[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.9.0-deepin4-amd64 (yangbo@deepin.com) (gcc version 6.2.0 20161103 (Debian 6.2.0-11) ) #1 SMP PREEMPT Deepin 4.9.8-4 (2017-04-17) ()
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=42562E4D562E41D1 loop=/deepin/disks/root.disk boot=lupin ro splash quiet vt.handoff=7
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a6abefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cf5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire E1-471/EA40_HC, BIOS V1.17 04/25/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1cf600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0A7000000 mask FFF000000 uncachable
[    0.000000]   3 base 0A8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 1CF600000 mask FFFE00000 uncachable
[    0.000000]   8 base 1CF800000 mask FFF800000 uncachable
[    0.000000]   9 base 1D0000000 mask FF0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff9106000fe1b0]
[    0.000000] Base memory trampoline at [ffff910600097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x18651f000, 0x18651ffff] PGTABLE
[    0.000000] BRK [0x186520000, 0x186520fff] PGTABLE
[    0.000000] BRK [0x186521000, 0x186521fff] PGTABLE
[    0.000000] BRK [0x186522000, 0x186522fff] PGTABLE
[    0.000000] BRK [0x186523000, 0x186523fff] PGTABLE
[    0.000000] BRK [0x186524000, 0x186524fff] PGTABLE
[    0.000000] BRK [0x186525000, 0x186525fff] PGTABLE
[    0.000000] BRK [0x186526000, 0x186526fff] PGTABLE
[    0.000000] BRK [0x186527000, 0x186527fff] PGTABLE
[    0.000000] BRK [0x186528000, 0x186528fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32e0b000-0x356fcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000A6FFE210 00009C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000A6FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x00000000A6FED000 00ADB8 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x00000000A6FBB000 000040
[    0.000000] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x00000000A6FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 0x00000000A6FEC000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: WDAT 0x00000000A6FEB000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FE9000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x00000000A6FE7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x00000000A6FE2000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x00000000A6FE1000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x00000000A6FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDE000 000968 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDD000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cf5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1cf5f9000-0x1cf5fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001cf5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000a6abefff]
[    0.000000]   node   0: [mem 0x00000000a6fff000-0x00000000a6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001cf5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cf5fffff]
[    0.000000] On node 0 totalpages: 1530972
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10587 pages used for memmap
[    0.000000]   DMA32 zone: 677568 pages, LIFO batch:31
[    0.000000]   Normal zone: 13272 pages used for memmap
[    0.000000]   Normal zone: 849408 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000a7a00000-0x00000000af9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6abf000-0xa6ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9107cf200000 s103704 r8192 d31464 u262144
[    0.000000] pcpu-alloc: s103704 r8192 d31464 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1506893
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-deepin4-amd64 root=UUID=42562E4D562E41D1 loop=/deepin/disks/root.disk boot=lupin ro splash quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5902384K/6123888K available (6217K kernel code, 1134K rwdata, 2852K rodata, 1340K init, 684K bss, 221504K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.926 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.85 BogoMIPS (lpj=8779704)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000051] ACPI: Core revision 20160831
[    0.007361] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.007416] Security Framework initialized
[    0.007418] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007423] AppArmor: AppArmor disabled by boot time parameter
[    0.007931] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009705] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010483] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010494] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010787] CPU: Physical Processor ID: 0
[    0.010788] CPU: Processor Core ID: 0
[    0.010793] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010793] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010795] mce: CPU supports 7 MCE banks
[    0.010803] CPU0: Thermal monitoring enabled (TM1)
[    0.010813] process: using mwait in idle threads
[    0.010816] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.010817] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.011256] Freeing SMP alternatives memory: 24K (ffffffffbde6c000 - ffffffffbde72000)
[    0.023245] ftrace: allocating 25005 entries in 98 pages
[    0.036423] smpboot: Max logical packages: 4
[    0.036499] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.036967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076656] TSC deadline timer enabled
[    0.076659] smpboot: CPU0: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.076664] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.076687] ... version:                3
[    0.076688] ... bit width:              48
[    0.076688] ... generic registers:      4
[    0.076689] ... value mask:             0000ffffffffffff
[    0.076690] ... max period:             00007fffffffffff
[    0.076690] ... fixed-purpose events:   3
[    0.076691] ... event mask:             000000070000000f
[    0.116982] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.156870] x86: Booting SMP configuration:
[    0.156873] .... node  #0, CPUs:      #1 #2 #3
[    0.223436] x86: Booted up 1 node, 4 CPUs
[    0.223439] smpboot: Total of 4 processors activated (17559.40 BogoMIPS)
[    0.226915] devtmpfs: initialized
[    0.226992] x86/mm: Memory block size: 128MB
[    0.229815] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[    0.229909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.229949] pinctrl core: initialized pinctrl subsystem
