[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-3-deepin-amd64 (yangbo@deepin.com) (gcc version 5.4.1 20160803 (Debian 5.4.1-1) ) #1 SMP Deepin 4.4.30-2 (2016-12-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-3-deepin-amd64 root=UUID=940bb0f1-b91d-4dc4-90ae-230d81f2b7d1 ro splash quiet
[    0.000000] tseg: 0000000000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e9eb0-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffb7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffbc000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron 410/0X37H9, BIOS A04 12/16/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0000FFFA0000 mask FFFFFFFE0000 uncachable
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[    0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3343a000-0x35a14fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8E10 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000CFF70000 000040 (v01 DELL   ECS      20101216 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF70200 000084 (v01 DELL   ECS      20101216 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF70640 0086B1 (v01 1AAAA  1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CFF7E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF70390 00006C (v01 DELL   ECS      20101216 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF70400 00003C (v01 DELL   OEMMCFG  20101216 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000CFF70440 000176 (v01 DELL   ECS      20101216 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF7E040 000082 (v01 DELL   ECS      20101216 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF7B500 000038 (v01 DELL   OEMHPET  20101216 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CFF7B540 000386 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fffa000-0x12fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000098fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff6ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[    0.000000] On node 0 totalpages: 1048328
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3992 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847728 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000ea000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff7e000-0xcffb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffb8000-0xcffbbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffbc000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88012fc00000 s92952 r8192 d29928 u524288
[    0.000000] pcpu-alloc: s92952 r8192 d29928 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031925
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-3-deepin-amd64 root=UUID=940bb0f1-b91d-4dc4-90ae-230d81f2b7d1 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x437c000000-0x437dffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3943048K/4193312K available (5729K kernel code, 1070K rwdata, 2876K rodata, 1308K init, 828K bss, 250264K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.058 MHz processor
[    0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.11 BogoMIPS (lpj=9176232)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000051] ACPI: Core revision 20150930
[    0.005804] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.005837] Security Framework initialized
[    0.005840] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005848] AppArmor: AppArmor disabled by boot time parameter
[    0.006179] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007553] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008198] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008205] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008488] Initializing cgroup subsys io
[    0.008493] Initializing cgroup subsys memory
[    0.008596] Disabling memory control group subsystem
[    0.008597] Initializing cgroup subsys devices
[    0.008601] Initializing cgroup subsys freezer
[    0.008605] Initializing cgroup subsys net_cls
[    0.008608] Initializing cgroup subsys perf_event
[    0.008612] Initializing cgroup subsys net_prio
[    0.008616] Initializing cgroup subsys pids
[    0.008638] CPU: Physical Processor ID: 0
[    0.008639] CPU: Processor Core ID: 0
[    0.008641] mce: CPU supports 6 MCE banks
[    0.008648] LVT offset 0 assigned for vector 0xf9
[    0.008652] process: using AMD E400 aware idle routine
[    0.008655] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.008656] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.008902] Freeing SMP alternatives memory: 24K (ffffffff81c54000 - ffffffff81c5a000)
[    0.011823] ftrace: allocating 23740 entries in 93 pages
[    0.020301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.164038] smpboot: CPU0: AMD Athlon(tm) II P360 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[    0.164075] Performance Events: AMD PMU driver.
