[    0.000000] Linux version 4.9.0-deepin4-amd64 (yangbo@deepin.com) (gcc version 6.2.0 20161103 (Debian 6.2.0-11) ) #1 SMP PREEMPT Deepin 4.9.8-4 (2017-04-17) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=8c1b254d-0592-432b-a3d5-6ecf96f0dcdf ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bad8f000-0x00000000badd5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000baddcfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000baddd000-0x00000000bae00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae1f000-0x00000000bae42fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae43000-0x00000000bae85fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae86000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron 620 /0GDG8Y       , BIOS A04 11/21/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1bfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 0BB800000 mask FFF800000 uncachable
[    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 1BFE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 1C0000000 mask FC0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8b94c00fce60]
[    0.000000] Base memory trampoline at [ffff8b94c0096000] 96000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x9a11f000, 0x9a11ffff] PGTABLE
[    0.000000] BRK [0x9a120000, 0x9a120fff] PGTABLE
[    0.000000] BRK [0x9a121000, 0x9a121fff] PGTABLE
[    0.000000] BRK [0x9a122000, 0x9a122fff] PGTABLE
[    0.000000] BRK [0x9a123000, 0x9a123fff] PGTABLE
[    0.000000] BRK [0x9a124000, 0x9a124fff] PGTABLE
[    0.000000] BRK [0x9a125000, 0x9a125fff] PGTABLE
[    0.000000] BRK [0x9a126000, 0x9a126fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32d67000-0x356aafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0470 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000BADD6070 00005C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BADDCA88 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BADD6158 00692B (v02 DELL   WN09     00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BAE16F80 000040
[    0.000000] ACPI: APIC 0x00000000BADDCB80 000062 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BADDCBE8 000098 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000BADDCC80 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BADDCCC0 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000BADDCE38 000038 (v01 DELL   WN09     01072009 AMI. 00000004)
[    0.000000] ACPI: OSFR 0x00000000BADDCE70 000082 (v01 DELL   M08      07DB0B15 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1bfdf8000-0x1bfdfcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001bfdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bad8efff]
[    0.000000]   node   0: [mem 0x00000000bae01000-0x00000000bae01fff]
[    0.000000]   node   0: [mem 0x00000000bae86000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001bfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bfdfffff]
[    0.000000] On node 0 totalpages: 1550501
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 155 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11885 pages used for memmap
[    0.000000]   DMA32 zone: 760586 pages, LIFO batch:31
[    0.000000]   Normal zone: 12280 pages used for memmap
[    0.000000]   Normal zone: 785920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad8f000-0xbadd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadd6000-0xbaddcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaddd000-0xbae00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae02000-0xbae11fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae12000-0xbae1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae1f000-0xbae42fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae43000-0xbae85fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8b967fa00000 s103704 r8192 d31464 u1048576
[    0.000000] pcpu-alloc: s103704 r8192 d31464 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1526117
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=8c1b254d-0592-432b-a3d5-6ecf96f0dcdf ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5978964K/6202004K available (6217K kernel code, 1134K rwdata, 2852K rodata, 1340K init, 684K bss, 223040K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2694.020 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.04 BogoMIPS (lpj=10776080)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000039] ACPI: Core revision 20160831
[    0.003353] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003395] Security Framework initialized
[    0.003397] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003403] AppArmor: AppArmor disabled by boot time parameter
[    0.003814] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005307] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005968] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005977] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006238] CPU: Physical Processor ID: 0
[    0.006239] CPU: Processor Core ID: 0
[    0.006244] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006244] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006246] mce: CPU supports 7 MCE banks
[    0.006253] CPU0: Thermal monitoring enabled (TM1)
[    0.006262] process: using mwait in idle threads
[    0.006265] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.006639] Freeing SMP alternatives memory: 24K (ffffffff9f66c000 - ffffffff9f672000)
[    0.007641] ftrace: allocating 25005 entries in 98 pages
[    0.018519] smpboot: Max logical packages: 1
[    0.018945] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058633] TSC deadline timer enabled
[    0.058636] smpboot: CPU0: Intel(R) Pentium(R) CPU G630 @ 2.70GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.058640] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.058659] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.058661] ... version:                3
[    0.058662] ... bit width:              48
[    0.058662] ... generic registers:      8
[    0.058663] ... value mask:             0000ffffffffffff
[    0.058663] ... max period:             00007fffffffffff
[    0.058664] ... fixed-purpose events:   3
[    0.058665] ... event mask:             00000007000000ff
[    0.098744] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.138740] x86: Booting SMP configuration:
[    0.138741] .... node  #0, CPUs:      #1
[    0.141143] x86: Booted up 1 node, 2 CPUs
[    0.141146] smpboot: Total of 2 processors activated (10776.08 BogoMIPS)
[    0.142548] devtmpfs: initialized
[    0.142617] x86/mm: Memory block size: 128MB
[    0.144937] PM: Registering ACPI NVS region [mem 0xbad8f000-0xbadd5fff] (290816 bytes)
[    0.144945] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1efff] (53248 bytes)
