] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[   47.295478] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[   47.305873] wlp3s0: authenticated
[   47.309181] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[   47.345380] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=6)
[   47.347053] wlp3s0: associated
[   47.347095] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   62.825619] systemd-journald[281]: File /var/log/journal/7c1ef2230f334fbf85d1fb1dc74cecf4/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[  114.844672] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[  965.603376] usb 2-1: USB disconnect, device number 2
[  971.280195] usb 2-1: new full-speed USB device number 6 using xhci_hcd
[  971.422194] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[  971.422198] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  971.422201] usb 2-1: Product: USB Device
[  971.422203] usb 2-1: Manufacturer: A4TECH
[  971.426536] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0003/input/input21
[  971.484926] hid-generic 0003:09DA:054F.0003: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[  971.486396] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0004/input/input22
[  971.486699] hid-generic 0003:09DA:054F.0004: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[ 3849.194644] usb 2-1: USB disconnect, device number 6
[ 3849.810865] thinkpad_acpi: EC reports that Thermal Table has changed
[ 3850.741881] e1000e: enp0s25 NIC Link is Down
[ 3851.709752] usb 2-1: new full-speed USB device number 7 using xhci_hcd
[ 3851.851832] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[ 3851.851838] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3851.851842] usb 2-1: Product: USB Device
[ 3851.851845] usb 2-1: Manufacturer: A4TECH
[ 3851.854708] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0005/input/input23
[ 3851.914521] hid-generic 0003:09DA:054F.0005: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[ 3851.916309] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0006/input/input24
[ 3851.916747] hid-generic 0003:09DA:054F.0006: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[ 3890.592363] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 3890.592369] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 9961.210137] PM: Syncing filesystems ... done.
[ 9961.466950] PM: Preparing system for sleep (mem)
[ 9961.467210] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 9961.467528] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[ 9961.467540] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 9961.470189] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9961.471445] PM: Suspending system (mem)
[ 9961.471473] Suspending console(s) (use no_console_suspend to debug)
[ 9961.471924] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9961.567079] sd 0:0:0:0: [sda] Stopping disk
[ 9961.674709] e1000e: EEE TX LPI TIMER: 00000011
[ 9962.791500] PM: suspend of devices complete after 1319.781 msecs
[ 9962.808161] PM: late suspend of devices complete after 16.655 msecs
[ 9962.810104] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 9962.810156] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 9962.810228] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 9962.860054] PM: noirq suspend of devices complete after 51.887 msecs
[ 9962.860402] ACPI: Preparing to enter system sleep state S3
[ 9963.148089] ACPI : EC: event blocked
[ 9963.148089] ACPI : EC: EC stopped
[ 9963.148090] PM: Saving platform NVS memory
[ 9963.148105] Disabling non-boot CPUs ...
[ 9963.172360] Broke affinity for irq 42
[ 9963.173718] smpboot: CPU 1 is now offline
[ 9963.192321] Broke affinity for irq 42
[ 9963.192323] Broke affinity for irq 44
[ 9963.192325] Broke affinity for irq 46
[ 9963.193346] smpboot: CPU 2 is now offline
[ 9963.220228] Broke affinity for irq 1
[ 9963.220236] Broke affinity for irq 9
[ 9963.220240] Broke affinity for irq 12
[ 9963.220249] Broke affinity for irq 23
[ 9963.220252] Broke affinity for irq 42
[ 9963.220253] Broke affinity for irq 43
[ 9963.220254] Broke affinity for irq 44
[ 9963.220255] Broke affinity for irq 46
[ 9963.221264] smpboot: CPU 3 is now offline
[ 9963.222698] ACPI: Low-level resume complete
[ 9963.222759] ACPI : EC: EC started
[ 9963.222760] PM: Restoring platform NVS memory
[ 9963.223091] Suspended for 4299.266 seconds
[ 9963.223141] Enabling non-boot CPUs ...
[ 9963.223201] x86: Booting SMP configuration:
[ 9963.223201] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9963.225791]  cache: parent cpu1 should not be sleeping
[ 9963.226134] CPU1 is up
[ 9963.226182] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 9963.228610]  cache: parent cpu2 should not be sleeping
[ 9963.228993] CPU2 is up
[ 9963.229037] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9963.231570]  cache: parent cpu3 should not be sleeping
[ 9963.232044] CPU3 is up
[ 9963.235364] ACPI: Waking up from system sleep state S3
[ 9963.585701] thinkpad_acpi: EC reports that Thermal Table has changed
[ 9963.941548] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 9963.941587] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9963.941660] PM: noirq resume of devices complete after 52.094 msecs
[ 9963.942042] PM: early resume of devices complete after 0.362 msecs
[ 9963.942119] usb usb2: root hub lost power or was reset
[ 9963.942121] usb usb3: root hub lost power or was reset
[ 9963.942208] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 9963.942306] ACPI : button: The lid device is not compliant to SW_LID.
[ 9963.942316] ACPI : EC: event unblocked
[ 9963.943299] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 9963.952505] sd 0:0:0:0: [sda] Starting disk
[ 9964.181580] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 9964.333589] usb 2-1: reset full-speed USB device number 7 using xhci_hcd
[ 9964.364877] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[ 9964.400060] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[ 9964.593652] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[ 9964.853649] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[ 9965.113675] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[ 9965.311688] PM: resume of devices complete after 1369.561 msecs
[ 9965.311804] usb 2-7:1.0: rebind failed: -517
[ 9965.311807] usb 2-7:1.1: rebind failed: -517
[ 9965.312035] PM: Finishing wakeup.
[ 9965.312036] Restarting tasks ... done.
[ 9965.336255] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 9965.336280] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 9965.465251] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 9965.585662] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9965.586789] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9965.586794] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9965.588949] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9965.588952] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9965.589973] ata1.00: configured for UDMA/133
[ 9965.897058] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9965.897062] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 9966.122003] e1000e: enp0s25 NIC Link is Down
[ 9966.146641] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9966.346090] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9966.348025] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9966.349849] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9966.350380] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9966.564165] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9966.564792] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9966.590543] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9966.666996] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9967.316062] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9967.877788] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9967.877793] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 9967.877826] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[13136.018279] tun: Universal TUN/TAP device driver, 1.6
[13136.018281] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[14864.924351] perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[15979.415267] Chrome_IOThread[2014]: segfault at ffffcd56445cc1ac ip 000000858654346d sp 00007fa29415b5e8 error 5 in chrome[85852ac000+6ce3000]
[16773.090092] perf: interrupt took too long (3170 > 3146), lowering kernel.perf_event_max_sample_rate to 63000
[21383.527102] perf: interrupt took too long (3978 > 3962), lowering kernel.perf_event_max_sample_rate to 50250
[27916.538726] perf: interrupt took too long (4990 > 4972), lowering kernel.perf_event_max_sample_rate to 40000
[27930.246479] usb 2-1: USB disconnect, device number 7
[27931.642839] thinkpad_acpi: EC reports that Thermal Table has changed
[27932.685931] e1000e: enp0s25 NIC Link is Down
[27935.277459] PM: Syncing filesystems ... done.