[    0.164079] ... version:                0
[    0.164081] ... bit width:              48
[    0.164082] ... generic registers:      4
[    0.164083] ... value mask:             0000ffffffffffff
[    0.164085] ... max period:             00007fffffffffff
[    0.164086] ... fixed-purpose events:   0
[    0.164087] ... event mask:             000000000000000f
[    0.164610] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.164716] x86: Booting SMP configuration:
[    0.164718] .... node  #0, CPUs:      #1
[    0.166839] x86: Booted up 1 node, 2 CPUs
[    0.166842] smpboot: Total of 2 processors activated (9176.23 BogoMIPS)
[    0.167264] process: System has AMD C1E enabled
[    0.167277] process: Switch to broadcast mode on CPU0
[    0.167295] process: Switch to broadcast mode on CPU1
[    0.167348] devtmpfs: initialized
[    0.171549] PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffb7fff] (237568 bytes)
[    0.171640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.171734] pinctrl core: initialized pinctrl subsystem
[    0.171911] NET: Registered protocol family 16
[    0.183326] cpuidle: using governor ladder
[    0.195326] cpuidle: using governor menu
[    0.195340] node 0 link 0: io port [1000, ffffff]
[    0.195344] TOM: 00000000d0000000 aka 3328M
[    0.195346] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.195349] node 0 link 0: mmio [d0000000, dfffffff]
[    0.195355] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.195357] node 0 link 0: mmio [f0000000, febfffff]
[    0.195359] node 0 link 0: mmio [fec00000, fffeffff]
[    0.195360] node 0 link 0: mmio [ffff0000, ffffffff]
[    0.195362] TOM2: 0000000130000000 aka 4864M
[    0.195364] bus: [bus 00-1f] on node 0 link 0
[    0.195366] bus: 00 [io  0x0000-0xffff]
[    0.195367] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.195369] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.195370] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.195459] ACPI: bus type PCI registered
[    0.195461] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.195569] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.195572] PCI: not using MMCONFIG
[    0.195574] PCI: Using configuration type 1 for base access
[    0.195575] PCI: Using configuration type 1 for extended access
[    0.195784] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.195785] mtrr: probably your BIOS does not setup all CPUs.
[    0.195786] mtrr: corrected configuration.
[    0.207848] ACPI: Added _OSI(Module Device)
[    0.207853] ACPI: Added _OSI(Processor Device)
[    0.207854] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.207856] ACPI: Added _OSI(Processor Aggregator Device)
[    0.209876] ACPI: Executed 3 blocks of module-level executable AML code
[    0.213290] ACPI: Interpreter enabled
[    0.213311] ACPI: (supports S0 S3 S4 S5)
[    0.213313] ACPI: Using IOAPIC for interrupt routing
[    0.213354] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.214504] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.214523] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.222653] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.222662] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.222949] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.223275] PCI host bridge to bus 0000:00
[    0.223279] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.223282] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.223287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.223289] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.223291] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[    0.223307] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.223309] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.223320] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.223453] pci 0000:00:03.0: [1022:960b] type 01 class 0x060400
[    0.223492] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.223829] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.223878] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[    0.223916] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.224239] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.224283] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[    0.224321] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.224374] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.224430] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.224455] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.224465] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.224474] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.224484] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.224493] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.224502] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff]
[    0.224617] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.224632] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff]
[    0.224735] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.224786] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.224811] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff]
[    0.224878] pci 0000:00:12.2: supports D1 D2
[    0.224880] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.224934] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.224983] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.224998] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff]
[    0.225100] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.225149] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.225174] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff]
[    0.225241] pci 0000:00:13.2: supports D1 D2
[    0.225243] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.225296] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.225347] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.225497] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.225524] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f8000-0xfe6fbfff 64bit]
[    0.225581] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.225633] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.225682] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.225830] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.225913] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.225957] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.225973] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff]
[    0.226074] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.226124] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.226139] pci 0000:00:16.0: reg 0x10: [mem 0xfe6f7000-0xfe6f7fff]
[    0.226240] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.226290] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.226314] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff]
[    0.226382] pci 0000:00:16.2: supports D1 D2
[    0.226383] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.226437] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.226486] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.226575] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.226659] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.226742] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.226827] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.226977] pci 0000:01:00.0: [1002:68e0] type 00 class 0x030000
[    0.227001] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.227011] pci 0000:01:00.0: reg 0x18: [mem 0xfe7e0000-0xfe7fffff 64bit]
[    0.227019] pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.227032] pci 0000:01:00.0: reg 0x30: [mem 0xfe7c0000-0xfe7dffff pref]
[    0.227065] pci 0000:01:00.0: supports D1 D2
[    0.227127] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.227151] pci 0000:01:00.1: reg 0x10: [mem 0xfe7bc000-0xfe7bffff 64bit]
[    0.227208] pci 0000:01:00.1: supports D1 D2
[    0.231344] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.231351] pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
[    0.231355] pci 0000:00:03.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.231359] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.231457] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[    0.231495] pci 0000:02:00.0: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.231598] pci 0000:02:00.0: supports D1 D2
[    0.231600] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.239346] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.239355] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.239437] pci 0000:03:00.0: [1969:1073] type 00 class 0x020000
[    0.239478] pci 0000:03:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.239489] pci 0000:03:00.0: reg 0x18: [io  0xe800-0xe87f]
