[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-2-deepin-amd64 (yangbo@deepin.com) (gcc version 5.3.1 20151219 (Debian 5.3.1-4) ) #1 SMP Deepin 4.4.6-4 (2016-07-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=f2a1dda1-c35a-4bee-a463-04ef331f0974 ro splash quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000076915fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076916000-0x000000007698ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076990000-0x00000000769a3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000769a4000-0x000000007767bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007767c000-0x000000007799bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007799c000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: THTF THTF  Series/NSBW1401, BIOS N.1.19 12/04/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07A800000 mask FFF800000 uncachable
[    0.000000]   2 base 07B000000 mask FFF000000 uncachable
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask F80000000 write-back
[    0.000000]   5 base 090000000 mask FF0000000 write-through
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcab0-0x000fcabf] mapped at [ffff8800000fcab0]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] BRK [0x01d2a000, 0x01d2afff] PGTABLE
[    0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[    0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] BRK [0x01d2f000, 0x01d2ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33478000-0x35a33fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 THTFPC)
[    0.000000] ACPI: XSDT 0x0000000076994088 000094 (v01 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000769A25D8 00010C (v05 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-623)
[    0.000000] ACPI: DSDT 0x00000000769941B0 00E424 (v02 THTFPC TONGFANG 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007767BE80 000040
[    0.000000] ACPI: APIC 0x00000000769A26E8 000084 (v03 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000769A2770 000044 (v01 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000769A27B8 00009C (v01 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: MSDM 0x00000000769A2858 000055 (v03 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000769A28B0 00003C (v01 THTFPC TONGFANG 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000769A28F0 000176 (v01 THTFPC TONGFANG 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000769A2A68 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000769A31D0 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000769A3460 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000769A35E0 000042 (v01 THTFPC TONGFANG 00000000      00000000)
[    0.000000] ACPI: LPIT 0x00000000769A3628 000104 (v01 THTFPC TONGFANG 00000005 MSFT 0100000D)
[    0.000000] ACPI: TPM2 0x00000000769A3730 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: CSRT 0x00000000769A3768 00014C (v00 INTEL  LANFORDC 00000005 MSFT 0100000D)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x0000000076915fff]
[    0.000000]   node   0: [mem 0x000000007799c000-0x0000000077ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1010965
[    0.000000]   DMA32 zone: 7605 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 486677 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7ae00000-0x7edfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76916000-0x7698ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76990000-0x769a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x769a4000-0x7767bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7767c000-0x7799bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7adfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae00000-0x7edfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ee00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88017fc00000 s92888 r8192 d29992 u524288
[    0.000000] pcpu-alloc: s92888 r8192 d29992 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995147
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=f2a1dda1-c35a-4bee-a463-04ef331f0974 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3861400K/4043860K available (5712K kernel code, 1066K rwdata, 2856K rodata, 1308K init, 828K bss, 182460K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1599.998 MHz processor
[    0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.99 BogoMIPS (lpj=6399992)
[    0.000047] pid_max: default: 32768 minimum: 301
[    0.000064] ACPI: Core revision 20150930
[    0.027709] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.027766] Security Framework initialized
[    0.027772] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.027786] AppArmor: AppArmor disabled by boot time parameter
[    0.028326] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.030548] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.031547] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.031562] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.032012] Initializing cgroup subsys io
[    0.032024] Initializing cgroup subsys memory
[    0.032144] Disabling memory control group subsystem
[    0.032147] Initializing cgroup subsys devices
[    0.032155] Initializing cgroup subsys freezer
[    0.032161] Initializing cgroup subsys net_cls
[    0.032169] Initializing cgroup subsys perf_event
[    0.032175] Initializing cgroup subsys net_prio
[    0.032181] Initializing cgroup subsys pids
[    0.032214] CPU: Physical Processor ID: 0
[    0.032218] CPU: Processor Core ID: 0
[    0.032224] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.032227] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037655] mce: CPU supports 6 MCE banks
[    0.037670] CPU0: Thermal monitoring enabled (TM1)
[    0.037676] process: using mwait in idle threads
[    0.037683] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.037686] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.038079] Freeing SMP alternatives memory: 24K (ffffffff81c53000 - ffffffff81c59000)
[    0.040413] ftrace: allocating 23691 entries in 93 pages
[    0.055681] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.095400] TSC deadline timer enabled
[    0.095407] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.095464] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.095483] ... version:                3
[    0.095486] ... bit width:              40
[    0.095488] ... generic registers:      2
[    0.095490] ... value mask:             000000ffffffffff
[    0.095493] ... max period:             000000ffffffffff
[    0.095495] ... fixed-purpose events:   3
[    0.095497] ... event mask:             0000000700000003
[    0.096788] x86: Booting SMP configuration:
[    0.096794] .... node  #0, CPUs:      #1
[    0.104537] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.104814]  #2 #3
[    0.120155] x86: Booted up 1 node, 4 CPUs
[    0.120161] smpboot: Total of 4 processors activated (12799.98 BogoMIPS)
[    0.121198] devtmpfs: initialized
[    0.129982] PM: Registering ACPI NVS region [mem 0x769a4000-0x7767bfff] (13467648 bytes)
[    0.130887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.131077] pinctrl core: initialized pinctrl subsystem
[    0.131456] NET: Registered protocol family 16
[    0.140822] cpuidle: using governor ladder
[    0.152833] cpuidle: using governor menu
[    0.152969] ACPI: bus type PCI registered
[    0.152974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153135] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.153141] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.153178] PCI: Using configuration type 1 for base access
[    0.173764] ACPI: Added _OSI(Module Device)
[    0.173770] ACPI: Added _OSI(Processor Device)
[    0.173773] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.173776] ACPI: Added _OSI(Processor Aggregator Device)
[    0.191097] ACPI: Dynamic OEM Table Load:
[    0.191111] ACPI: SSDT 0xFFFF88017B49B800 000613 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.192469] ACPI: Dynamic OEM Table Load:
[    0.192480] ACPI: SSDT 0xFFFF88017A9A0000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.194363] ACPI: Dynamic OEM Table Load:
[    0.194373] ACPI: SSDT 0xFFFF88017B496E00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.195664] ACPI: Dynamic OEM Table Load:
[    0.195673] ACPI: SSDT 0xFFFF88017A9A4C40 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.198847] ACPI : EC: EC started
[    0.200200] ACPI: Interpreter enabled
[    0.200216] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.200228] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.200262] ACPI: (supports S0 S3 S4 S5)
[    0.200265] ACPI: Using IOAPIC for interrupt routing
[    0.200344] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203338] ACPI: Power Resource [ID3C] (on)
[    0.205547] ACPI: Power Resource [USBC] (on)
[    0.218073] ACPI: Power Resource [CLK0] (off)
[    0.218704] ACPI: Power Resource [CLK0] (off)
[    0.218816] ACPI: Power Resource [CLK1] (off)
[    0.229414] ACPI: Power Resource [FN00] (off)
[    0.230594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.230608] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.231202] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.232204] PCI host bridge to bus 0000:00
[    0.232212] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.232217] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.232222] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.232227] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.232231] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.232236] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.232241] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.232246] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.232251] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.232266] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.232598] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.232636] pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
