[    0.000000] Linux version 4.9.0-deepin5-amd64 (yangbo@deepin.com) (gcc version 6.2.0 20161103 (Debian 6.2.0-11) ) #1 SMP PREEMPT Deepin 4.9.8-5 (2017-05-02) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin5-amd64 root=UUID=ffbef23a-61ec-46d7-8020-8d8ec253be53 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a9388fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a9389000-0x00000000a958afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a958b000-0x00000000b927ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9280000-0x00000000baeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 270E5G/270E5U/NP270E5G-X07CN, BIOS P02RCJ 10/29/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23F800000 mask FFF800000 uncachable
[    0.000000]   8 base 23F600000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8fcc400f0100]
[    0.000000] Base memory trampoline at [ffff8fcc40097000] 97000 size 24576
[    0.000000] BRK [0x16231f000, 0x16231ffff] PGTABLE
[    0.000000] BRK [0x162320000, 0x162320fff] PGTABLE
[    0.000000] BRK [0x162321000, 0x162321fff] PGTABLE
[    0.000000] BRK [0x162322000, 0x162322fff] PGTABLE
[    0.000000] BRK [0x162323000, 0x162323fff] PGTABLE
[    0.000000] BRK [0x162324000, 0x162324fff] PGTABLE
[    0.000000] BRK [0x162325000, 0x162325fff] PGTABLE
[    0.000000] BRK [0x162326000, 0x162326fff] PGTABLE
[    0.000000] BRK [0x162327000, 0x162327fff] PGTABLE
[    0.000000] BRK [0x162328000, 0x162328fff] PGTABLE
[    0.000000] BRK [0x162329000, 0x162329fff] PGTABLE
[    0.000000] BRK [0x16232a000, 0x16232afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32d83000-0x356b8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000BAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000BAFF1000 00965D (v02 SECCSD IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF7C000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000BAFEA000 000064 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFE9000 0009A5 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE8000 000AD0 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 0x00000000BAF79000 000055 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000BAFE6000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFE5000 000D7C (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE4000 000773 (v01 SgRef  SgTabl   00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE3000 00027E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23f5f7000-0x23f5fbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000a9388fff]
[    0.000000]   node   0: [mem 0x00000000a958b000-0x00000000b927ffff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
[    0.000000] On node 0 totalpages: 2065434
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11770 pages used for memmap
[    0.000000]   DMA32 zone: 753278 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9389000-0xa958afff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9280000-0xbaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8fce7f200000 s103704 r8192 d31464 u262144
[    0.000000] pcpu-alloc: s103704 r8192 d31464 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2033139
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin5-amd64 root=UUID=ffbef23a-61ec-46d7-8020-8d8ec253be53 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8005676K/8261736K available (6217K kernel code, 1134K rwdata, 2852K rodata, 1340K init, 684K bss, 256060K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.384 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.76 BogoMIPS (lpj=9977536)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000047] ACPI: Core revision 20160831
[    0.006670] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.006722] Security Framework initialized
[    0.006724] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006728] AppArmor: AppArmor disabled by boot time parameter
[    0.007153] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009187] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010117] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010126] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010425] CPU: Physical Processor ID: 0
[    0.010425] CPU: Processor Core ID: 0
[    0.010430] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010431] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010434] mce: CPU supports 7 MCE banks
[    0.010442] CPU0: Thermal monitoring enabled (TM1)
[    0.010452] process: using mwait in idle threads
[    0.010454] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.010455] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.010879] Freeing SMP alternatives memory: 24K (ffffffffb106c000 - ffffffffb1072000)
[    0.014340] ftrace: allocating 25006 entries in 98 pages
[    0.025552] smpboot: Max logical packages: 4
[    0.025627] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.026075] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065763] TSC deadline timer enabled
[    0.065766] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.065770] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.065790] ... version:                3
[    0.065791] ... bit width:              48
[    0.065791] ... generic registers:      4
[    0.065792] ... value mask:             0000ffffffffffff
[    0.065792] ... max period:             00007fffffffffff
[    0.065793] ... fixed-purpose events:   3
[    0.065793] ... event mask:             000000070000000f
[    0.105985] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.145919] x86: Booting SMP configuration:
[    0.145920] .... node  #0, CPUs:      #1 #2 #3
[    0.212412] x86: Booted up 1 node, 4 CPUs
[    0.212414] smpboot: Total of 4 processors activated (19955.07 BogoMIPS)
[    0.215627] devtmpfs: initialized
[    0.215693] x86/mm: Memory block size: 128MB
[    0.218335] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[    0.218409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.218447] pinctrl core: initialized pinctrl subsystem
[    0.218554] NET: Registered protocol family 16
[    0.227275] cpuidle: using governor ladder
[    0.243285] cpuidle: using governor menu
[    0.243343] ACPI: bus type PCI registered
[    0.243344] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.243417] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.243419] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.243424] PCI: Using configuration type 1 for base access
[    0.243461] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.243680] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.243680] mtrr: probably your BIOS does not setup all CPUs.
