[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-2-deepin-686-pae (yangbo@deepin.com) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Deepin 4.4.6-4 (2016-07-01)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e08bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e08c000-0x000000007e28cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007e28d000-0x000000007eebdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007eebe000-0x000000007eeeefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eeef000-0x000000007eefffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ef00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Apple Inc. MacBook2,1/Mac-F4208CAA, BIOS     MB21.88Z.00A5.B07.0706270922 06/27/07
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7e08c max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07F000000 mask FFF000000 uncachable
[    0.000000]   3 base 07EF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x018a7000, 0x018a7fff] PGTABLE
[    0.000000] BRK [0x018a8000, 0x018a9fff] PGTABLE
[    0.000000] BRK [0x018aa000, 0x018aafff] PGTABLE
[    0.000000] BRK [0x018ab000, 0x018abfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x335e2000-0x35ae8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE )
[    0.000000] ACPI: XSDT 0x000000007EEFD1C0 000074 (v01 APPLE  Apple00  000000A5      01000013)
[    0.000000] ACPI: FACP 0x000000007EEFB000 0000F4 (v03 APPLE  Apple00  000000A5 Loki 0000005F)
[    0.000000] ACPI: DSDT 0x000000007EEF0000 0041E4 (v01 APPLE  MacBook  00020001 INTL 20050309)
[    0.000000] ACPI: FACS 0x000000007EEC0000 000040
[    0.000000] ACPI: FACS 0x000000007EEC0000 000040
[    0.000000] ACPI: HPET 0x000000007EEFA000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 0x000000007EEF9000 000068 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: MCFG 0x000000007EEF8000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 0x000000007EEF7000 0000A0 (v32 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 0x000000007EEF6000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 0x000000007EEF5000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 0x000000007EEEF000 0004DC (v01 APPLE  CpuPm    00003000 INTL 20050309)
[    0.000000] ACPI: SSDT 0x000000007EEBD000 00064F (v01 SataRe SataPri  00001000 INTL 20050309)
[    0.000000] ACPI: SSDT 0x000000007EEBC000 00069C (v01 SataRe SataSec  00001000 INTL 20050309)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1126MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007e08bfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007e08bfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007e08bfff]
[    0.000000] On node 0 totalpages: 516138
[    0.000000] free_area_init_node: node 0, pgdat c1756b00, node_mem_map f683d024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 288398 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x7f000000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 18 pages/cpu @f680d000 s42892 r0 d30836 u73728
[    0.000000] pcpu-alloc: s42892 r0 d30836 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 514135
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-686-pae root=UUID=2a343ab6-d14e-4739-aab8-75901c54319f ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: CPU0 microcode updated early to revision 0xd1, date = 2010-10-01
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007e08c)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1998524K/2064552K available (5393K kernel code, 610K rwdata, 1588K rodata, 696K init, 476K bss, 66028K reserved, 0K cma-reserved, 1153592K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xc176d000 - 0xc181b000   ( 696 kB)
                     .data : 0xc1544a27 - 0xc176bb80   (2204 kB)
                     .text : 0xc1000000 - 0xc1544a27   (5394 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f602c000 soft=f602e000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 2161.244 MHz processor
[    0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.48 BogoMIPS (lpj=8644976)
[    0.004028] pid_max: default: 32768 minimum: 301
[    0.004046] ACPI: Core revision 20150930
[    0.016831] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.016879] Security Framework initialized
[    0.016885] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016902] AppArmor: AppArmor disabled by boot time parameter
[    0.016929] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016934] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.017469] Initializing cgroup subsys io
[    0.017479] Initializing cgroup subsys memory
[    0.017785] Disabling memory control group subsystem
[    0.017789] Initializing cgroup subsys devices
[    0.017795] Initializing cgroup subsys freezer
[    0.017804] Initializing cgroup subsys net_cls
[    0.017810] Initializing cgroup subsys perf_event
[    0.017817] Initializing cgroup subsys net_prio
[    0.017829] Initializing cgroup subsys pids
[    0.017870] CPU: Physical Processor ID: 0
[    0.017874] CPU: Processor Core ID: 0
[    0.017884] mce: CPU supports 6 MCE banks
[    0.017903] CPU0: Thermal monitoring enabled (TM2)
[    0.017910] process: using mwait in idle threads
[    0.017924] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.017928] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.018352] Freeing SMP alternatives memory: 20K (c181b000 - c1820000)
[    0.022280] ftrace: allocating 22690 entries in 45 pages
[    0.032138] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.076000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] perf_event_intel: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] CPU 1 irqstacks, hard=f6168000 soft=f616a000
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.008000] microcode: CPU1 microcode updated early to revision 0xd1, date = 2010-10-01
[    0.008000] Initializing CPU#1
[    0.076065] x86: Booted up 1 node, 2 CPUs
[    0.076076] smpboot: Total of 2 processors activated (8644.97 BogoMIPS)
[    0.080207] devtmpfs: initialized
[    0.080587] PM: Registering ACPI NVS region [mem 0x7e08c000-0x7e28cfff] (2101248 bytes)
[    0.080587] PM: Registering ACPI NVS region [mem 0x7eebe000-0x7eeeefff] (200704 bytes)
[    0.080587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080587] pinctrl core: initialized pinctrl subsystem
[    0.080587] NET: Registered protocol family 16
[    0.092011] cpuidle: using governor ladder
[    0.104007] cpuidle: using governor menu
[    0.104188] ACPI: bus type PCI registered
[    0.104194] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.104385] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[    0.104393] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[    0.104399] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[    0.104403] PCI: Using MMCONFIG for extended config space
[    0.104406] PCI: Using configuration type 1 for base access
[    0.104668] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.104672] mtrr: probably your BIOS does not setup all CPUs.
