[    0.000000] microcode: microcode updated early to revision 0x20, date = 2016-03-16
[    0.000000] Linux version 4.9.0-deepin11-amd64 (yangbo@deepin.com) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP PREEMPT Deepin 4.9.40-2 (2017-08-12) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin11-amd64 root=UUID=f3f829ae-1a6c-49e8-85f8-0c5029a2d45d ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009550ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000095510000-0x0000000095e0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000095e10000-0x000000009cabefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Acer Aspire VN7-591G/Aspire VN7-591G, BIOS V1.13 01/08/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x35f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8e3a80097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13bd24000, 0x13bd24fff] PGTABLE
[    0.000000] BRK [0x13bd25000, 0x13bd25fff] PGTABLE
[    0.000000] BRK [0x13bd26000, 0x13bd26fff] PGTABLE
[    0.000000] BRK [0x13bd27000, 0x13bd27fff] PGTABLE
[    0.000000] BRK [0x13bd28000, 0x13bd28fff] PGTABLE
[    0.000000] BRK [0x13bd29000, 0x13bd29fff] PGTABLE
[    0.000000] BRK [0x13bd2a000, 0x13bd2afff] PGTABLE
[    0.000000] BRK [0x13bd2b000, 0x13bd2bfff] PGTABLE
[    0.000000] BRK [0x13bd2c000, 0x13bd2cfff] PGTABLE
[    0.000000] BRK [0x13bd2d000, 0x13bd2dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32c13000-0x35600fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE5000 00F6AC (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x000000009CFB9000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF9000 0000A0 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE3000 000833 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE1000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFDE000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFDD000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD5000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD0000 0034DD (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCB000 003E4B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFE4000 0000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000035f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x35f5fb000-0x35f5fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000035f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009550ffff]
[    0.000000]   node   0: [mem 0x0000000095e10000-0x000000009cabefff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000035f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000035f5fffff]
[    0.000000] On node 0 totalpages: 3127132
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9927 pages used for memmap
[    0.000000]   DMA32 zone: 635328 pages, LIFO batch:31
[    0.000000]   Normal zone: 38872 pages used for memmap
[    0.000000]   Normal zone: 2487808 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x95510000-0x95e0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8e3ddf200000 s103896 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s103896 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3078248
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin11-amd64 root=UUID=f3f829ae-1a6c-49e8-85f8-0c5029a2d45d ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12186192K/12508528K available (6264K kernel code, 1142K rwdata, 2864K rodata, 1348K init, 688K bss, 322336K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2893.246 MHz processor
[    0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.49 BogoMIPS (lpj=11572984)
[    0.000018] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20160831
[    0.009129] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.009165] Security Framework initialized
[    0.009166] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009169] AppArmor: AppArmor disabled by boot time parameter
[    0.009759] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.011892] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012808] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.012819] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013044] CPU: Physical Processor ID: 0
[    0.013044] CPU: Processor Core ID: 0
[    0.013047] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013048] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013050] mce: CPU supports 7 MCE banks
[    0.013057] CPU0: Thermal monitoring enabled (TM1)
[    0.013065] process: using mwait in idle threads
[    0.013067] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.013068] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.013792] Freeing SMP alternatives memory: 24K (ffffffff86a70000 - ffffffff86a76000)
[    0.014659] ftrace: allocating 25166 entries in 99 pages
[    0.021409] smpboot: Max logical packages: 4
[    0.021417] DMAR: Host address width 39
[    0.021418] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.021422] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.021423] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.021426] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.021426] DMAR: RMRR base: 0x0000009cde6000 end: 0x0000009ce05fff
[    0.021427] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[    0.021428] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.021429] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.021430] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.021647] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.021648] x2apic enabled
[    0.021653] Switched APIC routing to cluster x2apic.