[    0.239579] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.247348] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.247355] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.247358] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.247469] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.247480] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.247482] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.247484] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.247487] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.247489] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[    0.247491] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.248001] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15)
[    0.248078] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
[    0.248152] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
[    0.248225] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
[    0.248285] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.248332] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.248379] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.248427] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.248682] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.248685] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.248687] vgaarb: loaded
[    0.248689] vgaarb: bridge control possible 0000:01:00.0
[    0.248827] PCI: Using ACPI for IRQ routing
[    0.256770] PCI: pci_cache_line_size set to 64 bytes
[    0.256826] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[    0.256828] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff]
[    0.256997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.257001] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.259057] clocksource: Switched to clocksource hpet
[    0.266534] pnp: PnP ACPI init
[    0.266736] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.266825] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.266985] system 00:02: [io  0x0e00-0x0e0f] has been reserved
[    0.266988] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[    0.266991] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.266994] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267127] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.267130] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.267133] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267329] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.267332] system 00:04: [io  0x040b] has been reserved
[    0.267334] system 00:04: [io  0x04d6] has been reserved
[    0.267337] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.267339] system 00:04: [io  0x0c14] has been reserved
[    0.267341] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.267344] system 00:04: [io  0x0c52] has been reserved
[    0.267346] system 00:04: [io  0x0c6c] has been reserved
[    0.267348] system 00:04: [io  0x0c6f] has been reserved
[    0.267351] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.267353] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.267355] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.267358] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.267360] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.267362] system 00:04: [io  0x0800-0x089f] could not be reserved
[    0.267365] system 00:04: [io  0x0b00-0x0b1f] has been reserved
[    0.267367] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.267369] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.267372] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.267374] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.267377] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.267379] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.267382] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.267385] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267450] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.267453] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267702] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.267705] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.267707] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.267710] system 00:06: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.267712] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.267715] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.267820] pnp: PnP ACPI: found 7 devices
[    0.275152] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.275188] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.275192] pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
[    0.275196] pci 0000:00:03.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.275199] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.275203] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.275206] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.275211] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.275213] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.275217] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.275222] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.275235] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.275237] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.275239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.275241] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.275243] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.275245] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.275247] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.275249] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.275252] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.275254] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.275256] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.275258] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.275261] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.275263] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.275265] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.275267] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.275269] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.275271] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.275339] NET: Registered protocol family 2
[    0.275546] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.275650] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.275799] TCP: Hash tables configured (established 32768 bind 32768)
[    0.275855] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.275887] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.276003] NET: Registered protocol family 1
[    1.063750] pci 0000:01:00.0: Video device with shadowed ROM
[    1.063763] PCI: CLS 64 bytes, default 64
[    1.063833] Unpacking initramfs...
[    1.748294] Freeing initrd memory: 38764K (ffff88003343a000 - ffff880035a15000)
[    1.748576] PCI-DMA: Disabling AGP.
[    1.748671] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.748672] PCI-DMA: using GART IOMMU.
[    1.748675] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.751917] LVT offset 1 assigned for vector 0x400
[    1.751929] IBS: LVT offset 1 assigned
[    1.751952] perf: AMD IBS detected (0x0000001f)
[    1.752363] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.752420] audit: initializing netlink subsys (disabled)
[    1.752443] audit: type=2000 audit(1482887235.644:1): initialized
[    1.752943] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.752974] zbud: loaded
[    1.753182] VFS: Disk quotas dquot_6.6.0
[    1.753214] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.753972] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.754016] io scheduler noop registered
[    1.754020] io scheduler deadline registered
[    1.754042] io scheduler cfq registered (default)
[    1.754687] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[    1.754690] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.754692] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.754695] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[    1.754711] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[    1.754713] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.754716] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[    1.754731] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[    1.754733] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.754736] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[    1.754743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.754751] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.754823] GHES: HEST is not enabled!
