[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.9.0-deepin12-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP PREEMPT Deepin 4.9.40-3 (2017-09-19) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin12-amd64 root=UUID=522230b2-08eb-43b7-aed2-07865acacea0 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bce3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bce3f000-0x00000000bcebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcebf000-0x00000000bcfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfbf000-0x00000000bcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20078                           /Base Board Product Name, BIOS 40CN23WW(V2.09) 06/20/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-protect
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13FE00000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8a41800fe1b0]
[    0.000000] Base memory trampoline at [ffff8a4180097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x12df24000, 0x12df24fff] PGTABLE
[    0.000000] BRK [0x12df25000, 0x12df25fff] PGTABLE
[    0.000000] BRK [0x12df26000, 0x12df26fff] PGTABLE
[    0.000000] BRK [0x12df27000, 0x12df27fff] PGTABLE
[    0.000000] BRK [0x12df28000, 0x12df28fff] PGTABLE
[    0.000000] BRK [0x12df29000, 0x12df29fff] PGTABLE
[    0.000000] BRK [0x12df2a000, 0x12df2afff] PGTABLE
[    0.000000] BRK [0x12df2b000, 0x12df2bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32c61000-0x35627fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BCFFE120 00009C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BCFFB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000BCFEE000 00938E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000BCF6E000 000040
[    0.000000] ACPI: FACS 0x00000000BCF6E000 000040
[    0.000000] ACPI: SLIC 0x00000000BCFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000BCFFC000 0000A5 (v32 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000BCFFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000BCFF9000 00008C (v02 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000BCFF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000BCFED000 000224 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFEC000 0006FE (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000BCFEA000 000028 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFE9000 000C39 (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFE8000 0006C5 (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000BCFE7000 000034 (v07 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFE6000 000780 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFE5000 000996 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BCFE3000 0016E0 (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fdfb000-0x13fdfffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bce3efff]
[    0.000000]   node   0: [mem 0x00000000bcfff000-0x00000000bcffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fdfffff]
[    0.000000] On node 0 totalpages: 1034204
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12009 pages used for memmap
[    0.000000]   DMA32 zone: 768576 pages, LIFO batch:31
[    0.000000]   Normal zone: 4088 pages used for memmap
[    0.000000]   Normal zone: 261632 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bda00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbce3f000-0xbcebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbcebf000-0xbcfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbcfbf000-0xbcffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8a42bfa00000 s103896 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s103896 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1017887
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin12-amd64 root=UUID=522230b2-08eb-43b7-aed2-07865acacea0 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3945168K/4136816K available (6264K kernel code, 1142K rwdata, 2864K rodata, 1348K init, 688K bss, 191648K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.880 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.76 BogoMIPS (lpj=9179520)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000049] ACPI: Core revision 20160831
[    0.008576] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.008631] Security Framework initialized
[    0.008633] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.008638] AppArmor: AppArmor disabled by boot time parameter
[    0.008895] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009769] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010138] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010144] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010419] CPU: Physical Processor ID: 0
[    0.010420] CPU: Processor Core ID: 0
[    0.010425] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010426] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010428] mce: CPU supports 7 MCE banks
[    0.010443] process: using mwait in idle threads
[    0.010446] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.010447] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.010849] Freeing SMP alternatives memory: 24K (ffffffff95670000 - ffffffff95676000)
[    0.027403] ftrace: allocating 25166 entries in 99 pages
[    0.040177] smpboot: Max logical packages: 4
[    0.040251] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.040704] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080394] TSC deadline timer enabled
[    0.080397] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.080402] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.080425] ... version:                3
[    0.080425] ... bit width:              48
[    0.080426] ... generic registers:      4
[    0.080427] ... value mask:             0000ffffffffffff
[    0.080427] ... max period:             00007fffffffffff
[    0.080428] ... fixed-purpose events:   3
[    0.080429] ... event mask:             000000070000000f
[    0.120704] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.160614] x86: Booting SMP configuration:
[    0.160618] .... node  #0, CPUs:      #1 #2 #3
[    0.227521] x86: Booted up 1 node, 4 CPUs
[    0.227524] smpboot: Total of 4 processors activated (18359.04 BogoMIPS)
[    0.230863] devtmpfs: initialized
[    0.230938] x86/mm: Memory block size: 128MB
[    0.233410] PM: Registering ACPI NVS region [mem 0xbcebf000-0xbcfbefff] (1048576 bytes)
[    0.233503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.233517] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.233571] pinctrl core: initialized pinctrl subsystem
[    0.233691] NET: Registered protocol family 16
[    0.242593] cpuidle: using governor ladder
[    0.258607] cpuidle: using governor menu
[    0.258668] Simple Boot Flag at 0x44 set to 0x1
[    0.258692] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.258695] ACPI: bus type PCI registered
[    0.258698] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.258795] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.258797] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.258802] PCI: Using configuration type 1 for base access
[    0.258843] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.259039] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.259040] mtrr: probably your BIOS does not setup all CPUs.
