[    2.221265] usb 4-1.2: Manufacturer: PixArt
[    2.223349] hidraw: raw HID events driver (C) Jiri Kosina
[    2.225837] usbcore: registered new interface driver usbhid
[    2.225837] usbhid: USB HID core driver
[    2.226403] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:0461:4D0F.0001/input/input8
[    2.226492] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.251649] ata2: SATA link down (SStatus 0 SControl 300)
[    2.288514] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    2.403713] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.403715] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.403716] usb 3-1.4: Product: Broadcom Bluetooth Device
[    2.403717] usb 3-1.4: Manufacturer: Broadcom Corp
[    2.403718] usb 3-1.4: SerialNumber: 60D819B9BBC4
[    2.440142] Console: switching to colour frame buffer device 170x48
[    2.459239] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.568198] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.568942] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.568955] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.568957] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.573991] ata3.00: ATA-8: SanDisk SD6SF1M128G1022, X230500, max UDMA/133
[    2.573993] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.575143] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.575149] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.575154] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.576706] ata3.00: configured for UDMA/133
[    2.577208] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD6SF1M1 500  PQ: 0 ANSI: 5
[    2.923927] ata5: SATA link down (SStatus 0 SControl 300)
[    2.927363] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.927367] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.927453] sd 0:0:0:0: [sda] Write Protect is off
[    2.927456] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.927488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.927574] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.927716] sd 2:0:0:0: [sdb] Write Protect is off
[    2.927720] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.927763] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.933700]  sdb: sdb1 sdb2 sdb3
[    2.933747] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.934256] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.993058]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.993690] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.016516] clocksource: Switched to clocksource tsc
[    3.193517] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    3.483880] md: linear personality registered for level -1
[    3.485488] md: multipath personality registered for level -4
[    3.486720] md: raid0 personality registered for level 0
[    3.488033] md: raid1 personality registered for level 1
[    3.556410] raid6: sse2x1   gen()  6678 MB/s
[    3.624396] raid6: sse2x1   xor()  5077 MB/s
[    3.692387] raid6: sse2x2   gen()  8303 MB/s
[    3.760382] raid6: sse2x2   xor()  6034 MB/s
[    3.828390] raid6: sse2x4   gen()  9661 MB/s
[    3.896384] raid6: sse2x4   xor()  7160 MB/s
[    3.896392] raid6: using algorithm sse2x4 gen() 9661 MB/s
[    3.896393] raid6: .... xor() 7160 MB/s, rmw enabled
[    3.896394] raid6: using ssse3x2 recovery algorithm
[    3.896679] xor: automatically using best checksumming function   avx       
[    3.896876] async_tx: api initialized (async)
[    3.898390] md: raid6 personality registered for level 6
[    3.898392] md: raid5 personality registered for level 5
[    3.898393] md: raid4 personality registered for level 4
[    3.901929] md: raid10 personality registered for level 10
[    4.180219] Btrfs loaded, crc32c=crc32c-intel
[    4.305751] PM: Starting manual resume from disk
[    4.305756] PM: Hibernation image partition 8:17 present
[    4.305756] PM: Looking for hibernation image.
[    4.306027] PM: Image not found (code -22)
[    4.306029] PM: Hibernation image not present or could not be loaded.
[    4.387066] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    4.588590] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.600380] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    4.600508] systemd[1]: Detected architecture x86-64.
[    4.600702] systemd[1]: Set hostname to <kevin-pc>.
[    4.722376] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.723195] systemd[1]: Created slice System Slice.
[    4.723257] systemd[1]: Listening on Journal Socket.
[    4.724049] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.725048] systemd[1]: Mounting Huge Pages File System...
[    4.725178] systemd[1]: Listening on Journal Audit Socket.
[    4.725257] systemd[1]: Listening on udev Kernel Socket.
[    4.759381] lp: driver loaded but no devices found
[    4.762868] ppdev: user-space parallel port driver
[    4.769368] bbswitch: loading out-of-tree module taints kernel.
[    4.769558] bbswitch: version 0.8
[    4.769562] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
[    4.769567] bbswitch: No discrete VGA device found
[    4.815842] livepatch: enabling patch 'block_sogou'
[    4.850217] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[    4.863570] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    4.966772] ACPI: Battery Slot [BAT0] (battery present)
[    4.967049] ACPI: AC Adapter [AC] (on-line)
[    4.996527] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.000661] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.001407] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    5.006242] Non-volatile memory driver v1.3
[    5.008536] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20160831/utaddress-247)
[    5.008544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.008547] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    5.008660] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.008662] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    5.008666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.008667] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    5.008670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.008671] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.020848] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.020850] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.020851] thinkpad_acpi: ThinkPad BIOS 8DET70WW (1.40 ), EC unknown
[    5.020852] thinkpad_acpi: Lenovo ThinkPad X220, model 429144U
[    5.022135] thinkpad_acpi: radio switch found; radios are enabled
[    5.022268] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    5.022334] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.022335] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.027762] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.030678] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.033252] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[    5.039452] Intel(R) Wireless WiFi driver for Linux
[    5.039456] Copyright(c) 2003- 2015 Intel Corporation
[    5.039712] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.042621] Bluetooth: Core ver 2.22
[    5.042636] NET: Registered protocol family 31
[    5.042637] Bluetooth: HCI device and connection manager initialized
[    5.042641] Bluetooth: HCI socket layer initialized
[    5.042644] Bluetooth: L2CAP socket layer initialized
[    5.042651] Bluetooth: SCO socket layer initialized
[    5.045260] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    5.052537] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    5.052802] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.059735] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.059738] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.059739] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.059739] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.068722] usbcore: registered new interface driver btusb
[    5.073690] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    5.074270] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    5.074272] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.074273] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    5.074274] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    5.074275] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    5.074277] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    5.074278] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    5.074280] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    5.075631] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    5.090351] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.091805] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    5.091807] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    5.091807] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    5.091809] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    5.093900] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    5.104515] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.104847] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.104914] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.105208] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.105278] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.105339] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.105481] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.106018] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.113882] wl: module license 'MIXED/Proprietary' taints kernel.
[    5.113885] Disabling lock debugging due to kernel taint
[    5.117518] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.164128] intel_rapl: Found RAPL domain package
[    5.164131] intel_rapl: Found RAPL domain core
[    5.164132] intel_rapl: Found RAPL domain uncore
[    5.164140] intel_rapl: RAPL package 0 domain package locked by BIOS
[    5.175787] iTCO_vendor_support: vendor-support=0
[    5.180923] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.180973] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    5.187484] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.190154] Adding 6291452k swap on /dev/sdb1.  Priority:-1 extents:1 across:6291452k SSFS
[    5.195957] fuse init (API version 7.26)
[    5.212198] bbswitch: version 0.8
[    5.212214] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
[    5.212230] bbswitch: No discrete VGA device found
[    5.282238] FAT-fs (sdb3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    5.287972] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.557164] random: crng init done
[    5.645393] Process accounting resumed
[    5.805115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.805117] Bluetooth: BNEP filters: protocol multicast
[    5.805122] Bluetooth: BNEP socket layer initialized
[    6.070510] NET: Registered protocol family 15
[    6.105326] Initializing XFRM netlink socket
[    6.372603] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.374841] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    6.375070] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    6.375159] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    6.654275] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    6.654518] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    6.654604] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    6.743857] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.750665] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.968863] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    7.185703] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   13.406869] Bluetooth: RFCOMM TTY layer initialized
[   13.406878] Bluetooth: RFCOMM socket layer initialized
[   13.406885] Bluetooth: RFCOMM ver 1.11
[   13.647832] wlp3s0: authenticate with 88:25:93:af:a0:b4
[   13.651409] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[   13.653521] wlp3s0: authenticated
[   13.656100] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[   13.662202] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=3)
[   13.688272] wlp3s0: associated
[   13.688334] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   14.926093] /dev/vmmon[1322]: Module vmmon: registered with major=10 minor=165
[   14.926097] /dev/vmmon[1322]: Using tsc_khz as TSC frequency: 2491905
[   14.926098] /dev/vmmon[1322]: Module vmmon: initialized
[   14.982790] Guest personality initialized and is inactive
[   14.983348] VMCI host device registered (name=vmci, major=10, minor=57)
[   14.983350] Initialized host personality
[   15.092887] NET: Registered protocol family 40
[   15.449127] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[   15.449135] /dev/vmnet: hub 0 does not exist, allocating memory.
[   15.449153] /dev/vmnet: port on hub 0 successfully opened
[   15.449163] bridge-wlp3s0: device is wireless, enabling SMAC
[   15.449165] bridge-wlp3s0: up
[   15.449169] bridge-wlp3s0: attached
[   16.484757] /dev/vmnet: open called by PID 1534 (vmnet-netifup)
[   16.484766] /dev/vmnet: hub 1 does not exist, allocating memory.
[   16.484783] /dev/vmnet: port on hub 1 successfully opened
[   16.547725] /dev/vmnet: open called by PID 1539 (vmnet-dhcpd)
[   16.547740] /dev/vmnet: port on hub 1 successfully opened
[   16.566757] /dev/vmnet: open called by PID 1556 (vmnet-natd)
[   16.566769] /dev/vmnet: hub 8 does not exist, allocating memory.
[   16.566789] /dev/vmnet: port on hub 8 successfully opened
[   16.569814] userif-3: sent link down event.
[   16.569817] userif-3: sent link up event.
[   16.571508] /dev/vmnet: open called by PID 1560 (vmnet-netifup)
[   16.571522] /dev/vmnet: port on hub 8 successfully opened
[   16.614044] /dev/vmnet: open called by PID 1563 (vmnet-dhcpd)
[   16.614059] /dev/vmnet: port on hub 8 successfully opened
[   16.991268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   16.995910] Bridge firewalling registered
[   17.004432] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   17.200721] Netfilter messages via NETLINK v0.30.
[   17.204982] ctnetlink v0.93: registering with nfnetlink.
[   17.304076] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   17.415540] userif-3: sent link down event.
[   17.415543] userif-3: sent link up event.
[  626.607812] docker0: port 1(veth3af3051) entered blocking state
[  626.607816] docker0: port 1(veth3af3051) entered disabled state
[  626.607918] device veth3af3051 entered promiscuous mode
[  626.608027] IPv6: ADDRCONF(NETDEV_UP): veth3af3051: link is not ready
[  626.608030] docker0: port 1(veth3af3051) entered blocking state
[  626.608033] docker0: port 1(veth3af3051) entered forwarding state
[  626.608404] docker0: port 1(veth3af3051) entered disabled state
[  626.810012] userif-3: sent link down event.
[  626.810018] userif-3: sent link up event.
[  626.834722] eth0: renamed from veth88e498c
[  626.857923] IPv6: ADDRCONF(NETDEV_CHANGE): veth3af3051: link becomes ready
[  626.858026] docker0: port 1(veth3af3051) entered blocking state
[  626.858028] docker0: port 1(veth3af3051) entered forwarding state
[  626.858213] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[  627.061994] userif-3: sent link down event.
[  627.061999] userif-3: sent link up event.
[ 2968.924348] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 4573.122072] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4833.157756] perf: interrupt took too long (3180 > 3136), lowering kernel.perf_event_max_sample_rate to 62750
[ 7367.412011] docker0: port 1(veth3af3051) entered disabled state
[ 7367.412421] veth88e498c: renamed from eth0
[ 7367.481909] docker0: port 1(veth3af3051) entered disabled state
[ 7367.487658] device veth3af3051 left promiscuous mode
[ 7367.487661] docker0: port 1(veth3af3051) entered disabled state
[ 7367.612283] userif-3: sent link down event.
[ 7367.612285] userif-3: sent link up event.
[ 7367.675679] docker0: port 1(vethb609e8a) entered blocking state
[ 7367.675682] docker0: port 1(vethb609e8a) entered disabled state
[ 7367.676277] device vethb609e8a entered promiscuous mode
[ 7367.677027] IPv6: ADDRCONF(NETDEV_UP): vethb609e8a: link is not ready
[ 7367.677032] docker0: port 1(vethb609e8a) entered blocking state
[ 7367.677034] docker0: port 1(vethb609e8a) entered forwarding state
[ 7367.876900] userif-3: sent link down event.
[ 7367.876903] userif-3: sent link up event.