[27935.642526] PM: Preparing system for sleep (mem)
[27935.642993] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[27935.643006] Freezing user space processes ... (elapsed 0.002 seconds) done.
[27935.645125] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[27935.645890] PM: Suspending system (mem)
[27935.645923] Suspending console(s) (use no_console_suspend to debug)
[27935.650384] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[27935.813242] sd 0:0:0:0: [sda] Stopping disk
[27935.840550] e1000e: EEE TX LPI TIMER: 00000011
[27937.101398] PM: suspend of devices complete after 1455.197 msecs
[27937.118002] PM: late suspend of devices complete after 16.600 msecs
[27937.119135] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[27937.119225] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[27937.119253] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[27937.169958] PM: noirq suspend of devices complete after 51.949 msecs
[27937.170306] ACPI: Preparing to enter system sleep state S3
[27937.457998] ACPI : EC: event blocked
[27937.457999] ACPI : EC: EC stopped
[27937.457999] PM: Saving platform NVS memory
[27937.458015] Disabling non-boot CPUs ...
[27937.482250] Broke affinity for irq 42
[27937.483276] smpboot: CPU 1 is now offline
[27937.506228] Broke affinity for irq 42
[27937.506231] Broke affinity for irq 44
[27937.506233] Broke affinity for irq 46
[27937.507500] smpboot: CPU 2 is now offline
[27937.538122] Broke affinity for irq 1
[27937.538130] Broke affinity for irq 9
[27937.538134] Broke affinity for irq 12
[27937.538143] Broke affinity for irq 23
[27937.538146] Broke affinity for irq 42
[27937.538147] Broke affinity for irq 43
[27937.538149] Broke affinity for irq 44
[27937.538150] Broke affinity for irq 46
[27937.539170] smpboot: CPU 3 is now offline
[27937.540707] ACPI: Low-level resume complete
[27937.540769] ACPI : EC: EC started
[27937.540769] PM: Restoring platform NVS memory
[27937.541100] Suspended for 1470.220 seconds
[27937.541149] Enabling non-boot CPUs ...
[27937.541208] x86: Booting SMP configuration:
[27937.541209] smpboot: Booting Node 0 Processor 1 APIC 0x1
[27937.543773]  cache: parent cpu1 should not be sleeping
[27937.544112] CPU1 is up
[27937.544168] smpboot: Booting Node 0 Processor 2 APIC 0x2
[27937.546575]  cache: parent cpu2 should not be sleeping
[27937.546952] CPU2 is up
[27937.546997] smpboot: Booting Node 0 Processor 3 APIC 0x3
[27937.549534]  cache: parent cpu3 should not be sleeping
[27937.550000] CPU3 is up
[27937.553275] ACPI: Waking up from system sleep state S3
[27938.227491] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[27938.227532] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[27938.227589] PM: noirq resume of devices complete after 52.085 msecs
[27938.227940] PM: early resume of devices complete after 0.332 msecs
[27938.228038] usb usb2: root hub lost power or was reset
[27938.228040] usb usb3: root hub lost power or was reset
[27938.228220] ACPI : EC: event unblocked
[27938.229994] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[27938.230270] rtc_cmos 00:02: System wakeup disabled by ACPI
[27938.231503] sd 0:0:0:0: [sda] Starting disk
[27938.467492] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[27938.619537] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[27938.649459] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[27938.684018] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[27938.879663] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[27939.139596] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[27939.337502] PM: resume of devices complete after 1109.475 msecs
[27939.337605] usb 2-7:1.0: rebind failed: -517
[27939.337607] usb 2-7:1.1: rebind failed: -517
[27939.337831] PM: Finishing wakeup.
[27939.337833] Restarting tasks ... done.
[27939.362081] Bluetooth: hci0: read Intel version: 370710018002030d00
[27939.362194] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[27939.362197] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[27939.557121] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[27939.923639] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[27939.924761] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[27939.924764] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[27939.927026] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[27939.927029] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[27939.928084] ata1.00: configured for UDMA/133
[27940.604985] e1000e: enp0s25 NIC Link is Down
[27940.605811] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[27940.795979] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[27940.799526] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27940.802169] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[27940.802795] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[27941.019953] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[27941.020580] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[27941.043909] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27941.213602] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27941.742989] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27946.284303] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[27946.289755] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[27946.302413] wlp3s0: authenticated
[27946.304068] wlp3s0: associate with 78:a3:51:0c:ba:14 (try 1/3)
[27946.306087] wlp3s0: RX AssocResp from 78:a3:51:0c:ba:14 (capab=0xc31 status=0 aid=1)
[27946.308569] wlp3s0: associated
[27946.308625] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[38128.884740] thinkpad_acpi: EC reports that Thermal Table has changed
[49816.905513] dde-launcher[1909]: segfault at 7f81085c4c80 ip 00007f813f92e863 sp 00007ffe345fc2f0 error 4 in libQt5Gui.so.5.6.1[7f813f7a6000+56a000]
[49816.908286] deepin-notifica[27916]: segfault at 7facb30dfc80 ip 00007face1f47863 sp 00007ffe57197950 error 4 in libQt5Gui.so.5.6.1[7face1dbf000+56a000]
[49816.936538] dde-control-cen[1500]: segfault at 7f219b50dc80 ip 00007f21cc2ad863 sp 00007ffe21596ea0 error 4 in libQt5Gui.so.5.6.1[7f21cc125000+56a000]
[78919.333457] thinkpad_acpi: EC reports that Thermal Table has changed
[79185.069257] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[79185.073007] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[79185.159381] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 2/3)
[79185.234255] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 3/3)
[79185.314058] wlp3s0: authentication with 78:a3:51:0c:ba:14 timed out
[79200.025893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79227.718888] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[79227.724477] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[79227.731427] wlp3s0: authenticated
[79227.732069] wlp3s0: associate with 78:a3:51:0c:ba:14 (try 1/3)
[79227.743284] wlp3s0: RX AssocResp from 78:a3:51:0c:ba:14 (capab=0xc31 status=0 aid=1)
[79227.746901] wlp3s0: associated
[79227.746914] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79277.023855] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79277.411031] wlp3s0: authenticate with 08:19:a6:06:c6:04
[79277.416533] wlp3s0: send auth to 08:19:a6:06:c6:04 (try 1/3)
[79277.517495] wlp3s0: authenticated
[79277.519326] wlp3s0: associate with 08:19:a6:06:c6:04 (try 1/3)
[79277.539153] wlp3s0: RX AssocResp from 08:19:a6:06:c6:04 (capab=0x421 status=0 aid=2)
[79277.540460] wlp3s0: associated
[79277.540525] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79278.030634] iwlwifi 0000:03:00.0: No association and the time event is over already...