[    0.259040] mtrr: corrected configuration.
[    0.274836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.275091] ACPI: Added _OSI(Module Device)
[    0.275092] ACPI: Added _OSI(Processor Device)
[    0.275093] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.275094] ACPI: Added _OSI(Processor Aggregator Device)
[    0.275294] ACPI: Executed 1 blocks of module-level executable AML code
[    0.283596] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.284781] ACPI: Dynamic OEM Table Load:
[    0.284789] ACPI: SSDT 0xFFFF8A42BB0A8800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.285160] ACPI: Dynamic OEM Table Load:
[    0.285167] ACPI: SSDT 0xFFFF8A42BA7AE800 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.285432] ACPI: Dynamic OEM Table Load:
[    0.285438] ACPI: SSDT 0xFFFF8A42BA793C00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.286212] ACPI : EC: EC started
[    0.286213] ACPI : EC: interrupt blocked
[    0.289971] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.289973] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.289974] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.289975] ACPI: Interpreter enabled
[    0.289998] ACPI: (supports S0 S3 S4 S5)
[    0.289999] ACPI: Using IOAPIC for interrupt routing
[    0.290028] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.466691] ACPI: Power Resource [FN00] (off)
[    0.466800] ACPI: Power Resource [FN01] (off)
[    0.467490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.467494] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.467533] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.468048] PCI host bridge to bus 0000:00
[    0.468050] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.468052] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.468053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.468055] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.468057] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.468064] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.468171] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.468206] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.468258] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.468304] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.468314] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.468320] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.468324] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.468468] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.468490] pci 0000:00:16.0: reg 0x10: [mem 0xe1604000-0xe160400f 64bit]
[    0.468568] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.468668] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.468948] pci 0000:00:1a.0: reg 0x10: [mem 0xe1609000-0xe16093ff]
[    0.470541] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.470980] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.471031] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.471049] pci 0000:00:1b.0: reg 0x10: [mem 0xe1600000-0xe1603fff 64bit]
[    0.471126] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.471186] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.471232] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.471313] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.471371] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.471417] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.471496] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.471554] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.471608] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.471881] pci 0000:00:1d.0: reg 0x10: [mem 0xe1608000-0xe16083ff]
[    0.473474] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.473912] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.473963] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.474155] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.474170] pci 0000:00:1f.2: reg 0x10: [io  0x40b8-0x40bf]
[    0.474178] pci 0000:00:1f.2: reg 0x14: [io  0x40d4-0x40d7]
[    0.474186] pci 0000:00:1f.2: reg 0x18: [io  0x40b0-0x40b7]
[    0.474195] pci 0000:00:1f.2: reg 0x1c: [io  0x40d0-0x40d3]
[    0.474203] pci 0000:00:1f.2: reg 0x20: [io  0x4090-0x409f]
[    0.474211] pci 0000:00:1f.2: reg 0x24: [io  0x4080-0x408f]
[    0.474326] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.474343] pci 0000:00:1f.3: reg 0x10: [mem 0xe1606000-0xe16060ff 64bit]
[    0.474364] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.474473] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.474487] pci 0000:00:1f.5: reg 0x10: [io  0x40a8-0x40af]
[    0.474495] pci 0000:00:1f.5: reg 0x14: [io  0x40cc-0x40cf]
[    0.474504] pci 0000:00:1f.5: reg 0x18: [io  0x40a0-0x40a7]
[    0.474512] pci 0000:00:1f.5: reg 0x1c: [io  0x40c8-0x40cb]
[    0.474520] pci 0000:00:1f.5: reg 0x20: [io  0x4070-0x407f]
[    0.474528] pci 0000:00:1f.5: reg 0x24: [io  0x4060-0x406f]
[    0.474698] pci 0000:01:00.0: [1002:68e4] type 00 class 0x030000
[    0.474713] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.474723] pci 0000:01:00.0: reg 0x18: [mem 0xe0600000-0xe061ffff 64bit]
[    0.474729] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.474740] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.474779] pci 0000:01:00.0: supports D1 D2
[    0.474830] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.486856] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.486862] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.486868] pci 0000:00:01.0:   bridge window [mem 0xe0600000-0xe15fffff]
[    0.486876] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.487055] pci 0000:07:00.0: [1969:2062] type 00 class 0x020000
[    0.487174] pci 0000:07:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit]
[    0.487225] pci 0000:07:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.487691] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.487834] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.510910] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.510919] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.510927] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.511077] pci 0000:08:00.0: [14e4:4727] type 00 class 0x028000
