[    0.000000] Linux version 4.9.0-deepin4-amd64 (yangbo@deepin.com) (gcc version 6.2.0 20161103 (Debian 6.2.0-11) ) #1 SMP PREEMPT Deepin 4.9.8-4 (2017-04-17) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=ffbef23a-61ec-46d7-8020-8d8ec253be53 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a9388fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a9389000-0x00000000a958afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a958b000-0x00000000b927ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9280000-0x00000000baeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 270E5G/270E5U/NP270E5G-X07CN, BIOS P02RCJ 10/29/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13F800000 mask FFF800000 uncachable
[    0.000000]   7 base 13F600000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9f58c00f0100]
[    0.000000] Base memory trampoline at [ffff9f58c0097000] 97000 size 24576
[    0.000000] BRK [0x125b1f000, 0x125b1ffff] PGTABLE
[    0.000000] BRK [0x125b20000, 0x125b20fff] PGTABLE
[    0.000000] BRK [0x125b21000, 0x125b21fff] PGTABLE
[    0.000000] BRK [0x125b22000, 0x125b22fff] PGTABLE
[    0.000000] BRK [0x125b23000, 0x125b23fff] PGTABLE
[    0.000000] BRK [0x125b24000, 0x125b24fff] PGTABLE
[    0.000000] BRK [0x125b25000, 0x125b25fff] PGTABLE
[    0.000000] BRK [0x125b26000, 0x125b26fff] PGTABLE
[    0.000000] BRK [0x125b27000, 0x125b27fff] PGTABLE
[    0.000000] BRK [0x125b28000, 0x125b28fff] PGTABLE
[    0.000000] BRK [0x125b29000, 0x125b29fff] PGTABLE
[    0.000000] BRK [0x125b2a000, 0x125b2afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32d83000-0x356b8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000BAFFE170 0000A4 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000BAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000BAFF1000 00965D (v02 SECCSD IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF7C000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000BAFEA000 000064 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFE9000 0009A5 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE8000 000AD0 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 0x00000000BAF79000 000055 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000BAFE6000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFE5000 000D7C (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE4000 000773 (v01 SgRef  SgTabl   00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE3000 00027E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13f5fb000-0x13f5fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000a9388fff]
[    0.000000]   node   0: [mem 0x00000000a958b000-0x00000000b927ffff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f5fffff]
[    0.000000] On node 0 totalpages: 1016858
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11770 pages used for memmap
[    0.000000]   DMA32 zone: 753278 pages, LIFO batch:31
[    0.000000]   Normal zone: 4056 pages used for memmap
[    0.000000]   Normal zone: 259584 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9389000-0xa958afff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9280000-0xbaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaeef000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9f59ff200000 s103704 r8192 d31464 u262144
[    0.000000] pcpu-alloc: s103704 r8192 d31464 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1000947
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=ffbef23a-61ec-46d7-8020-8d8ec253be53 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3876924K/4067432K available (6217K kernel code, 1134K rwdata, 2852K rodata, 1340K init, 684K bss, 190508K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.319 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.63 BogoMIPS (lpj=9977276)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000049] ACPI: Core revision 20160831
[    0.006655] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.006707] Security Framework initialized
[    0.006709] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006714] AppArmor: AppArmor disabled by boot time parameter
[    0.006935] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007988] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008487] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008493] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008774] CPU: Physical Processor ID: 0
[    0.008775] CPU: Processor Core ID: 0
[    0.008780] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008780] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008783] mce: CPU supports 7 MCE banks
[    0.008811] CPU0: Thermal monitoring enabled (TM1)
[    0.008820] process: using mwait in idle threads
[    0.008823] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008824] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009249] Freeing SMP alternatives memory: 24K (ffffffffb986c000 - ffffffffb9872000)
[    0.012780] ftrace: allocating 25005 entries in 98 pages
[    0.024026] smpboot: Max logical packages: 4
[    0.024101] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.024555] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064243] TSC deadline timer enabled
[    0.064246] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.064250] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.064271] ... version:                3
[    0.064271] ... bit width:              48
[    0.064272] ... generic registers:      4
[    0.064272] ... value mask:             0000ffffffffffff
[    0.064273] ... max period:             00007fffffffffff
[    0.064273] ... fixed-purpose events:   3
[    0.064274] ... event mask:             000000070000000f
[    0.104463] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.144398] x86: Booting SMP configuration:
[    0.144399] .... node  #0, CPUs:      #1 #2 #3
[    0.210886] x86: Booted up 1 node, 4 CPUs
[    0.210889] smpboot: Total of 4 processors activated (19954.55 BogoMIPS)
[    0.214098] devtmpfs: initialized
[    0.214164] x86/mm: Memory block size: 128MB
[    0.216391] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[    0.216462] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.216500] pinctrl core: initialized pinctrl subsystem
[    0.216608] NET: Registered protocol family 16
[    0.225812] cpuidle: using governor ladder
[    0.241822] cpuidle: using governor menu
[    0.241867] ACPI: bus type PCI registered
[    0.241882] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.241953] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.241954] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.241960] PCI: Using configuration type 1 for base access
[    0.241997] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.242163] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.242163] mtrr: probably your BIOS does not setup all CPUs.
[    0.242164] mtrr: corrected configuration.
