[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-3-deepin-amd64 (yangbo@deepin.com) (gcc version 5.4.1 20160803 (Debian 5.4.1-1) ) #1 SMP Deepin 4.4.30-2 (2016-12-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-3-deepin-amd64 root=UUID=7c21d9ce-8caf-48e1-b198-e9a353e3da3d ro acpi_enforce_resources=lax splash quiet
[    0.000000] tseg: 0000000000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7e7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7e80000-0x00000000c7e97fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c7e98000-0x00000000c7ebffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7efffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: TSINGHUA TONGFANG COMPUTER M5A78L-M LX3/TF/M5A78L-M LX3/TF, BIOS P78     01/27/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000238000000 aka 9088M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xc7e80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[    0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33444000-0x35a19fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBA30 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000C7E80100 00005C (v01 THTFPC TONGFANG 20140127 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C7E80290 0000F4 (v03 THTFPC FACP1644 20140127 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150930/tbfadt-623)
[    0.000000] ACPI: DSDT 0x00000000C7E80460 00D3F7 (v01 A2547  A2547001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000C7E98000 000040
[    0.000000] ACPI: FACS 0x00000000C7E98000 000040
[    0.000000] ACPI: APIC 0x00000000C7E80390 00008C (v01 THTFPC APIC1644 20140127 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C7E80420 00003C (v01 THTFPC OEMMCFG  20140127 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C7E98040 000072 (v01 THTFPC OEMB1644 20140127 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C7E8F460 000038 (v01 THTFPC OEMHPET  20140127 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C7E8F4A0 000B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SLIC 0x00000000C7E90040 000176 (v01 THTFPC TONGFANG 20140127 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x237ffa000-0x237ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c7e7ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[    0.000000] On node 0 totalpages: 2096670
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12730 pages used for memmap
[    0.000000]   DMA32 zone: 814720 pages, LIFO batch:31
[    0.000000]   Normal zone: 19968 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7e80000-0xc7e97fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7e98000-0xc7ebffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7efffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xc7f00000-0xffdfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff880237c00000 s92952 r8192 d29928 u262144
[    0.000000] pcpu-alloc: s92952 r8192 d29928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063887
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-3-deepin-amd64 root=UUID=7c21d9ce-8caf-48e1-b198-e9a353e3da3d ro acpi_enforce_resources=lax splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[    0.000000] Memory: 8070388K/8386680K available (5729K kernel code, 1070K rwdata, 2876K rodata, 1308K init, 828K bss, 316292K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3817.219 MHz processor
[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 7634.43 BogoMIPS (lpj=15268876)
[    0.000023] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20150930
[    0.005528] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.005553] Security Framework initialized
[    0.005554] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005560] AppArmor: AppArmor disabled by boot time parameter
[    0.006052] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008033] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008903] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008912] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009141] Initializing cgroup subsys io
[    0.009144] Initializing cgroup subsys memory
[    0.009206] Disabling memory control group subsystem
[    0.009207] Initializing cgroup subsys devices
[    0.009209] Initializing cgroup subsys freezer
[    0.009212] Initializing cgroup subsys net_cls
[    0.009215] Initializing cgroup subsys perf_event
[    0.009217] Initializing cgroup subsys net_prio
[    0.009219] Initializing cgroup subsys pids
[    0.009239] CPU: Physical Processor ID: 0
[    0.009240] CPU: Processor Core ID: 0
[    0.009241] mce: CPU supports 7 MCE banks
[    0.009247] LVT offset 1 assigned for vector 0xf9
[    0.009252] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.009253] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.009467] Freeing SMP alternatives memory: 24K (ffffffff81c54000 - ffffffff81c5a000)
[    0.019720] ftrace: allocating 23740 entries in 93 pages
[    0.026279] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.170734] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.170758] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.170762] ... version:                0
[    0.170763] ... bit width:              48
[    0.170763] ... generic registers:      6
[    0.170764] ... value mask:             0000ffffffffffff
[    0.170765] ... max period:             00007fffffffffff
[    0.170766] ... fixed-purpose events:   0
[    0.170767] ... event mask:             000000000000003f
[    0.171190] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.171261] x86: Booting SMP configuration:
[    0.171262] .... node  #0, CPUs:      #1 #2 #3
[    0.183963] x86: Booted up 1 node, 4 CPUs
[    0.183966] smpboot: Total of 4 processors activated (30537.75 BogoMIPS)
[    0.186572] devtmpfs: initialized
[    0.189617] PM: Registering ACPI NVS region [mem 0xc7e98000-0xc7ebffff] (163840 bytes)
[    0.189687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.189763] pinctrl core: initialized pinctrl subsystem
[    0.189873] NET: Registered protocol family 16
[    0.198749] cpuidle: using governor ladder
[    0.209510] cpuidle: using governor menu
[    0.209570] ACPI: bus type PCI registered
[    0.209572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.209640] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.209642] PCI: not using MMCONFIG
[    0.209643] PCI: Using configuration type 1 for base access
[    0.209644] PCI: Using configuration type 1 for extended access
[    0.209902] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.209903] mtrr: probably your BIOS does not setup all CPUs.
[    0.209904] mtrr: corrected configuration.
[    0.219098] ACPI: Added _OSI(Module Device)
[    0.219100] ACPI: Added _OSI(Processor Device)