[ 7367.945103] eth0: renamed from vetha2b6c2f
[ 7367.969025] IPv6: ADDRCONF(NETDEV_CHANGE): vethb609e8a: link becomes ready
[ 7400.383158] perf: interrupt took too long (3992 > 3975), lowering kernel.perf_event_max_sample_rate to 50000
[11584.517417] docker0: port 1(vethb609e8a) entered disabled state
[11584.517863] vetha2b6c2f: renamed from eth0
[11584.566489] docker0: port 1(vethb609e8a) entered disabled state
[11584.573891] device vethb609e8a left promiscuous mode
[11584.573895] docker0: port 1(vethb609e8a) entered disabled state
[11584.717626] userif-3: sent link down event.
[11584.717633] userif-3: sent link up event.
[11584.730645] docker0: port 1(veth4dccd05) entered blocking state
[11584.730649] docker0: port 1(veth4dccd05) entered disabled state
[11584.732424] device veth4dccd05 entered promiscuous mode
[11584.735148] IPv6: ADDRCONF(NETDEV_UP): veth4dccd05: link is not ready
[11584.735155] docker0: port 1(veth4dccd05) entered blocking state
[11584.735158] docker0: port 1(veth4dccd05) entered forwarding state
[11584.912910] eth0: renamed from veth320320c
[11584.931278] IPv6: ADDRCONF(NETDEV_CHANGE): veth4dccd05: link becomes ready
[11584.935422] userif-3: sent link down event.
[11584.935424] userif-3: sent link up event.
[13805.810582] wlp3s0: deauthenticating from 88:25:93:af:a0:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[13805.837966] bridge-wlp3s0: disabling the bridge
[13805.855127] bridge-wlp3s0: down
[13805.855134] bridge-wlp3s0: detached
[13805.855172] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[13805.855183] /dev/vmnet: hub 0 does not exist, allocating memory.
[13805.855199] /dev/vmnet: port on hub 0 successfully opened
[13805.855208] bridge-docker0: up
[13805.855214] bridge-docker0: attached
[13806.006410] userif-3: sent link down event.
[13806.006412] userif-3: sent link up event.
[14664.904055] perf: interrupt took too long (4997 > 4990), lowering kernel.perf_event_max_sample_rate to 40000
[15606.249497] wlp3s0: authenticate with 88:25:93:af:a0:b4
[15606.254020] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[15606.257080] wlp3s0: authenticated
[15606.260194] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[15606.265753] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=11)
[15606.287532] wlp3s0: associated
[15606.296114] bridge-docker0: disabling the bridge
[15606.324179] bridge-docker0: down
[15606.324185] bridge-docker0: detached
[15606.324232] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[15606.324243] /dev/vmnet: hub 0 does not exist, allocating memory.
[15606.324260] /dev/vmnet: port on hub 0 successfully opened
[15606.324271] bridge-wlp3s0: device is wireless, enabling SMAC
[15606.324274] bridge-wlp3s0: up
[15606.324280] bridge-wlp3s0: attached
[15606.496272] userif-3: sent link down event.
[15606.496275] userif-3: sent link up event.
[17754.827077] docker0: port 1(veth4dccd05) entered disabled state
[17754.827620] veth320320c: renamed from eth0
[17754.876544] docker0: port 1(veth4dccd05) entered disabled state
[17754.881193] device veth4dccd05 left promiscuous mode
[17754.881197] docker0: port 1(veth4dccd05) entered disabled state
[17755.027133] userif-3: sent link down event.
[17755.027137] userif-3: sent link up event.
[17756.047013] userif-3: sent link down event.
[17756.047016] userif-3: sent link up event.
[17802.750237] /dev/vmmon[11633]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[17802.945079] /dev/vmmon[11633]: Monitor IPI vector: ff
[17802.945082] /dev/vmmon[11633]: HV      IPI vector: f2
[17805.705000] /dev/vmnet: open called by PID 11697 (vmx-vcpu-0)
[17805.705048] /dev/vmnet: port on hub 0 successfully opened
[17805.705065] /dev/vmnet: open called by PID 11697 (vmx-vcpu-0)
[17805.705072] /dev/vmnet: port on hub 0 successfully opened
[19797.749212] thinkpad_acpi: EC reports that Thermal Table has changed
[23232.908835] thinkpad_acpi: EC reports that Thermal Table has changed
[23235.180697] thinkpad_acpi: EC reports that Thermal Table has changed
[23241.323647] thinkpad_acpi: EC reports that Thermal Table has changed
[28345.553098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[28904.998002] wlp3s0: deauthenticating from 88:25:93:af:a0:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[28905.020896] bridge-wlp3s0: disabling the bridge
[28905.042466] bridge-wlp3s0: down
[28905.042477] bridge-wlp3s0: detached
[28905.191788] userif-3: sent link down event.
[28905.191791] userif-3: sent link up event.
[28910.732988] PM: Syncing filesystems ... done.
[28910.858413] PM: Preparing system for sleep (mem)
[28910.863347] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[28910.863377] Freezing user space processes ... (elapsed 0.004 seconds) done.
[28910.867535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[28910.869088] PM: Suspending system (mem)
[28910.869115] Suspending console(s) (use no_console_suspend to debug)
[28910.869469] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[28910.879555] sd 2:0:0:0: [sdb] Stopping disk
[28911.038269] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[28911.045253] sd 0:0:0:0: [sda] Stopping disk
[28911.130404] e1000e: EEE TX LPI TIMER: 00000011
[28911.130558] ACPI : EC: event blocked
[28911.560788] PM: suspend of devices complete after 691.490 msecs
[28911.578253] PM: late suspend of devices complete after 17.459 msecs
[28911.578715] ACPI : EC: interrupt blocked
[28911.581303] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[28911.581561] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[28911.581684] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[28911.581690] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[28911.618057] PM: noirq suspend of devices complete after 39.802 msecs
[28911.618235] ACPI: Preparing to enter system sleep state S3
[28911.625888] ACPI : EC: EC stopped
[28911.625888] PM: Saving platform NVS memory
[28911.625900] Disabling non-boot CPUs ...
[28911.646236] Broke affinity for irq 16
[28911.646239] Broke affinity for irq 23
[28911.646242] Broke affinity for irq 29
[28911.646244] Broke affinity for irq 30
[28911.646246] Broke affinity for irq 31
[28911.646248] Broke affinity for irq 32
[28911.647445] smpboot: CPU 1 is now offline
[28911.678294] Broke affinity for irq 16
[28911.678301] Broke affinity for irq 23
[28911.678309] Broke affinity for irq 29
[28911.678311] Broke affinity for irq 30
[28911.678314] Broke affinity for irq 31
[28911.678317] Broke affinity for irq 32
[28911.678320] Broke affinity for irq 33
[28911.679344] smpboot: CPU 2 is now offline
[28911.702222] Broke affinity for irq 1
[28911.702225] Broke affinity for irq 8
[28911.702227] Broke affinity for irq 9
[28911.702230] Broke affinity for irq 12
[28911.702233] Broke affinity for irq 16
[28911.702236] Broke affinity for irq 18
[28911.702238] Broke affinity for irq 23
[28911.702242] Broke affinity for irq 27
[28911.702244] Broke affinity for irq 28
[28911.702246] Broke affinity for irq 29
[28911.702248] Broke affinity for irq 30
[28911.702250] Broke affinity for irq 31
[28911.702252] Broke affinity for irq 32
[28911.702255] Broke affinity for irq 33
[28911.702257] Broke affinity for irq 35
[28911.703274] smpboot: CPU 3 is now offline
[28911.707115] ACPI: Low-level resume complete
[28911.707217] ACPI : EC: EC started
[28911.707218] PM: Restoring platform NVS memory
[28911.707572] Suspended for 7490.977 seconds
[28911.707745] Enabling non-boot CPUs ...
[28911.709528] x86: Booting SMP configuration:
[28911.709531] smpboot: Booting Node 0 Processor 1 APIC 0x1
[28911.710339] Disabled fast string operations
[28911.712781]  cache: parent cpu1 should not be sleeping
[28911.717056] CPU1 is up
[28911.718596] smpboot: Booting Node 0 Processor 2 APIC 0x2
[28911.719331] Disabled fast string operations
[28911.721759]  cache: parent cpu2 should not be sleeping
[28911.725808] CPU2 is up
[28911.727335] smpboot: Booting Node 0 Processor 3 APIC 0x3
[28911.728067] Disabled fast string operations
[28911.730458]  cache: parent cpu3 should not be sleeping
[28911.734261] CPU3 is up
[28911.742437] ACPI: Waking up from system sleep state S3
[28911.752630] thinkpad_acpi: EC reports that Thermal Table has changed
[28911.762951] ACPI : EC: interrupt unblocked
[28911.809832] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[28911.812887] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[28911.812912] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[28911.812978] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[28911.813139] PM: noirq resume of devices complete after 50.616 msecs
[28911.814085] PM: early resume of devices complete after 0.890 msecs
[28911.814246] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[28911.814411] ACPI : EC: event unblocked
[28911.814752] usb usb1: root hub lost power or was reset
[28911.814757] usb usb2: root hub lost power or was reset
[28911.815248] sd 0:0:0:0: [sda] Starting disk
[28911.815254] sd 2:0:0:0: [sdb] Starting disk
[28911.818544] rtc_cmos 00:02: System wakeup disabled by ACPI
[28912.060864] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[28912.163489] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[28912.163525] ata2: SATA link down (SStatus 0 SControl 300)
[28912.163562] ata5: SATA link down (SStatus 0 SControl 300)
[28912.164124] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[28912.164129] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[28912.164133] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[28912.166221] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[28912.166227] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[28912.166231] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[28912.167595] ata3.00: configured for UDMA/133
[28912.252888] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[28912.340826] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445244074736189918 new 18445244067245212340 attempts 1
[28912.603344] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[28913.780831] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[28914.095478] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[28914.095486] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[28914.095491] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[28914.152812] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[28914.152821] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[28914.152828] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[28914.179363] ata1.00: configured for UDMA/133
[28914.787677] PM: resume of devices complete after 2973.671 msecs
[28914.787829] usb 3-1.4:1.0: rebind failed: -517
[28914.787836] usb 3-1.4:1.1: rebind failed: -517
[28914.788462] PM: Finishing wakeup.
[28914.788465] Restarting tasks ... 
[28914.788478] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[28914.788837] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
[28914.789109] usb 4-1.2: USB disconnect, device number 3
[28914.808221] done.
[28915.118690] e1000e: enp0s25 NIC Link is Down
[28915.125574] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28915.127732] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[28915.127978] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[28915.128075] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[28915.406811] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[28915.407056] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[28915.407153] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[28915.505196] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28915.506858] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[28915.724975] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[28915.803931] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28922.150658] wlp3s0: authenticate with c8:3a:35:55:50:90
[28922.155490] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[28922.157509] wlp3s0: authenticated
[28922.164514] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[28922.217049] wlp3s0: RX AssocResp from c8:3a:35:55:50:90 (capab=0x411 status=0 aid=3)
[28922.235870] wlp3s0: associated
[28922.235987] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[28922.321876] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[28922.321890] /dev/vmnet: port on hub 0 successfully opened
[28922.321899] bridge-wlp3s0: device is wireless, enabling SMAC
[28922.321904] bridge-wlp3s0: up
[28922.321908] bridge-wlp3s0: attached
[28922.521936] userif-3: sent link down event.
[28922.521939] userif-3: sent link up event.
[28923.782929] userif-3: sent link down event.
[28923.782933] userif-3: sent link up event.
[35065.149651] wlp3s0: deauthenticating from c8:3a:35:55:50:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[35065.173668] bridge-wlp3s0: disabling the bridge
[35065.209008] bridge-wlp3s0: down
[35065.209016] bridge-wlp3s0: detached
[35065.373695] userif-3: sent link down event.
[35065.373702] userif-3: sent link up event.
[35070.813184] PM: Syncing filesystems ... done.
[35070.886642] PM: Preparing system for sleep (mem)
[35070.887598] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[35070.887633] Freezing user space processes ... (elapsed 0.003 seconds) done.