[    0.257987] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.258205] ACPI: Added _OSI(Module Device)
[    0.258206] ACPI: Added _OSI(Processor Device)
[    0.258207] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.258207] ACPI: Added _OSI(Processor Aggregator Device)
[    0.258431] ACPI: Executed 1 blocks of module-level executable AML code
[    0.267765] ACPI: Dynamic OEM Table Load:
[    0.267773] ACPI: SSDT 0xFFFF9F59FA8A9800 000784 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.268086] ACPI: Dynamic OEM Table Load:
[    0.268092] ACPI: SSDT 0xFFFF9F59F9F9D000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.268318] ACPI: Dynamic OEM Table Load:
[    0.268323] ACPI: SSDT 0xFFFF9F59F9F62A00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.269062] ACPI : EC: EC started
[    0.347057] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.347059] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.347060] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.347060] ACPI: Interpreter enabled
[    0.347080] ACPI: (supports S0 S3 S4 S5)
[    0.347081] ACPI: Using IOAPIC for interrupt routing
[    0.347106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.414345] ACPI: Power Resource [FN00] (off)
[    0.414433] ACPI: Power Resource [FN01] (off)
[    0.414518] ACPI: Power Resource [FN02] (off)
[    0.414606] ACPI: Power Resource [FN03] (off)
[    0.414690] ACPI: Power Resource [FN04] (off)
[    0.415256] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.415261] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.415396] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.415816] PCI host bridge to bus 0000:00
[    0.415818] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.415819] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.415821] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.415822] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.415823] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.415830] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.415923] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.415955] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.415999] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.416040] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.416049] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.416055] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.416059] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.416170] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.416190] pci 0000:00:16.0: reg 0x10: [mem 0xf1705000-0xf170500f 64bit]
[    0.416266] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.416354] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.416372] pci 0000:00:1a.0: reg 0x10: [mem 0xf170a000-0xf170a3ff]
[    0.416456] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.416541] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.416556] pci 0000:00:1b.0: reg 0x10: [mem 0xf1700000-0xf1703fff 64bit]
[    0.416629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.416679] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.416719] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.416797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.416846] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.416893] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.416911] pci 0000:00:1d.0: reg 0x10: [mem 0xf1709000-0xf17093ff]
[    0.416996] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.417079] pci 0000:00:1f.0: [8086:1e5d] type 00 class 0x060100
[    0.417255] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.417270] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.417276] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.417284] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.417292] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.417300] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.417307] pci 0000:00:1f.2: reg 0x24: [mem 0xf1708000-0xf17087ff]
[    0.417349] pci 0000:00:1f.2: PME# supported from D3hot
[    0.417426] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.417442] pci 0000:00:1f.3: reg 0x10: [mem 0xf1704000-0xf17040ff 64bit]
[    0.417463] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.417598] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.417608] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.417618] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.417627] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.417633] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.417639] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.417755] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.425973] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.425977] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.425980] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.425985] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.426085] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.426115] pci 0000:02:00.0: reg 0x10: [mem 0xf1600000-0xf167ffff 64bit]
[    0.426178] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.426264] pci 0000:02:00.0: supports D1 D2
[    0.426265] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.426306] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.437988] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.437998] pci 0000:00:1c.0:   bridge window [mem 0xf1600000-0xf16fffff]
[    0.454501] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.454554] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.454607] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.454659] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.454709] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.454761] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.454813] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.454866] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.470337] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.470399] ACPI : EC: event unblocked
[    0.470532] ACPI : EC: 0 stale EC events cleared
[    0.470537] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.470539] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.470710] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.470711] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.470713] vgaarb: loaded
[    0.470713] vgaarb: bridge control possible 0000:00:02.0
[    0.470771] PCI: Using ACPI for IRQ routing
[    0.472343] PCI: pci_cache_line_size set to 64 bytes
[    0.472378] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.472380] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.472381] e820: reserve RAM buffer [mem 0xa9389000-0xabffffff]
[    0.472381] e820: reserve RAM buffer [mem 0xb9280000-0xbbffffff]
[    0.472382] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.472383] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[    0.472533] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.472537] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.474561] clocksource: Switched to clocksource hpet
[    0.481307] VFS: Disk quotas dquot_6.6.0
[    0.481338] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.481429] pnp: PnP ACPI init
[    0.482121] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.482123] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.482124] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.482125] system 00:00: [io  0xffff] has been reserved
[    0.482127] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.482128] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.482130] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.482131] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.482132] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.482134] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.482138] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482167] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.482216] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.482218] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.482248] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.482303] pnp 00:04: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
[    0.482422] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.482424] pnp 00:05: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[    0.482446] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.482448] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.482449] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.482450] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.482452] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.482453] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.482454] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.482455] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.482457] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.482458] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.482460] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482937] pnp: PnP ACPI: found 6 devices
[    0.489264] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.489268] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.489270] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.489291] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.489293] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.489295] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.489296] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.489299] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.489301] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.489305] pci 0000:02:00.0: BAR 6: assigned [mem 0xf1680000-0xf168ffff pref]
[    0.489306] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.489311] pci 0000:00:1c.0:   bridge window [mem 0xf1600000-0xf16fffff]
[    0.489320] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.489321] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.489322] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.489323] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.489325] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.489326] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.489327] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.489328] pci_bus 0000:02: resource 1 [mem 0xf1600000-0xf16fffff]
[    0.489442] NET: Registered protocol family 2
[    0.489620] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.489700] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.489810] TCP: Hash tables configured (established 32768 bind 32768)
[    0.489833] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.489849] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.489910] NET: Registered protocol family 1
[    0.489924] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.490287] PCI: CLS 64 bytes, default 64
[    0.490337] Unpacking initramfs...