[    0.219101] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.219102] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220896] ACPI: Executed 3 blocks of module-level executable AML code
[    0.224188] ACPI: Interpreter enabled
[    0.224207] ACPI: (supports S0 S3 S4 S5)
[    0.224208] ACPI: Using IOAPIC for interrupt routing
[    0.224230] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.225141] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.225150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.229631] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.229635] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.229639] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.229866] PCI host bridge to bus 0000:00
[    0.229869] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.229870] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.229872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.229874] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.229875] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[    0.229876] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.229878] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.229886] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[    0.229979] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[    0.230013] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.230046] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.230082] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[    0.230114] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.230147] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.230198] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.230224] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.230233] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.230242] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.230251] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.230260] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.230269] pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff]
[    0.230289] pci 0000:00:11.0: set SATA to AHCI mode
[    0.230367] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.230382] pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff]
[    0.230466] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.230500] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.230515] pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff]
[    0.230599] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.230637] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.230662] pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff]
[    0.230732] pci 0000:00:12.2: supports D1 D2
[    0.230734] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.230770] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.230810] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.230825] pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff]
[    0.230908] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.230944] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.230959] pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff]
[    0.231043] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.231080] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.231105] pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff]
[    0.231174] pci 0000:00:13.2: supports D1 D2
[    0.231175] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.231210] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.231251] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.231392] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.231415] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.231424] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.231433] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.231442] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.231450] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.231470] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.231471] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.231473] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.231474] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.231549] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.231575] pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit]
[    0.231633] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.231667] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.231701] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.231825] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.231888] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.231922] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.231937] pci 0000:00:14.5: reg 0x10: [mem 0xfcffa000-0xfcffafff]
[    0.232021] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.232057] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.232119] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.232176] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.232235] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.232295] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.232354] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.232457] pci 0000:01:00.0: [10de:0fc2] type 00 class 0x030000
[    0.232477] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.232487] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.232497] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.232504] pci 0000:01:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.232511] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[    0.232589] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    0.232609] pci 0000:01:00.1: reg 0x10: [mem 0xfea7c000-0xfea7ffff]
[    0.241809] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.241812] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.241815] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.241818] pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.241876] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[    0.241918] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[    0.241929] pci 0000:02:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.242008] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242041] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.249807] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.249811] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.249813] pci 0000:00:04.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.249892] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.249900] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.249902] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.249903] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.249905] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.249906] pci 0000:00:14.4:   bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[    0.249907] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.250414] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