[    0.232651] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.232663] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.232970] pci 0000:00:10.0: [8086:2294] type 00 class 0x080501
[    0.233005] pci 0000:00:10.0: reg 0x10: [mem 0x81217000-0x81217fff]
[    0.233110] pci 0000:00:10.0: PME# supported from D0 D3hot
[    0.233356] pci 0000:00:12.0: [8086:2296] type 00 class 0x080501
[    0.233392] pci 0000:00:12.0: reg 0x10: [mem 0x81216000-0x81216fff]
[    0.233495] pci 0000:00:12.0: PME# supported from D0 D3hot
[    0.233772] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.233850] pci 0000:00:13.0: reg 0x20: [io  0xf060-0xf07f]
[    0.233865] pci 0000:00:13.0: reg 0x24: [mem 0x81215000-0x812157ff]
[    0.233920] pci 0000:00:13.0: PME# supported from D3hot
[    0.234167] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.234211] pci 0000:00:14.0: reg 0x10: [mem 0x81200000-0x8120ffff 64bit]
[    0.234305] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.234496] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.234605] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.234644] pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff]
[    0.234658] pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff]
[    0.234745] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.235056] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.235107] pci 0000:00:1b.0: reg 0x10: [mem 0x81210000-0x81213fff 64bit]
[    0.235205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.235372] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.235631] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.237126] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237502] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.237759] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.239329] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.239768] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.239881] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.240241] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.240322] pci 0000:00:1f.3: reg 0x10: [mem 0x81214000-0x8121401f]
[    0.240440] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.241421] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.242233] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.245370] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.245536] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.245701] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.245865] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.246033] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.246198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.246361] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.246522] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.248299] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.248408] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.248660] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.248665] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.248672] vgaarb: loaded
[    0.248675] vgaarb: bridge control possible 0000:00:02.0
[    0.248913] PCI: Using ACPI for IRQ routing
[    0.259870] PCI: pci_cache_line_size set to 64 bytes
[    0.260017] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.260022] e820: reserve RAM buffer [mem 0x76916000-0x77ffffff]
[    0.260385] clocksource: Switched to clocksource refined-jiffies
[    0.273709] pnp: PnP ACPI init
[    0.273844] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.274402] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.274408] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.274414] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.274421] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274563] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.275150] pnp 00:03: Plug and Play ACPI device, IDs ETD043e ETD0000 PNP0f13 (active)
[    0.277542] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277655] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.277662] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.277667] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.277672] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.277677] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.277682] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.277687] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.277692] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.277697] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.277704] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278915] pnp: PnP ACPI: found 6 devices
[    0.288392] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.288426] clocksource: Switched to clocksource acpi_pm
[    0.288583] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.288591] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.288597] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.288732] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.288738] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.288744] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.288757] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.288763] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.288768] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.288773] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.288778] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.288783] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.288788] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.288793] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.288798] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.288803] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.288808] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.288812] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.288826] pci 0000:00:1c.0: BAR 14: assigned [mem 0x81300000-0x814fffff]
[    0.288838] pci 0000:00:1c.0: BAR 15: assigned [mem 0x81500000-0x816fffff 64bit pref]
[    0.288845] pci 0000:00:1c.1: BAR 14: assigned [mem 0x81700000-0x818fffff]
[    0.288856] pci 0000:00:1c.1: BAR 15: assigned [mem 0x81900000-0x81afffff 64bit pref]
[    0.288863] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.288869] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.288877] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.288903] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.288994] pci 0000:00:1c.0:   bridge window [mem 0x81300000-0x814fffff]
[    0.289059] pci 0000:00:1c.0:   bridge window [mem 0x81500000-0x816fffff 64bit pref]
[    0.289191] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.289217] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.289284] pci 0000:00:1c.1:   bridge window [mem 0x81700000-0x818fffff]
[    0.289330] pci 0000:00:1c.1:   bridge window [mem 0x81900000-0x81afffff 64bit pref]
[    0.289420] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.289424] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.289429] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.289433] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.289437] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.289441] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.289446] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.289450] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.289455] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.289459] pci_bus 0000:01: resource 1 [mem 0x81300000-0x814fffff]
[    0.289463] pci_bus 0000:01: resource 2 [mem 0x81500000-0x816fffff 64bit pref]
[    0.289467] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.289471] pci_bus 0000:02: resource 1 [mem 0x81700000-0x818fffff]
[    0.289476] pci_bus 0000:02: resource 2 [mem 0x81900000-0x81afffff 64bit pref]
[    0.289679] NET: Registered protocol family 2
[    0.290091] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.290262] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.290446] TCP: Hash tables configured (established 32768 bind 32768)
[    0.290522] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.290572] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.290838] NET: Registered protocol family 1
[    0.290877] pci 0000:00:02.0: Video device with shadowed ROM
[    0.293116] PCI: CLS 64 bytes, default 64
[    0.293242] Unpacking initramfs...
[    1.453105] Freeing initrd memory: 38640K (ffff880033478000 - ffff880035a34000)
[    1.453128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.453133] software IO TLB [mem 0x72916000-0x76916000] (64MB) mapped at [ffff880072916000-ffff880076915fff]
[    1.454178] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.454262] audit: initializing netlink subsys (disabled)
[    1.454304] audit: type=2000 audit(1491360235.447:1): initialized
[    1.455372] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.455434] zbud: loaded
[    1.455779] VFS: Disk quotas dquot_6.6.0
[    1.455827] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.457617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.457756] io scheduler noop registered
[    1.457762] io scheduler deadline registered
[    1.457806] io scheduler cfq registered (default)
[    1.461126] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.461175] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.461462] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.461509] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.461528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.461614] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.461761] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    1.461843] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.461984] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    1.461999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.462058] intel_idle: MWAIT substates: 0x33000020
[    1.462062] intel_idle: v0.4 model 0x4C
[    1.462065] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.462581] GHES: HEST is not enabled!