[    0.511109] pci 0000:08:00.0: reg 0x10: [mem 0xe0400000-0xe0403fff 64bit]
[    0.511279] pci 0000:08:00.0: supports D1 D2
[    0.511280] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.511337] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.522932] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.522945] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.607585] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.607647] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.607706] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.607769] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.607828] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.607888] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.607951] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.608009] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.608181] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.609388] ACPI : EC: interrupt unblocked
[    0.609423] ACPI : EC: event unblocked
[    0.609430] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.609432] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.609613] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.609615] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.609619] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.609620] vgaarb: loaded
[    0.609620] vgaarb: bridge control possible 0000:01:00.0
[    0.609621] vgaarb: no bridge control possible 0000:00:02.0
[    0.609695] PCI: Using ACPI for IRQ routing
[    0.611287] PCI: pci_cache_line_size set to 64 bytes
[    0.611377] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.611378] e820: reserve RAM buffer [mem 0xbce3f000-0xbfffffff]
[    0.611380] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[    0.611381] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[    0.611554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.611560] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.614583] clocksource: Switched to clocksource hpet
[    0.621758] VFS: Disk quotas dquot_6.6.0
[    0.621791] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.621885] pnp: PnP ACPI init
[    0.622046] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.622048] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.622050] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.622051] system 00:00: [io  0xffff] has been reserved
[    0.622053] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.622055] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.622056] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.622058] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.622061] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.622092] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.622143] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.622146] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.702806] pnp 00:03: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active)
[    0.703027] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.703176] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.703178] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.703180] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.703181] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.703183] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.703185] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.703186] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.703188] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.703190] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.703192] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.703194] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.703485] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.703487] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.703489] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.703508] pnp: PnP ACPI: found 7 devices
[    0.710089] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.710094] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.710121] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0620000-0xe063ffff pref]
[    0.710123] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.710125] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.710128] pci 0000:00:01.0:   bridge window [mem 0xe0600000-0xe15fffff]
[    0.710130] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.710134] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.710137] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.710142] pci 0000:00:1c.0:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.710151] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.710156] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.710165] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.710167] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.710168] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.710170] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.710171] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.710172] pci_bus 0000:01: resource 1 [mem 0xe0600000-0xe15fffff]
[    0.710174] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.710175] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.710176] pci_bus 0000:07: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.710178] pci_bus 0000:08: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.710310] NET: Registered protocol family 2
[    0.710510] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.710595] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.710663] TCP: Hash tables configured (established 32768 bind 32768)
[    0.710684] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.710699] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.710762] NET: Registered protocol family 1
[    0.710778] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.750774] pci 0000:07:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.750817] PCI: CLS 64 bytes, default 64
[    0.750872] Unpacking initramfs...