[35070.890909] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[35070.892436] PM: Suspending system (mem)
[35070.892474] Suspending console(s) (use no_console_suspend to debug)
[35070.893280] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[35070.896738] sd 2:0:0:0: [sdb] Stopping disk
[35071.059719] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[35071.063420] sd 0:0:0:0: [sda] Stopping disk
[35071.146984] ACPI : EC: event blocked
[35071.147065] e1000e: EEE TX LPI TIMER: 00000011
[35071.391873] PM: suspend of devices complete after 499.106 msecs
[35071.409021] PM: late suspend of devices complete after 17.138 msecs
[35071.410297] ACPI : EC: interrupt blocked
[35071.412732] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[35071.412831] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[35071.412959] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[35071.413018] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[35071.448848] PM: noirq suspend of devices complete after 39.820 msecs
[35071.449518] ACPI: Preparing to enter system sleep state S3
[35071.457399] ACPI : EC: EC stopped
[35071.457400] PM: Saving platform NVS memory
[35071.457412] Disabling non-boot CPUs ...
[35071.481423] Broke affinity for irq 16
[35071.481434] Broke affinity for irq 29
[35071.481439] Broke affinity for irq 30
[35071.481444] Broke affinity for irq 31
[35071.481450] Broke affinity for irq 33
[35071.482484] smpboot: CPU 1 is now offline
[35071.509515] Broke affinity for irq 16
[35071.509541] Broke affinity for irq 29
[35071.509543] Broke affinity for irq 30
[35071.509545] Broke affinity for irq 31
[35071.509549] Broke affinity for irq 33
[35071.509551] Broke affinity for irq 35
[35071.510798] smpboot: CPU 2 is now offline
[35071.533084] Broke affinity for irq 1
[35071.533087] Broke affinity for irq 8
[35071.533088] Broke affinity for irq 9
[35071.533091] Broke affinity for irq 12
[35071.533093] Broke affinity for irq 16
[35071.533095] Broke affinity for irq 18
[35071.533098] Broke affinity for irq 23
[35071.533101] Broke affinity for irq 27
[35071.533102] Broke affinity for irq 28
[35071.533104] Broke affinity for irq 29
[35071.533106] Broke affinity for irq 30
[35071.533108] Broke affinity for irq 31
[35071.533110] Broke affinity for irq 32
[35071.533112] Broke affinity for irq 33
[35071.533114] Broke affinity for irq 35
[35071.534131] smpboot: CPU 3 is now offline
[35071.537649] ACPI: Low-level resume complete
[35071.537695] ACPI : EC: EC started
[35071.537695] PM: Restoring platform NVS memory
[35071.537985] Suspended for 42316.983 seconds
[35071.538047] Enabling non-boot CPUs ...
[35071.538714] x86: Booting SMP configuration:
[35071.538714] smpboot: Booting Node 0 Processor 1 APIC 0x1
[35071.538982] Disabled fast string operations
[35071.541143]  cache: parent cpu1 should not be sleeping
[35071.547281] CPU1 is up
[35071.547906] smpboot: Booting Node 0 Processor 2 APIC 0x2
[35071.548150] Disabled fast string operations
[35071.550313]  cache: parent cpu2 should not be sleeping
[35071.556371] CPU2 is up
[35071.556987] smpboot: Booting Node 0 Processor 3 APIC 0x3
[35071.557229] Disabled fast string operations
[35071.559397]  cache: parent cpu3 should not be sleeping
[35071.564931] CPU3 is up
[35071.567907] ACPI: Waking up from system sleep state S3
[35071.579890] thinkpad_acpi: EC reports that Thermal Table has changed
[35071.590247] ACPI : EC: interrupt unblocked
[35071.631266] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[35071.638673] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[35071.638701] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[35071.638734] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[35071.638776] PM: noirq resume of devices complete after 48.715 msecs
[35071.639071] PM: early resume of devices complete after 0.263 msecs
[35071.639136] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[35071.639169] ACPI : EC: event unblocked
[35071.639406] usb usb1: root hub lost power or was reset
[35071.639408] usb usb2: root hub lost power or was reset
[35071.641885] rtc_cmos 00:02: System wakeup disabled by ACPI
[35071.649465] sd 0:0:0:0: [sda] Starting disk
[35071.649466] sd 2:0:0:0: [sdb] Starting disk
[35071.886630] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[35071.997158] ata2: SATA link down (SStatus 0 SControl 300)
[35071.997257] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[35071.997395] ata5: SATA link down (SStatus 0 SControl 300)
[35071.998022] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[35071.998027] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[35071.998031] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[35072.000150] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[35072.000156] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[35072.000160] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[35072.001474] ata3.00: configured for UDMA/133
[35072.074646] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[35072.185555] PM: resume of devices complete after 546.497 msecs
[35072.185612] usb 3-1.4:1.0: rebind failed: -517
[35072.185613] usb 3-1.4:1.1: rebind failed: -517
[35072.185851] PM: Finishing wakeup.
[35072.185852] Restarting tasks ... done.
[35072.266602] usb 4-1.2: new low-speed USB device number 4 using ehci-pci
[35072.378810] usb 4-1.2: New USB device found, idVendor=0461, idProduct=4d0f
[35072.378813] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[35072.378814] usb 4-1.2: Product: USB Optical Mouse
[35072.378815] usb 4-1.2: Manufacturer: PixArt
[35072.381953] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:0461:4D0F.0002/input/input19
[35072.382097] hid-generic 0003:0461:4D0F.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[35072.454972] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[35072.538557] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445244067245212340 new 18445244024928228989 attempts 1
[35073.614551] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[35073.935788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[35073.935792] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[35073.935794] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[35073.992515] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[35073.992518] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[35073.992521] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[35074.018919] ata1.00: configured for UDMA/133
[35074.547308] e1000e: enp0s25 NIC Link is Down
[35074.551990] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35074.554194] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[35074.554442] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[35074.554569] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[35074.850548] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[35074.850831] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[35074.850928] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[35074.965525] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35074.971591] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[35075.235840] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[35075.334882] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35081.714056] wlp3s0: authenticate with 88:25:93:af:a0:b4
[35081.752748] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[35081.770143] wlp3s0: authenticated
[35081.774304] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[35081.799991] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=10)
[35081.862475] wlp3s0: associated
[35081.862721] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[35082.832931] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[35082.832954] /dev/vmnet: hub 0 does not exist, allocating memory.
[35082.832984] /dev/vmnet: port on hub 0 successfully opened
[35082.832999] bridge-wlp3s0: device is wireless, enabling SMAC
[35082.833003] bridge-wlp3s0: up
[35082.833008] bridge-wlp3s0: attached
[35083.033049] userif-3: sent link down event.
[35083.033051] userif-3: sent link up event.
[35923.268975] /dev/vmmon[25886]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[35979.879058] /dev/vmnet: open called by PID 26601 (vmx-vcpu-0)
[35979.879078] /dev/vmnet: port on hub 0 successfully opened
[35979.879088] /dev/vmnet: open called by PID 26601 (vmx-vcpu-0)
[35979.879094] /dev/vmnet: port on hub 0 successfully opened
[36119.959625] wlp3s0: disconnect from AP 88:25:93:af:a0:b4 for new auth to 88:25:93:af:9f:d2
[36119.978675] wlp3s0: authenticate with 88:25:93:af:9f:d2
[36119.982453] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[36119.983351] bridge-wlp3s0: disabling the bridge
[36119.984829] wlp3s0: authenticated
[36119.986601] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[36119.992713] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=28)
[36120.006607] bridge-wlp3s0: down
[36120.006618] bridge-wlp3s0: detached
[36120.020875] wlp3s0: associated
[36120.182611] userif-3: sent link down event.
[36120.182613] userif-3: sent link up event.
[36121.009245] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[36121.009285] /dev/vmnet: port on hub 0 successfully opened
[36121.009308] bridge-wlp3s0: device is wireless, enabling SMAC
[36121.009735] bridge-wlp3s0: up
[36121.009745] bridge-wlp3s0: attached
[36121.208619] userif-3: sent link down event.
[36121.208624] userif-3: sent link up event.
[37079.915946] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:a0:b4
[37079.935842] wlp3s0: authenticate with 88:25:93:af:a0:b4
[37079.939242] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[37079.939574] bridge-wlp3s0: disabling the bridge
[37079.948364] wlp3s0: authenticated
[37079.949302] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[37079.953877] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=18)
[37079.961307] bridge-wlp3s0: down
[37079.961330] bridge-wlp3s0: detached
[37079.979194] wlp3s0: associated
[37080.139594] userif-3: sent link down event.
[37080.139597] userif-3: sent link up event.
[37080.968104] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[37080.968133] /dev/vmnet: port on hub 0 successfully opened
[37080.968147] bridge-wlp3s0: device is wireless, enabling SMAC
[37080.968157] bridge-wlp3s0: up
[37080.968699] bridge-wlp3s0: attached
[37081.168288] userif-3: sent link down event.
[37081.168292] userif-3: sent link up event.
[51959.331747] wlp3s0: disconnect from AP 88:25:93:af:a0:b4 for new auth to 88:25:93:af:9f:d2
[51959.350319] wlp3s0: authenticate with 88:25:93:af:9f:d2
[51959.354684] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[51959.357319] bridge-wlp3s0: disabling the bridge
[51959.357349] bridge-wlp3s0: down
[51959.357356] bridge-wlp3s0: detached
[51959.357692] wlp3s0: authenticated
[51959.357858] wlp3s0: waiting for beacon from 88:25:93:af:9f:d2
[51959.363139] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[51959.368209] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=14)
[51959.394042] wlp3s0: associated
[51959.558676] userif-3: sent link down event.
[51959.558678] userif-3: sent link up event.
[51960.381872] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[51960.381901] /dev/vmnet: port on hub 0 successfully opened
[51960.381918] bridge-wlp3s0: device is wireless, enabling SMAC
[51960.381931] bridge-wlp3s0: up
[51960.382242] bridge-wlp3s0: attached
[51960.582281] userif-3: sent link down event.
[51960.582285] userif-3: sent link up event.
[55679.631837] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:a0:b4
[55679.650199] wlp3s0: authenticate with 88:25:93:af:a0:b4
[55679.653283] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[55679.655619] wlp3s0: authenticated
[55679.655700] bridge-wlp3s0: disabling the bridge
[55679.657606] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[55679.662205] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=1)
[55679.681600] bridge-wlp3s0: down
[55679.681610] bridge-wlp3s0: detached
[55679.687516] wlp3s0: associated
[55679.855723] userif-3: sent link down event.
[55679.855727] userif-3: sent link up event.
[55680.671504] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[55680.671526] /dev/vmnet: port on hub 0 successfully opened
[55680.671538] bridge-wlp3s0: device is wireless, enabling SMAC
[55680.671546] bridge-wlp3s0: up
[55680.671912] bridge-wlp3s0: attached
[55680.871703] userif-3: sent link down event.
[55680.871706] userif-3: sent link up event.
[56639.162405] wlp3s0: disconnect from AP 88:25:93:af:a0:b4 for new auth to 88:25:93:af:9f:d2
[56639.180379] wlp3s0: authenticate with 88:25:93:af:9f:d2
[56639.184205] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[56639.184431] bridge-wlp3s0: disabling the bridge
[56639.186336] wlp3s0: authenticated
[56639.188906] wlp3s0: waiting for beacon from 88:25:93:af:9f:d2
[56639.200306] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[56639.204726] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=14)
[56639.208384] bridge-wlp3s0: down
[56639.208392] bridge-wlp3s0: detached
[56639.227469] wlp3s0: associated
[56639.384382] userif-3: sent link down event.
[56639.384388] userif-3: sent link up event.
[56640.223647] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[56640.223673] /dev/vmnet: port on hub 0 successfully opened
[56640.223689] bridge-wlp3s0: device is wireless, enabling SMAC
[56640.223699] bridge-wlp3s0: up
[56640.223706] bridge-wlp3s0: attached
[56640.422374] userif-3: sent link down event.
[56640.422383] userif-3: sent link up event.
[57839.496591] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:a0:b4
[57839.515452] wlp3s0: authenticate with 88:25:93:af:a0:b4
[57839.518816] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[57839.519152] bridge-wlp3s0: disabling the bridge
[57839.521066] wlp3s0: authenticated
[57839.524455] wlp3s0: waiting for beacon from 88:25:93:af:a0:b4
[57839.535663] bridge-wlp3s0: down
[57839.535672] bridge-wlp3s0: detached
[57839.555676] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[57839.560075] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=10)
[57839.588820] wlp3s0: associated
[57839.719316] userif-3: sent link down event.
[57839.719321] userif-3: sent link up event.