[    1.462783] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.464054] Linux agpgart interface v0.103
[    1.464170] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.464174] AMD IOMMUv2 functionality not available on this system
[    1.465045] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELAN] at 0x60,0x64 irq 1,12
[    1.476008] i8042: Detected active multiplexing controller, rev 1.1
[    1.482542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.482559] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.482584] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.482590] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.482595] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.484712] mousedev: PS/2 mouse device common for all mice
[    1.484878] rtc_cmos 00:00: RTC can wake from S4
[    1.485728] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.485793] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
[    1.485831] Intel P-state driver initializing.
[    1.486703] ledtrig-cpu: registered to indicate activity on CPUs
[    1.490373] NET: Registered protocol family 10
[    1.492230] mip6: Mobile IPv6
[    1.492262] NET: Registered protocol family 17
[    1.492310] mpls_gso: MPLS GSO support
[    1.493927] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x353
[    1.494086] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x353
[    1.494114] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x353
[    1.494137] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x353
[    1.494324] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.494647] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.496284] registered taskstats version 1
[    1.496457] zswap: loaded using pool lzo/zbud
[    1.499647] rtc_cmos 00:00: setting system clock to 2017-04-05 02:43:56 UTC (1491360236)
[    1.500003] PM: Hibernation image not present or could not be loaded.
[    1.504759] Freeing unused kernel memory: 1308K (ffffffff81b0c000 - ffffffff81c53000)
[    1.504767] Write protecting the kernel read-only data: 10240k
[    1.506645] Freeing unused kernel memory: 420K (ffff880001597000 - ffff880001600000)
[    1.513311] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.513319] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.515649] Freeing unused kernel memory: 1240K (ffff8800018ca000 - ffff880001a00000)
[    1.533844] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.584456] random: systemd-udevd urandom read with 16 bits of entropy available
[    1.646147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.646159] ACPI: Power Button [PWRB]
[    1.646285] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    1.646291] ACPI: Sleep Button [SLPB]
[    1.646407] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    1.646462] ACPI: Lid Switch [LID1]
[    1.646571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    1.646577] ACPI: Power Button [PWRF]
[    1.657398] sdhci: Secure Digital Host Controller Interface driver
[    1.657404] sdhci: Copyright(c) Pierre Ossman
[    1.663401] hidraw: raw HID events driver (C) Jiri Kosina
[    1.671180] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.688368] wmi: Mapper loaded
[    1.690520] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 21)
[    1.691596] sdhci-pci 0000:00:10.0: No vmmc regulator found
[    1.691601] sdhci-pci 0000:00:10.0: No vqmmc regulator found
[    1.693666] SCSI subsystem initialized
[    1.693970] thermal LNXTHERM:00: registered as thermal_zone0
[    1.693977] ACPI: Thermal Zone [TZ01] (32 C)
[    1.694719] ACPI: bus type USB registered
[    1.694772] usbcore: registered new interface driver usbfs
[    1.694799] usbcore: registered new interface driver hub
[    1.694854] usbcore: registered new device driver usb
[    1.697446] mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
[    1.697700] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 21)
[    1.697932] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    1.699244] [drm] Initialized drm 1.1.0 20060810
[    1.699444] sdhci-pci 0000:00:12.0: No vmmc regulator found
[    1.699450] sdhci-pci 0000:00:12.0: No vqmmc regulator found
[    1.700990] libata version 3.00 loaded.
[    1.703164] mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
[    1.703951] ahci 0000:00:13.0: version 3.0
[    1.704242] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.704248] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst 
[    1.710489] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.710496] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.713793] scsi host0: ahci
[    1.714162] scsi host1: ahci
[    1.714304] ata1: SATA max UDMA/133 abar m2048@0x81215000 port 0x81215100 irq 117
[    1.714309] ata2: SATA max UDMA/133 abar m2048@0x81215000 port 0x81215180 irq 117
[    1.714893] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.714909] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.716093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.716119] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.718787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.718792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.718795] usb usb1: Product: xHCI Host Controller
[    1.718798] usb usb1: Manufacturer: Linux 4.4.0-2-deepin-amd64 xhci-hcd
[    1.718801] usb usb1: SerialNumber: 0000:00:14.0
[    1.719197] hub 1-0:1.0: USB hub found
[    1.719399] hub 1-0:1.0: 7 ports detected
[    1.720719] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.720729] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.720828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.720832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720835] usb usb2: Product: xHCI Host Controller
[    1.720838] usb usb2: Manufacturer: Linux 4.4.0-2-deepin-amd64 xhci-hcd
[    1.720841] usb usb2: SerialNumber: 0000:00:14.0
[    1.721108] hub 2-0:1.0: USB hub found
[    1.721146] hub 2-0:1.0: 6 ports detected
[    1.723499] [drm] Memory usable by graphics device = 2048M
[    1.723506] [drm] Replacing VGA console driver
[    1.726382] Console: switching to colour dummy device 80x25
[    1.726951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.726954] [drm] Driver supports precise vblank timestamp query.
[    1.801444] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.864841] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.865387] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.865459] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.910770] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.910795] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.916765] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[    2.010472] fbcon: inteldrmfb (fb0) is primary device
[    2.036879] ata1: SATA link down (SStatus 4 SControl 300)
[    2.036949] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.044705] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.073078] ata2.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[    2.073082] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.110986] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.110993] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.173615] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.173621] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.173624] usb 1-1: Product: USB 2.0 Hub
[    2.175783] hub 1-1:1.0: USB hub found
[    2.176014] hub 1-1:1.0: 4 ports detected
[    2.202271] ata2.00: configured for UDMA/133
[    2.203592] scsi 1:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[    2.321967] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.321970] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.348442] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    2.452740] tsc: Refined TSC clocksource calibration: 1599.948 MHz
[    2.452752] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff3c37d3, max_idle_ns: 440795211487 ns
[    2.519417] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.519424] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.539101] usb 1-2: New USB device found, idVendor=093a, idProduct=2510
[    2.539108] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.539113] usb 1-2: Product: USB Optical Mouse
[    2.539116] usb 1-2: Manufacturer: PixArt
[    2.539787] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.549465] usbcore: registered new interface driver usbhid
[    2.549467] usbhid: USB HID core driver
[    2.552657] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:093A:2510.0001/input/input13
[    2.552883] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    2.604722] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[    2.712144] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8152
[    2.712149] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.712152] usb 1-1.4: Product: USB 10/100 LAN
[    2.712155] usb 1-1.4: Manufacturer: Realtek
[    2.712157] usb 1-1.4: SerialNumber: 00E04C360069
[    2.876684] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[    3.008003] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[    3.008009] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.008012] usb 1-4: Product: 802.11n WLAN Adapter
[    3.008014] usb 1-4: Manufacturer: Realtek
[    3.008017] usb 1-4: SerialNumber: 00e04c000001
[    3.176405] usb 1-5: new high-speed USB device number 6 using xhci_hcd
[    3.319904] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x495f00)
[    3.334772] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
[    3.350104] psmouse serio4: elantech: Elan sample query result 01, 78, 86
[    3.433084] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input14
[    3.456442] clocksource: Switched to clocksource tsc
[    3.528600] Console: switching to colour frame buffer device 170x48
[    3.536917] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.558203] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.558210] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    3.558300] sd 1:0:0:0: [sda] Write Protect is off
[    3.558305] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.558346] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.621195] usb 1-5: New USB device found, idVendor=1e4e, idProduct=0110
[    3.621206] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.621210] usb 1-5: Product: VGA Webcam
[    3.621214] usb 1-5: Manufacturer: Etron Technology, Inc.
