[    0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-2-deepin-amd64 (yangbo@deepin.com) (gcc version 5.3.1 20151219 (Debian 5.3.1-4) ) #1 SMP Deepin 4.4.6-4 (2016-07-01)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=8efb68dd-55f2-4b94-91d9-0845dd06574a ro splash quiet
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bab0efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bab0f000-0x00000000bad24fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bad25000-0x00000000bad2cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bad2d000-0x00000000bad4efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bad4f000-0x00000000bad6efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bad6f000-0x00000000baf1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baf1f000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: FUJITSU LIFEBOOK LH531/FJNBB17, BIOS 1.08 06/03/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13FE00000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x01d2a000, 0x01d2afff] PGTABLE
[    0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[    0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33e7a000-0x35f34fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 FUJ   )
[    0.000000] ACPI: XSDT 0x00000000BAFFE120 00008C (v01 FUJ    PC       00000002 FUJ  00000002)
[    0.000000] ACPI: FACP 0x00000000BAFF0000 0000F4 (v03 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000BAFF3000 00841D (v02 FUJ    FJNBB17  01080000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF3E000 000040
[    0.000000] ACPI: FACS 0x00000000BAF3E000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 FUJ    PC       01080000 FUJ  00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFC000 000537 (v01 FUJ    PtidDevc 01080000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF2000 0000A5 (v32 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000BAFEF000 000038 (v01 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000BAFEE000 000098 (v01 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000BAFED000 00003C (v01 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFEC000 000C29 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFEB000 00090C (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFEA000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE9000 00003E (v01 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000BAFE8000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 000242 (v01 FUJ    PC       00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fdf9000-0x13fdfcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bab0efff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fdfffff]
[    0.000000] On node 0 totalpages: 1026220
[    0.000000]   DMA32 zone: 11947 pages used for memmap
[    0.000000]   DMA32 zone: 156 pages reserved
[    0.000000]   DMA32 zone: 764588 pages, LIFO batch:31
[    0.000000]   Normal zone: 4088 pages used for memmap
[    0.000000]   Normal zone: 261632 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab0f000-0xbad24fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad25000-0xbad2cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad2d000-0xbad4efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad4f000-0xbad6efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbad6f000-0xbaf1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf1f000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013fa00000 s92888 r8192 d29992 u262144
[    0.000000] pcpu-alloc: s92888 r8192 d29992 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010029
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=8efb68dd-55f2-4b94-91d9-0845dd06574a ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3924420K/4104880K available (5712K kernel code, 1066K rwdata, 2856K rodata, 1308K init, 828K bss, 180460K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.948 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.89 BogoMIPS (lpj=8779792)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000047] ACPI: Core revision 20150930
[    0.008133] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.008160] Security Framework initialized
[    0.008162] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.008169] AppArmor: AppArmor disabled by boot time parameter
[    0.008459] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009396] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009804] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009813] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010032] Initializing cgroup subsys io
[    0.010035] Initializing cgroup subsys memory
[    0.010149] Disabling memory control group subsystem
[    0.010150] Initializing cgroup subsys devices
[    0.010152] Initializing cgroup subsys freezer
[    0.010154] Initializing cgroup subsys net_cls
[    0.010157] Initializing cgroup subsys perf_event
[    0.010160] Initializing cgroup subsys net_prio
[    0.010162] Initializing cgroup subsys pids
[    0.010185] Disabled fast string operations
[    0.010187] CPU: Physical Processor ID: 0
[    0.010188] CPU: Processor Core ID: 0
[    0.010192] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010193] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010195] mce: CPU supports 7 MCE banks
[    0.010208] CPU0: Thermal monitoring enabled (TM1)
[    0.010214] process: using mwait in idle threads
[    0.010217] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.010218] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.010623] Freeing SMP alternatives memory: 24K (ffffffff81c53000 - ffffffff81c59000)
[    0.012470] ftrace: allocating 23691 entries in 93 pages
[    0.023349] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.023807] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063495] TSC deadline timer enabled
[    0.063499] smpboot: CPU0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.063532] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.063554] ... version:                3
[    0.063555] ... bit width:              48
[    0.063556] ... generic registers:      8
[    0.063557] ... value mask:             0000ffffffffffff
[    0.063558] ... max period:             0000ffffffffffff
[    0.063559] ... fixed-purpose events:   3
[    0.063560] ... event mask:             00000007000000ff
[    0.064154] x86: Booting SMP configuration:
[    0.064156] .... node  #0, CPUs:      #1
[    0.064699] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[    0.064721] Disabled fast string operations
[    0.066789] x86: Booted up 1 node, 2 CPUs
[    0.066792] smpboot: Total of 2 processors activated (8779.79 BogoMIPS)
[    0.066925] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068177] devtmpfs: initialized
[    0.070815] PM: Registering ACPI NVS region [mem 0xbad25000-0xbad2cfff] (32768 bytes)
[    0.070817] PM: Registering ACPI NVS region [mem 0xbad4f000-0xbad6efff] (131072 bytes)
[    0.070821] PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
[    0.070912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.070989] pinctrl core: initialized pinctrl subsystem
[    0.071138] NET: Registered protocol family 16
[    0.082803] cpuidle: using governor ladder
[    0.090803] cpuidle: using governor menu
[    0.090946] ACPI: bus type PCI registered
[    0.090959] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.091049] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.091051] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.091057] PCI: Using configuration type 1 for base access
[    0.091391] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091402] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.091407] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.091408] mtrr: probably your BIOS does not setup all CPUs.