[    0.104675] mtrr: corrected configuration.
[    0.120173] ACPI: Added _OSI(Module Device)
[    0.120179] ACPI: Added _OSI(Processor Device)
[    0.120183] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120187] ACPI: Added _OSI(Processor Aggregator Device)
[    0.122054] ACPI : EC: EC description table is found, configuring boot EC
[    0.122077] ACPI : EC: EC started
[    0.128509] ACPI: Dynamic OEM Table Load:
[    0.128527] ACPI: SSDT 0x00000000F6163400 0002AE (v01 APPLE  Cpu0Ist  00003000 INTL 20050309)
[    0.129287] ACPI: Dynamic OEM Table Load:
[    0.129303] ACPI: SSDT 0x00000000F6163000 0002A0 (v01 APPLE  Cpu0Cst  00003001 INTL 20050309)
[    0.130510] ACPI: Dynamic OEM Table Load:
[    0.130525] ACPI: SSDT 0x00000000F614A100 000087 (v01 APPLE  Cpu1Ist  00003000 INTL 20050309)
[    0.131192] ACPI: Dynamic OEM Table Load:
[    0.131206] ACPI: SSDT 0x00000000F614A040 000085 (v01 APPLE  Cpu1Cst  00003000 INTL 20050309)
[    0.132141] ACPI: Interpreter enabled
[    0.132170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.132181] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.132215] ACPI: (supports S0 S3 S4 S5)
[    0.132220] ACPI: Using IOAPIC for interrupt routing
[    0.132286] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.146180] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.146194] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[    0.146204] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.147311] PCI host bridge to bus 0000:00
[    0.147320] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.147326] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.147332] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.147337] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.147343] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.147364] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.147610] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.147643] pci 0000:00:02.0: reg 0x10: [mem 0x90380000-0x903fffff]
[    0.147656] pci 0000:00:02.0: reg 0x14: [io  0x20e0-0x20e7]
[    0.147669] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.147682] pci 0000:00:02.0: reg 0x1c: [mem 0x90400000-0x9043ffff]
[    0.147921] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.147947] pci 0000:00:02.1: reg 0x10: [mem 0x90300000-0x9037ffff]
[    0.148211] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
[    0.148238] pci 0000:00:07.0: reg 0x10: [mem 0x90444000-0x90444fff]
[    0.148529] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.148587] pci 0000:00:1b.0: reg 0x10: [mem 0x90440000-0x90443fff 64bit]
[    0.148719] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.148946] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.149101] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.149334] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.149492] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.149728] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.149808] pci 0000:00:1d.0: reg 0x20: [io  0x2080-0x209f]
[    0.149980] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.150110] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.150191] pci 0000:00:1d.1: reg 0x20: [io  0x2060-0x207f]
[    0.150361] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.150491] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.150572] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
[    0.150738] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.150868] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.150949] pci 0000:00:1d.3: reg 0x20: [io  0x2020-0x203f]
[    0.151116] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.151257] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.151304] pci 0000:00:1d.7: reg 0x10: [mem 0x90445400-0x904457ff]
[    0.151431] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.151528] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.151662] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.151951] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.152123] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
[    0.152135] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.152143] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[    0.152151] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.152163] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[    0.152379] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.152409] pci 0000:00:1f.1: reg 0x10: [io  0x20d8-0x20df]
[    0.152428] pci 0000:00:1f.1: reg 0x14: [io  0x20f4-0x20f7]
[    0.152446] pci 0000:00:1f.1: reg 0x18: [io  0x20d0-0x20d7]
[    0.152464] pci 0000:00:1f.1: reg 0x1c: [io  0x20f0-0x20f3]
[    0.152482] pci 0000:00:1f.1: reg 0x20: [io  0x20b0-0x20bf]
[    0.152519] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.152524] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.152529] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.152534] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.152735] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f
[    0.152776] pci 0000:00:1f.2: reg 0x10: [io  0x20c8-0x20cf]
[    0.152795] pci 0000:00:1f.2: reg 0x14: [io  0x20ec-0x20ef]
[    0.152812] pci 0000:00:1f.2: reg 0x18: [io  0x20c0-0x20c7]
[    0.152830] pci 0000:00:1f.2: reg 0x1c: [io  0x20e8-0x20eb]
[    0.152848] pci 0000:00:1f.2: reg 0x20: [io  0x20a0-0x20af]
[    0.152867] pci 0000:00:1f.2: reg 0x24: [mem 0x90445000-0x904453ff]