[57840.574224] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[57840.574242] /dev/vmnet: port on hub 0 successfully opened
[57840.574252] bridge-wlp3s0: device is wireless, enabling SMAC
[57840.574259] bridge-wlp3s0: up
[57840.574263] bridge-wlp3s0: attached
[57840.774382] userif-3: sent link down event.
[57840.774384] userif-3: sent link up event.
[59639.371862] wlp3s0: disconnect from AP 88:25:93:af:a0:b4 for new auth to 88:25:93:af:9f:d2
[59639.397704] wlp3s0: authenticate with 88:25:93:af:9f:d2
[59639.404672] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[59639.405358] bridge-wlp3s0: disabling the bridge
[59639.412885] wlp3s0: authenticated
[59639.413134] wlp3s0: waiting for beacon from 88:25:93:af:9f:d2
[59639.428736] bridge-wlp3s0: down
[59639.428744] bridge-wlp3s0: detached
[59639.448737] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[59639.454395] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=24)
[59639.480148] wlp3s0: associated
[59639.606302] userif-3: sent link down event.
[59639.606308] userif-3: sent link up event.
[59640.472118] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[59640.472150] /dev/vmnet: port on hub 0 successfully opened
[59640.472165] bridge-wlp3s0: device is wireless, enabling SMAC
[59640.472175] bridge-wlp3s0: up
[59640.473032] bridge-wlp3s0: attached
[59640.672440] userif-3: sent link down event.
[59640.672443] userif-3: sent link up event.
[60119.078405] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:a0:b4
[60119.098434] wlp3s0: authenticate with 88:25:93:af:a0:b4
[60119.101410] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[60119.103539] wlp3s0: authenticated
[60119.106256] bridge-wlp3s0: disabling the bridge
[60119.110094] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[60119.114593] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=1)
[60119.126174] bridge-wlp3s0: down
[60119.126185] bridge-wlp3s0: detached
[60119.139983] wlp3s0: associated
[60119.306275] userif-3: sent link down event.
[60119.306279] userif-3: sent link up event.
[60120.127240] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[60120.127265] /dev/vmnet: port on hub 0 successfully opened
[60120.127277] bridge-wlp3s0: device is wireless, enabling SMAC
[60120.127285] bridge-wlp3s0: up
[60120.127723] bridge-wlp3s0: attached
[60120.327447] userif-3: sent link down event.
[60120.327454] userif-3: sent link up event.
[66221.115485] wlp3s0: deauthenticating from 88:25:93:af:a0:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[66221.147067] bridge-wlp3s0: disabling the bridge
[66221.179888] bridge-wlp3s0: down
[66221.179902] bridge-wlp3s0: detached
[66221.340161] userif-3: sent link down event.
[66221.340164] userif-3: sent link up event.
[66226.758089] PM: Syncing filesystems ... done.
[66226.880028] PM: Preparing system for sleep (mem)
[66226.886942] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[66226.886985] Freezing user space processes ... (elapsed 0.003 seconds) done.
[66226.890162] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[66226.891514] PM: Suspending system (mem)
[66226.891539] Suspending console(s) (use no_console_suspend to debug)
[66226.892209] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[66226.900324] sd 2:0:0:0: [sdb] Stopping disk
[66227.066501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[66227.070006] sd 0:0:0:0: [sda] Stopping disk
[66227.154000] ACPI : EC: event blocked
[66227.154041] e1000e: EEE TX LPI TIMER: 00000011
[66227.584545] PM: suspend of devices complete after 692.803 msecs
[66227.603778] PM: late suspend of devices complete after 19.225 msecs
[66227.604329] ACPI : EC: interrupt blocked
[66227.604564] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[66227.605591] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[66227.605665] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[66227.605707] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[66227.643680] PM: noirq suspend of devices complete after 39.896 msecs
[66227.644376] ACPI: Preparing to enter system sleep state S3
[66227.652801] ACPI : EC: EC stopped
[66227.652801] PM: Saving platform NVS memory
[66227.652815] Disabling non-boot CPUs ...
[66227.676002] Broke affinity for irq 16
[66227.676007] Broke affinity for irq 23
[66227.676012] Broke affinity for irq 29
[66227.676015] Broke affinity for irq 30
[66227.676018] Broke affinity for irq 31
[66227.676022] Broke affinity for irq 33
[66227.677351] smpboot: CPU 1 is now offline
[66227.700201] Broke affinity for irq 16
[66227.700219] Broke affinity for irq 23
[66227.700227] Broke affinity for irq 29
[66227.700230] Broke affinity for irq 30
[66227.700232] Broke affinity for irq 31
[66227.700236] Broke affinity for irq 33
[66227.700239] Broke affinity for irq 35
[66227.701260] smpboot: CPU 2 is now offline
[66227.724089] Broke affinity for irq 1
[66227.724094] Broke affinity for irq 8
[66227.724098] Broke affinity for irq 9
[66227.724103] Broke affinity for irq 12
[66227.724107] Broke affinity for irq 16
[66227.724111] Broke affinity for irq 18
[66227.724115] Broke affinity for irq 23
[66227.724121] Broke affinity for irq 27
[66227.724124] Broke affinity for irq 28
[66227.724136] Broke affinity for irq 29
[66227.724138] Broke affinity for irq 30
[66227.724140] Broke affinity for irq 31
[66227.724143] Broke affinity for irq 32
[66227.724146] Broke affinity for irq 33
[66227.724148] Broke affinity for irq 35
[66227.725163] smpboot: CPU 3 is now offline
[66227.728758] ACPI: Low-level resume complete
[66227.728854] ACPI : EC: EC started
[66227.728855] PM: Restoring platform NVS memory
[66227.729205] Suspended for 4578.860 seconds
[66227.729390] Enabling non-boot CPUs ...
[66227.731601] x86: Booting SMP configuration:
[66227.731603] smpboot: Booting Node 0 Processor 1 APIC 0x1
[66227.732410] Disabled fast string operations
[66227.734790]  cache: parent cpu1 should not be sleeping
[66227.739100] CPU1 is up
[66227.741216] smpboot: Booting Node 0 Processor 2 APIC 0x2
[66227.741951] Disabled fast string operations
[66227.744312]  cache: parent cpu2 should not be sleeping
[66227.748748] CPU2 is up
[66227.750895] smpboot: Booting Node 0 Processor 3 APIC 0x3
[66227.751628] Disabled fast string operations
[66227.754027]  cache: parent cpu3 should not be sleeping
[66227.757953] CPU3 is up
[66227.766134] ACPI: Waking up from system sleep state S3
[66227.776399] thinkpad_acpi: EC reports that Thermal Table has changed
[66227.786712] ACPI : EC: interrupt unblocked
[66227.814259] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445244024928228989 new 18445244020349368544 attempts 1
[66227.834567] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[66227.838346] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[66227.838370] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[66227.838525] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[66227.838636] PM: noirq resume of devices complete after 52.414 msecs
[66227.839480] PM: early resume of devices complete after 0.788 msecs
[66227.839572] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[66227.839798] ACPI : EC: event unblocked
[66227.840112] usb usb1: root hub lost power or was reset
[66227.840117] usb usb2: root hub lost power or was reset
[66227.841141] rtc_cmos 00:02: System wakeup disabled by ACPI
[66227.842362] sd 0:0:0:0: [sda] Starting disk
[66227.842407] sd 2:0:0:0: [sdb] Starting disk
[66228.086325] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[66228.188955] ata2: SATA link down (SStatus 0 SControl 300)
[66228.189008] ata5: SATA link down (SStatus 0 SControl 300)
[66228.189050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[66228.189708] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[66228.189714] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[66228.189719] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[66228.191613] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[66228.191618] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[66228.191623] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[66228.192809] ata3.00: configured for UDMA/133
[66228.274303] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[66228.623197] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[66229.830273] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[66230.111177] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[66230.111185] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[66230.111189] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[66230.168291] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[66230.168298] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[66230.168303] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[66230.194789] ata1.00: configured for UDMA/133
[66230.808264] PM: resume of devices complete after 2968.863 msecs
[66230.808487] usb 3-1.4:1.0: rebind failed: -517
[66230.808492] usb 3-1.4:1.1: rebind failed: -517
[66230.808933] PM: Finishing wakeup.
[66230.808935] Restarting tasks ... 
[66230.815657] usb 4-1.2: USB disconnect, device number 4
[66230.823305] done.
[66231.109861] e1000e: enp0s25 NIC Link is Down
[66231.113318] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[66231.115474] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[66231.115719] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[66231.115815] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[66231.396838] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[66231.397159] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[66231.397265] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[66231.480388] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[66231.481943] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[66231.694916] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[66231.772110] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[66238.082274] wlp3s0: authenticate with c8:3a:35:55:50:90
[66238.087409] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[66238.099113] wlp3s0: authenticated
[66238.105971] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[66238.217976] wlp3s0: associate with c8:3a:35:55:50:90 (try 2/3)
[66238.325959] wlp3s0: associate with c8:3a:35:55:50:90 (try 3/3)
[66238.434002] wlp3s0: association with c8:3a:35:55:50:90 timed out
[66241.751138] wlp3s0: authenticate with c8:3a:35:55:50:90
[66241.754568] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[66241.756980] wlp3s0: authenticated
[66241.757857] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[66241.764248] wlp3s0: RX AssocResp from c8:3a:35:55:50:90 (capab=0x411 status=0 aid=4)
[66241.789854] wlp3s0: associated
[66241.789933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[66241.798589] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[66241.798606] /dev/vmnet: port on hub 0 successfully opened
[66241.798616] bridge-wlp3s0: device is wireless, enabling SMAC
[66241.798622] bridge-wlp3s0: up
[66241.800081] bridge-wlp3s0: attached
[66241.998213] userif-3: sent link down event.
[66241.998216] userif-3: sent link up event.
[72362.136445] thinkpad_acpi: EC reports that Thermal Table has changed
[72392.826103] usb 3-1.2: new full-speed USB device number 5 using ehci-pci
[72392.938611] usb 3-1.2: New USB device found, idVendor=1d57, idProduct=fa60
[72392.938618] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[72392.938622] usb 3-1.2: Product: 2.4G Receiver
[72392.938625] usb 3-1.2: Manufacturer: Compx
[72392.942701] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1D57:FA60.0003/input/input20
[72393.003353] hid-generic 0003:1D57:FA60.0003: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
[72393.006488] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1D57:FA60.0004/input/input21
[72393.007588] hid-generic 0003:1D57:FA60.0004: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
[72393.010891] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:1D57:FA60.0005/input/input22
[72393.070866] hid-generic 0003:1D57:FA60.0005: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input2
[75230.443626] QDBusConnection[26266]: segfault at 7f1cacb3ef80 ip 00007f1cdd8247af sp 00007f1cc98657d0 error 4 in libQt5Core.so.5.6.1[7f1cdd56e000+4c6000]
[75230.456610] deepin-notifica[30980]: segfault at 7f3ae4057ce0 ip 00007f3af550b863 sp 00007ffd2091b930 error 4 in libQt5Gui.so.5.6.1[7f3af5383000+56a000]
[75230.457149] dde-launcher[2227]: segfault at 7f3f20016ce0 ip 00007f3f32bd8863 sp 00007fff06d5cf70 error 4 in libQt5Gui.so.5.6.1[7f3f32a50000+56a000]
[75230.457604] dde-control-cen[1519]: segfault at 7efe48044ce0 ip 00007efe6e4f4863 sp 00007fffbef9f750 error 4 in libQt5Gui.so.5.6.1[7efe6e36c000+56a000]
[75230.581521] dde-dock[870]: segfault at 7fcc13d80ce0 ip 00007fcc44abd863 sp 00007ffd0646fc70 error 4 in libQt5Gui.so.5.6.1[7fcc44935000+56a000]
[75231.110326] chrome[16285]: segfault at 968 ip 00007f5b9f77aed3 sp 00007ffec6df28e0 error 4 in libX11.so.6.3.0[7f5b9f74d000+13a000]
[75304.236734] wlp3s0: deauthenticating from c8:3a:35:55:50:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[75304.262300] bridge-wlp3s0: disabling the bridge
[75304.277252] bridge-wlp3s0: down
[75304.277263] bridge-wlp3s0: detached
[75304.462570] userif-3: sent link down event.
[75304.462571] userif-3: sent link up event.