[    0.091409] mtrr: corrected configuration.
[    0.103295] ACPI: Added _OSI(Module Device)
[    0.103297] ACPI: Added _OSI(Processor Device)
[    0.103298] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.103299] ACPI: Added _OSI(Processor Aggregator Device)
[    0.106071] ACPI: Executed 1 blocks of module-level executable AML code
[    0.108642] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.109097] ACPI: Dynamic OEM Table Load:
[    0.109105] ACPI: SSDT 0xFFFF88013B098800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.109677] ACPI: Dynamic OEM Table Load:
[    0.109682] ACPI: SSDT 0xFFFF88013A712C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.110171] ACPI: Dynamic OEM Table Load:
[    0.110175] ACPI: SSDT 0xFFFF88013A6E9600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.110719] ACPI : EC: EC started
[    0.110803] ACPI: Interpreter enabled
[    0.110814] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.110828] ACPI: (supports S0 S1 S3 S4 S5)
[    0.110830] ACPI: Using IOAPIC for interrupt routing
[    0.110856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.116730] ACPI: Power Resource [FN00] (off)
[    0.117372] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.117378] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.117414] \_SB_.PCI0:_OSC invalid UUID
[    0.117415] _OSC request data:1 1f 0 
[    0.117418] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.117900] PCI host bridge to bus 0000:00
[    0.117903] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.117905] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.117907] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.117908] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.117910] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.117912] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.117920] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.118017] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.118051] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.118094] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.118141] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.118154] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.118160] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.118165] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.118304] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.118337] pci 0000:00:16.0: reg 0x10: [mem 0xf1605000-0xf160500f 64bit]
[    0.118404] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.118495] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.118525] pci 0000:00:1a.0: reg 0x10: [mem 0xf1609000-0xf16093ff]
[    0.118601] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.118658] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.118707] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.118735] pci 0000:00:1b.0: reg 0x10: [mem 0xf1600000-0xf1603fff 64bit]
[    0.118800] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.118847] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.118896] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.118975] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.119022] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.119069] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.119147] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.119217] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.119271] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.119300] pci 0000:00:1d.0: reg 0x10: [mem 0xf1608000-0xf16083ff]
[    0.119377] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.119433] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.119481] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.119659] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.119681] pci 0000:00:1f.2: reg 0x10: [io  0x40b8-0x40bf]
[    0.119689] pci 0000:00:1f.2: reg 0x14: [io  0x40cc-0x40cf]
[    0.119698] pci 0000:00:1f.2: reg 0x18: [io  0x40b0-0x40b7]
[    0.119706] pci 0000:00:1f.2: reg 0x1c: [io  0x40c8-0x40cb]
[    0.119714] pci 0000:00:1f.2: reg 0x20: [io  0x4090-0x409f]
[    0.119722] pci 0000:00:1f.2: reg 0x24: [io  0x4080-0x408f]
[    0.119820] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.119838] pci 0000:00:1f.3: reg 0x10: [mem 0xf1604000-0xf16040ff 64bit]
[    0.119859] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.119955] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.119976] pci 0000:00:1f.5: reg 0x10: [io  0x40a8-0x40af]
[    0.119985] pci 0000:00:1f.5: reg 0x14: [io  0x40c4-0x40c7]
[    0.119993] pci 0000:00:1f.5: reg 0x18: [io  0x40a0-0x40a7]
[    0.120001] pci 0000:00:1f.5: reg 0x1c: [io  0x40c0-0x40c3]
[    0.120009] pci 0000:00:1f.5: reg 0x20: [io  0x4070-0x407f]
[    0.120017] pci 0000:00:1f.5: reg 0x24: [io  0x4060-0x406f]
[    0.120169] pci 0000:01:00.0: [10de:1054] type 00 class 0x030000
[    0.120189] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.120199] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.120209] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.120215] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.120222] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.120291] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.128104] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.128112] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.128118] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.128127] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.128270] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.128322] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf150ffff 64bit]
[    0.128456] pci 0000:02:00.0: supports D1
[    0.128458] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.128505] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.136112] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.136126] pci 0000:00:1c.0:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.136278] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.136327] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.136361] pci 0000:03:00.0: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[    0.136383] pci 0000:03:00.0: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[    0.136470] pci 0000:03:00.0: supports D1 D2