[    0.144947] PM: Registering ACPI NVS region [mem 0xbae43000-0xbae85fff] (274432 bytes)
[    0.145007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.145034] pinctrl core: initialized pinctrl subsystem
[    0.145150] NET: Registered protocol family 16
[    0.157126] cpuidle: using governor ladder
[    0.169130] cpuidle: using governor menu
[    0.169162] ACPI: bus type PCI registered
[    0.169164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.169241] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.169243] PCI: not using MMCONFIG
[    0.169244] PCI: Using configuration type 1 for base access
[    0.169316] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.169322] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.181280] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.181457] ACPI: Added _OSI(Module Device)
[    0.181458] ACPI: Added _OSI(Processor Device)
[    0.181458] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.181459] ACPI: Added _OSI(Processor Aggregator Device)
[    0.181630] ACPI: Executed 1 blocks of module-level executable AML code
[    0.184778] ACPI: Dynamic OEM Table Load:
[    0.184782] ACPI: SSDT 0xFFFF8B967839D000 0001D8 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.184888] ACPI: Dynamic OEM Table Load:
[    0.184891] ACPI: SSDT 0xFFFF8B96783BB500 000054 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.185262] ACPI: Interpreter enabled
[    0.185277] ACPI: (supports S0 S1 S3 S4 S5)
[    0.185278] ACPI: Using IOAPIC for interrupt routing
[    0.185305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.185360] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.185364] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.185658] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.185867] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.190395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.190581] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.190875] PCI host bridge to bus 0000:00
[    0.190877] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.190878] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.190880] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.190881] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.190882] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.190883] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.190884] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.190885] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.190892] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.190983] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.190991] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.190996] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.191000] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.191106] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.191127] pci 0000:00:16.0: reg 0x10: [mem 0xfe407000-0xfe40700f 64bit]
[    0.191201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.191288] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.191305] pci 0000:00:1a.0: reg 0x10: [mem 0xfe406000-0xfe4063ff]
[    0.191387] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.191432] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.191476] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.191493] pci 0000:00:1b.0: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[    0.191565] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.191649] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.191777] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.191830] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.191873] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.191947] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.191995] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.192038] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.192055] pci 0000:00:1d.0: reg 0x10: [mem 0xfe405000-0xfe4053ff]
[    0.192138] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.192182] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.192222] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.192393] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
[    0.192407] pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
[    0.192415] pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
[    0.192422] pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.192430] pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.192437] pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
[    0.192445] pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
[    0.192455] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.192456] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.192457] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.192458] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.192548] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.192564] pci 0000:00:1f.3: reg 0x10: [mem 0xfe404000-0xfe4040ff 64bit]
[    0.192584] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.192676] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.192690] pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.192697] pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.192705] pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
[    0.192712] pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
[    0.192720] pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
[    0.192727] pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
[    0.192887] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.192974] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.192997] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.193030] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.193051] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.193160] pci 0000:02:00.0: supports D1 D2
[    0.193161] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202775] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.202781] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.202793] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.203158] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.203204] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.203248] ACPI: PCI Interrupt Link [LNKC] (IRQs *7)
[    0.203293] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.203338] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7) *0
[    0.203383] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7) *0
[    0.203430] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.203475] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[    0.203528] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.203650] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.203652] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.203653] vgaarb: loaded