[75309.664713] PM: Syncing filesystems ... done.
[75309.731843] PM: Preparing system for sleep (mem)
[75309.732317] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[75309.732339] Freezing user space processes ... (elapsed 0.002 seconds) done.
[75309.734477] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[75309.735723] PM: Suspending system (mem)
[75309.735743] Suspending console(s) (use no_console_suspend to debug)
[75309.740157] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[75309.744428] sd 2:0:0:0: [sdb] Stopping disk
[75309.917961] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[75309.921770] sd 0:0:0:0: [sda] Stopping disk
[75310.004793] ACPI : EC: event blocked
[75310.004914] e1000e: EEE TX LPI TIMER: 00000011
[75310.572571] PM: suspend of devices complete after 836.673 msecs
[75310.589137] PM: late suspend of devices complete after 16.563 msecs
[75310.589460] ACPI : EC: interrupt blocked
[75310.592250] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[75310.592351] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[75310.592461] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[75310.592530] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[75310.629094] PM: noirq suspend of devices complete after 39.951 msecs
[75310.629762] ACPI: Preparing to enter system sleep state S3
[75310.637903] ACPI : EC: EC stopped
[75310.637904] PM: Saving platform NVS memory
[75310.637916] Disabling non-boot CPUs ...
[75310.661420] Broke affinity for irq 16
[75310.661425] Broke affinity for irq 29
[75310.661428] Broke affinity for irq 30
[75310.661430] Broke affinity for irq 31
[75310.661433] Broke affinity for irq 35
[75310.662626] smpboot: CPU 1 is now offline
[75310.681370] Broke affinity for irq 16
[75310.681384] Broke affinity for irq 29
[75310.681386] Broke affinity for irq 30
[75310.681388] Broke affinity for irq 31
[75310.681399] Broke affinity for irq 33
[75310.681401] Broke affinity for irq 35
[75310.682413] smpboot: CPU 2 is now offline
[75310.705352] Broke affinity for irq 1
[75310.705356] Broke affinity for irq 8
[75310.705358] Broke affinity for irq 9
[75310.705361] Broke affinity for irq 12
[75310.705364] Broke affinity for irq 16
[75310.705368] Broke affinity for irq 18
[75310.705371] Broke affinity for irq 23
[75310.705374] Broke affinity for irq 27
[75310.705377] Broke affinity for irq 28
[75310.705379] Broke affinity for irq 29
[75310.705381] Broke affinity for irq 30
[75310.705384] Broke affinity for irq 31
[75310.705386] Broke affinity for irq 32
[75310.705389] Broke affinity for irq 33
[75310.705392] Broke affinity for irq 35
[75310.706403] smpboot: CPU 3 is now offline
[75310.708452] ACPI: Low-level resume complete
[75310.708498] ACPI : EC: EC started
[75310.708498] PM: Restoring platform NVS memory
[75310.708788] Suspended for 38261.744 seconds
[75310.708865] Enabling non-boot CPUs ...
[75310.709732] x86: Booting SMP configuration:
[75310.709733] smpboot: Booting Node 0 Processor 1 APIC 0x1
[75310.710006] Disabled fast string operations
[75310.712165]  cache: parent cpu1 should not be sleeping
[75310.717892] CPU1 is up
[75310.718768] smpboot: Booting Node 0 Processor 2 APIC 0x2
[75310.719012] Disabled fast string operations
[75310.721174]  cache: parent cpu2 should not be sleeping
[75310.726660] CPU2 is up
[75310.727504] smpboot: Booting Node 0 Processor 3 APIC 0x3
[75310.727747] Disabled fast string operations
[75310.729923]  cache: parent cpu3 should not be sleeping
[75310.735377] CPU3 is up
[75310.738357] ACPI: Waking up from system sleep state S3
[75310.757108] ACPI : EC: interrupt unblocked
[75310.798792] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[75310.810359] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[75310.810378] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[75310.810425] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[75310.810471] PM: noirq resume of devices complete after 53.559 msecs
[75310.810799] PM: early resume of devices complete after 0.298 msecs
[75310.810871] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[75310.810918] ACPI : EC: event unblocked
[75310.811154] usb usb1: root hub lost power or was reset
[75310.811156] usb usb2: root hub lost power or was reset
[75310.813308] rtc_cmos 00:02: System wakeup disabled by ACPI
[75310.814744] sd 0:0:0:0: [sda] Starting disk
[75310.814750] sd 2:0:0:0: [sdb] Starting disk
[75311.066289] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[75311.160829] ata2: SATA link down (SStatus 0 SControl 300)
[75311.160912] ata5: SATA link down (SStatus 0 SControl 300)
[75311.160937] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[75311.161479] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[75311.161480] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[75311.161482] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[75311.163553] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[75311.163558] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[75311.163562] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[75311.164861] ata3.00: configured for UDMA/133
[75311.254276] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[75311.442277] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445244020349368544 new 18445243982087624144 attempts 1
[75311.602226] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[75311.738337] usb 3-1.2: reset full-speed USB device number 5 using ehci-pci
[75311.853109] PM: resume of devices complete after 1042.338 msecs
[75311.853207] usb 3-1.4:1.0: rebind failed: -517
[75311.853209] usb 3-1.4:1.1: rebind failed: -517
[75311.853399] PM: Finishing wakeup.
[75311.853400] Restarting tasks ... done.
[75312.778296] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[75313.088462] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[75313.088466] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[75313.088468] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[75313.145234] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[75313.145238] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[75313.145239] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[75313.171592] ata1.00: configured for UDMA/133
[75313.337650] e1000e: enp0s25 NIC Link is Down
[75313.340774] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[75313.342315] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[75313.342561] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[75313.342658] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[75313.620332] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[75313.620576] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[75313.620672] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[75313.709542] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[75313.711405] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[75313.930727] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[75313.986391] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[75320.209525] wlp3s0: authenticate with c8:3a:35:55:50:90
[75320.213526] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[75320.215617] wlp3s0: authenticated
[75320.217999] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[75320.223885] wlp3s0: RX AssocResp from c8:3a:35:55:50:90 (capab=0x411 status=0 aid=5)
[75320.249944] wlp3s0: associated
[75320.250030] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[75320.264272] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[75320.264283] /dev/vmnet: hub 0 does not exist, allocating memory.
[75320.264301] /dev/vmnet: port on hub 0 successfully opened
[75320.264310] bridge-wlp3s0: device is wireless, enabling SMAC
[75320.264312] bridge-wlp3s0: up
[75320.264314] bridge-wlp3s0: attached
[75320.464338] userif-3: sent link down event.
[75320.464341] userif-3: sent link up event.
[78345.131121] perf: interrupt took too long (6248 > 6246), lowering kernel.perf_event_max_sample_rate to 32000
[78456.709899] wlp3s0: deauthenticating from c8:3a:35:55:50:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[78456.742585] bridge-wlp3s0: disabling the bridge
[78456.770278] bridge-wlp3s0: down
[78456.770286] bridge-wlp3s0: detached
[78456.933833] userif-3: sent link down event.
[78456.933836] userif-3: sent link up event.
[78462.592015] PM: Syncing filesystems ... done.
[78462.652519] PM: Preparing system for sleep (mem)
[78462.652967] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[78462.652984] Freezing user space processes ... (elapsed 0.003 seconds) done.
[78462.656118] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[78462.657647] PM: Suspending system (mem)
[78462.657681] Suspending console(s) (use no_console_suspend to debug)
[78462.658380] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[78462.660802] sd 2:0:0:0: [sdb] Stopping disk
[78462.827728] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[78462.828029] sd 0:0:0:0: [sda] Stopping disk
[78462.915483] e1000e: EEE TX LPI TIMER: 00000011
[78462.915538] ACPI : EC: event blocked
[78463.216009] PM: suspend of devices complete after 558.029 msecs
[78463.234311] PM: late suspend of devices complete after 18.296 msecs
[78463.234999] ACPI : EC: interrupt blocked
[78463.236117] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[78463.236143] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[78463.236247] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[78463.236307] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[78463.274121] PM: noirq suspend of devices complete after 39.804 msecs
[78463.274793] ACPI: Preparing to enter system sleep state S3
[78463.283095] ACPI : EC: EC stopped
[78463.283096] PM: Saving platform NVS memory
[78463.283118] Disabling non-boot CPUs ...
[78463.306669] Broke affinity for irq 16
[78463.306679] Broke affinity for irq 29
[78463.306684] Broke affinity for irq 30
[78463.306689] Broke affinity for irq 31
[78463.306695] Broke affinity for irq 33
[78463.307734] smpboot: CPU 1 is now offline
[78463.330409] Broke affinity for irq 16
[78463.330431] Broke affinity for irq 29
[78463.330433] Broke affinity for irq 30
[78463.330435] Broke affinity for irq 31
[78463.330438] Broke affinity for irq 33
[78463.330441] Broke affinity for irq 35
[78463.331461] smpboot: CPU 2 is now offline
[78463.354613] Broke affinity for irq 1
[78463.354620] Broke affinity for irq 8
[78463.354624] Broke affinity for irq 9
[78463.354630] Broke affinity for irq 12
[78463.354635] Broke affinity for irq 16
[78463.354640] Broke affinity for irq 18
[78463.354646] Broke affinity for irq 23
[78463.354652] Broke affinity for irq 27
[78463.354657] Broke affinity for irq 28
[78463.354661] Broke affinity for irq 29
[78463.354665] Broke affinity for irq 30
[78463.354676] Broke affinity for irq 31
[78463.354678] Broke affinity for irq 32
[78463.354681] Broke affinity for irq 33
[78463.354683] Broke affinity for irq 35
[78463.355694] smpboot: CPU 3 is now offline
[78463.357934] ACPI: Low-level resume complete
[78463.357979] ACPI : EC: EC started
[78463.357980] PM: Restoring platform NVS memory
[78463.358272] Suspended for 17266.255 seconds
[78463.358342] Enabling non-boot CPUs ...
[78463.359227] x86: Booting SMP configuration:
[78463.359228] smpboot: Booting Node 0 Processor 1 APIC 0x1
[78463.359523] Disabled fast string operations
[78463.361678]  cache: parent cpu1 should not be sleeping
[78463.367097] CPU1 is up
[78463.367985] smpboot: Booting Node 0 Processor 2 APIC 0x2
[78463.368228] Disabled fast string operations
[78463.370387]  cache: parent cpu2 should not be sleeping
[78463.375930] CPU2 is up
[78463.376787] smpboot: Booting Node 0 Processor 3 APIC 0x3
[78463.377031] Disabled fast string operations
[78463.379206]  cache: parent cpu3 should not be sleeping
[78463.385115] CPU3 is up
[78463.388088] ACPI: Waking up from system sleep state S3
[78463.406856] ACPI : EC: interrupt unblocked
[78463.447810] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[78463.455479] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[78463.455487] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[78463.455523] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[78463.455577] PM: noirq resume of devices complete after 48.909 msecs
[78463.455930] PM: early resume of devices complete after 0.324 msecs
[78463.455998] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[78463.456037] ACPI : EC: event unblocked
[78463.456368] usb usb1: root hub lost power or was reset
[78463.456369] usb usb2: root hub lost power or was reset
[78463.459481] rtc_cmos 00:02: System wakeup disabled by ACPI
[78463.466401] sd 2:0:0:0: [sdb] Starting disk
[78463.466402] sd 0:0:0:0: [sda] Starting disk
[78463.715368] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[78463.813917] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[78463.814017] ata5: SATA link down (SStatus 0 SControl 300)
[78463.814040] ata2: SATA link down (SStatus 0 SControl 300)
[78463.814595] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[78463.814600] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[78463.814605] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[78463.816671] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[78463.816676] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[78463.816681] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[78463.817874] ata3.00: configured for UDMA/133
[78463.903455] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[78464.243334] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445243982087624144 new 18445243964821368555 attempts 1
[78464.251376] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[78464.387404] usb 3-1.2: reset full-speed USB device number 5 using ehci-pci
[78464.501823] PM: resume of devices complete after 1045.922 msecs
[78464.501918] usb 3-1.4:1.0: rebind failed: -517
[78464.501919] usb 3-1.4:1.1: rebind failed: -517
[78464.502372] PM: Finishing wakeup.
[78464.502373] Restarting tasks ... done.