[    0.230080] NET: Registered protocol family 16
[    0.242574] cpuidle: using governor ladder
[    0.262595] cpuidle: using governor menu
[    0.262666] Simple Boot Flag at 0x44 set to 0x1
[    0.262690] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.262693] ACPI: bus type PCI registered
[    0.262696] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.262798] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.262800] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.262814] PCI: Using configuration type 1 for base access
[    0.262859] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.278839] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.279099] ACPI: Added _OSI(Module Device)
[    0.279100] ACPI: Added _OSI(Processor Device)
[    0.279101] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.279101] ACPI: Added _OSI(Processor Aggregator Device)
[    0.279298] ACPI: Executed 1 blocks of module-level executable AML code
[    0.283796] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.284516] ACPI: Dynamic OEM Table Load:
[    0.284526] ACPI: SSDT 0xFFFF9107C744C000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20111123)
[    0.284933] ACPI: Dynamic OEM Table Load:
[    0.284940] ACPI: SSDT 0xFFFF9107C75C8800 000303 (v01 PmRef  ApIst    00003000 INTL 20111123)
[    0.285211] ACPI: Dynamic OEM Table Load:
[    0.285217] ACPI: SSDT 0xFFFF9107C88A5600 000119 (v01 PmRef  ApCst    00003000 INTL 20111123)
[    0.286049] ACPI : EC: EC started
[    0.286260] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.286262] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.286263] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.286264] ACPI: Interpreter enabled
[    0.286289] ACPI: (supports S0 S3 S4 S5)
[    0.286290] ACPI: Using IOAPIC for interrupt routing
[    0.286319] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.292556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.292561] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.292648] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.293179] PCI host bridge to bus 0000:00
[    0.293182] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.293183] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.293185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.293186] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.293188] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.293195] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.293303] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.293313] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.293319] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.293324] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.293451] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.293473] pci 0000:00:16.0: reg 0x10: [mem 0xc0704000-0xc070400f 64bit]
[    0.293552] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.293654] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.293920] pci 0000:00:1a.0: reg 0x10: [mem 0xc0709000-0xc07093ff]
[    0.295447] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.295518] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.295570] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.295589] pci 0000:00:1b.0: reg 0x10: [mem 0xc0700000-0xc0703fff 64bit]
[    0.295670] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.295725] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.295773] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.295858] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.295912] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.295959] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.296043] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.296097] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.296151] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.296278] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.296339] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.296387] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.296645] pci 0000:00:1d.0: reg 0x10: [mem 0xc0708000-0xc07083ff]
[    0.298165] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.298231] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.298280] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.298476] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.298493] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.298502] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.298510] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.298518] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.298527] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.298535] pci 0000:00:1f.2: reg 0x24: [mem 0xc0707000-0xc07077ff]
[    0.298581] pci 0000:00:1f.2: PME# supported from D3hot
[    0.298675] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.298692] pci 0000:00:1f.3: reg 0x10: [mem 0xc0705000-0xc07050ff 64bit]
[    0.298714] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.298880] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.298972] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
[    0.298997] pci 0000:04:00.0: reg 0x10: [mem 0xc0600000-0xc060ffff]
[    0.299178] pci 0000:04:00.0: supports D1 D2
[    0.299179] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.299229] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.299288] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
[    0.299313] pci 0000:04:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.299348] pci 0000:04:00.2: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.299370] pci 0000:04:00.2: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.299476] pci 0000:04:00.2: supports D1 D2
[    0.299477] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.310732] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.310740] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.310749] pci 0000:00:1c.2:   bridge window [mem 0xc0600000-0xc06fffff]
[    0.310762] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.310925] pci 0000:09:00.0: [14e4:4727] type 00 class 0x028000
[    0.310962] pci 0000:09:00.0: reg 0x10: [mem 0xc0500000-0xc0503fff 64bit]
[    0.311168] pci 0000:09:00.0: supports D1 D2
