[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-8) ) #1 SMP Debian 4.2.6-3 (2015-12-06)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 root=UUID=f3c7ed14-099d-43bd-a715-68fe42fab8b7 ro splash quiet
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000abd9bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000abd9c000-0x00000000abf9bfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000abf9c000-0x00000000acdfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000acdff000-0x00000000acf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000acf7f000-0x00000000acffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Lenovo
[    0.000000] efi:  ACPI=0xacffe000  ACPI 2.0=0xacffe014  SMBIOS=0xacdfe000  ESRT=0xac156000 
[    0.000000] esrt: Reserving ESRT space from 0x00000000ac156000 to 0x00000000ac156038.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20DFA008CD/20DFA008CD, BIOS J5ET49WW (1.20 ) 10/22/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000005f000] 5f000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01f2d000, 0x01f2dfff] PGTABLE
[    0.000000] BRK [0x01f2e000, 0x01f2efff] PGTABLE
[    0.000000] BRK [0x01f2f000, 0x01f2ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
[    0.000000]  [mem 0x14ee00000-0x14effffff] page 2M
[    0.000000] BRK [0x01f30000, 0x01f30fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x140000000-0x14edfffff]
[    0.000000]  [mem 0x140000000-0x14edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff]
[    0.000000]  [mem 0x120000000-0x13fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xabd9bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xabbfffff] page 2M
[    0.000000]  [mem 0xabc00000-0xabd9bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xacfff000-0xacffffff]
[    0.000000]  [mem 0xacfff000-0xacffffff] page 4k
[    0.000000] BRK [0x01f31000, 0x01f31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x33d68000-0x35eabfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000ACFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000ACFFE1C0 0000CC (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000ACFF9000 00010C (v05 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000ACFE3000 0112E7 (v01 LENOVO TP-J5    00001200 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000ACF68000 000040
[    0.000000] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000ACFFC000 000038 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: ECDT 0x00000000ACFFB000 000052 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000ACFF8000 000098 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000ACFF7000 00003C (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000ACFF6000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFF5000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFE2000 000922 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFE1000 00062A (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFE0000 000B74 (v02 LENOVO CpuSsdt  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFDF000 000369 (v02 LENOVO CtdpB    00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFDD000 001477 (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000ACFDC000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 0x00000000ACFDB000 00006E (v05 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000ACFDA000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 0x00000000ACFD9000 000042 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x00000000ACF42000 000055 (v03 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: BATB 0x00000000ACFD8000 000046 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000ACFD7000 000064 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000ACFD6000 0002E2 (v01 LENOVO TP-J5    00001200 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14effa000-0x14effdfff]
[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000014effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000abd9bfff]
[    0.000000]   node   0: [mem 0x00000000acfff000-0x00000000acffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000014effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014effffff]
[    0.000000] On node 0 totalpages: 1027367
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 73 pages reserved
[    0.000000]   DMA zone: 3978 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10935 pages used for memmap
[    0.000000]   DMA32 zone: 699805 pages, LIFO batch:31
[    0.000000]   Normal zone: 5056 pages used for memmap
[    0.000000]   Normal zone: 323584 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xabd9c000-0xabf9bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xabf9c000-0xacdfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xacdff000-0xacf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xacf7f000-0xacffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xad000000-0xadffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88014ec00000 s92696 r8192 d30184 u262144
[    0.000000] pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011239
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 root=UUID=f3c7ed14-099d-43bd-a715-68fe42fab8b7 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3857112K/4109468K available (5479K kernel code, 1095K rwdata, 2748K rodata, 1292K init, 832K bss, 252356K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.915 MHz processor
[    0.000076] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.83 BogoMIPS (lpj=8779660)
[    0.000083] pid_max: default: 32768 minimum: 301
[    0.000099] ACPI: Core revision 20150619
[    0.055188] ACPI: All ACPI Tables successfully acquired
[    0.135544] Security Framework initialized
[    0.135553] AppArmor: AppArmor disabled by boot time parameter
[    0.135555] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.136279] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.138445] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.139411] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.139425] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.139890] Initializing cgroup subsys blkio
[    0.139896] Initializing cgroup subsys memory
[    0.139911] Initializing cgroup subsys devices
[    0.139917] Initializing cgroup subsys freezer
[    0.139921] Initializing cgroup subsys net_cls
[    0.139928] Initializing cgroup subsys perf_event
[    0.139933] Initializing cgroup subsys net_prio
[    0.139997] CPU: Physical Processor ID: 0
[    0.139999] CPU: Processor Core ID: 0
[    0.140008] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.140010] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.142113] mce: CPU supports 7 MCE banks
[    0.142144] CPU0: Thermal monitoring enabled (TM1)
[    0.142164] process: using mwait in idle threads
[    0.142171] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.142173] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.142990] Freeing SMP alternatives memory: 20K (ffffffff81c56000 - ffffffff81c5b000)
[    0.156320] ftrace: allocating 23178 entries in 91 pages
[    0.180124] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.180842] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.220578] TSC deadline timer enabled
[    0.220584] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (fam: 06, model: 3d, stepping: 04)
[    0.220639] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[    0.220690] ... version:                3
[    0.220693] ... bit width:              48
[    0.220695] ... generic registers:      4
[    0.220697] ... value mask:             0000ffffffffffff
[    0.220699] ... max period:             0000ffffffffffff
[    0.220701] ... fixed-purpose events:   3
[    0.220704] ... event mask:             000000070000000f
[    0.222052] x86: Booting SMP configuration:
[    0.222056] .... node  #0, CPUs:      #1
[    0.228084] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.228263]  #2 #3
[    0.239309] x86: Booted up 1 node, 4 CPUs
[    0.239315] smpboot: Total of 4 processors activated (17559.32 BogoMIPS)
[    0.248808] devtmpfs: initialized
[    0.254312] PM: Registering ACPI NVS region [mem 0xacdff000-0xacf7efff] (1572864 bytes)
[    0.254561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.254781] pinctrl core: initialized pinctrl subsystem
[    0.255115] NET: Registered protocol family 16
[    0.264298] cpuidle: using governor ladder
[    0.276318] cpuidle: using governor menu
[    0.276496] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.276500] ACPI: bus type PCI registered
[    0.276504] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.276888] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.276893] PCI: not using MMCONFIG
[    0.276896] PCI: Using configuration type 1 for base access
[    0.293188] ACPI: Added _OSI(Module Device)
[    0.293193] ACPI: Added _OSI(Processor Device)
[    0.293196] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.293199] ACPI: Added _OSI(Processor Aggregator Device)
[    0.298199] ACPI : EC: EC description table is found, configuring boot EC
[    0.298220] ACPI : EC: EC started
[    0.312756] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.327683] ACPI: Dynamic OEM Table Load:
[    0.327711] ACPI: SSDT 0xFFFF880149791000 000436 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.329706] ACPI: Dynamic OEM Table Load:
[    0.329730] ACPI: SSDT 0xFFFF8801494CD800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.331897] ACPI: Dynamic OEM Table Load:
[    0.331917] ACPI: SSDT 0xFFFF8801494C5A00 000119 (v02 PmRef  ApCst    00003000 INTL 20120711)
[    0.334848] ACPI: Interpreter enabled
[    0.334870] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.334888] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.334938] ACPI: (supports S0 S3 S4 S5)
[    0.334941] ACPI: Using IOAPIC for interrupt routing
[    0.334994] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.335860] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.335907] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.343259] ACPI: Power Resource [PUBS] (off)
[    0.345074] ACPI: Power Resource [AMD3] (on)
[    0.345146] ACPI: Power Resource [AMD2] (on)
[    0.357981] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.358125] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358389] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358519] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358648] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.358906] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.359055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.359066] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.359349] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.359474] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.359480] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.359484] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.359488] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.359836] PCI host bridge to bus 0000:00
[    0.359843] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.359848] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.359852] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.359856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.359860] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window]
[    0.359877] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.360072] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.360108] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[    0.360124] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360136] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.360320] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.360351] pci 0000:00:03.0: reg 0x10: [mem 0xe1330000-0xe1333fff 64bit]
[    0.360585] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.360626] pci 0000:00:14.0: reg 0x10: [mem 0xe1320000-0xe132ffff 64bit]
[    0.360707] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.360780] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.360875] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.360920] pci 0000:00:16.0: reg 0x10: [mem 0xe1339000-0xe133901f 64bit]
[    0.361008] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.361163] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[    0.361201] pci 0000:00:19.0: reg 0x10: [mem 0xe1300000-0xe131ffff]
[    0.361215] pci 0000:00:19.0: reg 0x14: [mem 0xe133e000-0xe133efff]
[    0.361229] pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
[    0.361301] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.361370] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.361459] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.361500] pci 0000:00:1b.0: reg 0x10: [mem 0xe1334000-0xe1337fff 64bit]
[    0.361578] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.361728] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.361822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.362073] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.362170] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.362326] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.362417] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.362514] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.362668] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[    0.362763] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.363000] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.363043] pci 0000:00:1d.0: reg 0x10: [mem 0xe133d000-0xe133d3ff]