[    0.243680] mtrr: corrected configuration.
[    0.259445] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.259662] ACPI: Added _OSI(Module Device)
[    0.259662] ACPI: Added _OSI(Processor Device)
[    0.259663] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.259664] ACPI: Added _OSI(Processor Aggregator Device)
[    0.259890] ACPI: Executed 1 blocks of module-level executable AML code
[    0.264633] ACPI: Dynamic OEM Table Load:
[    0.264641] ACPI: SSDT 0xFFFF8FCE768A9800 000784 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.264954] ACPI: Dynamic OEM Table Load:
[    0.264961] ACPI: SSDT 0xFFFF8FCE755D1400 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.265187] ACPI: Dynamic OEM Table Load:
[    0.265192] ACPI: SSDT 0xFFFF8FCE755A0A00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.265934] ACPI : EC: EC started
[    0.344576] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.344578] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.344579] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.344580] ACPI: Interpreter enabled
[    0.344600] ACPI: (supports S0 S3 S4 S5)
[    0.344601] ACPI: Using IOAPIC for interrupt routing
[    0.344626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.412910] ACPI: Power Resource [FN00] (off)
[    0.412999] ACPI: Power Resource [FN01] (off)
[    0.413085] ACPI: Power Resource [FN02] (off)
[    0.413171] ACPI: Power Resource [FN03] (off)
[    0.413257] ACPI: Power Resource [FN04] (off)
[    0.413817] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.413822] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.413958] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.414377] PCI host bridge to bus 0000:00
[    0.414379] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.414381] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.414382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.414383] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.414384] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.414391] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.414486] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.414517] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.414562] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.414604] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.414613] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.414619] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.414623] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.414734] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.414755] pci 0000:00:16.0: reg 0x10: [mem 0xf1705000-0xf170500f 64bit]
[    0.414831] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.414920] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.414938] pci 0000:00:1a.0: reg 0x10: [mem 0xf170a000-0xf170a3ff]
[    0.415023] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.415107] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.415124] pci 0000:00:1b.0: reg 0x10: [mem 0xf1700000-0xf1703fff 64bit]
[    0.415197] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.415246] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.415286] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.415362] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.415411] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.415452] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.415528] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.415577] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.415621] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.415638] pci 0000:00:1d.0: reg 0x10: [mem 0xf1709000-0xf17093ff]
[    0.415724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.415806] pci 0000:00:1f.0: [8086:1e5d] type 00 class 0x060100
[    0.415982] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.415997] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.416005] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.416012] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.416020] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.416028] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.416035] pci 0000:00:1f.2: reg 0x24: [mem 0xf1708000-0xf17087ff]
[    0.416078] pci 0000:00:1f.2: PME# supported from D3hot
[    0.416155] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.416171] pci 0000:00:1f.3: reg 0x10: [mem 0xf1704000-0xf17040ff 64bit]
[    0.416192] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.416330] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.416340] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.416349] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.416358] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.416364] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.416371] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.416487] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.428532] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.428538] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.428544] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.428550] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.428646] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.428676] pci 0000:02:00.0: reg 0x10: [mem 0xf1600000-0xf167ffff 64bit]
[    0.428739] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.428825] pci 0000:02:00.0: supports D1 D2
[    0.428826] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.428867] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.440546] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.440559] pci 0000:00:1c.0:   bridge window [mem 0xf1600000-0xf16fffff]
[    0.440708] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.440790] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.440907] pci 0000:03:00.0: reg 0x18: [mem 0xf1500000-0xf1500fff 64bit]
[    0.440977] pci 0000:03:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[    0.441348] pci 0000:03:00.0: supports D1 D2
[    0.441349] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.441493] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.452603] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.452607] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.452611] pci 0000:00:1c.3:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.452617] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.469069] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.469124] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469179] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.469231] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.469282] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469333] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.469386] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.469436] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.484903] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.484961] ACPI : EC: event unblocked
[    0.485092] ACPI : EC: 0 stale EC events cleared
[    0.485096] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.485098] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.485274] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.485275] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.485277] vgaarb: loaded
[    0.485278] vgaarb: bridge control possible 0000:00:02.0
[    0.485341] PCI: Using ACPI for IRQ routing
[    0.486888] PCI: pci_cache_line_size set to 64 bytes