[    3.636712]  sda: sda2 < sda5 sda6 sda7 > sda3 sda4
[    3.639032] sd 1:0:0:0: [sda] Attached SCSI disk
[    6.312654] raid6: sse2x1   gen()  1166 MB/s
[    6.380581] raid6: sse2x1   xor()  2207 MB/s
[    6.448545] raid6: sse2x2   gen()   836 MB/s
[    6.516631] raid6: sse2x2   xor()  2554 MB/s
[    6.584592] raid6: sse2x4   gen()  1233 MB/s
[    6.652562] raid6: sse2x4   xor()  1337 MB/s
[    6.652568] raid6: using algorithm sse2x4 gen() 1233 MB/s
[    6.652570] raid6: .... xor() 1337 MB/s, rmw enabled
[    6.652572] raid6: using ssse3x2 recovery algorithm
[    6.653676] xor: measuring software checksum speed
[    6.692564]    prefetch64-sse:  7006.000 MB/sec
[    6.732631]    generic_sse:  6123.000 MB/sec
[    6.732635] xor: using function: prefetch64-sse (7006.000 MB/sec)
[    6.742171] Btrfs loaded
[    6.942535] random: nonblocking pool is initialized
[    7.496658] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    8.547424] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.547818] systemd[1]: Detected architecture x86-64.
[    8.558696] systemd[1]: Set hostname to <mazefa-pc>.
[   10.188836] systemd[1]: Created slice User and Session Slice.
[   10.189035] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.189062] systemd[1]: Reached target Encrypted Volumes.
[   10.189115] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.189358] systemd[1]: Created slice System Slice.
[   10.189455] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.189488] systemd[1]: Reached target Remote File Systems (Pre).
[   10.189512] systemd[1]: Reached target Remote File Systems.
[   10.189594] systemd[1]: Listening on udev Control Socket.
[   10.189757] systemd[1]: Listening on Journal Audit Socket.
[   10.189846] systemd[1]: Listening on Journal Socket.
[   10.216901] systemd[1]: Mounting Huge Pages File System...
[   10.245269] systemd[1]: Starting Load Kernel Modules...
[   10.246797] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.246960] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.248548] systemd[1]: Starting Journal Service...
[   10.248600] systemd[1]: Reached target Slices.
[   10.248744] systemd[1]: Listening on LVM2 metadata daemon socket.
[   10.249167] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.304507] systemd[1]: Starting Set Up Additional Binary Formats...
[   10.305873] systemd[1]: Mounting POSIX Message Queue File System...
[   10.305983] systemd[1]: Reached target User and Group Name Lookups.
[   10.306381] systemd[1]: Created slice system-getty.slice.
[   10.306498] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.307902] systemd[1]: Mounting Debug File System...
[   10.308159] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.309790] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   10.309960] systemd[1]: Listening on udev Kernel Socket.
[   10.364026] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   10.370501] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 204 (systemd-binfmt)
[   10.412438] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[   10.414078] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.641439] lp: driver loaded but no devices found
[   10.697389] systemd[1]: Started Create Static Device Nodes in /dev.
[   10.708734] systemd[1]: Starting udev Kernel Device Manager...
[   10.733870] ppdev: user-space parallel port driver
[   10.767638] systemd[1]: Started Load Kernel Modules.
[   10.788778] systemd[1]: Starting Apply Kernel Variables...
[   10.878981] systemd[1]: Started Apply Kernel Variables.
[   10.879650] systemd[1]: Started Journal Service.
[   11.703806] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[   11.855212] systemd-journald[201]: Received request to flush runtime journal from PID 1
[   12.236759] ACPI: AC Adapter [AC0] (on-line)
[   12.440206] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[   12.440218] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.463894] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.591439] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.600968] input: PC Speaker as /devices/platform/pcspkr/input/input15
[   12.659859] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   12.780617] ACPI: Battery Slot [BAT0] (battery present)
[   12.816451] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.816459] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.816463] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   12.816466] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.816469] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.816474] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   12.816477] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   13.348491] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   13.351960] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   13.352126] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   13.352272] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   13.759324] iTCO_vendor_support: vendor-support=0
[   13.760776] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.760874] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[   13.761102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.799889] asus_wmi: Asus Management GUID not found
[   13.828969] SSE version of gcm_enc/dec engaged.
[   14.609298] media: Linux media interface: v0.10
[   14.698873] Linux video capture interface: v2.00
[   14.796984] usbcore: registered new interface driver r8152
[   14.884528] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd
[   15.016805] r8152 1-1.4:1.0 eth0: v1.08.2
[   15.056088] usbcore: registered new interface driver cdc_ether
[   15.293902] uvcvideo: Found UVC 1.00 device VGA Webcam (1e4e:0110)
[   15.434467] Adding 3998716k swap on /dev/sda5.  Priority:-1 extents:1 across:3998716k FS
[   15.442834] input: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input20
[   15.443152] usbcore: registered new interface driver uvcvideo
[   15.443155] USB Video Class driver (1.1.1)
[   15.795597] Bluetooth: Core ver 2.21
[   15.795635] NET: Registered protocol family 31
[   15.795638] Bluetooth: HCI device and connection manager initialized
[   15.795647] Bluetooth: HCI socket layer initialized
[   15.795653] Bluetooth: L2CAP socket layer initialized
[   15.796222] Bluetooth: SCO socket layer initialized
[   16.421513] usbcore: registered new interface driver btusb
[   16.423008] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   16.423015] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   16.437077] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[   16.438166] Bluetooth: hci0: rom_version status=0 version=1
[   16.713078] r8152 1-1.4:1.0 enx00e04c360069: renamed from eth0
[   17.360639] intel_rapl: Found RAPL domain package
[   17.360647] intel_rapl: Found RAPL domain core
[   18.454947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.454955] Bluetooth: BNEP filters: protocol multicast
[   18.454966] Bluetooth: BNEP socket layer initialized
[   21.454552] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[   21.504160] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[   23.137467] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[   39.664356] fuse init (API version 7.23)
[   44.110852] Bluetooth: RFCOMM TTY layer initialized
[   44.110873] Bluetooth: RFCOMM socket layer initialized
[   44.110889] Bluetooth: RFCOMM ver 1.11
[ 6386.855603] PM: Syncing filesystems ... done.