[    0.203654] vgaarb: bridge control possible 0000:00:02.0
[    0.203722] PCI: Using ACPI for IRQ routing
[    0.209994] PCI: pci_cache_line_size set to 64 bytes
[    0.210033] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[    0.210035] e820: reserve RAM buffer [mem 0xbad8f000-0xbbffffff]
[    0.210036] e820: reserve RAM buffer [mem 0xbae02000-0xbbffffff]
[    0.210037] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.210038] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
[    0.210178] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.210183] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.212204] clocksource: Switched to clocksource hpet
[    0.218620] VFS: Disk quotas dquot_6.6.0
[    0.218646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.218732] pnp: PnP ACPI init
[    0.218868] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.218870] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.218871] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.218873] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.218874] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.218878] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.218953] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.218956] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.219028] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.219076] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.219078] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.219236] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.219238] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.219239] system 00:04: [io  0x1180-0x119f] has been reserved
[    0.219240] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.219242] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.219244] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.219245] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.219247] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.219249] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.219303] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.219305] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.219489] pnp: PnP ACPI: found 6 devices
[    0.225836] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.225863] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.225881] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.225884] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.225891] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.225897] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.225898] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.225899] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.225901] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.225902] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.225903] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.225904] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.225906] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.225907] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.225988] NET: Registered protocol family 2
[    0.226180] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.226309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.226437] TCP: Hash tables configured (established 65536 bind 65536)
[    0.226463] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.226488] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.226552] NET: Registered protocol family 1
[    0.226588] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.488299] PCI: CLS 64 bytes, default 64
[    0.488352] Unpacking initramfs...
[    1.088981] Freeing initrd memory: 42256K (ffff8b94f2d67000 - ffff8b94f56ab000)
[    1.088984] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.088986] software IO TLB [mem 0xb6d8f000-0xbad8f000] (64MB) mapped at [ffff8b9576d8f000-ffff8b957ad8efff]
[    1.089320] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.089340] audit: initializing netlink subsys (disabled)
[    1.089357] audit: type=2000 audit(1495422450.088:1): initialized
[    1.089639] Initialise system trusted keyrings
[    1.089716] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.089738] zbud: loaded
[    1.132984] Key type asymmetric registered
[    1.132985] Asymmetric key parser 'x509' registered
[    1.133002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.133027] io scheduler noop registered
[    1.133028] io scheduler deadline registered
[    1.133037] io scheduler cfq registered (default)
[    1.133479] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.133484] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    1.133511] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.133512] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.133515] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[    1.133525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.133529] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.133540] intel_idle: MWAIT substates: 0x1120
[    1.133541] intel_idle: v0.4.1 model 0x2A
[    1.133608] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.133815] GHES: HEST is not enabled!
[    1.133862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.154607] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.154901] Linux agpgart interface v0.103
[    1.154938] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.154938] AMD IOMMUv2 functionality not available on this system
[    1.155112] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.158050] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.158083] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.158243] mousedev: PS/2 mouse device common for all mice
[    1.158280] rtc_cmos 00:02: RTC can wake from S4
[    1.158438] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.158462] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.158471] intel_pstate: Intel P-state driver initializing
[    1.158632] ledtrig-cpu: registered to indicate activity on CPUs
[    1.158973] NET: Registered protocol family 10
[    1.159263] mip6: Mobile IPv6
[    1.159266] NET: Registered protocol family 17
[    1.159269] mpls_gso: MPLS GSO support
[    1.159499] microcode: sig=0x206a7, pf=0x2, revision=0x1a
[    1.159599] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.159771] registered taskstats version 1
[    1.159774] Loading compiled-in X.509 certificates
[    1.161743] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.162176] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.162196] zswap: loaded using pool lzo/zbud
[    1.162623] rtc_cmos 00:02: setting system clock to 2017-05-22 03:07:30 UTC (1495422450)
[    1.162722] PM: Hibernation image not present or could not be loaded.