[    0.486932] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.486933] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.486934] e820: reserve RAM buffer [mem 0xa9389000-0xabffffff]
[    0.486935] e820: reserve RAM buffer [mem 0xb9280000-0xbbffffff]
[    0.486936] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.486937] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.487080] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.487085] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.489108] clocksource: Switched to clocksource hpet
[    0.495818] VFS: Disk quotas dquot_6.6.0
[    0.495848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.495937] pnp: PnP ACPI init
[    0.496337] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.496338] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.496340] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.496341] system 00:00: [io  0xffff] has been reserved
[    0.496343] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.496344] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.496345] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.496347] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.496348] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.496349] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.496353] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496381] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.496433] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.496435] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.496465] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.496522] pnp 00:04: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
[    0.496645] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.496648] pnp 00:05: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[    0.496671] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.496672] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.496673] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.496675] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.496676] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.496677] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.496679] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.496680] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.496681] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.496683] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.496685] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.497154] pnp: PnP ACPI: found 6 devices
[    0.503477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.503481] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.503483] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.503510] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.503511] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.503513] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.503515] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.503517] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.503519] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.503523] pci 0000:02:00.0: BAR 6: assigned [mem 0xf1680000-0xf168ffff pref]
[    0.503524] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.503529] pci 0000:00:1c.0:   bridge window [mem 0xf1600000-0xf16fffff]
[    0.503537] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.503540] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.503545] pci 0000:00:1c.3:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.503548] pci 0000:00:1c.3:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.503555] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.503556] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.503558] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.503559] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.503560] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.503561] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.503562] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.503564] pci_bus 0000:02: resource 1 [mem 0xf1600000-0xf16fffff]
[    0.503565] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.503566] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.503567] pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.503683] NET: Registered protocol family 2
[    0.503867] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.504015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.504218] TCP: Hash tables configured (established 65536 bind 65536)
[    0.504243] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.504275] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.504352] NET: Registered protocol family 1
[    0.504367] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.504750] PCI: CLS 64 bytes, default 64
[    0.504799] Unpacking initramfs...
[    1.128030] Freeing initrd memory: 42200K (ffff8fcc72d83000 - ffff8fcc756b9000)
[    1.128034] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.128036] software IO TLB [mem 0xb5280000-0xb9280000] (64MB) mapped at [ffff8fccf5280000-ffff8fccf927ffff]
[    1.128451] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.128499] audit: initializing netlink subsys (disabled)
[    1.128516] audit: type=2000 audit(1496415524.124:1): initialized
[    1.128810] Initialise system trusted keyrings
[    1.128922] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.128965] zbud: loaded
[    1.171076] Key type asymmetric registered
[    1.171077] Asymmetric key parser 'x509' registered
[    1.171096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.171128] io scheduler noop registered
[    1.171129] io scheduler deadline registered
[    1.171141] io scheduler cfq registered (default)
[    1.171609] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.171614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.171630] intel_idle: MWAIT substates: 0x21120
[    1.171631] intel_idle: v0.4.1 model 0x3A
[    1.171783] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.171989] GHES: HEST is not enabled!
[    1.172050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.172479] Linux agpgart interface v0.103
[    1.172522] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.172522] AMD IOMMUv2 functionality not available on this system
[    1.172852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
[    1.175567] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.175577] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.175746] mousedev: PS/2 mouse device common for all mice
[    1.175933] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.175958] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.176034] ledtrig-cpu: registered to indicate activity on CPUs
[    1.176471] NET: Registered protocol family 10
[    1.176699] mip6: Mobile IPv6
[    1.176700] NET: Registered protocol family 17
[    1.176702] mpls_gso: MPLS GSO support
[    1.176878] microcode: sig=0x306a9, pf=0x10, revision=0x17
[    1.176926] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.177039] registered taskstats version 1
[    1.177041] Loading compiled-in X.509 certificates
[    1.178575] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.178840] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.178857] zswap: loaded using pool lzo/zbud
[    1.179278] rtc_cmos 00:01: setting system clock to 2017-06-02 14:58:45 UTC (1496415525)
[    1.179345] PM: Hibernation image not present or could not be loaded.
