[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-2-deepin-amd64 (yangbo@linuxdeepin.com) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Deepin 4.4.6-2 (2016-04-06)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=93033403-707f-4b15-b89d-5c20d5ad2923 ro splash quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb96bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb96c000-0x00000000bb9befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb9bf000-0x00000000bba82fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bba83000-0x00000000bbabefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bbabf000-0x00000000bbae9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbaea000-0x00000000bbafefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbaff000-0x00000000bbafffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbb00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Acer             Aspire 4736Z    /Aspire 4736Z    , BIOS V2.08 01/18/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFFDC000 mask FFFFE0000 write-protect
[    0.000000]   1 base 0FFFFC000 mask FFFFFC000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0BBC00000 mask FFFC00000 uncachable
[    0.000000]   6 base 0BBB00000 mask FFFF00000 uncachable
[    0.000000]   7 base 100000000 mask FC0000000 write-back
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbbb00 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x01d2a000, 0x01d2afff] PGTABLE
[    0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[    0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33570000-0x35aaffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000BBAFE120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BBAFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 0x00000000BBAEC000 00B545 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 0x00000000BBA8F000 000040
[    0.000000] ACPI: FACS 0x00000000BBA8F000 000040
[    0.000000] ACPI: HPET 0x00000000BBAFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 0x00000000BBAFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 0x00000000BBAFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASF! 0x00000000BBAF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: NSLI 0x00000000BBAF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 0x00000000BBAEB000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 0x00000000BBAEA000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bb96bfff]
[    0.000000]   node   0: [mem 0x00000000bb9bf000-0x00000000bba82fff]
[    0.000000]   node   0: [mem 0x00000000bbabf000-0x00000000bbae9fff]
[    0.000000]   node   0: [mem 0x00000000bbaff000-0x00000000bbafffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1030650
[    0.000000]   DMA32 zone: 12008 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 768506 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbc000000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb96c000-0xbb9befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbba83000-0xbbabefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbaea000-0xbbafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbb00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013fc00000 s92888 r8192 d29992 u524288
[    0.000000] pcpu-alloc: s92888 r8192 d29992 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1014525
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2-deepin-amd64 root=UUID=93033403-707f-4b15-b89d-5c20d5ad2923 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938584K/4122600K available (5711K kernel code, 1066K rwdata, 2856K rodata, 1308K init, 828K bss, 184016K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2094.853 MHz processor
[    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.70 BogoMIPS (lpj=8379412)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004028] ACPI: Core revision 20150930
[    0.016019] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.016057] Security Framework initialized
[    0.016061] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016071] AppArmor: AppArmor disabled by boot time parameter
[    0.016476] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.018841] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019994] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020023] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020431] Initializing cgroup subsys io
[    0.020439] Initializing cgroup subsys memory
[    0.020577] Disabling memory control group subsystem
[    0.020578] Initializing cgroup subsys devices
[    0.020583] Initializing cgroup subsys freezer
[    0.020588] Initializing cgroup subsys net_cls
[    0.020593] Initializing cgroup subsys perf_event
[    0.020597] Initializing cgroup subsys net_prio
[    0.020601] Initializing cgroup subsys pids
[    0.020632] CPU: Physical Processor ID: 0
[    0.020634] CPU: Processor Core ID: 0
[    0.020636] mce: CPU supports 6 MCE banks
[    0.020645] CPU0: Thermal monitoring enabled (TM2)
[    0.020649] process: using mwait in idle threads
[    0.020655] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.020656] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.021088] Freeing SMP alternatives memory: 24K (ffffffff81c53000 - ffffffff81c59000)
[    0.024009] ftrace: allocating 23691 entries in 93 pages
[    0.036377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.080000] x86: Booted up 1 node, 2 CPUs
[    0.080000] smpboot: Total of 2 processors activated (8379.41 BogoMIPS)
[    0.080161] devtmpfs: initialized
[    0.084014] PM: Registering ACPI NVS region [mem 0xbba83000-0xbbabefff] (245760 bytes)
[    0.084014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.084040] pinctrl core: initialized pinctrl subsystem
[    0.084231] NET: Registered protocol family 16
[    0.092005] cpuidle: using governor ladder
[    0.104002] cpuidle: using governor menu
[    0.104034] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.104035] Simple Boot Flag at 0x44 set to 0x1
[    0.104076] ACPI: bus type PCI registered
[    0.104078] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.104188] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.104192] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.104199] PCI: Using configuration type 1 for base access
[    0.120092] ACPI: Added _OSI(Module Device)
[    0.120096] ACPI: Added _OSI(Processor Device)