[    0.250451] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.250486] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.250520] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.250555] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.250589] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.250624] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[    0.250657] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.250715] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.250825] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.250826] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.250827] vgaarb: loaded
[    0.250828] vgaarb: bridge control possible 0000:01:00.0
[    0.250908] PCI: Using ACPI for IRQ routing
[    0.259511] PCI: pci_cache_line_size set to 64 bytes
[    0.259559] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.259560] e820: reserve RAM buffer [mem 0xc7e80000-0xc7ffffff]
[    0.259687] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.259690] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.261727] clocksource: Switched to clocksource hpet
[    0.267155] pnp: PnP ACPI init
[    0.267293] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267339] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.267696] pnp 00:02: [dma 0 disabled]
[    0.267756] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.267841] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.267843] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.267846] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268041] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.268043] system 00:04: [io  0x040b] has been reserved
[    0.268045] system 00:04: [io  0x04d6] has been reserved
[    0.268046] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.268048] system 00:04: [io  0x0c14] has been reserved
[    0.268049] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.268051] system 00:04: [io  0x0c52] has been reserved
[    0.268053] system 00:04: [io  0x0c6c] has been reserved
[    0.268055] system 00:04: [io  0x0c6f] has been reserved
[    0.268056] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.268058] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.268059] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.268061] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.268063] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.268064] system 00:04: [io  0x0b00-0x0b3f] has been reserved
[    0.268066] system 00:04: [io  0x0800-0x089f] could not be reserved
[    0.268068] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.268070] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.268071] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.268073] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.268074] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.268076] system 00:04: [mem 0xc7f00000-0xc7ffffff] has been reserved
[    0.268078] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.268079] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.268081] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.268083] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268247] system 00:05: [io  0x0230-0x023f] has been reserved
[    0.268249] system 00:05: [io  0x0290-0x029f] has been reserved
[    0.268250] system 00:05: [io  0x0300-0x030f] has been reserved
[    0.268252] system 00:05: [io  0x0a30-0x0a3f] has been reserved
[    0.268254] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268303] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.268305] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268521] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.268523] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.268525] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.268527] system 00:07: [mem 0x00100000-0xc7efffff] could not be reserved
[    0.268528] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.268530] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.268609] pnp: PnP ACPI: found 8 devices
[    0.275132] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.275150] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.275153] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.275156] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.275158] pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.275161] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.275163] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.275165] pci 0000:00:04.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.275169] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.275181] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.275182] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.275184] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.275186] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.275187] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.275188] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.275190] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.275191] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
[    0.275193] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.275195] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.275196] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.275198] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.275199] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.275200] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.275202] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.275203] pci_bus 0000:03: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.275204] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.275268] NET: Registered protocol family 2
[    0.275449] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.275605] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.275817] TCP: Hash tables configured (established 65536 bind 65536)
[    0.275854] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.275887] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.275976] NET: Registered protocol family 1
[    0.697823] pci 0000:01:00.0: Video device with shadowed ROM
[    0.697832] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.697835] PCI: CLS 64 bytes, default 64
[    0.697875] Unpacking initramfs...
[    1.153303] microcode: microcode: updated early to new patch_level=0x0600084f
[    1.161458] Freeing initrd memory: 38744K (ffff880033444000 - ffff880035a1a000)
[    1.161666] PCI-DMA: Disabling AGP.
[    1.161744] PCI-DMA: aperture base @ bc000000 size 65536 KB
[    1.161745] PCI-DMA: using GART IOMMU.