[    0.152925] pci 0000:00:1f.2: PME# supported from D3hot
[    0.153138] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.153237] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.153636] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
[    0.153717] pci 0000:01:00.0: reg 0x10: [mem 0x90200000-0x90203fff 64bit]
[    0.153740] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x10ff]
[    0.153815] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.153904] pci 0000:01:00.0: supports D1 D2
[    0.153910] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.153977] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.154094] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.154115] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.154124] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.154133] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x902fffff]
[    0.154334] pci 0000:02:00.0: [168c:0024] type 00 class 0x028000
[    0.154417] pci 0000:02:00.0: reg 0x10: [mem 0x90100000-0x9010ffff 64bit]
[    0.154603] pci 0000:02:00.0: supports D1
[    0.154609] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.154684] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.154805] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.154824] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.154838] pci 0000:00:1c.1:   bridge window [mem 0x90100000-0x901fffff]
[    0.154986] pci 0000:03:03.0: [11c1:5811] type 00 class 0x0c0010
[    0.155030] pci 0000:03:03.0: reg 0x10: [mem 0x90000000-0x90000fff]
[    0.155160] pci 0000:03:03.0: supports D1 D2
[    0.155165] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[    0.155384] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.155398] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.155412] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.155417] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.155423] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.155429] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.155463] pci_bus 0000:00: on NUMA node 0
[    0.155761] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.155926] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.156094] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.156250] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.156403] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.156558] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.156713] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.156867] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.157962] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.158040] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.158257] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.158257] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.158257] vgaarb: loaded
[    0.158257] vgaarb: bridge control possible 0000:00:02.0
[    0.158257] PCI: Using ACPI for IRQ routing
[    0.161776] PCI: pci_cache_line_size set to 64 bytes
[    0.161875] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.161881] e820: reserve RAM buffer [mem 0x7e08c000-0x7fffffff]
[    0.162335] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.162345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.162355] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.164048] clocksource: Switched to clocksource hpet
[    0.184055] pnp: PnP ACPI init
[    0.184308] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.184323] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.184330] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.184336] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.184343] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.184349] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.184360] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185133] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.185144] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.185234] pnp 00:02: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io  0x1000-0x1fff]
[    0.185354] system 00:02: [io  0x0680-0x06ef] has been reserved
[    0.185361] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.185367] system 00:02: [io  0x0810-0x0817] has been reserved
[    0.185374] system 00:02: [io  0x0400-0x047f] could not be reserved
[    0.185380] system 00:02: [io  0x0500-0x053f] has been reserved
[    0.185389] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185475] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.185587] pnp: PnP ACPI: found 4 devices
[    0.185598] PnPBIOS: Disabled by ACPI PNP
[    0.226535] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.226552] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.226581] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.226601] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.226610] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.226637] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.226646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.226653] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.226660] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.226667] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.226673] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.226680] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.226695] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90500000-0x906fffff 64bit pref]
[    0.226707] pci 0000:00:1c.1: BAR 15: assigned [mem 0x90700000-0x908fffff 64bit pref]