[    0.120098] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120099] ACPI: Added _OSI(Processor Aggregator Device)
[    0.120710] ACPI: Executed 1 blocks of module-level executable AML code
[    0.122457] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.122855] ACPI: Dynamic OEM Table Load:
[    0.122863] ACPI: SSDT 0xFFFF88013A5B3800 000223 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.123491] ACPI: Dynamic OEM Table Load:
[    0.123498] ACPI: SSDT 0xFFFF88013B097800 000537 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.124404] ACPI: Dynamic OEM Table Load:
[    0.124410] ACPI: SSDT 0xFFFF88013B098E00 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.125010] ACPI: Dynamic OEM Table Load:
[    0.125016] ACPI: SSDT 0xFFFF88013A542340 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.125703] ACPI : EC: EC started
[    0.144067] ACPI: Interpreter enabled
[    0.144077] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.144083] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.144105] ACPI: (supports S0 S3 S4 S5)
[    0.144107] ACPI: Using IOAPIC for interrupt routing
[    0.144147] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.375461] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.375470] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.375477] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.375493] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.376034] PCI host bridge to bus 0000:00
[    0.376038] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.376041] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.376043] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.376046] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.376049] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.376060] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.376092] DMAR: Forcing write-buffer flush capability
[    0.376093] DMAR: Disabling IOMMU for graphics on this chipset
[    0.376197] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.376215] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.376224] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.376230] pci 0000:00:02.0: reg 0x20: [io  0x5110-0x5117]
[    0.376350] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.376365] pci 0000:00:02.1: reg 0x10: [mem 0xd3400000-0xd34fffff 64bit]
[    0.376519] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.376583] pci 0000:00:1a.0: reg 0x20: [io  0x50e0-0x50ff]
[    0.376699] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.376761] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.376827] pci 0000:00:1a.1: reg 0x20: [io  0x50c0-0x50df]
[    0.376977] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.377844] pci 0000:00:1a.7: reg 0x10: [mem 0xd6705c00-0xd6705fff]
[    0.382289] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.382347] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.382411] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.382441] pci 0000:00:1b.0: reg 0x10: [mem 0xd6700000-0xd6703fff 64bit]
[    0.382513] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.382571] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.382632] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.382712] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.382824] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.382904] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.383016] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.383096] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.383155] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.383226] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.383292] pci 0000:00:1d.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.383408] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.383470] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.383529] pci 0000:00:1d.1: reg 0x20: [io  0x5080-0x509f]
[    0.383670] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.383737] pci 0000:00:1d.2: reg 0x20: [io  0x5060-0x507f]
[    0.384040] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.384112] pci 0000:00:1d.3: reg 0x20: [io  0x5040-0x505f]
[    0.384263] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.385053] pci 0000:00:1d.7: reg 0x10: [mem 0xd6705800-0xd6705bff]
[    0.389168] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.389229] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.389288] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.389438] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.389644] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.389673] pci 0000:00:1f.2: reg 0x10: [io  0x5108-0x510f]
[    0.389682] pci 0000:00:1f.2: reg 0x14: [io  0x511c-0x511f]
[    0.389691] pci 0000:00:1f.2: reg 0x18: [io  0x5100-0x5107]
[    0.389700] pci 0000:00:1f.2: reg 0x1c: [io  0x5118-0x511b]
[    0.389709] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.389719] pci 0000:00:1f.2: reg 0x24: [mem 0xd6705000-0xd67057ff]
[    0.389757] pci 0000:00:1f.2: PME# supported from D3hot
[    0.389862] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.389882] pci 0000:00:1f.3: reg 0x10: [mem 0xd6706000-0xd67060ff 64bit]
[    0.389905] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.390021] pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
[    0.390053] pci 0000:00:1f.6: reg 0x10: [mem 0xd6704000-0xd6704fff 64bit]
[    0.390297] acpiphp: Slot [1] registered
[    0.390304] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.390309] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.390313] pci 0000:00:1c.0:   bridge window [mem 0xd5700000-0xd66fffff]
[    0.390320] pci 0000:00:1c.0:   bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.390395] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000
[    0.390446] pci 0000:04:00.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
[    0.390564] pci 0000:04:00.0: supports D1
[    0.390567] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.390647] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.390658] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.390663] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.390667] pci 0000:00:1c.1:   bridge window [mem 0xd4600000-0xd56fffff]
[    0.390673] pci 0000:00:1c.1:   bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.390746] pci 0000:05:00.0: [1969:1063] type 00 class 0x020000