[79278.030700] wlp3s0: Connection to AP 08:19:a6:06:c6:04 lost
[79278.204700] wlp3s0: authenticate with 4c:1f:cc:79:94:b7
[79278.210352] wlp3s0: send auth to 4c:1f:cc:79:94:b7 (try 1/3)
[79278.250261] wlp3s0: authenticated
[79278.251360] wlp3s0: associate with 4c:1f:cc:79:94:b7 (try 1/3)
[79278.279648] wlp3s0: RX AssocResp from 4c:1f:cc:79:94:b7 (capab=0x421 status=0 aid=1)
[79278.281227] wlp3s0: associated
[79291.916441] wlp3s0: authenticate with 4c:1f:cc:79:94:b7
[79291.920276] wlp3s0: send auth to 4c:1f:cc:79:94:b7 (try 1/3)
[79291.933716] wlp3s0: authenticated
[79291.936206] wlp3s0: associate with 4c:1f:cc:79:94:b7 (try 1/3)
[79291.972607] wlp3s0: RX AssocResp from 4c:1f:cc:79:94:b7 (capab=0x421 status=0 aid=1)
[79291.975612] wlp3s0: associated
[79295.729535] wlp3s0: authenticate with 4c:1f:cc:79:94:b7
[79295.734746] wlp3s0: send auth to 4c:1f:cc:79:94:b7 (try 1/3)
[79295.818416] wlp3s0: send auth to 4c:1f:cc:79:94:b7 (try 2/3)
[79295.989442] wlp3s0: send auth to 4c:1f:cc:79:94:b7 (try 3/3)
[79296.051131] wlp3s0: authentication with 4c:1f:cc:79:94:b7 timed out
[79311.031360] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79311.425435] wlp3s0: authenticate with 24:09:95:8e:3d:66
[79311.431182] wlp3s0: send auth to 24:09:95:8e:3d:66 (try 1/3)
[79311.454188] wlp3s0: authenticated
[79311.457549] wlp3s0: associate with 24:09:95:8e:3d:66 (try 1/3)
[79311.499842] wlp3s0: RX AssocResp from 24:09:95:8e:3d:66 (capab=0x8431 status=0 aid=1)
[79311.501423] wlp3s0: associated
[79311.501493] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79337.104919] wlp3s0: authenticate with 24:09:95:8e:3d:66
[79337.109595] wlp3s0: send auth to 24:09:95:8e:3d:66 (try 1/3)
[79337.178712] wlp3s0: send auth to 24:09:95:8e:3d:66 (try 2/3)
[79337.286711] wlp3s0: send auth to 24:09:95:8e:3d:66 (try 3/3)
[79337.367633] wlp3s0: authentication with 24:09:95:8e:3d:66 timed out
[79361.728960] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79907.365891] wlp3s0: authenticate with 00:23:89:78:b1:20
[79907.370703] wlp3s0: send auth to 00:23:89:78:b1:20 (try 1/3)
[79907.380614] wlp3s0: authenticated
[79907.384168] wlp3s0: associate with 00:23:89:78:b1:20 (try 1/3)
[79907.430067] wlp3s0: RX AssocResp from 00:23:89:78:b1:20 (capab=0x421 status=0 aid=4)
[79907.431986] wlp3s0: associated
[79907.431994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79917.797466] wlp3s0: authenticate with 00:23:89:78:b1:20
[79917.801728] wlp3s0: send auth to 00:23:89:78:b1:20 (try 1/3)
[79917.882896] wlp3s0: send auth to 00:23:89:78:b1:20 (try 2/3)
[79918.017638] wlp3s0: send auth to 00:23:89:78:b1:20 (try 3/3)
[79918.121343] wlp3s0: authentication with 00:23:89:78:b1:20 timed out
[79952.784179] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[79991.359527] wlp3s0: authenticate with 58:66:ba:ea:4c:50
[79991.364311] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 1/3)
[79991.439012] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 2/3)
[79991.499284] wlp3s0: authenticated
[79991.501686] wlp3s0: associate with 58:66:ba:ea:4c:50 (try 1/3)
[79991.576710] wlp3s0: associate with 58:66:ba:ea:4c:50 (try 2/3)
[79991.585214] wlp3s0: RX AssocResp from 58:66:ba:ea:4c:50 (capab=0x8421 status=0 aid=2)
[79991.593770] wlp3s0: associated
[79991.593786] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[79996.629860] wlp3s0: disassociated from 58:66:ba:ea:4c:50 (Reason: 4)
[79996.681094] wlp3s0: authenticate with 58:66:ba:ea:4c:50
[79996.687524] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 1/3)
[79996.733037] wlp3s0: authenticated
[79996.733954] wlp3s0: associate with 58:66:ba:ea:4c:50 (try 1/3)
[79996.751092] wlp3s0: RX AssocResp from 58:66:ba:ea:4c:50 (capab=0x8421 status=0 aid=2)
[79996.759552] wlp3s0: associated
[80019.151587] wlp3s0: authenticate with 58:66:ba:ea:4c:50
[80019.156394] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 1/3)
[80019.265744] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 2/3)
[80019.413347] wlp3s0: send auth to 58:66:ba:ea:4c:50 (try 3/3)
[80019.530996] wlp3s0: authentication with 58:66:ba:ea:4c:50 timed out
[80034.087374] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[80084.951162] wlp3s0: authenticate with 58:6a:b1:1f:65:d0
[80084.957366] wlp3s0: send auth to 58:6a:b1:1f:65:d0 (try 1/3)
[80085.225023] wlp3s0: send auth to 58:6a:b1:1f:65:d0 (try 2/3)
[80085.411295] wlp3s0: send auth to 58:6a:b1:1f:65:d0 (try 3/3)
[80085.487234] wlp3s0: authenticated
[80085.487730] wlp3s0: associate with 58:6a:b1:1f:65:d0 (try 1/3)
[80085.560991] wlp3s0: RX AssocResp from 58:6a:b1:1f:65:d0 (capab=0x8431 status=0 aid=2)
[80085.564328] wlp3s0: associated
[80085.564341] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[80094.467245] wlp3s0: deauthenticated from 58:6a:b1:1f:65:d0 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[80094.531664] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[80146.155108] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[80146.155111] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[80146.155144] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[80159.644571] usb 2-1: new full-speed USB device number 8 using xhci_hcd
[80159.786674] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[80159.786681] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80159.786685] usb 2-1: Product: USB Device
[80159.786688] usb 2-1: Manufacturer: A4TECH
[80159.791007] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0007/input/input25
[80159.849416] hid-generic 0003:09DA:054F.0007: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[80159.851189] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0008/input/input26
[80159.851567] hid-generic 0003:09DA:054F.0008: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[80166.816022] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[80166.821045] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[80166.825612] wlp3s0: authenticated
[80166.829191] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[80166.837719] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=8)
[80166.840780] wlp3s0: associated
[80166.840863] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[80201.329150] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[81810.531909] e1000e: enp0s25 NIC Link is Down
[81837.081375] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[81837.081384] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[88315.151886] thinkpad_acpi: EC reports that Thermal Table has changed
[103040.820321] Thread (pooled)[4469]: segfault at 8 ip 00007fbaaf1b729e sp 00007fba8df719a0 error 4 in libQt5Core.so.5.6.1[7fbaaef05000+4c6000]
[117050.409482] usb 2-1: USB disconnect, device number 8
[117051.519543] thinkpad_acpi: EC reports that Thermal Table has changed
[117054.838769] e1000e: enp0s25 NIC Link is Down
[117055.311694] PM: Syncing filesystems ... done.
