[    0.000000] Linux version 4.9.0-deepin12-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP PREEMPT Deepin 4.9.40-3 (2017-09-19) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin12-amd64 root=UUID=b99205f2-dd82-477a-bce2-0639e823a7d4 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce22ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce230000-0x00000000dcd3efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20AMA37DCD/20AMA37DCD, BIOS GIET74WW (2.24 ) 05/13/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 00DCF00000 mask 7FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xce230 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9727c00f0100]
[    0.000000] Base memory trampoline at [ffff9727c0097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0c724000, 0x0c724fff] PGTABLE
[    0.000000] BRK [0x0c725000, 0x0c725fff] PGTABLE
[    0.000000] BRK [0x0c726000, 0x0c726fff] PGTABLE
[    0.000000] BRK [0x0c727000, 0x0c727fff] PGTABLE
[    0.000000] BRK [0x0c728000, 0x0c728fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32c12000-0x35600fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DCEFE170 0000DC (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000DCEE2000 010B03 (v01 LENOVO TP-GI    00002240 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DCE4A000 000040
[    0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GI    00002240 PTEC 00000001)
[    0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDF000 0007F5 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDE000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDC000 00125C (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 0x00000000DCEDA000 00006E (v05 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 0x00000000DCED8000 000042 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: POAT 0x00000000DCE42000 000055 (v03 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: BATB 0x00000000DCED7000 000046 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000DCED6000 000064 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCED5000 0002F6 (v01 LENOVO TP-GI    00002240 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21e5f9000-0x21e5fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ce22ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[    0.000000] On node 0 totalpages: 2017228
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13129 pages used for memmap
[    0.000000]   DMA32 zone: 840240 pages, LIFO batch:31
[    0.000000]   Normal zone: 18328 pages used for memmap
[    0.000000]   Normal zone: 1172992 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dda00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xce230000-0xdcd3efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9729de200000 s103896 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s103896 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1985686
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin12-amd64 root=UUID=b99205f2-dd82-477a-bce2-0639e823a7d4 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7816196K/8068912K available (6264K kernel code, 1142K rwdata, 2864K rodata, 1348K init, 688K bss, 252716K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.573 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.14 BogoMIPS (lpj=9578292)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000060] ACPI: Core revision 20160831
[    0.020687] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.020760] Security Framework initialized
[    0.020761] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020768] AppArmor: AppArmor disabled by boot time parameter
[    0.021401] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023738] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024672] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024684] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.025040] CPU: Physical Processor ID: 0
[    0.025041] CPU: Processor Core ID: 0
[    0.025046] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.025047] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.025052] mce: CPU supports 7 MCE banks
[    0.025062] CPU0: Thermal monitoring enabled (TM1)
[    0.025078] process: using mwait in idle threads
[    0.025082] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.025083] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.025513] Freeing SMP alternatives memory: 24K (ffffffffa5670000 - ffffffffa5676000)
[    0.027402] ftrace: allocating 25166 entries in 99 pages
[    0.040699] smpboot: Max logical packages: 4
[    0.041315] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081006] TSC deadline timer enabled
[    0.081008] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.081014] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.081064] ... version:                3
[    0.081065] ... bit width:              48
[    0.081065] ... generic registers:      4
[    0.081066] ... value mask:             0000ffffffffffff
[    0.081067] ... max period:             00007fffffffffff
[    0.081068] ... fixed-purpose events:   3
[    0.081069] ... event mask:             000000070000000f
[    0.121316] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.161232] x86: Booting SMP configuration:
[    0.161233] .... node  #0, CPUs:      #1 #2 #3
[    0.228068] x86: Booted up 1 node, 4 CPUs
[    0.228071] smpboot: Total of 4 processors activated (19156.58 BogoMIPS)
[    0.233045] devtmpfs: initialized
[    0.233134] x86/mm: Memory block size: 128MB
[    0.236459] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
[    0.236575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.236593] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.236669] pinctrl core: initialized pinctrl subsystem
[    0.236820] NET: Registered protocol family 16
[    0.252695] cpuidle: using governor ladder
[    0.268704] cpuidle: using governor menu
[    0.268736] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.268737] ACPI: bus type PCI registered
[    0.268739] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.268937] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.268940] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.268946] PCI: Using configuration type 1 for base access
[    0.268995] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.280869] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.280870] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.281188] ACPI: Added _OSI(Module Device)
[    0.281190] ACPI: Added _OSI(Processor Device)
[    0.281191] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.281192] ACPI: Added _OSI(Processor Aggregator Device)
[    0.281200] ACPI : EC: EC started
[    0.281201] ACPI : EC: interrupt blocked
[    0.282483] ACPI: \: Used as first EC
[    0.282485] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.282487] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.288464] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.294377] ACPI: Dynamic OEM Table Load:
[    0.294390] ACPI: SSDT 0xFFFF9729D49D9800 000436 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.294877] ACPI: Dynamic OEM Table Load:
[    0.294890] ACPI: SSDT 0xFFFF9729D4A28800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.295466] ACPI: Dynamic OEM Table Load:
[    0.295476] ACPI: SSDT 0xFFFF9729D49DC600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.296824] ACPI : EC: EC stopped
[    0.296825] ACPI : EC: EC started
[    0.296826] ACPI : EC: interrupt blocked
[    0.297047] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[    0.297049] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.297051] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[    0.297052] ACPI: Interpreter enabled
[    0.297086] ACPI: (supports S0 S3 S4 S5)
[    0.297087] ACPI: Using IOAPIC for interrupt routing
[    0.297120] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.301457] ACPI: Power Resource [PUBS] (on)
[    0.302768] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.307997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.308108] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[    0.308215] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.308322] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[    0.308427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.308509] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.308616] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.308722] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[    0.308848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.308853] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.309016] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.309087] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.309089] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.309091] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.309093] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.309317] PCI host bridge to bus 0000:00
[    0.309320] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.309322] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.309323] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.309327] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.309329] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.309338] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.309451] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.309465] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.309473] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.309479] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.309586] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.309597] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    0.309729] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.309746] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    0.309809] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.309852] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.309901] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.309921] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
[    0.309994] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.310083] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[    0.310098] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    0.310107] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
[    0.310115] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.310175] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.310218] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.310269] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.310285] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    0.310356] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.310443] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[    0.310512] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.310660] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[    0.310735] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.310831] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.310889] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.310907] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    0.310998] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.311043] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.311093] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.311285] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.311299] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.311306] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    0.311314] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.311321] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    0.311328] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.311336] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    0.311373] pci 0000:00:1f.2: PME# supported from D3hot
[    0.311456] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.311471] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    0.311492] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.311660] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.311688] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.311835] pci 0000:02:00.0: supports D1 D2
[    0.311836] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.320780] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.320785] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.321016] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    0.321103] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.321501] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.332924] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.332929] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.334443] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.334551] ACPI : EC: interrupt unblocked
[    0.334558] ACPI : EC: event unblocked
[    0.334566] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.334568] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.334798] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.334799] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.334802] vgaarb: loaded
[    0.334803] vgaarb: bridge control possible 0000:00:02.0
[    0.334882] PCI: Using ACPI for IRQ routing
[    0.336338] PCI: pci_cache_line_size set to 64 bytes
[    0.336687] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.336689] e820: reserve RAM buffer [mem 0xce230000-0xcfffffff]
[    0.336690] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.336892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.336900] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.338921] clocksource: Switched to clocksource hpet
[    0.347765] VFS: Disk quotas dquot_6.6.0
[    0.347796] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.347910] pnp: PnP ACPI init
[    0.348479] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.348481] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.348483] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.348484] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.348486] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.348488] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.348490] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.348491] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.348493] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.348495] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.348497] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.348499] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.348501] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.348503] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.348504] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.348506] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.348511] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.348672] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.348702] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.348705] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.348706] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.348708] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.348710] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.348712] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.348713] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.348716] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.348718] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.348720] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.348721] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.348723] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.348726] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.348728] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.348730] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.348732] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.348733] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.348735] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.348737] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.348739] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.348742] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348818] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.348848] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.348878] pnp 00:04: Plug and Play ACPI device, IDs LEN0035 PNP0f13 (active)
[    0.349510] pnp: PnP ACPI: found 5 devices
[    0.356155] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.356178] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.356184] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.356191] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.356196] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.356205] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.356207] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.356208] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.356210] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.356211] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.356213] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.356358] NET: Registered protocol family 2
[    0.356604] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.356763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.356927] TCP: Hash tables configured (established 65536 bind 65536)
[    0.356955] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.356987] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.357069] NET: Registered protocol family 1
[    0.357086] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.357641] PCI: CLS 64 bytes, default 64
[    0.357703] Unpacking initramfs...