[    0.390794] pci 0000:05:00.0: reg 0x10: [mem 0xd3500000-0xd353ffff 64bit]
[    0.390807] pci 0000:05:00.0: reg 0x18: [io  0x1000-0x107f]
[    0.390911] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400024] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.400029] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.400033] pci 0000:00:1c.2:   bridge window [mem 0xd3500000-0xd45fffff]
[    0.400040] pci 0000:00:1c.2:   bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[    0.400128] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.400139] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.400141] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.400144] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.400146] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.512247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.512328] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.512405] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.512482] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.512559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.512637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.512713] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.512790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.513632] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.513708] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.516023] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.516023] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.516023] vgaarb: loaded
[    0.516025] vgaarb: bridge control possible 0000:00:02.0
[    0.516172] PCI: Using ACPI for IRQ routing
[    0.517863] PCI: pci_cache_line_size set to 64 bytes
[    0.517932] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.517934] e820: reserve RAM buffer [mem 0xbb96c000-0xbbffffff]
[    0.517936] e820: reserve RAM buffer [mem 0xbba83000-0xbbffffff]
[    0.517938] e820: reserve RAM buffer [mem 0xbbaea000-0xbbffffff]
[    0.517939] e820: reserve RAM buffer [mem 0xbbb00000-0xbbffffff]
[    0.517939] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.517939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.517939] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.520035] clocksource: Switched to clocksource hpet
[    0.530294] pnp: PnP ACPI init
[    0.636249] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x2fff]
[    0.636329] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.636332] system 00:00: [io  0x0610] has been reserved
[    0.636335] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.636338] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.636341] system 00:00: [io  0x0820-0x0823] has been reserved
[    0.636343] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.636346] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.636349] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.636354] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.636357] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.636360] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.636362] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.636365] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.636368] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.636371] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.636373] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.636379] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.636441] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.636542] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.636657] pnp 00:03: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[    0.636837] pnp: PnP ACPI: found 4 devices
[    0.644089] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.644142] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.644146] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.644152] pci 0000:00:1c.0:   bridge window [mem 0xd5700000-0xd66fffff]
[    0.644157] pci 0000:00:1c.0:   bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.644164] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.644167] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.644172] pci 0000:00:1c.1:   bridge window [mem 0xd4600000-0xd56fffff]
[    0.644177] pci 0000:00:1c.1:   bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.644184] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.644187] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.644192] pci 0000:00:1c.2:   bridge window [mem 0xd3500000-0xd45fffff]
[    0.644197] pci 0000:00:1c.2:   bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[    0.644203] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.644216] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.644219] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.644221] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644224] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.644227] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.644229] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[    0.644231] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[    0.644234] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.644236] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[    0.644239] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[    0.644241] pci_bus 0000:05: resource 0 [io  0x1000-0x2fff]
[    0.644243] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[    0.644246] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[    0.644249] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.644251] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.644253] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644256] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.644318] NET: Registered protocol family 2
[    0.644546] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.644685] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.644875] TCP: Hash tables configured (established 32768 bind 32768)
[    0.644947] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.644981] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.645189] NET: Registered protocol family 1
[    0.645217] pci 0000:00:02.0: Video device with shadowed ROM
[    0.676044] PCI: CLS 64 bytes, default 64
[    0.676129] Unpacking initramfs...