[    0.136472] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144121] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.144131] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.144149] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.144721] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.144778] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.144834] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.144890] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.144944] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.144998] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.145053] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.145107] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.145362] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.145400] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.145521] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.145524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.145528] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.145529] vgaarb: loaded
[    0.145530] vgaarb: bridge control possible 0000:01:00.0
[    0.145531] vgaarb: no bridge control possible 0000:00:02.0
[    0.145645] PCI: Using ACPI for IRQ routing
[    0.147231] PCI: pci_cache_line_size set to 64 bytes
[    0.147281] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.147283] e820: reserve RAM buffer [mem 0xbab0f000-0xbbffffff]
[    0.147285] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.147286] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[    0.147455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.147460] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.149492] clocksource: Switched to clocksource hpet
[    0.155451] pnp: PnP ACPI init
[    0.155603] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.155606] system 00:00: [io  0x1000-0x1003] has been reserved
[    0.155608] system 00:00: [io  0x1004-0x1013] has been reserved
[    0.155610] system 00:00: [io  0xffff] has been reserved
[    0.155612] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.155614] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.155616] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.155617] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.155622] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.155653] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.155709] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.155712] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.155763] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.155808] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.155957] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.155959] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.155961] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.155963] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.155965] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.155967] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.155968] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.155970] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.155972] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.155974] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.155976] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156227] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.156229] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.156231] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156254] pnp: PnP ACPI: found 7 devices
[    0.162807] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.162816] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.162844] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.162846] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.162848] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.162851] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.162854] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf0ffffff]
[    0.162856] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.162860] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.162865] pci 0000:00:1c.0:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.162874] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.162877] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.162884] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.162892] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.162894] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.162895] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.162897] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.162899] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.162901] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.162902] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
[    0.162904] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.162906] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.162908] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.162909] pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
[    0.162961] NET: Registered protocol family 2
[    0.163130] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.163218] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.163289] TCP: Hash tables configured (established 32768 bind 32768)
[    0.163321] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.163338] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.163425] NET: Registered protocol family 1
[    0.163443] pci 0000:00:02.0: Video device with shadowed ROM
[    0.163535] PCI: CLS 64 bytes, default 64
[    0.163592] Unpacking initramfs...
[    0.754023] Freeing initrd memory: 33516K (ffff880033e7a000 - ffff880035f35000)
[    0.754057] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.754059] software IO TLB [mem 0xb6b0f000-0xbab0f000] (64MB) mapped at [ffff8800b6b0f000-ffff8800bab0efff]
[    0.754123] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.754124] hw unit of domain pp0-core 2^-16 Joules
[    0.754125] hw unit of domain package 2^-16 Joules
[    0.754126] hw unit of domain pp1-gpu 2^-16 Joules
[    0.754576] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.754614] audit: initializing netlink subsys (disabled)
[    0.754632] audit: type=2000 audit(1475001937.756:1): initialized
[    0.755104] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.755127] zbud: loaded
[    0.755267] VFS: Disk quotas dquot_6.6.0
[    0.755286] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.755775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.755806] io scheduler noop registered
[    0.755809] io scheduler deadline registered
[    0.755821] io scheduler cfq registered (default)
[    0.756317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.756325] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.756346] intel_idle: MWAIT substates: 0x21120
[    0.756347] intel_idle: v0.4 model 0x2A
[    0.756349] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.756474] GHES: HEST is not enabled!