[    1.297121] Freeing initrd memory: 42940K (ffff9727f2c12000 - ffff9727f5601000)
[    1.297125] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.297128] software IO TLB [mem 0xca230000-0xce230000] (64MB) mapped at [ffff97288a230000-ffff97288e22ffff]
[    1.297629] audit: initializing netlink subsys (disabled)
[    1.297650] audit: type=2000 audit(1509284823.284:1): initialized
[    1.298168] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.298211] zbud: loaded
[    1.299042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.299082] io scheduler noop registered
[    1.299083] io scheduler deadline registered
[    1.299097] io scheduler cfq registered (default)
[    1.299458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.299464] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.299482] intel_idle: MWAIT substates: 0x11142120
[    1.299484] intel_idle: v0.4.1 model 0x45
[    1.299779] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.300026] GHES: HEST is not enabled!
[    1.300101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.300585] Linux agpgart interface v0.103
[    1.300675] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.300676] AMD IOMMUv2 functionality not available on this system
[    1.301111] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.303770] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.303784] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.303923] mousedev: PS/2 mouse device common for all mice
[    1.303976] rtc_cmos 00:02: RTC can wake from S4
[    1.304144] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.304173] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.304227] ledtrig-cpu: registered to indicate activity on CPUs
[    1.304843] NET: Registered protocol family 10
[    1.305148] mip6: Mobile IPv6
[    1.305151] NET: Registered protocol family 17
[    1.305154] mpls_gso: MPLS GSO support
[    1.305470] microcode: sig=0x40651, pf=0x40, revision=0x17
[    1.305544] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.305705] registered taskstats version 1
[    1.305723] zswap: loaded using pool lzo/zbud
[    1.305833] ima: No TPM chip found, activating TPM-bypass!
[    1.305995] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.306364] rtc_cmos 00:02: setting system clock to 2017-10-29 13:47:04 UTC (1509284824)
[    1.306435] PM: Hibernation image not present or could not be loaded.
[    1.307776] Freeing unused kernel memory: 1348K (ffffffffa551f000 - ffffffffa5670000)
[    1.307777] Write protecting the kernel read-only data: 12288k
[    1.308381] Freeing unused kernel memory: 1912K (ffff9727cbe22000 - ffff9727cc000000)
[    1.312318] Freeing unused kernel memory: 1232K (ffff9727cc2cc000 - ffff9727cc400000)
[    1.319246] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.361750] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.361940] ACPI: Lid Switch [LID]
[    1.362042] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    1.362047] ACPI: Sleep Button [SLPB]
[    1.362183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.362186] ACPI: Power Button [PWRF]
[    1.370882] wmi: Mapper loaded
[    1.372894] [drm] Initialized
[    1.376514] pps_core: LinuxPPS API ver. 1 registered
[    1.376516] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.377394] PTP clock support registered
[    1.379440] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.379441] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.379681] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.380121] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[    1.380854] ACPI: bus type USB registered
[    1.380898] usbcore: registered new interface driver usbfs
[    1.380917] usbcore: registered new interface driver hub
[    1.381078] SCSI subsystem initialized
[    1.381246] usbcore: registered new device driver usb
[    1.381537] thermal LNXTHERM:00: registered as thermal_zone0
[    1.381540] ACPI: Thermal Zone [THM0] (57 C)
[    1.382098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.382576] ehci-pci: EHCI PCI platform driver
[    1.391110] libata version 3.00 loaded.
[    1.715566] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.784424] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:9b:7e:9d
[    1.784433] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.784461] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    1.784700] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.784708] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.784724] ehci-pci 0000:00:1d.0: debug port 2
[    1.785448] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.788645] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.788662] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
[    1.802927] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.803012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.803014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.803016] usb usb1: Product: EHCI Host Controller
[    1.803017] usb usb1: Manufacturer: Linux 4.9.0-deepin12-amd64 ehci_hcd
[    1.803019] usb usb1: SerialNumber: 0000:00:1d.0
[    1.803348] hub 1-0:1.0: USB hub found
[    1.803362] hub 1-0:1.0: 3 ports detected
[    1.803811] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.803845] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.805267] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.805279] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.806363] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.806370] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.806547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.806550] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.806551] usb usb2: Product: xHCI Host Controller
[    1.806553] usb usb2: Manufacturer: Linux 4.9.0-deepin12-amd64 xhci-hcd
[    1.806554] usb usb2: SerialNumber: 0000:00:14.0
[    1.806737] hub 2-0:1.0: USB hub found
[    1.806759] hub 2-0:1.0: 9 ports detected
[    1.808932] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.808937] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.808980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.808982] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.808984] usb usb3: Product: xHCI Host Controller
[    1.808985] usb usb3: Manufacturer: Linux 4.9.0-deepin12-amd64 xhci-hcd
[    1.808986] usb usb3: SerialNumber: 0000:00:14.0
[    1.809249] hub 3-0:1.0: USB hub found
[    1.809260] hub 3-0:1.0: 4 ports detected
[    1.810188] ahci 0000:00:1f.2: version 3.0
[    1.820520] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    1.820523] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.821197] scsi host0: ahci
[    1.821400] scsi host1: ahci
[    1.821578] scsi host2: ahci
[    1.821651] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 43
[    1.821653] ata2: DUMMY
[    1.821654] ata3: DUMMY
[    1.821977] [drm] Memory usable by graphics device = 2048M
[    1.821979] [drm] Replacing VGA console driver
[    1.822664] Console: switching to colour dummy device 80x25
[    1.828057] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.828058] [drm] Driver supports precise vblank timestamp query.