[    0.022073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061762] TSC deadline timer enabled
[    0.061764] smpboot: CPU0: Intel(R) Core(TM) i5-4210H CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.061767] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.061794] ... version:                3
[    0.061794] ... bit width:              48
[    0.061794] ... generic registers:      4
[    0.061795] ... value mask:             0000ffffffffffff
[    0.061795] ... max period:             00007fffffffffff
[    0.061795] ... fixed-purpose events:   3
[    0.061796] ... event mask:             000000070000000f
[    0.102020] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.142025] x86: Booting SMP configuration:
[    0.142026] .... node  #0, CPUs:      #1 #2 #3
[    0.208556] x86: Booted up 1 node, 4 CPUs
[    0.208558] smpboot: Total of 4 processors activated (23145.96 BogoMIPS)
[    0.211247] devtmpfs: initialized
[    0.211294] x86/mm: Memory block size: 128MB
[    0.213161] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.213218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.213228] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.213265] pinctrl core: initialized pinctrl subsystem
[    0.213343] NET: Registered protocol family 16
[    0.227009] cpuidle: using governor ladder
[    0.243006] cpuidle: using governor menu
[    0.243022] Simple Boot Flag at 0x44 set to 0x1
[    0.243031] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.243032] ACPI: bus type PCI registered
[    0.243033] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.243089] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.243091] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.243094] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.243297] PCI: Using configuration type 1 for base access
[    0.243325] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.259111] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.259111] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.259292] ACPI: Added _OSI(Module Device)
[    0.259293] ACPI: Added _OSI(Processor Device)
[    0.259293] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.259294] ACPI: Added _OSI(Processor Aggregator Device)
[    0.259457] ACPI: Executed 1 blocks of module-level executable AML code
[    0.262292] ACPI Error: No handler for Region [RAM_] (ffff8e3dd28c3c60) [EmbeddedControl] (20160831/evregion-166)
[    0.262295] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[    0.262297] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8e3dd28c40c8), AE_NOT_EXIST (20160831/psparse-543)
[    0.262337] ACPI Error: No handler for Region [RAM_] (ffff8e3dd28c3c60) [EmbeddedControl] (20160831/evregion-166)
[    0.262338] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[    0.262340] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8e3dd28c40c8), AE_NOT_EXIST (20160831/psparse-543)
[    0.263016] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.264114] ACPI: Dynamic OEM Table Load:
[    0.264119] ACPI: SSDT 0xFFFF8E3DD05E9000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20131115)
[    0.264398] ACPI: Dynamic OEM Table Load:
[    0.264403] ACPI: SSDT 0xFFFF8E3DD0616000 0005AA (v01 PmRef  ApIst    00003000 INTL 20131115)
[    0.264697] ACPI: Dynamic OEM Table Load:
[    0.264701] ACPI: SSDT 0xFFFF8E3DD05E7000 000119 (v01 PmRef  ApCst    00003000 INTL 20131115)
[    0.265389] ACPI : EC: EC started
[    0.265389] ACPI : EC: interrupt blocked
[    0.266221] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.266222] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.266223] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.266223] ACPI: Interpreter enabled
[    0.266252] ACPI: (supports S0 S3 S4 S5)
[    0.266253] ACPI: Using IOAPIC for interrupt routing
[    0.266276] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.282960] ACPI: Power Resource [PG00] (on)
[    0.287108] ACPI: Power Resource [FN00] (off)
[    0.287164] ACPI: Power Resource [FN01] (off)
[    0.287218] ACPI: Power Resource [FN02] (off)
[    0.287272] ACPI: Power Resource [FN03] (off)
[    0.287326] ACPI: Power Resource [FN04] (off)
[    0.287957] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.287960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.288375] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.288376] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.288801] PCI host bridge to bus 0000:00
[    0.288802] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.288803] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.288804] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.288804] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.288805] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.288811] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.288933] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.288958] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.289075] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.289105] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.289111] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[    0.289115] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.289118] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.289245] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.289251] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[    0.289386] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.289400] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[    0.289451] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.289535] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.289563] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.289579] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[    0.289633] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.289748] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.290065] pci 0000:00:1a.0: reg 0x10: [mem 0xd171d000-0xd171d3ff]
[    0.291169] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.291266] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.291295] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.291309] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[    0.291367] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.291455] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.291482] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400
[    0.291537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.291649] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.291679] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.291734] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.291844] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.291876] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.292062] pci 0000:00:1d.0: reg 0x10: [mem 0xd171c000-0xd171c3ff]
[    0.293161] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.293258] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.293287] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.293483] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.293494] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.293500] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.293506] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.293512] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.293518] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.293524] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[    0.293554] pci 0000:00:1f.2: PME# supported from D3hot
[    0.293661] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.293673] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[    0.293690] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.293849] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
[    0.293865] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[    0.293880] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.293896] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.293906] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.293916] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.294007] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.303083] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.303084] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.303086] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd0ffffff]