[    1.754980] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.755687] Linux agpgart interface v0.103
[    1.755733] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.755735] AMD IOMMUv2 functionality not available on this system
[    1.755954] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.756346] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.756355] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.756547] mousedev: PS/2 mouse device common for all mice
[    1.756597] rtc_cmos 00:01: RTC can wake from S4
[    1.756751] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.756776] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.756791] ledtrig-cpu: registered to indicate activity on CPUs
[    1.757152] NET: Registered protocol family 10
[    1.757390] mip6: Mobile IPv6
[    1.757402] NET: Registered protocol family 17
[    1.757409] mpls_gso: MPLS GSO support
[    1.757652] microcode: CPU0: patch_level=0x010000c8
[    1.757672] microcode: CPU1: patch_level=0x010000c8
[    1.757747] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.757962] registered taskstats version 1
[    1.757997] zswap: loaded using pool lzo/zbud
[    1.759029] rtc_cmos 00:01: setting system clock to 2016-12-28 01:07:16 UTC (1482887236)
[    1.759093] PM: Hibernation image not present or could not be loaded.
[    1.760616] Freeing unused kernel memory: 1308K (ffffffff81b0d000 - ffffffff81c54000)
[    1.760620] Write protecting the kernel read-only data: 10240k
[    1.760981] Freeing unused kernel memory: 404K (ffff88000159b000 - ffff880001600000)
[    1.764632] Freeing unused kernel memory: 1220K (ffff8800018cf000 - ffff880001a00000)
[    1.773982] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.793534] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.793623] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.793637] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.793652] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794575] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794646] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794811] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794873] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794936] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.794996] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    1.839221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.839228] ACPI: Power Button [PWRB]
[    1.839303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.839305] ACPI: Power Button [PWRF]
[    1.854396] SCSI subsystem initialized
[    1.860734] libata version 3.00 loaded.
[    1.861554] ahci 0000:00:11.0: version 3.0
[    1.861823] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.861828] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    1.867176] scsi host0: ahci
[    1.873462] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.875008] scsi host1: ahci
[    1.882508] scsi host2: ahci
[    1.882665] scsi host3: ahci
[    1.882756] scsi host4: ahci
[    1.882843] scsi host5: ahci
[    1.882900] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19
[    1.882903] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19
[    1.882906] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19
[    1.882908] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19
[    1.882911] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19
[    1.882914] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19
[    2.002779] ACPI: bus type USB registered
[    2.002813] usbcore: registered new interface driver usbfs
[    2.002826] usbcore: registered new interface driver hub
[    2.002863] usbcore: registered new device driver usb
[    2.003450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.003674] ehci-pci: EHCI PCI platform driver
[    2.003891] QUIRK: Enable AMD PLL fix
[    2.003900] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.003924] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.003934] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.003941] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.003952] ehci-pci 0000:00:12.2: debug port 3
[    2.003998] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
[    2.015254] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.015385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.015388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.015390] usb usb1: Product: EHCI Host Controller
[    2.015392] usb usb1: Manufacturer: Linux 4.4.0-3-deepin-amd64 ehci_hcd
[    2.015394] usb usb1: SerialNumber: 0000:00:12.2
[    2.015576] hub 1-0:1.0: USB hub found
[    2.015584] hub 1-0:1.0: 5 ports detected
[    2.016073] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.016080] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.016085] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.016095] ehci-pci 0000:00:13.2: debug port 2
[    2.016131] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400
[    2.027475] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.027561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.027564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.027566] usb usb2: Product: EHCI Host Controller