[    1.828406] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.838765] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.839352] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.839418] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.891627] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[    1.926196] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[    1.992466] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2749, fw id: 1486693
[    1.992475] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.024319] fbcon: inteldrmfb (fb0) is primary device
[    2.033582] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.111039] random: fast init done
[    2.130887] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.133699] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.134790] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.134792] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.134890] usb 2-6: new full-speed USB device number 2 using xhci_hcd
[    2.167591] ata1.00: ATA-8: HGST HTS725050A7E630, GS2ZC230, max UDMA/133
[    2.167593] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.168708] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.168711] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.169597] ata1.00: configured for UDMA/133
[    2.169970] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 C230 PQ: 0 ANSI: 5
[    2.276388] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
[    2.276390] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.276392] usb 2-6: SerialNumber: 069c49e9f882
[    2.279184] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    2.279186] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.280068] hub 1-1:1.0: USB hub found
[    2.280184] hub 1-1:1.0: 8 ports detected
[    2.306954] tsc: Refined TSC clocksource calibration: 2394.453 MHz
[    2.306963] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283bf4e6f2, max_idle_ns: 440795216136 ns
[    2.394893] usb 2-7: new full-speed USB device number 3 using xhci_hcd
[    2.536474] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.536476] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.654903] usb 2-8: new high-speed USB device number 4 using xhci_hcd
[    2.707470] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.863453] usb 2-8: New USB device found, idVendor=04f2, idProduct=b39a
[    2.863455] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.863457] usb 2-8: Product: Integrated Camera
[    2.863459] usb 2-8: Manufacturer: SunplusIT INC.
[    2.941571] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    3.330971] clocksource: Switched to clocksource tsc
[    3.524528] Console: switching to colour frame buffer device 170x48
[    3.544215] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.562444] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.562447] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.562498] sd 0:0:0:0: [sda] Write Protect is off
[    3.562502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.562519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.638623]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    3.639775] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.382192] md: linear personality registered for level -1
[    4.383931] md: multipath personality registered for level -4
[    4.385417] md: raid0 personality registered for level 0
[    4.387067] md: raid1 personality registered for level 1
[    4.454744] raid6: sse2x1   gen()  5072 MB/s
[    4.522732] raid6: sse2x1   xor()  3830 MB/s
[    4.590712] raid6: sse2x2   gen()  6446 MB/s
[    4.658711] raid6: sse2x2   xor()  4348 MB/s
[    4.726705] raid6: sse2x4   gen()  7413 MB/s
[    4.794702] raid6: sse2x4   xor()  5251 MB/s
[    4.862707] raid6: avx2x1   gen()  9907 MB/s
[    4.930721] raid6: avx2x2   gen() 11510 MB/s
[    4.998693] raid6: avx2x4   gen() 13367 MB/s
[    4.998695] raid6: using algorithm avx2x4 gen() 13367 MB/s
[    4.998696] raid6: using avx2x2 recovery algorithm
[    4.998951] xor: automatically using best checksumming function   avx       
[    4.999168] async_tx: api initialized (async)
[    5.001119] md: raid6 personality registered for level 6
[    5.001121] md: raid5 personality registered for level 5
[    5.001122] md: raid4 personality registered for level 4
[    5.005452] md: raid10 personality registered for level 10
[    5.934239] Btrfs loaded, crc32c=crc32c-intel
[    6.459813] PM: Starting manual resume from disk
[    6.459816] PM: Hibernation image partition 8:5 present
[    6.459817] PM: Looking for hibernation image.
[    6.459944] PM: Image not found (code -22)
[    6.459945] PM: Hibernation image not present or could not be loaded.
[    6.740856] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.967921] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[    7.656455] random: crng init done
[    7.774399] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.856939] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    7.857108] systemd[1]: Detected architecture x86-64.
[    7.860078] systemd[1]: Set hostname to <eleven220-pc>.
[    8.894590] systemd[1]: Unnecessary job for HGST_HTS725050A7E630 6 was removed.
[    8.896339] systemd[1]: Listening on Process Core Dump Socket.
[    8.896413] systemd[1]: Listening on udev Kernel Socket.
[    8.896461] systemd[1]: Listening on Journal Socket.
[    8.896654] systemd[1]: Created slice User and Session Slice.
[    8.896693] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.896748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.477669] lp: driver loaded but no devices found
[    9.602021] ppdev: user-space parallel port driver
[    9.839926] fuse init (API version 7.26)
[   10.358221] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[   10.381612] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[   10.726911] ACPI: AC Adapter [AC] (on-line)
[   10.762704] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.796690] ACPI: Battery Slot [BAT0] (battery present)
[   10.808002] ACPI: Battery Slot [BAT1] (battery present)
[   10.862621] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.997642] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   10.997645] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   10.997646] RAPL PMU: hw unit of domain package 2^-14 Joules
[   10.997648] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   10.997649] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   11.059785] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   11.109929] Non-volatile memory driver v1.3
[   11.187487] Intel(R) Wireless WiFi driver for Linux
[   11.187489] Copyright(c) 2003- 2015 Intel Corporation
[   11.231279] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   11.231281] thinkpad_acpi: http://ibm-acpi.sf.net/
[   11.231282] thinkpad_acpi: ThinkPad BIOS GIET74WW (2.24 ), EC unknown
[   11.231283] thinkpad_acpi: Lenovo ThinkPad X240, model 20AMA37DCD
[   11.231954] thinkpad_acpi: radio switch found; radios are enabled
[   11.231967] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   11.231968] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   11.233459] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   11.245801] iTCO_vendor_support: vendor-support=0
[   11.246452] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.246510] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[   11.246672] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.265508] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[   11.317764] wl: loading out-of-tree module taints kernel.
[   11.317767] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.317768] Disabling lock debugging due to kernel taint
[   11.499935] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.608103] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
[   11.608507] iwlwifi 0000:03:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[   11.612118] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.612120] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.612122] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[   11.612123] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   11.612124] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   11.612126] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[   11.612128] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   11.612129] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   11.635610] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   11.635811] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   11.635897] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   11.635978] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   11.636064] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   11.831494] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   11.831550] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   11.831599] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   11.848066] Bluetooth: Core ver 2.22
[   11.848078] NET: Registered protocol family 31
[   11.848079] Bluetooth: HCI device and connection manager initialized
[   11.848082] Bluetooth: HCI socket layer initialized
[   11.848084] Bluetooth: L2CAP socket layer initialized
[   11.848088] Bluetooth: SCO socket layer initialized
[   11.866533] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[   11.868875] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   11.869399] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   12.057384] intel_rapl: Found RAPL domain package
[   12.057386] intel_rapl: Found RAPL domain core
[   12.057387] intel_rapl: Found RAPL domain uncore
[   12.057389] intel_rapl: Found RAPL domain dram
[   12.149797] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   12.162200] usbcore: registered new interface driver btusb
[   12.175859] Bluetooth: hci0: read Intel version: 370710018002030d56
[   12.175861] Bluetooth: hci0: Intel device is already patched. patch num: 56
[   12.249281] media: Linux media interface: v0.10
[   12.286233] Linux video capture interface: v2.00
[   12.386906] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
[   12.395457] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[   12.395463] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
[   12.395466] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[   12.395469] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[   12.395619] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18
[   12.395745] usbcore: registered new interface driver uvcvideo
[   12.395747] USB Video Class driver (1.1.1)
[   12.654144] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   13.654401] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[   13.703300] systemd-journald[279]: Received request to flush runtime journal from PID 1
[   14.044832] Adding 8067068k swap on /dev/sda5.  Priority:-1 extents:1 across:8067068k FS
[   15.187747] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[   16.183246] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[   20.680460] vboxdrv: Found 4 processor cores
[   20.702094] vboxdrv: TSC mode is Invariant, tentative frequency 2394451717 Hz
[   20.702095] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[   21.035830] VBoxNetFlt: Successfully started.
[   21.340111] VBoxNetAdp: Successfully started.