[    0.303088] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.303156] pci 0000:07:00.0: [168c:0034] type 00 class 0x028000
[    0.303194] pci 0000:07:00.0: reg 0x10: [mem 0xd1600000-0xd167ffff 64bit]
[    0.303275] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.303384] pci 0000:07:00.0: supports D1 D2
[    0.303384] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.303443] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.315098] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.315103] pci 0000:00:1c.0:   bridge window [mem 0xd1600000-0xd16fffff]
[    0.315164] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[    0.315182] pci 0000:08:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.315209] pci 0000:08:00.0: reg 0x18: [mem 0xd1500000-0xd1500fff 64bit]
[    0.315226] pci 0000:08:00.0: reg 0x20: [mem 0xd1400000-0xd1403fff 64bit pref]
[    0.315315] pci 0000:08:00.0: supports D1 D2
[    0.315315] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315358] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.327107] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.327110] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.327112] pci 0000:00:1c.3:   bridge window [mem 0xd1500000-0xd15fffff]
[    0.327116] pci 0000:00:1c.3:   bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[    0.327796] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.327838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.327878] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.327918] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.327957] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.327997] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.328037] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.328075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.328406] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.328444] ACPI : EC: interrupt unblocked
[    0.328449] ACPI : EC: event unblocked
[    0.328454] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.328455] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.328620] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.328621] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.328623] vgaarb: loaded
[    0.328624] vgaarb: bridge control possible 0000:00:02.0
[    0.328665] PCI: Using ACPI for IRQ routing
[    0.333858] PCI: pci_cache_line_size set to 64 bytes
[    0.333898] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.333899] e820: reserve RAM buffer [mem 0x95510000-0x97ffffff]
[    0.333899] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
[    0.333900] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.333901] e820: reserve RAM buffer [mem 0x35f600000-0x35fffffff]
[    0.334009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.334012] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.336030] clocksource: Switched to clocksource hpet
[    0.340955] VFS: Disk quotas dquot_6.6.0
[    0.340976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.341037] pnp: PnP ACPI init
[    0.341142] system 00:00: [io  0xffff] has been reserved
[    0.341143] system 00:00: [io  0xffff] has been reserved
[    0.341144] system 00:00: [io  0xffff] has been reserved
[    0.341145] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.341146] system 00:00: [mem 0xfe802000-0xfe811fff] has been reserved
[    0.341148] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341182] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.341184] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341201] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.341236] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.341238] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.341283] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.341383] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.341384] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.341385] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.341386] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.341388] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.341389] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.341390] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.341391] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.341392] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.341392] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[    0.341393] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.341394] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341796] pnp: PnP ACPI: found 6 devices
[    0.347669] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.347672] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.347673] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.347691] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    0.347693] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.347694] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.347696] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd0ffffff]
[    0.347697] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.347700] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1680000-0xd168ffff pref]
[    0.347701] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.347704] pci 0000:00:1c.0:   bridge window [mem 0xd1600000-0xd16fffff]
[    0.347710] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.347713] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.347716] pci 0000:00:1c.3:   bridge window [mem 0xd1500000-0xd15fffff]
[    0.347719] pci 0000:00:1c.3:   bridge window [mem 0xd1400000-0xd14fffff 64bit pref]
[    0.347724] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.347725] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.347726] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.347726] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.347727] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.347728] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[    0.347728] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.347729] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
[    0.347731] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.347731] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
[    0.347732] pci_bus 0000:08: resource 2 [mem 0xd1400000-0xd14fffff 64bit pref]
[    0.347833] NET: Registered protocol family 2
[    0.347985] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.348124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.348224] TCP: Hash tables configured (established 131072 bind 65536)
[    0.348243] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.348277] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.348341] NET: Registered protocol family 1
[    0.348351] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.388144] PCI: CLS 64 bytes, default 64
[    0.388178] Unpacking initramfs...
[    0.830911] Freeing initrd memory: 42936K (ffff8e3ab2c13000 - ffff8e3ab5601000)
[    0.830946] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.830948] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff8e3b18abf000-ffff8e3b1cabefff]
[    0.831228] audit: initializing netlink subsys (disabled)
[    0.831240] audit: type=2000 audit(1505962976.828:1): initialized
[    0.831513] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.831542] zbud: loaded
[    0.832019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.832047] io scheduler noop registered
[    0.832047] io scheduler deadline registered
[    0.832056] io scheduler cfq registered (default)
[    0.832516] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.832517] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.832519] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    0.832531] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.832531] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    0.832534] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.832545] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.832546] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.832549] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.832555] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.832559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.832569] intel_idle: MWAIT substates: 0x42120
[    0.832570] intel_idle: v0.4.1 model 0x3C
[    0.832687] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.832847] GHES: HEST is not enabled!