[    1.161747] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.166061] perf: AMD NB counters detected
[    1.166093] LVT offset 0 assigned for vector 0x400
[    1.166109] perf: AMD IBS detected (0x000000ff)
[    1.166443] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.166482] audit: initializing netlink subsys (disabled)
[    1.166497] audit: type=2000 audit(1481973179.052:1): initialized
[    1.166852] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.166868] zbud: loaded
[    1.166973] VFS: Disk quotas dquot_6.6.0
[    1.166992] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.167522] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.167561] io scheduler noop registered
[    1.167564] io scheduler deadline registered
[    1.167586] io scheduler cfq registered (default)
[    1.167887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.167893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.167928] GHES: HEST is not enabled!
[    1.167985] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.188424] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.188763] Linux agpgart interface v0.103
[    1.188795] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.188796] AMD IOMMUv2 functionality not available on this system
[    1.189124] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.189481] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.189485] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.189597] mousedev: PS/2 mouse device common for all mice
[    1.189635] rtc_cmos 00:01: RTC can wake from S4
[    1.189762] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.189784] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.189795] ledtrig-cpu: registered to indicate activity on CPUs
[    1.190237] NET: Registered protocol family 10
[    1.190409] mip6: Mobile IPv6
[    1.190412] NET: Registered protocol family 17
[    1.190417] mpls_gso: MPLS GSO support
[    1.190710] microcode: CPU0: patch_level=0x0600084f
[    1.190715] microcode: CPU1: patch_level=0x0600084f
[    1.190722] microcode: CPU2: patch_level=0x0600084f
[    1.190729] microcode: CPU3: patch_level=0x0600084f
[    1.190759] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.190891] registered taskstats version 1
[    1.190913] zswap: loaded using pool lzo/zbud
[    1.191211] rtc_cmos 00:01: setting system clock to 2016-12-17 11:12:59 UTC (1481973179)
[    1.191251] PM: Hibernation image not present or could not be loaded.
[    1.192284] Freeing unused kernel memory: 1308K (ffffffff81b0d000 - ffffffff81c54000)
[    1.192285] Write protecting the kernel read-only data: 10240k
[    1.192495] Freeing unused kernel memory: 404K (ffff88000159b000 - ffff880001600000)
[    1.194876] Freeing unused kernel memory: 1220K (ffff8800018cf000 - ffff880001a00000)
[    1.201577] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.211556] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.211618] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.211627] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.211637] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212164] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212211] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212432] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212481] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212528] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.212574] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.234991] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.234998] ACPI: Power Button [PWRB]
[    1.235054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.235057] ACPI: Power Button [PWRF]
[    1.236389] wmi: Mapper loaded
[    1.240704] ACPI: bus type USB registered
[    1.240733] usbcore: registered new interface driver usbfs
[    1.240747] usbcore: registered new interface driver hub
[    1.240775] usbcore: registered new device driver usb
[    1.241142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.241331] ehci-pci: EHCI PCI platform driver
[    1.241507] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.241513] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.241519] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.241530] ehci-pci 0000:00:12.2: debug port 1
[    1.241566] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800
[    1.242241] SCSI subsystem initialized
[    1.242264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.243448] libata version 3.00 loaded.