[ 6387.112886] PM: Preparing system for sleep (mem)
[ 6387.113329] (NULL device *): firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[ 6387.113357] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 6387.115691] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6387.116953] PM: Suspending system (mem)
[ 6387.116992] Suspending console(s) (use no_console_suspend to debug)
[ 6387.144804] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 6387.221679] sd 1:0:0:0: [sda] Stopping disk
[ 6387.740315] PM: suspend of devices complete after 599.775 msecs
[ 6387.756140] PM: late suspend of devices complete after 15.809 msecs
[ 6387.758489] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6387.771930] PM: noirq suspend of devices complete after 15.784 msecs
[ 6387.771981] ACPI: Preparing to enter system sleep state S3
[ 6387.772467] ACPI : EC: EC stopped
[ 6387.772468] PM: Saving platform NVS memory
[ 6387.772547] Disabling non-boot CPUs ...
[ 6387.774080] smpboot: CPU 1 is now offline
[ 6387.776107] smpboot: CPU 2 is now offline
[ 6387.778560] smpboot: CPU 3 is now offline
[ 6387.780607] ACPI: Low-level resume complete
[ 6387.780721] ACPI : EC: EC started
[ 6387.780722] PM: Restoring platform NVS memory
[ 6387.781362] Enabling non-boot CPUs ...
[ 6387.781486] x86: Booting SMP configuration:
[ 6387.781488] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6387.789310]  cache: parent cpu1 should not be sleeping
[ 6387.789969] CPU1 is up
[ 6387.790246] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 6387.798510]  cache: parent cpu2 should not be sleeping
[ 6387.799341] CPU2 is up
[ 6387.799468] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 6387.807414]  cache: parent cpu3 should not be sleeping
[ 6387.808117] CPU3 is up
[ 6387.809327] ACPI: Waking up from system sleep state S3
[ 6387.829954] acpi LNXPOWER:00: Turning OFF
[ 6387.833426] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6387.845681] PM: noirq resume of devices complete after 15.670 msecs
[ 6387.921917] PM: early resume of devices complete after 76.201 msecs
[ 6387.937473] sd 1:0:0:0: [sda] Starting disk
[ 6387.967817] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[ 6388.026404] rtc_cmos 00:00: System wakeup disabled by ACPI
[ 6388.072590] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 6388.072595] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 6388.194355] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[ 6388.257467] ata1: SATA link down (SStatus 4 SControl 300)
[ 6388.275468] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 6388.275474] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 6388.475543] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 6388.475546] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 6388.676060] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[ 6388.676071] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 6389.317641] PM: resume of devices complete after 1395.735 msecs
[ 6389.318293] PM: Finishing wakeup.
[ 6389.318297] Restarting tasks ... 
[ 6389.326112] usb 1-4: USB disconnect, device number 5
[ 6389.333412] done.
[ 6389.633412] usb 1-4: new high-speed USB device number 7 using xhci_hcd
[ 6389.767356] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[ 6389.767364] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6389.767368] usb 1-4: Product: 802.11n WLAN Adapter
[ 6389.767371] usb 1-4: Manufacturer: Realtek
[ 6389.767374] usb 1-4: SerialNumber: 00e04c000001
[ 6389.770871] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 6389.770878] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 6389.771769] Bluetooth: hci0: rom_version status=0 version=1
[ 6390.453335] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6390.518834] ata2.00: configured for UDMA/133
[ 6390.661865] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[ 6390.709714] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[ 6392.307681] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[ 6393.875972] usb 1-4: USB disconnect, device number 7
[ 6398.489221] usb 1-4: new high-speed USB device number 8 using xhci_hcd
[ 6398.617667] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[ 6398.617676] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6398.617679] usb 1-4: Product: 802.11n WLAN Adapter
[ 6398.617682] usb 1-4: Manufacturer: Realtek
[ 6398.617685] usb 1-4: SerialNumber: 00e04c000001
[ 6398.621181] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 6398.621190] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 6398.621891] Bluetooth: hci0: rom_version status=0 version=1
[ 7297.037842] PM: Syncing filesystems ... done.
[ 7297.478329] PM: Preparing system for sleep (mem)
[ 7297.478673] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7297.480618] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7297.482534] PM: Suspending system (mem)
[ 7297.482578] Suspending console(s) (use no_console_suspend to debug)
[ 7297.507870] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 7297.595291] sd 1:0:0:0: [sda] Stopping disk
[ 7297.720938] tpm_crb MSFT0101:00: A TPM error (256) occurred stopping the TPM
[ 7298.152104] PM: suspend of devices complete after 647.002 msecs
[ 7298.168903] PM: late suspend of devices complete after 16.778 msecs
[ 7298.171868] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 7298.184551] PM: noirq suspend of devices complete after 15.627 msecs
[ 7298.184691] ACPI: Preparing to enter system sleep state S3
[ 7298.186105] ACPI : EC: EC stopped
[ 7298.186109] PM: Saving platform NVS memory
[ 7298.186283] Disabling non-boot CPUs ...
[ 7298.188580] smpboot: CPU 1 is now offline
[ 7298.191258] smpboot: CPU 2 is now offline
[ 7298.193708] smpboot: CPU 3 is now offline
[ 7298.195242] ACPI: Low-level resume complete
[ 7298.195336] ACPI : EC: EC started
[ 7298.195337] PM: Restoring platform NVS memory
[ 7298.195953] Enabling non-boot CPUs ...