[    0.363150] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.363223] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.363312] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.363592] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.363628] pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
[    0.363641] pci 0000:00:1f.2: reg 0x14: [io  0x50b4-0x50b7]
[    0.363654] pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
[    0.363667] pci 0000:00:1f.2: reg 0x1c: [io  0x50b0-0x50b3]
[    0.363680] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.363693] pci 0000:00:1f.2: reg 0x24: [mem 0xe133c000-0xe133c7ff]
[    0.363735] pci 0000:00:1f.2: PME# supported from D3hot
[    0.363879] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.363906] pci 0000:00:1f.3: reg 0x10: [mem 0xe1338000-0xe13380ff 64bit]
[    0.363939] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.364111] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.364170] pci 0000:00:1f.6: reg 0x10: [mem 0xe133b000-0xe133bfff 64bit]
[    0.364472] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.364598] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[    0.364661] pci 0000:04:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.364710] pci 0000:04:00.0: reg 0x18: [mem 0xe1200000-0xe1203fff 64bit]
[    0.364846] pci 0000:04:00.0: supports D1 D2
[    0.364850] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.372556] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.372562] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.372569] pci 0000:00:1c.2:   bridge window [mem 0xe1200000-0xe12fffff]
[    0.372692] pci 0000:05:00.0: [1002:6604] type 00 class 0x038000
[    0.372744] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.372767] pci 0000:05:00.0: reg 0x18: [mem 0xe1100000-0xe113ffff 64bit]
[    0.372782] pci 0000:05:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.372810] pci 0000:05:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.372863] pci 0000:05:00.0: supports D1 D2
[    0.372866] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.384565] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.384572] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.384578] pci 0000:00:1c.4:   bridge window [mem 0xe1100000-0xe11fffff]
[    0.384587] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.384726] pci 0000:06:00.0: [10ec:5227] type 00 class 0xff0000
[    0.384864] pci 0000:06:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff]
[    0.385261] pci 0000:06:00.0: supports D1 D2
[    0.385265] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.396607] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.396616] pci 0000:00:1c.5:   bridge window [mem 0xe1000000-0xe10fffff]
[    0.399192] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.399353] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
[    0.399593] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.399597] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.399605] vgaarb: loaded
[    0.399607] vgaarb: bridge control possible 0000:00:02.0
[    0.399942] PCI: Using ACPI for IRQ routing
[    0.402080] PCI: pci_cache_line_size set to 64 bytes
[    0.402170] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.402174] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[    0.402178] e820: reserve RAM buffer [mem 0xabd9c000-0xabffffff]
[    0.402181] e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
[    0.402184] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
[    0.402541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.402553] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.404613] clocksource: Switched to clocksource hpet
[    0.417502] pnp: PnP ACPI init
[    0.418440] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.418448] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.418452] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.418457] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.418461] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.418466] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.418470] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.418474] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.418479] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.418483] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.418487] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.418491] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.418496] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.418500] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.418505] system 00:00: [mem 0x00100000-0xafffffff] could not be reserved
[    0.418509] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.418517] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.418740] system 00:01: [io  0x1800-0x189f] could not be reserved
[    0.418746] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.418750] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.418754] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.418759] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.418763] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.418768] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.418772] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.418776] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.418780] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.418789] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.418794] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.418798] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.418802] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.418807] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.418811] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.418817] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.418968] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.419026] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.419082] pnp 00:04: Plug and Play ACPI device, IDs LEN200c PNP0f13 (active)
[    0.420152] system 00:05: [mem 0xb0010000-0xb001ffff] has been reserved
[    0.420157] system 00:05: [mem 0xb0000000-0xb000ffff] has been reserved
[    0.420163] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.420259] pnp: PnP ACPI: found 6 devices
[    0.428741] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.428758] pci 0000:05:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.428809] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.428828] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.428833] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.428842] pci 0000:00:1c.2:   bridge window [mem 0xe1200000-0xe12fffff]
[    0.428859] pci 0000:05:00.0: BAR 6: assigned [mem 0xe1140000-0xe115ffff pref]
[    0.428864] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.428868] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.428876] pci 0000:00:1c.4:   bridge window [mem 0xe1100000-0xe11fffff]
[    0.428883] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.428893] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.428901] pci 0000:00:1c.5:   bridge window [mem 0xe1000000-0xe10fffff]
[    0.428916] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.428920] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.428925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.428929] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfebfffff window]
[    0.428933] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.428937] pci_bus 0000:04: resource 1 [mem 0xe1200000-0xe12fffff]
[    0.428940] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.428944] pci_bus 0000:05: resource 1 [mem 0xe1100000-0xe11fffff]
[    0.428948] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.428952] pci_bus 0000:06: resource 1 [mem 0xe1000000-0xe10fffff]
[    0.429079] NET: Registered protocol family 2
[    0.429516] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.429701] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.429834] TCP: Hash tables configured (established 32768 bind 32768)
[    0.429889] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.429925] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.430070] NET: Registered protocol family 1
[    0.430105] pci 0000:00:02.0: Video device with shadowed ROM
[    0.430767] PCI: CLS 64 bytes, default 64
[    0.430875] Unpacking initramfs...
[    1.940131] Freeing initrd memory: 34064K (ffff880033d68000 - ffff880035eac000)
[    1.940158] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.940163] software IO TLB [mem 0x9cb6d000-0xa0b6d000] (64MB) mapped at [ffff88009cb6d000-ffff8800a0b6cfff]
[    1.940298] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    1.940302] hw unit of domain pp0-core 2^-14 Joules
[    1.940304] hw unit of domain package 2^-14 Joules
[    1.940306] hw unit of domain dram 2^-14 Joules
[    1.940309] hw unit of domain pp1-gpu 2^-14 Joules
[    1.940397] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    1.940400] ------------[ cut here ]------------
[    1.940410] WARNING: CPU: 2 PID: 1 at /build/linux-fp2fJ4/linux-4.2.6/arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2ee/0x360()
[    1.940412] Info: mapping multiple BARs. Your kernel is fine.
[    1.940415] Modules linked in:

[    1.940439] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.2.0-1-amd64 #1 Debian 4.2.6-3
[    1.940442] Hardware name: LENOVO 20DFA008CD/20DFA008CD, BIOS J5ET49WW (1.20 ) 10/22/2015
[    1.940446]  0000000000000000 ffffffff817e7270 ffffffff8154f6c3 ffff880149bbfbf8
[    1.940452]  ffffffff8106e5b1 ffffc90000778000 0000000000006000 ffffc90000778000
[    1.940458]  0000000000006000 0000000000000000 ffffffff8106e62a ffffffff817e72d0
[    1.940463] Call Trace:
[    1.940473]  [<ffffffff8154f6c3>] ? dump_stack+0x40/0x50
[    1.940480]  [<ffffffff8106e5b1>] ? warn_slowpath_common+0x81/0xb0
[    1.940486]  [<ffffffff8106e62a>] ? warn_slowpath_fmt+0x4a/0x50
[    1.940491]  [<ffffffff810742a3>] ? iomem_map_sanity_check+0xb3/0xc0
[    1.940496]  [<ffffffff8105dade>] ? __ioremap_caller+0x2ee/0x360
[    1.940505]  [<ffffffff81036ae6>] ? snb_uncore_imc_init_box+0x66/0x90
[    1.940511]  [<ffffffff810351a8>] ? uncore_pci_probe+0xc8/0x1a0
[    1.940517]  [<ffffffff81303f6f>] ? local_pci_probe+0x3f/0xa0
[    1.940524]  [<ffffffff81305094>] ? pci_device_probe+0xc4/0x110
[    1.940532]  [<ffffffff813dac9e>] ? driver_probe_device+0x1ee/0x450
[    1.940539]  [<ffffffff813daf7b>] ? __driver_attach+0x7b/0x80
[    1.940545]  [<ffffffff813daf00>] ? driver_probe_device+0x450/0x450
[    1.940551]  [<ffffffff813d8aea>] ? bus_for_each_dev+0x5a/0x90
[    1.940557]  [<ffffffff813da211>] ? bus_add_driver+0x1f1/0x290
[    1.940563]  [<ffffffff81b37faa>] ? uncore_cpu_setup+0xc/0xc
[    1.940567]  [<ffffffff813db8bf>] ? driver_register+0x5f/0xe0
[    1.940573]  [<ffffffff81b38076>] ? intel_uncore_init+0xcc/0x2b0
[    1.940578]  [<ffffffff81b37faa>] ? uncore_cpu_setup+0xc/0xc
[    1.940584]  [<ffffffff8100213e>] ? do_one_initcall+0xce/0x200
[    1.940589]  [<ffffffff8108a100>] ? parse_args+0x160/0x4e0
[    1.940596]  [<ffffffff81b2b0cb>] ? kernel_init_freeable+0x162/0x1e8
[    1.940602]  [<ffffffff815457c0>] ? rest_init+0x80/0x80
[    1.940607]  [<ffffffff815457ce>] ? kernel_init+0xe/0xf0
[    1.940612]  [<ffffffff8155521f>] ? ret_from_fork+0x3f/0x70
[    1.940617]  [<ffffffff815457c0>] ? rest_init+0x80/0x80
[    1.940626] ---[ end trace dcd87388468ef33a ]---
[    1.940784] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1f
[    1.940801] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1f
[    1.940813] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1f
[    1.940828] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1f
[    1.940936] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.941213] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x12c000 bytes, mapped to 0xffffc90000800000
[    1.941218] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    1.943150] Console: switching to colour frame buffer device 80x30
[    1.944862] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    1.945560] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.945652] audit: initializing netlink subsys (disabled)
[    1.945693] audit: type=2000 audit(1453162645.848:1): initialized
[    1.946666] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.946721] zpool: loaded
[    1.946729] zbud: loaded
[    1.947048] VFS: Disk quotas dquot_6.6.0
[    1.947086] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.947909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.947980] io scheduler noop registered
[    1.947988] io scheduler deadline registered
[    1.948018] io scheduler cfq registered (default)
[    1.949009] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.949030] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.949098] intel_idle: MWAIT substates: 0x11142120
[    1.949100] intel_idle: v0.4 model 0x3D
[    1.949103] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.949724] GHES: HEST is not enabled!