[    1.433737] Freeing initrd memory: 38144K (ffff880033570000 - ffff880035ab0000)
[    1.433789] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.433794] software IO TLB [mem 0xb796c000-0xbb96c000] (64MB) mapped at [ffff8800b796c000-ffff8800bb96bfff]
[    1.434461] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.434518] audit: initializing netlink subsys (disabled)
[    1.434550] audit: type=2000 audit(1466541684.432:1): initialized
[    1.435082] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.435110] zbud: loaded
[    1.435272] VFS: Disk quotas dquot_6.6.0
[    1.435298] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.435895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.435938] io scheduler noop registered
[    1.435941] io scheduler deadline registered
[    1.435955] io scheduler cfq registered (default)
[    1.436278] pcieport 0000:00:1c.0: enabling device (0001 -> 0003)
[    1.437378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.437389] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.437422] intel_idle: does not run on family 6 model 23
[    1.437487] GHES: HEST is not enabled!
[    1.437594] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.438158] Linux agpgart interface v0.103
[    1.438257] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    1.438279] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.438567] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.438710] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.438775] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.438776] AMD IOMMUv2 functionality not available on this system
[    1.439038] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.489654] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.489663] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.489856] mousedev: PS/2 mouse device common for all mice
[    1.492216] rtc_cmos 00:01: RTC can wake from S4
[    1.492380] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.492412] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.492433] ledtrig-cpu: registered to indicate activity on CPUs
[    1.493005] NET: Registered protocol family 10
[    1.493262] mip6: Mobile IPv6
[    1.493268] NET: Registered protocol family 17
[    1.493275] mpls_gso: MPLS GSO support
[    1.493493] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    1.493503] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[    1.493550] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.493759] registered taskstats version 1
[    1.493796] zswap: loaded using pool lzo/zbud
[    1.494310] rtc_cmos 00:01: setting system clock to 2016-06-21 20:41:25 UTC (1466541685)
[    1.494427] PM: Hibernation image not present or could not be loaded.
[    1.496215] Freeing unused kernel memory: 1308K (ffffffff81b0c000 - ffffffff81c53000)
[    1.496220] Write protecting the kernel read-only data: 10240k
[    1.496654] Freeing unused kernel memory: 420K (ffff880001597000 - ffff880001600000)
[    1.500816] Freeing unused kernel memory: 1240K (ffff8800018ca000 - ffff880001a00000)
[    1.510281] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.524381] random: systemd-udevd urandom read with 5 bits of entropy available
[    1.539034] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.567220] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input2
[    1.567227] ACPI: Power Button [PWRB]
[    1.567999] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input3
[    1.568081] ACPI: Lid Switch [LID0]
[    1.568175] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input4
[    1.568179] ACPI: Sleep Button [SLPB]
[    1.568289] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.568291] ACPI: Power Button [PWRF]
[    1.570644] wmi: Mapper loaded
[    1.582147] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.587947] ACPI: bus type USB registered
[    1.587990] usbcore: registered new interface driver usbfs
[    1.590028] usbcore: registered new interface driver hub
[    1.590077] usbcore: registered new device driver usb
[    1.590777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.591225] uhci_hcd: USB Universal Host Controller Interface driver
[    1.591576] ehci-pci: EHCI PCI platform driver
[    1.595403] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.595416] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.595428] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.595462] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050e0
[    1.595586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.595590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.595592] usb usb1: Product: UHCI Host Controller
[    1.595595] usb usb1: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    1.595597] usb usb1: SerialNumber: 0000:00:1a.0
[    1.595792] hub 1-0:1.0: USB hub found
[    1.595801] hub 1-0:1.0: 2 ports detected
[    1.597719] [drm] Initialized drm 1.1.0 20060810
[    1.600939] thermal LNXTHERM:00: registered as thermal_zone0
[    1.600945] ACPI: Thermal Zone [TZ01] (36 C)
[    1.601523] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.601535] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    1.601553] ehci-pci 0000:00:1a.7: debug port 1
[    1.602885] SCSI subsystem initialized
[    1.605488] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.605543] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd6705c00
[    1.616750] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.616838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.616842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.616844] usb usb2: Product: EHCI Host Controller
[    1.616846] usb usb2: Manufacturer: Linux 4.4.0-2-deepin-amd64 ehci_hcd
[    1.616849] usb usb2: SerialNumber: 0000:00:1a.7
[    1.617062] hub 2-0:1.0: USB hub found
[    1.617073] hub 2-0:1.0: 4 ports detected
[    1.621971] libata version 3.00 loaded.