[    0.226716] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.226726] pci 0000:01:00.0: BAR 6: assigned [mem 0x90220000-0x9023ffff pref]
[    0.226732] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.226740] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.226751] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x902fffff]
[    0.226760] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x906fffff 64bit pref]
[    0.226773] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.226780] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.226790] pci 0000:00:1c.1:   bridge window [mem 0x90100000-0x901fffff]
[    0.226799] pci 0000:00:1c.1:   bridge window [mem 0x90700000-0x908fffff 64bit pref]
[    0.226813] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.226824] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.226843] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.226848] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.226854] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.226859] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.226865] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.226870] pci_bus 0000:01: resource 1 [mem 0x90200000-0x902fffff]
[    0.226876] pci_bus 0000:01: resource 2 [mem 0x90500000-0x906fffff 64bit pref]
[    0.226881] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.226886] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]
[    0.226892] pci_bus 0000:02: resource 2 [mem 0x90700000-0x908fffff 64bit pref]
[    0.226898] pci_bus 0000:03: resource 1 [mem 0x90000000-0x900fffff]
[    0.226903] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.226908] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.226914] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.226919] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.227021] NET: Registered protocol family 2
[    0.227416] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.227446] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.227489] TCP: Hash tables configured (established 8192 bind 8192)
[    0.227533] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.227547] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.227648] NET: Registered protocol family 1
[    0.227685] pci 0000:00:02.0: Video device with shadowed ROM
[    0.227926] PCI: CLS mismatch (256 != 64), using 64 bytes
[    0.228056] Unpacking initramfs...
[    1.811525] Freeing initrd memory: 37916K (f35e2000 - f5ae9000)
[    1.812053] efifb: dmi detected MacBook2,1 - framebuffer at 0x80000000 (1280x800, stride 8192)
[    1.812785] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.812872] audit: initializing netlink subsys (disabled)
[    1.812912] audit: type=2000 audit(1473862921.812:1): initialized
[    1.813858] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.813901] zbud: loaded
[    1.814032] VFS: Disk quotas dquot_6.6.0
[    1.814076] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.815313] bounce: pool size: 64 pages
[    1.815348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.815428] io scheduler noop registered
[    1.815436] io scheduler deadline registered
[    1.815478] io scheduler cfq registered (default)
[    1.817324] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.817360] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.817462] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    1.817488] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.817571] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    1.817589] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.817645] intel_idle: does not run on family 6 model 15
[    1.817716] GHES: HEST is not enabled!
[    1.817842] isapnp: Scanning for PnP cards...
[    1.817920] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.819092] Linux agpgart interface v0.103
[    1.819376] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.819409] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.821347] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[    1.821574] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    1.822376] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.173364] isapnp: No Plug & Play device found
[    2.849947] i8042: No controller found
[    2.849961] tsc: Refined TSC clocksource calibration: 2161.249 MHz
[    2.849969] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f273431ab8, max_idle_ns: 440795260754 ns
[    2.850192] mousedev: PS/2 mouse device common for all mice
[    2.850302] rtc_cmos 00:03: RTC can wake from S4
[    2.850564] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.850612] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.850642] ledtrig-cpu: registered to indicate activity on CPUs
[    2.851672] NET: Registered protocol family 10
[    2.852245] mip6: Mobile IPv6
[    2.852255] NET: Registered protocol family 17
[    2.852268] mpls_gso: MPLS GSO support
[    2.852758] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xd1
[    2.852779] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xd1
[    2.852878] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.852904] Using IPI No-Shortcut mode
[    2.853308] registered taskstats version 1
[    2.853369] zswap: loaded using pool lzo/zbud
[    2.854094] rtc_cmos 00:03: setting system clock to 2016-09-14 14:22:03 UTC (1473862923)
[    2.854296] PM: Hibernation image not present or could not be loaded.