[    0.832892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.833230] Linux agpgart interface v0.103
[    0.833289] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.833290] AMD IOMMUv2 functionality not available on this system
[    0.833521] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
[    0.833521] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.834623] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.834758] mousedev: PS/2 mouse device common for all mice
[    0.834787] rtc_cmos 00:02: RTC can wake from S4
[    0.834903] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.834928] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.834975] ledtrig-cpu: registered to indicate activity on CPUs
[    0.835143] NET: Registered protocol family 10
[    0.835300] mip6: Mobile IPv6
[    0.835301] NET: Registered protocol family 17
[    0.835303] mpls_gso: MPLS GSO support
[    0.835434] microcode: sig=0x306c3, pf=0x20, revision=0x20
[    0.835468] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.835553] registered taskstats version 1
[    0.835563] zswap: loaded using pool lzo/zbud
[    0.835634] ima: No TPM chip found, activating TPM-bypass!
[    0.836001] rtc_cmos 00:02: setting system clock to 2017-09-21 03:02:57 UTC (1505962977)
[    0.836049] PM: Hibernation image not present or could not be loaded.
[    0.836743] Freeing unused kernel memory: 1348K (ffffffff8691f000 - ffffffff86a70000)
[    0.836744] Write protecting the kernel read-only data: 12288k
[    0.837028] Freeing unused kernel memory: 1912K (ffff8e3bbb422000 - ffff8e3bbb600000)
[    0.838853] Freeing unused kernel memory: 1232K (ffff8e3bbb8cc000 - ffff8e3bbba00000)
[    0.842219] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.851454] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.851512] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.851518] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.851525] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.851989] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.852008] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.853080] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.853090] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.853288] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.853324] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.855898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.868830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.868834] ACPI: Power Button [PWRB]
[    0.868967] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.868998] ACPI: Lid Switch [LID0]
[    0.869047] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    0.869049] ACPI: Sleep Button [SLPB]
[    0.869096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    0.869098] ACPI: Power Button [PWRF]
[    0.870945] wmi: Mapper loaded
[    0.879107] [drm] Initialized
[    0.879163] ACPI: bus type USB registered
[    0.879184] usbcore: registered new interface driver usbfs
[    0.879196] usbcore: registered new interface driver hub
[    0.879226] usbcore: registered new device driver usb
[    0.879773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.880008] ehci-pci: EHCI PCI platform driver
[    0.881038] SCSI subsystem initialized
[    0.881942] thermal LNXTHERM:00: registered as thermal_zone0
[    0.881944] ACPI: Thermal Zone [TZ00] (28 C)
[    0.882181] thermal LNXTHERM:01: registered as thermal_zone1
[    0.882182] ACPI: Thermal Zone [TZ01] (30 C)
[    0.882642] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.882648] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.882660] ehci-pci 0000:00:1a.0: debug port 2
[    0.883828] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.883834] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.884180] thermal LNXTHERM:02: registered as thermal_zone2
[    0.884181] ACPI: Thermal Zone [TZS0] (62 C)
[    0.884317] thermal LNXTHERM:03: registered as thermal_zone3
[    0.884318] ACPI: Thermal Zone [TZS1] (53 C)
[    0.886555] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.886581] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd171d000
[    0.886610] libata version 3.00 loaded.
[    0.889134] AVX2 version of gcm_enc/dec engaged.