[   21.592668] VBoxPciLinuxInit
[   21.640519] vboxpci: IOMMU not found (not registered)
[   23.828613] NET: Registered protocol family 15
[   24.130959] Initializing XFRM netlink socket
[   36.164587] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   36.353330] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   36.357483] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   36.359888] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   36.360412] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   36.581020] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   36.581703] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   36.610095] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.658600] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.632414] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[   38.639311] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[   38.641258] wlp3s0: authenticated
[   38.645060] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[   38.648920] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[   38.651868] wlp3s0: associated
[   38.651916] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1297.154930] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1313.797712] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 1313.802015] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 1313.805495] wlp3s0: authenticated
[ 1313.806244] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 1313.813636] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 1313.818657] wlp3s0: associated
[ 1313.818702] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 2008.692417] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 2008.696940] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 2008.699937] wlp3s0: authenticated
[ 2008.704830] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 2008.828828] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 2/3)
[ 2008.932890] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 3/3)
[ 2008.946650] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 2008.952553] wlp3s0: associated
[ 2583.932188] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 2583.936508] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 2583.938389] wlp3s0: authenticated
[ 2583.940072] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 2583.952952] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 2583.963154] wlp3s0: associated
[ 2692.078413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2728.505508] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 2728.509653] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 2728.513256] wlp3s0: authenticated
[ 2728.514698] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 2728.518788] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 2728.523989] wlp3s0: associated
[ 2728.524041] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 4142.007830] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4142.514367] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 4142.518409] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 4142.524415] wlp3s0: authenticated
[ 4142.527711] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 4142.535103] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 4142.536027] wlp3s0: associated
[ 4142.536072] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 4459.572860] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 4459.577057] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 4459.580820] wlp3s0: authenticated
[ 4459.584308] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 4459.590039] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 4459.592899] wlp3s0: associated
[ 5595.145369] wlp3s0: authenticate with e0:1d:3b:2c:00:ec
[ 5595.150111] wlp3s0: send auth to e0:1d:3b:2c:00:ec (try 1/3)
[ 5595.157116] wlp3s0: authenticated
[ 5595.159776] wlp3s0: associate with e0:1d:3b:2c:00:ec (try 1/3)
[ 5595.168608] wlp3s0: RX AssocResp from e0:1d:3b:2c:00:ec (capab=0x431 status=0 aid=2)
[ 5595.173215] wlp3s0: associated
[ 5787.350412] thinkpad_acpi: EC reports that Thermal Table has changed
[ 7263.854178] wlp3s0: deauthenticating from e0:1d:3b:2c:00:ec by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7268.936501] PM: Syncing filesystems ... done.
[ 7269.451083] PM: Preparing system for sleep (mem)
[ 7269.451684] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[ 7269.451698] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 7269.453932] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7269.455151] PM: Suspending system (mem)
[ 7269.455179] Suspending console(s) (use no_console_suspend to debug)
[ 7269.459532] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7269.571332] sd 0:0:0:0: [sda] Stopping disk
[ 7269.656290] e1000e: EEE TX LPI TIMER: 00000011
[ 7270.870843] PM: suspend of devices complete after 1415.597 msecs
[ 7270.887387] PM: late suspend of devices complete after 16.540 msecs
[ 7270.890105] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 7270.890182] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 7270.890195] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 7270.939324] PM: noirq suspend of devices complete after 51.936 msecs
[ 7270.939671] ACPI: Preparing to enter system sleep state S3
[ 7271.227321] ACPI : EC: event blocked
[ 7271.227322] ACPI : EC: EC stopped
[ 7271.227322] PM: Saving platform NVS memory
[ 7271.227338] Disabling non-boot CPUs ...
[ 7271.259571] Broke affinity for irq 42
[ 7271.260896] smpboot: CPU 1 is now offline
[ 7271.283541] Broke affinity for irq 42
[ 7271.283543] Broke affinity for irq 44
[ 7271.283545] Broke affinity for irq 46
[ 7271.284567] smpboot: CPU 2 is now offline
[ 7271.303451] Broke affinity for irq 1
[ 7271.303460] Broke affinity for irq 9
[ 7271.303464] Broke affinity for irq 12
[ 7271.303472] Broke affinity for irq 23
[ 7271.303476] Broke affinity for irq 42
[ 7271.303477] Broke affinity for irq 43
[ 7271.303478] Broke affinity for irq 44
[ 7271.303479] Broke affinity for irq 46
[ 7271.304490] smpboot: CPU 3 is now offline
[ 7271.306025] ACPI: Low-level resume complete
[ 7271.306085] ACPI : EC: EC started
[ 7271.306086] PM: Restoring platform NVS memory
[ 7271.306417] Suspended for 35926.265 seconds
[ 7271.306461] Enabling non-boot CPUs ...
[ 7271.306521] x86: Booting SMP configuration:
[ 7271.306522] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7271.309108]  cache: parent cpu1 should not be sleeping
[ 7271.309446] CPU1 is up
[ 7271.309494] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7271.311919]  cache: parent cpu2 should not be sleeping
[ 7271.312289] CPU2 is up
[ 7271.312333] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7271.314859]  cache: parent cpu3 should not be sleeping
[ 7271.315320] CPU3 is up
[ 7271.318614] ACPI: Waking up from system sleep state S3
[ 7271.972776] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 7271.972818] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 7271.972868] PM: noirq resume of devices complete after 52.075 msecs
[ 7271.973219] PM: early resume of devices complete after 0.331 msecs
[ 7271.973311] usb usb2: root hub lost power or was reset
[ 7271.973313] usb usb3: root hub lost power or was reset
[ 7271.973401] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 7271.973523] ACPI : EC: event unblocked
[ 7271.974387] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 7271.983641] sd 0:0:0:0: [sda] Starting disk
[ 7272.212736] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 7272.364814] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[ 7272.381971] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[ 7272.415701] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[ 7272.624780] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[ 7272.884769] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[ 7273.026033] PM: resume of devices complete after 1052.870 msecs
[ 7273.026138] usb 2-7:1.0: rebind failed: -517
[ 7273.026140] usb 2-7:1.1: rebind failed: -517
[ 7273.026302] PM: Finishing wakeup.
[ 7273.026303] Restarting tasks ... done.