[    1.114551] Freeing initrd memory: 42200K (ffff9f58f2d83000 - ffff9f58f56b9000)
[    1.114554] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.114556] software IO TLB [mem 0xb5280000-0xb9280000] (64MB) mapped at [ffff9f5975280000-ffff9f597927ffff]
[    1.115001] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.115050] audit: initializing netlink subsys (disabled)
[    1.115069] audit: type=2000 audit(1496156865.116:1): initialized
[    1.115363] Initialise system trusted keyrings
[    1.115474] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.115515] zbud: loaded
[    1.157467] Key type asymmetric registered
[    1.157468] Asymmetric key parser 'x509' registered
[    1.157488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.157520] io scheduler noop registered
[    1.157521] io scheduler deadline registered
[    1.157533] io scheduler cfq registered (default)
[    1.157882] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.157887] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.157900] intel_idle: MWAIT substates: 0x21120
[    1.157901] intel_idle: v0.4.1 model 0x3A
[    1.158054] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.158241] GHES: HEST is not enabled!
[    1.158296] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.158731] Linux agpgart interface v0.103
[    1.158771] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.158771] AMD IOMMUv2 functionality not available on this system
[    1.159092] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
[    1.162831] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.162841] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.162929] mousedev: PS/2 mouse device common for all mice
[    1.163089] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.163116] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.163124] intel_pstate: Intel P-state driver initializing
[    1.163312] ledtrig-cpu: registered to indicate activity on CPUs
[    1.164140] NET: Registered protocol family 10
[    1.164601] mip6: Mobile IPv6
[    1.164605] NET: Registered protocol family 17
[    1.164611] mpls_gso: MPLS GSO support
[    1.164980] microcode: sig=0x306a9, pf=0x10, revision=0x17
[    1.165096] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.165335] registered taskstats version 1
[    1.165338] Loading compiled-in X.509 certificates
[    1.167900] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.168432] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.168463] zswap: loaded using pool lzo/zbud
[    1.169145] rtc_cmos 00:01: setting system clock to 2017-05-30 15:07:45 UTC (1496156865)
[    1.169271] PM: Hibernation image not present or could not be loaded.
[    1.171350] Freeing unused kernel memory: 1340K (ffffffffb971d000 - ffffffffb986c000)
[    1.171352] Write protecting the kernel read-only data: 12288k
[    1.172322] Freeing unused kernel memory: 1960K (ffff9f59e5216000 - ffff9f59e5400000)
[    1.177598] Freeing unused kernel memory: 1244K (ffff9f59e56c9000 - ffff9f59e5800000)
[    1.188597] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.200794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.211142] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.211254] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.211268] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.211283] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.212425] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.212473] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.214351] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.214438] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.214460] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.214944] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.243752] button: module verification failed: signature and/or required key missing - tainting kernel
[    1.244160] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    1.244189] ACPI: Lid Switch [LID0]
[    1.244268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    1.244272] ACPI: Power Button [PWRB]
[    1.244346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.244349] ACPI: Power Button [PWRF]
[    1.246257] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.249245] wmi: Mapper loaded
[    1.291231] ACPI: bus type USB registered
[    1.291272] usbcore: registered new interface driver usbfs
[    1.291286] usbcore: registered new interface driver hub
[    1.291319] usbcore: registered new device driver usb
[    1.292342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.292400] [drm] Initialized
[    1.292601] ehci-pci: EHCI PCI platform driver
[    1.292928] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.292935] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.292949] ehci-pci 0000:00:1a.0: debug port 2
[    1.292973] thermal LNXTHERM:00: registered as thermal_zone0
[    1.292975] ACPI: Thermal Zone [TZ00] (62 C)
[    1.293332] thermal LNXTHERM:01: registered as thermal_zone1
[    1.293333] ACPI: Thermal Zone [TZ01] (30 C)
[    1.296853] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.296875] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf170a000
[    1.301607] SCSI subsystem initialized
[    1.305559] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    1.305697] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    1.305816] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.305820] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.306032] nouveau 0000:01:00.0: NVIDIA GF117 (0d7000a2)
[    1.308080] libata version 3.00 loaded.
[    1.310596] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.310672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.310674] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.310676] usb usb1: Product: EHCI Host Controller
[    1.310677] usb usb1: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.310678] usb usb1: SerialNumber: 0000:00:1a.0
[    1.313269] hub 1-0:1.0: USB hub found
[    1.313280] hub 1-0:1.0: 3 ports detected
[    1.313633] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.313640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.313655] ehci-pci 0000:00:1d.0: debug port 2
[    1.317575] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.317596] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1709000
[    1.330596] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.330678] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.330680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330681] usb usb2: Product: EHCI Host Controller
[    1.330683] usb usb2: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.330684] usb usb2: SerialNumber: 0000:00:1d.0
[    1.333406] hub 2-0:1.0: USB hub found
[    1.333417] hub 2-0:1.0: 3 ports detected
[    1.334245] [drm] Memory usable by graphics device = 2048M
[    1.334246] [drm] Replacing VGA console driver
[    1.334828] Console: switching to colour dummy device 80x25
[    1.358639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.358640] [drm] Driver supports precise vblank timestamp query.