[    0.889135] AES CTR mode by8 optimization enabled
[    0.896987] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffa64001969000, 30:65:ec:80:d8:8a, XID 0c000800 IRQ 29
[    0.896990] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.900057] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.900150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.900151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.900152] usb usb1: Product: EHCI Host Controller
[    0.900153] usb usb1: Manufacturer: Linux 4.9.0-deepin11-amd64 ehci_hcd
[    0.900153] usb usb1: SerialNumber: 0000:00:1a.0
[    0.900267] hub 1-0:1.0: USB hub found
[    0.900275] hub 1-0:1.0: 2 ports detected
[    0.900560] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.900565] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.900576] ehci-pci 0000:00:1d.0: debug port 2
[    0.902260] r8169 0000:08:00.0 enp8s0: renamed from eth0
[    0.904466] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.904480] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd171c000
[    0.920107] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.920161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.920162] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.920163] usb usb2: Product: EHCI Host Controller
[    0.920164] usb usb2: Manufacturer: Linux 4.9.0-deepin11-amd64 ehci_hcd
[    0.920164] usb usb2: SerialNumber: 0000:00:1d.0
[    0.920288] hub 2-0:1.0: USB hub found
[    0.920292] hub 2-0:1.0: 2 ports detected
[    0.920545] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.920549] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.921633] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.921638] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.922038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.922039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.922040] usb usb3: Product: xHCI Host Controller
[    0.922040] usb usb3: Manufacturer: Linux 4.9.0-deepin11-amd64 xhci-hcd
[    0.922041] usb usb3: SerialNumber: 0000:00:14.0
[    0.922136] hub 3-0:1.0: USB hub found
[    0.922160] hub 3-0:1.0: 14 ports detected
[    0.924499] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.924502] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.924528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.924529] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.924530] usb usb4: Product: xHCI Host Controller
[    0.924530] usb usb4: Manufacturer: Linux 4.9.0-deepin11-amd64 xhci-hcd
[    0.924531] usb usb4: SerialNumber: 0000:00:14.0
[    0.924607] hub 4-0:1.0: USB hub found
[    0.924616] hub 4-0:1.0: 4 ports detected
[    0.925397] [drm] Memory usable by graphics device = 2048M
[    0.925398] [drm] Replacing VGA console driver
[    0.925969] Console: switching to colour dummy device 80x25
[    0.932166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.932167] [drm] Driver supports precise vblank timestamp query.
[    0.934508] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.959647] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    0.960016] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    0.960020] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    0.960024] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8e3dd28f0b40), AE_NOT_FOUND (20160831/psparse-543)
[    0.960191] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:00/input/input5
[    0.962001] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.962106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    0.962143] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    0.962165] ahci 0000:00:1f.2: version 3.0
[    0.962345] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.962365] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x20 impl SATA mode
[    0.962367] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    0.963043] scsi host0: ahci
[    0.963232] scsi host1: ahci
[    0.963309] scsi host2: ahci
[    0.963386] scsi host3: ahci
[    0.963462] scsi host4: ahci
[    0.963543] scsi host5: ahci
[    0.963588] ata1: DUMMY
[    0.963589] ata2: DUMMY
[    0.963589] ata3: DUMMY
[    0.963590] ata4: DUMMY
[    0.963591] ata5: DUMMY
[    0.963593] ata6: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b380 irq 32
[    0.963690] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.963711] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.964356] fbcon: inteldrmfb (fb0) is primary device
[    1.228125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.252097] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.252098] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.376506] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.376507] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.376654] hub 1-1:1.0: USB hub found
[    1.376759] hub 1-1:1.0: 6 ports detected
[    1.394702] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.394703] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.394704] usb 3-1: Product: USB Receiver
[    1.394705] usb 3-1: Manufacturer: Logitech
[    1.396610] hidraw: raw HID events driver (C) Jiri Kosina
[    1.398671] usbcore: registered new interface driver usbhid
[    1.398671] usbhid: USB HID core driver
[    1.399120] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C52F.0001/input/input7
[    1.399190] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[    1.399868] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C52F.0002/input/input8
[    1.400378] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.400379] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.400526] hub 2-1:1.0: USB hub found
[    1.400626] hub 2-1:1.0: 8 ports detected
[    1.456277] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[    1.512131] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    1.652554] usb 3-4: New USB device found, idVendor=0bda, idProduct=0129
[    1.652556] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.652556] usb 3-4: Product: USB2.0-CRW
[    1.652557] usb 3-4: Manufacturer: Generic
[    1.652558] usb 3-4: SerialNumber: 20100201396000000
[    1.655443] usbcore: registered new interface driver rtsx_usb
[    1.772138] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[    1.852135] tsc: Refined TSC clocksource calibration: 2893.299 MHz
[    1.852141] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4889c8c0, max_idle_ns: 440795211360 ns
[    1.913854] usb 3-7: New USB device found, idVendor=06cb, idProduct=2970
[    1.913855] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.913856] usb 3-7: Product:  
[    1.913856] usb 3-7: Manufacturer:  