[ 7273.056266] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 7273.148685] usb 2-1: new full-speed USB device number 5 using xhci_hcd
[ 7273.290271] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[ 7273.290274] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7273.290275] usb 2-1: Product: USB Device
[ 7273.290277] usb 2-1: Manufacturer: A4TECH
[ 7273.676658] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7273.677804] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7273.677807] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7273.680090] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7273.680093] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7273.681093] ata1.00: configured for UDMA/133
[ 7273.743745] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 7273.743751] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 7273.803909] hidraw: raw HID events driver (C) Jiri Kosina
[ 7273.844005] usbcore: registered new interface driver usbhid
[ 7273.844007] usbhid: USB HID core driver
[ 7273.863537] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0001/input/input19
[ 7273.887966] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7273.887968] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 7273.887997] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 7273.916217] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 7273.921242] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[ 7273.921567] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0002/input/input20
[ 7273.921758] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[ 7274.148190] e1000e: enp0s25 NIC Link is Down
[ 7274.150516] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 7274.344926] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 7274.346275] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7274.348862] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 7274.349400] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 7274.582722] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 7274.583348] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 7274.608119] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7274.685558] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7275.734942] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[ 7275.739544] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[ 7275.840552] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 2/3)
[ 7275.896642] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7275.896650] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 7275.896711] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 7275.954806] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 3/3)
[ 7276.060526] wlp3s0: authentication with 5c:dd:70:fa:80:90 timed out
[ 7276.275571] wlp3s0: authenticate with 70:ba:ef:b5:0d:d0
[ 7276.280262] wlp3s0: send auth to 70:ba:ef:b5:0d:d0 (try 1/3)
[ 7276.290546] wlp3s0: authenticated
[ 7276.292517] wlp3s0: associate with 70:ba:ef:b5:0d:d0 (try 1/3)
[ 7276.329414] wlp3s0: RX AssocResp from 70:ba:ef:b5:0d:d0 (capab=0x8431 status=0 aid=6)
[ 7276.341894] wlp3s0: associated
[ 7276.342131] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7283.289369] wlp3s0: deauthenticating from 70:ba:ef:b5:0d:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7326.198120] tun: Universal TUN/TAP device driver, 1.6
[ 7326.198122] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 9276.341518] thinkpad_acpi: EC reports that Thermal Table has changed
[14117.785590] usb 2-1: USB disconnect, device number 5
[14123.295383] usb 2-1: new full-speed USB device number 6 using xhci_hcd
[14123.436932] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[14123.436935] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[14123.436936] usb 2-1: Product: USB Device
[14123.436937] usb 2-1: Manufacturer: A4TECH
[14123.439306] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0003/input/input21
[14123.500365] hid-generic 0003:09DA:054F.0003: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[14123.501951] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0004/input/input22
[14123.502337] hid-generic 0003:09DA:054F.0004: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[15786.175763] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[21102.308338] perf: interrupt took too long (3169 > 3167), lowering kernel.perf_event_max_sample_rate to 63000
[24270.796222] perf: interrupt took too long (4012 > 3961), lowering kernel.perf_event_max_sample_rate to 49750
[33544.976852] perf: interrupt took too long (5017 > 5015), lowering kernel.perf_event_max_sample_rate to 39750
[38714.194524] usb 2-1: USB disconnect, device number 6
[38714.867030] thinkpad_acpi: EC reports that Thermal Table has changed
[38715.338178] e1000e: enp0s25 NIC Link is Down
[38721.879187] PM: Syncing filesystems ... done.
[38722.653085] PM: Preparing system for sleep (mem)
[38722.653563] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[38722.679290] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38722.679346] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38722.681661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38722.682939] PM: Suspending system (mem)
[38722.682973] Suspending console(s) (use no_console_suspend to debug)
[38722.683354] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38722.870389] e1000e: EEE TX LPI TIMER: 00000011
[38722.879167] sd 0:0:0:0: [sda] Stopping disk
[38724.068802] PM: suspend of devices complete after 1385.731 msecs
[38724.089524] PM: late suspend of devices complete after 20.718 msecs
[38724.091469] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[38724.092050] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[38724.092126] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[38724.141433] PM: noirq suspend of devices complete after 51.907 msecs
[38724.141780] ACPI: Preparing to enter system sleep state S3
[38724.429437] ACPI : EC: event blocked
[38724.429437] ACPI : EC: EC stopped
[38724.429438] PM: Saving platform NVS memory
[38724.429453] Disabling non-boot CPUs ...
[38724.453684] Broke affinity for irq 42
[38724.453686] Broke affinity for irq 43
[38724.455016] smpboot: CPU 1 is now offline
[38724.473659] Broke affinity for irq 42
[38724.473661] Broke affinity for irq 43
[38724.473663] Broke affinity for irq 44
[38724.473665] Broke affinity for irq 46
[38724.474686] smpboot: CPU 2 is now offline
[38724.501565] Broke affinity for irq 1
[38724.501574] Broke affinity for irq 9
[38724.501578] Broke affinity for irq 12
[38724.501586] Broke affinity for irq 23
[38724.501590] Broke affinity for irq 42
[38724.501591] Broke affinity for irq 43
[38724.501592] Broke affinity for irq 44
[38724.501594] Broke affinity for irq 46
[38724.502605] smpboot: CPU 3 is now offline
[38724.504168] ACPI: Low-level resume complete
[38724.504228] ACPI : EC: EC started
[38724.504229] PM: Restoring platform NVS memory
[38724.504558] Suspended for 2437.217 seconds
[38724.504620] Enabling non-boot CPUs ...
[38724.504680] x86: Booting SMP configuration:
[38724.504681] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38724.507235]  cache: parent cpu1 should not be sleeping
[38724.507573] CPU1 is up
[38724.507631] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38724.510155]  cache: parent cpu2 should not be sleeping
[38724.510531] CPU2 is up
[38724.510576] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38724.513104]  cache: parent cpu3 should not be sleeping
[38724.513584] CPU3 is up
[38724.516872] ACPI: Waking up from system sleep state S3
[38725.166846] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[38725.166887] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[38725.166949] PM: noirq resume of devices complete after 52.089 msecs
[38725.167342] PM: early resume of devices complete after 0.374 msecs
[38725.167418] usb usb2: root hub lost power or was reset
[38725.167420] usb usb3: root hub lost power or was reset
[38725.170581] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[38725.182858] ACPI : EC: event unblocked
[38725.215262] rtc_cmos 00:02: System wakeup disabled by ACPI
[38725.224812] sd 0:0:0:0: [sda] Starting disk
[38725.450830] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[38725.558870] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[38725.630165] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[38725.663614] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[38725.818853] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[38726.078834] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[38726.276768] PM: resume of devices complete after 1109.479 msecs
[38726.276873] usb 2-7:1.0: rebind failed: -517
[38726.276875] usb 2-7:1.1: rebind failed: -517
[38726.277036] PM: Finishing wakeup.
[38726.277037] Restarting tasks ... done.