[    2.854736] Freeing unused kernel memory: 696K (c176d000 - c181b000)
[    2.854875] Write protecting the kernel text: 5396k
[    2.854990] Write protecting the kernel read-only data: 1592k
[    2.854993] NX-protecting the kernel data: 4844k
[    2.855467] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.886565] random: systemd-udevd urandom read with 2 bits of entropy available
[    2.957456] [drm] Initialized drm 1.1.0 20060810
[    2.957683] sky2: driver version 1.30
[    2.957997] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
[    2.958803] sky2 0000:01:00.0 eth0: addr 00:19:e3:43:2a:ce
[    2.963475] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.963547] ACPI: Lid Switch [LID0]
[    2.963706] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.963715] ACPI: Power Button [PWRB]
[    2.963864] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.963871] ACPI: Sleep Button [SLPB]
[    2.964395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.964404] ACPI: Power Button [PWRF]
[    2.965409] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.965745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.990678] ACPI: bus type USB registered
[    2.990770] usbcore: registered new interface driver usbfs
[    2.990809] usbcore: registered new interface driver hub
[    2.991544] usbcore: registered new device driver usb
[    2.992807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.993580] uhci_hcd: USB Universal Host Controller Interface driver
[    2.993995] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.994014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.994031] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.994083] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[    2.994208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.994214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.994220] usb usb1: Product: UHCI Host Controller
[    2.994225] usb usb1: Manufacturer: Linux 4.4.0-2-deepin-686-pae uhci_hcd
[    2.994230] usb usb1: SerialNumber: 0000:00:1d.0
[    2.994835] ehci-pci: EHCI PCI platform driver
[    3.001146] hub 1-0:1.0: USB hub found
[    3.001168] hub 1-0:1.0: 2 ports detected
[    3.001859] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.001877] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.001892] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.001942] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[    3.002064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.002070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.002075] usb usb2: Product: UHCI Host Controller
[    3.002080] usb usb2: Manufacturer: Linux 4.4.0-2-deepin-686-pae uhci_hcd
[    3.002085] usb usb2: SerialNumber: 0000:00:1d.1
[    3.003792] hub 2-0:1.0: USB hub found
[    3.003819] hub 2-0:1.0: 2 ports detected
[    3.004535] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.004554] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.004568] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.004618] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    3.004746] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.004752] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.004757] usb usb3: Product: UHCI Host Controller
[    3.004762] usb usb3: Manufacturer: Linux 4.4.0-2-deepin-686-pae uhci_hcd
[    3.004767] usb usb3: SerialNumber: 0000:00:1d.2
[    3.005347] hub 3-0:1.0: USB hub found
[    3.005366] hub 3-0:1.0: 2 ports detected
[    3.006671] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.006687] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    3.006712] ehci-pci 0000:00:1d.7: debug port 1
[    3.007140] SCSI subsystem initialized
[    3.010635] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    3.010694] ehci-pci 0000:00:1d.7: irq 21, io mem 0x90445400
[    3.012809] libata version 3.00 loaded.
[    3.020052] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.020228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    3.020235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.020241] usb usb4: Product: EHCI Host Controller
[    3.020246] usb usb4: Manufacturer: Linux 4.4.0-2-deepin-686-pae ehci_hcd
[    3.020251] usb usb4: SerialNumber: 0000:00:1d.7
[    3.020849] hub 4-0:1.0: USB hub found
[    3.020873] hub 4-0:1.0: 8 ports detected
[    3.044192] hub 1-0:1.0: USB hub found
[    3.044216] hub 1-0:1.0: 2 ports detected
[    3.055506] sky2 0000:01:00.0 enp1s0: renamed from eth0
[    3.068136] firewire_ohci 0000:03:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    3.068196] hub 2-0:1.0: USB hub found
[    3.068230] hub 2-0:1.0: 2 ports detected
[    3.092177] hub 3-0:1.0: USB hub found
[    3.092203] hub 3-0:1.0: 2 ports detected
[    3.092819] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.092837] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.092854] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.092902] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[    3.093047] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.093055] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.093060] usb usb5: Product: UHCI Host Controller
[    3.093065] usb usb5: Manufacturer: Linux 4.4.0-2-deepin-686-pae uhci_hcd
[    3.093070] usb usb5: SerialNumber: 0000:00:1d.3
[    3.093628] hub 5-0:1.0: USB hub found
[    3.093650] hub 5-0:1.0: 2 ports detected
[    3.098473] [drm] Memory usable by graphics device = 256M
[    3.098480] [drm] Replacing VGA console driver
[    3.099508] Console: switching to colour dummy device 80x25
[    3.101204] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.101210] [drm] Driver supports precise vblank timestamp query.