[    1.370061] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.392080] nouveau 0000:01:00.0: bios: version 75.17.68.00.05
[    1.475545] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.511936] vga_switcheroo: enabled
[    1.512027] [TTM] Zone  kernel: Available graphics memory: 1961846 kiB
[    1.512028] [TTM] Initializing pool allocator
[    1.512034] [TTM] Initializing DMA pool allocator
[    1.512059] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    1.512060] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.512063] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.512064] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.512065] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    1.579763] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    1.579776] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.581774] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.582940] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.583185] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3b/LNXVIDEO:00/input/input7
[    1.583858] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.584081] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.584118] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.584246] ahci 0000:00:1f.2: version 3.0
[    1.587429] fbcon: inteldrmfb (fb0) is primary device
[    1.594691] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.594694] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.607516] scsi host0: ahci
[    1.607710] scsi host1: ahci
[    1.607881] scsi host2: ahci
[    1.608006] scsi host3: ahci
[    1.608132] scsi host4: ahci
[    1.608277] scsi host5: ahci
[    1.608351] ata1: SATA max UDMA/133 abar m2048@0xf1708000 port 0xf1708100 irq 27
[    1.608352] ata2: DUMMY
[    1.608355] ata3: SATA max UDMA/133 abar m2048@0xf1708000 port 0xf1708200 irq 27
[    1.608356] ata4: DUMMY
[    1.608357] ata5: DUMMY
[    1.608357] ata6: DUMMY
[    1.638655] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.658647] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.787411] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.787414] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.787918] hub 1-1:1.0: USB hub found
[    1.788076] hub 1-1:1.0: 6 ports detected
[    1.807423] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.807425] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.807965] hub 2-1:1.0: USB hub found
[    1.808081] hub 2-1:1.0: 6 ports detected
[    1.921919] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.921945] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.925944] ata3.00: ATAPI: SlimtypeDVD A DU8A5SH, BS21, max UDMA/100
[    1.926875] ata3.00: configured for UDMA/100
[    1.951751] ata1.00: ATA-8: ST500LT012-1DG142, 0002SDM1, max UDMA/133
[    1.951754] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.074644] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.081602] ata1.00: configured for UDMA/133
[    2.094656] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    2.115107] random: fast init done
[    2.138634] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.138644] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    2.184068] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3004
[    2.184071] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.197375] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[    2.207298] usb 2-1.2: New USB device found, idVendor=093a, idProduct=2510
[    2.207301] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.207303] usb 2-1.2: Product: USB Optical Mouse
[    2.207305] usb 2-1.2: Manufacturer: PixArt
[    2.212263] hidraw: raw HID events driver (C) Jiri Kosina
[    2.215009] usbcore: registered new interface driver usbhid
[    2.215010] usbhid: USB HID core driver
[    2.217206] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:093A:2510.0001/input/input9
[    2.217369] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.231351] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[    2.262652] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.297270] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1874, fw id: 1662220
[    2.339127] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.475927] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1041
[    2.475930] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.475932] usb 1-1.4: Product: WebCam SC-10HDD12636N
[    2.475934] usb 1-1.4: Manufacturer: Generic
[    2.475936] usb 1-1.4: SerialNumber: 200901010001
[    2.601937] Console: switching to colour frame buffer device 170x48
[    2.623052] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.639231] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[    2.675380] scsi 2:0:0:0: CD-ROM            Slimtype DVD A DU8A5SH    BS21 PQ: 0 ANSI: 5
[    2.716755] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.716758] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.717148] sd 0:0:0:0: [sda] Write Protect is off
[    2.717153] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.717188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.736125] sr 2:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.736128] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.736442] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.858291]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    2.859784] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.162809] clocksource: Switched to clocksource tsc
[    3.824423] md: linear personality registered for level -1
[    3.826878] md: multipath personality registered for level -4
[    3.829020] md: raid0 personality registered for level 0
[    3.830909] md: raid1 personality registered for level 1
[    3.898621] raid6: sse2x1   gen()  5098 MB/s
[    3.966606] raid6: sse2x1   xor()  3040 MB/s
[    4.034586] raid6: sse2x2   gen()  5019 MB/s
[    4.102586] raid6: sse2x2   xor()  4934 MB/s
[    4.170591] raid6: sse2x4   gen() 10403 MB/s
[    4.238587] raid6: sse2x4   xor()  8960 MB/s
[    4.238588] raid6: using algorithm sse2x4 gen() 10403 MB/s
[    4.238589] raid6: .... xor() 8960 MB/s, rmw enabled
[    4.238590] raid6: using ssse3x2 recovery algorithm
[    4.238870] xor: automatically using best checksumming function   avx       
[    4.239038] async_tx: api initialized (async)
[    4.244567] md: raid6 personality registered for level 6
[    4.244568] md: raid5 personality registered for level 5
[    4.244569] md: raid4 personality registered for level 4
[    4.248918] md: raid10 personality registered for level 10
[    4.678316] Btrfs loaded, crc32c=crc32c-intel
[    5.744427] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.342361] random: crng init done
[    6.892360] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.892541] systemd[1]: Detected architecture x86-64.
[    6.902557] systemd[1]: Set hostname to <albert-PC>.
[    8.218123] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.218296] systemd[1]: Reached target Encrypted Volumes.
[    8.218584] systemd[1]: Created slice System Slice.
[    8.218858] systemd[1]: Created slice User and Session Slice.
[    8.218894] systemd[1]: Reached target Remote File Systems.
[    8.218920] systemd[1]: Reached target Slices.
[    8.219034] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.827621] lp: driver loaded but no devices found
[    8.879812] ppdev: user-space parallel port driver
[    9.148476] bbswitch: loading out-of-tree module taints kernel.