[    1.949885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.950770] Linux agpgart interface v0.103
[    1.950916] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.950918] AMD IOMMUv2 functionality not available on this system
[    1.951800] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.959655] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.959665] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.960032] mousedev: PS/2 mouse device common for all mice
[    1.960116] rtc_cmos 00:02: RTC can wake from S4
[    1.960367] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.960402] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.960426] Intel P-state driver initializing.
[    1.960683] ledtrig-cpu: registered to indicate activity on CPUs
[    1.962158] NET: Registered protocol family 10
[    1.962646] mip6: Mobile IPv6
[    1.962654] NET: Registered protocol family 17
[    1.962666] mpls_gso: MPLS GSO support
[    1.963590] registered taskstats version 1
[    1.963632] zswap: loading zswap
[    1.963638] zswap: using zbud pool
[    1.963644] zswap: using lzo compressor
[    1.964781] rtc_cmos 00:02: setting system clock to 2016-01-19 00:17:26 UTC (1453162646)
[    1.964964] PM: Hibernation image not present or could not be loaded.
[    1.965678] Freeing unused kernel memory: 1292K (ffffffff81b13000 - ffffffff81c56000)
[    1.965682] Write protecting the kernel read-only data: 10240k
[    1.966280] Freeing unused kernel memory: 652K (ffff88000175d000 - ffff880001800000)
[    1.966556] Freeing unused kernel memory: 1348K (ffff880001aaf000 - ffff880001c00000)
[    1.968785] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.974939] random: systemd-udevd urandom read with 15 bits of entropy available
[    1.988158] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.988816] ACPI: Lid Switch [LID]
[    1.988899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.988904] ACPI: Power Button [PWRF]
[    1.993706] wmi: Mapper loaded
[    1.995348] pps_core: LinuxPPS API ver. 1 registered
[    1.995351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.995409] [drm] Initialized drm 1.1.0 20060810
[    1.995623] PTP clock support registered
[    1.996989] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[    1.996991] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.997166] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.997662] ACPI: bus type USB registered
[    1.997701] usbcore: registered new interface driver usbfs
[    1.997712] usbcore: registered new interface driver hub
[    1.997745] usbcore: registered new device driver usb
[    1.997869] rtsx_pci 0000:06:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[    2.005823] [drm] radeon kernel modesetting enabled.
[    2.005836] VGA switcheroo: detected switching method \_SB_.PCI0.VID_.ATPX handle
[    2.006827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.006992] ehci-pci: EHCI PCI platform driver
[    2.008809] SCSI subsystem initialized
[    2.010604] CRAT table not found
[    2.010607] Finished initializing topology ret=0
[    2.010646] kfd kfd: Initialized module
[    2.011042] libata version 3.00 loaded.
[    2.011986] checking generic (d0000000 12c000) vs hw (c0000000 10000000)
[    2.012197] thermal LNXTHERM:00: registered as thermal_zone0
[    2.012200] ACPI: Thermal Zone [THM0] (25 C)
[    2.012261] [drm] initializing kernel modesetting (OLAND 0x1002:0x6604 0x17AA:0x5021).
[    2.012276] [drm] register mmio base: 0xE1100000
[    2.012277] [drm] register mmio size: 262144
[    2.047595] ACPI Error: Field [TBF3] at 294912 exceeds Buffer [NULL] size 262144 (bits) (20150619/dsopcode-236)
[    2.047600] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.GETB] (Node ffff88014a0b8a68), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
[    2.047605] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.ATRM] (Node ffff88014a0b8a90), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
[    2.047609] failed to evaluate ATRM got AE_AML_BUFFER_LIMIT
[    2.047612] ATOM BIOS: Lenovo
[    2.047624] [drm] GPU not posted. posting now...
[    2.051024] radeon 0000:05:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    2.051026] radeon 0000:05:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    2.051027] [drm] Detected VRAM RAM=2048M, BAR=256M
[    2.051028] [drm] RAM width 128bits DDR
[    2.051096] [TTM] Zone  kernel: Available graphics memory: 1983166 kiB
[    2.051096] [TTM] Initializing pool allocator
[    2.051100] [TTM] Initializing DMA pool allocator
[    2.051114] [drm] radeon: 2048M of VRAM memory ready
[    2.051115] [drm] radeon: 2048M of GTT memory ready.
[    2.051123] [drm] Loading oland Microcode
[    2.051141] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_pfp.bin
[    2.051150] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_me.bin
[    2.051159] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_ce.bin
[    2.051168] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_rlc.bin
[    2.051182] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_mc.bin
[    2.051202] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/oland_smc.bin
[    2.051205] [drm] Internal thermal controller with fan control
[    2.051269] [drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[    2.058755] [drm] radeon: dpm initialized
[    2.058811] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
[    2.058841] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/TAHITI_vce.bin
[    2.060700] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    2.060705] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    2.062173] [drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[    2.062177] [drm] PCIE gen 2 link speeds already enabled
[    2.066128] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[    2.066243] radeon 0000:05:00.0: WB enabled
[    2.066246] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880034804c00
[    2.066247] radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880034804c04
[    2.066248] radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880034804c08
[    2.066250] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880034804c0c
[    2.066251] radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880034804c10
[    2.067816] radeon 0000:05:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90000c35a18
[    2.168402] radeon 0000:05:00.0: VCE init error (-110).
[    2.168429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.168430] [drm] Driver supports precise vblank timestamp query.
[    2.168432] radeon 0000:05:00.0: radeon: MSI limited to 32-bit
[    2.168459] radeon 0000:05:00.0: radeon: using MSI.
[    2.168492] [drm] radeon: irq initialized.
[    2.285529] e1000e 0000:00:19.0 eth0: registered PHC clock
[    2.285533] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:71:74:b2
[    2.285535] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.285562] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    2.285694] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.285701] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.285797] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    2.285803] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.285888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.285890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.285892] usb usb1: Product: xHCI Host Controller
[    2.285893] usb usb1: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    2.285895] usb usb1: SerialNumber: 0000:00:14.0
[    2.286036] hub 1-0:1.0: USB hub found
[    2.286056] hub 1-0:1.0: 11 ports detected
[    2.286252] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.287149] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.287154] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.287216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.287218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.287219] usb usb2: Product: xHCI Host Controller
[    2.287220] usb usb2: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[    2.287221] usb usb2: SerialNumber: 0000:00:14.0
[    2.287337] hub 2-0:1.0: USB hub found
[    2.287347] hub 2-0:1.0: 4 ports detected
[    2.360894] [drm] ring test on 0 succeeded in 1 usecs
[    2.360899] [drm] ring test on 1 succeeded in 1 usecs
[    2.360904] [drm] ring test on 2 succeeded in 1 usecs
[    2.360912] [drm] ring test on 3 succeeded in 4 usecs
[    2.360919] [drm] ring test on 4 succeeded in 4 usecs
[    2.536800] [drm] ring test on 5 succeeded in 2 usecs
[    2.536805] [drm] UVD initialized successfully.