[    1.180378] Freeing unused kernel memory: 1340K (ffffffffb0f1d000 - ffffffffb106c000)
[    1.180379] Write protecting the kernel read-only data: 12288k
[    1.180859] Freeing unused kernel memory: 1960K (ffff8fcda1a16000 - ffff8fcda1c00000)
[    1.183374] Freeing unused kernel memory: 1244K (ffff8fcda1ec9000 - ffff8fcda2000000)
[    1.188694] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.201189] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.201261] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.201269] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.201279] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.201899] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.201930] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.203094] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.203146] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.203159] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.203418] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.209395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.226169] button: module verification failed: signature and/or required key missing - tainting kernel
[    1.226546] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.226575] ACPI: Lid Switch [LID0]
[    1.226650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.226654] ACPI: Power Button [PWRB]
[    1.226722] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.226725] ACPI: Power Button [PWRF]
[    1.228032] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.230173] wmi: Mapper loaded
[    1.280920] [drm] Initialized
[    1.282162] ACPI: bus type USB registered
[    1.282200] usbcore: registered new interface driver usbfs
[    1.282215] usbcore: registered new interface driver hub
[    1.282247] usbcore: registered new device driver usb
[    1.282811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.283124] ehci-pci: EHCI PCI platform driver
[    1.283465] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.283474] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.283490] ehci-pci 0000:00:1a.0: debug port 2
[    1.287413] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.287435] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf170a000
[    1.294799] SCSI subsystem initialized
[    1.297791] thermal LNXTHERM:00: registered as thermal_zone0
[    1.297793] ACPI: Thermal Zone [TZ00] (45 C)
[    1.298179] thermal LNXTHERM:01: registered as thermal_zone1
[    1.298181] ACPI: Thermal Zone [TZ01] (30 C)
[    1.301122] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.301191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.301193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.301195] usb usb1: Product: EHCI Host Controller
[    1.301196] usb usb1: Manufacturer: Linux 4.9.0-deepin5-amd64 ehci_hcd
[    1.301198] usb usb1: SerialNumber: 0000:00:1a.0
[    1.301402] hub 1-0:1.0: USB hub found
[    1.301415] hub 1-0:1.0: 3 ports detected
[    1.301678] libata version 3.00 loaded.
[    1.301822] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.301829] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.301846] ehci-pci 0000:00:1d.0: debug port 2
[    1.305753] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.305775] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1709000
[    1.318635] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.318647] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.319163] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffacd880cf5000, 24:f5:aa:c9:23:6b, XID 00a00000 IRQ 25
[    1.321121] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.321308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.321310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.321312] usb usb2: Product: EHCI Host Controller
[    1.321314] usb usb2: Manufacturer: Linux 4.9.0-deepin5-amd64 ehci_hcd
[    1.321315] usb usb2: SerialNumber: 0000:00:1d.0
[    1.321519] hub 2-0:1.0: USB hub found
[    1.321531] hub 2-0:1.0: 3 ports detected
[    1.322981] [drm] Memory usable by graphics device = 2048M
[    1.322983] [drm] Replacing VGA console driver
[    1.323532] Console: switching to colour dummy device 80x25
[    1.329184] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.329186] [drm] Driver supports precise vblank timestamp query.