[ 7298.196076] x86: Booting SMP configuration:
[ 7298.196079] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7298.203917]  cache: parent cpu1 should not be sleeping
[ 7298.204436] CPU1 is up
[ 7298.204657] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 7298.212764]  cache: parent cpu2 should not be sleeping
[ 7298.213413] CPU2 is up
[ 7298.213542] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 7298.221466]  cache: parent cpu3 should not be sleeping
[ 7298.222139] CPU3 is up
[ 7298.223266] ACPI: Waking up from system sleep state S3
[ 7298.246673] acpi LNXPOWER:00: Turning OFF
[ 7298.249873] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 7298.262114] PM: noirq resume of devices complete after 15.379 msecs
[ 7298.338287] PM: early resume of devices complete after 76.129 msecs
[ 7298.353956] sd 1:0:0:0: [sda] Starting disk
[ 7298.384229] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[ 7298.443232] rtc_cmos 00:00: System wakeup disabled by ACPI
[ 7298.610702] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[ 7298.677880] ata1: SATA link down (SStatus 4 SControl 300)
[ 7299.734493] PM: resume of devices complete after 1396.080 msecs
[ 7300.890310] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7300.956756] ata2.00: configured for UDMA/133
[ 7301.284177] PM: Finishing wakeup.
[ 7301.284183] Restarting tasks ... 
[ 7301.289364] usb 1-4: USB disconnect, device number 8
[ 7301.301100] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input41
[ 7301.304692] done.
[ 7301.534174] usb 1-4: new high-speed USB device number 9 using xhci_hcd
[ 7301.662549] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[ 7301.662557] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7301.662560] usb 1-4: Product: 802.11n WLAN Adapter
[ 7301.662563] usb 1-4: Manufacturer: Realtek
[ 7301.662566] usb 1-4: SerialNumber: 00e04c000001
[ 7301.666841] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 7301.666848] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 7301.667461] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[ 7301.668842] Bluetooth: hci0: rom_version status=0 version=1
[ 7301.891794] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x495f00)
[ 7301.905138] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
[ 7301.918523] psmouse serio4: elantech: Elan sample query result 01, 78, 86
[ 7301.990927] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input43
[ 7301.995722] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[ 7302.046250] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[ 7303.739681] usb 1-4: USB disconnect, device number 9
[ 7303.813067] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[ 7308.346693] usb 1-4: new high-speed USB device number 10 using xhci_hcd
[ 7308.475643] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[ 7308.475654] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7308.475658] usb 1-4: Product: 802.11n WLAN Adapter
[ 7308.475662] usb 1-4: Manufacturer: Realtek
[ 7308.475666] usb 1-4: SerialNumber: 00e04c000001
[ 7308.481930] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 7308.481940] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 7308.482040] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[ 7308.482941] Bluetooth: hci0: rom_version status=0 version=1
[10392.855641] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[14955.893552] perf interrupt took too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[15074.762782] PM: Syncing filesystems ... done.
[15075.080640] PM: Preparing system for sleep (mem)
[15075.081069] (NULL device *): firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[15075.081097] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15075.083059] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15075.084266] PM: Suspending system (mem)
[15075.084302] Suspending console(s) (use no_console_suspend to debug)
[15075.111056] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[15075.143351] tpm_crb MSFT0101:00: A TPM error (256) occurred stopping the TPM
[15075.206436] sd 1:0:0:0: [sda] Stopping disk
[15075.740089] PM: suspend of devices complete after 632.871 msecs
[15075.759873] PM: late suspend of devices complete after 19.767 msecs
[15075.762974] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15075.775452] PM: noirq suspend of devices complete after 15.567 msecs
[15075.775565] ACPI: Preparing to enter system sleep state S3
[15075.776659] ACPI : EC: EC stopped
[15075.776663] PM: Saving platform NVS memory
[15075.776802] Disabling non-boot CPUs ...
[15075.778911] smpboot: CPU 1 is now offline
[15075.782100] smpboot: CPU 2 is now offline
[15075.784772] smpboot: CPU 3 is now offline
[15075.786387] ACPI: Low-level resume complete
[15075.786505] ACPI : EC: EC started
[15075.786506] PM: Restoring platform NVS memory
[15075.787115] Enabling non-boot CPUs ...
[15075.787243] x86: Booting SMP configuration:
[15075.787246] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15075.795077]  cache: parent cpu1 should not be sleeping
[15075.795763] CPU1 is up
[15075.796045] smpboot: Booting Node 0 Processor 2 APIC 0x4
[15075.804290]  cache: parent cpu2 should not be sleeping
[15075.804997] CPU2 is up
[15075.805114] smpboot: Booting Node 0 Processor 3 APIC 0x6
[15075.813058]  cache: parent cpu3 should not be sleeping
[15075.813717] CPU3 is up
[15075.814839] ACPI: Waking up from system sleep state S3
[15075.833404] acpi LNXPOWER:00: Turning OFF
[15075.836801] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15075.849054] PM: noirq resume of devices complete after 15.589 msecs
[15075.925691] PM: early resume of devices complete after 76.597 msecs
[15075.940845] sd 1:0:0:0: [sda] Starting disk
[15075.971046] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[15076.029627] rtc_cmos 00:00: System wakeup disabled by ACPI
[15076.072847] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15076.072850] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15076.201680] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[15076.270588] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15076.270590] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15076.288741] ata1: SATA link down (SStatus 4 SControl 300)
[15076.471055] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15076.471068] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15076.671561] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15076.671571] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15076.871478] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15076.871491] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15077.071395] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[15077.071407] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[15077.325338] PM: resume of devices complete after 1399.641 msecs
[15077.326604] PM: Finishing wakeup.
[15077.326616] Restarting tasks ... 
[15077.330121] usb 1-4: USB disconnect, device number 10
[15077.374714] done.
[15077.572728] usb 1-4: new high-speed USB device number 11 using xhci_hcd
[15077.702259] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[15077.702266] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15077.702270] usb 1-4: Product: 802.11n WLAN Adapter
[15077.702273] usb 1-4: Manufacturer: Realtek
[15077.702276] usb 1-4: SerialNumber: 00e04c000001
[15077.706448] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[15077.706458] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[15077.707368] Bluetooth: hci0: rom_version status=0 version=1
[15078.469028] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15078.535020] ata2.00: configured for UDMA/133
[15078.677267] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[15078.725059] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[15080.376290] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[15081.285302] usb 1-4: USB disconnect, device number 11
[15085.900592] usb 1-4: new high-speed USB device number 12 using xhci_hcd
[15086.029191] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[15086.029200] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15086.029203] usb 1-4: Product: 802.11n WLAN Adapter
[15086.029206] usb 1-4: Manufacturer: Realtek
[15086.029209] usb 1-4: SerialNumber: 00e04c000001
[15086.038408] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[15086.038417] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[15086.039390] Bluetooth: hci0: rom_version status=0 version=1
[19628.009552] PM: Syncing filesystems ... done.