[    2.027568] usb usb2: Manufacturer: Linux 4.4.0-3-deepin-amd64 ehci_hcd
[    2.027570] usb usb2: SerialNumber: 0000:00:13.2
[    2.027695] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[    2.027762] hub 2-0:1.0: USB hub found
[    2.027772] hub 2-0:1.0: 5 ports detected
[    2.028271] ehci-pci 0000:00:16.2: EHCI Host Controller
[    2.028279] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    2.028284] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.028294] ehci-pci 0000:00:16.2: debug port 1
[    2.028329] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000
[    2.039261] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.039357] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.039360] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.039362] usb usb3: Product: EHCI Host Controller
[    2.039364] usb usb3: Manufacturer: Linux 4.4.0-3-deepin-amd64 ehci_hcd
[    2.039366] usb usb3: SerialNumber: 0000:00:16.2
[    2.039541] hub 3-0:1.0: USB hub found
[    2.039549] hub 3-0:1.0: 4 ports detected
[    2.040246] ohci-pci: OHCI PCI platform driver
[    2.040455] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.040464] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    2.040503] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000
[    2.099351] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.099356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.099359] usb usb4: Product: OHCI PCI host controller
[    2.099361] usb usb4: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    2.099363] usb usb4: SerialNumber: 0000:00:12.0
[    2.099998] hub 4-0:1.0: USB hub found
[    2.100011] hub 4-0:1.0: 5 ports detected
[    2.100463] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.100470] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.100501] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000
[    2.159439] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.159444] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.159447] usb usb5: Product: OHCI PCI host controller
[    2.159449] usb usb5: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    2.159451] usb usb5: SerialNumber: 0000:00:13.0
[    2.160191] hub 5-0:1.0: USB hub found
[    2.160211] hub 5-0:1.0: 5 ports detected
[    2.160672] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.160680] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    2.160712] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000
[    2.191428] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[    2.199374] ata6: SATA link down (SStatus 0 SControl 300)
[    2.199416] ata5: SATA link down (SStatus 0 SControl 300)
[    2.199449] ata4: SATA link down (SStatus 0 SControl 300)
[    2.199478] ata3: SATA link down (SStatus 0 SControl 300)
[    2.219414] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.219418] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.219421] usb usb6: Product: OHCI PCI host controller
[    2.219423] usb usb6: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    2.219425] usb usb6: SerialNumber: 0000:00:14.5
[    2.219633] hub 6-0:1.0: USB hub found
[    2.219642] hub 6-0:1.0: 2 ports detected
[    2.219957] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    2.219964] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    2.219997] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f7000
[    2.279416] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.279421] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.279423] usb usb7: Product: OHCI PCI host controller
[    2.279424] usb usb7: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    2.279426] usb usb7: SerialNumber: 0000:00:16.0
[    2.279677] hub 7-0:1.0: USB hub found
[    2.279687] hub 7-0:1.0: 4 ports detected
[    2.331337] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.339335] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.375354] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.375387] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.378378] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD12, max UDMA/100
[    2.379684] ata2.00: configured for UDMA/100
[    2.381065] ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[    2.381069] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.386826] ata1.00: configured for UDMA/133
[    2.387129] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502HJ  0001 PQ: 0 ANSI: 5
[    2.392159] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DS-8A5SH XD12 PQ: 0 ANSI: 5
[    2.430778] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.430823] sd 0:0:0:0: [sda] Write Protect is off
[    2.430826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.430844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.445850] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.445856] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.446035] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.454347]  sda: sda1 sda2 sda3
[    2.454771] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.473176] usb 2-2: New USB device found, idVendor=05e3, idProduct=0610