[    2.537013] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.537044] [drm] ib test on ring 1 succeeded in 0 usecs
[    2.537074] [drm] ib test on ring 2 succeeded in 0 usecs
[    2.537104] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.537132] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.598839] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    2.729226] usb 1-1: New USB device found, idVendor=046d, idProduct=c52e
[    2.729229] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.729231] usb 1-1: Product: USB Receiver
[    2.729232] usb 1-1: Manufacturer: Logitech
[    2.731358] hidraw: raw HID events driver (C) Jiri Kosina
[    2.734385] usbcore: registered new interface driver usbhid
[    2.734387] usbhid: USB HID core driver
[    2.735006] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52E.0001/input/input4
[    2.791265] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[    2.791515] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input5
[    2.847390] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[    2.895164] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.939224] tsc: Refined TSC clocksource calibration: 2194.919 MHz
[    2.939231] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa372fc492, max_idle_ns: 440795285018 ns
[    3.024492] usb 1-7: New USB device found, idVendor=0bda, idProduct=b728
[    3.024495] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.024497] usb 1-7: Product: Bluetooth Radio 
[    3.024498] usb 1-7: Manufacturer: Realtek 
[    3.024499] usb 1-7: SerialNumber: 00e04c000001
[    3.187573] [drm] ib test on ring 5 succeeded
[    3.188345] [drm] Radeon Display Connectors
[    3.191489] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    3.197104] radeon 0000:05:00.0: No connectors reported connected with modes
[    3.197112] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.199250] [drm] fb mappable at 0xC06EA000
[    3.199252] [drm] vram apper at 0xC0000000
[    3.199254] [drm] size 3145728
[    3.199256] [drm] fb depth is 24
[    3.199258] [drm]    pitch is 4096
[    3.199262] checking generic (d0000000 12c000) vs hw (c0000000 10000000)
[    3.199565] radeon 0000:05:00.0: fb1: radeondrmfb frame buffer device
[    3.199570] radeon 0000:05:00.0: registered panic notifier
[    3.211526] [drm] Initialized radeon 2.43.0 20080528 for 0000:05:00.0 on minor 0
[    3.212323] [drm] Memory usable by graphics device = 4096M
[    3.212328] checking generic (d0000000 12c000) vs hw (d0000000 10000000)
[    3.212330] fb: switching to inteldrmfb from simple
[    3.212355] Console: switching to colour dummy device 80x25
[    3.212413] [drm] Replacing VGA console driver
[    3.218970] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.218972] [drm] Driver supports precise vblank timestamp query.
[    3.218992] vga_switcheroo: enabled
[    3.219019] ATPX version 1, functions 0x00000033
[    3.219127] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.231794] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.232155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.232219] ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
[    3.232385] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input7
[    3.232421] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 1
[    3.232605] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.232618] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.232634] ehci-pci 0000:00:1d.0: debug port 2
[    3.233061] fbcon: inteldrmfb (fb0) is primary device
[    3.236540] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.236553] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe133d000
[    3.371639] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.371691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.371692] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.371693] usb usb3: Product: EHCI Host Controller
[    3.371694] usb usb3: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[    3.371694] usb usb3: SerialNumber: 0000:00:1d.0
[    3.371913] hub 3-0:1.0: USB hub found
[    3.371917] hub 3-0:1.0: 3 ports detected
[    3.372098] ahci 0000:00:1f.2: version 3.0
[    3.385373] usb 1-8: New USB device found, idVendor=1bcf, idProduct=2c70
[    3.385374] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.385375] usb 1-8: Product: Integrated Camera
[    3.385376] usb 1-8: Manufacturer: J8IECN19T
[    3.387654] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[    3.387657] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst 
[    3.388175] scsi host0: ahci
[    3.388311] scsi host1: ahci
[    3.388441] scsi host2: ahci
[    3.388499] ata1: SATA max UDMA/133 abar m2048@0xe133c000 port 0xe133c100 irq 45
[    3.388501] ata2: SATA max UDMA/133 abar m2048@0xe133c000 port 0xe133c180 irq 45
[    3.388501] ata3: DUMMY
[    3.683992] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.708018] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.708032] ata2: SATA link down (SStatus 0 SControl 300)
[    3.709079] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.709081] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.710139] ata1.00: ATA-8: HGST HTS725050A7E630, GS2ZC360, max UDMA/133
[    3.710140] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.711352] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.711354] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.712401] ata1.00: configured for UDMA/133
[    3.816501] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[    3.816502] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.816734] hub 3-1:1.0: USB hub found
[    3.816878] hub 3-1:1.0: 8 ports detected
[    3.940355] clocksource: Switched to clocksource tsc
[    4.371662] Console: switching to colour frame buffer device 170x48
[    4.376546] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.376876] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 C360 PQ: 0 ANSI: 5
[    4.382079] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.382091] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.382154] sd 0:0:0:0: [sda] Write Protect is off
[    4.382160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.382187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.445794]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    4.446463] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.890352] random: nonblocking pool is initialized
[    6.005671] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.775317] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.775445] systemd[1]: Detected architecture x86-64.
[    6.780977] systemd[1]: Set hostname to <chenxi-pc>.
[    7.944093] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.944180] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.944266] systemd[1]: Created slice User and Session Slice.
[    7.944275] systemd[1]: Reached target Swap.
[    7.944299] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.944355] systemd[1]: Created slice System Slice.
[    7.944425] systemd[1]: Created slice system-postgresql.slice.
[    7.944431] systemd[1]: Reached target Slices.
[    7.944474] systemd[1]: Created slice system-getty.slice.
[    7.944519] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.944542] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.944561] systemd[1]: Listening on udev Kernel Socket.
[    7.944580] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.944600] systemd[1]: Listening on Journal Socket.
[    7.944899] systemd[1]: Mounting Huge Pages File System...
[    7.945178] systemd[1]: Mounting POSIX Message Queue File System...
[    7.969905] systemd[1]: Starting Load Kernel Modules...
[    7.969985] systemd[1]: Reached target User and Group Name Lookups.
[    7.970042] systemd[1]: Listening on udev Control Socket.
[    7.970066] systemd[1]: Reached target Encrypted Volumes.
[    7.970512] systemd[1]: Mounting Debug File System...
[    7.970569] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.971068] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.971136] systemd[1]: Listening on Syslog Socket.
[    7.971674] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.971844] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.998920] systemd[1]: Starting Set Up Additional Binary Formats...
[    7.998936] systemd[1]: Reached target Remote File Systems (Pre).
[    7.998984] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.999061] systemd[1]: Listening on Journal Audit Socket.
[    7.999431] systemd[1]: Starting Journal Service...
[    7.999444] systemd[1]: Reached target Remote File Systems.
[    7.999765] systemd[1]: Starting LSB: Set console font and keymap...
[    8.000940] systemd[1]: Started LSB: Set console font and keymap.
[    8.060965] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 201 (systemd-binfmt)
[    8.061346] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    8.142456] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.142967] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.151125] lp: driver loaded but no devices found
[    8.287941] ppdev: user-space parallel port driver
[    8.315098] systemd[1]: Started Load Kernel Modules.
[    8.315686] systemd[1]: Starting Apply Kernel Variables...
[    8.339265] systemd[1]: Mounted Debug File System.
[    8.339379] systemd[1]: Mounted Huge Pages File System.
[    8.339452] systemd[1]: Mounted POSIX Message Queue File System.
[    8.396103] systemd[1]: Started Journal Service.