[    9.148838] bbswitch: version 0.8
[    9.148844] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    9.148850] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    9.148864] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    9.149023] bbswitch: detected an Optimus _DSM function
[    9.149033] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    9.194942] livepatch: enabling patch 'block_sogou'
[    9.724262] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    9.946655] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    9.946836] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    9.946844] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    9.947008] nouveau 0000:01:00.0: DRM: evicting buffers...
[    9.947011] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    9.947088] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    9.947288] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    9.982680] systemd-journald[835]: Received request to flush runtime journal from PID 1
[   10.159053] ACPI: AC Adapter [ADP1] (on-line)
[   10.486183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.523163] ACPI: Battery Slot [BAT1] (battery present)
[   10.533770] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   10.533779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.533782] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.533792] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.533797] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.533798] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.533802] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.533806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.533807] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.533811] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[   10.533815] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.533816] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.620495] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.656316] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   10.850848] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.850905] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   10.961209] samsung_laptop: detected SABI interface: SwSmi@
[   11.011940] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.011943] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.011944] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.011945] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.011945] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.011947] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.011948] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.028907] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.085738] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.085797] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.085847] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.088346] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   11.088348] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.088349] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.088350] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   11.446723] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   11.548847] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   11.584754] media: Linux media interface: v0.10
[   11.612587] ath: phy0: WB335 2-ANT card detected
[   11.612589] ath: phy0: Set BT/WLAN RX diversity capability
[   11.620520] ath: phy0: Enable LNA combining
[   11.621752] ath: phy0: ASPM enabled: 0x42
[   11.621754] ath: EEPROM regdomain: 0x6a
[   11.621754] ath: EEPROM indicates we should expect a direct regpair map
[   11.621756] ath: Country alpha2 being used: 00
[   11.621756] ath: Regpair used: 0x6a
[   11.665713] Bluetooth: Core ver 2.22
[   11.665734] NET: Registered protocol family 31
[   11.665735] Bluetooth: HCI device and connection manager initialized
[   11.665740] Bluetooth: HCI socket layer initialized
[   11.665743] Bluetooth: L2CAP socket layer initialized
[   11.665752] Bluetooth: SCO socket layer initialized
[   11.683680] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.683923] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc00ac1500000, irq=16
[   11.705556] Linux video capture interface: v2.00
[   11.784864] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.784868] Disabling lock debugging due to kernel taint
[   11.812335] usbcore: registered new interface driver btusb
[   11.872507] iTCO_vendor_support: vendor-support=0
[   11.884470] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.884510] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   11.884600] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.053165] uvcvideo: Found UVC 1.00 device WebCam SC-10HDD12636N (2232:1041)
[   12.058502] uvcvideo 1-1.4:1.0: Entity type for entity Extension 5 was not initialized!
[   12.058506] uvcvideo 1-1.4:1.0: Entity type for entity Extension 2 was not initialized!
[   12.058508] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized!
[   12.058510] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[   12.058613] input: WebCam SC-10HDD12636N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[   12.058705] usbcore: registered new interface driver uvcvideo
[   12.058706] USB Video Class driver (1.1.1)
[   12.151887] usb 1-1.3: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
[   12.157119] usbcore: registered new interface driver ath3k
[   12.196010] intel_rapl: Found RAPL domain package
[   12.196015] intel_rapl: Found RAPL domain core
[   12.196018] intel_rapl: Found RAPL domain uncore
[   12.196026] intel_rapl: RAPL package 0 domain package locked by BIOS
[   12.200163] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   12.306154] usb 1-1.3: USB disconnect, device number 3
[   12.526676] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[   14.408282] Adding 4066300k swap on /dev/sda8.  Priority:-1 extents:1 across:4066300k FS
[   16.858767] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   16.858933] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   16.858938] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   16.859074] nouveau 0000:01:00.0: DRM: evicting buffers...
[   16.859077] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   16.859110] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   16.859315] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   17.706706] usb 1-1.3: device descriptor read/64, error -110
[   18.368011] NET: Registered protocol family 15
[   18.436885] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.449071] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.458862] Initializing XFRM netlink socket
[   19.686399] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.878840] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   19.981827] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   21.580184] wlp2s0: authenticate with 58:66:ba:64:72:91
[   21.598776] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[   21.601720] wlp2s0: authenticated
[   21.602744] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[   21.606928] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[   21.607061] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   21.607218] wlp2s0: associated
[   21.612808] ath: EEPROM regdomain: 0x809c
[   21.612811] ath: EEPROM indicates we should expect a country code
[   21.612812] ath: doing EEPROM country->regdmn map search
[   21.612813] ath: country maps to regdmn code: 0x52
[   21.612815] ath: Country alpha2 being used: CN
[   21.612816] ath: Regpair used: 0x52
[   21.612817] ath: regdomain 0x809c dynamically updated by country IE
[   22.908037] nouveau 0000:01:00.0: bus: MMIO write of ffffff1f FAULT at 6013d4 [ IBUS ]
[   23.116074] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3004
[   23.116078] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   23.819289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.819292] Bluetooth: BNEP filters: protocol multicast
[   23.819298] Bluetooth: BNEP socket layer initialized
[   25.901069] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[   25.918831] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[   25.953323] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[   26.012586] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[   26.092155] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[   27.164630] wlp2s0: authenticate with 58:66:ba:64:72:91
[   27.181132] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[   27.242571] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[   27.282014] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[   27.361229] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[   27.932328] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[   27.946764] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[   28.005961] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[   28.098559] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[   28.148508] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[   28.890851] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   28.891111] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   28.891119] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   28.891288] nouveau 0000:01:00.0: DRM: evicting buffers...