[    1.245494] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.249802] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.249857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.249860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.249862] usb usb1: Product: EHCI Host Controller
[    1.249863] usb usb1: Manufacturer: Linux 4.4.0-3-deepin-amd64 ehci_hcd
[    1.249865] usb usb1: SerialNumber: 0000:00:12.2
[    1.250157] hub 1-0:1.0: USB hub found
[    1.250164] hub 1-0:1.0: 6 ports detected
[    1.250448] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.250454] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.250458] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.250468] ehci-pci 0000:00:13.2: debug port 1
[    1.250508] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcfff400
[    1.252860] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [38:2c:4a:ba:d8:18]
[    1.261095] [drm] Initialized drm 1.1.0 20060810
[    1.261734] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.261810] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.261813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.261815] usb usb2: Product: EHCI Host Controller
[    1.261816] usb usb2: Manufacturer: Linux 4.4.0-3-deepin-amd64 ehci_hcd
[    1.261818] usb usb2: SerialNumber: 0000:00:13.2
[    1.261943] hub 2-0:1.0: USB hub found
[    1.261955] hub 2-0:1.0: 6 ports detected
[    1.262252] ahci 0000:00:11.0: version 3.0
[    1.262466] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.262470] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.262488] ohci-pci: OHCI PCI platform driver
[    1.263882] scsi host0: ahci
[    1.267389] scsi host1: ahci
[    1.268264] nouveau 0000:01:00.0: NVIDIA GK107 (0e7020a2)
[    1.268709] scsi host2: ahci
[    1.269670] scsi host3: ahci
[    1.269760] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
[    1.269765] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
[    1.269767] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
[    1.269770] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
[    1.269925] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.269931] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.269963] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
[    1.329898] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.329901] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329903] usb usb3: Product: OHCI PCI host controller
[    1.329905] usb usb3: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    1.329906] usb usb3: SerialNumber: 0000:00:12.0
[    1.330016] hub 3-0:1.0: USB hub found
[    1.330028] hub 3-0:1.0: 3 ports detected
[    1.330449] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.330454] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.330478] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
[    1.349424] alx 0000:02:00.0 enp2s0: renamed from eth0
[    1.367012] nouveau 0000:01:00.0: bios: version 80.07.46.00.3e
[    1.367833] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.394232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.394235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.394237] usb usb4: Product: OHCI PCI host controller
[    1.394238] usb usb4: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    1.394240] usb usb4: SerialNumber: 0000:00:12.1
[    1.394373] hub 4-0:1.0: USB hub found
[    1.394386] hub 4-0:1.0: 3 ports detected
[    1.394654] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.394660] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.394689] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
[    1.453857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.453859] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.453860] usb usb5: Product: OHCI PCI host controller
[    1.453862] usb usb5: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    1.453863] usb usb5: SerialNumber: 0000:00:13.0
[    1.453971] hub 5-0:1.0: USB hub found
[    1.453984] hub 5-0:1.0: 3 ports detected
[    1.454199] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.454204] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.454227] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
[    1.513798] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.513800] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.513801] usb usb6: Product: OHCI PCI host controller
[    1.513802] usb usb6: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    1.513804] usb usb6: SerialNumber: 0000:00:13.1
[    1.513943] hub 6-0:1.0: USB hub found
[    1.513955] hub 6-0:1.0: 3 ports detected
[    1.515016] scsi host4: pata_atiixp
[    1.515211] scsi host5: pata_atiixp
[    1.515261] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.515263] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.515398] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.515403] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.515425] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000
[    1.573813] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.573816] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.573817] usb usb7: Product: OHCI PCI host controller
[    1.573819] usb usb7: Manufacturer: Linux 4.4.0-3-deepin-amd64 ohci_hcd
[    1.573820] usb usb7: SerialNumber: 0000:00:14.5
[    1.573930] hub 7-0:1.0: USB hub found
[    1.573943] hub 7-0:1.0: 2 ports detected
[    1.589758] ata2: SATA link down (SStatus 0 SControl 300)
[    1.589806] ata4: SATA link down (SStatus 0 SControl 300)