[    1.164540] Freeing unused kernel memory: 1340K (ffffffff9f51d000 - ffffffff9f66c000)
[    1.164542] Write protecting the kernel read-only data: 12288k
[    1.165353] Freeing unused kernel memory: 1960K (ffff8b9559816000 - ffff8b9559a00000)
[    1.169734] Freeing unused kernel memory: 1244K (ffff8b9559cc9000 - ffff8b9559e00000)
[    1.178884] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.195679] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.195781] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.195794] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.195809] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.196687] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.196728] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.197560] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.197628] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.197988] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.198053] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.228113] usb_common: module verification failed: signature and/or required key missing - tainting kernel
[    1.229628] ACPI: bus type USB registered
[    1.229655] usbcore: registered new interface driver usbfs
[    1.229667] usbcore: registered new interface driver hub
[    1.229691] usbcore: registered new device driver usb
[    1.230085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.230240] ehci-pci: EHCI PCI platform driver
[    1.230376] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.230382] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.230397] ehci-pci 0000:00:1a.0: debug port 2
[    1.236688] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.236708] ehci-pci 0000:00:1a.0: irq 17, io mem 0xfe406000
[    1.239034] [drm] Initialized
[    1.240459] SCSI subsystem initialized
[    1.240687] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.240691] ACPI: Power Button [PWRB]
[    1.240750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.240752] ACPI: Power Button [PWRF]
[    1.247896] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.248492] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffff9d39c0c9d000, d4:be:d9:e3:03:91, XID 0c900800 IRQ 26
[    1.248494] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.252211] libata version 3.00 loaded.
[    1.252296] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.252344] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.252345] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.252347] usb usb1: Product: EHCI Host Controller
[    1.252348] usb usb1: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.252349] usb usb1: SerialNumber: 0000:00:1a.0
[    1.252508] hub 1-0:1.0: USB hub found
[    1.252514] hub 1-0:1.0: 2 ports detected
[    1.252756] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.252760] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.252772] ehci-pci 0000:00:1d.0: debug port 2
[    1.256684] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.256699] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe405000
[    1.258927] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.272173] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.272229] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.272230] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.272231] usb usb2: Product: EHCI Host Controller
[    1.272233] usb usb2: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.272234] usb usb2: SerialNumber: 0000:00:1d.0
[    1.272392] hub 2-0:1.0: USB hub found
[    1.272399] hub 2-0:1.0: 2 ports detected
[    1.272993] [drm] Memory usable by graphics device = 2048M
[    1.272994] [drm] Replacing VGA console driver
[    1.273508] Console: switching to colour dummy device 80x25
[    1.280091] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.280093] [drm] Driver supports precise vblank timestamp query.
[    1.286379] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.294936] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.295148] ata_piix 0000:00:1f.2: version 2.13
[    1.295246] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.319881] fbcon: inteldrmfb (fb0) is primary device
[    1.383465] Console: switching to colour frame buffer device 240x67
[    1.404128] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.405019] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.457528] scsi host0: ata_piix
[    1.461725] scsi host1: ata_piix
[    1.461817] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[    1.461821] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[    1.461934] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.580197] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.600191] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.625487] scsi host2: ata_piix
[    1.629701] scsi host3: ata_piix
[    1.629796] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.629800] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.728546] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.728549] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.728924] hub 1-1:1.0: USB hub found
[    1.729467] hub 1-1:1.0: 4 ports detected
[    1.748650] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.748653] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.749027] hub 2-1:1.0: USB hub found
[    1.749500] hub 2-1:1.0: 6 ports detected
[    2.016169] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[    2.104218] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.108156] tsc: Refined TSC clocksource calibration: 2693.881 MHz
[    2.108164] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4aa266ff, max_idle_ns: 440795313891 ns
[    2.124356] ata3.00: ATAPI: HL-DT-ST DVD+/-RW GH82N, A101, max UDMA/100
[    2.134295] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2111
[    2.134298] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.134300] usb 1-1.3: Product: Dell USB Wired Entry Keyboard
[    2.134301] usb 1-1.3: Manufacturer: Dell
[    2.139109] hidraw: raw HID events driver (C) Jiri Kosina
[    2.148275] usbcore: registered new interface driver usbhid
[    2.148277] usbhid: USB HID core driver
[    2.148581] ata3.00: configured for UDMA/100