[78465.431334] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[78465.756092] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[78465.756096] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[78465.756098] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[78465.812803] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[78465.812806] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[78465.812808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[78465.839213] ata1.00: configured for UDMA/133
[78465.998865] e1000e: enp0s25 NIC Link is Down
[78466.001835] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[78466.003342] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[78466.003585] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[78466.003684] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[78466.281656] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[78466.281900] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[78466.281997] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[78466.366235] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[78466.368918] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[78466.587540] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[78466.655795] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[78472.946174] wlp3s0: authenticate with c8:3a:35:55:50:90
[78472.948706] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[78472.961383] wlp3s0: authenticated
[78472.963091] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[78473.075102] wlp3s0: associate with c8:3a:35:55:50:90 (try 2/3)
[78473.164031] wlp3s0: RX AssocResp from c8:3a:35:55:50:90 (capab=0x411 status=0 aid=5)
[78473.186277] wlp3s0: associated
[78473.186453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[78473.406083] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[78473.406112] /dev/vmnet: hub 0 does not exist, allocating memory.
[78473.406168] /dev/vmnet: port on hub 0 successfully opened
[78473.406190] bridge-wlp3s0: device is wireless, enabling SMAC
[78473.406195] bridge-wlp3s0: up
[78473.406203] bridge-wlp3s0: attached
[78473.606268] userif-3: sent link down event.
[78473.606270] userif-3: sent link up event.
[81972.789861] dde-control-cen[16521]: segfault at 7fc404011ce0 ip 00007fc42724b863 sp 00007fffc46744e0 error 4 in libQt5Gui.so.5.6.1[7fc4270c3000+56a000]
[81972.791169] deepin-notifica[26665]: segfault at 7fd320011ce0 ip 00007fd3335e7863 sp 00007ffc7de2aba0 error 4 in libQt5Gui.so.5.6.1[7fd33345f000+56a000]
[81972.809004] dde-launcher[17247]: segfault at 7f9295e59ce0 ip 00007f92c4ea9863 sp 00007fff3d6201d0 error 4 in libQt5Gui.so.5.6.1[7f92c4d21000+56a000]
[81972.822261] dde-dock[16731]: segfault at 7fe2b00f2ce0 ip 00007fe2c9b09863 sp 00007ffc8306a8f0 error 4 in libQt5Gui.so.5.6.1[7fe2c9981000+56a000]
[81973.810844] chrome[7222]: segfault at 968 ip 00007f4219f19ed3 sp 00007ffce8c1fc70 error 4 in libX11.so.6.3.0[7f4219eec000+13a000]
[85079.209391] /dev/vmmon[12382]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[85128.735156] /dev/vmnet: open called by PID 12412 (vmx-vcpu-0)
[85128.735181] /dev/vmnet: port on hub 0 successfully opened
[85128.735199] /dev/vmnet: open called by PID 12412 (vmx-vcpu-0)
[85128.735208] /dev/vmnet: port on hub 0 successfully opened
[90009.461990] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[90009.461992] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[90009.462008] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[90009.462009] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[90009.463011] CPU0: Package temperature/speed normal
[90009.463012] CPU1: Package temperature/speed normal
[90009.463013] CPU2: Package temperature/speed normal
[90009.463029] CPU3: Package temperature/speed normal
[90431.343195] CPU3: Package temperature above threshold, cpu clock throttled (total events = 52942)
[90431.343196] CPU2: Package temperature above threshold, cpu clock throttled (total events = 52942)
[90431.343199] CPU0: Package temperature above threshold, cpu clock throttled (total events = 52942)
[90431.343203] CPU1: Package temperature above threshold, cpu clock throttled (total events = 52942)
[90431.344197] CPU2: Package temperature/speed normal
[90431.344198] CPU3: Package temperature/speed normal
[90431.344218] CPU0: Package temperature/speed normal
[90431.344219] CPU1: Package temperature/speed normal
[91418.191700] wlp3s0: deauthenticating from c8:3a:35:55:50:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[91418.216894] bridge-wlp3s0: disabling the bridge
[91418.236009] bridge-wlp3s0: down
[91418.236017] bridge-wlp3s0: detached
[91418.416065] userif-3: sent link down event.
[91418.416069] userif-3: sent link up event.
[91423.718975] PM: Syncing filesystems ... done.
[91423.789668] PM: Preparing system for sleep (mem)
[91423.790162] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[91423.790176] Freezing user space processes ... (elapsed 0.003 seconds) done.
[91423.793199] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[91423.794612] PM: Suspending system (mem)
[91423.794648] Suspending console(s) (use no_console_suspend to debug)
[91423.795689] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[91423.798823] sd 2:0:0:0: [sdb] Stopping disk
[91423.964506] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[91423.964727] sd 0:0:0:0: [sda] Stopping disk
[91424.051738] e1000e: EEE TX LPI TIMER: 00000011
[91424.051787] ACPI : EC: event blocked
[91424.486160] PM: suspend of devices complete after 691.178 msecs
[91424.503920] PM: late suspend of devices complete after 17.748 msecs
[91424.504462] ACPI : EC: interrupt blocked
[91424.504793] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[91424.505627] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[91424.505797] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[91424.505816] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[91424.543819] PM: noirq suspend of devices complete after 39.893 msecs
[91424.544481] ACPI: Preparing to enter system sleep state S3
[91424.552124] ACPI : EC: EC stopped
[91424.552126] PM: Saving platform NVS memory
[91424.552148] Disabling non-boot CPUs ...
[91424.576123] Broke affinity for irq 16
[91424.576129] Broke affinity for irq 29
[91424.576132] Broke affinity for irq 30
[91424.576134] Broke affinity for irq 31
[91424.576137] Broke affinity for irq 32
[91424.577163] smpboot: CPU 1 is now offline
[91424.600348] Broke affinity for irq 16
[91424.600374] Broke affinity for irq 29
[91424.600378] Broke affinity for irq 30
[91424.600382] Broke affinity for irq 31
[91424.600387] Broke affinity for irq 32
[91424.600393] Broke affinity for irq 33
[91424.602008] smpboot: CPU 2 is now offline
[91424.632275] Broke affinity for irq 1
[91424.632280] Broke affinity for irq 8
[91424.632285] Broke affinity for irq 9
[91424.632289] Broke affinity for irq 12
[91424.632293] Broke affinity for irq 16
[91424.632297] Broke affinity for irq 18
[91424.632302] Broke affinity for irq 23
[91424.632308] Broke affinity for irq 27
[91424.632311] Broke affinity for irq 28
[91424.632315] Broke affinity for irq 29
[91424.632318] Broke affinity for irq 30
[91424.632321] Broke affinity for irq 31
[91424.632325] Broke affinity for irq 32
[91424.632329] Broke affinity for irq 33
[91424.632333] Broke affinity for irq 35
[91424.633383] smpboot: CPU 3 is now offline
[91424.637032] ACPI: Low-level resume complete
[91424.637077] ACPI : EC: EC started
[91424.637077] PM: Restoring platform NVS memory
[91424.637368] Suspended for 14593.326 seconds
[91424.637448] Enabling non-boot CPUs ...
[91424.638385] x86: Booting SMP configuration:
[91424.638385] smpboot: Booting Node 0 Processor 1 APIC 0x1
[91424.638658] Disabled fast string operations
[91424.640823]  cache: parent cpu1 should not be sleeping
[91424.646354] CPU1 is up
[91424.647280] smpboot: Booting Node 0 Processor 2 APIC 0x2
[91424.647524] Disabled fast string operations
[91424.649679]  cache: parent cpu2 should not be sleeping
[91424.655499] CPU2 is up
[91424.656412] smpboot: Booting Node 0 Processor 3 APIC 0x3
[91424.656656] Disabled fast string operations
[91424.658827]  cache: parent cpu3 should not be sleeping
[91424.664494] CPU3 is up
[91424.667476] ACPI: Waking up from system sleep state S3
[91424.686705] ACPI : EC: interrupt unblocked
[91424.729762] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[91424.737488] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[91424.737516] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[91424.737551] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[91424.737602] PM: noirq resume of devices complete after 51.081 msecs
[91424.737935] PM: early resume of devices complete after 0.303 msecs
[91424.737967] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[91424.738047] ACPI : EC: event unblocked
[91424.738529] usb usb1: root hub lost power or was reset
[91424.738530] usb usb2: root hub lost power or was reset
[91424.738559] rtc_cmos 00:02: System wakeup disabled by ACPI
[91424.748592] sd 2:0:0:0: [sdb] Starting disk
[91424.748594] sd 0:0:0:0: [sda] Starting disk
[91424.993406] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[91425.099993] ata2: SATA link down (SStatus 0 SControl 300)
[91425.100034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[91425.100092] ata5: SATA link down (SStatus 0 SControl 300)
[91425.100658] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[91425.100663] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[91425.100667] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[91425.102672] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[91425.102678] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[91425.102682] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[91425.103871] ata3.00: configured for UDMA/133
[91425.181401] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[91425.528352] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[91425.641390] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445243964821368555 new 18445243950228041599 attempts 1
[91425.693383] usb 3-1.2: reset full-speed USB device number 5 using ehci-pci
[91425.807764] PM: resume of devices complete after 1069.859 msecs
[91425.807854] usb 3-1.4:1.0: rebind failed: -517
[91425.807856] usb 3-1.4:1.1: rebind failed: -517
[91425.808035] PM: Finishing wakeup.
[91425.808036] Restarting tasks ... done.
[91426.725370] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[91427.021676] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[91427.021679] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[91427.021682] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[91427.078395] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[91427.078399] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[91427.078402] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[91427.104824] ata1.00: configured for UDMA/133
[91427.270735] e1000e: enp0s25 NIC Link is Down
[91427.274120] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[91427.276273] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[91427.276537] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[91427.276634] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[91427.555504] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[91427.555746] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[91427.555842] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[91427.642286] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[91427.645454] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[91427.857608] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[91427.911621] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[91434.335733] wlp3s0: authenticate with c8:3a:35:55:50:90
[91434.339674] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[91434.350114] wlp3s0: authenticated
[91434.353119] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[91434.461127] wlp3s0: associate with c8:3a:35:55:50:90 (try 2/3)
[91434.569131] wlp3s0: associate with c8:3a:35:55:50:90 (try 3/3)
[91434.677116] wlp3s0: association with c8:3a:35:55:50:90 timed out
[91438.105059] wlp3s0: authenticate with c8:3a:35:55:50:90
[91438.108833] wlp3s0: send auth to c8:3a:35:55:50:90 (try 1/3)
[91438.112112] wlp3s0: authenticated
[91438.116999] wlp3s0: associate with c8:3a:35:55:50:90 (try 1/3)
[91438.123254] wlp3s0: RX AssocResp from c8:3a:35:55:50:90 (capab=0x411 status=0 aid=5)
[91438.149102] wlp3s0: associated
[91438.149155] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[91438.159588] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[91438.159602] /dev/vmnet: hub 0 does not exist, allocating memory.
[91438.159621] /dev/vmnet: port on hub 0 successfully opened
[91438.159630] bridge-wlp3s0: device is wireless, enabling SMAC
[91438.159632] bridge-wlp3s0: up
[91438.159715] bridge-wlp3s0: attached
[91438.359577] userif-3: sent link down event.
[91438.359581] userif-3: sent link up event.
[95018.709457] wlp3s0: deauthenticating from c8:3a:35:55:50:90 by local choice (Reason: 3=DEAUTH_LEAVING)
[95018.733814] bridge-wlp3s0: disabling the bridge
[95018.751722] bridge-wlp3s0: down
[95018.751729] bridge-wlp3s0: detached
[95018.933737] userif-3: sent link down event.
[95018.933740] userif-3: sent link up event.
[95024.123373] PM: Syncing filesystems ... done.
[95024.230072] PM: Preparing system for sleep (mem)
[95024.230786] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[95024.230825] Freezing user space processes ... (elapsed 0.002 seconds) done.