[38726.308317] Bluetooth: hci0: read Intel version: 370710018002030d00
[38726.308322] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38726.432309] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38726.858734] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38726.859813] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38726.859816] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38726.862016] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38726.862019] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38726.863037] ata1.00: configured for UDMA/133
[38727.356441] e1000e: enp0s25 NIC Link is Down
[38727.357234] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[38727.358010] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[38727.543080] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[38727.545809] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38727.548281] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[38727.548906] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[38727.766895] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[38727.767522] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[38727.788982] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38727.842691] usb 2-1: new low-speed USB device number 7 using xhci_hcd
[38727.885744] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38727.989476] usb 2-1: New USB device found, idVendor=2188, idProduct=0ae1
[38727.989479] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[38727.989480] usb 2-1: Product:  USB OPTICAL MOUSE
[38727.991841] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:2188:0AE1.0005/input/input23
[38727.992027] hid-generic 0003:2188:0AE1.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
[38798.728266] wlp3s0: authenticate with 76:72:4f:56:c8:52
[38798.732964] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[38798.734941] wlp3s0: authenticated
[38798.743391] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[38798.761542] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[38798.767696] wlp3s0: associated
[38798.767757] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[41838.992922] usb 2-1: USB disconnect, device number 7
[41901.173081] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[41901.173092] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[41901.173096] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[41901.173099] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[41901.173101] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[41901.173101] mce: [Hardware Error]: Machine check events logged
[41901.173106] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[41901.173109] mce: [Hardware Error]: Machine check events logged
[41901.174078] CPU3: Package temperature/speed normal
[41901.174079] CPU2: Package temperature/speed normal
[41901.174080] CPU1: Core temperature/speed normal
[41901.174082] CPU1: Package temperature/speed normal
[41901.174093] CPU0: Core temperature/speed normal
[41901.174099] CPU0: Package temperature/speed normal
[42225.103692] usb 2-1: new low-speed USB device number 8 using xhci_hcd
[42225.246672] usb 2-1: New USB device found, idVendor=2188, idProduct=0ae1
[42225.246675] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[42225.246677] usb 2-1: Product:  USB OPTICAL MOUSE
[42225.250663] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:2188:0AE1.0006/input/input24
[42225.250958] hid-generic 0003:2188:0AE1.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
[42314.132779] thinkpad_acpi: EC reports that Thermal Table has changed
[55870.702583] byzanz-record[28675]: segfault at 100000000 ip 00007f4404464c88 sp 00007ffe9a99f498 error 4 in libcairo.so.2.11400.10[7f440442d000+10e000]
[57049.203312] SUPR0GipMap: fGetGipCpu=0xb
[57050.015204] vboxdrv: ffffffffc0000020 VMMR0.r0
[57050.247800] vboxdrv: ffffffffc0116020 VBoxDDR0.r0
[57099.812580] vboxdrv: ffffffffc14e8020 VMMR0.r0
[57099.961840] vboxdrv: ffffffffc0137020 VBoxDDR0.r0
[57135.848510] vboxdrv: ffffffffc0000020 VMMR0.r0
[57136.037902] vboxdrv: ffffffffc0116020 VBoxDDR0.r0
[58707.098714] wlp3s0: deauthenticated from 76:72:4f:56:c8:52 (Reason: 3=DEAUTH_LEAVING)
[58707.667178] wlp3s0: authenticate with 76:72:4f:56:c8:52
[58707.671596] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[58707.741617] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 2/3)
[58707.813656] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 3/3)
[58707.876465] wlp3s0: authentication with 76:72:4f:56:c8:52 timed out
[58722.302891] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[58976.154947] wlp3s0: authenticate with 76:72:4f:56:c8:52
[58976.158768] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[58976.161103] wlp3s0: authenticated
[58976.163431] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[58976.186011] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[58976.186984] wlp3s0: associated
[58976.187043] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[59459.124661] wlp3s0: authenticate with 76:72:4f:56:c8:52
[59459.129140] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[59459.218045] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 2/3)
[59459.309778] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 3/3)
[59459.411597] wlp3s0: authentication with 76:72:4f:56:c8:52 timed out
[59474.614920] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[60171.074139] PM: Syncing filesystems ... done.
[60171.607580] PM: Preparing system for sleep (mem)
[60171.647460] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[60171.647497] Freezing user space processes ... (elapsed 0.002 seconds) done.
[60171.650033] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[60171.651354] PM: Suspending system (mem)
[60171.651383] Suspending console(s) (use no_console_suspend to debug)
[60171.651857] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[60171.841338] e1000e: EEE TX LPI TIMER: 00000011
[60171.845863] sd 0:0:0:0: [sda] Stopping disk
[60173.047912] PM: suspend of devices complete after 1396.181 msecs
[60173.064531] PM: late suspend of devices complete after 16.613 msecs
[60173.066440] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[60173.066971] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[60173.067034] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[60173.116486] PM: noirq suspend of devices complete after 51.944 msecs
[60173.116834] ACPI: Preparing to enter system sleep state S3
[60173.404546] ACPI : EC: event blocked
[60173.404546] ACPI : EC: EC stopped
[60173.404547] PM: Saving platform NVS memory
[60173.404563] Disabling non-boot CPUs ...
[60173.428816] Broke affinity for irq 42
[60173.430199] smpboot: CPU 1 is now offline
[60173.456780] Broke affinity for irq 42
[60173.456782] Broke affinity for irq 43
[60173.456784] Broke affinity for irq 44
[60173.457801] smpboot: CPU 2 is now offline
[60173.480695] Broke affinity for irq 1
[60173.480704] Broke affinity for irq 9
[60173.480708] Broke affinity for irq 12
[60173.480717] Broke affinity for irq 23
[60173.480720] Broke affinity for irq 42
[60173.480721] Broke affinity for irq 43
[60173.480722] Broke affinity for irq 44
[60173.480724] Broke affinity for irq 46
[60173.481737] smpboot: CPU 3 is now offline
[60173.483299] ACPI: Low-level resume complete
[60173.483360] ACPI : EC: EC started
[60173.483360] PM: Restoring platform NVS memory
[60173.483689] Suspended for 29633.367 seconds
[60173.483746] Enabling non-boot CPUs ...
[60173.483807] x86: Booting SMP configuration:
[60173.483808] smpboot: Booting Node 0 Processor 1 APIC 0x1
[60173.486371]  cache: parent cpu1 should not be sleeping
[60173.486720] CPU1 is up
[60173.486779] smpboot: Booting Node 0 Processor 2 APIC 0x2
[60173.489281]  cache: parent cpu2 should not be sleeping
[60173.489675] CPU2 is up
[60173.489722] smpboot: Booting Node 0 Processor 3 APIC 0x3
[60173.492258]  cache: parent cpu3 should not be sleeping
[60173.492742] CPU3 is up
[60173.495938] ACPI: Waking up from system sleep state S3
[60173.850163] thinkpad_acpi: EC reports that Thermal Table has changed
[60174.206048] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[60174.206089] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[60174.206148] PM: noirq resume of devices complete after 52.090 msecs
[60174.206510] PM: early resume of devices complete after 0.343 msecs
[60174.206586] usb usb2: root hub lost power or was reset
[60174.206589] usb usb3: root hub lost power or was reset
[60174.206718] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[60174.206806] ACPI : EC: event unblocked
[60174.208274] rtc_cmos 00:02: System wakeup disabled by ACPI
[60174.216957] sd 0:0:0:0: [sda] Starting disk
[60174.446064] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[60174.598200] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[60174.614126] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[60174.648399] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[60174.858161] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[60175.118213] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[60175.850273] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[60175.851378] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[60175.851380] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[60175.853668] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[60175.853671] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[60175.854726] ata1.00: configured for UDMA/133
[60176.121764] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[60176.121766] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[60176.121792] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[60177.279737] PM: resume of devices complete after 3072.819 msecs
[60177.279867] usb 2-7:1.0: rebind failed: -517
[60177.279869] usb 2-7:1.1: rebind failed: -517
[60177.280051] PM: Finishing wakeup.
[60177.280052] Restarting tasks ... 
[60177.288454] usb 2-1: USB disconnect, device number 8
[60177.289970] done.