[    3.101774] [drm] applying backlight present quirk
[    3.101806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.262478] [drm] initialized overlay support
[    3.516033] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.568252] firewire_core 0000:03:03.0: created device fw0: GUID 001cb3fffe8af726, S400
[    3.679195] fbcon: inteldrmfb (fb0) is primary device
[    3.691056] usb 1-1: New USB device found, idVendor=058f, idProduct=9254
[    3.691061] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.691064] usb 1-1: Product: Generic USB Hub
[    3.691067] usb 1-1: Manufacturer: ALCOR
[    3.694177] hub 1-1:1.0: USB hub found
[    3.696053] hub 1-1:1.0: 4 ports detected
[    3.738075] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    3.738720] ata_piix 0000:00:1f.1: version 2.13
[    3.740693] scsi host0: ata_piix
[    3.741089] scsi host1: ata_piix
[    3.741258] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[    3.741261] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[    3.741569] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    3.848112] clocksource: Switched to clocksource tsc
[    3.852028] usb 4-3: new high-speed USB device number 4 using ehci-pci
[    3.906799] scsi host2: ata_piix
[    3.907249] scsi host3: ata_piix
[    3.907410] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
[    3.907413] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
[    3.912401] ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP08, max UDMA/33
[    3.928286] ata1.00: configured for UDMA/33
[    3.940021] usb 1-2: new full-speed USB device number 3 using uhci_hcd
[    3.984997] usb 4-3: New USB device found, idVendor=12d1, idProduct=107e
[    3.985001] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    3.985004] usb 4-3: Product: NEM-TL00H
[    3.985007] usb 4-3: Manufacturer: HUAWEI
[    3.985010] usb 4-3: SerialNumber: 4YUDU16426001467
[    3.989951] usb-storage 4-3:1.1: USB Mass Storage device detected
[    3.990787] scsi host4: usb-storage 4-3:1.1
[    3.991015] usbcore: registered new interface driver usb-storage
[    3.991715] usbcore: registered new interface driver uas
[    4.084333] ata3.01: ATA-9: TS256GSSD370S, N1114H, max UDMA/133
[    4.084337] ata3.01: 500118192 sectors, multi 2: LBA48 NCQ (depth 0/32)
[    4.092568] ata3.01: configured for UDMA/133
[    4.096029] usb 4-4: new high-speed USB device number 5 using ehci-pci
[    4.143053] usb 1-2: New USB device found, idVendor=05ac, idProduct=021a
[    4.143057] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.143061] usb 1-2: Product: Apple Internal Keyboard / Trackpad
[    4.143064] usb 1-2: Manufacturer: Apple Computer
[    4.157958] hidraw: raw HID events driver (C) Jiri Kosina
[    4.160057] usb 1-1.1: new low-speed USB device number 4 using uhci_hcd
[    4.164176] usbcore: registered new interface driver usbhid
[    4.164178] usbhid: USB HID core driver
[    4.166585] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:05AC:021A.0001/input/input5
[    4.220522] apple 0003:05AC:021A.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[    4.222194] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2/0003:05AC:021A.0002/input/input6
[    4.228376] usb 4-4: New USB device found, idVendor=05ac, idProduct=8300
[    4.228381] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.276140] apple 0003:05AC:021A.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[    4.299056] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=0024
[    4.299060] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.299063] usb 1-1.1: Product: HP Basic USB Keyboard
[    4.299066] usb 1-1.1: Manufacturer: CHICONY
[    4.321317] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03F0:0024.0003/input/input7
[    4.376378] hid-generic 0003:03F0:0024.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[    4.392026] usb 1-1.3: new low-speed USB device number 5 using uhci_hcd
[    4.524019] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    4.529060] usb 1-1.3: New USB device found, idVendor=045e, idProduct=077b
[    4.529064] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.529067] usb 1-1.3: Product: Comfort Mouse 3000
[    4.529070] usb 1-1.3: Manufacturer: Microsoft
[    4.602258] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:077B.0004/input/input8
[    4.656247] hid-generic 0003:045E:077B.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:1d.0-1.3/input0
[    4.666887] Console: switching to colour frame buffer device 160x50
[    4.706050] usb 3-2: New USB device found, idVendor=05ac, idProduct=8240
[    4.706054] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.706057] usb 3-2: Product: IR Receiver
[    4.706061] usb 3-2: Manufacturer: Apple Computer, Inc.