[    2.150743] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2111.0001/input/input5
[    2.208363] hid-generic 0003:413C:2111.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:1a.0-1.3/input0
[    2.209677] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:413C:2111.0002/input/input6
[    2.212165] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
[    2.268326] hid-generic 0003:413C:2111.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:1a.0-1.3/input1
[    2.324269] usb 1-1.4: New USB device found, idVendor=0461, idProduct=4d81
[    2.324272] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.324274] usb 1-1.4: Product: USB Optical Mouse
[    2.327286] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0461:4D81.0003/input/input7
[    2.327393] hid-generic 0003:0461:4D81.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    2.504125] ata2.00: failed to resume link (SControl 0)
[    2.672115] ata4: failed to resume link (SControl 0)
[    2.683674] ata4: SATA link down (SStatus 4 SControl 0)
[    2.816132] ata1.01: failed to resume link (SControl 0)
[    2.976147] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.976159] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.978956] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[    2.978958] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.981756] ata1.00: configured for UDMA/133
[    2.986068] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[    3.019746] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.019811] sd 0:0:0:0: [sda] Write Protect is off
[    3.019814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.019841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.097990]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[    3.099312] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.132278] clocksource: Switched to clocksource tsc
[    3.544060] ata2.01: failed to resume link (SControl 0)
[    3.555621] ata2.00: SATA link down (SStatus 4 SControl 0)
[    3.555645] ata2.01: SATA link down (SStatus 0 SControl 0)
[    3.559055] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH82N    A101 PQ: 0 ANSI: 5
[    3.599998] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.600001] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.600190] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.652812] random: fast init done
[    4.452012] md: linear personality registered for level -1
[    4.453594] md: multipath personality registered for level -4
[    4.455062] md: raid0 personality registered for level 0
[    4.456753] md: raid1 personality registered for level 1
[    4.524055] raid6: sse2x1   gen()  4837 MB/s
[    4.591991] raid6: sse2x1   xor()  5307 MB/s
[    4.659981] raid6: sse2x2   gen()  6397 MB/s
[    4.727970] raid6: sse2x2   xor()  5982 MB/s
[    4.795975] raid6: sse2x4   gen() 10442 MB/s
[    4.863989] raid6: sse2x4   xor()  7741 MB/s
[    4.863990] raid6: using algorithm sse2x4 gen() 10442 MB/s
[    4.863991] raid6: .... xor() 7741 MB/s, rmw enabled
[    4.863992] raid6: using ssse3x2 recovery algorithm
[    4.864246] xor: measuring software checksum speed
[    4.903962]    prefetch64-sse: 14564.000 MB/sec
[    4.943959]    generic_sse: 13373.000 MB/sec
[    4.943960] xor: using function: prefetch64-sse (14564.000 MB/sec)
[    4.944194] async_tx: api initialized (async)
[    4.949657] md: raid6 personality registered for level 6
[    4.949659] md: raid5 personality registered for level 5
[    4.949660] md: raid4 personality registered for level 4
[    4.952694] md: raid10 personality registered for level 10
[    5.560349] Btrfs loaded, crc32c=crc32c-intel
[    6.073214] PM: Starting manual resume from disk
[    6.073218] PM: Hibernation image partition 8:3 present
[    6.073220] PM: Looking for hibernation image.
[    6.089413] PM: Image not found (code -22)
[    6.089414] PM: Hibernation image not present or could not be loaded.
[    6.308288] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.167130] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.167249] systemd[1]: Detected architecture x86-64.
[    7.178831] systemd[1]: Set hostname to <shiy-PC>.
[    7.481323] random: crng init done
[    8.204928] systemd[1]: Listening on udev Kernel Socket.
[    8.205158] systemd[1]: Created slice User and Session Slice.
[    8.205245] systemd[1]: Listening on Journal Audit Socket.
[    8.205290] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.205327] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.205354] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.205394] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.776052] lp: driver loaded but no devices found
[    9.106423] ppdev: user-space parallel port driver
[    9.219292] bbswitch: loading out-of-tree module taints kernel.
[    9.219591] bbswitch: version 0.8
[    9.219596] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    9.219600] bbswitch: No discrete VGA device found
[    9.477643] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    9.573768] systemd-journald[707]: Received request to flush runtime journal from PID 1
[    9.944296] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.017163] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.025628] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000548-0x0000000000000548 (\_SB.PCI0.SBRG.UAR1.GP) (20160831/utaddress-247)
[   10.025634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.076372] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   10.298131] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   10.298133] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   10.298134] RAPL PMU: hw unit of domain package 2^-16 Joules
[   10.298134] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   10.321302] iTCO_vendor_support: vendor-support=0
[   10.321710] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.321743] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   10.321857] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.340488] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.340519] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   10.509819] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.664831] snd_hda_codec_conexant hdaudioC0D2: CX20641: BIOS auto-probing.