[    0.311169] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    0.311225] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.322759] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.322772] pci 0000:00:1c.7:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.323348] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.323414] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.323477] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.323544] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.323605] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.323668] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.323731] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.323794] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.324021] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.324099] ACPI : EC: event unblocked
[    0.324105] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.324107] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.324283] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.324285] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.324287] vgaarb: loaded
[    0.324288] vgaarb: bridge control possible 0000:00:02.0
[    0.324362] PCI: Using ACPI for IRQ routing
[    0.331288] PCI: pci_cache_line_size set to 64 bytes
[    0.331370] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.331372] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[    0.331373] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.331374] e820: reserve RAM buffer [mem 0x1cf600000-0x1cfffffff]
[    0.331557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.331563] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.333585] clocksource: Switched to clocksource hpet
[    0.341147] VFS: Disk quotas dquot_6.6.0
[    0.341180] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.341280] pnp: PnP ACPI init
[    0.341446] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.341448] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.341449] system 00:00: [io  0xffff] has been reserved
[    0.341451] system 00:00: [io  0xffff] has been reserved
[    0.341454] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.341456] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.341457] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.341459] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.341463] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341495] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.341557] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.341560] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.341605] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.341633] pnp 00:04: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[    0.341793] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.341794] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.341796] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.341798] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.341799] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.341801] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.341803] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.341805] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.341806] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.341808] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.341810] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342081] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.342083] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.342085] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.342124] pnp: PnP ACPI: found 7 devices
[    0.348783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.348820] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.348835] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.348838] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.348843] pci 0000:00:1c.2:   bridge window [mem 0xc0600000-0xc06fffff]
[    0.348847] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.348854] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.348861] pci 0000:00:1c.7:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.348873] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.348875] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.348876] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.348878] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[    0.348879] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.348881] pci_bus 0000:04: resource 1 [mem 0xc0600000-0xc06fffff]
[    0.348882] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.348883] pci_bus 0000:09: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.349003] NET: Registered protocol family 2
[    0.349212] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.349364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.349498] TCP: Hash tables configured (established 65536 bind 65536)
[    0.349526] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.349558] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.349660] NET: Registered protocol family 1
[    0.349676] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.389829] PCI: CLS 64 bytes, default 64
[    0.389885] Unpacking initramfs...
[    1.118160] Freeing initrd memory: 41928K (ffff910632e0b000 - ffff9106356fd000)
[    1.118164] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.118166] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff9106a2abf000-ffff9106a6abefff]
[    1.118646] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.118682] audit: initializing netlink subsys (disabled)
[    1.118701] audit: type=2000 audit(1493196822.108:1): initialized
[    1.119044] Initialise system trusted keyrings
[    1.119150] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.119193] zbud: loaded
[    1.172362] Key type asymmetric registered
[    1.172364] Asymmetric key parser 'x509' registered
[    1.172391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.172425] io scheduler noop registered
[    1.172426] io scheduler deadline registered
[    1.172439] io scheduler cfq registered (default)
[    1.172907] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.172914] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.172925] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.172926] vesafb: scrolling: redraw
[    1.172927] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.172935] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[    1.172945] vesafb: framebuffer at 0xb0000000, mapped to 0xffff9d43c1800000, using 4160k, total 4160k
[    1.173052] Console: switching to colour frame buffer device 170x48
[    1.173069] fb0: VESA VGA frame buffer device
[    1.173082] intel_idle: MWAIT substates: 0x21120
[    1.173083] intel_idle: v0.4.1 model 0x2A
[    1.173268] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.173470] GHES: HEST is not enabled!