[    4.718193] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/0003:05AC:8240.0005/input/input9
[    4.772251] appleir 0003:05AC:8240.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    4.784029] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    4.967052] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
[    4.967056] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.988907] scsi 4:0:0:0: CD-ROM            Linux    File-CD Gadget   0310 PQ: 0 ANSI: 2
[    4.992866] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:05AC:1000.0006/input/input10
[    4.994891] sr 4:0:0:0: [sr0] scsi-1 drive
[    4.994892] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.995281] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    5.048530] hid-generic 0003:05AC:1000.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[    5.065202] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:05AC:1000.0007/input/input11
[    5.065395] hid-generic 0003:05AC:1000.0007: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[    5.073506] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.091254] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP08 PQ: 0 ANSI: 5
[    5.106598] sr 0:0:0:0: [sr1] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    5.106960] sr 0:0:0:0: Attached scsi CD-ROM sr1
[    5.107430] scsi 2:0:1:0: Direct-Access     ATA      TS256GSSD370S    4H   PQ: 0 ANSI: 5
[    5.114246] sd 2:0:1:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    5.114394] sd 2:0:1:0: [sda] Write Protect is off
[    5.114402] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    5.114452] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.117729]  sda: sda1 sda2
[    5.118473] sd 2:0:1:0: [sda] Attached SCSI disk
[    8.112166] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.298964] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.299339] systemd[1]: Detected architecture x86.
[    8.299670] systemd[1]: Set hostname to <junyue-mb>.
[    8.494414] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.494711] systemd[1]: Listening on Journal Audit Socket.
[    8.494808] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.495179] systemd[1]: Created slice System Slice.
[    8.495278] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.495365] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.495399] systemd[1]: Reached target Remote File Systems (Pre).
[    8.495428] systemd[1]: Reached target User and Group Name Lookups.
[    8.495746] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.495816] systemd[1]: Listening on udev Kernel Socket.
[    8.496114] systemd[1]: Created slice User and Session Slice.
[    8.496149] systemd[1]: Reached target Slices.
[    8.496179] systemd[1]: Reached target Encrypted Volumes.
[    8.496278] systemd[1]: Listening on Journal Socket.
[    8.508306] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.509661] systemd[1]: Mounting Debug File System...
[    8.511008] systemd[1]: Mounting POSIX Message Queue File System...
[    8.515767] systemd[1]: Starting Load Kernel Modules...
[    8.516240] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.520485] systemd[1]: Starting Set Up Additional Binary Formats...
[    8.520896] systemd[1]: Created slice system-getty.slice.
[    8.522185] systemd[1]: Mounting Huge Pages File System...
[    8.522376] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.522496] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.522586] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.523843] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.523901] systemd[1]: Reached target Remote File Systems.
[    8.524371] systemd[1]: Listening on Syslog Socket.
[    8.529054] systemd[1]: Starting Journal Service...
[    8.529187] systemd[1]: Listening on udev Control Socket.
[    8.561610] systemd[1]: Mounted POSIX Message Queue File System.
[    8.561794] systemd[1]: Mounted Debug File System.
[    8.561989] systemd[1]: Mounted Huge Pages File System.
[    8.562648] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.578740] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 187 (systemd-binfmt)
[    8.588358] lp: driver loaded but no devices found
[    8.608465] ppdev: user-space parallel port driver
[    8.615246] systemd[1]: Started Load Kernel Modules.
[    8.690821] systemd[1]: Started Journal Service.
[    9.080352] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600,errors=remount-ro
[    9.330648] Adding 524284k swap on /swapfile1.  Priority:-1 extents:20 across:1712124k SSFS
[    9.345086] systemd-journald[190]: Received request to flush runtime journal from PID 1
[    9.513341] Monitor-Mwait will be used to enter C-1 state
[    9.522847] Monitor-Mwait will be used to enter C-2 state
[    9.522863] Monitor-Mwait will be used to enter C-3 state
[    9.522873] tsc: Marking TSC unstable due to TSC halts in idle
[    9.522895] ACPI: acpi_idle registered with cpuidle
[    9.529921] clocksource: Switched to clocksource hpet
[    9.530677] ACPI: AC Adapter [ADP1] (on-line)
[    9.650802] ACPI: SBS HC: EC = 0xf6099900, offset = 0x20, query_bit = 0x10
[    9.659311] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line)
[    9.691152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.815000] appletouch 1-2:1.1: Geyser mode initialized.