[    1.761780] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.761830] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.762282] ata1.00: HPA detected: current 1915572541, native 1953525168
[    1.762520] ata1.00: ATA-9: WDC WD10EZEX-22BN5A0, 01.01A01, max UDMA/133
[    1.762578] ata1.00: 1915572541 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.763248] ata1.00: configured for UDMA/133
[    1.763457] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-22B 1A01 PQ: 0 ANSI: 5
[    1.764901] ata3.00: ATAPI: ATAPI   DVD A  DH16AESH, 3C21, max UDMA/100
[    1.765828] ata3.00: configured for UDMA/100
[    1.777734] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    1.785386] scsi 2:0:0:0: CD-ROM            ATAPI    DVD A  DH16AESH  3C21 PQ: 0 ANSI: 5
[    1.810750] sd 0:0:0:0: [sda] 1915572541 512-byte logical blocks: (981 GB/913 GiB)
[    1.810754] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.810813] sd 0:0:0:0: [sda] Write Protect is off
[    1.810817] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.810839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.820713] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.820716] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.820843] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.861067]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.869597] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.926900] ohci-pci 0000:00:12.0: leak ed ffff8800c1325000 (#00) state 2
[    1.952882] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[    1.952884] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.952885] usb 3-1: Product: USB Optical Mouse
[    1.952887] usb 3-1: Manufacturer: Logitech
[    2.089701] usb 3-2: new low-speed USB device number 3 using ohci-pci
[    2.165714] tsc: Refined TSC clocksource calibration: 3817.136 MHz
[    2.165717] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e0b2ab757c, max_idle_ns: 881591200151 ns
[    2.289904] usb 3-2: New USB device found, idVendor=046d, idProduct=c31c
[    2.289965] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.290017] usb 3-2: Product: USB Keyboard
[    2.290069] usb 3-2: Manufacturer: Logitech
[    2.304876] hidraw: raw HID events driver (C) Jiri Kosina
[    2.320988] usbcore: registered new interface driver usbhid
[    2.320991] usbhid: USB HID core driver
[    2.322433] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C05A.0001/input/input5
[    2.322760] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[    2.322934] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C31C.0002/input/input6
[    2.377902] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-2/input0
[    2.380877] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C31C.0003/input/input7
[    2.433769] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-2/input1
[    2.666001] [TTM] Zone  kernel: Available graphics memory: 4089020 kiB
[    2.666003] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.666004] [TTM] Initializing pool allocator
[    2.666008] [TTM] Initializing DMA pool allocator
[    2.666018] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    2.666019] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.666023] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.666025] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.666027] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000f10 00000000
[    2.666029] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011f02 00020030
[    2.666030] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f62 00020010
[    2.666032] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    2.666033] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001131
[    2.666035] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[    2.667419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.667420] [drm] Driver supports precise vblank timestamp query.
[    2.725394] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    2.816237] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x60000, bo ffff880229a94000
[    2.816304] fbcon: nouveaufb (fb0) is primary device
[    3.058985] Console: switching to colour frame buffer device 180x56
[    3.060984] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.069694] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    3.080451] md: linear personality registered for level -1
[    3.082066] md: multipath personality registered for level -4
[    3.083164] md: raid0 personality registered for level 0
[    3.085402] md: raid1 personality registered for level 1
[    3.153682] raid6: sse2x1   gen()  6857 MB/s
[    3.221675] raid6: sse2x1   xor()  4542 MB/s
[    3.289671] raid6: sse2x2   gen()  8979 MB/s
[    3.357667] raid6: sse2x2   xor()  5714 MB/s
[    3.425669] raid6: sse2x4   gen()  9716 MB/s
[    3.493667] raid6: sse2x4   xor()  5449 MB/s
[    3.493668] raid6: using algorithm sse2x4 gen() 9716 MB/s
[    3.493669] raid6: .... xor() 5449 MB/s, rmw enabled
[    3.493670] raid6: using ssse3x2 recovery algorithm
[    3.493681] clocksource: Switched to clocksource tsc
[    3.493821] xor: automatically using best checksumming function:
[    3.533661]    avx       :  4449.000 MB/sec
[    3.533821] async_tx: api initialized (async)
[    3.534796] md: raid6 personality registered for level 6
[    3.534797] md: raid5 personality registered for level 5
[    3.534799] md: raid4 personality registered for level 4
[    3.538909] md: raid10 personality registered for level 10
[    4.000117] Btrfs loaded
[    4.071163] PM: Starting manual resume from disk
[    4.071168] PM: Hibernation image partition 8:6 present
[    4.071169] PM: Looking for hibernation image.