[19628.357102] PM: Preparing system for sleep (mem)
[19628.357436] Freezing user space processes ... (elapsed 0.002 seconds) done.
[19628.359840] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[19628.361080] PM: Suspending system (mem)
[19628.361118] Suspending console(s) (use no_console_suspend to debug)
[19628.389015] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[19628.421286] tpm_crb MSFT0101:00: A TPM error (256) occurred stopping the TPM
[19628.529359] sd 1:0:0:0: [sda] Stopping disk
[19629.041800] PM: suspend of devices complete after 656.629 msecs
[19629.061622] PM: late suspend of devices complete after 19.808 msecs
[19629.063935] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[19629.077261] PM: noirq suspend of devices complete after 15.630 msecs
[19629.077325] ACPI: Preparing to enter system sleep state S3
[19629.077994] ACPI : EC: EC stopped
[19629.077996] PM: Saving platform NVS memory
[19629.078084] Disabling non-boot CPUs ...
[19629.079742] smpboot: CPU 1 is now offline
[19629.082504] smpboot: CPU 2 is now offline
[19629.084768] smpboot: CPU 3 is now offline
[19629.086089] ACPI: Low-level resume complete
[19629.086204] ACPI : EC: EC started
[19629.086205] PM: Restoring platform NVS memory
[19629.086832] Enabling non-boot CPUs ...
[19629.086960] x86: Booting SMP configuration:
[19629.086963] smpboot: Booting Node 0 Processor 1 APIC 0x2
[19629.094798]  cache: parent cpu1 should not be sleeping
[19629.095225] CPU1 is up
[19629.095364] smpboot: Booting Node 0 Processor 2 APIC 0x4
[19629.103288]  cache: parent cpu2 should not be sleeping
[19629.103745] CPU2 is up
[19629.103869] smpboot: Booting Node 0 Processor 3 APIC 0x6
[19629.111763]  cache: parent cpu3 should not be sleeping
[19629.112056] CPU3 is up
[19629.112612] ACPI: Waking up from system sleep state S3
[19629.131194] acpi LNXPOWER:00: Turning OFF
[19629.134612] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[19629.146919] PM: noirq resume of devices complete after 15.662 msecs
[19629.223027] PM: early resume of devices complete after 76.070 msecs
[19629.227574] sd 1:0:0:0: [sda] Starting disk
[19629.268929] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[19629.327754] rtc_cmos 00:00: System wakeup disabled by ACPI
[19629.373519] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19629.373527] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19629.503274] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[19629.538842] ata1: SATA link down (SStatus 4 SControl 300)
[19629.572434] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19629.572438] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19629.777209] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19629.777222] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19629.976771] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19629.976784] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19630.176873] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19630.176886] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19630.377151] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[19630.377164] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[19630.743195] usb 1-2: reset low-speed USB device number 3 using xhci_hcd
[19631.021238] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[19631.025094] PM: resume of devices complete after 1802.052 msecs
[19631.025767] PM: Finishing wakeup.
[19631.025771] Restarting tasks ... done.
[19631.048219] usb 1-4: USB disconnect, device number 12
[19631.290565] usb 1-4: new high-speed USB device number 13 using xhci_hcd
[19631.423717] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[19631.423726] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19631.423731] usb 1-4: Product: 802.11n WLAN Adapter
[19631.423735] usb 1-4: Manufacturer: Realtek
[19631.423738] usb 1-4: SerialNumber: 00e04c000001
[19631.427664] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[19631.427675] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[19631.427837] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[19631.429707] Bluetooth: hci0: rom_version status=0 version=1
[19631.790608] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[19631.856635] ata2.00: configured for UDMA/133
[19632.184430] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[19632.230767] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[19633.899784] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[19635.063608] usb 1-4: USB disconnect, device number 13
[19639.674935] usb 1-4: new high-speed USB device number 14 using xhci_hcd
[19639.803605] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[19639.803614] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19639.803620] usb 1-4: Product: 802.11n WLAN Adapter
[19639.803624] usb 1-4: Manufacturer: Realtek
[19639.803627] usb 1-4: SerialNumber: 00e04c000001
[19639.808573] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[19639.808594] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[19639.808692] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[19639.809903] Bluetooth: hci0: rom_version status=0 version=1
[22801.180865] PM: Syncing filesystems ... done.
[22801.445567] PM: Preparing system for sleep (mem)
[22801.446012] (NULL device *): firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[22801.446182] Freezing user space processes ... (elapsed 0.002 seconds) done.
[22801.448746] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[22801.450139] PM: Suspending system (mem)
[22801.450177] Suspending console(s) (use no_console_suspend to debug)
[22801.476294] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[22801.500091] tpm_crb MSFT0101:00: A TPM error (256) occurred stopping the TPM
[22801.558068] sd 1:0:0:0: [sda] Stopping disk
[22802.068886] PM: suspend of devices complete after 596.849 msecs
[22802.088775] PM: late suspend of devices complete after 19.867 msecs
[22802.091284] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[22802.104061] PM: noirq suspend of devices complete after 15.277 msecs
[22802.104116] ACPI: Preparing to enter system sleep state S3
[22802.104660] ACPI : EC: EC stopped
[22802.104661] PM: Saving platform NVS memory
[22802.104746] Disabling non-boot CPUs ...
[22802.106303] smpboot: CPU 1 is now offline
[22802.108708] smpboot: CPU 2 is now offline
[22802.111381] smpboot: CPU 3 is now offline
[22802.113573] ACPI: Low-level resume complete
[22802.113697] ACPI : EC: EC started
[22802.113698] PM: Restoring platform NVS memory
[22802.114349] Enabling non-boot CPUs ...