[    1.463254] Freeing initrd memory: 42780K (ffff8a41b2c61000 - ffff8a41b5628000)
[    1.463258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.463260] software IO TLB [mem 0xb8e3f000-0xbce3f000] (64MB) mapped at [ffff8a4238e3f000-ffff8a423ce3efff]
[    1.463731] audit: initializing netlink subsys (disabled)
[    1.463751] audit: type=2000 audit(1508352039.448:1): initialized
[    1.464183] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.464226] zbud: loaded
[    1.465033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.465072] io scheduler noop registered
[    1.465073] io scheduler deadline registered
[    1.465086] io scheduler cfq registered (default)
[    1.465598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.465605] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.465619] intel_idle: MWAIT substates: 0x21120
[    1.465620] intel_idle: v0.4.1 model 0x2A
[    1.465797] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.466003] GHES: HEST is not enabled!
[    1.466066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.466531] Linux agpgart interface v0.103
[    1.466633] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.466634] AMD IOMMUv2 functionality not available on this system
[    1.467011] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.512484] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.512495] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.512654] mousedev: PS/2 mouse device common for all mice
[    1.512684] rtc_cmos 00:01: RTC can wake from S4
[    1.512866] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.512898] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.515214] ledtrig-cpu: registered to indicate activity on CPUs
[    1.515620] NET: Registered protocol family 10
[    1.515856] mip6: Mobile IPv6
[    1.515858] NET: Registered protocol family 17
[    1.515861] mpls_gso: MPLS GSO support
[    1.516061] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.516208] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.516422] registered taskstats version 1
[    1.516439] zswap: loaded using pool lzo/zbud
[    1.516532] ima: No TPM chip found, activating TPM-bypass!
[    1.516947] rtc_cmos 00:01: setting system clock to 2017-10-18 18:40:39 UTC (1508352039)
[    1.517018] PM: Hibernation image not present or could not be loaded.
[    1.518301] Freeing unused kernel memory: 1348K (ffffffff9551f000 - ffffffff95670000)
[    1.518303] Write protecting the kernel read-only data: 12288k
[    1.518842] Freeing unused kernel memory: 1912K (ffff8a42ad622000 - ffff8a42ad800000)
[    1.521895] Freeing unused kernel memory: 1232K (ffff8a42adacc000 - ffff8a42adc00000)
[    1.528152] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.562053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.567678] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[    1.567684] ACPI: Power Button [PWRB]
[    1.567760] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
[    1.567763] ACPI: Sleep Button [SLPB]
[    1.568055] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    1.568211] ACPI: Lid Switch [LID0]
[    1.568288] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.568291] ACPI: Power Button [PWRF]
[    1.587008] [drm] Initialized
[    1.587096] ACPI: bus type USB registered
[    1.587134] usbcore: registered new interface driver usbfs
[    1.587152] usbcore: registered new interface driver hub
[    1.587185] usbcore: registered new device driver usb
[    1.587885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.588232] ehci-pci: EHCI PCI platform driver
[    1.588769] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.588779] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.588797] ehci-pci 0000:00:1a.0: debug port 2
[    1.590604] SCSI subsystem initialized
[    1.592717] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.592741] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1609000
[    1.596687] libata version 3.00 loaded.