[    2.473180] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.473183] usb 2-2: Product: USB2.0 Hub
[    2.473854] hub 2-2:1.0: USB hub found
[    2.474296] hub 2-2:1.0: 4 ports detected
[    2.720161] usb 1-5: New USB device found, idVendor=0bda, idProduct=0138
[    2.720166] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.720169] usb 1-5: Product: USB2.0-CRW
[    2.720171] usb 1-5: Manufacturer: Generic
[    2.720173] usb 1-5: SerialNumber: 20090516388200000
[    2.730348] usbcore: registered new interface driver usb-storage
[    2.731128] usbcore: registered new interface driver uas
[    2.737280] ums-realtek 1-5:1.0: USB Mass Storage device detected
[    2.751331] tsc: Refined TSC clocksource calibration: 2294.254 MHz
[    2.751336] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21120101e4c, max_idle_ns: 440795227753 ns
[    2.754174] usb 1-5: USB disconnect, device number 2
[    2.761856] scsi host6: usb-storage 1-5:1.0
[    2.761980] usbcore: registered new interface driver ums-realtek
[    2.811346] usb 2-2.3: new full-speed USB device number 4 using ehci-pci
[    2.851349] usb 5-3: new full-speed USB device number 2 using ohci-pci
[    2.866603] md: linear personality registered for level -1
[    2.871413] md: multipath personality registered for level -4
[    2.873574] md: raid0 personality registered for level 0
[    2.877641] md: raid1 personality registered for level 1
[    2.907239] usb 2-2.3: New USB device found, idVendor=09da, idProduct=1e7e
[    2.907244] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.907247] usb 2-2.3: Product: USB Device
[    2.907249] usb 2-2.3: Manufacturer: COMPANY
[    2.922106] hidraw: raw HID events driver (C) Jiri Kosina
[    2.928288] usbcore: registered new interface driver usbhid
[    2.928292] usbhid: USB HID core driver
[    2.935646] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2.3/2-2.3:1.0/0003:09DA:1E7E.0001/input/input5
[    2.971326] raid6: sse2x1   gen()  2783 MB/s
[    2.992023] hid-generic 0003:09DA:1E7E.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:13.2-2.3/input0
[    2.992214] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2.3/2-2.3:1.1/0003:09DA:1E7E.0002/input/input6
[    2.992290] hid-generic 0003:09DA:1E7E.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device] on usb-0000:00:13.2-2.3/input1
[    2.993786] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2.3/2-2.3:1.2/0003:09DA:1E7E.0003/input/input7
[    3.032399] usb 5-3: New USB device found, idVendor=24ae, idProduct=4005
[    3.032404] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.032406] usb 5-3: Product: Rapoo Gaming Keyboard
[    3.032408] usb 5-3: Manufacturer: Rapoo
[    3.039308] raid6: sse2x1   xor()  2615 MB/s
[    3.039760] input: Rapoo Rapoo Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:24AE:4005.0004/input/input8
[    3.047494] hid-generic 0003:09DA:1E7E.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:13.2-2.3/input2
[    3.103849] hid-generic 0003:24AE:4005.0004: input,hidraw3: USB HID v1.10 Keyboard [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:13.0-3/input0
[    3.107330] raid6: sse2x2   gen()  3750 MB/s
[    3.117555] input: Rapoo Rapoo Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/0003:24AE:4005.0005/input/input9
[    3.171641] hid-generic 0003:24AE:4005.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:13.0-3/input1
[    3.175324] raid6: sse2x2   xor()  2990 MB/s
[    3.178638] hid-generic 0003:24AE:4005.0006: hiddev0,hidraw5: USB HID v1.10 Device [Rapoo Rapoo Gaming Keyboard] on usb-0000:00:13.0-3/input2
[    3.243334] raid6: sse2x4   gen()  3976 MB/s
[    3.311339] raid6: sse2x4   xor()  2140 MB/s
[    3.311340] raid6: using algorithm sse2x4 gen() 3976 MB/s
[    3.311342] raid6: .... xor() 2140 MB/s, rmw enabled
[    3.311343] raid6: using intx1 recovery algorithm
[    3.311609] xor: measuring software checksum speed
[    3.351337]    prefetch64-sse:  6946.000 MB/sec
[    3.391338]    generic_sse:  6717.000 MB/sec
[    3.391339] xor: using function: prefetch64-sse (6946.000 MB/sec)
[    3.391712] async_tx: api initialized (async)
[    3.396131] md: raid6 personality registered for level 6
[    3.396136] md: raid5 personality registered for level 5
[    3.396137] md: raid4 personality registered for level 4
[    3.405003] md: raid10 personality registered for level 10
[    3.424353] Btrfs loaded
[    3.495056] PM: Starting manual resume from disk
[    3.495062] PM: Hibernation image partition 8:2 present
[    3.495064] PM: Looking for hibernation image.
[    3.495286] PM: Image not found (code -22)
[    3.495290] PM: Hibernation image not present or could not be loaded.
[    3.618072] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.751495] clocksource: Switched to clocksource tsc
[    4.203650] random: nonblocking pool is initialized
[    4.624264] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.624413] systemd[1]: Detected architecture x86-64.
[    4.630382] systemd[1]: Set hostname to <fzfz-mini>.
[    5.946671] systemd[1]: Reached target Encrypted Volumes.
[    5.946845] systemd[1]: Listening on udev Kernel Socket.