[117056.469311] PM: Preparing system for sleep (mem)
[117056.536504] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[117056.539555] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[117056.539609] Freezing user space processes ... (elapsed 0.002 seconds) done.
[117056.541873] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[117056.542642] PM: Suspending system (mem)
[117056.542670] Suspending console(s) (use no_console_suspend to debug)
[117056.543033] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[117056.734384] e1000e: EEE TX LPI TIMER: 00000011
[117056.859646] sd 0:0:0:0: [sda] Stopping disk
[117057.958020] PM: suspend of devices complete after 1415.148 msecs
[117057.974667] PM: late suspend of devices complete after 16.642 msecs
[117057.975711] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[117057.975740] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[117057.976060] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[117058.026635] PM: noirq suspend of devices complete after 51.963 msecs
[117058.026982] ACPI: Preparing to enter system sleep state S3
[117058.314658] ACPI : EC: event blocked
[117058.314658] ACPI : EC: EC stopped
[117058.314659] PM: Saving platform NVS memory
[117058.314674] Disabling non-boot CPUs ...
[117058.330898] Broke affinity for irq 42
[117058.330900] Broke affinity for irq 43
[117058.332285] smpboot: CPU 1 is now offline
[117058.354875] Broke affinity for irq 42
[117058.354877] Broke affinity for irq 43
[117058.355898] smpboot: CPU 2 is now offline
[117058.378785] Broke affinity for irq 1
[117058.378793] Broke affinity for irq 9
[117058.378797] Broke affinity for irq 12
[117058.378806] Broke affinity for irq 23
[117058.378809] Broke affinity for irq 42
[117058.378810] Broke affinity for irq 43
[117058.378811] Broke affinity for irq 44
[117058.378813] Broke affinity for irq 46
[117058.379825] smpboot: CPU 3 is now offline
[117058.381360] ACPI: Low-level resume complete
[117058.381420] ACPI : EC: EC started
[117058.381421] PM: Restoring platform NVS memory
[117058.381752] Suspended for 3096.127 seconds
[117058.381801] Enabling non-boot CPUs ...
[117058.381861] x86: Booting SMP configuration:
[117058.381862] smpboot: Booting Node 0 Processor 1 APIC 0x1
[117058.384423]  cache: parent cpu1 should not be sleeping
[117058.384759] CPU1 is up
[117058.384817] smpboot: Booting Node 0 Processor 2 APIC 0x2
[117058.387218]  cache: parent cpu2 should not be sleeping
[117058.387589] CPU2 is up
[117058.387636] smpboot: Booting Node 0 Processor 3 APIC 0x3
[117058.390169]  cache: parent cpu3 should not be sleeping
[117058.390631] CPU3 is up
[117058.393981] ACPI: Waking up from system sleep state S3
[117059.044092] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[117059.044129] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[117059.044184] PM: noirq resume of devices complete after 52.076 msecs
[117059.044556] PM: early resume of devices complete after 0.353 msecs
[117059.044631] usb usb2: root hub lost power or was reset
[117059.044634] usb usb3: root hub lost power or was reset
[117059.044720] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[117059.044864] ACPI : EC: event unblocked
[117059.045659] rtc_cmos 00:02: System wakeup disabled by ACPI
[117059.054988] sd 0:0:0:0: [sda] Starting disk
[117059.284104] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[117059.436128] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[117059.462211] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[117059.495123] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[117059.696129] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[117059.956172] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[117060.100145] PM: resume of devices complete after 1055.553 msecs
[117060.100245] usb 2-7:1.0: rebind failed: -517
[117060.100248] usb 2-7:1.1: rebind failed: -517
[117060.100414] PM: Finishing wakeup.
[117060.100415] Restarting tasks ... done.
[117060.124721] Bluetooth: hci0: read Intel version: 370710018002030d00
[117060.124726] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[117060.248735] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[117060.744165] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117060.745236] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[117060.745239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[117060.747385] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[117060.747387] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[117060.748455] ata1.00: configured for UDMA/133
[117061.765724] e1000e: enp0s25 NIC Link is Down
[117061.767732] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[117061.952678] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[117061.956068] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[117061.958624] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[117061.959152] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[117062.175307] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[117062.175934] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[117062.199848] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[117062.735790] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[117063.240840] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[119676.373893] usb 2-1: new high-speed USB device number 9 using xhci_hcd
[119676.515979] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[119676.515984] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[119676.515986] usb 2-1: Product: iPhone
[119676.515989] usb 2-1: Manufacturer: Apple Inc.
[119676.515991] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[119677.238418] ipheth 2-1:4.2: Apple iPhone USB Ethernet device attached
[119677.238556] usbcore: registered new interface driver ipheth
[119677.282656] ipheth 2-1:4.2 enp0s20u1c4i2: renamed from eth0
[119677.656379] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1c4i2: link is not ready
[119695.511119] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[119695.516916] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[119695.520731] wlp3s0: authenticated
[119695.527045] wlp3s0: associate with 78:a3:51:0c:ba:14 (try 1/3)
[119695.529122] wlp3s0: RX AssocResp from 78:a3:51:0c:ba:14 (capab=0xc31 status=0 aid=2)
[119695.533648] wlp3s0: associated
[119695.533703] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[120382.778493] ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[120382.778884] usb 2-1: USB disconnect, device number 9
[120382.806939] ipheth 2-1:4.2: Apple iPhone USB Ethernet now disconnected
[120852.480976] usb 2-1: new high-speed USB device number 10 using xhci_hcd
[120852.622556] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[120852.622561] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[120852.622565] usb 2-1: Product: iPhone
[120852.622568] usb 2-1: Manufacturer: Apple Inc.