[    1.624560] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    1.640132] hub 1-0:1.0: USB hub found
[    1.640146] hub 1-0:1.0: 2 ports detected
[    1.640540] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.640551] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.640567] ehci-pci 0000:00:1d.7: debug port 1
[    1.644484] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.646911] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6705800
[    1.657626] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.657722] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.657725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.657728] usb usb3: Product: EHCI Host Controller
[    1.657730] usb usb3: Manufacturer: Linux 4.4.0-2-deepin-amd64 ehci_hcd
[    1.657732] usb usb3: SerialNumber: 0000:00:1d.7
[    1.657926] hub 3-0:1.0: USB hub found
[    1.657937] hub 3-0:1.0: 8 ports detected
[    1.658581] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.658593] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.658604] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.658629] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[    1.658712] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.658715] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.658717] usb usb4: Product: UHCI Host Controller
[    1.658719] usb usb4: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    1.658721] usb usb4: SerialNumber: 0000:00:1a.1
[    1.658899] hub 4-0:1.0: USB hub found
[    1.658909] hub 4-0:1.0: 2 ports detected
[    1.659284] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.659295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.659304] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.659328] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    1.659405] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.659408] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.659410] usb usb5: Product: UHCI Host Controller
[    1.659412] usb usb5: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    1.659414] usb usb5: SerialNumber: 0000:00:1d.0
[    1.659606] hub 5-0:1.0: USB hub found
[    1.659617] hub 5-0:1.0: 2 ports detected
[    1.659971] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.659981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.659990] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.660041] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    1.660126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.660129] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660131] usb usb6: Product: UHCI Host Controller
[    1.660134] usb usb6: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    1.660136] usb usb6: SerialNumber: 0000:00:1d.1
[    1.660319] hub 6-0:1.0: USB hub found
[    1.660330] hub 6-0:1.0: 2 ports detected
[    1.660681] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.660692] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.660701] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.660725] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060
[    1.660795] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.660798] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660801] usb usb7: Product: UHCI Host Controller
[    1.660803] usb usb7: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    1.660805] usb usb7: SerialNumber: 0000:00:1d.2
[    1.660982] hub 7-0:1.0: USB hub found
[    1.660992] hub 7-0:1.0: 2 ports detected
[    1.661935] [drm] Memory usable by graphics device = 2048M
[    1.661941] [drm] Replacing VGA console driver
[    1.662820] Console: switching to colour dummy device 80x25
[    1.670812] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.670817] [drm] Driver supports precise vblank timestamp query.
[    1.671157] [drm] applying inverted panel brightness quirk
[    1.671179] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.676294] atl1c 0000:05:00.0 enp5s0: renamed from eth0
[    1.792872] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    1.793426] fbcon: inteldrmfb (fb0) is primary device
[    1.968015] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    2.137707] usb 3-4: New USB device found, idVendor=04f2, idProduct=b044
[    2.137709] usb 3-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.137711] usb 3-4: Product: CNF7017
[    2.137712] usb 3-4: Manufacturer: Chicony Electronics Co., Ltd.