[    1.173529] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.174012] Linux agpgart interface v0.103
[    1.174060] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.174061] AMD IOMMUv2 functionality not available on this system
[    1.174453] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.175872] i8042: Detected active multiplexing controller, rev 1.1
[    1.176526] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.176539] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.176542] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.176544] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.176546] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.176675] mousedev: PS/2 mouse device common for all mice
[    1.176713] rtc_cmos 00:01: RTC can wake from S4
[    1.176867] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.176896] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.176909] intel_pstate: Intel P-state driver initializing
[    1.177128] ledtrig-cpu: registered to indicate activity on CPUs
[    1.178074] NET: Registered protocol family 10
[    1.178709] mip6: Mobile IPv6
[    1.178713] NET: Registered protocol family 17
[    1.178719] mpls_gso: MPLS GSO support
[    1.179342] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.179588] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.179962] registered taskstats version 1
[    1.179965] Loading compiled-in X.509 certificates
[    1.184251] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.185151] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.185204] zswap: loaded using pool lzo/zbud
[    1.186097] rtc_cmos 00:01: setting system clock to 2017-04-26 08:53:42 UTC (1493196822)
[    1.186297] PM: Hibernation image not present or could not be loaded.
[    1.189935] Freeing unused kernel memory: 1340K (ffffffffbdd1d000 - ffffffffbde6c000)
[    1.189938] Write protecting the kernel read-only data: 12288k
[    1.191312] Freeing unused kernel memory: 1960K (ffff910785c16000 - ffff910785e00000)
[    1.197363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.199426] Freeing unused kernel memory: 1244K (ffff9107860c9000 - ffff910786200000)
[    1.214363] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.242379] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.242526] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.242545] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.242565] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.243942] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.244005] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246021] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246120] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246210] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.246303] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.277971] button: module verification failed: signature and/or required key missing - tainting kernel
[    1.278312] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[    1.278318] ACPI: Power Button [PWRB]
[    1.278582] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[    1.278586] ACPI: Sleep Button [SLPB]
[    1.278721] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[    1.278750] ACPI: Lid Switch [LID]
[    1.278829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[    1.278832] ACPI: Power Button [PWRF]
[    1.281450] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.288295] wmi: Mapper loaded
[    1.325931] [drm] Initialized
[    1.327261] ACPI: bus type USB registered
[    1.327303] usbcore: registered new interface driver usbfs
[    1.327320] usbcore: registered new interface driver hub
[    1.328590] usbcore: registered new device driver usb
[    1.329385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.329921] ehci-pci: EHCI PCI platform driver
[    1.330149] thermal LNXTHERM:00: registered as thermal_zone0
[    1.330151] ACPI: Thermal Zone [THRM] (62 C)
[    1.330819] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.330836] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.330866] ehci-pci 0000:00:1a.0: debug port 2
[    1.334810] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.334832] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0709000
[    1.340755] SCSI subsystem initialized
[    1.341415] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24
[    1.342529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.342538] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.343466] r8169 0000:04:00.2 eth0: RTL8411 at 0xffff9d43c0cf9000, 08:9e:01:08:22:81, XID 08800800 IRQ 25
[    1.343469] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.345770] libata version 3.00 loaded.
[    1.349686] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.349800] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.349802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.349804] usb usb1: Product: EHCI Host Controller
[    1.349806] usb usb1: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.349808] usb usb1: SerialNumber: 0000:00:1a.0
[    1.350039] hub 1-0:1.0: USB hub found
[    1.350053] hub 1-0:1.0: 2 ports detected
[    1.350451] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.350460] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.350475] ehci-pci 0000:00:1d.0: debug port 2
[    1.354403] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.354428] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0708000
[    1.369667] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.369827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.369829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.369832] usb usb2: Product: EHCI Host Controller
[    1.369834] usb usb2: Manufacturer: Linux 4.9.0-deepin4-amd64 ehci_hcd
[    1.369836] usb usb2: SerialNumber: 0000:00:1d.0
[    1.370102] hub 2-0:1.0: USB hub found
[    1.370116] hub 2-0:1.0: 2 ports detected
[    1.370939] [drm] Memory usable by graphics device = 2048M
[    1.370942] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    1.370944] fb: switching to inteldrmfb from VESA VGA
[    1.370978] Console: switching to colour dummy device 80x25
[    1.371071] [drm] Replacing VGA console driver
[    1.377709] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.377711] [drm] Driver supports precise vblank timestamp query.