[    4.071292] PM: Image not found (code -22)
[    4.071293] PM: Hibernation image not present or could not be loaded.
[    4.164072] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.465764] random: nonblocking pool is initialized
[    5.095828] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.095955] systemd[1]: Detected architecture x86-64.
[    5.101091] systemd[1]: Set hostname to <ww-deepin>.
[    6.186666] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.186723] systemd[1]: Reached target User and Group Name Lookups.
[    6.186825] systemd[1]: Created slice User and Session Slice.
[    6.186857] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.186865] systemd[1]: Reached target Encrypted Volumes.
[    6.186890] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.186906] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.186976] systemd[1]: Created slice System Slice.
[    6.187053] systemd[1]: Created slice system-getty.slice.
[    6.187081] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.187102] systemd[1]: Listening on udev Kernel Socket.
[    6.187128] systemd[1]: Listening on Journal Socket.
[    6.197662] systemd[1]: Mounting POSIX Message Queue File System...
[    6.198179] systemd[1]: Mounting Huge Pages File System...
[    6.200049] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.200664] systemd[1]: Mounting Debug File System...
[    6.200741] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.200771] systemd[1]: Reached target Remote File Systems.
[    6.201321] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.201345] systemd[1]: Reached target Slices.
[    6.210812] systemd[1]: Starting Load Kernel Modules...
[    6.210899] systemd[1]: Listening on Journal Audit Socket.
[    6.211390] systemd[1]: Starting Journal Service...
[    6.211434] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.211479] systemd[1]: Listening on udev Control Socket.
[    6.211634] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.232212] systemd[1]: Starting Set Up Additional Binary Formats...
[    6.283732] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.297764] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.298852] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 786 (systemd-binfmt)
[    6.299382] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    6.408116] systemd[1]: Started Journal Service.
[    6.469986] lp: driver loaded but no devices found
[    6.472192] ppdev: user-space parallel port driver
[    6.733872] it87: Found IT8771E chip at 0x290, revision 2
[    6.733913] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB_.PCI0.SBRG.SIOR.ECRE) (20150930/utaddress-254)
[    6.733918] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB_.PCI0.SBRG.ASOC.SIOE) (20150930/utaddress-254)
[    6.733921] ACPI: This conflict may cause random problems and system instability
[    6.733922] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.780006] bbswitch: version 0.8
[    6.780015] bbswitch: cannot find ACPI handle for VGA device 0000:01:00.0
[    6.780017] bbswitch: No discrete VGA device found
[    7.551083] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[    7.741917] systemd-journald[783]: Received request to flush runtime journal from PID 1
[    7.743386] bbswitch: version 0.8
[    7.743396] bbswitch: cannot find ACPI handle for VGA device 0000:01:00.0
[    7.743398] bbswitch: No discrete VGA device found
[    7.758332] ACPI: acpi_idle registered with cpuidle
[    7.849159] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.983732] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254)
[    7.983737] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20150930/utaddress-254)
[    7.983742] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB_.PCI0.SBRG.ASOC.SMRG) (20150930/utaddress-254)
[    7.983745] ACPI: This conflict may cause random problems and system instability
[    7.983746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.983754] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    7.983789] ACPI Warning: SystemIO range 0x0000000000000B20-0x0000000000000B27 conflicts with OpRegion 0x0000000000000B20-0x0000000000000B2F (\SOR2) (20150930/utaddress-254)
[    7.983793] ACPI Warning: SystemIO range 0x0000000000000B20-0x0000000000000B27 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20150930/utaddress-254)
[    7.983796] ACPI Warning: SystemIO range 0x0000000000000B20-0x0000000000000B27 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB_.PCI0.SBRG.ASOC.SMRG) (20150930/utaddress-254)
[    7.983798] ACPI: This conflict may cause random problems and system instability
[    7.983799] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.983801] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.035092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.150491] bbswitch: version 0.8
[    8.150508] bbswitch: cannot find ACPI handle for VGA device 0000:01:00.0
[    8.150511] bbswitch: No discrete VGA device found
[    8.159011] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.159056] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    8.190082] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
[    8.196037] EDAC MC: Ver: 3.0.0
[    8.203761] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.203831] sp5100_tco: PCI Revision ID: 0x3c
[    8.203850] sp5100_tco: failed to find MMIO address, giving up.