[95024.233117] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[95024.234372] PM: Suspending system (mem)
[95024.234391] Suspending console(s) (use no_console_suspend to debug)
[95024.234739] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[95024.237162] sd 2:0:0:0: [sdb] Stopping disk
[95024.405009] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[95024.405208] sd 0:0:0:0: [sda] Stopping disk
[95024.492996] ACPI : EC: event blocked
[95024.493088] e1000e: EEE TX LPI TIMER: 00000011
[95024.765571] PM: suspend of devices complete after 531.038 msecs
[95024.783803] PM: late suspend of devices complete after 18.222 msecs
[95024.784970] ACPI : EC: interrupt blocked
[95024.787046] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[95024.787159] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[95024.787271] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[95024.787325] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[95024.823576] PM: noirq suspend of devices complete after 39.768 msecs
[95024.824248] ACPI: Preparing to enter system sleep state S3
[95024.832628] ACPI : EC: EC stopped
[95024.832629] PM: Saving platform NVS memory
[95024.832651] Disabling non-boot CPUs ...
[95024.856042] Broke affinity for irq 16
[95024.856054] Broke affinity for irq 29
[95024.856059] Broke affinity for irq 30
[95024.856064] Broke affinity for irq 31
[95024.856070] Broke affinity for irq 33
[95024.857100] smpboot: CPU 1 is now offline
[95024.887925] Broke affinity for irq 16
[95024.887953] Broke affinity for irq 29
[95024.887957] Broke affinity for irq 30
[95024.887961] Broke affinity for irq 31
[95024.887967] Broke affinity for irq 33
[95024.887973] Broke affinity for irq 35
[95024.889206] smpboot: CPU 2 is now offline
[95024.911746] Broke affinity for irq 1
[95024.911748] Broke affinity for irq 8
[95024.911750] Broke affinity for irq 9
[95024.911752] Broke affinity for irq 12
[95024.911755] Broke affinity for irq 16
[95024.911757] Broke affinity for irq 18
[95024.911759] Broke affinity for irq 23
[95024.911762] Broke affinity for irq 27
[95024.911763] Broke affinity for irq 28
[95024.911765] Broke affinity for irq 29
[95024.911766] Broke affinity for irq 30
[95024.911768] Broke affinity for irq 31
[95024.911769] Broke affinity for irq 32
[95024.911772] Broke affinity for irq 33
[95024.911773] Broke affinity for irq 35
[95024.912782] smpboot: CPU 3 is now offline
[95024.917892] ACPI: Low-level resume complete
[95024.917989] ACPI : EC: EC started
[95024.917991] PM: Restoring platform NVS memory
[95024.918351] Suspended for 34620.612 seconds
[95024.918498] Enabling non-boot CPUs ...
[95024.921093] x86: Booting SMP configuration:
[95024.921095] smpboot: Booting Node 0 Processor 1 APIC 0x1
[95024.921903] Disabled fast string operations
[95024.924274]  cache: parent cpu1 should not be sleeping
[95024.929032] CPU1 is up
[95024.931613] smpboot: Booting Node 0 Processor 2 APIC 0x2
[95024.932348] Disabled fast string operations
[95024.934747]  cache: parent cpu2 should not be sleeping
[95024.938919] CPU2 is up
[95024.941413] smpboot: Booting Node 0 Processor 3 APIC 0x3
[95024.942145] Disabled fast string operations
[95024.944486]  cache: parent cpu3 should not be sleeping
[95024.948489] CPU3 is up
[95024.956630] ACPI: Waking up from system sleep state S3
[95024.967218] thinkpad_acpi: EC reports that Thermal Table has changed
[95024.977603] ACPI : EC: interrupt unblocked
[95025.023335] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[95025.026663] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[95025.026683] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[95025.026755] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[95025.026899] PM: noirq resume of devices complete after 49.737 msecs
[95025.027906] PM: early resume of devices complete after 0.948 msecs
[95025.027995] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[95025.028206] ACPI : EC: event unblocked
[95025.028562] usb usb1: root hub lost power or was reset
[95025.028567] usb usb2: root hub lost power or was reset
[95025.029325] rtc_cmos 00:02: System wakeup disabled by ACPI
[95025.030661] sd 0:0:0:0: [sda] Starting disk
[95025.030701] sd 2:0:0:0: [sdb] Starting disk
[95025.282624] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[95025.377104] ata5: SATA link down (SStatus 0 SControl 300)
[95025.377206] ata2: SATA link down (SStatus 0 SControl 300)
[95025.377308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[95025.377995] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95025.378001] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95025.378005] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95025.380067] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95025.380072] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95025.380076] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95025.381378] ata3.00: configured for UDMA/133
[95025.470626] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[95025.810507] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[95025.918570] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445243950228041599 new 18445243915607429418 attempts 1
[95026.994641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[95027.322272] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95027.322278] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95027.322282] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95027.379327] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95027.379333] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95027.379338] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95027.405819] ata1.00: configured for UDMA/133
[95028.005780] PM: resume of devices complete after 2977.956 msecs
[95028.006002] usb 3-1.4:1.0: rebind failed: -517
[95028.006008] usb 3-1.4:1.1: rebind failed: -517
[95028.006438] PM: Finishing wakeup.
[95028.006440] Restarting tasks ... 
[95028.010586] usb 3-1.2: USB disconnect, device number 5
[95028.026503] done.
[95028.126528] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[95028.303878] usb 1-1: New USB device found, idVendor=0461, idProduct=4d0f
[95028.303880] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[95028.303881] usb 1-1: Product: USB Optical Mouse
[95028.303882] usb 1-1: Manufacturer: PixArt
[95028.320253] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb1/1-1/1-1:1.0/0003:0461:4D0F.0006/input/input23
[95028.320424] hid-generic 0003:0461:4D0F.0006: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:05:00.0-1/input0
[95028.337730] e1000e: enp0s25 NIC Link is Down
[95028.342214] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95028.344537] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95028.344782] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95028.344885] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[95028.624630] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95028.624875] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[95028.624972] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[95028.707497] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95028.709347] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95028.922821] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95028.981261] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95035.073785] wlp3s0: authenticate with 88:25:93:af:a0:b4
[95035.084690] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[95035.088468] wlp3s0: authenticated
[95035.090281] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[95035.098837] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=5)
[95035.125291] wlp3s0: associated
[95035.125374] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[95036.124706] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[95036.124733] /dev/vmnet: hub 0 does not exist, allocating memory.
[95036.124763] /dev/vmnet: port on hub 0 successfully opened
[95036.124777] bridge-wlp3s0: device is wireless, enabling SMAC
[95036.124781] bridge-wlp3s0: up
[95036.124787] bridge-wlp3s0: attached
[95036.324824] userif-3: sent link down event.
[95036.324827] userif-3: sent link up event.
[95707.239377] /dev/vmmon[23364]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[95768.886705] /dev/vmnet: open called by PID 24143 (vmx-vcpu-0)
[95768.886726] /dev/vmnet: port on hub 0 successfully opened
[95768.886738] /dev/vmnet: open called by PID 24143 (vmx-vcpu-0)
[95768.886744] /dev/vmnet: port on hub 0 successfully opened
[96072.975023] wlp3s0: disconnect from AP 88:25:93:af:a0:b4 for new auth to 88:25:93:af:9f:d2
[96072.993409] wlp3s0: authenticate with 88:25:93:af:9f:d2
[96072.996179] wlp3s0: send auth to 88:25:93:af:9f:d2 (try 1/3)
[96072.996345] bridge-wlp3s0: disabling the bridge
[96073.008253] wlp3s0: authenticated
[96073.010607] wlp3s0: associate with 88:25:93:af:9f:d2 (try 1/3)
[96073.026620] bridge-wlp3s0: down
[96073.026629] bridge-wlp3s0: detached
[96073.033005] wlp3s0: RX AssocResp from 88:25:93:af:9f:d2 (capab=0x431 status=0 aid=10)
[96073.057480] wlp3s0: associated
[96073.196365] userif-3: sent link down event.
[96073.196370] userif-3: sent link up event.
[96074.046414] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[96074.046445] /dev/vmnet: port on hub 0 successfully opened
[96074.046464] bridge-wlp3s0: device is wireless, enabling SMAC
[96074.046478] bridge-wlp3s0: up
[96074.046485] bridge-wlp3s0: attached
[96074.246886] userif-3: sent link down event.
[96074.246892] userif-3: sent link up event.
[96313.437102] wlp3s0: disconnect from AP 88:25:93:af:9f:d2 for new auth to 88:25:93:af:a0:b4
[96313.455568] wlp3s0: authenticate with 88:25:93:af:a0:b4
[96313.459017] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[96313.459799] bridge-wlp3s0: disabling the bridge
[96313.462081] wlp3s0: authenticated
[96313.467296] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[96313.475222] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=12)
[96313.487278] bridge-wlp3s0: down
[96313.487288] bridge-wlp3s0: detached
[96313.502023] wlp3s0: associated
[96313.511207] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[96313.511228] /dev/vmnet: port on hub 0 successfully opened
[96313.511290] bridge-wlp3s0: device is wireless, enabling SMAC
[96313.511298] bridge-wlp3s0: up
[96313.511302] bridge-wlp3s0: attached
[96313.659766] userif-3: sent link down event.
[96313.659769] userif-3: sent link up event.
[96776.466267] docker0: port 1(vethe87a6de) entered blocking state
[96776.466270] docker0: port 1(vethe87a6de) entered disabled state
[96776.466600] device vethe87a6de entered promiscuous mode
[96776.468331] IPv6: ADDRCONF(NETDEV_UP): vethe87a6de: link is not ready
[96776.914764] eth0: renamed from veth421224f
[96776.937578] IPv6: ADDRCONF(NETDEV_CHANGE): vethe87a6de: link becomes ready
[96776.937687] docker0: port 1(vethe87a6de) entered blocking state
[96776.937689] docker0: port 1(vethe87a6de) entered forwarding state
[96777.137726] userif-3: sent link down event.
[96777.137728] userif-3: sent link up event.
[99140.305574] thinkpad_acpi: EC reports that Thermal Table has changed
[100514.428971] dde-launcher[8165]: segfault at 7f5a1001ace0 ip 00007f5a28048863 sp 00007fff576285c0 error 4 in libQt5Gui.so.5.6.1[7f5a27ec0000+56a000]
[100514.480719] deepin-notifica[13366]: segfault at 7f7b38085ce0 ip 00007f7b4a06f863 sp 00007ffcff4283b0 error 4 in libQt5Gui.so.5.6.1[7f7b49ee7000+56a000]
[100514.642784] dde-dock[7671]: segfault at 7f6ed8011ce0 ip 00007f6eec2eb863 sp 00007ffc8e072df0 error 4 in libQt5Gui.so.5.6.1[7f6eec163000+56a000]
[100514.826434] dde-control-cen[7498]: segfault at 7f0ae002bce0 ip 00007f0b042a2863 sp 00007ffda3927f80 error 4 in libQt5Gui.so.5.6.1[7f0b0411a000+56a000]
[100516.578737] chrome[23662]: segfault at 968 ip 00007fd2a68f4ed3 sp 00007ffc33896c30 error 4 in libX11.so.6.3.0[7fd2a68c7000+13a000]
[102169.520877] docker0: port 1(vethe87a6de) entered disabled state
[102169.521142] veth421224f: renamed from eth0
[102169.584607] docker0: port 1(vethe87a6de) entered disabled state
[102169.589083] device vethe87a6de left promiscuous mode
[102169.589088] docker0: port 1(vethe87a6de) entered disabled state
[102169.721050] userif-3: sent link down event.
[102169.721054] userif-3: sent link up event.
[102169.749557] docker0: port 1(vethf332596) entered blocking state
[102169.749560] docker0: port 1(vethf332596) entered disabled state
[102169.749971] device vethf332596 entered promiscuous mode
[102169.750502] IPv6: ADDRCONF(NETDEV_UP): vethf332596: link is not ready
[102169.750506] docker0: port 1(vethf332596) entered blocking state
[102169.750508] docker0: port 1(vethf332596) entered forwarding state
[102169.950385] userif-3: sent link down event.
[102169.950392] userif-3: sent link up event.