[    1.380190] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.409097] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.409380] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    1.409423] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    1.409945] ahci 0000:00:1f.2: version 3.0
[    1.419562] fbcon: inteldrmfb (fb0) is primary device
[    1.419677] Console: switching to colour frame buffer device 170x48
[    1.419708] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.420311] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[    1.420315] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.439767] scsi host0: ahci
[    1.443288] r8169 0000:04:00.2 enp4s0f2: renamed from eth0
[    1.447614] scsi host1: ahci
[    1.452323] scsi host2: ahci
[    1.454245] scsi host3: ahci
[    1.458436] scsi host4: ahci
[    1.458629] scsi host5: ahci
[    1.458745] ata1: SATA max UDMA/133 abar m2048@0xc0707000 port 0xc0707100 irq 27
[    1.458747] ata2: DUMMY
[    1.458748] ata3: DUMMY
[    1.458750] ata4: DUMMY
[    1.458751] ata5: DUMMY
[    1.458754] ata6: SATA max UDMA/133 abar m2048@0xc0707000 port 0xc0707380 irq 27
[    1.677765] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.697746] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.773322] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.774291] ata1.00: ATA-9: ADATA SP550, O0730A, max UDMA/133
[    1.774297] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.775219] ata1.00: configured for UDMA/133
[    1.776016] scsi 0:0:0:0: Direct-Access     ATA      ADATA SP550      0A   PQ: 0 ANSI: 5
[    1.777543] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.815787] ata6.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[    1.815794] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.826547] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.826554] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.827202] hub 1-1:1.0: USB hub found
[    1.827326] hub 1-1:1.0: 6 ports detected
[    1.846546] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.846552] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.847207] hub 2-1:1.0: USB hub found
[    1.847328] hub 2-1:1.0: 8 ports detected
[    1.861375] ata6.00: configured for UDMA/133
[    1.862056] scsi 5:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
[    1.877559] random: fast init done
[    1.925731] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.925751] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.925753] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    1.925912] sd 5:0:0:0: [sdb] Write Protect is off
[    1.925915] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.925950] sd 0:0:0:0: [sda] Write Protect is off
[    1.925953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.926248] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.926320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.927839]  sda: sda1 sda2
[    1.928403] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.972178]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    1.973703] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.019640] psmouse serio2: synaptics: queried max coordinates: x [..5774], y [..5028]
[    2.046829] psmouse serio2: synaptics: queried min coordinates: x [1168..], y [880..]
[    2.097459] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00e33/0x240000/0xa2400/0x0, board id: 540, fw id: 1063070
[    2.113743] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.130261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input13
[    2.133716] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[    2.149746] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.149770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.245226] usb 2-1.2: New USB device found, idVendor=24ae, idProduct=2000
[    2.245233] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.245237] usb 2-1.2: Product: RAPOO 2.4G Wireless Device
[    2.245241] usb 2-1.2: Manufacturer: RAPOO
[    2.253893] hidraw: raw HID events driver (C) Jiri Kosina
[    2.259353] usbcore: registered new interface driver usbhid
[    2.259356] usbhid: USB HID core driver
[    2.262078] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2000.0001/input/input17
[    2.278623] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c18
[    2.278629] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.278633] usb 1-1.1: Product: HD WebCam
[    2.278636] usb 1-1.1: Manufacturer: NC.21411.00X229552A9LM0009
[    2.322340] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1d.0-1.2/input0
[    2.323153] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2000.0002/input/input18
[    2.382255] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1d.0-1.2/input1
[    2.459953] md: linear personality registered for level -1
[    2.462497] md: multipath personality registered for level -4
[    2.464637] md: raid0 personality registered for level 0
[    2.467036] md: raid1 personality registered for level 1
[    2.537702] raid6: sse2x1   gen()  4575 MB/s
[    2.605700] raid6: sse2x1   xor()  2181 MB/s
[    2.673686] raid6: sse2x2   gen()  5453 MB/s
[    2.741685] raid6: sse2x2   xor()  5132 MB/s
[    2.809691] raid6: sse2x4   gen()  8479 MB/s
[    2.877706] raid6: sse2x4   xor()  6283 MB/s
[    2.877707] raid6: using algorithm sse2x4 gen() 8479 MB/s
[    2.877708] raid6: .... xor() 6283 MB/s, rmw enabled
[    2.877710] raid6: using ssse3x2 recovery algorithm
[    2.878282] xor: automatically using best checksumming function   avx       
[    2.878593] async_tx: api initialized (async)
[    2.885243] md: raid6 personality registered for level 6
[    2.885249] md: raid5 personality registered for level 5
[    2.885252] md: raid4 personality registered for level 4
[    2.890506] md: raid10 personality registered for level 10
[    3.173844] clocksource: Switched to clocksource tsc
[    3.582621] Btrfs loaded, crc32c=crc32c-intel
[    3.946897] fuse init (API version 7.26)
[    4.147687] loop: module loaded
[    4.264419] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[    4.264539] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
[    4.281227] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[    4.281230] EXT4-fs (loop0): write access will be enabled during recovery
[    5.252478] random: crng init done
[    5.668008] EXT4-fs (loop0): recovery complete
[    5.710677] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    6.858169] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.858356] systemd[1]: Detected architecture x86-64.