[    0.756555] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.756991] Linux agpgart interface v0.103
[    0.757044] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.757045] AMD IOMMUv2 functionality not available on this system
[    0.757279] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.761970] i8042: Detected active multiplexing controller, rev 1.1
[    0.763619] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.763623] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.763658] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.763687] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.763715] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.763906] mousedev: PS/2 mouse device common for all mice
[    0.763956] rtc_cmos 00:01: RTC can wake from S4
[    0.764124] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.764150] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.764165] Intel P-state driver initializing.
[    0.764456] ledtrig-cpu: registered to indicate activity on CPUs
[    0.765334] NET: Registered protocol family 10
[    0.765874] mip6: Mobile IPv6
[    0.765887] NET: Registered protocol family 17
[    0.765906] mpls_gso: MPLS GSO support
[    0.766318] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.766375] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.766540] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.767130] registered taskstats version 1
[    0.767210] zswap: loaded using pool lzo/zbud
[    0.768324] rtc_cmos 00:01: setting system clock to 2016-09-27 18:45:38 UTC (1475001938)
[    0.768569] PM: Hibernation image not present or could not be loaded.
[    0.771660] Freeing unused kernel memory: 1308K (ffffffff81b0c000 - ffffffff81c53000)
[    0.771664] Write protecting the kernel read-only data: 10240k
[    0.772237] Freeing unused kernel memory: 420K (ffff880001597000 - ffff880001600000)
[    0.779508] Freeing unused kernel memory: 1240K (ffff8800018ca000 - ffff880001a00000)
[    0.797633] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.797761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.822690] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.871828] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    0.871887] ACPI: Lid Switch [LID0]
[    0.871968] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    0.871972] ACPI: Power Button [PWRB]
[    0.872050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    0.872054] ACPI: Power Button [PWRF]
[    0.872243] ACPI Error: [ECPU] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.872251] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88013b09fc20), AE_NOT_FOUND (20150930/psparse-542)
[    0.872262] [drm] Initialized drm 1.1.0 20060810
[    0.872290] ACPI: Invalid passive threshold
[    0.872319] ACPI Error: [ECPU] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.872323] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88013b09fc20), AE_NOT_FOUND (20150930/psparse-542)
[    0.874590] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.875024] wmi: Mapper loaded
[    0.880968] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.881159] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.881316] pci 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    0.881342] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.881490] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    0.882652] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    0.882660] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    0.882733] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    0.882775] nouveau 0000:01:00.0: NVIDIA GF119 (0d9140a1)
[    0.895840] ACPI: bus type USB registered
[    0.895876] usbcore: registered new interface driver usbfs
[    0.895890] usbcore: registered new interface driver hub
[    0.895925] usbcore: registered new device driver usb
[    0.896432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.896614] ehci-pci: EHCI PCI platform driver
[    0.899425] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.899439] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.900032] [drm] Memory usable by graphics device = 2048M
[    0.900036] [drm] Replacing VGA console driver
[    0.900633] Console: switching to colour dummy device 80x25
[    0.901855] SCSI subsystem initialized
[    0.901877] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000076a000, 8c:73:6e:b8:cf:d3, XID 0c900800 IRQ 26
[    0.901881] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.910163] libata version 3.00 loaded.
[    0.917196] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.917200] [drm] Driver supports precise vblank timestamp query.