[    2.057586] Console: switching to colour frame buffer device 240x67
[    2.077479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.156150] usb 3-9: new high-speed USB device number 5 using xhci_hcd
[    2.305127] usb 3-9: New USB device found, idVendor=04f2, idProduct=b469
[    2.305129] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.305130] usb 3-9: Product: HD WebCam
[    2.305131] usb 3-9: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.415718] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.417294] ata6.00: supports DRM functions and may not be fully accessible
[    2.417784] ata6.00: NCQ Send/Recv Log not supported
[    2.417786] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[    2.417788] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.418351] ata6.00: supports DRM functions and may not be fully accessible
[    2.418740] ata6.00: NCQ Send/Recv Log not supported
[    2.418988] ata6.00: configured for UDMA/133
[    2.419254] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    2.424147] usb 3-10: new full-speed USB device number 6 using xhci_hcd
[    2.450297] sd 5:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.450375] sd 5:0:0:0: [sda] Write Protect is off
[    2.450377] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.450395] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.450832]  sda: sda1
[    2.451053] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.467967] md: linear personality registered for level -1
[    2.469000] md: multipath personality registered for level -4
[    2.469887] md: raid0 personality registered for level 0
[    2.470863] md: raid1 personality registered for level 1
[    2.540103] raid6: sse2x1   gen() 11046 MB/s
[    2.564838] usb 3-10: New USB device found, idVendor=04ca, idProduct=300d
[    2.564840] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.608095] raid6: sse2x1   xor()  8258 MB/s
[    2.676076] raid6: sse2x2   gen() 14151 MB/s
[    2.744077] raid6: sse2x2   xor()  9513 MB/s
[    2.812096] raid6: sse2x4   gen() 16220 MB/s
[    2.880091] raid6: sse2x4   xor() 11113 MB/s
[    2.880094] clocksource: Switched to clocksource tsc
[    2.948079] raid6: avx2x1   gen() 21617 MB/s
[    3.016081] raid6: avx2x2   gen() 25152 MB/s
[    3.084081] raid6: avx2x4   gen() 28904 MB/s
[    3.084081] raid6: using algorithm avx2x4 gen() 28904 MB/s
[    3.084082] raid6: using avx2x2 recovery algorithm
[    3.084284] xor: automatically using best checksumming function   avx       
[    3.084433] async_tx: api initialized (async)
[    3.085504] md: raid6 personality registered for level 6
[    3.085505] md: raid5 personality registered for level 5
[    3.085506] md: raid4 personality registered for level 4
[    3.087975] md: raid10 personality registered for level 10
[    3.091268] random: fast init done
[    3.445277] Btrfs loaded, crc32c=crc32c-intel
[    3.512618] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.587762] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.591047] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    3.591142] systemd[1]: Detected architecture x86-64.
[    3.591268] systemd[1]: Set hostname to <AnonySec>.
[    3.642592] systemd[1]: Reached target Remote File Systems.
[    3.642669] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.642687] systemd[1]: Listening on udev Kernel Socket.
[    3.642705] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.642721] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.643221] systemd[1]: Created slice System Slice.
[    3.643718] systemd[1]: Mounting Huge Pages File System...
[    3.658955] lp: driver loaded but no devices found
[    3.660742] ppdev: user-space parallel port driver
[    3.663724] bbswitch: loading out-of-tree module taints kernel.
[    3.663892] bbswitch: version 0.8
[    3.663896] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    3.663900] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    3.663912] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    3.663988] bbswitch: detected an Optimus _DSM function
[    3.663999] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    3.664049] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    3.698278] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    3.709885] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    3.809978] ACPI: AC Adapter [ADP1] (on-line)
[    3.813745] ACPI: Battery Slot [BAT0] (battery present)
[    3.819671] Adding 4194300k swap on /swapfile.  Priority:-1 extents:9 across:4505596k SSFS
[    3.841282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.842423] EDAC MC: Ver: 3.0.0
[    3.843718] EDAC ie31200: No ECC support
[    3.846077] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    3.859614] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.873836] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.873839] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.873840] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.873841] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.873842] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.873844] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x12
[    3.887211] input:     Touchpad as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:06CB:2970.0003/input/input10
[    3.887318] hid-multitouch 0003:06CB:2970.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [   ] on usb-0000:00:14.0-7/input0
[    3.891004] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.891073] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.891133] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.893560] sd 5:0:0:0: Attached scsi generic sg0 type 0
[    3.896974] media: Linux media interface: v0.10
[    3.902208] Linux video capture interface: v2.00
[    3.905490] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.905492] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.905493] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.905493] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.905494] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.910104] Bluetooth: Core ver 2.22
[    3.910115] NET: Registered protocol family 31
[    3.910115] Bluetooth: HCI device and connection manager initialized
[    3.910119] Bluetooth: HCI socket layer initialized
[    3.910121] Bluetooth: L2CAP socket layer initialized
[    3.910126] Bluetooth: SCO socket layer initialized
[    3.914518] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
[    3.915304] usbcore: registered new interface driver btusb
[    3.915875] usbcore: registered new interface driver ath3k
[    3.923890] uvcvideo 3-9:1.0: Entity type for entity Extension 4 was not initialized!