[    1.331622] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.362052] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.363354] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.363708] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3b/LNXVIDEO:00/input/input6
[    1.364780] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.365021] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.365072] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.365253] ahci 0000:00:1f.2: version 3.0
[    1.375575] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.375578] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.376561] fbcon: inteldrmfb (fb0) is primary device
[    1.394268] scsi host0: ahci
[    1.398940] scsi host1: ahci
[    1.408535] scsi host2: ahci
[    1.408918] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.414104] scsi host3: ahci
[    1.414239] scsi host4: ahci
[    1.414337] scsi host5: ahci
[    1.414392] ata1: SATA max UDMA/133 abar m2048@0xf1708000 port 0xf1708100 irq 27
[    1.414393] ata2: DUMMY
[    1.414395] ata3: SATA max UDMA/133 abar m2048@0xf1708000 port 0xf1708200 irq 27
[    1.414396] ata4: DUMMY
[    1.414396] ata5: DUMMY
[    1.414397] ata6: DUMMY
[    1.629158] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.649130] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.728354] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.728376] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.732489] ata3.00: ATAPI: SlimtypeDVD A DU8A5SH, BS21, max UDMA/100
[    1.733429] ata3.00: configured for UDMA/100
[    1.758157] ata1.00: ATA-8: ST500LT012-1DG142, 0002SDM1, max UDMA/133
[    1.758159] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.777549] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.777551] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.777939] hub 1-1:1.0: USB hub found
[    1.778120] hub 1-1:1.0: 6 ports detected
[    1.797573] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.797575] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.797942] hub 2-1:1.0: USB hub found
[    1.798118] hub 2-1:1.0: 6 ports detected
[    1.892658] ata1.00: configured for UDMA/133
[    2.065120] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.145164] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.145171] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    2.168923] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[    2.174464] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3004
[    2.174465] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.183384] random: fast init done
[    2.203576] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[    2.253146] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.269719] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1874, fw id: 1662220
[    2.312653] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.353934] Console: switching to colour frame buffer device 170x48
[    2.373006] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.385468] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[    2.437592] scsi 2:0:0:0: CD-ROM            Slimtype DVD A DU8A5SH    BS21 PQ: 0 ANSI: 5
[    2.466100] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1041
[    2.466103] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.466105] usb 1-1.4: Product: WebCam SC-10HDD12636N
[    2.466106] usb 1-1.4: Manufacturer: Generic
[    2.466108] usb 1-1.4: SerialNumber: 200901010001
[    2.467727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.467734] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.467809] sd 0:0:0:0: [sda] Write Protect is off
[    2.467812] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.467838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.486234] sr 2:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.486237] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.486538] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.579105]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.579952] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.169302] clocksource: Switched to clocksource tsc
[    3.462743] md: linear personality registered for level -1
[    3.464489] md: multipath personality registered for level -4
[    3.465836] md: raid0 personality registered for level 0
[    3.467247] md: raid1 personality registered for level 1
[    3.537069] raid6: sse2x1   gen()  6829 MB/s
[    3.605056] raid6: sse2x1   xor()  5252 MB/s
[    3.673054] raid6: sse2x2   gen()  8429 MB/s
[    3.741045] raid6: sse2x2   xor()  6015 MB/s
[    3.809051] raid6: sse2x4   gen()  9945 MB/s
[    3.877038] raid6: sse2x4   xor()  7334 MB/s
[    3.877039] raid6: using algorithm sse2x4 gen() 9945 MB/s
[    3.877040] raid6: .... xor() 7334 MB/s, rmw enabled
[    3.877041] raid6: using ssse3x2 recovery algorithm
[    3.877342] xor: automatically using best checksumming function   avx       
[    3.877535] async_tx: api initialized (async)
[    3.882909] md: raid6 personality registered for level 6
[    3.882912] md: raid5 personality registered for level 5
[    3.882912] md: raid4 personality registered for level 4
[    3.886597] md: raid10 personality registered for level 10
[    4.397247] Btrfs loaded, crc32c=crc32c-intel
[    5.123210] PM: Starting manual resume from disk
[    5.123213] PM: Hibernation image partition 8:8 present
[    5.123213] PM: Looking for hibernation image.
[    5.123473] PM: Image not found (code -22)
[    5.123474] PM: Hibernation image not present or could not be loaded.
[    5.586130] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.075333] random: crng init done
[    6.823088] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.823236] systemd[1]: Detected architecture x86-64.
[    6.834058] systemd[1]: Set hostname to <albert-PC>.
[    8.204040] systemd[1]: Reached target Encrypted Volumes.
[    8.204203] systemd[1]: Listening on Journal Audit Socket.
[    8.204246] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.204376] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.204389] systemd[1]: Reached target Remote File Systems.
[    8.204424] systemd[1]: Listening on Journal Socket.
[    8.204450] systemd[1]: Listening on udev Kernel Socket.
[    8.982370] lp: driver loaded but no devices found
[    9.145341] ppdev: user-space parallel port driver
[    9.221439] bbswitch: loading out-of-tree module taints kernel.