[    1.600338] thermal LNXTHERM:00: registered as thermal_zone0
[    1.600340] ACPI: Thermal Zone [TZ00] (0 C)
[    1.606581] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.606698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.606700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.606701] usb usb1: Product: EHCI Host Controller
[    1.606703] usb usb1: Manufacturer: Linux 4.9.0-deepin12-amd64 ehci_hcd
[    1.606704] usb usb1: SerialNumber: 0000:00:1a.0
[    1.606884] hub 1-0:1.0: USB hub found
[    1.606898] hub 1-0:1.0: 2 ports detected
[    1.607285] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.607290] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.607304] ehci-pci 0000:00:1d.0: debug port 2
[    1.611208] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.611230] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1608000
[    1.611964] [drm] radeon kernel modesetting enabled.
[    1.611985] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.612119] ATPX version 1, functions 0x00000183
[    1.615852] AVX version of gcm_enc/dec engaged.
[    1.615854] AES CTR mode by8 optimization enabled
[    1.618233] CRAT table not found
[    1.618234] Finished initializing topology ret=0
[    1.618254] kfd kfd: Initialized module
[    1.618517] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    1.618996] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E4 0x17AA:0x397A 0x00).
[    1.619012] [drm] register mmio base: 0xE0600000
[    1.619013] [drm] register mmio size: 131072
[    1.624606] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[    1.625855] atl1c 0000:07:00.0 enp7s0: renamed from eth0
[    1.626565] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.626652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.626654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.626656] usb usb2: Product: EHCI Host Controller
[    1.626658] usb usb2: Manufacturer: Linux 4.9.0-deepin12-amd64 ehci_hcd
[    1.626660] usb usb2: SerialNumber: 0000:00:1d.0
[    1.627666] hub 2-0:1.0: USB hub found
[    1.627680] hub 2-0:1.0: 2 ports detected
[    1.665878] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.667060] ATOM BIOS: Lenovo
[    1.667115] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    1.667117] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    1.667121] [drm] Detected VRAM RAM=512M, BAR=256M
[    1.667122] [drm] RAM width 64bits DDR
[    1.667179] [TTM] Zone  kernel: Available graphics memory: 1996232 kiB
[    1.667179] [TTM] Initializing pool allocator
[    1.667185] [TTM] Initializing DMA pool allocator
[    1.667207] [drm] radeon: 512M of VRAM memory ready
[    1.667207] [drm] radeon: 1024M of GTT memory ready.
[    1.667221] [drm] Loading CEDAR Microcode
[    1.667252] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[    1.667266] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[    1.667277] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[    1.667293] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[    1.667296] [drm] Internal thermal controller with fan control
[    1.669551] [drm] radeon: dpm initialized
[    1.669593] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[    1.669609] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.670327] [drm] PCIE gen 2 link speeds already enabled
[    1.672435] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    1.672537] radeon 0000:01:00.0: WB enabled
[    1.672540] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8a42b1acec00
[    1.672541] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8a42b1acec0c
[    1.672782] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffadcb80e1c418
[    1.672784] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.672784] [drm] Driver supports precise vblank timestamp query.
[    1.672786] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.672834] radeon 0000:01:00.0: radeon: using MSI.
[    1.672860] [drm] radeon: irq initialized.
[    1.689362] [drm] ring test on 0 succeeded in 1 usecs
[    1.689369] [drm] ring test on 3 succeeded in 3 usecs
[    1.751161] ata_piix 0000:00:1f.2: version 2.13
[    1.751302] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.875550] [drm] ring test on 5 succeeded in 2 usecs
[    1.875555] [drm] UVD initialized successfully.
[    1.875813] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.875842] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.911097] scsi host0: ata_piix
[    1.911315] scsi host1: ata_piix
[    1.911394] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40d4 bmdma 0x4090 irq 19
[    1.911400] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40d0 bmdma 0x4098 irq 19
[    1.911576] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.934551] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.962548] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.070539] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    2.070829] scsi host2: ata_piix
[    2.070948] scsi host3: ata_piix
[    2.070996] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40cc bmdma 0x4070 irq 21
[    2.070998] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c8 bmdma 0x4078 irq 21
[    2.071438] [drm] Memory usable by graphics device = 2048M
[    2.071440] [drm] Replacing VGA console driver
[    2.072007] Console: switching to colour dummy device 80x25
[    2.077309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.077310] [drm] Driver supports precise vblank timestamp query.