[    3.923893] uvcvideo 3-9:1.0: Entity type for entity Extension 3 was not initialized!
[    3.923895] uvcvideo 3-9:1.0: Entity type for entity Processing 2 was not initialized!
[    3.923897] uvcvideo 3-9:1.0: Entity type for entity Camera 1 was not initialized!
[    3.924008] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input16
[    3.924093] usbcore: registered new interface driver uvcvideo
[    3.924094] USB Video Class driver (1.1.1)
[    3.925382] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    3.938828] ath: phy0: ASPM enabled: 0x43
[    3.938830] ath: EEPROM regdomain: 0x6a
[    3.938831] ath: EEPROM indicates we should expect a direct regpair map
[    3.938832] ath: Country alpha2 being used: 00
[    3.938833] ath: Regpair used: 0x6a
[    3.952075] acer_wmi: Acer Laptop ACPI-WMI Extras
[    3.952086] acer_wmi: Function bitmap for Communication Button: 0x801
[    3.953220] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.953673] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffa64002680000, irq=18
[    3.964401] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[    3.964461] input: Acer WMI hotkeys as /devices/virtual/input/input17
[    3.964808] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[    3.966675] intel_rapl: Found RAPL domain package
[    3.966676] intel_rapl: Found RAPL domain core
[    3.966677] intel_rapl: Found RAPL domain uncore
[    3.966678] intel_rapl: Found RAPL domain dram
[    3.966681] intel_rapl: RAPL package 0 domain package locked by BIOS
[    3.972239] iTCO_vendor_support: vendor-support=0
[    3.973576] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.973623] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    3.973707] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.000345] bbswitch: disabling discrete graphics
[    4.000358] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    4.002805] wl: module license 'MIXED/Proprietary' taints kernel.
[    4.002806] Disabling lock debugging due to kernel taint
[    4.034235] ath9k 0000:07:00.0 wlp7s0: renamed from wlan0
[    4.144435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.144437] Bluetooth: BNEP filters: protocol multicast
[    4.144441] Bluetooth: BNEP socket layer initialized
[    4.217217] NET: Registered protocol family 15
[    4.248877] Initializing XFRM netlink socket
[    4.483128] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    4.484368] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[    4.530758] r8169 0000:08:00.0 enp8s0: link down
[    4.530823] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    4.536092] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[    4.547895] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[    4.641190] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[    9.712566] fuse init (API version 7.26)
[   10.804253] Bluetooth: RFCOMM TTY layer initialized
[   10.804260] Bluetooth: RFCOMM socket layer initialized
[   10.804266] Bluetooth: RFCOMM ver 1.11
[   11.745940] wlp7s0: authenticate with b4:e9:b0:a7:db:2f
[   11.763865] wlp7s0: send auth to b4:e9:b0:a7:db:2f (try 1/3)
[   11.765327] wlp7s0: authenticated
[   11.768257] wlp7s0: associate with b4:e9:b0:a7:db:2f (try 1/3)
[   11.776273] wlp7s0: RX AssocResp from b4:e9:b0:a7:db:2f (capab=0x11 status=0 aid=7)
[   11.776405] wlp7s0: associated
[   11.776446] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[   11.782759] ath: EEPROM regdomain: 0x809c
[   11.782760] ath: EEPROM indicates we should expect a country code
[   11.782761] ath: doing EEPROM country->regdmn map search
[   11.782762] ath: country maps to regdmn code: 0x52
[   11.782763] ath: Country alpha2 being used: CN
[   11.782764] ath: Regpair used: 0x52
[   11.782765] ath: regdomain 0x809c dynamically updated by country IE
[   11.849897] wlp7s0: Limiting TX power to 7 dBm as advertised by b4:e9:b0:a7:db:2f
[   12.001694] /dev/vmmon[1396]: Module vmmon: registered with major=10 minor=165
[   12.001697] /dev/vmmon[1396]: Using tsc_khz as TSC frequency: 2893299
[   12.001698] /dev/vmmon[1396]: Module vmmon: initialized
[   12.035437] Guest personality initialized and is inactive
[   12.036862] VMCI host device registered (name=vmci, major=10, minor=57)
[   12.036864] Initialized host personality
[   12.116465] NET: Registered protocol family 40
[   12.397466] /dev/vmnet: open called by PID 1564 (vmnet-bridge)
[   12.397472] /dev/vmnet: hub 0 does not exist, allocating memory.