[120852.622570] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[122101.711982] usb 2-1: USB disconnect, device number 10
[122286.585278] usb 2-1: new high-speed USB device number 11 using xhci_hcd
[122286.726682] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[122286.726687] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[122286.726690] usb 2-1: Product: iPhone
[122286.726692] usb 2-1: Manufacturer: Apple Inc.
[122286.726694] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[123500.359205] thinkpad_acpi: EC reports that Thermal Table has changed
[125924.846127] usb 2-1: USB disconnect, device number 11
[127013.423651] usb 2-1: new high-speed USB device number 12 using xhci_hcd
[127013.564834] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[127013.564840] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[127013.564844] usb 2-1: Product: iPhone
[127013.564847] usb 2-1: Manufacturer: Apple Inc.
[127013.564850] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[127476.676462] usb 2-1: USB disconnect, device number 12
[127943.061348] usb 2-1: new high-speed USB device number 13 using xhci_hcd
[127943.203043] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[127943.203046] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[127943.203048] usb 2-1: Product: iPhone
[127943.203049] usb 2-1: Manufacturer: Apple Inc.
[127943.203050] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[128857.390267] usb 2-1: USB disconnect, device number 13
[128859.522931] wlp3s0: deauthenticating from 78:a3:51:0c:ba:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[128864.678577] PM: Syncing filesystems ... done.
[128865.160141] PM: Preparing system for sleep (mem)
[128865.160602] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[128865.160632] Freezing user space processes ... (elapsed 0.002 seconds) done.
[128865.162969] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[128865.163814] PM: Suspending system (mem)
[128865.163842] Suspending console(s) (use no_console_suspend to debug)
[128865.168208] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[128865.363604] e1000e: EEE TX LPI TIMER: 00000011
[128865.381069] sd 0:0:0:0: [sda] Stopping disk
[128866.579307] PM: suspend of devices complete after 1415.205 msecs
[128866.595938] PM: late suspend of devices complete after 16.626 msecs
[128866.597798] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[128866.597918] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[128866.597985] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[128866.647869] PM: noirq suspend of devices complete after 51.924 msecs
[128866.648217] ACPI: Preparing to enter system sleep state S3
[128866.935910] ACPI : EC: event blocked
[128866.935911] ACPI : EC: EC stopped
[128866.935911] PM: Saving platform NVS memory
[128866.935926] Disabling non-boot CPUs ...
[128866.980177] Broke affinity for irq 42
[128866.980179] Broke affinity for irq 43
[128866.981536] smpboot: CPU 1 is now offline
[128867.004137] Broke affinity for irq 42
[128867.004139] Broke affinity for irq 43
[128867.004141] Broke affinity for irq 46
[128867.005162] smpboot: CPU 2 is now offline
[128867.032048] Broke affinity for irq 1
[128867.032056] Broke affinity for irq 9
[128867.032060] Broke affinity for irq 12
[128867.032069] Broke affinity for irq 23
[128867.032072] Broke affinity for irq 42
[128867.032073] Broke affinity for irq 43
[128867.032074] Broke affinity for irq 44
[128867.032076] Broke affinity for irq 46
[128867.033089] smpboot: CPU 3 is now offline
[128867.034609] ACPI: Low-level resume complete
[128867.034669] ACPI : EC: EC started
[128867.034669] PM: Restoring platform NVS memory
[128867.034999] Suspended for 33008.052 seconds
[128867.035050] Enabling non-boot CPUs ...
[128867.035110] x86: Booting SMP configuration:
[128867.035110] smpboot: Booting Node 0 Processor 1 APIC 0x1
[128867.037671]  cache: parent cpu1 should not be sleeping
[128867.038013] CPU1 is up
[128867.038071] smpboot: Booting Node 0 Processor 2 APIC 0x2
[128867.040480]  cache: parent cpu2 should not be sleeping
[128867.040861] CPU2 is up
[128867.040906] smpboot: Booting Node 0 Processor 3 APIC 0x3
[128867.043464]  cache: parent cpu3 should not be sleeping
[128867.043932] CPU3 is up
[128867.047177] ACPI: Waking up from system sleep state S3
[128867.701407] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[128867.701445] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[128867.701509] PM: noirq resume of devices complete after 52.084 msecs
[128867.701839] PM: early resume of devices complete after 0.309 msecs
[128867.701913] usb usb2: root hub lost power or was reset
[128867.701916] usb usb3: root hub lost power or was reset
[128867.702131] ACPI : EC: event unblocked
[128867.704734] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[128867.704829] rtc_cmos 00:02: System wakeup disabled by ACPI
[128867.708097] sd 0:0:0:0: [sda] Starting disk
[128867.941415] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[128868.093606] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[128868.125883] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[128868.159540] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[128868.353490] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[128868.613536] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[128868.756308] PM: resume of devices complete after 1054.368 msecs
[128868.756415] usb 2-7:1.0: rebind failed: -517
[128868.756417] usb 2-7:1.1: rebind failed: -517
[128868.756605] PM: Finishing wakeup.
[128868.756606] Restarting tasks ... done.
[128868.793013] Bluetooth: hci0: read Intel version: 370710018002030d00
[128868.793120] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[128868.793123] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[128868.918025] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[128869.401596] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[128869.402755] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[128869.402758] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[128869.405059] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[128869.405062] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[128869.406215] ata1.00: configured for UDMA/133
[128869.543067] e1000e: enp0s25 NIC Link is Down
[128869.543958] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[128869.729939] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[128869.732715] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128869.735198] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[128869.735724] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[128869.946059] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[128869.946685] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[128869.972301] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128870.051496] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128871.102097] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[128871.109896] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[128871.114723] wlp3s0: authenticated
[128871.121811] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[128871.127287] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=2)
[128871.134240] wlp3s0: associated
[128871.134321] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[128871.325256] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[128871.325261] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[128871.325293] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[128872.757784] usb 2-1: new full-speed USB device number 14 using xhci_hcd
[128872.899877] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[128872.899886] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[128872.899891] usb 2-1: Product: USB Device
[128872.899895] usb 2-1: Manufacturer: A4TECH
[128872.902885] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0009/input/input27
[128872.962503] hid-generic 0003:09DA:054F.0009: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[128872.964473] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.000A/input/input28
[128872.964699] hid-generic 0003:09DA:054F.000A: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[128882.281075] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[137497.539141] usb 2-1: USB disconnect, device number 14
[145061.962688] Thread (pooled)[15374]: segfault at 8 ip 00007f13e70c129e sp 00007f13c5d649a0 error 4 in libQt5Core.so.5.6.1[7f13e6e0f000+4c6000]
[145129.742280] usb 2-2: new full-speed USB device number 15 using xhci_hcd
[145129.883839] usb 2-2: New USB device found, idVendor=09da, idProduct=054f
[145129.883845] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[145129.883848] usb 2-2: Product: USB Device
[145129.883850] usb 2-2: Manufacturer: A4TECH
[145129.887073] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:09DA:054F.000B/input/input29
[145129.946884] hid-generic 0003:09DA:054F.000B: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-2/input0
[145129.948204] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:09DA:054F.000C/input/input30
[145129.948441] hid-generic 0003:09DA:054F.000C: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-2/input1
[158787.248500] Qt bearer threa[28877]: segfault at 7fbee0028e54 ip 00007fbee0028e54 sp 00007fbed96a4780 error 14
[164642.882788] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=2146405 end=2146404) time -2386 us, min 763, max 767, scanline start 788, end 674
[164787.891555] thinkpad_acpi: EC reports that Thermal Table has changed
[164788.359444] usb 2-2: USB disconnect, device number 15
[164792.064018] PM: Syncing filesystems ... done.