[    2.079368] vga_switcheroo: enabled
[    2.079803] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    2.079806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.083048] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.083050] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.083482] hub 1-1:1.0: USB hub found
[    2.083661] hub 1-1:1.0: 6 ports detected
[    2.084646] random: fast init done
[    2.115372] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.115379] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.115692] hub 2-1:1.0: USB hub found
[    2.115762] hub 2-1:1.0: 6 ports detected
[    2.370611] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    2.403922] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[    2.478557] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    2.478566] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[    2.480247] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
[    2.480249] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.480251] usb 1-1.4: Product: USB2.0-CRW
[    2.480252] usb 1-1.4: Manufacturer: Generic
[    2.480253] usb 1-1.4: SerialNumber: 20100201396000000
[    2.484813] usbcore: registered new interface driver rtsx_usb
[    2.516210] usb 2-1.1: New USB device found, idVendor=18f8, idProduct=0f99
[    2.516217] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.516221] usb 2-1.1: Product: USB OPTICAL MOUSE 
[    2.518499] hidraw: raw HID events driver (C) Jiri Kosina
[    2.525384] usbcore: registered new interface driver usbhid
[    2.525385] usbhid: USB HID core driver
[    2.526130] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:18F8:0F99.0001/input/input7
[    2.526219] hid-generic 0003:18F8:0F99.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.1/input0
[    2.526424] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:18F8:0F99.0002/input/input8
[    2.542782] [drm] ib test on ring 5 succeeded
[    2.543215] [drm] Radeon Display Connectors
[    2.573207] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[    2.574297] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.574785] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    2.578305] acpi LNXVIDEO:02: registered as cooling_device6
[    2.578371] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input9
[    2.582581] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582591] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582600] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582610] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582625] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582634] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582644] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.582868] hid-generic 0003:18F8:0F99.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.1/input1
[    2.583188] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.584722] acpi device:34: registered as cooling_device7
[    2.584829] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:0a/input/input10
[    2.584876] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 1
[    2.591837] fbcon: inteldrmfb (fb0) is primary device
[    2.594543] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.702686] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.702702] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.707887] ata1.00: ATA-8: WDC WD5000BPVT-24HXZT1, 02.01A02, max UDMA/133
[    2.707891] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.707905] ata1.01: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100
[    2.714026] ata1.00: configured for UDMA/133
[    2.718888] ata1.01: configured for UDMA/100
[    2.719879] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 1A02 PQ: 0 ANSI: 5
[    2.720516] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0292
[    2.720521] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.720524] usb 2-1.6: Product: Lenovo EasyCamera
[    2.720527] usb 2-1.6: Manufacturer: Bison Corp.