[   28.905729] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   28.905761] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   28.906060] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   29.619838] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[   29.636950] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[   29.641189] wlp2s0: authenticated
[   29.642765] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[   29.647985] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=127)
[   29.648188] wlp2s0: associated
[   29.651276] ath: EEPROM regdomain: 0x809c
[   29.651278] ath: EEPROM indicates we should expect a country code
[   29.651278] ath: doing EEPROM country->regdmn map search
[   29.651279] ath: country maps to regdmn code: 0x52
[   29.651280] ath: Country alpha2 being used: CN
[   29.651280] ath: Regpair used: 0x52
[   29.651281] ath: regdomain 0x809c dynamically updated by country IE
[   38.226908] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   38.341376] nouveau 0000:01:00.0: bus: MMIO write of ffff9f1f FAULT at 6013d4 [ IBUS ]
[   38.341681] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   39.076831] Bluetooth: RFCOMM TTY layer initialized
[   39.076837] Bluetooth: RFCOMM socket layer initialized
[   39.076844] Bluetooth: RFCOMM ver 1.11
[   39.089621] fuse init (API version 7.26)
[   43.994900] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   43.995158] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   43.995168] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   43.995411] nouveau 0000:01:00.0: DRM: evicting buffers...
[   43.995416] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   43.995462] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   43.995749] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   50.135018] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   50.249634] nouveau 0000:01:00.0: bus: MMIO write of ffffff1f FAULT at 6013d4 [ IBUS ]
[   50.249922] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   56.026911] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   56.027001] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   56.027004] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   56.027070] nouveau 0000:01:00.0: DRM: evicting buffers...
[   56.027071] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   56.027111] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   56.027371] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   68.037962] wlp2s0: deauthenticating from 38:22:d6:4c:b7:b1 by local choice (Reason: 3=DEAUTH_LEAVING)
[   81.904275] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[   81.922086] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[   81.983945] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[   82.051029] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[   82.119441] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[   83.184660] wlp2s0: authenticate with 58:66:ba:64:72:91
[   83.202282] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[   83.205127] wlp2s0: authenticated
[   83.207126] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[   83.222109] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[   83.222258] wlp2s0: associated
[   83.226127] ath: EEPROM regdomain: 0x809c
[   83.226129] ath: EEPROM indicates we should expect a country code
[   83.226130] ath: doing EEPROM country->regdmn map search
[   83.226131] ath: country maps to regdmn code: 0x52
[   83.226132] ath: Country alpha2 being used: CN
[   83.226133] ath: Regpair used: 0x52
[   83.226134] ath: regdomain 0x809c dynamically updated by country IE
[  121.896557] wlp2s0: authenticate with 58:66:ba:64:72:91
[  121.919338] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  121.970522] wlp2s0: authenticated
[  121.971286] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[  122.128556] wlp2s0: associate with 58:66:ba:64:72:91 (try 2/3)
[  122.272002] wlp2s0: associate with 58:66:ba:64:72:91 (try 3/3)
[  122.488124] wlp2s0: association with 58:66:ba:64:72:91 timed out
[  123.052310] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  123.065114] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  123.067730] wlp2s0: authenticated
[  123.071279] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  123.175278] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 2/3)
[  123.274385] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 3/3)
[  123.349690] wlp2s0: association with 38:22:d6:4c:b7:b1 timed out
[  124.812733] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  124.830690] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  124.965950] wlp2s0: authenticated
[  124.967311] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  125.050256] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 2/3)
[  125.155355] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 3/3)
[  125.259379] wlp2s0: association with 38:22:d6:4c:b7:b1 timed out
[  136.151101] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  137.084173] wlp2s0: authenticate with 58:66:ba:64:72:91
[  137.102493] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  137.142047] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[  137.230827] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[  137.301503] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[  147.363777] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  147.376311] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  147.378917] wlp2s0: authenticated
[  147.379412] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  147.383946] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=127)
[  147.384090] wlp2s0: associated
[  147.384132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  147.388627] ath: EEPROM regdomain: 0x809c
[  147.388628] ath: EEPROM indicates we should expect a country code
[  147.388629] ath: doing EEPROM country->regdmn map search
[  147.388630] ath: country maps to regdmn code: 0x52
[  147.388631] ath: Country alpha2 being used: CN
[  147.388631] ath: Regpair used: 0x52
[  147.388632] ath: regdomain 0x809c dynamically updated by country IE
[  158.793628] wlp2s0: deauthenticating from 38:22:d6:4c:b7:b1 by local choice (Reason: 3=DEAUTH_LEAVING)
[  547.620940] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  548.542908] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  548.561524] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  548.564318] wlp2s0: authenticated