[    6.870064] systemd[1]: Set hostname to <DESKTOP-CT2281M>.
[    6.966292] systemd-fstab-generator[888]: Checking was requested for "/deepin/disks/root.disk", but it is not a device.
[    7.880384] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.880527] systemd[1]: Reached target User and Group Name Lookups.
[    7.880637] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.880666] systemd[1]: Reached target Encrypted Volumes.
[    7.880759] systemd[1]: Listening on udev Control Socket.
[    7.880843] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.880902] systemd[1]: Listening on udev Kernel Socket.
[    8.539692] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[    8.623289] lp: driver loaded but no devices found
[    8.671333] ppdev: user-space parallel port driver
[    8.880955] systemd-journald[899]: Received request to flush runtime journal from PID 1
[    8.948316] bbswitch: loading out-of-tree module taints kernel.
[    8.948565] bbswitch: version 0.8
[    8.948571] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    8.948575] bbswitch: No discrete VGA device found
[    9.098806] livepatch: enabling patch 'block_sogou'
[    9.353649] systemd-journald[899]: File /var/log/journal/97a47d9730c74db0aa996f72a7f421b3/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.191077] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[   10.191111] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   10.191138] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   10.191189] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   10.203853] bcma: bus0: Bus registered
[   10.306332] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19
[   10.344627] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.801444] ACPI: Battery Slot [BAT1] (battery absent)
[   10.870324] ACPI: AC Adapter [ACAD] (on-line)
[   11.148038] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   11.148049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.148053] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   11.148060] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.148061] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   11.148067] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.148068] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   11.148074] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.148075] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.211037] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.302273] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   11.525618] input: PC Speaker as /devices/platform/pcspkr/input/input19
[   11.586536] brcmsmac bcma0:1 wlp9s0b1: renamed from wlan0
[   11.642564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.642659] sd 5:0:0:0: Attached scsi generic sg1 type 0
[   11.824508] acer_wmi: Acer Laptop ACPI-WMI Extras
[   11.824521] acer_wmi: Function bitmap for Communication Button: 0x1
[   11.838414] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[   11.838481] input: Acer WMI hotkeys as /devices/virtual/input/input20
[   11.838850] input: Acer BMA150 accelerometer as /devices/virtual/input/input21
[   11.951550] psmouse serio2: TouchPad at isa0060/serio2/input0 lost sync at byte 1
[   11.960011] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   11.960016] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.960019] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.960020] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.267414] iTCO_vendor_support: vendor-support=0
[   13.332033] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.332123] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   13.332426] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.339644] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC271X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.339648] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.339651] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.339653] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   13.339655] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   13.339658] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   13.339660] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   13.362336] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   13.429409] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   13.430501] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   13.430635] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[   13.430764] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[   13.491691] media: Linux media interface: v0.10
[   13.640787] Linux video capture interface: v2.00
[   13.969414] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c18)
[   13.978083] uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[   13.978087] uvcvideo 1-1.1:1.0: Entity type for entity Extension 3 was not initialized!
[   13.978089] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   13.978091] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   13.978216] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input26
[   13.978302] usbcore: registered new interface driver uvcvideo
[   13.978303] USB Video Class driver (1.1.1)
[   14.165443] intel_rapl: Found RAPL domain package
[   14.165446] intel_rapl: Found RAPL domain core
[   14.165448] intel_rapl: Found RAPL domain uncore
[   14.165457] intel_rapl: RAPL package 0 domain package locked by BIOS
[   17.141888] systemd-fstab-generator[2005]: Checking was requested for "/deepin/disks/root.disk", but it is not a device.