[    5.946884] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.946922] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.947009] systemd[1]: Listening on Journal Audit Socket.
[    5.947045] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.947069] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.947215] systemd[1]: Created slice User and Session Slice.
[    5.947365] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.947389] systemd[1]: Reached target User and Group Name Lookups.
[    5.947429] systemd[1]: Listening on udev Control Socket.
[    5.947475] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.947513] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.947589] systemd[1]: Listening on Journal Socket.
[    5.947617] systemd[1]: Reached target Remote File Systems.
[    5.947741] systemd[1]: Created slice System Slice.
[    5.947758] systemd[1]: Reached target Slices.
[    5.999837] systemd[1]: Starting Load Kernel Modules...
[    6.000695] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.039864] systemd[1]: Starting Set Up Additional Binary Formats...
[    6.040682] systemd[1]: Mounting Huge Pages File System...
[    6.040893] systemd[1]: Created slice system-getty.slice.
[    6.041773] systemd[1]: Starting Journal Service...
[    6.042621] systemd[1]: Mounting POSIX Message Queue File System...
[    6.043638] systemd[1]: Mounting Debug File System...
[    6.043872] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.043966] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.045787] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.099744] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.102745] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 801 (systemd-binfmt)
[    6.115782] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    6.116669] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.233982] systemd[1]: Started Journal Service.
[    6.605186] lp: driver loaded but no devices found
[    6.643572] ppdev: user-space parallel port driver
[    6.991822] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    6.991848] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    6.991866] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    6.991899] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    7.003798] bcma: bus0: Bus registered
[    7.141800] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 18
[    7.171610] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.307857] bbswitch: version 0.8
[    7.307873] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PCE3.VGA_
[    7.307889] bbswitch: failed to evaluate \_SB_.PCI0.PCE3.VGA_._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[    7.307896] bbswitch: failed to evaluate \_SB_.PCI0.PCE3.VGA_._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[    7.307897] bbswitch: No suitable _DSM call found.
[    7.902187] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    7.980879] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[    8.240059] systemd-journald[805]: Received request to flush runtime journal from PID 1
[    8.522196] ACPI: processor limited to max C-state 1
[    8.606158] cfg80211: World regulatory domain updated:
[    8.606163] cfg80211:  DFS Master region: unset
[    8.606165] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.606168] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.606171] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.606173] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.606175] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.606177] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.606179] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.606181] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.606182] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    8.673768] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.673851] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.698123] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.726147] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.745021] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.745093] sp5100_tco: PCI Revision ID: 0x42
[    8.745132] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    8.745144] sp5100_tco: Last reboot was not triggered by watchdog.
[    8.745203] sp5100_tco: initialized (0xffffc90000760b00). heartbeat=60 sec (nowayout=0)
[    9.111436] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.111541] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    9.877684] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    9.956151] EDAC MC: Ver: 3.0.0
[    9.968833] MCE: In-kernel MCE decoding enabled.
[    9.978554] AMD64 EDAC driver v3.4.0
[    9.978598] EDAC amd64: DRAM ECC disabled.
[    9.978605] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.036109] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   10.188875] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[   10.196478] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   10.196494] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.196502] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.196508] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.196514] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   10.196519] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.196525] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   10.204634] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   10.204985] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   10.205069] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[   10.205151] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[   10.271788] dell_smm_hwmon: unable to get SMM Dell signature
[   10.282600] kvm: Nested Virtualization enabled
[   10.282607] kvm: Nested Paging enabled
[   10.345478] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.464425] Adding 2088444k swap on /dev/sda2.  Priority:-1 extents:1 across:2088444k FS
[   10.632168] bbswitch: version 0.8
[   10.632202] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PCE3.VGA_
[   10.632239] bbswitch: failed to evaluate \_SB_.PCI0.PCE3.VGA_._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   10.632260] bbswitch: failed to evaluate \_SB_.PCI0.PCE3.VGA_._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   10.632265] bbswitch: No suitable _DSM call found.
[   10.732058] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3793 MBytes.