[  548.565690] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  548.569367] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=127)
[  548.569646] wlp2s0: associated
[  548.569902] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  548.579645] ath: EEPROM regdomain: 0x809c
[  548.579647] ath: EEPROM indicates we should expect a country code
[  548.579648] ath: doing EEPROM country->regdmn map search
[  548.579649] ath: country maps to regdmn code: 0x52
[  548.579650] ath: Country alpha2 being used: CN
[  548.579650] ath: Regpair used: 0x52
[  548.579652] ath: regdomain 0x809c dynamically updated by country IE
[  570.226763] wlp2s0: deauthenticating from 38:22:d6:4c:b7:b1 by local choice (Reason: 3=DEAUTH_LEAVING)
[  788.291770] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  788.310756] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  788.312684] wlp2s0: authenticated
[  788.315032] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  788.318874] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=126)
[  788.319030] wlp2s0: associated
[  788.323358] ath: EEPROM regdomain: 0x809c
[  788.323360] ath: EEPROM indicates we should expect a country code
[  788.323361] ath: doing EEPROM country->regdmn map search
[  788.323362] ath: country maps to regdmn code: 0x52
[  788.323363] ath: Country alpha2 being used: CN
[  788.323364] ath: Regpair used: 0x52
[  788.323365] ath: regdomain 0x809c dynamically updated by country IE
[  791.833916] wlp2s0: disconnect from AP 38:22:d6:4c:b7:b1 for new auth to 38:22:d6:48:97:31
[  791.844183] wlp2s0: authenticate with 38:22:d6:48:97:31
[  791.857393] wlp2s0: send auth to 38:22:d6:48:97:31 (try 1/3)
[  791.907945] wlp2s0: send auth to 38:22:d6:48:97:31 (try 2/3)
[  792.003421] wlp2s0: send auth to 38:22:d6:48:97:31 (try 3/3)
[  792.011005] wlp2s0: authenticated
[  792.015044] wlp2s0: associate with 38:22:d6:48:97:31 (try 1/3)
[  792.098550] wlp2s0: associate with 38:22:d6:48:97:31 (try 2/3)
[  792.209345] wlp2s0: associate with 38:22:d6:48:97:31 (try 3/3)
[  792.309952] wlp2s0: association with 38:22:d6:48:97:31 timed out
[  792.500440] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  792.519800] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  792.522194] wlp2s0: authenticated
[  792.523049] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  792.631089] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 2/3)
[  792.635645] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=126)
[  792.635792] wlp2s0: associated
[  792.640175] ath: EEPROM regdomain: 0x809c
[  792.640177] ath: EEPROM indicates we should expect a country code
[  792.640178] ath: doing EEPROM country->regdmn map search
[  792.640179] ath: country maps to regdmn code: 0x52
[  792.640180] ath: Country alpha2 being used: CN
[  792.640180] ath: Regpair used: 0x52
[  792.640181] ath: regdomain 0x809c dynamically updated by country IE
[  848.905858] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  848.922712] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  849.027366] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[  849.109037] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[  849.223375] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[  850.288323] wlp2s0: authenticate with 58:66:ba:64:72:91
[  850.301242] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  850.371058] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[  850.445706] wlp2s0: authenticated
[  850.447382] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[  850.462385] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[  850.462534] wlp2s0: associated
[  850.466767] ath: EEPROM regdomain: 0x809c
[  850.466768] ath: EEPROM indicates we should expect a country code
[  850.466769] ath: doing EEPROM country->regdmn map search
[  850.466770] ath: country maps to regdmn code: 0x52
[  850.466770] ath: Country alpha2 being used: CN
[  850.466771] ath: Regpair used: 0x52
[  850.466772] ath: regdomain 0x809c dynamically updated by country IE
[  852.909007] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  852.926462] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  852.964266] wlp2s0: authenticated
[  852.967396] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  852.975980] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=126)
[  852.976145] wlp2s0: associated
[  852.980715] ath: EEPROM regdomain: 0x809c
[  852.980717] ath: EEPROM indicates we should expect a country code
[  852.980718] ath: doing EEPROM country->regdmn map search
[  852.980719] ath: country maps to regdmn code: 0x52
[  852.980719] ath: Country alpha2 being used: CN
[  852.980720] ath: Regpair used: 0x52
[  852.980721] ath: regdomain 0x809c dynamically updated by country IE
[  984.117213] wlp2s0: disconnect from AP 38:22:d6:4c:b7:b1 for new auth to 58:66:ba:64:72:91
[  984.129236] wlp2s0: authenticate with 58:66:ba:64:72:91
[  984.141904] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  984.192748] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[  984.200540] wlp2s0: authenticated
[  984.204148] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[  984.263924] wlp2s0: associate with 58:66:ba:64:72:91 (try 2/3)
[  984.334505] wlp2s0: associate with 58:66:ba:64:72:91 (try 3/3)
[  984.406353] wlp2s0: association with 58:66:ba:64:72:91 timed out
[  984.569954] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  984.582662] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  984.648413] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[  984.736238] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[  984.801050] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[  985.861523] wlp2s0: authenticate with 58:66:ba:64:72:91
[  985.880818] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  985.945731] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[  986.005495] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[  986.012869] wlp2s0: authenticated
[  986.016167] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[  986.110871] wlp2s0: associate with 58:66:ba:64:72:91 (try 2/3)
[  986.195336] wlp2s0: associate with 58:66:ba:64:72:91 (try 3/3)
[  986.259553] wlp2s0: association with 58:66:ba:64:72:91 timed out
[  987.322405] wlp2s0: authenticate with 58:66:ba:64:72:91