[60177.308550] Bluetooth: hci0: read Intel version: 370710018002030d00
[60177.308861] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[60177.308865] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[60177.444512] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[60178.022214] e1000e: enp0s25 NIC Link is Down
[60178.028050] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[60178.222737] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[60178.224392] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[60178.226740] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[60178.227537] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[60178.430782] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[60178.431357] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[60178.454541] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[60178.643021] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[60179.698051] wlp3s0: authenticate with 5c:dd:70:fa:80:90
[60179.704689] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 1/3)
[60179.775549] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[60179.775554] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[60179.775695] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[60179.806769] wlp3s0: send auth to 5c:dd:70:fa:80:90 (try 2/3)
[60179.809650] wlp3s0: authenticated
[60179.810786] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 1/3)
[60179.922763] wlp3s0: associate with 5c:dd:70:fa:80:90 (try 2/3)
[60179.932495] wlp3s0: RX AssocResp from 5c:dd:70:fa:80:90 (capab=0x8431 status=0 aid=3)
[60179.933920] wlp3s0: associated
[60179.933993] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[60180.706878] usb 2-1: new full-speed USB device number 9 using xhci_hcd
[60180.848523] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[60180.848530] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[60180.848531] usb 2-1: Product: USB Device
[60180.848532] usb 2-1: Manufacturer: A4TECH
[60180.850734] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0007/input/input25
[60180.907214] hid-generic 0003:09DA:054F.0007: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[60180.908871] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.0008/input/input26
[60180.909029] hid-generic 0003:09DA:054F.0008: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[60186.729308] wlp3s0: deauthenticating from 5c:dd:70:fa:80:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[63837.477728] thinkpad_acpi: EC reports that Thermal Table has changed
[76300.591712] thinkpad_acpi: EC reports that Thermal Table has changed
[76304.250643] e1000e: enp0s25 NIC Link is Down
[76798.637184] usb 2-1: USB disconnect, device number 9
[76799.255548] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[76799.255557] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[85373.542210] thinkpad_acpi: EC reports that Thermal Table has changed
[85378.261067] usb 2-1: new full-speed USB device number 10 using xhci_hcd
[85378.402563] usb 2-1: New USB device found, idVendor=09da, idProduct=054f
[85378.402565] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85378.402566] usb 2-1: Product: USB Device
[85378.402567] usb 2-1: Manufacturer: A4TECH
[85378.404736] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:054F.0009/input/input27
[85378.461454] hid-generic 0003:09DA:054F.0009: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0
[85378.462553] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:054F.000A/input/input28
[85378.462759] hid-generic 0003:09DA:054F.000A: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1
[94521.250266] usb 2-2: new high-speed USB device number 11 using xhci_hcd
[94521.391453] usb 2-2: New USB device found, idVendor=05ac, idProduct=12a8
[94521.391457] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[94521.391459] usb 2-2: Product: iPhone
[94521.391461] usb 2-2: Manufacturer: Apple Inc.
[94521.391463] usb 2-2: SerialNumber: 40b0bfe8ddad4c7fbeb2ac97ef455c417f1bef79
[94522.902175] ipheth 2-2:4.2: ipheth_get_macaddr: usb_control_msg: -110
[94522.902200] ipheth: probe of 2-2:4.2 failed with error -110
[94522.902272] usbcore: registered new interface driver ipheth
[95892.999003] usb 2-2: USB disconnect, device number 11
[95893.972770] usb 2-1: USB disconnect, device number 10
[95895.215883] thinkpad_acpi: EC reports that Thermal Table has changed
[95895.423451] e1000e: enp0s25 NIC Link is Down
[95898.406121] PM: Syncing filesystems ... done.
[95899.346013] PM: Preparing system for sleep (mem)
[95899.346291] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[95899.346483] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[95899.346494] Freezing user space processes ... (elapsed 0.002 seconds) done.
[95899.349267] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[95899.350682] PM: Suspending system (mem)
[95899.350711] Suspending console(s) (use no_console_suspend to debug)
[95899.351073] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[95899.532196] e1000e: EEE TX LPI TIMER: 00000011
[95899.600389] sd 0:0:0:0: [sda] Stopping disk
[95900.658384] PM: suspend of devices complete after 1307.585 msecs
[95900.675037] PM: late suspend of devices complete after 16.649 msecs
[95900.676928] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[95900.677033] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[95900.677050] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[95900.726990] PM: noirq suspend of devices complete after 51.952 msecs
[95900.727337] ACPI: Preparing to enter system sleep state S3
[95901.014986] ACPI : EC: event blocked
[95901.014986] ACPI : EC: EC stopped
[95901.014987] PM: Saving platform NVS memory
[95901.015002] Disabling non-boot CPUs ...
[95901.039247] Broke affinity for irq 42
[95901.039249] Broke affinity for irq 43
[95901.040590] smpboot: CPU 1 is now offline
[95901.059214] Broke affinity for irq 42
[95901.059216] Broke affinity for irq 43
[95901.059218] Broke affinity for irq 44
[95901.059220] Broke affinity for irq 46
[95901.060236] smpboot: CPU 2 is now offline
[95901.087114] Broke affinity for irq 1
[95901.087123] Broke affinity for irq 9
[95901.087127] Broke affinity for irq 12
[95901.087135] Broke affinity for irq 23
[95901.087139] Broke affinity for irq 42
[95901.087140] Broke affinity for irq 43
[95901.087141] Broke affinity for irq 44
[95901.087143] Broke affinity for irq 46
[95901.088156] smpboot: CPU 3 is now offline
[95901.089736] ACPI: Low-level resume complete
[95901.089797] ACPI : EC: EC started
[95901.089797] PM: Restoring platform NVS memory
[95901.090126] Suspended for 1478.393 seconds
[95901.090180] Enabling non-boot CPUs ...
[95901.090241] x86: Booting SMP configuration:
[95901.090241] smpboot: Booting Node 0 Processor 1 APIC 0x1
[95901.092786]  cache: parent cpu1 should not be sleeping
[95901.093132] CPU1 is up
[95901.093189] smpboot: Booting Node 0 Processor 2 APIC 0x2
[95901.095691]  cache: parent cpu2 should not be sleeping
[95901.096069] CPU2 is up
[95901.096116] smpboot: Booting Node 0 Processor 3 APIC 0x3
[95901.098644]  cache: parent cpu3 should not be sleeping
[95901.099118] CPU3 is up
[95901.102458] ACPI: Waking up from system sleep state S3
[95901.752354] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[95901.752395] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[95901.752452] PM: noirq resume of devices complete after 52.064 msecs
[95901.752814] PM: early resume of devices complete after 0.342 msecs
[95901.752889] usb usb2: root hub lost power or was reset
[95901.752891] usb usb3: root hub lost power or was reset
[95901.753088] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[95901.756187] sd 0:0:0:0: [sda] Starting disk
[95901.768343] ACPI : EC: event unblocked
[95901.799909] rtc_cmos 00:02: System wakeup disabled by ACPI
[95901.992356] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[95902.144400] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[95902.220345] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[95902.254807] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[95902.404361] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[95902.664372] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[95902.806756] PM: resume of devices complete after 1053.984 msecs
[95902.806860] usb 2-7:1.0: rebind failed: -517
[95902.806862] usb 2-7:1.1: rebind failed: -517
[95902.807022] PM: Finishing wakeup.
[95902.807023] Restarting tasks ... done.
[95902.827874] Bluetooth: hci0: read Intel version: 370710018002030d00
[95902.827880] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[95902.960856] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[95903.444232] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[95903.445267] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95903.445269] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95903.447416] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95903.447419] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95903.448429] ata1.00: configured for UDMA/133
[95903.910208] e1000e: enp0s25 NIC Link is Down
[95903.911211] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95903.911713] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95904.096391] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95904.098206] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95904.100356] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[95904.100875] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[95904.316435] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[95904.317017] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[95904.337020] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95904.409624] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95904.788162] usb 2-1: new low-speed USB device number 12 using xhci_hcd
[95904.931012] usb 2-1: New USB device found, idVendor=2188, idProduct=0ae1
[95904.931016] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[95904.931018] usb 2-1: Product:  USB OPTICAL MOUSE
[95904.935348] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:2188:0AE1.000B/input/input29
[95904.935762] hid-generic 0003:2188:0AE1.000B: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
[96987.426034] wlp3s0: authenticate with 76:72:4f:56:c8:52
[96987.430978] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[96987.432955] wlp3s0: authenticated
[96987.435014] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[96987.443021] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[96987.445584] wlp3s0: associated
[96987.445648] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[97093.189236] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[101326.808166] PM: Syncing filesystems ... done.