[    0.917548] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    0.937229] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.951849] nouveau 0000:01:00.0: bios: version 75.19.13.00.06
[    1.075229] fbcon: inteldrmfb (fb0) is primary device
[    2.744829] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.744835] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.893965] Console: switching to colour frame buffer device 170x48
[    2.894329] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150930/video-1216)
[    2.894332] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    2.894638] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input10
[    2.900314] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.902104] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.379330] ACPI Error: Method parse/execution failed [\_SB.PCI0.GFX0.DD02._BCM] (Node ffff88013b0a7590), AE_AML_INFINITE_LOOP (20150930/psparse-542)
[    3.379339] ACPI Error: Evaluating _BCM failed (20150930/video-367)
[    3.379848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    3.380030] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    3.400730] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.400738] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.400752] ehci-pci 0000:00:1a.0: debug port 2
[    3.404656] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.404671] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1609000
[    3.494051] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.494102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.494104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.494106] usb usb1: Product: EHCI Host Controller
[    3.494107] usb usb1: Manufacturer: Linux 4.4.0-2-deepin-amd64 ehci_hcd
[    3.494108] usb usb1: SerialNumber: 0000:00:1a.0
[    3.494341] hub 1-0:1.0: USB hub found
[    3.494435] hub 1-0:1.0: 2 ports detected
[    3.494651] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.494656] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.494669] ehci-pci 0000:00:1d.0: debug port 2
[    3.498590] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.498606] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1608000
[    3.509853] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.509889] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.509891] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.509893] usb usb2: Product: EHCI Host Controller
[    3.509894] usb usb2: Manufacturer: Linux 4.4.0-2-deepin-amd64 ehci_hcd
[    3.509896] usb usb2: SerialNumber: 0000:00:1d.0
[    3.510117] hub 2-0:1.0: USB hub found
[    3.510211] hub 2-0:1.0: 2 ports detected
[    4.015806] ata_piix 0000:00:1f.2: version 2.13
[    4.015820] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    4.016741] clocksource: Switched to clocksource tsc
[    4.127582] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    4.186774] scsi host0: ata_piix
[    4.186852] scsi host1: ata_piix
[    4.186902] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
[    4.186907] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
[    4.187001] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    4.187032] vga_switcheroo: enabled
[    4.187101] [TTM] Zone  kernel: Available graphics memory: 1980464 kiB
[    4.187102] [TTM] Initializing pool allocator
[    4.187108] [TTM] Initializing DMA pool allocator
[    4.187118] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    4.187120] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    4.187123] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    4.187125] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    4.187127] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    4.187129] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    4.189575] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.189576] [drm] Driver supports precise vblank timestamp query.
[    4.241675] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.241713] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.341682] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    4.343036] scsi host2: ata_piix
[    4.343484] scsi host3: ata_piix
[    4.343613] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
[    4.343618] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
[    4.473108] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    4.526370] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff88003590f000
[    4.526699] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    4.526711] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    4.602504] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.602514] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.602649] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.602654] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.602958] hub 1-1:1.0: USB hub found
[    4.603116] hub 2-1:1.0: USB hub found
[    4.603131] hub 1-1:1.0: 6 ports detected
[    4.603682] hub 2-1:1.0: 6 ports detected
[    4.873749] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    4.877722] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    4.979298] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[    4.979308] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.979312] usb 2-1.6: Product: USB2.0-CRW
[    4.979316] usb 2-1.6: Manufacturer: Generic
[    4.979320] usb 2-1.6: SerialNumber: 20090516388200000
[    4.989595] usbcore: registered new interface driver usb-storage
[    4.990231] usbcore: registered new interface driver uas
[    4.990774] ums-realtek 2-1.6:1.0: USB Mass Storage device detected
[    5.004241] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=b213
[    5.004249] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    5.004254] usb 1-1.2: Product: FJ Camera
[    5.004257] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
[    5.004261] usb 1-1.2: SerialNumber: SN0001
[    5.010347] scsi host4: usb-storage 2-1.6:1.0
[    5.010529] usbcore: registered new interface driver ums-realtek
[    5.077710] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    5.265699] ata2.00: failed to resume link (SControl 0)
[    5.553477] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.553502] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.077655] ata1.00: ATA-8: WDC WD3200BPVT-16JJ5T0, 01.01A01, max UDMA/133
[    6.077663] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    6.077715] ata1.01: ATAPI: TSSTcorp CDDVDW SN-208AB, FC01, max UDMA/100
[    6.237311] usb 2-1.6: USB disconnect, device number 3
[    6.250455] ata1.00: configured for UDMA/133
[    6.266084] ata1.01: configured for UDMA/100
[    6.267138] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-1 1A01 PQ: 0 ANSI: 5
[    6.272087] scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  FC01 PQ: 0 ANSI: 5
[    6.309785] usb 1-1.5: device descriptor read/64, error -32
[    6.441799] ata2.01: failed to resume link (SControl 0)
[    6.453468] ata2.00: SATA link down (SStatus 4 SControl 0)
[    6.453490] ata2.01: SATA link down (SStatus 4 SControl 0)
[    6.457535] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    6.457544] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    6.457632] sd 0:0:0:0: [sda] Write Protect is off
[    6.457638] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.457674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.499851] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.499861] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.500218] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    6.507185] usb 1-1.5: New USB device found, idVendor=1690, idProduct=0754
[    6.507195] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.566433]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[    6.584606] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.502073] psmouse serio2: Failed to deactivate mouse on isa0060/serio2
[   10.746232] psmouse serio2: Failed to enable mouse on isa0060/serio2
[   11.370251] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   11.370642] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   11.370656] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   11.370958] nouveau 0000:01:00.0: DRM: suspending console...