[164792.829588] PM: Preparing system for sleep (mem)
[164792.829849] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[164792.830024] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[164792.830047] Freezing user space processes ... (elapsed 0.085 seconds) done.
[164792.915782] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[164792.917041] PM: Suspending system (mem)
[164792.917068] Suspending console(s) (use no_console_suspend to debug)
[164792.921567] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[164792.921789] sd 0:0:0:0: [sda] Stopping disk
[164793.102579] e1000e: EEE TX LPI TIMER: 00000011
[164794.330417] PM: suspend of devices complete after 1413.087 msecs
[164794.347083] PM: late suspend of devices complete after 16.659 msecs
[164794.348954] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[164794.349089] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[164794.349152] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[164794.398991] PM: noirq suspend of devices complete after 51.900 msecs
[164794.399338] ACPI: Preparing to enter system sleep state S3
[164794.687030] ACPI : EC: event blocked
[164794.687030] ACPI : EC: EC stopped
[164794.687031] PM: Saving platform NVS memory
[164794.687047] Disabling non-boot CPUs ...
[164794.711304] Broke affinity for irq 42
[164794.711306] Broke affinity for irq 43
[164794.712683] smpboot: CPU 1 is now offline
[164794.731258] Broke affinity for irq 42
[164794.731260] Broke affinity for irq 43
[164794.732276] smpboot: CPU 2 is now offline
[164794.755167] Broke affinity for irq 1
[164794.755175] Broke affinity for irq 9
[164794.755180] Broke affinity for irq 12
[164794.755188] Broke affinity for irq 23
[164794.755191] Broke affinity for irq 42
[164794.755193] Broke affinity for irq 43
[164794.755194] Broke affinity for irq 44
[164794.755195] Broke affinity for irq 46
[164794.756209] smpboot: CPU 3 is now offline
[164794.757756] ACPI: Low-level resume complete
[164794.757816] ACPI : EC: EC started
[164794.757817] PM: Restoring platform NVS memory
[164794.758149] Suspended for 52419.871 seconds
[164794.758206] Enabling non-boot CPUs ...
[164794.758266] x86: Booting SMP configuration:
[164794.758267] smpboot: Booting Node 0 Processor 1 APIC 0x1
[164794.760829]  cache: parent cpu1 should not be sleeping
[164794.761171] CPU1 is up
[164794.761230] smpboot: Booting Node 0 Processor 2 APIC 0x2
[164794.763637]  cache: parent cpu2 should not be sleeping
[164794.764023] CPU2 is up
[164794.764068] smpboot: Booting Node 0 Processor 3 APIC 0x3
[164794.766601]  cache: parent cpu3 should not be sleeping
[164794.767079] CPU3 is up
[164794.770321] ACPI: Waking up from system sleep state S3
[164795.120631] thinkpad_acpi: EC reports that Thermal Table has changed
[164795.476478] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[164795.476519] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[164795.476580] PM: noirq resume of devices complete after 52.083 msecs
[164795.476934] PM: early resume of devices complete after 0.334 msecs
[164795.477008] usb usb2: root hub lost power or was reset
[164795.477011] usb usb3: root hub lost power or was reset
[164795.477099] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[164795.481762] sd 0:0:0:0: [sda] Starting disk
[164795.492471] ACPI : EC: event unblocked
[164795.525343] rtc_cmos 00:02: System wakeup disabled by ACPI
[164795.716494] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[164795.868525] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[164795.947277] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[164795.980972] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[164796.128550] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[164796.388631] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[164796.586637] PM: resume of devices complete after 1109.622 msecs
[164796.586742] usb 2-7:1.0: rebind failed: -517
[164796.586744] usb 2-7:1.1: rebind failed: -517
[164796.586902] PM: Finishing wakeup.
[164796.586903] Restarting tasks ... done.
[164796.620078] Bluetooth: hci0: read Intel version: 370710018002030d00
[164796.620083] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[164796.744073] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[164797.112570] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[164797.113643] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[164797.113646] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[164797.115823] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[164797.115826] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[164797.116824] ata1.00: configured for UDMA/133
[164797.432181] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[164797.432184] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[164797.790409] e1000e: enp0s25 NIC Link is Down
[164797.817254] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[164798.012892] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[164798.013759] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[164798.016535] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[164798.017385] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[164798.219064] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[164798.219582] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[164798.240317] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[164798.357965] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[164799.038541] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[164799.548729] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[164799.548734] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[164799.548765] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[164800.564891] usb 2-1: new full-speed USB device number 16 using xhci_hcd
[164800.706415] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[164800.706418] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[164800.706420] usb 2-1: Product: USB Device
[164800.706421] usb 2-1: Manufacturer: A4TECH
[164800.708607] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.000D/input/input31
[164800.765216] hid-generic 0003:09DA:054F.000D: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[164800.766772] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.000E/input/input32
[164800.766912] hid-generic 0003:09DA:054F.000E: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[166023.006483] thinkpad_acpi: EC reports that Thermal Table has changed
[166023.505517] e1000e: enp0s25 NIC Link is Down
[166024.839718] usb 2-1: USB disconnect, device number 16
[166079.296446] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[166079.296454] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[168480.250374] e1000e: enp0s25 NIC Link is Down
[168510.474688] thinkpad_acpi: EC reports that Thermal Table has changed
[168512.677969] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[168512.677977] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[168517.002539] usb 2-1: new full-speed USB device number 17 using xhci_hcd
[168517.144660] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[168517.144665] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[168517.144667] usb 2-1: Product: USB Device
[168517.144670] usb 2-1: Manufacturer: A4TECH
[168517.148574] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.000F/input/input33
[168517.207774] hid-generic 0003:09DA:054F.000F: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[168517.209324] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0010/input/input34
[168517.209633] hid-generic 0003:09DA:054F.0010: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[184224.079299] Thread (pooled)[7606]: segfault at 8 ip 00007fbcdc17d29e sp 00007fbcbadf69a0 error 4 in libQt5Core.so.5.6.1[7fbcdbecb000+4c6000]
[198930.313176] thinkpad_acpi: EC reports that Thermal Table has changed
[203466.024231] usb 2-1: USB disconnect, device number 17
[203468.027917] e1000e: enp0s25 NIC Link is Down
[203470.689991] PM: Syncing filesystems ... done.