[    9.221735] bbswitch: version 0.8
[    9.221741] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    9.221746] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    9.221758] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    9.221917] bbswitch: detected an Optimus _DSM function
[    9.221975] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    9.378286] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    9.556306] systemd-journald[863]: Received request to flush runtime journal from PID 1
[    9.897081] ACPI: AC Adapter [ADP1] (on-line)
[   10.715715] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.866387] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   10.866393] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.866396] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.866399] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.866401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.866402] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.866404] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.866406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.866406] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.866409] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.866411] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.866411] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.891346] ACPI: Battery Slot [BAT1] (battery present)
[   11.208923] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   11.249112] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.287443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.287491] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   11.521226] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   11.521228] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.521229] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.521230] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   11.650266] samsung_laptop: detected SABI interface: SwSmi@
[   11.872311] Bluetooth: Core ver 2.22
[   11.872329] NET: Registered protocol family 31
[   11.872330] Bluetooth: HCI device and connection manager initialized
[   11.872333] Bluetooth: HCI socket layer initialized
[   11.872335] Bluetooth: L2CAP socket layer initialized
[   11.872341] Bluetooth: SCO socket layer initialized
[   12.031337] media: Linux media interface: v0.10
[   12.137922] Linux video capture interface: v2.00
[   12.166485] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.166487] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.166488] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   12.166489] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.166490] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.166491] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   12.166492] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   12.175269] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.179891] usbcore: registered new interface driver btusb
[   12.224824] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.224902] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.224958] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.282924] usb 1-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu
[   12.338505] usb 1-1.3: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
[   12.343713] usbcore: registered new interface driver ath3k
[   12.396647] ath: phy0: WB335 2-ANT card detected
[   12.396649] ath: phy0: Set BT/WLAN RX diversity capability
[   12.404616] ath: phy0: Enable LNA combining
[   12.405864] ath: phy0: ASPM enabled: 0x42
[   12.405867] ath: EEPROM regdomain: 0x6a
[   12.405868] ath: EEPROM indicates we should expect a direct regpair map
[   12.405870] ath: Country alpha2 being used: 00
[   12.405870] ath: Regpair used: 0x6a
[   12.552586] usb 1-1.3: USB disconnect, device number 3
[   12.577721] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.577977] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffacd881680000, irq=16
[   12.600676] uvcvideo: Found UVC 1.00 device WebCam SC-10HDD12636N (2232:1041)
[   12.605975] uvcvideo 1-1.4:1.0: Entity type for entity Extension 5 was not initialized!
[   12.605978] uvcvideo 1-1.4:1.0: Entity type for entity Extension 2 was not initialized!
[   12.605980] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized!
[   12.605982] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[   12.606075] input: WebCam SC-10HDD12636N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[   12.606141] usbcore: registered new interface driver uvcvideo
[   12.606143] USB Video Class driver (1.1.1)
[   12.776871] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[   12.792398] iTCO_vendor_support: vendor-support=0
[   12.862929] wl: module license 'MIXED/Proprietary' taints kernel.