[102170.047146] eth0: renamed from vethc50fcd9
[102170.066361] IPv6: ADDRCONF(NETDEV_CHANGE): vethf332596: link becomes ready
[103468.396754] easystroke[24050]: segfault at 0 ip 00007f954244b041 sp 00007ffe66fce408 error 4 in libgtkmm-3.0.so.1.1.0[7f95420e9000+4a8000]
[103468.399559] dde-launcher[24457]: segfault at 7fba4804cce0 ip 00007fba6be5b863 sp 00007fff7a969730 error 4 in libQt5Gui.so.5.6.1[7fba6bcd3000+56a000]
[103468.400155] dde-polkit-agen[24023]: segfault at 7f4bddea3ce0 ip 00007f4c0319d863 sp 00007ffebde17e70 error 4 in libQt5Gui.so.5.6.1[7f4c03015000+56a000]
[103468.405453] deepin-notifica[23864]: segfault at 7f33e08e6ce0 ip 00007f33f4d72863 sp 00007ffea097f390 error 4 in libQt5Gui.so.5.6.1[7f33f4bea000+56a000]
[103468.410430] dde-control-cen[24120]: segfault at 7f1bd4152ce0 ip 00007f1bf88f6863 sp 00007ffdbe9f6ad0 error 4 in libQt5Gui.so.5.6.1[7f1bf876e000+56a000]
[103468.421330] dde-dock[23951]: segfault at 7fe74c11ace0 ip 00007fe76f57d863 sp 00007ffed42fdcd0 error 4 in libQt5Gui.so.5.6.1[7fe76f3f5000+56a000]
[103469.464217] chrome[28890]: segfault at 968 ip 00007f50ca1e1ed3 sp 00007fff9b9ab5f0 error 4 in libX11.so.6.3.0[7f50ca1b4000+13a000]
[103582.718152] docker0: port 1(vethf332596) entered disabled state
[103582.718434] vethc50fcd9: renamed from eth0
[103582.769875] docker0: port 1(vethf332596) entered disabled state
[103582.774247] device vethf332596 left promiscuous mode
[103582.774251] docker0: port 1(vethf332596) entered disabled state
[103582.918190] userif-3: sent link down event.
[103582.918195] userif-3: sent link up event.
[103583.937997] userif-3: sent link down event.
[103583.938004] userif-3: sent link up event.
[103833.046417] gedit[29855]: segfault at 0 ip 00007f330dd11f90 sp 00007ffe4b747f18 error 4 in libgtk-3.so.0.2200.11[7f330dc01000+700000]
[104234.976896] /dev/vmmon[31493]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[104237.558049] /dev/vmnet: open called by PID 31519 (vmx-vcpu-0)
[104237.558068] /dev/vmnet: port on hub 0 successfully opened
[104237.558080] /dev/vmnet: open called by PID 31519 (vmx-vcpu-0)
[104237.558087] /dev/vmnet: port on hub 0 successfully opened
[104482.280791] dde-launcher[30734]: segfault at 7fdf78075ce0 ip 00007fdf89f91863 sp 00007ffe2c8a0680 error 4 in libQt5Gui.so.5.6.1[7fdf89e09000+56a000]
[104482.291914] dde-dock[29175]: segfault at 7fd8e6059ce0 ip 00007fd90a577863 sp 00007ffec5d3ee90 error 4 in libQt5Gui.so.5.6.1[7fd90a3ef000+56a000]
[104482.296085] deepin-notifica[29090]: segfault at 7fc89806ace0 ip 00007fc8aa487863 sp 00007ffcbdb42380 error 4 in libQt5Gui.so.5.6.1[7fc8aa2ff000+56a000]
[104482.315619] dde-control-cen[29359]: segfault at 7f01fc1aace0 ip 00007f022198c863 sp 00007ffe40fc93b0 error 4 in libQt5Gui.so.5.6.1[7f0221804000+56a000]
[104483.311903] chrome[32663]: segfault at 968 ip 00007f547d99bed3 sp 00007ffee997a950 error 4 in libX11.so.6.3.0[7f547d96e000+13a000]
[104854.309947] /dev/vmmon[2762]: PTSC: initialized at 2491905000 Hz using TSC, TSCs are synchronized.
[104856.077320] /dev/vmnet: open called by PID 2788 (vmx-vcpu-0)
[104856.077346] /dev/vmnet: port on hub 0 successfully opened
[104856.077362] /dev/vmnet: open called by PID 2788 (vmx-vcpu-0)
[104856.077371] /dev/vmnet: port on hub 0 successfully opened
[129634.759031] wlp3s0: deauthenticating from 88:25:93:af:a0:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[129634.791717] bridge-wlp3s0: disabling the bridge
[129634.827471] bridge-wlp3s0: down
[129634.827481] bridge-wlp3s0: detached
[129634.954357] userif-3: sent link down event.
[129634.954360] userif-3: sent link up event.
[129640.587642] PM: Syncing filesystems ... done.
[129640.984938] PM: Preparing system for sleep (mem)
[129640.991061] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[129640.991123] Freezing user space processes ... (elapsed 0.002 seconds) done.
[129640.994077] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[129640.995446] PM: Suspending system (mem)
[129640.995471] Suspending console(s) (use no_console_suspend to debug)
[129640.996021] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[129640.997103] sd 2:0:0:0: [sdb] Stopping disk
[129641.172042] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[129641.181214] sd 0:0:0:0: [sda] Stopping disk
[129641.259731] ACPI : EC: event blocked
[129641.260864] e1000e: EEE TX LPI TIMER: 00000011
[129641.683360] PM: suspend of devices complete after 687.727 msecs
[129641.702252] PM: late suspend of devices complete after 18.871 msecs
[129641.702764] ACPI : EC: interrupt blocked
[129641.706653] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[129641.706654] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[129641.706925] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[129641.707066] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[129641.746037] PM: noirq suspend of devices complete after 43.777 msecs
[129641.746699] ACPI: Preparing to enter system sleep state S3
[129641.754819] ACPI : EC: EC stopped
[129641.754820] PM: Saving platform NVS memory
[129641.754846] Disabling non-boot CPUs ...
[129641.778639] Broke affinity for irq 16
[129641.778655] Broke affinity for irq 23
[129641.778659] Broke affinity for irq 27
[129641.778662] Broke affinity for irq 29
[129641.778664] Broke affinity for irq 30
[129641.778666] Broke affinity for irq 31
[129641.778671] Broke affinity for irq 33
[129641.779700] smpboot: CPU 1 is now offline
[129641.818332] Broke affinity for irq 16
[129641.818340] Broke affinity for irq 23
[129641.818344] Broke affinity for irq 27
[129641.818348] Broke affinity for irq 29
[129641.818350] Broke affinity for irq 30
[129641.818353] Broke affinity for irq 31
[129641.818356] Broke affinity for irq 33
[129641.818359] Broke affinity for irq 35
[129641.819648] smpboot: CPU 2 is now offline
[129641.842511] Broke affinity for irq 1
[129641.842516] Broke affinity for irq 8
[129641.842519] Broke affinity for irq 9
[129641.842523] Broke affinity for irq 12
[129641.842527] Broke affinity for irq 16
[129641.842531] Broke affinity for irq 18
[129641.842536] Broke affinity for irq 23
[129641.842540] Broke affinity for irq 27
[129641.842543] Broke affinity for irq 28
[129641.842546] Broke affinity for irq 29
[129641.842548] Broke affinity for irq 30
[129641.842551] Broke affinity for irq 31
[129641.842554] Broke affinity for irq 32
[129641.842558] Broke affinity for irq 33
[129641.842561] Broke affinity for irq 35
[129641.843601] smpboot: CPU 3 is now offline
[129641.847214] ACPI: Low-level resume complete
[129641.847260] ACPI : EC: EC started
[129641.847260] PM: Restoring platform NVS memory
[129641.847552] Suspended for 50439.015 seconds
[129641.847642] Enabling non-boot CPUs ...
[129641.848741] x86: Booting SMP configuration:
[129641.848742] smpboot: Booting Node 0 Processor 1 APIC 0x1
[129641.849008] Disabled fast string operations
[129641.851175]  cache: parent cpu1 should not be sleeping
[129641.857258] CPU1 is up
[129641.858344] smpboot: Booting Node 0 Processor 2 APIC 0x2
[129641.858589] Disabled fast string operations
[129641.860742]  cache: parent cpu2 should not be sleeping
[129641.866686] CPU2 is up
[129641.867803] smpboot: Booting Node 0 Processor 3 APIC 0x3
[129641.868046] Disabled fast string operations
[129641.870224]  cache: parent cpu3 should not be sleeping
[129641.875922] CPU3 is up
[129641.878882] ACPI: Waking up from system sleep state S3
[129641.897256] ACPI : EC: interrupt unblocked
[129641.939865] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[129641.947627] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[129641.947654] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
[129641.947689] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[129641.947731] PM: noirq resume of devices complete after 50.657 msecs
[129641.948048] PM: early resume of devices complete after 0.288 msecs
[129641.948079] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[129641.948156] ACPI : EC: event unblocked
[129641.948409] usb usb1: root hub lost power or was reset
[129641.948411] usb usb2: root hub lost power or was reset
[129641.948564] rtc_cmos 00:02: System wakeup disabled by ACPI
[129641.950004] sd 0:0:0:0: [sda] Starting disk
[129641.950004] sd 2:0:0:0: [sdb] Starting disk
[129642.195541] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[129642.207521] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445243915607429418 new 18445243865168413679 attempts 1
[129642.298059] ata2: SATA link down (SStatus 0 SControl 300)
[129642.298108] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[129642.298227] ata5: SATA link down (SStatus 0 SControl 300)
[129642.298599] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129642.298602] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129642.298603] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129642.300577] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129642.300583] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129642.300587] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129642.301815] ata3.00: configured for UDMA/133
[129642.383532] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[129642.752978] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[129643.915565] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[129644.239788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129644.239792] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129644.239793] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129644.297197] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129644.297200] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129644.297201] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129644.323699] ata1.00: configured for UDMA/133
[129644.900789] PM: resume of devices complete after 2952.825 msecs
[129644.900904] usb 3-1.4:1.0: rebind failed: -517
[129644.900906] usb 3-1.4:1.1: rebind failed: -517
[129644.901106] PM: Finishing wakeup.
[129644.901107] Restarting tasks ... 
[129644.901199] usb 1-1: USB disconnect, device number 2
[129644.924981] done.
[129644.983458] usb 4-1.2: new low-speed USB device number 5 using ehci-pci
[129645.095730] usb 4-1.2: New USB device found, idVendor=0461, idProduct=4d0f
[129645.095733] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[129645.095734] usb 4-1.2: Product: USB Optical Mouse
[129645.095736] usb 4-1.2: Manufacturer: PixArt
[129645.098992] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:0461:4D0F.0007/input/input24
[129645.099136] hid-generic 0003:0461:4D0F.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[129645.334868] e1000e: enp0s25 NIC Link is Down
[129645.344335] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129645.346505] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[129645.346755] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[129645.346853] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[129645.633590] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[129645.633837] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[129645.633935] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[129645.721149] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129645.724140] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[129645.943834] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[129646.029306] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129652.153763] wlp3s0: authenticate with 88:25:93:af:a0:b4
[129652.159183] wlp3s0: send auth to 88:25:93:af:a0:b4 (try 1/3)
[129652.161420] wlp3s0: authenticated
[129652.163249] wlp3s0: associate with 88:25:93:af:a0:b4 (try 1/3)
[129652.177728] wlp3s0: RX AssocResp from 88:25:93:af:a0:b4 (capab=0x431 status=0 aid=5)
[129652.203757] wlp3s0: associated
[129652.203849] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[129653.192791] /dev/vmnet: open called by PID 1493 (vmnet-bridge)
[129653.192809] /dev/vmnet: port on hub 0 successfully opened
[129653.192818] bridge-wlp3s0: device is wireless, enabling SMAC
[129653.192826] bridge-wlp3s0: up
[129653.192830] bridge-wlp3s0: attached
[129653.392854] userif-3: sent link down event.
[129653.392857] userif-3: sent link up event.
[129656.999098] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[129657.141994] usb 1-1: New USB device found, idVendor=0fce, idProduct=e166
[129657.142003] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[129657.142006] usb 1-1: Product: Android
[129657.142009] usb 1-1: Manufacturer: Android
[129657.142012] usb 1-1: SerialNumber: BX902PBGGE
[129657.171021] usb-storage 1-1:1.0: USB Mass Storage device detected
[129657.171208] scsi host6: usb-storage 1-1:1.0
[129657.171336] usbcore: registered new interface driver usb-storage
[129657.176878] usbcore: registered new interface driver uas
[129658.181888] scsi 6:0:0:0: Direct-Access     SEMC     Mass Storage     0100 PQ: 0 ANSI: 4
[129658.183698] sd 6:0:0:0: Attached scsi generic sg2 type 0
[129658.184038] sd 6:0:0:0: [sdc] Attached SCSI removable disk