[203471.797893] PM: Preparing system for sleep (mem)
[203471.905172] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[203471.905198] Freezing user space processes ... (elapsed 0.016 seconds) done.
[203471.922075] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[203471.923407] PM: Suspending system (mem)
[203471.923435] Suspending console(s) (use no_console_suspend to debug)
[203471.923787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[203472.126873] e1000e: EEE TX LPI TIMER: 00000011
[203472.153898] sd 0:0:0:0: [sda] Stopping disk
[203473.360209] PM: suspend of devices complete after 1436.513 msecs
[203473.380116] PM: late suspend of devices complete after 19.901 msecs
[203473.383074] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[203473.383091] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[203473.383094] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[203473.432079] PM: noirq suspend of devices complete after 51.956 msecs
[203473.432448] ACPI: Preparing to enter system sleep state S3
[203473.720117] ACPI : EC: event blocked
[203473.720117] ACPI : EC: EC stopped
[203473.720118] PM: Saving platform NVS memory
[203473.720134] Disabling non-boot CPUs ...
[203473.760391] Broke affinity for irq 42
[203473.760394] Broke affinity for irq 46
[203473.761422] smpboot: CPU 1 is now offline
[203473.792368] Broke affinity for irq 42
[203473.792371] Broke affinity for irq 44
[203473.792373] Broke affinity for irq 46
[203473.793771] smpboot: CPU 2 is now offline
[203473.816258] Broke affinity for irq 1
[203473.816267] Broke affinity for irq 9
[203473.816271] Broke affinity for irq 12
[203473.816280] Broke affinity for irq 23
[203473.816283] Broke affinity for irq 42
[203473.816284] Broke affinity for irq 43
[203473.816286] Broke affinity for irq 44
[203473.816287] Broke affinity for irq 46
[203473.817309] smpboot: CPU 3 is now offline
[203473.819081] ACPI: Low-level resume complete
[203473.819141] ACPI : EC: EC started
[203473.819142] PM: Restoring platform NVS memory
[203473.819474] Suspended for 5476.455 seconds
[203473.819528] Enabling non-boot CPUs ...
[203473.819588] x86: Booting SMP configuration:
[203473.819588] smpboot: Booting Node 0 Processor 1 APIC 0x1
[203473.822153]  cache: parent cpu1 should not be sleeping
[203473.822495] CPU1 is up
[203473.822553] smpboot: Booting Node 0 Processor 2 APIC 0x2
[203473.824960]  cache: parent cpu2 should not be sleeping
[203473.825340] CPU2 is up
[203473.825386] smpboot: Booting Node 0 Processor 3 APIC 0x3
[203473.827901]  cache: parent cpu3 should not be sleeping
[203473.828397] CPU3 is up
[203473.831638] ACPI: Waking up from system sleep state S3
[203474.505726] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[203474.505769] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[203474.505827] PM: noirq resume of devices complete after 52.083 msecs
[203474.506197] PM: early resume of devices complete after 0.351 msecs
[203474.506292] usb usb2: root hub lost power or was reset
[203474.506295] usb usb3: root hub lost power or was reset
[203474.506402] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[203474.506514] ACPI : EC: event unblocked
[203474.507377] rtc_cmos 00:02: System wakeup disabled by ACPI
[203474.510476] sd 0:0:0:0: [sda] Starting disk
[203474.745761] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[203474.897773] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[203474.915075] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[203474.947874] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[203475.157815] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[203475.417850] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[203475.559329] PM: resume of devices complete after 1053.051 msecs
[203475.559421] usb 2-7:1.0: rebind failed: -517
[203475.559424] usb 2-7:1.1: rebind failed: -517
[203475.559585] PM: Finishing wakeup.
[203475.559586] Restarting tasks ... done.
[203475.583390] Bluetooth: hci0: read Intel version: 370710018002030d00
[203476.197861] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[203476.198929] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[203476.198932] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[203476.201082] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[203476.201085] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[203476.202091] ata1.00: configured for UDMA/133
[203476.363822] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[203476.363828] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[203476.493483] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[203477.635544] e1000e: enp0s25 NIC Link is Down
[203477.636550] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[203477.822200] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[203477.825041] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[203477.827456] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[203477.827980] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[203478.052012] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[203478.052696] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[203478.075042] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[203478.250561] thinkpad_acpi: EC reports that Thermal Table has changed
[203478.585066] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[203479.393087] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[203479.397973] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[203479.399885] wlp3s0: authenticated
[203479.402211] wlp3s0: associate with 78:a3:51:0c:ba:14 (try 1/3)
[203479.404759] wlp3s0: RX AssocResp from 78:a3:51:0c:ba:14 (capab=0xc31 status=0 aid=1)
[203479.406668] wlp3s0: associated
[203479.406730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[203479.552766] wlp3s0: deauthenticating from 78:a3:51:0c:ba:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[203484.428912] wlp3s0: authenticate with 78:a3:51:0c:ba:14
[203484.433672] wlp3s0: send auth to 78:a3:51:0c:ba:14 (try 1/3)
[203484.436302] wlp3s0: authenticated
[203484.438529] wlp3s0: associate with 78:a3:51:0c:ba:14 (try 1/3)
[203484.441186] wlp3s0: RX AssocResp from 78:a3:51:0c:ba:14 (capab=0xc31 status=0 aid=1)
[203484.443525] wlp3s0: associated
[206293.144651] usb 2-1: new high-speed USB device number 18 using xhci_hcd
[206293.285837] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8
[206293.285843] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[206293.285846] usb 2-1: Product: iPhone
[206293.285849] usb 2-1: Manufacturer: Apple Inc.
[206293.285851] usb 2-1: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[214961.627470] wlp3s0: deauthenticating from 78:a3:51:0c:ba:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[214966.986581] PM: Syncing filesystems ... done.
[214967.837340] PM: Preparing system for sleep (mem)
[214967.895592] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[214967.904120] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[214967.904135] Freezing user space processes ... (elapsed 0.002 seconds) done.