[    2.137714] usb 3-4: SerialNumber: SN0001
[    2.432015] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[    2.432018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31d02b3dd, max_idle_ns: 440795254494 ns
[    2.460068] Console: switching to colour frame buffer device 170x48
[    2.463029] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.571092] acpi device:08: registered as cooling_device0
[    2.571207] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    2.571290] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    2.571680] ahci 0000:00:1f.2: version 3.0
[    2.571987] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.572045] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    2.572049] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs 
[    2.581392] scsi host0: ahci
[    2.581659] scsi host1: ahci
[    2.581910] scsi host2: ahci
[    2.582157] scsi host3: ahci
[    2.582243] ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 28
[    2.582247] ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 28
[    2.582249] ata3: DUMMY
[    2.582250] ata4: DUMMY
[    2.582952] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.582964] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    2.582975] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.583011] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[    2.583092] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.583095] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.583097] usb usb8: Product: UHCI Host Controller
[    2.583099] usb usb8: Manufacturer: Linux 4.4.0-2-deepin-amd64 uhci_hcd
[    2.583101] usb usb8: SerialNumber: 0000:00:1d.3
[    2.583438] hub 8-0:1.0: USB hub found
[    2.583553] hub 8-0:1.0: 2 ports detected
[    3.072023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.072992] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[    3.072995] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.074108] ata1.00: configured for UDMA/133
[    3.074310] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 C60F PQ: 0 ANSI: 5
[    3.318890] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    3.434006] clocksource: Switched to clocksource tsc
[    3.545062] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    3.564014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.567610] ata2.00: ATAPI: Slimtype DVD A  DS8A3S, HA17, max UDMA/100
[    3.570027] ata2.00: configured for UDMA/100
[    3.574982] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A3S    HA17 PQ: 0 ANSI: 5
[    3.590713] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.590769] sd 0:0:0:0: [sda] Write Protect is off
[    3.590772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.590795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.608507] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    3.608511] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.608713] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.614546]  sda: sda1
[    3.614838] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.686771] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.093993] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.136026] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    5.516052] usb 5-1: New USB device found, idVendor=046d, idProduct=c077
[    5.516058] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.516061] usb 5-1: Product: USB Optical Mouse
[    5.516063] usb 5-1: Manufacturer: Logitech
[    5.956752] random: nonblocking pool is initialized
[    6.260106] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.260313] systemd[1]: Detected architecture x86-64.
[    6.278037] systemd[1]: Set hostname to <spring-pc>.
[    7.995989] systemd[1]: Reached target Encrypted Volumes.
[    7.996213] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.996274] systemd[1]: Listening on udev Kernel Socket.
[    7.996317] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.996571] systemd[1]: Created slice System Slice.
[    7.996643] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.996702] systemd[1]: Listening on Journal Socket.
[    8.012119] systemd[1]: Mounting POSIX Message Queue File System...
[    8.013134] systemd[1]: Mounting Debug File System...
[    8.013207] systemd[1]: Reached target User and Group Name Lookups.
[    8.013357] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.016118] systemd[1]: Listening on Journal Audit Socket.
[    8.016257] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.016288] systemd[1]: Reached target Swap.
[    8.017315] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.017351] systemd[1]: Reached target Remote File Systems (Pre).
[    8.017387] systemd[1]: Reached target Remote File Systems.
[    8.017488] systemd[1]: Listening on Syslog Socket.
[    8.018478] systemd[1]: Starting Journal Service...
[    8.018761] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.092210] systemd[1]: Starting Set Up Additional Binary Formats...
[    8.092332] systemd[1]: Listening on udev Control Socket.
[    8.092627] systemd[1]: Created slice system-getty.slice.
[    8.092819] systemd[1]: Created slice User and Session Slice.
[    8.092841] systemd[1]: Reached target Slices.
[    8.092915] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.092964] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.093851] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.094822] systemd[1]: Mounting Huge Pages File System...
[    8.168195] systemd[1]: Starting Load Kernel Modules...
[    8.207373] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 189 (systemd-binfmt)
[    8.224155] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    8.482910] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.496267] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.556779] systemd[1]: Started Journal Service.