[    8.956317] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[    9.132671] systemd-journald[202]: Received request to flush runtime journal from PID 1
[    9.594162] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.601611] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.677582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.694984] ACPI: Battery Slot [BAT0] (battery present)
[    9.736431] ACPI: AC Adapter [AC] (off-line)
[    9.750880] Non-volatile memory driver v1.3
[    9.756648] EFI Variables Facility v0.08 2004-May-17
[    9.911877] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   10.224018] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   10.231913] pstore: Registered efi as persistent store backend
[   10.247377] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.247559] rtlwifi: rtlwifi: wireless switch is on
[   10.251941] rtl8723be 0000:04:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
[   10.347914] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   10.347917] thinkpad_acpi: http://ibm-acpi.sf.net/
[   10.347918] thinkpad_acpi: ThinkPad BIOS J5ET49WW (1.20 ), EC unknown
[   10.347919] thinkpad_acpi: Lenovo ThinkPad E550, model 20DFA008CD
[   10.348456] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
[   10.348485] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   10.348486] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   10.351480] media: Linux media interface: v0.10
[   10.353738] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   10.361342] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[   10.451014] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.576813] Bluetooth: Core ver 2.20
[   10.576834] NET: Registered protocol family 31
[   10.576835] Bluetooth: HCI device and connection manager initialized
[   10.576839] Bluetooth: HCI socket layer initialized
[   10.576841] Bluetooth: L2CAP socket layer initialized
[   10.576845] Bluetooth: SCO socket layer initialized
[   10.624940] usbcore: registered new interface driver btusb
[   10.626492] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   10.626495] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   10.650279] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[   10.651533] Bluetooth: hci0: rom_version status=0 version=1
[   10.790202] Linux video capture interface: v2.00
[   10.864461] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input11
[   10.881229] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[   10.904455] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[   10.904760] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   10.904762] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.904764] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   10.904766] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[   10.904768] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[   10.904770] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[   10.904772] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[   10.905532] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[   10.906133] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   10.906202] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   10.906264] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   10.909659] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   10.909788] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   10.909832] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   11.135426] uvcvideo: Found UVC 1.00 device Integrated Camera (1bcf:2c70)
[   11.142853] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
[   11.142906] usbcore: registered new interface driver uvcvideo
[   11.142907] USB Video Class driver (1.1.1)
[   11.644493] iTCO_vendor_support: vendor-support=0
[   11.798957] AVX2 version of gcm_enc/dec engaged.
[   11.798960] AES CTR mode by8 optimization enabled
[   11.870883] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.870923] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[   11.871022] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.075526] wl: module license 'MIXED/Proprietary' taints kernel.
[   12.075531] Disabling lock debugging due to kernel taint
[   12.125398] rtl8723be 0000:04:00.0 wlp4s0: renamed from wlan0
[   12.326092] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[   13.212263] intel_rapl: Found RAPL domain package
[   13.212269] intel_rapl: Found RAPL domain core
[   13.212273] intel_rapl: Found RAPL domain dram
[   13.946897] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[   14.147218] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   15.856763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.856766] Bluetooth: BNEP filters: protocol multicast
[   15.856770] Bluetooth: BNEP socket layer initialized
[   19.369161] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   19.575972] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   19.577871] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   20.344526] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   21.006935] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   22.414944] [drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[   22.414948] [drm] PCIE gen 2 link speeds already enabled
[   22.422034] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[   22.422137] radeon 0000:05:00.0: WB enabled
[   22.422139] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880034804c00
[   22.422141] radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880034804c04
[   22.422142] radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880034804c08
[   22.422143] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880034804c0c
[   22.422145] radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880034804c10
[   22.423711] radeon 0000:05:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90000c35a18
[   22.524269] radeon 0000:05:00.0: VCE init error (-110).
[   22.530062] wlp4s0: authenticate with 80:89:17:10:96:44
[   22.543751] wlp4s0: send auth to 80:89:17:10:96:44 (try 1/3)
[   22.547521] wlp4s0: authenticated
[   22.550829] wlp4s0: associate with 80:89:17:10:96:44 (try 1/3)
[   22.559584] wlp4s0: RX AssocResp from 80:89:17:10:96:44 (capab=0x431 status=0 aid=7)
[   22.560298] wlp4s0: associated
[   22.560329] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   22.592874] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[   22.724001] [drm] ring test on 0 succeeded in 1 usecs
[   22.724007] [drm] ring test on 1 succeeded in 1 usecs
[   22.724011] [drm] ring test on 2 succeeded in 1 usecs
[   22.724020] [drm] ring test on 3 succeeded in 4 usecs
[   22.724027] [drm] ring test on 4 succeeded in 4 usecs
[   22.899911] [drm] ring test on 5 succeeded in 1 usecs
[   22.899918] [drm] UVD initialized successfully.
[   22.900560] [drm] ib test on ring 0 succeeded in 0 usecs
[   22.900600] [drm] ib test on ring 1 succeeded in 0 usecs
[   22.900630] [drm] ib test on ring 2 succeeded in 0 usecs
[   22.900659] [drm] ib test on ring 3 succeeded in 0 usecs
[   22.901329] [drm] ib test on ring 4 succeeded in 0 usecs
[   23.052492] [drm] ib test on ring 5 succeeded
[   35.872456] Bluetooth: RFCOMM TTY layer initialized
[   35.872463] Bluetooth: RFCOMM socket layer initialized
[   35.872469] Bluetooth: RFCOMM ver 1.11
[   36.583353] fuse init (API version 7.23)
[  103.109811] plugin-containe[1782]: segfault at 0 ip 00007f6e4cfdb8b7 sp 00007ffc21578588 error 6 in libmozgtk.so[7f6e4cfdb000+1000]
[  336.754651] plugin-containe[2171]: segfault at 0 ip 00007f259d232912 sp 00007ffc5c82ba48 error 6 in libmozgtk.so[7f259d232000+1000]
[  354.348505] plugin-containe[2185]: segfault at 0 ip 00007f60b85de912 sp 00007ffc492d64a8 error 6 in libmozgtk.so[7f60b85de000+1000]
[  379.902510] plugin-containe[2195]: segfault at 0 ip 00007f1609a4d912 sp 00007ffdaa9a2388 error 6 in libmozgtk.so[7f1609a4d000+1000]
[  382.912136] plugin-containe[2214]: segfault at 0 ip 00007f3f2186f912 sp 00007ffc27c63b08 error 6 in libmozgtk.so[7f3f2186f000+1000]
[  383.473711] plugin-containe[2239]: segfault at 0 ip 00007fd89cef9912 sp 00007ffef4e4e8b8 error 6 in libmozgtk.so[7fd89cef9000+1000]
[  392.966930] plugin-containe[2249]: segfault at 0 ip 00007f0e959d0912 sp 00007fff704588d8 error 6 in libmozgtk.so[7f0e959d0000+1000]
[  393.761740] plugin-containe[2266]: segfault at 0 ip 00007fbd70af6912 sp 00007ffcfe12ccc8 error 6 in libmozgtk.so[7fbd70af6000+1000]
[  395.444435] plugin-containe[2277]: segfault at 0 ip 00007f8310b7b912 sp 00007ffc8bfaa2f8 error 6 in libmozgtk.so[7f8310b7b000+1000]
[  396.113310] plugin-containe[2293]: segfault at 0 ip 00007fabfcf17912 sp 00007fffe360c3d8 error 6 in libmozgtk.so[7fabfcf17000+1000]
[  396.950097] plugin-containe[2303]: segfault at 0 ip 00007f005bc0c912 sp 00007ffee3394a48 error 6 in libmozgtk.so[7f005bc0c000+1000]
[  413.032823] plugin-containe[2313]: segfault at 0 ip 00007f1ac6577912 sp 00007ffcae3dc448 error 6 in libmozgtk.so[7f1ac6577000+1000]
[  413.179301] plugin-containe[2340]: segfault at 0 ip 00007faf76c8c912 sp 00007ffd724fa958 error 6 in libmozgtk.so[7faf76c8c000+1000]
[  471.995783] plugin-containe[2417]: segfault at 0 ip 00007f433643c912 sp 00007ffdee409d08 error 6 in libmozgtk.so[7f433643c000+1000]
[  941.377332] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1072.649140] plugin-containe[3676]: segfault at 0 ip 00007f1c0b410912 sp 00007ffc70b22e68 error 6 in libmozgtk.so[7f1c0b410000+1000]
[ 2545.476043] plugin-containe[5601]: segfault at 0 ip 00007f1f417558b7 sp 00007fff0ba2a3a8 error 6 in libmozgtk.so[7f1f41755000+1000]
[ 2549.551056] plugin-containe[5613]: segfault at 0 ip 00007f72d0cc48b7 sp 00007ffdc9d88d08 error 6 in libmozgtk.so[7f72d0cc4000+1000]
[ 2560.368994] deepin-metacity[806]: segfault at 100000000 ip 00007f4db95cc340 sp 00007ffff88d2f38 error 4 in libdeepin-metacity-private.so.3.0.0[7f4db958b000+c3000]
[ 2588.579704] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 2588.591088] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 2589.604008] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 2589.614943] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 2635.147012] plugin-containe[5712]: segfault at 0 ip 00007fa4383b9912 sp 00007ffc79da1ff8 error 6 in libmozgtk.so[7fa4383b9000+1000]
[ 2658.914032] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 2658.924957] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 2659.938590] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 2659.950004] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 2684.033247] plugin-containe[5746]: segfault at 0 ip 00007f3232c60912 sp 00007ffdbe413438 error 6 in libmozgtk.so[7f3232c60000+1000]
[ 2759.664997] plugin-containe[5790]: segfault at 0 ip 00007fc40178d912 sp 00007fff6aadf3e8 error 6 in libmozgtk.so[7fc40178d000+1000]
[ 3656.068160] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 3656.079568] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 3658.116848] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 3658.127772] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 3760.943795] plugin-containe[6437]: segfault at 0 ip 00007ffa7bdf7912 sp 00007ffeac6db2d8 error 6 in libmozgtk.so[7ffa7bdf7000+1000]
[ 4420.053749] plugin-containe[6919]: segfault at 0 ip 00007f836342e912 sp 00007ffe1a6ef798 error 6 in libmozgtk.so[7f836342e000+1000]
[ 4525.684369] plugin-containe[7020]: segfault at 0 ip 00007f4fe88e6912 sp 00007ffe12268db8 error 6 in libmozgtk.so[7f4fe88e6000+1000]
[ 5295.098436] plugin-containe[7614]: segfault at 0 ip 00007fb64792a912 sp 00007ffdb7829d88 error 6 in libmozgtk.so[7fb64792a000+1000]
[ 5315.850954] plugin-containe[7625]: segfault at 0 ip 00007fb14701c912 sp 00007fff70811bd8 error 6 in libmozgtk.so[7fb14701c000+1000]