[   12.397487] /dev/vmnet: port on hub 0 successfully opened
[   12.397493] bridge-wlp7s0: device is wireless, enabling SMAC
[   12.397495] bridge-wlp7s0: up
[   12.397498] bridge-wlp7s0: attached
[   13.277046] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.277994] Bridge firewalling registered
[   13.281839] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   13.357113] Netfilter messages via NETLINK v0.30.
[   13.357973] ctnetlink v0.93: registering with nfnetlink.
[   13.420259] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   13.434259] /dev/vmnet: open called by PID 1716 (vmnet-netifup)
[   13.434266] /dev/vmnet: hub 1 does not exist, allocating memory.
[   13.434282] /dev/vmnet: port on hub 1 successfully opened
[   13.452715] /dev/vmnet: open called by PID 1721 (vmnet-dhcpd)
[   13.452725] /dev/vmnet: port on hub 1 successfully opened
[   13.465236] /dev/vmnet: open called by PID 1736 (vmnet-natd)
[   13.465245] /dev/vmnet: hub 8 does not exist, allocating memory.
[   13.465262] /dev/vmnet: port on hub 8 successfully opened
[   13.468057] userif-3: sent link down event.
[   13.468059] userif-3: sent link up event.
[   13.470522] /dev/vmnet: open called by PID 1739 (vmnet-netifup)
[   13.470536] /dev/vmnet: port on hub 8 successfully opened
[   13.484028] /dev/vmnet: open called by PID 1747 (vmnet-dhcpd)
[   13.484039] /dev/vmnet: port on hub 8 successfully opened
[   14.794273] random: crng init done
[   45.102362] userif-3: sent link down event.
[   45.102366] userif-3: sent link up event.
[   45.313107] bridge-wlp7s0: disabling the bridge on dev down
[   45.313126] bridge-wlp7s0: down
[   45.313131] bridge-wlp7s0: detached
[   45.313150] /dev/vmnet: open called by PID 1564 (vmnet-bridge)
[   45.313154] /dev/vmnet: hub 0 does not exist, allocating memory.
[   45.313169] /dev/vmnet: port on hub 0 successfully opened
[   45.313175] bridge-bnep0: up
[   45.313177] bridge-bnep0: attached
[   45.511725] userif-3: sent link down event.
[   45.511727] userif-3: sent link up event.
[   51.133322] Bluetooth: TIOCGSERIAL is not supported
[   57.844912] bridge-bnep0: disabling the bridge on dev down
[   57.844981] bridge-bnep0: down
[   57.846453] bridge-bnep0: detached
[   57.846495] /dev/vmnet: open called by PID 1564 (vmnet-bridge)
[   57.846503] /dev/vmnet: hub 0 does not exist, allocating memory.
[   57.846521] /dev/vmnet: port on hub 0 successfully opened
[   57.846530] bridge-wlp7s0: device is wireless, enabling SMAC
[   57.846533] bridge-wlp7s0: up
[   57.846536] bridge-wlp7s0: attached
[   58.043373] userif-3: sent link down event.
[   58.043378] userif-3: sent link up event.
[   63.004622] Bluetooth: TIOCGSERIAL is not supported
[   63.004777] Bluetooth: TIOCGSERIAL is not supported
[   69.012029] Bluetooth: TIOCGSERIAL is not supported
[  143.508850] r8169 0000:08:00.0: invalid short VPD tag 00 at offset 1