[214967.906613] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[214967.907879] PM: Suspending system (mem)
[214967.907906] Suspending console(s) (use no_console_suspend to debug)
[214967.908313] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[214968.101057] e1000e: EEE TX LPI TIMER: 00000011
[214968.144396] sd 0:0:0:0: [sda] Stopping disk
[214969.249678] PM: suspend of devices complete after 1341.503 msecs
[214969.266352] PM: late suspend of devices complete after 16.669 msecs
[214969.268744] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[214969.268826] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[214969.268913] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[214969.318323] PM: noirq suspend of devices complete after 51.963 msecs
[214969.318671] ACPI: Preparing to enter system sleep state S3
[214969.606363] ACPI : EC: event blocked
[214969.606363] ACPI : EC: EC stopped
[214969.606364] PM: Saving platform NVS memory
[214969.606379] Disabling non-boot CPUs ...
[214969.630621] Broke affinity for irq 42
[214969.631997] smpboot: CPU 1 is now offline
[214969.666582] Broke affinity for irq 42
[214969.666584] Broke affinity for irq 44
[214969.666586] Broke affinity for irq 46
[214969.667609] smpboot: CPU 2 is now offline
[214969.686504] Broke affinity for irq 1
[214969.686512] Broke affinity for irq 9
[214969.686516] Broke affinity for irq 12
[214969.686525] Broke affinity for irq 23
[214969.686528] Broke affinity for irq 42
[214969.686529] Broke affinity for irq 43
[214969.686531] Broke affinity for irq 44
[214969.686532] Broke affinity for irq 46
[214969.687544] smpboot: CPU 3 is now offline
[214969.689083] ACPI: Low-level resume complete
[214969.689144] ACPI : EC: EC started
[214969.689144] PM: Restoring platform NVS memory
[214969.689474] Suspended for 30126.499 seconds
[214969.689520] Enabling non-boot CPUs ...
[214969.689580] x86: Booting SMP configuration:
[214969.689581] smpboot: Booting Node 0 Processor 1 APIC 0x1
[214969.692143]  cache: parent cpu1 should not be sleeping
[214969.692479] CPU1 is up
[214969.692537] smpboot: Booting Node 0 Processor 2 APIC 0x2
[214969.694946]  cache: parent cpu2 should not be sleeping
[214969.695327] CPU2 is up
[214969.695374] smpboot: Booting Node 0 Processor 3 APIC 0x3
[214969.697911]  cache: parent cpu3 should not be sleeping
[214969.698402] CPU3 is up
[214969.701744] ACPI: Waking up from system sleep state S3
[214970.060027] thinkpad_acpi: EC reports that Thermal Table has changed
[214970.415887] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[214970.415930] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[214970.415987] PM: noirq resume of devices complete after 52.083 msecs
[214970.416334] PM: early resume of devices complete after 0.327 msecs
[214970.416434] usb usb2: root hub lost power or was reset
[214970.416436] usb usb3: root hub lost power or was reset
[214970.416576] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[214970.420704] sd 0:0:0:0: [sda] Starting disk
[214970.431880] ACPI : EC: event unblocked
[214970.464316] rtc_cmos 00:02: System wakeup disabled by ACPI
[214970.655924] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[214970.808002] usb 2-6: reset full-speed USB device number 3 using xhci_hcd
[214970.880734] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[214970.914718] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[214971.067981] usb 2-8: reset high-speed USB device number 5 using xhci_hcd
[214971.328020] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[214972.048045] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[214972.049152] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[214972.049154] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[214972.051434] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[214972.051437] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[214972.052462] ata1.00: configured for UDMA/133
[214972.335524] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[214972.335526] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[214972.335552] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[214973.497299] PM: resume of devices complete after 3080.687 msecs
[214973.497430] usb 2-7:1.0: rebind failed: -517
[214973.497432] usb 2-7:1.1: rebind failed: -517
[214973.497614] PM: Finishing wakeup.
[214973.497615] Restarting tasks ... 
[214973.497700] usb 2-1: USB disconnect, device number 18
[214973.512283] done.
[214973.527695] Bluetooth: hci0: read Intel version: 370710018002030d00
[214973.527701] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[214973.656702] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[214973.983191] e1000e: enp0s25 NIC Link is Down
[214973.986039] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[214974.180520] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[214974.183508] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[214974.185969] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[214974.186494] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[214974.387542] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[214974.388168] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[214974.412871] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[214974.553585] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[214975.600827] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[214975.605236] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[214975.609147] wlp3s0: authenticated
[214975.612442] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[214975.627240] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=5)
[214975.629964] wlp3s0: associated
[214975.630065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[214975.714703] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[214975.714708] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[214975.714743] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[214980.316767] usb 2-1: new full-speed USB device number 19 using xhci_hcd
[214980.458304] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[214980.458307] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[214980.458309] usb 2-1: Product: USB Device
[214980.458310] usb 2-1: Manufacturer: A4TECH
[214980.460681] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0011/input/input35
[214980.517667] hid-generic 0003:09DA:054F.0011: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[214980.519200] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0012/input/input36
[214980.519523] hid-generic 0003:09DA:054F.0012: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[215177.515161] thinkpad_acpi: EC reports that Thermal Table has changed
[215477.538889] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[215963.371272] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[215963.847945] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[215963.852165] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[215963.862696] wlp3s0: authenticated
[215963.866738] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[215963.881888] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=1)
[215963.883295] wlp3s0: associated
[215963.883363] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[216017.840657] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[216965.382564] thinkpad_acpi: EC reports that Thermal Table has changed
[216967.562055] e1000e: enp0s25 NIC Link is Down
[216968.831698] usb 2-1: USB disconnect, device number 19
[217026.058974] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[217026.058981] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[218803.880036] Thread (pooled)[27948]: segfault at 8 ip 00007f9cfb57529e sp 00007f9cda3b99a0 error 4 in libQt5Core.so.5.6.1[7f9cfb2c3000+4c6000]
[223809.363729] e1000e: enp0s25 NIC Link is Down
[225642.513176] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[225642.513182] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[225731.251225] e1000e: enp0s25 NIC Link is Down
[225763.273351] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[225763.273357] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[225778.522350] e1000e: enp0s25 NIC Link is Down
[225780.342273] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[225780.342280] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[226428.821224] e1000e: enp0s25 NIC Link is Down
[226477.381193] thinkpad_acpi: EC reports that Thermal Table has changed
[226479.616361] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[226479.616366] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[226479.832356] usb 2-1: new full-speed USB device number 20 using xhci_hcd
[226479.974074] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[226479.974079] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[226479.974082] usb 2-1: Product: USB Device
[226479.974085] usb 2-1: Manufacturer: A4TECH
[226479.977202] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0013/input/input37
[226480.037173] hid-generic 0003:09DA:054F.0013: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[226480.040727] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0014/input/input38
[226480.041163] hid-generic 0003:09DA:054F.0014: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[227822.022059] perf: interrupt took too long (6299 > 6237), lowering kernel.perf_event_max_sample_rate to 31750