[   11.370966] nouveau 0000:01:00.0: DRM: suspending display...
[   11.370988] nouveau 0000:01:00.0: DRM: evicting buffers...
[   11.370993] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   11.371062] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   11.371248] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   11.586246] random: nonblocking pool is initialized
[   11.843325] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
[   12.378972] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   12.592317] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   12.592330] nouveau 0000:01:00.0: DRM: resuming display...
[   12.592367] nouveau 0000:01:00.0: DRM: resuming console...
[   14.030757] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   15.661366] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[   16.204281] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   16.204536] systemd[1]: Detected architecture x86-64.
[   16.204943] systemd[1]: Set hostname to <EaseLife>.
[   18.525162] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   18.525335] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   18.525403] systemd[1]: Listening on LVM2 poll daemon socket.
[   18.525424] systemd[1]: Reached target Encrypted Volumes.
[   18.525474] systemd[1]: Listening on udev Kernel Socket.
[   18.525511] systemd[1]: Listening on fsck to fsckd communication Socket.
[   18.525567] systemd[1]: Listening on udev Control Socket.
[   18.525613] systemd[1]: Listening on Syslog Socket.
[   18.525876] systemd[1]: Created slice System Slice.
[   18.526125] systemd[1]: Created slice system-getty.slice.
[   18.526183] systemd[1]: Listening on Journal Socket (/dev/log).
[   18.526206] systemd[1]: Reached target Swap.
[   18.526440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   18.526518] systemd[1]: Listening on Journal Socket.
[   18.542338] systemd[1]: Mounting POSIX Message Queue File System...
[   18.543252] systemd[1]: Mounting Huge Pages File System...
[   18.630332] systemd[1]: Starting Load Kernel Modules...
[   18.631301] systemd[1]: Mounting Debug File System...
[   18.631385] systemd[1]: Reached target User and Group Name Lookups.
[   18.631648] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   18.850355] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   18.850525] systemd[1]: Listening on Journal Audit Socket.
[   18.851433] systemd[1]: Starting Journal Service...
[   18.926398] systemd[1]: Starting Set Up Additional Binary Formats...
[   18.926434] systemd[1]: Reached target Remote File Systems (Pre).
[   18.926518] systemd[1]: Listening on LVM2 metadata daemon socket.
[   18.927276] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   18.927362] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   18.927419] systemd[1]: Reached target Remote File Systems.
[   18.927617] systemd[1]: Created slice User and Session Slice.
[   18.927644] systemd[1]: Reached target Slices.
[   18.929749] systemd[1]: Mounted Huge Pages File System.
[   18.929858] systemd[1]: Mounted POSIX Message Queue File System.
[   18.929930] systemd[1]: Mounted Debug File System.
[   19.008144] lp: driver loaded but no devices found
[   19.093605] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 201 (systemd-binfmt)
[   19.110331] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[   19.110658] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   19.112893] systemd[1]: Starting Create Static Device Nodes in /dev...
[   19.216118] ppdev: user-space parallel port driver
[   19.239865] systemd[1]: Started Load Kernel Modules.
[   19.258369] systemd[1]: Starting Apply Kernel Variables...
[   19.360080] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[   19.420046] systemd[1]: Started Apply Kernel Variables.
[   19.738329] systemd[1]: Started LVM2 metadata daemon.
[   19.747361] systemd[1]: Started Journal Service.