[    9.007971] lp: driver loaded but no devices found
[    9.039627] ppdev: user-space parallel port driver
[    9.906998] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[   10.056812] systemd-journald[186]: Received request to flush runtime journal from PID 1
[   10.606084] Monitor-Mwait will be used to enter C-1 state
[   10.606095] Monitor-Mwait will be used to enter C-2 state
[   10.606100] tsc: Marking TSC unstable due to TSC halts in idle
[   10.606106] ACPI: acpi_idle registered with cpuidle
[   10.606442] clocksource: Switched to clocksource hpet
[   10.970623] ACPI: AC Adapter [AC] (on-line)
[   11.354119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.429749] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.429756] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.429758] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.429761] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.429763] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.429765] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.429768] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.429771] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.429773] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   11.774160] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   11.787201] input: PC Speaker as /devices/platform/pcspkr/input/input12
[   11.858723] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.859792] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.859890] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.859976] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.860286] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.978990] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20150930/utaddress-254)
[   11.979000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.979005] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   11.979009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.979011] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   11.979016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.979017] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.333311] media: Linux media interface: v0.10
[   12.353238] Linux video capture interface: v2.00
[   12.490290] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[   12.494185] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.494237] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   12.547278] input: CNF7017 as /devices/pci0000:00/0000:00:1d.7/usb3/3-4/3-4:1.0/input/input14
[   12.547365] usbcore: registered new interface driver uvcvideo
[   12.547367] USB Video Class driver (1.1.1)
[   12.578135] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.593432] acer_wmi: Function bitmap for Communication Device: 0x81
[   12.593726] input: Acer BMA150 accelerometer as /devices/virtual/input/input15
[   12.598038] hidraw: raw HID events driver (C) Jiri Kosina
[   12.631731] usbcore: registered new interface driver usbhid
[   12.631736] usbhid: USB HID core driver
[   12.776139] ath: EEPROM regdomain: 0x65
[   12.776144] ath: EEPROM indicates we should expect a direct regpair map
[   12.776147] ath: Country alpha2 being used: 00
[   12.776148] ath: Regpair used: 0x65
[   12.909671] usbcore: registered new interface driver usbmouse
[   12.912680] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.913031] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90000aa0000, irq=17
[   13.092215] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C077.0001/input/input16
[   13.092599] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[   13.156121] ACPI: Battery Slot [BAT0] (battery present)
[   13.324370] iTCO_vendor_support: vendor-support=0
[   13.337330] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.337404] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   13.337843] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.040849] wl: module license 'MIXED/Proprietary' taints kernel.
[   16.040855] Disabling lock debugging due to kernel taint
[   16.625886] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   23.030592] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   23.045090] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   23.050438] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   23.064901] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   24.828372] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   52.062083] fuse init (API version 7.23)
[  199.588653] JFS: nTxBlock = 8192, nTxLock = 65536
[  199.768747] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  276.024051] usb 2-1: new high-speed USB device number 2 using ehci-pci
[  276.260034] usb 2-1: New USB device found, idVendor=0011, idProduct=7788
[  276.260042] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  276.260046] usb 2-1: Product: Mass Storage
[  276.260050] usb 2-1: Manufacturer: Generic
[  276.260054] usb 2-1: SerialNumber: 0587307E
[  276.325634] usb-storage 2-1:1.0: USB Mass Storage device detected
[  276.325751] scsi host4: usb-storage 2-1:1.0
[  276.325870] usbcore: registered new interface driver usb-storage
[  276.339221] usbcore: registered new interface driver uas
[  277.326209] scsi 4:0:0:0: Direct-Access     Generic  Flash Disk       8.00 PQ: 0 ANSI: 2