[    2.760771] scsi 0:0:1:0: CD-ROM            Optiarc  DVD RW AD-7710H  A833 PQ: 0 ANSI: 5
[    2.958666] ata2.00: failed to resume link (SControl 0)
[    3.213078] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    3.392137] Console: switching to colour frame buffer device 170x48
[    3.411457] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.415241] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    3.502828] clocksource: Switched to clocksource tsc
[    3.544001] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.998517] ata2.01: failed to resume link (SControl 0)
[    4.010026] ata2.00: SATA link down (SStatus 4 SControl 0)
[    4.010040] ata2.01: SATA link down (SStatus 4 SControl 0)
[    4.013247] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.013249] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.013310] sd 0:0:0:0: [sda] Write Protect is off
[    4.013314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.013341] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.024666] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.024669] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.024923] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.161748]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    4.192670] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.048249] md: linear personality registered for level -1
[    5.049757] md: multipath personality registered for level -4
[    5.051075] md: raid0 personality registered for level 0
[    5.052435] md: raid1 personality registered for level 1
[    5.118410] raid6: sse2x1   gen()  6123 MB/s
[    5.186415] raid6: sse2x1   xor()  4678 MB/s
[    5.254432] raid6: sse2x2   gen()  7588 MB/s
[    5.322394] raid6: sse2x2   xor()  5563 MB/s
[    5.390394] raid6: sse2x4   gen()  8895 MB/s
[    5.458386] raid6: sse2x4   xor()  6635 MB/s
[    5.458387] raid6: using algorithm sse2x4 gen() 8895 MB/s
[    5.458388] raid6: .... xor() 6635 MB/s, rmw enabled
[    5.458389] raid6: using ssse3x2 recovery algorithm
[    5.458713] xor: automatically using best checksumming function   avx       
[    5.458898] async_tx: api initialized (async)
[    5.464509] md: raid6 personality registered for level 6
[    5.464511] md: raid5 personality registered for level 5
[    5.464512] md: raid4 personality registered for level 4
[    5.468111] md: raid10 personality registered for level 10
[    6.152072] Btrfs loaded, crc32c=crc32c-intel
[    7.355101] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    7.826427] random: crng init done
[    9.517280] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    9.864921] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.980707] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    9.980851] systemd[1]: Detected architecture x86-64.
[    9.990778] systemd[1]: Set hostname to <bee-PC>.
[   12.037561] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.037651] systemd[1]: Listening on LVM2 poll daemon socket.
[   12.037698] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.037740] systemd[1]: Listening on Journal Socket.
[   12.037766] systemd[1]: Listening on LVM2 metadata daemon socket.
[   12.037846] systemd[1]: Listening on Journal Audit Socket.
[   12.038026] systemd[1]: Created slice System Slice.
[   13.135585] lp: driver loaded but no devices found
[   13.185224] ppdev: user-space parallel port driver
[   13.377288] bbswitch: loading out-of-tree module taints kernel.
[   13.377574] bbswitch: version 0.8
[   13.377579] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   13.377584] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   13.377597] bbswitch: failed to evaluate \_SB_.PCI0.PEG0.PEGP._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   13.377603] bbswitch: failed to evaluate \_SB_.PCI0.PEG0.PEGP._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   13.377611] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   13.377647] bbswitch: No suitable _DSM call found.
[   13.859816] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[   13.859848] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   13.859875] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   13.859927] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   13.872182] bcma: bus0: Bus registered
[   14.030021] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[   14.102165] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.172597] fuse init (API version 7.26)
[   14.844622] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[   15.212216] systemd-journald[280]: Received request to flush runtime journal from PID 1
[   15.596212] Adding 4194300k swap on /swapfile.  Priority:-1 extents:5 across:4931580k FS
[   15.835415] brcmsmac bcma0:1 wlp8s0b1: renamed from wlan0
[   16.221893] ACPI: AC Adapter [ACAD] (on-line)
[   16.358777] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   16.440498] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   16.440500] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   16.440501] RAPL PMU: hw unit of domain package 2^-16 Joules
[   16.440502] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   16.545661] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   16.545670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.545674] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   16.545680] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   16.545684] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.545686] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   16.545690] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   16.545695] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.545696] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   16.545701] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   16.545706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.545706] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.671239] wmi: Mapper loaded
[   16.702457] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.705971] ACPI: Battery Slot [BAT1] (battery absent)
[   16.810206] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input12
[   17.305826] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.305870] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   18.117059] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   18.117498] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   18.117499] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.117500] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   18.117501] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   18.117502] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   18.117504] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   18.117505] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[   18.118587] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   18.230701] [drm] PCIE gen 2 link speeds already enabled
[   18.233441] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   18.233524] radeon 0000:01:00.0: WB enabled
[   18.233527] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8a42b1acec00
[   18.233528] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8a42b1acec0c
[   18.233776] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffadcb80e1c418
[   18.250023] [drm] ring test on 0 succeeded in 1 usecs
[   18.250029] [drm] ring test on 3 succeeded in 3 usecs
[   18.426444] [drm] ring test on 5 succeeded in 2 usecs
[   18.426449] [drm] UVD initialized successfully.