[   10.732734] <6>[fglrx]   vendor: 1002 device: 68e0 revision: 0 count: 1
[   10.733668] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[   10.734156] <6>[fglrx] Kernel PAT support is enabled
[   10.734198] <6>[fglrx] module loaded - fglrx 15.30.3 [Dec 17 2015] with 1 minors
[   11.942201] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[   20.393630] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   20.394770] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<100 Mbps Full Duplex>
[   20.450157] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   20.543839] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[   20.660032] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[   20.725343] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   20.725418] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   20.725651] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   21.226580] NET: Registered protocol family 15
[   21.550934] Initializing XFRM netlink socket
[   22.528636] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   27.985055] vboxdrv: Found 2 processor cores
[   28.001697] vboxdrv: TSC mode is Invariant, tentative frequency 2294251785 Hz
[   28.001701] vboxdrv: Successfully loaded version 5.0.24_Debian (interface 0x00240000)
[   28.140380] <6>[fglrx] Firegl kernel thread PID: 2376
[   28.140589] <6>[fglrx] Firegl kernel thread PID: 2377
[   28.141048] <6>[fglrx] IRQ 29 Enabled
[   28.161387] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   28.161391] <6>[fglrx] Reserved FB block: Unshared offset:f7e0000, size:4000 
[   28.161393] <6>[fglrx] Reserved FB block: Unshared offset:f7e4000, size:51c000 
[   28.161395] <6>[fglrx] Reserved FB block: Unshared offset:3fff3000, size:d000 
[   28.807512] VBoxNetFlt: Successfully started.
[   28.825066] VBoxNetAdp: Successfully started.
[   28.882247] VBoxPciLinuxInit
[   28.943956] vboxpci: IOMMU not found (not registered)
[   38.138459] fuse init (API version 7.23)
[  204.154428] usb 1-3: new high-speed USB device number 3 using ehci-pci
[  204.302961] usb 1-3: New USB device found, idVendor=148f, idProduct=5572
[  204.302973] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  204.302981] usb 1-3: Product: 802.11 n WLAN
[  204.302987] usb 1-3: Manufacturer: Ralink
[  204.302993] usb 1-3: SerialNumber: 1.0
[  204.514485] usb 1-3: reset high-speed USB device number 3 using ehci-pci
[  204.656028] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[  204.685150] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[  204.685756] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  204.686193] usbcore: registered new interface driver rt2800usb
[  204.708906] rt2800usb 1-3:1.0 wlx0c8268319ea7: renamed from wlan0
[  204.747821] IPv6: ADDRCONF(NETDEV_UP): wlx0c8268319ea7: link is not ready
[  204.747871] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  204.752807] rt2800usb 1-3:1.0: firmware: direct-loading firmware rt2870.bin
[  204.752818] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  205.106992] IPv6: ADDRCONF(NETDEV_UP): wlx0c8268319ea7: link is not ready
[  205.161549] IPv6: ADDRCONF(NETDEV_UP): wlx0c8268319ea7: link is not ready
[  243.543638] wlx0c8268319ea7: authenticate with 8c:34:fd:ef:6c:d8
[  243.655205] wlx0c8268319ea7: send auth to 8c:34:fd:ef:6c:d8 (try 1/3)
[  243.655675] wlx0c8268319ea7: authenticated
[  243.658401] wlx0c8268319ea7: associate with 8c:34:fd:ef:6c:d8 (try 1/3)
[  243.659820] wlx0c8268319ea7: RX AssocResp from 8c:34:fd:ef:6c:d8 (capab=0x411 status=0 aid=1)
[  243.678011] wlx0c8268319ea7: associated
[  243.678075] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0c8268319ea7: link becomes ready
[  243.860096] cfg80211: Regulatory domain changed to country: US
[  243.860103] cfg80211:  DFS Master region: FCC
[  243.860105] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  243.860109] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[  243.860113] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[  243.860116] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[  243.860119] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[  243.860121] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[  243.860123] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  479.461378] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  479.624133] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  480.214739] Bluetooth: Core ver 2.21
[  480.214763] NET: Registered protocol family 31
[  480.214765] Bluetooth: HCI device and connection manager initialized
[  480.214770] Bluetooth: HCI socket layer initialized
[  480.214773] Bluetooth: L2CAP socket layer initialized
[  480.214779] Bluetooth: SCO socket layer initialized
[  480.344198] atl1c 0000:03:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