[   12.862930] Disabling lock debugging due to kernel taint
[   13.000885] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[   13.071949] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.072002] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   13.072132] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.113750] usb 2-1.2: New USB device found, idVendor=093a, idProduct=2510
[   13.113752] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.113753] usb 2-1.2: Product: USB Optical Mouse
[   13.113754] usb 2-1.2: Manufacturer: PixArt
[   13.274366] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   13.341734] hidraw: raw HID events driver (C) Jiri Kosina
[   13.355381] usbcore: registered new interface driver usbhid
[   13.355382] usbhid: USB HID core driver
[   13.539888] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:093A:2510.0001/input/input13
[   13.540025] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[   13.725860] intel_rapl: Found RAPL domain package
[   13.725863] intel_rapl: Found RAPL domain core
[   13.725866] intel_rapl: Found RAPL domain uncore
[   13.725876] intel_rapl: RAPL package 0 domain package locked by BIOS
[   15.575530] Adding 4066300k swap on /dev/sda8.  Priority:-1 extents:1 across:4066300k FS
[   17.763032] bbswitch: disabling discrete graphics
[   17.763044] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   17.968819] usb 1-1.3: device descriptor read/64, error -110
[   20.539015] NET: Registered protocol family 15
[   20.822137] Initializing XFRM netlink socket
[   21.902635] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.916729] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.919131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   22.347796] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8105e-1.fw
[   22.543716] r8169 0000:03:00.0 enp3s0: link down
[   22.543717] r8169 0000:03:00.0 enp3s0: link down
[   22.543765] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.374179] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3004
[   23.374181] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   24.201665] r8169 0000:03:00.0 enp3s0: link up
[   24.201689] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   24.620706] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   24.702779] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.702781] Bluetooth: BNEP filters: protocol multicast
[   24.702792] Bluetooth: BNEP socket layer initialized
[   26.505430] wlp2s0: authenticate with 58:66:ba:64:72:91
[   26.528644] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[   26.538237] wlp2s0: authenticated
[   26.540673] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[   26.667279] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[   26.667411] wlp2s0: associated
[   26.667459] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   26.671503] ath: EEPROM regdomain: 0x809c
[   26.671506] ath: EEPROM indicates we should expect a country code
[   26.671508] ath: doing EEPROM country->regdmn map search
[   26.671509] ath: country maps to regdmn code: 0x52
[   26.671510] ath: Country alpha2 being used: CN
[   26.671511] ath: Regpair used: 0x52
[   26.671514] ath: regdomain 0x809c dynamically updated by country IE
[   93.820147] fuse init (API version 7.26)
[   93.828941] Bluetooth: RFCOMM TTY layer initialized
[   93.828947] Bluetooth: RFCOMM socket layer initialized
[   93.828953] Bluetooth: RFCOMM ver 1.11
[  199.033504] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  199.046194] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  199.050650] wlp2s0: authenticated
[  199.053171] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  199.057265] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=128)
[  199.057377] wlp2s0: associated
[  199.061942] ath: EEPROM regdomain: 0x809c
[  199.061944] ath: EEPROM indicates we should expect a country code
[  199.061945] ath: doing EEPROM country->regdmn map search
[  199.061946] ath: country maps to regdmn code: 0x52
[  199.061947] ath: Country alpha2 being used: CN
[  199.061947] ath: Regpair used: 0x52
[  199.061949] ath: regdomain 0x809c dynamically updated by country IE
[  210.906951] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  210.927212] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  211.007951] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[  211.065743] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[  211.168906] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[  212.233420] wlp2s0: authenticate with 58:66:ba:64:72:91
[  212.245969] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  212.249872] wlp2s0: authenticated
[  212.252804] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[  212.260848] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[  212.261008] wlp2s0: associated
[  212.267310] ath: EEPROM regdomain: 0x809c
[  212.267312] ath: EEPROM indicates we should expect a country code
[  212.267314] ath: doing EEPROM country->regdmn map search
[  212.267315] ath: country maps to regdmn code: 0x52
[  212.267317] ath: Country alpha2 being used: CN
[  212.267318] ath: Regpair used: 0x52
[  212.267320] ath: regdomain 0x809c dynamically updated by country IE
[  224.187571] wlp2s0: deauthenticating from 58:66:ba:64:72:91 by local choice (Reason: 3=DEAUTH_LEAVING)
[  742.923293] perf: interrupt took too long (2731 > 2500), lowering kernel.perf_event_max_sample_rate to 73000
[  743.029982] perf: interrupt took too long (3430 > 3413), lowering kernel.perf_event_max_sample_rate to 58250
[  743.170013] perf: interrupt took too long (4377 > 4287), lowering kernel.perf_event_max_sample_rate to 45500
[  743.223586] perf: interrupt took too long (5634 > 5471), lowering kernel.perf_event_max_sample_rate to 35500
[  743.253962] perf: interrupt took too long (7073 > 7042), lowering kernel.perf_event_max_sample_rate to 28250
[  743.308043] perf: interrupt took too long (8845 > 8841), lowering kernel.perf_event_max_sample_rate to 22500
[  743.373469] perf: interrupt took too long (11087 > 11056), lowering kernel.perf_event_max_sample_rate to 18000
[  743.434507] perf: interrupt took too long (13895 > 13858), lowering kernel.perf_event_max_sample_rate to 14250
[  743.561529] perf: interrupt took too long (17403 > 17368), lowering kernel.perf_event_max_sample_rate to 11250
[  743.928755] perf: interrupt took too long (21874 > 21753), lowering kernel.perf_event_max_sample_rate to 9000