[   18.426485] [drm] ib test on ring 0 succeeded in 0 usecs
[   18.426521] [drm] ib test on ring 3 succeeded in 0 usecs
[   18.514156] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   18.988031] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.989196] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   18.989253] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   18.989309] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   19.059267] media: Linux media interface: v0.10
[   19.117930] [drm] ib test on ring 5 succeeded
[   19.122494] Linux video capture interface: v2.00
[   19.390447] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292)
[   19.392121] uvcvideo 2-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   19.392124] uvcvideo 2-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   19.392125] uvcvideo 2-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[   19.392198] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input17
[   19.392250] usbcore: registered new interface driver uvcvideo
[   19.392251] USB Video Class driver (1.1.1)
[   20.873840] intel_rapl: Found RAPL domain package
[   20.873843] intel_rapl: Found RAPL domain core
[   20.873845] intel_rapl: Found RAPL domain uncore
[   20.873852] intel_rapl: RAPL package 0 domain package locked by BIOS
[   21.031022] iTCO_vendor_support: vendor-support=0
[   21.192191] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   21.192241] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   21.192384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   34.238274] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   34.260282] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   34.267021] IPv6: ADDRCONF(NETDEV_UP): wlp8s0b1: link is not ready
[   35.443183] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[   35.894016] [drm] PCIE gen 2 link speeds already enabled
[   35.896774] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   35.896858] radeon 0000:01:00.0: WB enabled
[   35.896860] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8a42b1acec00
[   35.896862] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8a42b1acec0c
[   35.897109] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffadcb80e1c418
[   35.913367] [drm] ring test on 0 succeeded in 1 usecs
[   35.913373] [drm] ring test on 3 succeeded in 3 usecs
[   36.090550] [drm] ring test on 5 succeeded in 2 usecs
[   36.090555] [drm] UVD initialized successfully.
[   36.090590] [drm] ib test on ring 0 succeeded in 0 usecs
[   36.090618] [drm] ib test on ring 3 succeeded in 0 usecs
[   36.553796] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[   36.725946] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   36.725995] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   36.726629] IPv6: ADDRCONF(NETDEV_UP): wlp8s0b1: link is not ready
[   36.749378] [drm] ib test on ring 5 succeeded
[   38.950591] IPv6: ADDRCONF(NETDEV_UP): wlp8s0b1: link is not ready
[   40.743072] wlp8s0b1: authenticate with 54:36:9b:0e:2c:06
[   40.748128] wlp8s0b1: send auth to 54:36:9b:0e:2c:06 (try 1/3)
[   40.751012] wlp8s0b1: authenticated
[   40.752974] wlp8s0b1: associate with 54:36:9b:0e:2c:06 (try 1/3)
[   40.756665] wlp8s0b1: RX AssocResp from 54:36:9b:0e:2c:06 (capab=0xc11 status=0 aid=3)
[   40.757399] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   40.757464] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   40.757526] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0b1: link becomes ready
[   40.757602] wlp8s0b1: associated
[   41.108012] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   41.113479] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   42.299062] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   52.227029] NET: Registered protocol family 15
[   53.258816] Initializing XFRM netlink socket
[  943.981338] Bluetooth: Core ver 2.22
[  943.981358] NET: Registered protocol family 31
[  943.981359] Bluetooth: HCI device and connection manager initialized
[  943.981364] Bluetooth: HCI socket layer initialized
[  943.981367] Bluetooth: L2CAP socket layer initialized
[  943.981374] Bluetooth: SCO socket layer initialized