[    8.229847] MCE: In-kernel MCE decoding enabled.
[    8.315797] AMD64 EDAC driver v3.4.0
[    8.315839] EDAC amd64: DRAM ECC disabled.
[    8.315849] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.353002] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    8.769536] snd_hda_intel 0000:01:00.1: Disabling MSI
[    8.769563] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    8.843627] AVX version of gcm_enc/dec engaged.
[    8.843630] AES CTR mode by8 optimization enabled
[    8.956310] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.956326] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.956330] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.956334] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.956336] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.956340] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.956344] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.956347] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.971663] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    8.971727] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    8.971783] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    8.971838] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    8.971893] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    9.143091] bbswitch: version 0.8
[    9.143102] bbswitch: cannot find ACPI handle for VGA device 0000:01:00.0
[    9.143105] bbswitch: No discrete VGA device found
[   10.065146] Adding 1998844k swap on /dev/sda6.  Priority:-1 extents:1 across:1998844k FS
[   10.303305] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   10.303462] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   10.776109] kvm: Nested Virtualization enabled
[   10.776124] kvm: Nested Paging enabled
[   19.035583] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.036331] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.037124] alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
[   19.037361] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   20.033152] NET: Registered protocol family 15
[   20.322428] Initializing XFRM netlink socket
[   24.920123] vboxdrv: Found 4 processor cores
[   24.937867] vboxdrv: TSC mode is Invariant, tentative frequency 3817124649 Hz
[   24.937873] vboxdrv: Successfully loaded version 5.0.24_Debian (interface 0x00240000)
[   25.083125] VBoxNetFlt: Successfully started.
[   25.316113] VBoxNetAdp: Successfully started.
[   25.366625] VBoxPciLinuxInit
[   25.399925] vboxpci: IOMMU not found (not registered)
[  372.281355] fuse init (API version 7.23)
[  376.027125] Bluetooth: Core ver 2.21
[  376.027147] NET: Registered protocol family 31
[  376.027149] Bluetooth: HCI device and connection manager initialized
[  376.027155] Bluetooth: HCI socket layer initialized
[  376.027159] Bluetooth: L2CAP socket layer initialized
[  376.027168] Bluetooth: SCO socket layer initialized
[  420.220779] usb 1-6: new high-speed USB device number 4 using ehci-pci
[  420.355085] usb 1-6: New USB device found, idVendor=0951, idProduct=1642
[  420.355092] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  420.355096] usb 1-6: Product: DT 101 G2
[  420.355100] usb 1-6: Manufacturer: Kingston
[  420.355104] usb 1-6: SerialNumber: 001CC07CEE5CACB1390B01CE
[  420.421138] usb-storage 1-6:1.0: USB Mass Storage device detected
[  420.421313] scsi host6: usb-storage 1-6:1.0
[  420.421466] usbcore: registered new interface driver usb-storage
[  420.435670] usbcore: registered new interface driver uas
[  422.522453] scsi 6:0:0:0: Direct-Access     Kingston DT 101 G2        1.00 PQ: 0 ANSI: 4
[  422.523126] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  422.524174] sd 6:0:0:0: [sdb] 30474240 512-byte logical blocks: (15.6 GB/14.5 GiB)
[  422.526553] sd 6:0:0:0: [sdb] Write Protect is off
[  422.526561] sd 6:0:0:0: [sdb] Mode Sense: 2f 00 00 00
[  422.528929] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  422.536444]  sdb: sdb1
[  422.543661] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  643.644760] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