[22802.114478] x86: Booting SMP configuration:
[22802.114480] smpboot: Booting Node 0 Processor 1 APIC 0x2
[22802.122318]  cache: parent cpu1 should not be sleeping
[22802.122986] CPU1 is up
[22802.123268] smpboot: Booting Node 0 Processor 2 APIC 0x4
[22802.131533]  cache: parent cpu2 should not be sleeping
[22802.132434] CPU2 is up
[22802.132573] smpboot: Booting Node 0 Processor 3 APIC 0x6
[22802.140514]  cache: parent cpu3 should not be sleeping
[22802.141123] CPU3 is up
[22802.142298] ACPI: Waking up from system sleep state S3
[22802.162119] acpi LNXPOWER:00: Turning OFF
[22802.165597] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[22802.177862] PM: noirq resume of devices complete after 15.683 msecs
[22802.254081] PM: early resume of devices complete after 76.181 msecs
[22802.269668] sd 1:0:0:0: [sda] Starting disk
[22802.299964] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[22802.358627] rtc_cmos 00:00: System wakeup disabled by ACPI
[22802.404453] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22802.404466] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22802.530185] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[22802.593535] ata1: SATA link down (SStatus 4 SControl 300)
[22802.603412] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22802.603415] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22802.807954] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22802.807967] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22803.007819] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22803.007825] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22803.207951] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22803.207964] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22803.408121] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[22803.408134] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[22803.785929] usb 1-2: reset low-speed USB device number 3 using xhci_hcd
[22804.063661] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[22804.068052] PM: resume of devices complete after 1813.977 msecs
[22804.068697] PM: Finishing wakeup.
[22804.068701] Restarting tasks ... done.
[22804.081405] usb 1-4: USB disconnect, device number 14
[22804.325514] usb 1-4: new high-speed USB device number 15 using xhci_hcd
[22804.457932] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[22804.457939] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22804.457943] usb 1-4: Product: 802.11n WLAN Adapter
[22804.457946] usb 1-4: Manufacturer: Realtek
[22804.457949] usb 1-4: SerialNumber: 00e04c000001
[22804.465068] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[22804.465079] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[22804.466483] Bluetooth: hci0: rom_version status=0 version=1
[22804.821500] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[22804.886993] ata2.00: configured for UDMA/133
[22805.023926] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[22805.069619] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[22806.736599] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[22808.031166] usb 1-4: USB disconnect, device number 15
[22812.641701] usb 1-4: new high-speed USB device number 16 using xhci_hcd
[22812.770350] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[22812.770363] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22812.770369] usb 1-4: Product: 802.11n WLAN Adapter
[22812.770374] usb 1-4: Manufacturer: Realtek
[22812.770379] usb 1-4: SerialNumber: 00e04c000001
[22812.774552] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[22812.774562] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[22812.775835] Bluetooth: hci0: rom_version status=0 version=1
[23379.011901] PM: Syncing filesystems ... done.
[23379.464089] PM: Preparing system for sleep (mem)
[23379.464411] Freezing user space processes ... (elapsed 0.002 seconds) done.
[23379.466687] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[23379.467788] PM: Suspending system (mem)
[23379.467824] Suspending console(s) (use no_console_suspend to debug)
[23379.495988] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[23379.515819] tpm_crb MSFT0101:00: A TPM error (256) occurred stopping the TPM
[23379.601470] sd 1:0:0:0: [sda] Stopping disk
[23380.128197] PM: suspend of devices complete after 636.657 msecs
[23380.144112] PM: late suspend of devices complete after 15.892 msecs
[23380.146533] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[23380.159715] PM: noirq suspend of devices complete after 15.591 msecs
[23380.159765] ACPI: Preparing to enter system sleep state S3
[23380.160435] ACPI : EC: EC stopped
[23380.160437] PM: Saving platform NVS memory
[23380.160530] Disabling non-boot CPUs ...
[23380.162151] smpboot: CPU 1 is now offline
[23380.165028] smpboot: CPU 2 is now offline
[23380.168571] smpboot: CPU 3 is now offline
[23380.170141] ACPI: Low-level resume complete
[23380.170234] ACPI : EC: EC started
[23380.170235] PM: Restoring platform NVS memory
[23380.170845] Enabling non-boot CPUs ...
[23380.170973] x86: Booting SMP configuration:
[23380.170976] smpboot: Booting Node 0 Processor 1 APIC 0x2
[23380.178823]  cache: parent cpu1 should not be sleeping
[23380.179203] CPU1 is up
[23380.179322] smpboot: Booting Node 0 Processor 2 APIC 0x4
[23380.187091]  cache: parent cpu2 should not be sleeping
[23380.187341] CPU2 is up
[23380.187459] smpboot: Booting Node 0 Processor 3 APIC 0x6
[23380.195389]  cache: parent cpu3 should not be sleeping
[23380.196014] CPU3 is up
[23380.197184] ACPI: Waking up from system sleep state S3
[23380.221780] acpi LNXPOWER:00: Turning OFF
[23380.225043] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[23380.237339] PM: noirq resume of devices complete after 15.500 msecs
[23380.323539] PM: early resume of devices complete after 86.170 msecs
[23380.326949] sd 1:0:0:0: [sda] Starting disk
[23380.367471] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[23380.426148] rtc_cmos 00:00: System wakeup disabled by ACPI
[23380.472194] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23380.472207] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23380.593963] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[23380.649318] ata1: SATA link down (SStatus 4 SControl 300)
[23380.670901] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23380.670911] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23380.871581] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23380.871596] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23381.075223] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23381.075234] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23381.275499] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23381.275506] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23381.475594] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[23381.475606] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[23381.721286] PM: resume of devices complete after 1397.871 msecs
[23381.722082] PM: Finishing wakeup.
[23381.722092] Restarting tasks ... done.
[23381.735559] usb 1-4: USB disconnect, device number 16
[23381.992817] usb 1-4: new high-speed USB device number 17 using xhci_hcd
[23382.125283] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[23382.125291] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[23382.125295] usb 1-4: Product: 802.11n WLAN Adapter
[23382.125298] usb 1-4: Manufacturer: Realtek
[23382.125301] usb 1-4: SerialNumber: 00e04c000001
[23382.133500] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[23382.133509] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[23382.133600] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[23382.135034] Bluetooth: hci0: rom_version status=0 version=1
[23382.880748] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[23382.947661] ata2.00: configured for UDMA/133
[23383.084449] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[23383.136853] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360069: link is not ready
[23384.789427] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360069: link becomes ready
[23386.518431] usb 1-4: USB disconnect, device number 17
[23391.135978] usb 1-4: new high-speed USB device number 18 using xhci_hcd
[23391.264436] usb 1-4: New USB device found, idVendor=0bda, idProduct=b720
[23391.264444] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[23391.264448] usb 1-4: Product: 802.11n WLAN Adapter
[23391.264451] usb 1-4: Manufacturer: Realtek
[23391.264454] usb 1-4: SerialNumber: 00e04c000001
[23391.273076] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[23391.273083] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[23391.273177] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[23391.274236] Bluetooth: hci0: rom_version status=0 version=1
[23483.909424] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