[ 5321.893295] plugin-containe[7660]: segfault at 0 ip 00007f5f6809b912 sp 00007ffeb4e47d58 error 6 in libmozgtk.so[7f5f6809b000+1000]
[ 6327.208181] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 6327.219569] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 6327.914435] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 6327.925697] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 6647.139178] plugin-containe[8940]: segfault at 0 ip 00007fb3bedda912 sp 00007fff7ae8fa08 error 6 in libmozgtk.so[7fb3bedda000+1000]
[ 6883.412331] perf interrupt took too long (5079 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 6893.535694] plugin-containe[9030]: segfault at 0 ip 00007fc685a3e912 sp 00007ffde2c0c448 error 6 in libmozgtk.so[7fc685a3e000+1000]
[ 6898.578053] plugin-containe[9042]: segfault at 0 ip 00007fba0758c912 sp 00007ffc9042b588 error 6 in libmozgtk.so[7fba0758c000+1000]
[ 6899.651715] plugin-containe[9053]: segfault at 0 ip 00007f959aac6912 sp 00007ffe74824058 error 6 in libmozgtk.so[7f959aac6000+1000]
[ 6913.225689] plugin-containe[9063]: segfault at 0 ip 00007f846ff8c912 sp 00007ffe10190588 error 6 in libmozgtk.so[7f846ff8c000+1000]
[ 6918.708873] plugin-containe[9080]: segfault at 0 ip 00007f2c37dc2912 sp 00007fff280422a8 error 6 in libmozgtk.so[7f2c37dc2000+1000]
[ 7022.463218] plugin-containe[9134]: segfault at 0 ip 00007f827003e912 sp 00007ffcc0485d98 error 6 in libmozgtk.so[7f827003e000+1000]
[ 7023.382940] plugin-containe[9145]: segfault at 0 ip 00007f4bfe989912 sp 00007ffd3327dc88 error 6 in libmozgtk.so[7f4bfe989000+1000]
[ 7097.921569] plugin-containe[9183]: segfault at 0 ip 00007f2f07200912 sp 00007ffde3988428 error 6 in libmozgtk.so[7f2f07200000+1000]
[ 7113.547031] plugin-containe[9193]: segfault at 0 ip 00007fe4dee4d912 sp 00007ffe452e2278 error 6 in libmozgtk.so[7fe4dee4d000+1000]
[ 7113.916358] plugin-containe[9211]: segfault at 0 ip 00007fd0f41c4912 sp 00007ffd2120bc28 error 6 in libmozgtk.so[7fd0f41c4000+1000]
[ 7114.465016] plugin-containe[9221]: segfault at 0 ip 00007f986707e912 sp 00007ffd95b1f788 error 6 in libmozgtk.so[7f986707e000+1000]
[ 7134.098966] plugin-containe[9246]: segfault at 0 ip 00007fa792d60912 sp 00007ffd58e3c5e8 error 6 in libmozgtk.so[7fa792d60000+1000]
[ 8268.782460] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8268.793485] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8270.732332] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8270.743438] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8276.769831] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8276.781221] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8277.792445] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8277.803860] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8630.788778] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8630.799678] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8632.736650] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8632.747599] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8639.797989] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8639.809365] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8640.826620] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8640.837545] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8641.743291] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8641.754379] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8643.790755] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8643.802170] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8673.892799] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8673.903862] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8674.811484] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8674.822427] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8705.319368] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8705.330596] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8706.448073] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8706.459157] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8714.533701] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8714.545742] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8715.455092] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8715.466354] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8723.543032] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8723.554577] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8729.595346] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8729.606756] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8752.617695] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8752.628762] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8755.586905] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8755.597823] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8758.658246] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8758.669149] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8759.681889] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8759.693470] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8769.612409] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8769.623791] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8771.660188] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8771.671586] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8772.687196] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8772.698100] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8773.707460] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8773.718869] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8826.739034] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8826.750414] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8831.756571] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8831.767653] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8840.867482] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8840.879065] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8843.938635] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8843.950034] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8844.962709] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8844.973611] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8849.711435] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8849.722841] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8849.722937] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8849.734992] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8852.026206] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8852.037102] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8858.066504] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 8858.077417] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 8859.090262] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 8859.101318] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9102.544911] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9102.555978] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9103.567388] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9103.578820] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9105.614887] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9105.625791] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9106.537287] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9106.548862] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9113.600347] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9113.611671] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9114.624115] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9114.635701] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9115.648423] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9115.659812] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9118.719055] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9118.730299] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9120.664235] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9120.675617] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9122.609732] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9122.621153] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9147.692004] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9147.702912] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9148.715966] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9148.727359] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9178.916935] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9178.928011] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9181.898087] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9181.909491] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9185.981521] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9185.992600] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9186.902763] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9186.913691] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9191.918900] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9191.929801] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9192.953465] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9192.964873] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9193.966473] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9193.977865] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9195.017008] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9195.028910] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9196.021764] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9196.033807] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9196.942151] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9196.954702] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9202.978023] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9202.988944] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9210.044565] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9210.055490] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9233.074548] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9233.085454] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9234.099080] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9234.110162] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9236.043723] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9236.054648] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9237.067413] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9237.078985] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9277.608820] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9277.619718] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9278.632944] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9278.644509] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9635.881944] ------------[ cut here ]------------
[ 9635.881993] WARNING: CPU: 0 PID: 0 at /build/linux-fp2fJ4/linux-4.2.6/drivers/gpu/drm/i915/intel_display.c:11100 intel_check_page_flip+0xf2/0x100 [i915]()
[ 9635.881995] Kicking stuck page flip: queued at 484893, now 484897
[ 9635.881996] Modules linked in: snd_seq_dummy snd_seq snd_seq_device fuse rfcomm ctr ccm bnep nls_utf8 nls_cp437 vfat fat x86_pkg_temp_thermal intel_powerclamp intel_rapl iosf_mbi coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng wl(PO) iTCO_wdt aesni_intel iTCO_vendor_support joydev aes_x86_64 lrw uvcvideo gf128mul glue_helper videobuf2_vmalloc snd_hda_codec_conexant snd_hda_codec_hdmi snd_hda_codec_generic ablk_helper cryptd videobuf2_memops videobuf2_core v4l2_common videodev rtsx_pci_ms memstick btusb btrtl btbcm btintel bluetooth snd_hda_intel snd_hda_codec media thinkpad_acpi arc4 efi_pstore rtl8723be btcoexist rtl8723_common rtl_pci rtlwifi snd_hda_core snd_hwdep snd_pcm mac80211 cfg80211 pcspkr snd_timer efivars nvram psmouse ac serio_raw