[   10.665387] snd_hda_codec_conexant hdaudioC0D2: autoconfig for CX20641: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   10.665389] snd_hda_codec_conexant hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.665391] snd_hda_codec_conexant hdaudioC0D2:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   10.665392] snd_hda_codec_conexant hdaudioC0D2:    mono: mono_out=0x0
[   10.665393] snd_hda_codec_conexant hdaudioC0D2:    inputs:
[   10.665396] snd_hda_codec_conexant hdaudioC0D2:      Rear Mic=0x1b
[   10.665397] snd_hda_codec_conexant hdaudioC0D2:      Front Mic=0x1a
[   10.665399] snd_hda_codec_conexant hdaudioC0D2:      Line=0x1d
[   10.666748] snd_hda_codec_conexant hdaudioC0D2: Enable sync_write for stable communication
[   10.682099] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.737101] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.737379] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.737445] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.737508] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.737572] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.737635] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.737698] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   11.598489] Adding 3999740k swap on /dev/sda3.  Priority:-1 extents:1 across:3999740k FS
[   12.770675] intel_rapl: Found RAPL domain package
[   12.770680] intel_rapl: Found RAPL domain core
[   12.770683] intel_rapl: Found RAPL domain uncore
[   12.770690] intel_rapl: RAPL package 0 domain package locked by BIOS
[   15.423697] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.900244] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   18.795799] systemd[1]: apt-daily.timer: Adding 11h 29min 19.007520s random time.
[   22.570811] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   22.707861] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   22.825247] r8169 0000:02:00.0 enp2s0: link down
[   22.825254] r8169 0000:02:00.0 enp2s0: link down
[   22.825309] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   23.234154] NET: Registered protocol family 15
[   23.608251] Initializing XFRM netlink socket
[   24.345449] r8169 0000:02:00.0 enp2s0: link up
[   24.345461] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   24.378762] r8169 0000:02:00.0 enp2s0: link down
[   25.670823] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   25.939245] r8169 0000:02:00.0 enp2s0: link up
[   25.939255] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   45.055189] vboxdrv: Found 2 processor cores
[   45.074130] vboxdrv: TSC mode is Invariant, tentative frequency 2693881224 Hz
[   45.074133] vboxdrv: Successfully loaded version 5.1.10_Deepin (interface 0x00280000)
[   45.100766] VBoxNetFlt: Successfully started.
[   45.191464] VBoxNetAdp: Successfully started.
[   45.221559] VBoxPciLinuxInit
[   45.254637] vboxpci: IOMMU not found (not registered)
[   45.596793] at-spi-bus-laun[2112]: segfault at 1 ip 00007f1fcf589496 sp 00007fff353a1e98 error 4 in libc-2.24.so[7f1fcf509000+195000]
[   55.476861] fuse init (API version 7.26)
[   63.451856] at-spi-bus-laun[2406]: segfault at 1 ip 00007f3bddc2f496 sp 00007ffd07486ea8 error 4 in libc-2.24.so[7f3bddbaf000+195000]
[  340.547875] gdbus[3156]: segfault at 100000000 ip 00007f701b562bf0 sp 00007f7016ee1c38 error 4 in libgio-2.0.so.0.5000.2[7f701b4ff000+188000]
[ 3609.945955] traps: QDBusConnection[3919] general protection ip:7f89962327af sp:7f897e2518c0 error:0
[ 3609.945963]  in libQt5Core.so.5.6.1[7f8995f7c000+4c6000]
[ 6368.640521] ------------[ cut here ]------------