[101327.620268] PM: Preparing system for sleep (mem)
[101327.620956] (NULL device *): firmware: direct-loading firmware iwlwifi-7260-17.ucode
[101327.620966] Freezing user space processes ... (elapsed 0.155 seconds) done.
[101327.776397] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[101327.777965] PM: Suspending system (mem)
[101327.777993] Suspending console(s) (use no_console_suspend to debug)
[101327.782393] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[101327.782558] sd 0:0:0:0: [sda] Stopping disk
[101327.971105] e1000e: EEE TX LPI TIMER: 00000011
[101329.190019] PM: suspend of devices complete after 1411.937 msecs
[101329.210507] PM: late suspend of devices complete after 20.486 msecs
[101329.213145] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[101329.213200] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[101329.213276] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[101329.262448] PM: noirq suspend of devices complete after 51.940 msecs
[101329.262795] ACPI: Preparing to enter system sleep state S3
[101329.550446] ACPI : EC: event blocked
[101329.550447] ACPI : EC: EC stopped
[101329.550447] PM: Saving platform NVS memory
[101329.550462] Disabling non-boot CPUs ...
[101329.574696] Broke affinity for irq 42
[101329.576072] smpboot: CPU 1 is now offline
[101329.598661] Broke affinity for irq 42
[101329.598663] Broke affinity for irq 44
[101329.598665] Broke affinity for irq 46
[101329.599681] smpboot: CPU 2 is now offline
[101329.622574] Broke affinity for irq 1
[101329.622582] Broke affinity for irq 9
[101329.622587] Broke affinity for irq 12
[101329.622595] Broke affinity for irq 23
[101329.622598] Broke affinity for irq 42
[101329.622599] Broke affinity for irq 43
[101329.622601] Broke affinity for irq 44
[101329.622602] Broke affinity for irq 46
[101329.623615] smpboot: CPU 3 is now offline
[101329.625126] ACPI: Low-level resume complete
[101329.625187] ACPI : EC: EC started
[101329.625188] PM: Restoring platform NVS memory
[101329.625515] Suspended for 1384.160 seconds
[101329.625563] Enabling non-boot CPUs ...
[101329.625624] x86: Booting SMP configuration:
[101329.625625] smpboot: Booting Node 0 Processor 1 APIC 0x1
[101329.628189]  cache: parent cpu1 should not be sleeping
[101329.628534] CPU1 is up
[101329.628592] smpboot: Booting Node 0 Processor 2 APIC 0x2
[101329.630998]  cache: parent cpu2 should not be sleeping
[101329.631376] CPU2 is up
[101329.631423] smpboot: Booting Node 0 Processor 3 APIC 0x3
[101329.633955]  cache: parent cpu3 should not be sleeping
[101329.634434] CPU3 is up
[101329.637788] ACPI: Waking up from system sleep state S3
[101329.987909] thinkpad_acpi: EC reports that Thermal Table has changed
[101330.351827] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[101330.371824] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[101330.371892] PM: noirq resume of devices complete after 56.084 msecs
[101330.372276] PM: early resume of devices complete after 0.364 msecs
[101330.372349] usb usb2: root hub lost power or was reset
[101330.372352] usb usb3: root hub lost power or was reset
[101330.372446] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[101330.372541] ACPI : button: The lid device is not compliant to SW_LID.
[101330.372551] ACPI : EC: event unblocked
[101330.373551] rtc_cmos 00:02: System wakeup disabled by ACPI
[101330.377718] sd 0:0:0:0: [sda] Starting disk
[101330.611766] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[101330.759824] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[101330.800020] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[101330.834528] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[101331.019805] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[101331.427779] usb 2-1: reset low-speed USB device number 12 using xhci_hcd
[101331.835748] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[101332.007710] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[101332.008793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[101332.008795] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[101332.010989] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[101332.010990] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[101332.012024] ata1.00: configured for UDMA/133
[101332.033574] PM: resume of devices complete after 1661.388 msecs
[101332.033680] usb 2-7:1.0: rebind failed: -517
[101332.033682] usb 2-7:1.1: rebind failed: -517
[101332.033845] PM: Finishing wakeup.
[101332.033846] Restarting tasks ... done.
[101332.071254] Bluetooth: hci0: read Intel version: 370710018002030d00
[101332.071333] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[101332.071336] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[101332.216227] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[101332.619900] e1000e: enp0s25 NIC Link is Down
[101332.622242] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[101332.811809] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[101332.814026] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[101332.815823] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[101332.817706] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[101333.026620] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[101333.027248] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[101333.046464] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[101333.128371] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[101356.985803] wlp3s0: authenticate with 76:72:4f:56:c8:52
[101356.990271] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[101357.001876] wlp3s0: authenticated
[101357.002534] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[101357.018277] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[101357.019287] wlp3s0: associated
[101357.019355] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[101357.638692] wlp3s0: deauthenticating from 76:72:4f:56:c8:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[101359.524843] wlp3s0: authenticate with 76:72:4f:56:c8:52
[101359.529229] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[101359.634117] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 2/3)
[101359.731336] wlp3s0: authenticated
[101359.734318] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[101359.838105] wlp3s0: associate with 76:72:4f:56:c8:52 (try 2/3)
[101359.903721] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[101359.905189] wlp3s0: associated
[101360.973888] wlp3s0: deauthenticating from 76:72:4f:56:c8:52 by local choice (Reason: 3=DEAUTH_LEAVING)
[101361.308696] wlp3s0: authenticate with 76:72:4f:56:c8:52
[101361.313202] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[101361.418021] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 2/3)
[101361.533595] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 3/3)
[101361.642027] wlp3s0: authentication with 76:72:4f:56:c8:52 timed out
[101372.514873] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[101374.242017] wlp3s0: authenticate with 76:72:4f:56:c8:52
[101374.250736] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[101374.290797] wlp3s0: authenticated
[101374.293295] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[101374.383518] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[101374.386091] wlp3s0: associated
[101374.386148] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[104512.540082] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[109237.773580] wlp3s0: authenticate with 76:72:4f:56:c8:52
[109237.780935] wlp3s0: send auth to 76:72:4f:56:c8:52 (try 1/3)
[109237.837606] wlp3s0: authenticated
[109237.841419] wlp3s0: associate with 76:72:4f:56:c8:52 (try 1/3)
[109237.848516] wlp3s0: RX AssocResp from 76:72:4f:56:c8:52 (capab=0x411 status=0 aid=1)
[109237.850216] wlp3s0: associated
[109237.850297] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[110841.544707] usb 2-1: USB disconnect, device number 12
[110842.615951] thinkpad_acpi: EC reports that Thermal Table has changed
[111257.170196] traps: sogou-qimpanel[13471] general protection ip:43b9ba sp:7fff0f6e4c00 error:0
[111257.170201]  in sogou-qimpanel[400000+3de000]
[111257.274735] systemd-coredump[21309]: Failed to get COMM, falling back to the command line: No such process
[111257.274745] systemd-coredump[21309]: Failed to get EXE, ignoring: No such process
[111289.040757] usb 2-1: new low-speed USB device number 13 using xhci_hcd
[111289.183769] usb 2-1: New USB device found, idVendor=2188, idProduct=0ae1
[111289.183774] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[111289.183777] usb 2-1: Product:  USB OPTICAL MOUSE
[111289.186907] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:2188:0AE1.000C/input/input30
[111289.187256] hid-generic 0003:2188:0AE1.000C: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-1/input0