[ 9635.882047]  snd sg mei_me battery i2c_i801 shpchp soundcore rfkill mei lpc_ich evdev processor binfmt_misc parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 md_mod sd_mod hid_generic usbhid hid rtsx_pci_sdmmc mmc_core crc32c_intel ahci libahci libata amdkfd scsi_mod ehci_pci ehci_hcd radeon xhci_pci ttm i915 xhci_hcd rtsx_pci i2c_algo_bit mfd_core e1000e usbcore drm_kms_helper ptp pps_core usb_common drm thermal wmi video thermal_sys button
[ 9635.882084] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P        W  O    4.2.0-1-amd64 #1 Debian 4.2.6-3
[ 9635.882086] Hardware name: LENOVO 20DFA008CD/20DFA008CD, BIOS J5ET49WW (1.20 ) 10/22/2015
[ 9635.882088]  0000000000000000 ffffffffa02b12a0 ffffffff8154f6c3 ffff88014ec03e08
[ 9635.882091]  ffffffff8106e5b1 ffff8801477c3000 ffff880147b0a000 ffff8801477c31a8
[ 9635.882094]  0000000000000000 ffff880074b7eac0 ffffffff8106e62a ffffffffa02b47d0
[ 9635.882097] Call Trace:
[ 9635.882098]  <IRQ>  [<ffffffff8154f6c3>] ? dump_stack+0x40/0x50
[ 9635.882106]  [<ffffffff8106e5b1>] ? warn_slowpath_common+0x81/0xb0
[ 9635.882109]  [<ffffffff8106e62a>] ? warn_slowpath_fmt+0x4a/0x50
[ 9635.882130]  [<ffffffffa0248993>] ? __intel_pageflip_stall_check+0xf3/0x100 [i915]
[ 9635.882149]  [<ffffffffa02582d2>] ? intel_check_page_flip+0xf2/0x100 [i915]
[ 9635.882165]  [<ffffffffa02252d1>] ? gen8_irq_handler+0x321/0x520 [i915]
[ 9635.882168]  [<ffffffff810bd84b>] ? handle_irq_event_percpu+0x6b/0x180
[ 9635.882172]  [<ffffffff8101c325>] ? read_tsc+0x5/0x10
[ 9635.882174]  [<ffffffff810bd9a0>] ? handle_irq_event+0x40/0x60
[ 9635.882177]  [<ffffffff810c098b>] ? handle_edge_irq+0x7b/0x140
[ 9635.882180]  [<ffffffff81015edd>] ? handle_irq+0x1d/0x30
[ 9635.882183]  [<ffffffff815579b6>] ? do_IRQ+0x46/0xd0
[ 9635.882185]  [<ffffffff8155596b>] ? common_interrupt+0x6b/0x6b
[ 9635.882186]  <EOI>  [<ffffffff8142bb48>] ? cpuidle_enter_state+0xe8/0x220
[ 9635.882192]  [<ffffffff8142bb23>] ? cpuidle_enter_state+0xc3/0x220
[ 9635.882195]  [<ffffffff810aa126>] ? cpu_startup_entry+0x256/0x310
[ 9635.882200]  [<ffffffff81b2af5e>] ? start_kernel+0x480/0x48b
[ 9635.882203]  [<ffffffff81b2a120>] ? early_idt_handler_array+0x120/0x120
[ 9635.882205]  [<ffffffff81b2a120>] ? early_idt_handler_array+0x120/0x120
[ 9635.882208]  [<ffffffff81b2a605>] ? x86_64_start_kernel+0x148/0x157
[ 9635.882210] ---[ end trace dcd87388468ef33c ]---
[ 9666.617270] plugin-containe[10107]: segfault at 0 ip 00007f4246209912 sp 00007ffcb2c1aaf8 error 6 in libmozgtk.so[7f4246209000+1000]
[ 9751.718318] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9751.729569] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9752.742028] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9752.752954] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9753.765913] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 9753.777305] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[ 9754.687191] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[ 9754.698939] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10184.364839] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[10184.375747] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10186.310925] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[10186.321849] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10198.391253] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[10198.402795] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10199.414368] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[10199.425775] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10229.410850] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[10229.422434] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[10230.537323] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[10230.549212] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[11248.624944] plugin-containe[11854]: segfault at 0 ip 00007feba1cc5912 sp 00007ffc5c69d768 error 6 in libmozgtk.so[7feba1cc5000+1000]
[11895.716498] plugin-containe[12597]: segfault at 0 ip 00007fd3daa4c912 sp 00007ffebd15b0b8 error 6 in libmozgtk.so[7fd3daa4c000+1000]
[11899.785778] plugin-containe[12610]: segfault at 0 ip 00007f4239383912 sp 00007ffe4d03fd98 error 6 in libmozgtk.so[7f4239383000+1000]
[11901.973039] plugin-containe[12621]: segfault at 0 ip 00007f01c7c44912 sp 00007ffd18731ec8 error 6 in libmozgtk.so[7f01c7c44000+1000]
[11902.490374] plugin-containe[12631]: segfault at 0 ip 00007f6907002912 sp 00007ffc4c229a28 error 6 in libmozgtk.so[7f6907002000+1000]
[12049.275928] plugin-containe[12694]: segfault at 0 ip 00007f081f0d98b7 sp 00007fff7d3c9098 error 6 in libmozgtk.so[7f081f0d9000+1000]
[12049.773658] plugin-containe[12704]: segfault at 0 ip 00007f53f64f2912 sp 00007ffcda567088 error 6 in libmozgtk.so[7f53f64f2000+1000]
[12064.422681] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[12064.433758] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[12065.344543] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[12065.355622] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[12082.771038] plugin-containe[12739]: segfault at 0 ip 00007f2a4bd55912 sp 00007ffcbcbe0198 error 6 in libmozgtk.so[7f2a4bd55000+1000]
[13942.987598] plugin-containe[13723]: segfault at 0 ip 00007fcb08dda8b7 sp 00007ffcdb88f768 error 6 in libmozgtk.so[7fcb08dda000+1000]
[14277.513185] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14277.525219] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14278.536959] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14278.548372] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14682.722720] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14682.734270] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14684.770429] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14684.781321] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14694.803235] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14694.814612] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14695.827519] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14695.838917] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14714.869238] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14714.880795] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14715.794039] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14715.804958] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14718.863140] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14718.874525] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14719.887074] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14719.897990] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14720.807112] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14720.818663] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14721.830805] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14721.841754] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14729.816606] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14729.827508] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14735.547494] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14735.558897] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14740.873646] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14740.884559] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14741.898797] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14741.909688] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14743.841978] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14743.853213] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14744.873525] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14744.884450] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14745.889527] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14745.900930] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14746.919803] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14746.931214] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14774.541742] plugin-containe[13996]: segfault at 0 ip 00007f9126a39912 sp 00007ffdae38d0d8 error 6 in libmozgtk.so[7f9126a39000+1000]
[14785.179137] plugin-containe[14009]: segfault at 0 ip 00007fa0bd247912 sp 00007fff1b591ed8 error 6 in libmozgtk.so[7fa0bd247000+1000]
[14788.804784] plugin-containe[14019]: segfault at 0 ip 00007f67d0f9a912 sp 00007ffdec059358 error 6 in libmozgtk.so[7f67d0f9a000+1000]
[14793.745859] plugin-containe[14035]: segfault at 0 ip 00007f2152434912 sp 00007ffd44d6f928 error 6 in libmozgtk.so[7f2152434000+1000]
[14794.702391] plugin-containe[14050]: segfault at 0 ip 00007f4c65685912 sp 00007ffc63d573b8 error 6 in libmozgtk.so[7f4c65685000+1000]
[14795.657739] plugin-containe[14062]: segfault at 0 ip 00007f8708d0e912 sp 00007fffec313238 error 6 in libmozgtk.so[7f8708d0e000+1000]
[14796.383652] plugin-containe[14078]: segfault at 0 ip 00007fc081b38912 sp 00007fff996fccb8 error 6 in libmozgtk.so[7fc081b38000+1000]
[14797.500427] plugin-containe[14089]: segfault at 0 ip 00007f95f0ede912 sp 00007ffcff52f178 error 6 in libmozgtk.so[7f95f0ede000+1000]
[14798.830620] plugin-containe[14099]: segfault at 0 ip 00007fca02c03912 sp 00007ffec64c3238 error 6 in libmozgtk.so[7fca02c03000+1000]
[14818.182505] plugin-containe[14124]: segfault at 0 ip 00007f2a7406e912 sp 00007ffc19143868 error 6 in libmozgtk.so[7f2a7406e000+1000]
[14921.364285] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14921.375999] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14922.286448] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14922.298540] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14945.424318] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14945.435382] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14946.344277] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14946.356048] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14955.528588] plugin-containe[14332]: segfault at 0 ip 00007f898e7fa912 sp 00007fffc0434738 error 6 in libmozgtk.so[7f898e7fa000+1000]
[14959.814139] plugin-containe[14345]: segfault at 0 ip 00007f8da92af912 sp 00007ffc6f1b3638 error 6 in libmozgtk.so[7f8da92af000+1000]
[14968.422626] plugin-containe[14355]: segfault at 0 ip 00007f94ff915912 sp 00007fff987a1538 error 6 in libmozgtk.so[7f94ff915000+1000]
[14969.178415] plugin-containe[14371]: segfault at 0 ip 00007ffb6ceb2912 sp 00007ffdfa6d5af8 error 6 in libmozgtk.so[7ffb6ceb2000+1000]
[14996.509691] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[14996.521249] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[14998.556744] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[14998.568631] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15005.518245] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15005.529787] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15006.549001] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15006.560414] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15036.241493] plugin-containe[14408]: segfault at 0 ip 00007f7630a158b7 sp 00007ffc9b81bce8 error 6 in libmozgtk.so[7f7630a15000+1000]
[15128.067506] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15128.078432] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15131.135570] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15131.147479] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15138.097206] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15138.108111] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15139.120824] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15139.131914] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15151.201809] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15151.213223] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15154.170291] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15154.181235] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15193.280142] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15193.291011] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15194.216097] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15194.229204] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15196.014554] plugin-containe[14525]: segfault at 0 ip 00007fd80b6dd912 sp 00007ffd0475e5f8 error 6 in libmozgtk.so[7fd80b6dd000+1000]