[    9.815177] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input12
[    9.815448] usbcore: registered new interface driver appletouch
[    9.826679] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[    9.884122] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9221 A1: line_outs=2 (0xc/0xd/0x0/0x0/0x0) type:speaker
[    9.884133] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.884140] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[    9.884145] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    9.884151] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x10/0x0
[    9.884156] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    9.884162] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[    9.884168] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[    9.884173] snd_hda_codec_idt hdaudioC0D0:    dig-in=0x11
[    9.921788] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.922015] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.922233] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.922443] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.048738] intel_rng: FWH not detected
[   10.051626] ath: EEPROM regdomain: 0x64
[   10.051632] ath: EEPROM indicates we should expect a direct regpair map
[   10.051637] ath: Country alpha2 being used: 00
[   10.051641] ath: Regpair used: 0x64
[   10.063741] sr 4:0:0:0: Attached scsi generic sg0 type 5
[   10.064539] sr 0:0:0:0: Attached scsi generic sg1 type 5
[   10.064792] sd 2:0:1:0: Attached scsi generic sg2 type 0
[   10.068857] usb 5-1: USB disconnect, device number 2
[   10.087168] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[   10.087185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.091002] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.091704] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xf9240000, irq=17
[   10.093747] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   10.093762] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.093770] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   10.093781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.093786] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   10.093796] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.093800] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.103050] input: PC Speaker as /devices/platform/pcspkr/input/input17
[   10.105427] leds_ss4200: no LED devices found
[   10.157436] wl: module license 'MIXED/Proprietary' taints kernel.
[   10.157444] Disabling lock debugging due to kernel taint
[   10.311629] applesmc: key=226 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
[   10.330698] input: applesmc as /devices/platform/applesmc.768/input/input18
[   10.428052] usb 5-1: new full-speed USB device number 3 using uhci_hcd
[   10.443764] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,commit=600,errors=remount-ro
[   10.463575] cfg80211: World regulatory domain updated:
[   10.463585] cfg80211:  DFS Master region: unset
[   10.463590] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.463597] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.463603] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.463609] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.463615] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.463622] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.463627] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.463632] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.463637] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.501970] ath9k 0000:02:00.0 wls1: renamed from wlan0
[   10.519227] iTCO_vendor_support: vendor-support=0
[   10.520860] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.520946] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[   10.523410] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.628089] usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
[   10.628099] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.663924] Bluetooth: Core ver 2.21
[   10.663963] NET: Registered protocol family 31
[   10.663968] Bluetooth: HCI device and connection manager initialized
[   10.668045] Bluetooth: HCI socket layer initialized
[   10.668056] Bluetooth: L2CAP socket layer initialized
[   10.668075] Bluetooth: SCO socket layer initialized
[   10.685555] usbcore: registered new interface driver btusb
[   11.087018] usb 4-4: firmware: failed to load isight.fw (-2)
[   11.087030] usb 4-4: Direct firmware load for isight.fw failed with error -2
[   11.087102] usbcore: registered new interface driver isight_firmware
[   11.831046] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.831055] Bluetooth: BNEP filters: protocol multicast
[   11.831066] Bluetooth: BNEP socket layer initialized
[   11.975753] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   11.981049] sky2 0000:01:00.0 enp1s0: enabling interface
[   11.985583] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   11.993527] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   12.006540] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   12.321236] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   12.890830] random: nonblocking pool is initialized
[   13.848510] sky2 0000:01:00.0 enp1s0: Link is up at 100 Mbps, full duplex, flow control both
[   13.848551] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   29.578337] fuse init (API version 7.23)
[   32.092092] Bluetooth: RFCOMM TTY layer initialized
[   32.092110] Bluetooth: RFCOMM socket layer initialized
[   32.092123] Bluetooth: RFCOMM ver 1.11
[   33.538028] ISO 9660 Extensions: Microsoft Joliet Level 1
[   33.541659] ISOFS: changing to secondary root
[   61.931942] dde-dock[1215]: segfault at 0 ip b5beab78 sp bfb2ba7c error 4 in libQt5DBus.so.5.5.1[b5bdb000+8c000]
[  102.867730] dde-dock[1660]: segfault at 0 ip b5b45b78 sp bfd8a2cc error 4 in libQt5DBus.so.5.5.1[b5b36000+8c000]
[  152.084949] dde-dock[2096]: segfault at 0 ip b5babb78 sp bffc0b7c error 4 in libQt5DBus.so.5.5.1[b5b9c000+8c000]
[  195.296658] dde-dock[2541]: segfault at 0 ip b5bf4b78 sp bfbb002c error 4 in libQt5DBus.so.5.5.1[b5be5000+8c000]
[  282.400268] dde-dock[2990]: segfault at 0 ip b5c00b78 sp bff2c02c error 4 in libQt5DBus.so.5.5.1[b5bf1000+8c000]
[  382.523306] perf interrupt took too long (2548 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