[  277.328185] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  277.330029] sd 4:0:0:0: [sdb] 8253440 512-byte logical blocks: (4.23 GB/3.94 GiB)
[  277.330800] sd 4:0:0:0: [sdb] Write Protect is off
[  277.330809] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  277.331553] sd 4:0:0:0: [sdb] No Caching mode page found
[  277.331562] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  277.747324]  sdb: sdb1
[  277.750654] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  277.797534] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  277.797542] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  277.797545] blk_update_request: I/O error, dev sdb, sector 8253432
[  277.837292] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  277.837299] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  277.837303] blk_update_request: I/O error, dev sdb, sector 8253432
[  277.837307] Buffer I/O error on dev sdb, logical block 1031679, async page read
[  278.255069] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  495.644099] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[  495.809159] usb 5-2: New USB device found, idVendor=12d1, idProduct=1001
[  495.809165] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[  495.809169] usb 5-2: Product: HUAWEI Mobile
[  495.809172] usb 5-2: Manufacturer: HUAÿWEI TECHNOLOGIES
[  495.809175] usb 5-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[  495.812334] usb-storage 5-2:1.0: USB Mass Storage device detected
[  495.814233] scsi host5: usb-storage 5-2:1.0
[  495.814530] usb 5-2: USB disconnect, device number 3
[  496.384068] usb 5-2: new full-speed USB device number 4 using uhci_hcd
[  496.545167] usb 5-2: New USB device found, idVendor=12d1, idProduct=1001
[  496.545176] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[  496.545181] usb 5-2: Product: HUAWEI Mobile
[  496.545185] usb 5-2: Manufacturer: HUAÿWEI TECHNOLOGIES
[  496.545189] usb 5-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[  496.550255] usb-storage 5-2:1.0: USB Mass Storage device detected
[  496.552321] usb-storage 5-2:1.1: USB Mass Storage device detected
[  496.555266] usb-storage 5-2:1.2: USB Mass Storage device detected
[  496.555788] usb-storage 5-2:1.3: USB Mass Storage device detected
[  496.557221] scsi host9: usb-storage 5-2:1.3
[  497.560207] scsi 9:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 0
[  497.563191] scsi 9:0:0:1: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[  497.582182] sr 9:0:0:0: [sr1] scsi-1 drive
[  497.582397] sr 9:0:0:0: Attached scsi CD-ROM sr1
[  497.582530] sr 9:0:0:0: Attached scsi generic sg3 type 5
[  497.582793] sd 9:0:0:1: Attached scsi generic sg4 type 0
[  497.600178] sd 9:0:0:1: [sdc] Attached SCSI removable disk
[  497.660785] usbcore: registered new interface driver usbserial
[  497.660805] usbcore: registered new interface driver usbserial_generic
[  497.660822] usbserial: USB Serial support registered for generic
[  497.675655] usbcore: registered new interface driver option
[  497.675678] usbserial: USB Serial support registered for GSM modem (1-port)
[  497.675803] option 5-2:1.0: GSM modem (1-port) converter detected
[  497.675931] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
[  497.675954] option 5-2:1.1: GSM modem (1-port) converter detected
[  497.676461] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
[  497.676492] option 5-2:1.2: GSM modem (1-port) converter detected
[  497.676726] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2
[  599.325361] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  599.325370] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  599.325373] blk_update_request: I/O error, dev sdb, sector 8253432
[  599.369360] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  599.369369] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  599.369372] blk_update_request: I/O error, dev sdb, sector 8253432
[  599.369377] Buffer I/O error on dev sdb, logical block 1031679, async page read
[  599.417348] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  599.417355] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  599.417358] blk_update_request: I/O error, dev sdb, sector 8253432
[  599.417363] Buffer I/O error on dev sdb, logical block 1031679, async page read
[  599.469348] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  599.469356] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef f8 00 00 01 00
[  599.469359] blk_update_request: I/O error, dev sdb, sector 8253432
[  599.469364] Buffer I/O error on dev sdb, logical block 1031679, async page read
[  600.345345] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  600.345353] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 7d ef fe 00 00 01 00
[  600.345356] blk_update_request: I/O error, dev sdb, sector 8253438
[  600.692030] atl1c 0000:05:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  600.780017] atl1c 0000:05:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
[  600.971157] Bluetooth: Core ver 2.21
[  600.971184] NET: Registered protocol family 31
[  600.971186] Bluetooth: HCI device and connection manager initialized
[  600.971194] Bluetooth: HCI socket layer initialized
[  600.971199] Bluetooth: L2CAP socket layer initialized
[  600.971217] Bluetooth: SCO socket layer initialized
[  601.056029] atl1c 0000:05:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update