[   17.314197] systemd-fstab-generator[2031]: Checking was requested for "/deepin/disks/root.disk", but it is not a device.
[   23.112417] NET: Registered protocol family 15
[   23.149723] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[   23.518165] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[   23.539088] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[   23.568909] Initializing XFRM netlink socket
[   23.765210] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   23.765260] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   23.765906] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[   23.770674] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[   23.915482] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[   24.005594] r8169 0000:04:00.2 enp4s0f2: link down
[   24.005602] r8169 0000:04:00.2 enp4s0f2: link down
[   24.005664] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[   25.672343] r8169 0000:04:00.2 enp4s0f2: link up
[   25.672361] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f2: link becomes ready
[   25.771525] blk_update_request: I/O error, dev loop0, sector 42732624
[   26.224247] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[   27.854730] blk_update_request: I/O error, dev loop0, sector 42732632
[   28.111359] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[   28.117803] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[   28.806792] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[   29.830869] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[   30.822867] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[   33.421270] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[   33.422657] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[   33.422842] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[   34.823030] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[   35.815034] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[   38.827602] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[   38.830672] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[   38.830729] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[   39.815228] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[   40.807369] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[   42.507920] blk_update_request: I/O error, dev loop0, sector 201656
[   42.600759] blk_update_request: I/O error, dev loop0, sector 201696
[   42.619684] blk_update_request: I/O error, dev loop0, sector 201728
[   44.300238] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[   44.303051] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[   44.303120] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[   44.839478] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[   45.831509] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[   46.803339] blk_update_request: I/O error, dev loop0, sector 42905616
[   52.424390] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[   53.400988] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[   53.403474] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[   53.403578] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[   54.807733] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[   55.831191] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[   59.490900] blk_update_request: I/O error, dev loop0, sector 13099024
[   59.908533] blk_update_request: I/O error, dev loop0, sector 42901520
[   60.202384] blk_update_request: I/O error, dev loop0, sector 13099040
[   60.564342] blk_update_request: I/O error, dev loop0, sector 42905624
[   60.959978] blk_update_request: I/O error, dev loop0, sector 42905640
[   64.189123] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[   64.542886] blk_update_request: I/O error, dev loop0, sector 42897560
[   65.466617] blk_update_request: I/O error, dev loop0, sector 42901552
[   66.168875] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[   66.175313] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[   66.175373] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[   66.759766] blk_update_request: I/O error, dev loop0, sector 13099112
[   66.828284] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[   67.678782] wlp9s0b1: authenticated
[   67.680280] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 1/3)
[   68.840360] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 2/3)
[   69.832397] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 3/3)
[   70.291436] blk_update_request: I/O error, dev loop0, sector 42897656
[   70.448489] blk_update_request: I/O error, dev loop0, sector 13099192
[   70.851698] wlp9s0b1: association with c8:3a:35:03:2f:70 timed out
[   71.300003] blk_update_request: I/O error, dev loop0, sector 42905760
[   71.452615] blk_update_request: I/O error, dev loop0, sector 42897672
[   74.046586] blk_update_request: I/O error, dev loop0, sector 202288
[   74.047346] blk_update_request: I/O error, dev loop0, sector 202336
[   83.323275] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[   83.324685] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[   84.809074] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[   85.833024] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[   86.857250] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[   91.930104] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[   91.932940] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[   91.933007] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[   92.841386] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[   93.833332] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[   99.577294] blk_update_request: I/O error, dev loop0, sector 13099072
[   99.591599] blk_update_request: I/O error, dev loop0, sector 42901560
[  106.267332] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  106.268781] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  106.268852] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  106.817878] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  107.817939] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  108.667234] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  112.702707] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  112.745626] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  112.750860] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  113.834235] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  114.826160] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  115.850270] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  138.020714] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  139.917602] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  139.923286] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  139.923397] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  140.811305] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  141.835231] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  144.025442] QDBusConnection[2979]: segfault at 7fab21420075 ip 00007fab2240b7af sp 00007fab0a4678c0 error 4 in libQt5Core.so.5.6.1[7fab22155000+4c6000]