[15206.281971] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15206.294023] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15207.304509] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15207.316088] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15220.306721] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15220.318294] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15221.330070] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15221.340993] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15231.362824] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15231.374559] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15232.387374] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15232.399823] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15235.356480] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15235.367392] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15236.382247] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15236.393451] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15242.420070] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15242.430970] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15244.364897] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15244.376305] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15246.413213] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15246.424649] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15247.437992] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15247.449592] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15253.373558] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15253.384989] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15254.398676] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15254.410249] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15258.492965] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15258.504371] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15259.516724] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15259.529443] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15260.541194] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15260.552352] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15261.564138] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15261.576046] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15270.573590] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15270.585872] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15271.597088] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15271.608015] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15288.694784] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15288.706863] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15289.617114] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15289.628037] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15309.681468] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15309.693702] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15310.706769] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15310.718184] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15313.674311] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15313.685706] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15315.723025] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15315.733991] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15331.795699] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15331.807212] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15336.159382] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15336.170837] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15346.844490] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15346.855493] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15347.868935] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15347.880533] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15356.877433] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15356.889383] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15357.799399] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15357.810489] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15415.949513] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15415.960440] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15416.974932] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15416.985864] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15419.942008] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15419.952929] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15420.968949] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15420.979873] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15425.982060] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15425.992987] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15428.032325] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15428.043921] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15445.024296] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15445.035193] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15446.052196] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15446.063609] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15528.257074] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[15528.268610] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15529.283766] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[15529.295177] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[15999.763827] plugin-containe[15015]: segfault at 0 ip 00007fab4704a912 sp 00007ffcf71a07c8 error 6 in libmozgtk.so[7fab4704a000+1000]
[17302.866115] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[17302.877018] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17305.943773] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[17305.955180] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17315.869868] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[17315.882943] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17318.941483] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[17318.952578] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17755.432201] plugin-containe[18169]: segfault at 0 ip 00007f8d9ebd6912 sp 00007ffd46bbe648 error 6 in libmozgtk.so[7f8d9ebd6000+1000]
[17810.453116] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[17810.464036] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17811.374726] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[17811.386153] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17820.486346] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[17820.497575] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17821.407944] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[17821.420993] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[17972.611758] plugin-containe[18254]: segfault at 0 ip 00007f8619c81912 sp 00007fff7094b668 error 6 in libmozgtk.so[7f8619c81000+1000]
[18003.639564] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[18003.650490] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[18004.766287] wlp4s0: AP 80:89:17:10:96:44 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[18004.777172] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 80:89:17:10:96:44
[18043.568705] plugin-containe[18393]: segfault at 0 ip 00007eff13d4c912 sp 00007fff2d6321a8 error 6 in libmozgtk.so[7eff13d4c000+1000]
[18051.435659] plugin-containe[18406]: segfault at 0 ip 00007f4dd8bad912 sp 00007ffe38f4e058 error 6 in libmozgtk.so[7f4dd8bad000+1000]
[18255.406438] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[18255.535245] usb 1-2: New USB device found, idVendor=2717, idProduct=0360
[18255.535249] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18255.535250] usb 1-2: Product: MI 4LTE
[18255.535252] usb 1-2: Manufacturer: Xiaomi
[18255.535253] usb 1-2: SerialNumber: c6cd2c20
[18256.333176] usb-storage 1-2:1.1: USB Mass Storage device detected
[18256.333242] scsi host3: usb-storage 1-2:1.1
[18256.333331] usbcore: registered new interface driver usb-storage
[18256.494889] usbcore: registered new interface driver uas
[18257.332688] scsi 3:0:0:0: Direct-Access     Linux    File-Stor Gadget 0000 PQ: 0 ANSI: 2
[18257.332926] sd 3:0:0:0: Attached scsi generic sg1 type 0
[18257.333436] sd 3:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[18257.333606] sd 3:0:0:0: [sdb] Write Protect is on
[18257.333609] sd 3:0:0:0: [sdb] Mode Sense: 0f 00 80 00
[18257.333778] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[18257.334640] sd 3:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[18257.337618] sd 3:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[18257.338076] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[18299.352834] plugin-containe[18540]: segfault at 0 ip 00007f7d40155912 sp 00007fffb47cace8 error 6 in libmozgtk.so[7f7d40155000+1000]
[18321.573358] plugin-containe[18552]: segfault at 0 ip 00007f7bffe08912 sp 00007ffef73aa478 error 6 in libmozgtk.so[7f7bffe08000+1000]
[18330.294106] plugin-containe[18571]: segfault at 0 ip 00007f74e82c3912 sp 00007ffc364e9578 error 6 in libmozgtk.so[7f74e82c3000+1000]
[18332.745709] plugin-containe[18587]: segfault at 0 ip 00007f98f4a67912 sp 00007ffe02569198 error 6 in libmozgtk.so[7f98f4a67000+1000]
[18406.924129] plugin-containe[18638]: segfault at 0 ip 00007fa63195f912 sp 00007fff873df738 error 6 in libmozgtk.so[7fa63195f000+1000]
[18516.401606] plugin-containe[18744]: segfault at 0 ip 00007f339fd1d912 sp 00007ffd5253f588 error 6 in libmozgtk.so[7f339fd1d000+1000]
[18575.219026] plugin-containe[18754]: segfault at 0 ip 00007fd048d8d8b7 sp 00007fff7575e728 error 6 in libmozgtk.so[7fd048d8d000+1000]
[18607.200086] plugin-containe[18795]: segfault at 0 ip 00007f2283cab8b7 sp 00007ffc5edfc978 error 6 in libmozgtk.so[7f2283cab000+1000]
[18646.972714] plugin-containe[18817]: segfault at 0 ip 00007fe1bc1bb8b7 sp 00007ffe5c66a528 error 6 in libmozgtk.so[7fe1bc1bb000+1000]
[18747.030081] usb 1-2: USB disconnect, device number 5
[19189.125209] plugin-containe[19030]: segfault at 0 ip 00007fdb79443912 sp 00007ffcd7db6938 error 6 in libmozgtk.so[7fdb79443000+1000]
[20601.280817] plugin-containe[20026]: segfault at 0 ip 00007f62a4b6a912 sp 00007fff6347c6c8 error 6 in libmozgtk.so[7f62a4b6a000+1000]
[20901.133567] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[20901.262866] usb 1-2: New USB device found, idVendor=2717, idProduct=0360
[20901.262869] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20901.262871] usb 1-2: Product: MI 4LTE
[20901.262872] usb 1-2: Manufacturer: Xiaomi
[20901.262873] usb 1-2: SerialNumber: c6cd2c20
[20901.264050] usb-storage 1-2:1.1: USB Mass Storage device detected
[20901.264129] scsi host4: usb-storage 1-2:1.1
[20902.263034] scsi 4:0:0:0: Direct-Access     Linux    File-Stor Gadget 0000 PQ: 0 ANSI: 2
[20902.263266] sd 4:0:0:0: Attached scsi generic sg1 type 0
[20902.263843] sd 4:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[20902.264017] sd 4:0:0:0: [sdb] Write Protect is on
[20902.264021] sd 4:0:0:0: [sdb] Mode Sense: 0f 00 80 00
[20902.264183] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[20902.264982] sd 4:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[20902.266662] sd 4:0:0:0: [sdb] 5586 2048-byte logical blocks: (11.1 MB/10.9 MiB)
[20902.267186] sd 4:0:0:0: [sdb] Attached SCSI removable disk