[ 6368.640529] WARNING: CPU: 0 PID: 4778 at /home/jenkins/workspace/kernel-ci/source/arch/x86/include/asm/fpu/internal.h:534 fpu__restore+0xce/0x250
[ 6368.640530] Modules linked in: snd_seq_dummy(E) snd_seq(E) snd_seq_device(E) cfg80211(E) rfkill(E) fuse(E) pci_stub(E) vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) xfrm_user(E) xfrm4_tunnel(E) tunnel4(E) ipcomp(E) xfrm_ipcomp(E) esp4(E) ah4(E) af_key(E) xfrm_algo(E) joydev(E) intel_rapl(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) snd_hda_codec_hdmi(E) snd_hda_codec_conexant(E) ghash_clmulni_intel(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) dcdbas(E) intel_cstate(E) snd_hda_core(E) snd_hwdep(E) intel_uncore(E) dell_smm_hwmon(E) sg(E) iTCO_wdt(E) iTCO_vendor_support(E) intel_rapl_perf(E) snd_pcm(E) evdev(E) pcspkr(E) serio_raw(E) lpc_ich(E) shpchp(E) snd_timer(E) snd(E) soundcore(E) mei_me(E)
[ 6368.640559]  mei(E) i2c_i801(E) i2c_smbus(E) mfd_core(E) tpm_tis(E) tpm_tis_core(E) tpm(E) binfmt_misc(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) ext4(E) crc16(E) jbd2(E) fscrypto(E) ecb(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E) aes_x86_64(E) mbcache(E) btrfs(E) raid10(E) raid456(E) async_raid6_recov(E) async_memcpy(E) async_pq(E) async_xor(E) async_tx(E) xor(E) raid6_pq(E) libcrc32c(E) crc32c_generic(E) raid1(E) raid0(E) multipath(E) linear(E) md_mod(E) sr_mod(E) cdrom(E) sd_mod(E) hid_generic(E) usbhid(E) ata_generic(E) hid(E) crc32c_intel(E) psmouse(E) ata_piix(E) fjes(E) r8169(E) mii(E) i915(E) video(E) libata(E) button(E) i2c_algo_bit(E) drm_kms_helper(E) scsi_mod(E) drm(E) ehci_pci(E) ehci_hcd(E) usbcore(E) usb_common(E)
[ 6368.640593] CPU: 0 PID: 4778 Comm: wineserver.real Tainted: G           OE   4.9.0-deepin4-amd64 #1 Deepin 4.9.8-4
[ 6368.640594] Hardware name: Dell Inc. Inspiron 620 /0GDG8Y       , BIOS A04 11/21/2011
[ 6368.640595]  0000000000000000 ffffffff9eb35b82 0000000000000000 0000000000000000
[ 6368.640598]  ffffffff9e879fae ffff8b95029db8c0 0000000000000003 ffff8b95029dadc0
[ 6368.640599]  ffff8b95029db8c0 ffff8b95029db900 0000000000000000 ffffffff9e832b1e
[ 6368.640602] Call Trace:
[ 6368.640607]  [<ffffffff9eb35b82>] ? dump_stack+0x5c/0x7a
[ 6368.640610]  [<ffffffff9e879fae>] ? __warn+0xbe/0xe0
[ 6368.640611]  [<ffffffff9e832b1e>] ? fpu__restore+0xce/0x250
[ 6368.640613]  [<ffffffff9e83436b>] ? __fpu__restore_sig+0x24b/0x5d0
[ 6368.640615]  [<ffffffff9e86f6f6>] ? ia32_restore_sigcontext+0x146/0x160
[ 6368.640616]  [<ffffffff9e86f90d>] ? sys32_sigreturn+0xbd/0xd0
[ 6368.640618]  [<ffffffff9e803c73>] ? do_int80_syscall_32+0x53/0xc0
[ 6368.640622]  [<ffffffff9ee0f1f3>] ? entry_INT80_compat+0x33/0x40
[ 6368.640623] ---[ end trace 65d11bf9bf25c50d ]---
[ 9192.291779] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[10474.572594] perf: interrupt took too long (3135 > 3128), lowering kernel.perf_event_max_sample_rate to 63750
[14798.795533] perf: interrupt took too long (3929 > 3918), lowering kernel.perf_event_max_sample_rate to 50750
[19110.843858] deepin-terminal[2574]: segfault at 11ea0 ip 00007fb36420143e sp 00007ffe2efb5b60 error 4 in libgtk-3.so.0.2200.2[7fb363e82000+6f8000]
[19197.125537] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[19198.566056] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[19200.413351] r8169 0000:02:00.0: invalid short VPD tag 00 at offset 1
[19200.757536] Bluetooth: Core ver 2.22
[19200.757560] NET: Registered protocol family 31
[19200.757561] Bluetooth: HCI device and connection manager initialized
[19200.757566] Bluetooth: HCI socket layer initialized
[19200.757568] Bluetooth: L2CAP socket layer initialized
[19200.757573] Bluetooth: SCO socket layer initialized