[   21.034226] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[   21.266268] systemd-journald[193]: Received request to flush runtime journal from PID 1
[   22.231073] ACPI: AC Adapter [ADP1] (on-line)
[   22.281467] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/FUJ02B1:00/input/input14
[   22.281575] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[   22.282122] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input15
[   22.282270] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[   22.282641] fujitsu_laptop: BTNI: [0x80001]
[   22.282763] fujitsu_laptop: driver 0.6.0 successfully loaded
[   22.524191] ACPI: Battery Slot [BAT0] (battery present)
[   22.722235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.004235] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   23.004247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.004253] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   23.004260] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   23.004265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.004267] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   23.004272] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   23.004277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.004279] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   23.004283] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   23.004288] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.004290] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   23.222949] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.222992] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   23.568174] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[   23.568188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.038933] input: PC Speaker as /devices/platform/pcspkr/input/input16
[   24.837219] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x90970130
[   24.837837] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   24.837841] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   24.837845] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   24.837848] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   24.837850] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   24.837854] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   24.837857] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   25.569634] Bluetooth: Core ver 2.21
[   25.570647] NET: Registered protocol family 31
[   25.570651] Bluetooth: HCI device and connection manager initialized
[   25.570659] Bluetooth: HCI socket layer initialized
[   25.570664] Bluetooth: L2CAP socket layer initialized
[   25.570684] Bluetooth: SCO socket layer initialized
[   25.769430] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   25.769941] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   25.770059] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   25.770172] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   26.204668] usbcore: registered new interface driver btusb
[   26.642433] media: Linux media interface: v0.10
[   26.732837] Linux video capture interface: v2.00
[   26.981933] iTCO_vendor_support: vendor-support=0
[   27.002352] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   27.002415] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   27.002578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   27.402648] intel_rapl: Found RAPL domain package
[   27.402656] intel_rapl: Found RAPL domain core
[   27.402659] intel_rapl: Found RAPL domain uncore
[   27.673266] ath: phy0: ASPM enabled: 0x42
[   27.673272] ath: EEPROM regdomain: 0x6a
[   27.673274] ath: EEPROM indicates we should expect a direct regpair map
[   27.673277] ath: Country alpha2 being used: 00
[   27.673279] ath: Regpair used: 0x6a
[   27.726355] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   27.726881] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000ee0000, irq=16
[   28.438331] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   28.466586] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
[   28.480409] input: FJ Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input21
[   28.480630] usbcore: registered new interface driver uvcvideo
[   28.480634] USB Video Class driver (1.1.1)
[   29.345015] cfg80211: World regulatory domain updated:
[   29.345022] cfg80211:  DFS Master region: unset
[   29.345025] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   29.345030] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   29.345034] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   29.345037] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   29.345041] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   29.345045] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   29.345048] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   29.345051] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   29.345054] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   33.161263] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[   74.233702] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   74.313936] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   74.425859] r8169 0000:03:00.0 enp3s0: link down
[   74.425921] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   74.428191] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   74.443052] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   74.660476] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   75.550389] wlp2s0: authenticate with 46:27:1e:8c:4f:eb
[   75.563586] wlp2s0: send auth to 46:27:1e:8c:4f:eb (try 1/3)
[   75.565959] wlp2s0: authenticated
[   75.567785] wlp2s0: associate with 46:27:1e:8c:4f:eb (try 1/3)
[   75.576125] wlp2s0: RX AssocResp from 46:27:1e:8c:4f:eb (capab=0x431 status=0 aid=4)
[   75.576203] wlp2s0: associated
[   75.576239] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   75.579413] ath: EEPROM regdomain: 0x809c
[   75.579416] ath: EEPROM indicates we should expect a country code
[   75.579417] ath: doing EEPROM country->regdmn map search
[   75.579418] ath: country maps to regdmn code: 0x52
[   75.579420] ath: Country alpha2 being used: CN
[   75.579421] ath: Regpair used: 0x52
[   75.579422] ath: regdomain 0x809c dynamically updated by country IE
[   75.579449] cfg80211: Regulatory domain changed to country: CN
[   75.579450] cfg80211:  DFS Master region: FCC
[   75.579451] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   75.579453] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   75.579455] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   75.579457] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   75.579459] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   75.579460] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   75.579461] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[   75.579463] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   91.501747] fuse init (API version 7.23)
[   97.995687] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   97.995693] Bluetooth: BNEP filters: protocol multicast
[   97.995701] Bluetooth: BNEP socket layer initialized
[   98.581492] Bluetooth: RFCOMM TTY layer initialized
[   98.581510] Bluetooth: RFCOMM socket layer initialized
[   98.581522] Bluetooth: RFCOMM ver 1.11