[  154.252528] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  154.254487] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  154.254584] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  154.827842] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  155.812392] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  155.816462] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  158.274116] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  158.275469] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  158.275524] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  158.625711] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  158.628018] wlp9s0b1: aborting authentication with 80:89:17:cd:b2:26 by local choice (Reason: 3=DEAUTH_LEAVING)
[  161.056755] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  161.063348] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  161.063414] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  161.836141] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  162.796057] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  175.233548] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  175.236223] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  175.236273] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  175.820638] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  175.831894] wlp9s0b1: authenticated
[  175.832594] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 1/3)
[  176.844630] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 2/3)
[  177.836686] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 3/3)
[  178.860716] wlp9s0b1: association with c8:3a:35:03:2f:70 timed out
[  181.000397] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  207.347690] blk_update_request: I/O error, dev loop0, sector 202848
[  207.348315] blk_update_request: I/O error, dev loop0, sector 202888
[  273.261529] blk_update_request: I/O error, dev loop0, sector 13099824
[  279.503370] blk_update_request: I/O error, dev loop0, sector 42901848
[  279.690331] blk_update_request: I/O error, dev loop0, sector 42901856
[  279.756990] blk_update_request: I/O error, dev loop0, sector 13099872
[  280.011871] blk_update_request: I/O error, dev loop0, sector 42906144
[  280.074649] blk_update_request: I/O error, dev loop0, sector 42898272
[  292.735611] blk_update_request: I/O error, dev loop0, sector 42906216
[  294.005292] rtsx_pci 0000:04:00.0: VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  294.012417] r8169 0000:04:00.2: invalid short VPD tag 00 at offset 1
[  294.326194] Bluetooth: Core ver 2.22
[  294.326312] NET: Registered protocol family 31
[  294.326313] Bluetooth: HCI device and connection manager initialized
[  294.326318] Bluetooth: HCI socket layer initialized
[  294.326322] Bluetooth: L2CAP socket layer initialized
[  294.326330] Bluetooth: SCO socket layer initialized
[  297.804445] blk_update_request: I/O error, dev loop0, sector 13100152
[  314.474858] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  314.477969] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  315.826181] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  316.346365] wlp9s0b1: authenticated
[  316.350231] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 1/3)
[  317.842315] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 2/3)
[  318.866282] wlp9s0b1: associate with c8:3a:35:03:2f:70 (try 3/3)
[  319.826289] wlp9s0b1: association with c8:3a:35:03:2f:70 timed out
[  325.018961] blk_update_request: I/O error, dev loop0, sector 42898536
[  332.304378] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  332.306961] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  332.828954] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  333.842872] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  334.866990] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  340.976132] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  340.977794] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  340.977892] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  341.839750] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  342.835206] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  344.576510] blk_update_request: I/O error, dev loop0, sector 4288960
[  345.579219] blk_update_request: I/O error, dev loop0, sector 13100440
[  355.268715] wlp9s0b1: authenticate with c8:3a:35:03:2f:70
[  355.271362] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 1/3)
[  355.271439] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 2/3)
[  355.827738] wlp9s0b1: send auth to c8:3a:35:03:2f:70 (try 3/3)
[  356.819851] wlp9s0b1: authentication with c8:3a:35:03:2f:70 timed out
[  364.029294] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  365.921630] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  365.928284] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  365.928347] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  366.804152] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  367.828263] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  380.297365] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  380.300321] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  380.300437] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  380.820715] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  381.844853] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  391.061699] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  391.942061] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  391.944726] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  391.944788] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  392.820555] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  393.843917] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  406.314506] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  406.317083] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  406.317196] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  406.869781] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  407.861829] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  416.031631] IPv6: ADDRCONF(NETDEV_UP): wlp9s0b1: link is not ready
[  417.963826] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  417.965859] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  417.966421] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  418.838209] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  419.830263] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
[  421.373658] blk_update_request: I/O error, dev loop0, sector 4292496
[  421.442584] blk_update_request: I/O error, dev loop0, sector 203384
[  432.304566] wlp9s0b1: authenticate with 80:89:17:cd:b2:26
[  432.307389] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 1/3)
[  432.307468] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 2/3)
[  432.854821] wlp9s0b1: send auth to 80:89:17:cd:b2:26 (try 3/3)
[  433.846893] wlp9s0b1: authentication with 80:89:17:cd:b2:26 timed out