[  987.335104] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[  987.417497] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[  987.542693] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[  987.610288] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[  998.573371] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[  998.600257] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[  998.601656] wlp2s0: authenticated
[  998.604382] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[  998.607141] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=126)
[  998.607297] wlp2s0: associated
[  998.615352] ath: EEPROM regdomain: 0x809c
[  998.615355] ath: EEPROM indicates we should expect a country code
[  998.615357] ath: doing EEPROM country->regdmn map search
[  998.615358] ath: country maps to regdmn code: 0x52
[  998.615360] ath: Country alpha2 being used: CN
[  998.615361] ath: Regpair used: 0x52
[  998.615363] ath: regdomain 0x809c dynamically updated by country IE
[ 1214.934646] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1214.953966] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1215.067878] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[ 1215.109290] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[ 1215.184692] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[ 1215.754134] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[ 1215.766720] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[ 1215.880961] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[ 1215.945297] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[ 1216.059613] wlp2s0: authentication with 38:22:d6:4c:b7:b1 timed out
[ 1217.542062] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1217.560588] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1217.620783] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[ 1217.653333] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[ 1217.701692] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[ 1229.161962] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1231.094719] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1231.114277] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1231.198394] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[ 1231.251079] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[ 1231.323775] wlp2s0: authentication with 58:66:ba:64:72:91 timed out
[ 1233.804153] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1234.746331] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1234.766656] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1234.841237] wlp2s0: authenticated
[ 1234.841537] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[ 1234.856258] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[ 1234.856397] wlp2s0: associated
[ 1234.856452] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1234.859874] ath: EEPROM regdomain: 0x809c
[ 1234.859876] ath: EEPROM indicates we should expect a country code
[ 1234.859877] ath: doing EEPROM country->regdmn map search
[ 1234.859877] ath: country maps to regdmn code: 0x52
[ 1234.859878] ath: Country alpha2 being used: CN
[ 1234.859878] ath: Regpair used: 0x52
[ 1234.859879] ath: regdomain 0x809c dynamically updated by country IE
[ 1242.717842] wlp2s0: deauthenticating from 58:66:ba:64:72:91 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1244.078263] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1244.097808] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1244.166313] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[ 1244.170045] wlp2s0: authenticated
[ 1244.173702] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[ 1244.245923] wlp2s0: associate with 58:66:ba:64:72:91 (try 2/3)
[ 1244.250334] wlp2s0: RX AssocResp from 58:66:ba:64:72:91 (capab=0x8421 status=0 aid=126)
[ 1244.250548] wlp2s0: associated
[ 1244.261031] ath: EEPROM regdomain: 0x809c
[ 1244.261040] ath: EEPROM indicates we should expect a country code
[ 1244.261043] ath: doing EEPROM country->regdmn map search
[ 1244.261045] ath: country maps to regdmn code: 0x52
[ 1244.261048] ath: Country alpha2 being used: CN
[ 1244.261049] ath: Regpair used: 0x52
[ 1244.261056] ath: regdomain 0x809c dynamically updated by country IE
[ 1276.539178] wlp2s0: disconnect from AP 58:66:ba:64:72:91 for new auth to 38:22:d6:48:97:31
[ 1276.552637] wlp2s0: authenticate with 38:22:d6:48:97:31
[ 1276.565232] wlp2s0: send auth to 38:22:d6:48:97:31 (try 1/3)
[ 1276.649617] wlp2s0: send auth to 38:22:d6:48:97:31 (try 2/3)
[ 1276.704071] wlp2s0: send auth to 38:22:d6:48:97:31 (try 3/3)
[ 1276.759883] wlp2s0: authentication with 38:22:d6:48:97:31 timed out
[ 1276.966390] wlp2s0: authenticate with 58:66:ba:64:72:91
[ 1276.984893] wlp2s0: send auth to 58:66:ba:64:72:91 (try 1/3)
[ 1277.153560] wlp2s0: send auth to 58:66:ba:64:72:91 (try 2/3)
[ 1277.266947] wlp2s0: send auth to 58:66:ba:64:72:91 (try 3/3)
[ 1277.374287] wlp2s0: authenticated
[ 1277.377875] wlp2s0: associate with 58:66:ba:64:72:91 (try 1/3)
[ 1277.416711] wlp2s0: associate with 58:66:ba:64:72:91 (try 2/3)
[ 1277.516736] wlp2s0: associate with 58:66:ba:64:72:91 (try 3/3)
[ 1277.603269] wlp2s0: association with 58:66:ba:64:72:91 timed out
[ 1277.762312] wlp2s0: authenticate with 38:22:d6:4c:b7:b1
[ 1277.775138] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 1/3)
[ 1277.893510] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 2/3)
[ 1277.980365] wlp2s0: send auth to 38:22:d6:4c:b7:b1 (try 3/3)
[ 1277.997184] wlp2s0: authenticated
[ 1278.001858] wlp2s0: associate with 38:22:d6:4c:b7:b1 (try 1/3)
[ 1278.012222] wlp2s0: RX AssocResp from 38:22:d6:4c:b7:b1 (capab=0x8421 status=0 aid=126)
[ 1278.012369] wlp2s0: associated
[ 1278.019582] ath: EEPROM regdomain: 0x809c
[ 1278.019584] ath: EEPROM indicates we should expect a country code
[ 1278.019585] ath: doing EEPROM country->regdmn map search
[ 1278.019586] ath: country maps to regdmn code: 0x52
[ 1278.019587] ath: Country alpha2 being used: CN
[ 1278.019588] ath: Regpair used: 0x52
[ 1278.019589] ath: regdomain 0x809c dynamically updated by country IE
[ 1345.461545] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1345.624482] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 1345.931978] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 1347.258254] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1347.385214] nouveau 0000:01:00.0: bus: MMIO write of ffff9f1f FAULT at 6013d4 [ IBUS ]
[ 1347.385524] nouveau 0000:01:00.0: DRM: resuming client object trees...
